[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / sun9i-a80-cubieboard4.dts

/*
 * Copyright 2015 Tyler Baker
 *
 * Tyler Baker <tyler.baker@linaro.org>
 * Chen-Yu Tsai <wens@csie.org>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun9i-a80.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Cubietech Cubieboard4";
	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";

	aliases {
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	leds {
		compatible = "gpio-leds";

		green {
			label = "cubieboard4:green:usr";
			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
		};

		red {
			label = "cubieboard4:red:usr";
			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
		};
	};

	vga-connector {
		compatible = "vga-connector";
		label = "vga";
		ddc-i2c-bus = <&i2c3>;

		port {
			vga_con_in: endpoint {
				remote-endpoint = <&vga_dac_out>;
			};
		};
	};

	vga-dac {
		compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
		vdd-supply = <&reg_dcdc1>;
		#address-cells = <1>;
		#size-cells = <0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0>;

				vga_dac_in: endpoint@0 {
					reg = <0>;
					remote-endpoint = <&tcon0_out_vga>;
				};
			};

			port@1 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <1>;

				vga_dac_out: endpoint@0 {
					reg = <0>;
					remote-endpoint = <&vga_con_in>;
				};
			};
		};
	};

	wifi_pwrseq: wifi-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&ac100_rtc 1>;
		clock-names = "ext_clock";
		/* enables internal regulator and de-asserts reset */
		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
	};
};

&de {
	status = "okay";
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;
	status = "okay";
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins>;
	vmmc-supply = <&reg_dcdc1>;
	bus-width = <4>;
	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */
	status = "okay";
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&reg_dldo1>;
	vqmmc-supply = <&reg_cldo3>;
	mmc-pwrseq = <&wifi_pwrseq>;
	bus-width = <4>;
	non-removable;
	status = "okay";
};

&mmc1_pins {
	bias-pull-up;
};

&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_8bit_pins>;
	vmmc-supply = <&reg_dcdc1>;
	bus-width = <8>;
	non-removable;
	cap-mmc-hw-reset;
	status = "okay";
};

&mmc2_8bit_pins {
	/* Increase drive strength for DDR modes */
	drive-strength = <40>;
};

&osc32k {
	/* osc32k input is from AC100 */
	clocks = <&ac100_rtc 0>;
};

&r_ir {
	status = "okay";
};

&r_rsb {
	status = "okay";

	axp809: pmic@3a3 {
		reg = <0x3a3>;
		interrupt-parent = <&nmi_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

		regulators {
			reg_aldo1: aldo1 {
				/*
				 * TODO: This should be handled by the
				 * USB PHY driver.
				 */
				regulator-always-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "vcc33-usbh";
			};

			reg_aldo2: aldo2 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-pb-io-cam";
			};

			aldo3 {
				/* unused */
			};

			reg_dc5ldo: dc5ldo {
				regulator-always-on;
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1100000>;
				regulator-name = "vdd-cpus-09-usbh";
			};

			reg_dcdc1: dcdc1 {
				regulator-always-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "vcc-3v";
			};

			reg_dcdc2: dcdc2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1100000>;
				regulator-name = "vdd-gpu";
			};

			reg_dcdc3: dcdc3 {
				regulator-always-on;
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1100000>;
				regulator-name = "vdd-cpua";
			};

			reg_dcdc4: dcdc4 {
				regulator-always-on;
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1100000>;
				regulator-name = "vdd-sys-usb0-hdmi";
			};

			reg_dcdc5: dcdc5 {
				regulator-always-on;
				regulator-min-microvolt = <1425000>;
				regulator-max-microvolt = <1575000>;
				regulator-name = "vcc-dram";
			};

			reg_dldo1: dldo1 {
				/*
				 * The WiFi chip supports a wide range
				 * (3.0 ~ 4.8V) of voltages, and so does
				 * this regulator (3.0 ~ 4.2V), but
				 * Allwinner SDK always sets it to 3.3V.
				 */
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc-wifi";
			};

			reg_dldo2: dldo2 {
				regulator-always-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "vcc-pl";
			};

