[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / tegra124-nyan.dtsi

#include <dt-bindings/input/input.h>
#include "tegra124.dtsi"

/ {
	aliases {
		rtc0 = "/i2c@7000d000/pmic@40";
		rtc1 = "/rtc@7000e000";
		serial0 = &uarta;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory {
		reg = <0x0 0x80000000 0x0 0x80000000>;
	};

	host1x@50000000 {
		hdmi@54280000 {
			status = "okay";

			vdd-supply = <&vdd_3v3_hdmi>;
			pll-supply = <&vdd_hdmi_pll>;
			hdmi-supply = <&vdd_5v0_hdmi>;

			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
			nvidia,hpd-gpio =
				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
		};

		sor@54540000 {
			status = "okay";

			nvidia,dpaux = <&dpaux>;
			nvidia,panel = <&panel>;
		};

		dpaux@545c0000 {
			vdd-supply = <&vdd_3v3_panel>;
			status = "okay";
		};
	};

	gpu@0,57000000 {
		status = "okay";

		vdd-supply = <&vdd_gpu>;
	};

	serial@70006000 {
		/* Debug connector on the bottom of the board near SD card. */
		status = "okay";
	};

	pwm@7000a000 {
		status = "okay";
	};

	i2c@7000c000 {
		status = "okay";
		clock-frequency = <100000>;

		acodec: audio-codec@10 {
			compatible = "maxim,max98090";
			reg = <0x10>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
		};

		temperature-sensor@4c {
			compatible = "ti,tmp451";
			reg = <0x4c>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;

			#thermal-sensor-cells = <1>;
		};
	};

	i2c@7000c400 {
		status = "okay";
		clock-frequency = <100000>;

		trackpad@15 {
			compatible = "elan,ekth3000";
			reg = <0x15>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
			wakeup-source;
		};
	};

	i2c@7000c500 {
		status = "okay";
		clock-frequency = <400000>;

		tpm@20 {
			compatible = "infineon,slb9645tt";
			reg = <0x20>;
		};
	};

	hdmi_ddc: i2c@7000c700 {
		status = "okay";
		clock-frequency = <100000>;
	};

	i2c@7000d000 {
		status = "okay";
		clock-frequency = <400000>;

		pmic: pmic@40 {
			compatible = "ams,as3722";
			reg = <0x40>;
			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;

			ams,system-power-controller;

			#interrupt-cells = <2>;
			interrupt-controller;

			gpio-controller;
			#gpio-cells = <2>;

			pinctrl-names = "default";
			pinctrl-0 = <&as3722_default>;

			as3722_default: pinmux {
				gpio0 {
					pins = "gpio0";
					function = "gpio";
					bias-pull-down;
				};

				gpio1 {
					pins = "gpio1";
					function = "gpio";
					bias-pull-up;
				};

				gpio2_4_7 {
					pins = "gpio2", "gpio4", "gpio7";
					function = "gpio";
					bias-pull-up;
				};

				gpio3_6 {
					pins = "gpio3", "gpio6";
					bias-high-impedance;
				};

				gpio5 {
					pins = "gpio5";
					function = "clk32k-out";
					bias-pull-down;
				};
			};

			regulators {
				vsup-sd2-supply = <&vdd_5v0_sys>;
				vsup-sd3-supply = <&vdd_5v0_sys>;
				vsup-sd4-supply = <&vdd_5v0_sys>;
				vsup-sd5-supply = <&vdd_5v0_sys>;
				vin-ldo0-supply = <&vdd_1v35_lp0>;
				vin-ldo1-6-supply = <&vdd_3v3_run>;
				vin-ldo2-5-7-supply = <&vddio_1v8>;
				vin-ldo3-4-supply = <&vdd_3v3_sys>;
				vin-ldo9-10-supply = <&vdd_5v0_sys>;
				vin-ldo11-supply = <&vdd_3v3_run>;

				vdd_cpu: sd0 {
					regulator-name = "+VDD_CPU_AP";
					regulator-min-microvolt = <700000>;
					regulator-max-microvolt = <1350000>;
					regulator-min-microamp = <3500000>;
					regulator-max-microamp = <3500000>;
					regulator-always-on;
					regulator-boot-on;
					ams,ext-control = <2>;
				};

				sd1 {
					regulator-name = "+VDD_CORE";
					regulator-min-microvolt = <700000>;
					regulator-max-microvolt = <1350000>;
					regulator-min-microamp = <2500000>;
					regulator-max-microamp = <4000000>;
					regulator-always-on;
					regulator-boot-on;
					ams,ext-control = <1>;
				};

				vdd_1v35_lp0: sd2 {
					regulator-name = "+1.35V_LP0(sd2)";
					regulator-min-microvolt = <1350000>;
					regulator-max-microvolt = <1350000>;
					regulator-always-on;
					regulator-boot-on;
				};

