]>
Commit | Line | Data |
---|---|---|
359b5a1e CYT |
1 | /* |
2 | * Copyright 2017 Chen-Yu Tsai | |
3 | * | |
4 | * Chen-Yu Tsai <wens@csie.org> | |
5 | * | |
6 | * This file is dual-licensed: you can use it either under the terms | |
7 | * of the GPL or the X11 license, at your option. Note that this dual | |
8 | * licensing only applies to this file, and not this project as a | |
9 | * whole. | |
10 | * | |
11 | * a) This file is free software; you can redistribute it and/or | |
12 | * modify it under the terms of the GNU General Public License as | |
13 | * published by the Free Software Foundation; either version 2 of the | |
14 | * License, or (at your option) any later version. | |
15 | * | |
16 | * This file is distributed in the hope that it will be useful, | |
17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | * GNU General Public License for more details. | |
20 | * | |
21 | * Or, alternatively, | |
22 | * | |
23 | * b) Permission is hereby granted, free of charge, to any person | |
24 | * obtaining a copy of this software and associated documentation | |
25 | * files (the "Software"), to deal in the Software without | |
26 | * restriction, including without limitation the rights to use, | |
27 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
28 | * sell copies of the Software, and to permit persons to whom the | |
29 | * Software is furnished to do so, subject to the following | |
30 | * conditions: | |
31 | * | |
32 | * The above copyright notice and this permission notice shall be | |
33 | * included in all copies or substantial portions of the Software. | |
34 | * | |
35 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
36 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
37 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
38 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
39 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
40 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
41 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
42 | * OTHER DEALINGS IN THE SOFTWARE. | |
43 | */ | |
44 | ||
45 | /dts-v1/; | |
46 | #include "sun8i-a83t.dtsi" | |
359b5a1e CYT |
47 | |
48 | #include <dt-bindings/gpio/gpio.h> | |
49 | ||
50 | / { | |
51 | model = "Banana Pi BPI-M3"; | |
52 | compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t"; | |
53 | ||
54 | aliases { | |
03935994 | 55 | ethernet0 = &emac; |
359b5a1e CYT |
56 | serial0 = &uart0; |
57 | }; | |
58 | ||
59 | chosen { | |
60 | stdout-path = "serial0:115200n8"; | |
61 | }; | |
d7c5f686 | 62 | |
f978b05e JS |
63 | connector { |
64 | compatible = "hdmi-connector"; | |
65 | type = "a"; | |
66 | ||
67 | port { | |
68 | hdmi_con_in: endpoint { | |
69 | remote-endpoint = <&hdmi_out_con>; | |
70 | }; | |
71 | }; | |
72 | }; | |
73 | ||
9ae65654 CYT |
74 | leds { |
75 | compatible = "gpio-leds"; | |
76 | ||
77 | blue { | |
78 | label = "bananapi-m3:blue:usr"; | |
79 | gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; | |
80 | }; | |
81 | ||
82 | green { | |
83 | label = "bananapi-m3:green:usr"; | |
84 | gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; | |
85 | }; | |
86 | }; | |