			reg_eldo1: eldo1 {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-name = "vcc-dvdd-cam";
			};

			reg_eldo2: eldo2 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc-pe";
			};

			reg_eldo3: eldo3 {
				regulator-always-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "vcc-pm-codec-io1";
			};

			reg_ldo_io0: ldo_io0 {
				regulator-always-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "vcc-pg";
			};

			reg_ldo_io1: ldo_io1 {
				regulator-min-microvolt = <2500000>;
				regulator-max-microvolt = <2500000>;
				regulator-name = "vcc-pa-gmac-2v5";
			};

			reg_rtc_ldo: rtc_ldo {
				regulator-name = "vcc-rtc-vdd1v8-io";
			};

			sw {
				/* unused */
			};
		};
	};

	axp806: pmic@745 {
		compatible = "x-powers,axp806";
		reg = <0x745>;
		interrupt-parent = <&nmi_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;
		#interrupt-cells = <1>;
		bldoin-supply = <&reg_dcdce>;

		regulators {
			reg_s_aldo1: aldo1 {
				regulator-always-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "avcc";
			};

			aldo2 {
				/*
				 * unused, but use a different name to
				 * avoid name clash with axp809's aldo's
				 */
				regulator-name = "s_aldo2";
			};

			aldo3 {
				/*
				 * unused, but use a different name to
				 * avoid name clash with axp809's aldo's
				 */
				regulator-name = "s_aldo3";
			};

			reg_bldo1: bldo1 {
				regulator-always-on;
				regulator-min-microvolt = <1700000>;
				regulator-max-microvolt = <1900000>;
				regulator-name = "vcc18-efuse-adc-display-csi";
			};

			reg_bldo2: bldo2 {
				regulator-always-on;
				regulator-min-microvolt = <1700000>;
				regulator-max-microvolt = <1900000>;
				regulator-name =
					"vdd18-drampll-vcc18-pll-cpvdd";
			};

			bldo3 {
				/* unused */
			};

			reg_bldo4: bldo4 {
				regulator-min-microvolt = <1100000>;
				regulator-max-microvolt = <1300000>;
				regulator-name = "vcc12-hsic";
			};

			reg_cldo1: cldo1 {
				/*
				 * This was 3V in the original design, but
				 * 3.3V is the recommended supply voltage
				 * for the Ethernet PHY.
				 */
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc-gmac-phy";
			};

			reg_cldo2: cldo2 {
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-name = "afvcc-cam";
			};

			reg_cldo3: cldo3 {
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "vcc-io-wifi-codec-io2";
			};

			reg_dcdca: dcdca {
				regulator-always-on;
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1100000>;
				regulator-name = "vdd-cpub";
			};

			reg_dcdcd: dcdcd {
				regulator-always-on;
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1100000>;
				regulator-name = "vdd-vpu";
			};

			reg_dcdce: dcdce {
				regulator-always-on;
				regulator-min-microvolt = <2100000>;
				regulator-max-microvolt = <2100000>;
				regulator-name = "vcc-bldo-codec-ldoin";
			};

			sw {
				/*
				 * unused, but use a different name to
				 * avoid name clash with axp809's sw
				 */
				regulator-name = "s_sw";
			};
		};
	};

	ac100: codec@e89 {
		compatible = "x-powers,ac100";
		reg = <0xe89>;

		ac100_codec: codec {
			compatible = "x-powers,ac100-codec";
			interrupt-parent = <&r_pio>;
			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
			#clock-cells = <0>;
			clock-output-names = "4M_adda";
		};

		ac100_rtc: rtc {
			compatible = "x-powers,ac100-rtc";
			interrupt-parent = <&nmi_intc>;
			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
			clocks = <&ac100_codec>;
			#clock-cells = <1>;
			clock-output-names = "cko1_rtc",
					     "cko2_rtc",
					     "cko3_rtc";
		};
	};
};

#include "axp809.dtsi"

&tcon0 {
	pinctrl-names = "default";
	pinctrl-0 = <&lcd0_rgb888_pins>;
};