				sd3 {
					regulator-name = "+1.35V_LP0(sd3)";
					regulator-min-microvolt = <1350000>;
					regulator-max-microvolt = <1350000>;
					regulator-always-on;
					regulator-boot-on;
				};

				vdd_1v05_run: sd4 {
					regulator-name = "+1.05V_RUN";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
				};

				vddio_1v8: sd5 {
					regulator-name = "+1.8V_VDDIO";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				vdd_gpu: sd6 {
					regulator-name = "+VDD_GPU_AP";
					regulator-min-microvolt = <650000>;
					regulator-max-microvolt = <1200000>;
					regulator-min-microamp = <3500000>;
					regulator-max-microamp = <3500000>;
					regulator-boot-on;
					regulator-always-on;
				};

				avdd_1v05_run: ldo0 {
					regulator-name = "+1.05V_RUN_AVDD";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
					regulator-boot-on;
					regulator-always-on;
					ams,ext-control = <1>;
				};

				ldo1 {
					regulator-name = "+1.8V_RUN_CAM";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo2 {
					regulator-name = "+1.2V_GEN_AVDD";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-boot-on;
					regulator-always-on;
				};

				ldo3 {
					regulator-name = "+1.00V_LP0_VDD_RTC";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-boot-on;
					regulator-always-on;
					ams,enable-tracking;
				};

				vdd_run_cam: ldo4 {
					regulator-name = "+3.3V_RUN_CAM";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo5 {
					regulator-name = "+1.2V_RUN_CAM_FRONT";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				vddio_sdmmc3: ldo6 {
					regulator-name = "+VDDIO_SDMMC3";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo7 {
					regulator-name = "+1.05V_RUN_CAM_REAR";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
				};

				ldo9 {
					regulator-name = "+2.8V_RUN_TOUCH";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo10 {
					regulator-name = "+2.8V_RUN_CAM_AF";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo11 {
					regulator-name = "+1.8V_RUN_VPP_FUSE";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};
			};
		};
	};

	spi@7000d400 {
		status = "okay";

		cros_ec: cros-ec@0 {
			compatible = "google,cros-ec-spi";
			spi-max-frequency = <3000000>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
			reg = <0>;

			google,cros-ec-spi-msg-delay = <2000>;

			i2c-tunnel {
				compatible = "google,cros-ec-i2c-tunnel";
				#address-cells = <1>;
				#size-cells = <0>;

				google,remote-bus = <0>;

				charger: bq24735@9 {
					compatible = "ti,bq24735";
					reg = <0x9>;
					interrupt-parent = <&gpio>;
					interrupts = <TEGRA_GPIO(J, 0)
							IRQ_TYPE_EDGE_BOTH>;
					ti,ac-detect-gpios = <&gpio
							TEGRA_GPIO(J, 0)
							GPIO_ACTIVE_HIGH>;
					ti,external-control;
				};

				battery: sbs-battery@b {
					compatible = "sbs,sbs-battery";
					reg = <0xb>;
					sbs,i2c-retry-count = <2>;
					sbs,poll-retry-count = <10>;
					power-supplies = <&charger>;
				};
			};
		};
	};

	spi@7000da00 {
		status = "okay";
		spi-max-frequency = <25000000>;

		flash@0 {
			compatible = "winbond,w25q32dw";
			spi-max-frequency = <25000000>;
			reg = <0>;
		};
	};

	pmc@7000e400 {
		nvidia,invert-interrupt;
		nvidia,suspend-mode = <0>;
		nvidia,cpu-pwr-good-time = <500>;
		nvidia,cpu-pwr-off-time = <300>;
		nvidia,core-pwr-good-time = <641 3845>;
		nvidia,core-pwr-off-time = <61036>;
		nvidia,core-power-req-active-high;
		nvidia,sys-clock-req-active-high;
	};

	hda@70030000 {
		status = "okay";
	};

	usb@70090000 {
		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";

		avddio-pex-supply = <&vdd_1v05_run>;
		dvddio-pex-supply = <&vdd_1v05_run>;
		avdd-usb-supply = <&vdd_3v3_lp0>;
		avdd-pll-utmip-supply = <&vddio_1v8>;
		avdd-pll-erefe-supply = <&avdd_1v05_run>;
		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;

		status = "okay";
	};

	padctl@7009f000 {
		status = "okay";

		pads {
			usb2 {
				status = "okay";

				lanes {
					usb2-0 {
						nvidia,function = "xusb";
						status = "okay";
					};

					usb2-1 {
						nvidia,function = "xusb";
						status = "okay";
					};

					usb2-2 {
						nvidia,function = "xusb";
						status = "okay";
					};
				};
			};

			pcie {
				status = "okay";

				lanes {
					pcie-0 {
						nvidia,function = "usb3-ss";
						status = "okay";
					};

					pcie-1 {
						nvidia,function = "usb3-ss";
						status = "okay";
					};
				};
			};
		};

		ports {
			usb2-0 {
				vbus-supply = <&vdd_usb1_vbus>;
				status = "okay";
				mode = "otg";
			};

			usb2-1 {
				vbus-supply = <&vdd_run_cam>;
				status = "okay";
				mode = "host";
			};

			usb2-2 {
				vbus-supply = <&vdd_usb3_vbus>;
				status = "okay";
				mode = "host";
			};

			usb3-0 {
				nvidia,usb2-companion = <0>;
				status = "okay";
			};

			usb3-1 {
				nvidia,usb2-companion = <1>;
				status = "okay";
			};
		};
	};

	sdhci0_pwrseq: sdhci0_pwrseq {
		compatible = "mmc-pwrseq-simple";