87 | ||
d7c5f686 CYT |
88 | reg_usb1_vbus: reg-usb1-vbus { |
89 | compatible = "regulator-fixed"; | |
90 | regulator-name = "usb1-vbus"; | |
91 | regulator-min-microvolt = <5000000>; | |
92 | regulator-max-microvolt = <5000000>; | |
93 | regulator-boot-on; | |
94 | enable-active-high; | |
95 | gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ | |
96 | }; | |
337cce7e CYT |
97 | |
98 | wifi_pwrseq: wifi_pwrseq { | |
99 | compatible = "mmc-pwrseq-simple"; | |
100 | clocks = <&ac100_rtc 1>; | |
101 | clock-names = "ext_clock"; | |
102 | /* The WiFi low power clock must be 32768 Hz */ | |
103 | assigned-clocks = <&ac100_rtc 1>; | |
104 | assigned-clock-rates = <32768>; | |
105 | /* enables internal regulator and de-asserts reset */ | |
106 | reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ | |
107 | }; | |
359b5a1e CYT |
108 | }; |
109 | ||
75ab9393 CYT |
110 | &cpu0 { |
111 | cpu-supply = <®_dcdc2>; | |
112 | }; | |
113 | ||
114 | &cpu100 { | |
115 | cpu-supply = <®_dcdc3>; | |
116 | }; | |
117 | ||
f978b05e JS |
118 | &de { |
119 | status = "okay"; | |
120 | }; | |
121 | ||
359b5a1e CYT |
122 | &ehci0 { |
123 | /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ | |
124 | status = "okay"; | |
125 | ||
126 | /* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */ | |
127 | }; | |
128 | ||
03935994 CYT |
129 | &emac { |
130 | pinctrl-names = "default"; | |
131 | pinctrl-0 = <&emac_rgmii_pins>; | |
132 | phy-supply = <®_sw>; | |
133 | phy-handle = <&rgmii_phy>; | |
134 | phy-mode = "rgmii"; | |
135 | allwinner,rx-delay-ps = <700>; | |
136 | allwinner,tx-delay-ps = <700>; | |
137 | status = "okay"; | |
138 | }; | |
139 | ||
f978b05e JS |
140 | &hdmi { |
141 | status = "okay"; | |
142 | }; | |
143 | ||
144 | &hdmi_out { | |
145 | hdmi_out_con: endpoint { | |
146 | remote-endpoint = <&hdmi_con_in>; | |
147 | }; | |
148 | }; | |
149 | ||
03935994 CYT |
150 | &mdio { |
151 | rgmii_phy: ethernet-phy@1 { | |
152 | compatible = "ethernet-phy-ieee802.3-c22"; | |
153 | reg = <1>; | |
154 | }; | |
155 | }; | |
156 | ||
359b5a1e CYT |
157 | &mmc0 { |
158 | pinctrl-names = "default"; | |
159 | pinctrl-0 = <&mmc0_pins>; | |
d7c5f686 | 160 | vmmc-supply = <®_dcdc1>; |
359b5a1e | 161 | bus-width = <4>; |
45e01f40 | 162 | cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
359b5a1e CYT |
163 | status = "okay"; |
164 | }; | |
165 | ||
337cce7e CYT |
166 | &mmc1 { |
167 | vmmc-supply = <®_dldo1>; | |
168 | vqmmc-supply = <®_dldo1>; | |
169 | mmc-pwrseq = <&wifi_pwrseq>; | |
170 | bus-width = <4>; | |
171 | non-removable; | |
172 | status = "okay"; | |
173 | ||
174 | brcmf: wifi@1 { | |
175 | reg = <1>; | |
176 | compatible = "brcm,bcm4329-fmac"; | |
177 | interrupt-parent = <&r_pio>; | |
178 | interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; | |
179 | interrupt-names = "host-wake"; | |
180 | }; | |
181 | }; | |
182 | ||
359b5a1e CYT |
183 | &mmc2 { |
184 | pinctrl-names = "default"; | |
185 | pinctrl-0 = <&mmc2_8bit_emmc_pins>; | |
d7c5f686 CYT |
186 | vmmc-supply = <®_dcdc1>; |
187 | vqmmc-supply = <®_dcdc1>; | |
359b5a1e CYT |
188 | bus-width = <8>; |
189 | non-removable; | |