&tcon0_out {
	tcon0_out_vga: endpoint@0 {
		reg = <0>;
		remote-endpoint = <&vga_dac_in>;
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_ph_pins>;
	status = "okay";
};
Commit	Line	Data
6d11c8e2 TB	1	/*
	2	* Copyright 2015 Tyler Baker
	3	*
	4	* Tyler Baker <tyler.baker@linaro.org>
	5	* Chen-Yu Tsai <wens@csie.org>
	6	*
	7	* This file is dual-licensed: you can use it either under the terms
	8	* of the GPL or the X11 license, at your option. Note that this dual
	9	* licensing only applies to this file, and not this project as a
	10	* whole.
	11	*
	12	* a) This file is free software; you can redistribute it and/or
	13	* modify it under the terms of the GNU General Public License as
	14	* published by the Free Software Foundation; either version 2 of the
	15	* License, or (at your option) any later version.
	16	*
	17	* This file is distributed in the hope that it will be useful,
	18	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	19	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	20	* GNU General Public License for more details.
	21	*
	22	* Or, alternatively,
	23	*
	24	* b) Permission is hereby granted, free of charge, to any person
	25	* obtaining a copy of this software and associated documentation
	26	* files (the "Software"), to deal in the Software without
	27	* restriction, including without limitation the rights to use,
	28	* copy, modify, merge, publish, distribute, sublicense, and/or
	29	* sell copies of the Software, and to permit persons to whom the
	30	* Software is furnished to do so, subject to the following
	31	* conditions:
	32	*
	33	* The above copyright notice and this permission notice shall be
	34	* included in all copies or substantial portions of the Software.
	35	*
	36	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	37	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	38	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	39	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	40	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	41	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	42	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	43	* OTHER DEALINGS IN THE SOFTWARE.
	44	*/
	45
	46	/dts-v1/;
	47	#include "sun9i-a80.dtsi"
6d11c8e2 TB	48
6d11c8e2 TB	49	#include <dt-bindings/gpio/gpio.h>
6d11c8e2 TB	50
	51	/ {
	52	model = "Cubietech Cubieboard4";
	53	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
	54
	55	aliases {
	56	serial0 = &uart0;
	57	};
	58
	59	chosen {
	60	stdout-path = "serial0:115200n8";
	61	};
	62
c807d6e2 CYT	63	leds {
c807d6e2 CYT	64	compatible = "gpio-leds";
c807d6e2 CYT	65
	66	green {
	67	label = "cubieboard4:green:usr";
	68	gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
	69	};
	70
	71	red {
	72	label = "cubieboard4:red:usr";
	73	gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
	74	};
	75	};
e62c46bc	76
dbb6d864 CYT	77	vga-connector {
	78	compatible = "vga-connector";
	79	label = "vga";
	80	ddc-i2c-bus = <&i2c3>;
	81
	82	port {
	83	vga_con_in: endpoint {
	84	remote-endpoint = <&vga_dac_out>;
	85	};
	86	};
	87	};
	88
	89	vga-dac {
	90	compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
