]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blame - arch/arm/boot/dts/sun7i-a20-mk808c.dts
Merge tag 'mac80211-for-davem-2016-02-23' of git://git.kernel.org/pub/scm/linux/kerne...
[mirror_ubuntu-artful-kernel.git] / arch / arm / boot / dts / sun7i-a20-mk808c.dts
CommitLineData
94a3e0c4
MC
1/*
2 * Copyright 2015 Marcus Cooper
3 *
4 * Marcus Cooper <codekipper@gmail.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public
22 * License along with this file; if not, write to the Free
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
24 * MA 02110-1301 USA
25 *
26 * Or, alternatively,
27 *
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
35 * conditions:
36 *
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
39 *
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
48 */
49
50/dts-v1/;
51#include "sun7i-a20.dtsi"
52#include "sunxi-common-regulators.dtsi"
53
54#include <dt-bindings/gpio/gpio.h>
55#include <dt-bindings/interrupt-controller/irq.h>
56
57/ {
58 model = "mk808c";
59 compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
60
61 aliases {
62 serial0 = &uart0;
63 serial1 = &uart2;
64 };
65
66 chosen {
67 stdout-path = "serial0:115200n8";
68 };
69};
70
8661d0c3
MC
71&codec {
72 status = "okay";
73};
74
94a3e0c4
MC
75&ehci0 {
76 status = "okay";
77};
78
79&ehci1 {
80 status = "okay";
81};
82
83&i2c0 {
84 pinctrl-names = "default";
85 pinctrl-0 = <&i2c0_pins_a>;
86 status = "okay";
87
88 axp209: pmic@34 {
89 compatible = "x-powers,axp209";
90 reg = <0x34>;
91 interrupt-parent = <&nmi_intc>;
92 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
93 interrupt-controller;
94 #interrupt-cells = <1>;
95 };
96};
97
98&i2c1 {
99 pinctrl-names = "default";
100 pinctrl-0 = <&i2c1_pins_a>;
101 status = "okay";
102};
103
104&i2c2 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&i2c2_pins_a>;
107 status = "okay";
108};
109
110&mmc0 {
111 pinctrl-names = "default";
112 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
113 vmmc-supply = <&reg_vcc3v0>;
114 bus-width = <4>;
115 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
116 cd-inverted;
117 status = "okay";
118};
119
120&ohci0 {
121 status = "okay";
122};
123
124&ohci1 {
125 status = "okay";
126};
127
128&reg_usb1_vbus {
129 status = "okay";
130};
131
132&reg_usb2_vbus {
133 status = "okay";
134};
135
136&uart0 {
137 pinctrl-names = "default";
138 pinctrl-0 = <&uart0_pins_a>;
139 status = "okay";
140};
141
142&uart2 {
143 pinctrl-names = "default";
144 pinctrl-0 = <&uart2_pins_a>;
145 status = "okay";
146};
147
148&usbphy {
149 usb1_vbus-supply = <&reg_usb1_vbus>;
150 usb2_vbus-supply = <&reg_usb2_vbus>;
151 status = "okay";
152};