190 | cap-mmc-hw-reset; | |
191 | status = "okay"; | |
192 | }; | |
193 | ||
6f26c238 PR |
194 | &r_cir { |
195 | clock-frequency = <3000000>; | |
196 | status = "okay"; | |
197 | }; | |
198 | ||
359b5a1e CYT |
199 | &r_rsb { |
200 | status = "okay"; | |
201 | ||
202 | axp81x: pmic@3a3 { | |
203 | compatible = "x-powers,axp813"; | |
204 | reg = <0x3a3>; | |
205 | interrupt-parent = <&r_intc>; | |
206 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
d7c5f686 CYT |
207 | eldoin-supply = <®_dcdc1>; |
208 | fldoin-supply = <®_dcdc5>; | |
209 | swin-supply = <®_dcdc1>; | |
210 | x-powers,drive-vbus-en; | |
359b5a1e CYT |
211 | }; |
212 | ||
213 | ac100: codec@e89 { | |
214 | compatible = "x-powers,ac100"; | |
215 | reg = <0xe89>; | |
216 | ||
217 | ac100_codec: codec { | |
218 | compatible = "x-powers,ac100-codec"; | |
219 | interrupt-parent = <&r_pio>; | |
220 | interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ | |
221 | #clock-cells = <0>; | |
222 | clock-output-names = "4M_adda"; | |
223 | }; | |
224 | ||
225 | ac100_rtc: rtc { | |
226 | compatible = "x-powers,ac100-rtc"; | |
227 | interrupt-parent = <&r_intc>; | |
228 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
229 | clocks = <&ac100_codec>; | |
230 | #clock-cells = <1>; | |
231 | clock-output-names = "cko1_rtc", | |
232 | "cko2_rtc", | |
233 | "cko3_rtc"; | |
234 | }; | |
235 | }; | |
236 | }; | |
237 | ||
d7c5f686 CYT |
238 | #include "axp81x.dtsi" |
239 | ||
185401e1 CYT |
240 | &ac_power_supply { |
241 | status = "okay"; | |
242 | }; | |
243 | ||
244 | &battery_power_supply { | |
245 | status = "okay"; | |
246 | }; | |
247 | ||
d7c5f686 CYT |
248 | ®_aldo1 { |
249 | regulator-always-on; | |
250 | regulator-min-microvolt = <1800000>; | |
251 | regulator-max-microvolt = <1800000>; | |
252 | regulator-name = "vcc-1v8"; | |
253 | }; | |
254 | ||
255 | ®_aldo2 { | |
256 | regulator-always-on; | |
257 | regulator-min-microvolt = <1800000>; | |
258 | regulator-max-microvolt = <1800000>; | |
259 | regulator-name = "dram-pll"; | |
260 | }; | |
261 | ||
262 | ®_aldo3 { | |
263 | regulator-always-on; | |
264 | regulator-min-microvolt = <3000000>; | |
265 | regulator-max-microvolt = <3000000>; | |
266 | regulator-name = "avcc"; | |
267 | }; | |
268 | ||
269 | ®_dcdc1 { | |
270 | /* schematics says 3.1V but FEX file says 3.3V */ | |
271 | regulator-always-on; | |
272 | regulator-min-microvolt = <3300000>; | |
273 | regulator-max-microvolt = <3300000>; | |
274 | regulator-name = "vcc-3v3"; | |
275 | }; | |
276 | ||
277 | ®_dcdc2 { | |
278 | regulator-always-on; | |
279 | regulator-min-microvolt = <700000>; | |
280 | regulator-max-microvolt = <1100000>; | |
281 | regulator-name = "vdd-cpua"; | |
282 | }; | |
283 | ||
284 | ®_dcdc3 { | |
285 | regulator-always-on; | |
286 | regulator-min-microvolt = <700000>; | |
287 | regulator-max-microvolt = <1100000>; | |
288 | regulator-name = "vdd-cpub"; | |
289 | }; | |
290 | ||
291 | ®_dcdc4 { | |
292 | regulator-min-microvolt = <700000>; | |
293 | regulator-max-microvolt = <1100000>; | |
294 | regulator-name = "vdd-gpu"; | |
295 | }; | |
296 | ||
297 | ®_dcdc5 { | |
298 | regulator-always-on; | |