	91	vdd-supply = <&reg_dcdc1>;
	92	#address-cells = <1>;
	93	#size-cells = <0>;
	94
	95	ports {
	96	#address-cells = <1>;
	97	#size-cells = <0>;
	98
	99	port@0 {
	100	#address-cells = <1>;
	101	#size-cells = <0>;
	102	reg = <0>;
	103
	104	vga_dac_in: endpoint@0 {
	105	reg = <0>;
	106	remote-endpoint = <&tcon0_out_vga>;
	107	};
	108	};
	109
	110	port@1 {
	111	#address-cells = <1>;
	112	#size-cells = <0>;
	113	reg = <1>;
	114
	115	vga_dac_out: endpoint@0 {
	116	reg = <0>;
	117	remote-endpoint = <&vga_con_in>;
	118	};
	119	};
	120	};
	121	};
	122
333bf2e6	123	wifi_pwrseq: wifi-pwrseq {
e62c46bc CYT	124	compatible = "mmc-pwrseq-simple";
	125	clocks = <&ac100_rtc 1>;
	126	clock-names = "ext_clock";
	127	/* enables internal regulator and de-asserts reset */
	128	reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
	129	};
6d11c8e2 TB	130	};
6d11c8e2 TB	131
dbb6d864 CYT	132	&de {
	133	status = "okay";
	134	};
	135
	136	&i2c3 {
	137	pinctrl-names = "default";
	138	pinctrl-0 = <&i2c3_pins>;
	139	status = "okay";
	140	};
	141
6d11c8e2 TB	142	&mmc0 {
6d11c8e2 TB	143	pinctrl-names = "default";
eb2d0fab	144	pinctrl-0 = <&mmc0_pins>;
1e1dea72	145	vmmc-supply = <&reg_dcdc1>;
6d11c8e2	146	bus-width = <4>;
45e01f40	147	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */
6d11c8e2 TB	148	status = "okay";
	149	};
	150
e62c46bc CYT	151	&mmc1 {
e62c46bc CYT	152	pinctrl-names = "default";
1848f3f4	153	pinctrl-0 = <&mmc1_pins>;
e62c46bc CYT	154	vmmc-supply = <&reg_dldo1>;
	155	vqmmc-supply = <&reg_cldo3>;
	156	mmc-pwrseq = <&wifi_pwrseq>;
	157	bus-width = <4>;
	158	non-removable;
	159	status = "okay";
	160	};
	161
	162	&mmc1_pins {
1edcd36f	163	bias-pull-up;
e62c46bc CYT	164	};
e62c46bc CYT	165
6d11c8e2 TB	166	&mmc2 {
	167	pinctrl-names = "default";
	168	pinctrl-0 = <&mmc2_8bit_pins>;
1e1dea72	169	vmmc-supply = <&reg_dcdc1>;
6d11c8e2 TB	170	bus-width = <8>;
6d11c8e2 TB	171	non-removable;
8826532c	172	cap-mmc-hw-reset;
6d11c8e2 TB	173	status = "okay";
	174	};
	175
8826532c CYT	176	&mmc2_8bit_pins {
8826532c CYT	177	/* Increase drive strength for DDR modes */
1edcd36f	178	drive-strength = <40>;
8826532c CYT	179	};
8826532c CYT	180
16266987 CYT	181	&osc32k {
	182	/* osc32k input is from AC100 */
	183	clocks = <&ac100_rtc 0>;
	184	};
	185
62b4b20c CYT	186	&r_ir {
	187	status = "okay";
	188	};
	189
6f353f61 CYT	190	&r_rsb {
6f353f61 CYT	191	status = "okay";
1e1dea72 CYT	192
	193	axp809: pmic@3a3 {
	194	reg = <0x3a3>;
	195	interrupt-parent = <&nmi_intc>;
	196	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	197
	198	regulators {
	199	reg_aldo1: aldo1 {
	200	/*
	201	* TODO: This should be handled by the
	202	* USB PHY driver.
	203	*/
	204	regulator-always-on;
	205	regulator-min-microvolt = <3000000>;
	206	regulator-max-microvolt = <3000000>;
	207	regulator-name = "vcc33-usbh";
	208	};
	209
	210	reg_aldo2: aldo2 {
	211	regulator-min-microvolt = <1800000>;
	212	regulator-max-microvolt = <1800000>;
	213	regulator-name = "vcc-pb-io-cam";
	214	};
	215
	216	aldo3 {
	217	/* unused */
	218	};
	219
	220	reg_dc5ldo: dc5ldo {
	221	regulator-always-on;
	222	regulator-min-microvolt = <800000>;
	223	regulator-max-microvolt = <1100000>;
	224	regulator-name = "vdd-cpus-09-usbh";
	225	};
	226
	227	reg_dcdc1: dcdc1 {
	228	regulator-always-on;
	229	regulator-min-microvolt = <3000000>;
	230	regulator-max-microvolt = <3000000>;
	231	regulator-name = "vcc-3v";
	232	};
	233
	234	reg_dcdc2: dcdc2 {
	235	regulator-min-microvolt = <800000>;
	236	regulator-max-microvolt = <1100000>;
	237	regulator-name = "vdd-gpu";
	238	};
	239
	240	reg_dcdc3: dcdc3 {
	241	regulator-always-on;
	242	regulator-min-microvolt = <800000>;
	243	regulator-max-microvolt = <1100000>;
	244	regulator-name = "vdd-cpua";
	245	};
	246
	247	reg_dcdc4: dcdc4 {
	248	regulator-always-on;
	249	regulator-min-microvolt = <800000>;
	250	regulator-max-microvolt = <1100000>;
	251	regulator-name = "vdd-sys-usb0-hdmi";
	252	};
	253
	254	reg_dcdc5: dcdc5 {
	255	regulator-always-on;
256	regulator-min-microvolt = <1425000>;
257	regulator-max-microvolt = <1575000>;
258	regulator-name = "vcc-dram";
259	};
260
261	reg_dldo1: dldo1 {
262	/*
263	* The WiFi chip supports a wide range
264	* (3.0 ~ 4.8V) of voltages, and so does
265	* this regulator (3.0 ~ 4.2V), but
266	* Allwinner SDK always sets it to 3.3V.
267	*/
268	regulator-min-microvolt = <3300000>;
269	regulator-max-microvolt = <3300000>;
270	regulator-name = "vcc-wifi";
271	};
272
273	reg_dldo2: dldo2 {
274	regulator-always-on;
275	regulator-min-microvolt = <3000000>;
276	regulator-max-microvolt = <3000000>;
277	regulator-name = "vcc-pl";
278	};
279
280	reg_eldo1: eldo1 {
281	regulator-min-microvolt = <1200000>;
282	regulator-max-microvolt = <1200000>;
283	regulator-name = "vcc-dvdd-cam";
284	};
285
286	reg_eldo2: eldo2 {
287	regulator-min-microvolt = <1800000>;
288	regulator-max-microvolt = <1800000>;
289	regulator-name = "vcc-pe";
290	};
291
292	reg_eldo3: eldo3 {
293	regulator-always-on;
294	regulator-min-microvolt = <3000000>;
295	regulator-max-microvolt = <3000000>;
296	regulator-name = "vcc-pm-codec-io1";
297	};
298
299	reg_ldo_io0: ldo_io0 {
300	regulator-always-on;
301	regulator-min-microvolt = <3000000>;
302	regulator-max-microvolt = <3000000>;
303	regulator-name = "vcc-pg";
304	};
305
306	reg_ldo_io1: ldo_io1 {
307	regulator-min-microvolt = <2500000>;
308	regulator-max-microvolt = <2500000>;
309	regulator-name = "vcc-pa-gmac-2v5";
310	};
311
312	reg_rtc_ldo: rtc_ldo {
313	regulator-name = "vcc-rtc-vdd1v8-io";
314	};
296450c2 CYT	315
	316	sw {
	317	/* unused */
	318	};
1e1dea72 CYT	319	};
1e1dea72 CYT	320	};
38f151d4	321
f97f02ee CYT	322	axp806: pmic@745 {
	323	compatible = "x-powers,axp806";
	324	reg = <0x745>;
	325	interrupt-parent = <&nmi_intc>;
	326	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	327	interrupt-controller;
	328	#interrupt-cells = <1>;
	329	bldoin-supply = <&reg_dcdce>;
	330
	331	regulators {
	332	reg_s_aldo1: aldo1 {
	333	regulator-always-on;
	334	regulator-min-microvolt = <3000000>;
	335	regulator-max-microvolt = <3000000>;
	336	regulator-name = "avcc";
	337	};
	338
	339	aldo2 {
	340	/*
	341	* unused, but use a different name to
	342	* avoid name clash with axp809's aldo's
	343	*/
	344	regulator-name = "s_aldo2";
	345	};
	346
	347	aldo3 {
	348	/*
	349	* unused, but use a different name to