299 | regulator-min-microvolt = <1200000>; | |
300 | regulator-max-microvolt = <1200000>; | |
301 | regulator-name = "vcc-dram"; | |
302 | }; | |
303 | ||
304 | ®_dcdc6 { | |
305 | regulator-always-on; | |
306 | regulator-min-microvolt = <900000>; | |
307 | regulator-max-microvolt = <900000>; | |
308 | regulator-name = "vdd-sys"; | |
309 | }; | |
310 | ||
311 | ®_dldo1 { | |
312 | /* | |
313 | * This powers both the WiFi/BT module's main power, I/O supply, | |
314 | * and external pull-ups on all the data lines. It should be set | |
315 | * to the same voltage as the I/O supply (DCDC1 in this case) to | |
316 | * avoid any leakage or mismatch. | |
317 | */ | |
318 | regulator-min-microvolt = <3300000>; | |
319 | regulator-max-microvolt = <3300000>; | |
320 | regulator-name = "vcc-wifi"; | |
321 | }; | |
322 | ||
323 | ®_dldo3 { | |
324 | regulator-always-on; | |
5f8208f5 CL |
325 | regulator-min-microvolt = <3300000>; |
326 | regulator-max-microvolt = <3300000>; | |
d7c5f686 CYT |
327 | regulator-name = "vcc-pd"; |
328 | }; | |
329 | ||
330 | ®_drivevbus { | |
331 | regulator-name = "usb0-vbus"; | |
359b5a1e CYT |
332 | status = "okay"; |
333 | }; | |
334 | ||
d7c5f686 CYT |
335 | ®_fldo1 { |
336 | regulator-min-microvolt = <1080000>; | |
337 | regulator-max-microvolt = <1320000>; | |
338 | regulator-name = "vdd12-hsic"; | |
339 | }; | |
340 | ||
341 | ®_fldo2 { | |
342 | /* | |
343 | * Despite the embedded CPUs core not being used in any way, | |
344 | * this must remain on or the system will hang. | |
345 | */ | |
346 | regulator-always-on; | |
347 | regulator-min-microvolt = <700000>; | |
348 | regulator-max-microvolt = <1100000>; | |
349 | regulator-name = "vdd-cpus"; | |
350 | }; | |
351 | ||
352 | ®_rtc_ldo { | |
353 | regulator-name = "vcc-rtc"; | |
359b5a1e CYT |
354 | }; |
355 | ||
d7c5f686 CYT |
356 | ®_sw { |
357 | /* | |
358 | * The PHY requires 20ms after all voltages | |
359 | * are applied until core logic is ready and | |
360 | * 30ms after the reset pin is de-asserted. | |
361 | * Set a 100ms delay to account for PMIC | |
362 | * ramp time and board traces. | |
363 | */ | |
364 | regulator-enable-ramp-delay = <100000>; | |
365 | regulator-name = "vcc-ephy"; | |
359b5a1e CYT |
366 | }; |
367 | ||
368 | &uart0 { | |
369 | pinctrl-names = "default"; | |
370 | pinctrl-0 = <&uart0_pb_pins>; | |
371 | status = "okay"; | |
372 | }; | |
373 | ||
afdd273e CYT |
374 | &uart1 { |
375 | pinctrl-names = "default"; | |
376 | pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; | |
377 | uart-has-rtscts; | |
378 | status = "okay"; | |
379 | ||
380 | bluetooth { | |
381 | compatible = "brcm,bcm43438-bt"; | |
382 | clocks = <&ac100_rtc 1>; | |
383 | clock-names = "lpo"; | |
384 | vbat-supply = <®_dldo1>; | |
385 | vddio-supply = <®_dldo1>; | |
386 | device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ | |
387 | host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ | |
388 | shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ | |
389 | }; | |
390 | }; | |
391 | ||
359b5a1e CYT |
392 | &usbphy { |
393 | usb1_vbus-supply = <®_usb1_vbus>; | |
394 | status = "okay"; | |
395 | }; |