	350	* avoid name clash with axp809's aldo's
	351	*/
	352	regulator-name = "s_aldo3";
	353	};
	354
	355	reg_bldo1: bldo1 {
	356	regulator-always-on;
	357	regulator-min-microvolt = <1700000>;
	358	regulator-max-microvolt = <1900000>;
	359	regulator-name = "vcc18-efuse-adc-display-csi";
	360	};
	361
	362	reg_bldo2: bldo2 {
	363	regulator-always-on;
	364	regulator-min-microvolt = <1700000>;
	365	regulator-max-microvolt = <1900000>;
	366	regulator-name =
	367	"vdd18-drampll-vcc18-pll-cpvdd";
	368	};
	369
	370	bldo3 {
	371	/* unused */
	372	};
	373
	374	reg_bldo4: bldo4 {
	375	regulator-min-microvolt = <1100000>;
	376	regulator-max-microvolt = <1300000>;
	377	regulator-name = "vcc12-hsic";
	378	};
	379
	380	reg_cldo1: cldo1 {
	381	/*
	382	* This was 3V in the original design, but
	383	* 3.3V is the recommended supply voltage
	384	* for the Ethernet PHY.
	385	*/
386	regulator-min-microvolt = <3300000>;
387	regulator-max-microvolt = <3300000>;
388	regulator-name = "vcc-gmac-phy";
389	};
390
391	reg_cldo2: cldo2 {
392	regulator-min-microvolt = <2800000>;
393	regulator-max-microvolt = <2800000>;
394	regulator-name = "afvcc-cam";
395	};
396
397	reg_cldo3: cldo3 {
398	regulator-min-microvolt = <3000000>;
399	regulator-max-microvolt = <3000000>;
400	regulator-name = "vcc-io-wifi-codec-io2";
401	};
402
403	reg_dcdca: dcdca {
404	regulator-always-on;
405	regulator-min-microvolt = <800000>;
406	regulator-max-microvolt = <1100000>;
407	regulator-name = "vdd-cpub";
408	};
409
410	reg_dcdcd: dcdcd {
411	regulator-always-on;
412	regulator-min-microvolt = <800000>;
413	regulator-max-microvolt = <1100000>;
414	regulator-name = "vdd-vpu";
415	};
416
417	reg_dcdce: dcdce {
418	regulator-always-on;
419	regulator-min-microvolt = <2100000>;
420	regulator-max-microvolt = <2100000>;
421	regulator-name = "vcc-bldo-codec-ldoin";
422	};
423
424	sw {
425	/*
426	* unused, but use a different name to
427	* avoid name clash with axp809's sw
428	*/
429	regulator-name = "s_sw";
430	};
431	};
432	};
433
38f151d4 CYT	434	ac100: codec@e89 {
	435	compatible = "x-powers,ac100";
	436	reg = <0xe89>;
	437
	438	ac100_codec: codec {
	439	compatible = "x-powers,ac100-codec";
	440	interrupt-parent = <&r_pio>;
	441	interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
	442	#clock-cells = <0>;
	443	clock-output-names = "4M_adda";
	444	};
	445
	446	ac100_rtc: rtc {
	447	compatible = "x-powers,ac100-rtc";
	448	interrupt-parent = <&nmi_intc>;
	449	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	450	clocks = <&ac100_codec>;
	451	#clock-cells = <1>;
	452	clock-output-names = "cko1_rtc",
	453	"cko2_rtc",
	454	"cko3_rtc";
	455	};
	456	};
6f353f61 CYT	457	};
6f353f61 CYT	458
1e1dea72 CYT	459	#include "axp809.dtsi"
1e1dea72 CYT	460
dbb6d864 CYT	461	&tcon0 {
	462	pinctrl-names = "default";
	463	pinctrl-0 = <&lcd0_rgb888_pins>;
	464	};
	465
	466	&tcon0_out {
	467	tcon0_out_vga: endpoint@0 {
	468	reg = <0>;
	469	remote-endpoint = <&vga_dac_in>;
	470	};
	471	};
	472
6d11c8e2 TB	473	&uart0 {
6d11c8e2 TB	474	pinctrl-names = "default";
d177864f	475	pinctrl-0 = <&uart0_ph_pins>;
6d11c8e2 TB	476	status = "okay";
6d11c8e2 TB	477	};