		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
	};

	sdhci@700b0000 { /* WiFi/BT on this bus */
		status = "okay";
		bus-width = <4>;
		no-1-8-v;
		non-removable;
		mmc-pwrseq = <&sdhci0_pwrseq>;
		vmmc-supply = <&vdd_3v3_lp0>;
		vqmmc-supply = <&vddio_1v8>;
		keep-power-in-suspend;
	};

	sdhci@700b0400 { /* SD Card on this bus */
		status = "okay";
		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
		bus-width = <4>;
		no-1-8-v;
		vqmmc-supply = <&vddio_sdmmc3>;
	};

	sdhci@700b0600 { /* eMMC on this bus */
		status = "okay";
		bus-width = <8>;
		no-1-8-v;
		non-removable;
	};

	/* CPU DFLL clock */
	clock@70110000 {
		status = "disabled";
		vdd-cpu-supply = <&vdd_cpu>;
		nvidia,i2c-fs-rate = <400000>;
	};

	ahub@70300000 {
		i2s@70301100 {
			status = "okay";
		};
	};

	backlight: backlight {
		compatible = "pwm-backlight";

		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
		power-supply = <&vdd_led>;
		pwms = <&pwm 1 1000000>;

		default-brightness-level = <224>;
		brightness-levels =
			<  0   1   2   3   4   5   6   7
			   8   9  10  11  12  13  14  15
			  16  17  18  19  20  21  22  23
			  24  25  26  27  28  29  30  31
			  32  33  34  35  36  37  38  39
			  40  41  42  43  44  45  46  47
			  48  49  50  51  52  53  54  55
			  56  57  58  59  60  61  62  63
			  64  65  66  67  68  69  70  71
			  72  73  74  75  76  77  78  79
			  80  81  82  83  84  85  86  87
			  88  89  90  91  92  93  94  95
			  96  97  98  99 100 101 102 103
			 104 105 106 107 108 109 110 111
			 112 113 114 115 116 117 118 119
			 120 121 122 123 124 125 126 127
			 128 129 130 131 132 133 134 135
			 136 137 138 139 140 141 142 143
			 144 145 146 147 148 149 150 151
			 152 153 154 155 156 157 158 159
			 160 161 162 163 164 165 166 167
			 168 169 170 171 172 173 174 175
			 176 177 178 179 180 181 182 183
			 184 185 186 187 188 189 190 191
			 192 193 194 195 196 197 198 199
			 200 201 202 203 204 205 206 207
			 208 209 210 211 212 213 214 215
			 216 217 218 219 220 221 222 223
			 224 225 226 227 228 229 230 231
			 232 233 234 235 236 237 238 239
			 240 241 242 243 244 245 246 247
			 248 249 250 251 252 253 254 255
			 256>;
	};

	clocks {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		clk32k_in: clock@0 {
			compatible = "fixed-clock";
			reg = <0>;
			#clock-cells = <0>;
			clock-frequency = <32768>;
		};
	};

	cpus {
		cpu@0 {
			vdd-cpu-supply = <&vdd_cpu>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		lid {
			label = "Lid";
			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
			linux,input-type = <5>;
			linux,code = <KEY_RESERVED>;
			debounce-interval = <1>;
			wakeup-source;
		};

		power {
			label = "Power";
			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			debounce-interval = <30>;
			wakeup-source;
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		vdd_mux: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "+VDD_MUX";
			regulator-min-microvolt = <12000000>;
			regulator-max-microvolt = <12000000>;
			regulator-always-on;
			regulator-boot-on;
		};

		vdd_5v0_sys: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "+5V_SYS";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-always-on;
			regulator-boot-on;
			vin-supply = <&vdd_mux>;
		};

		vdd_3v3_sys: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "+3.3V_SYS";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
			regulator-boot-on;
			vin-supply = <&vdd_mux>;
		};

		vdd_3v3_run: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "+3.3V_RUN";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_3v3_sys>;
		};

		vdd_3v3_hdmi: regulator@4 {
			compatible = "regulator-fixed";
			reg = <4>;
			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			vin-supply = <&vdd_3v3_run>;
		};

		vdd_led: regulator@5 {
			compatible = "regulator-fixed";
			reg = <5>;
			regulator-name = "+VDD_LED";
			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_mux>;
		};

		vdd_5v0_ts: regulator@6 {
			compatible = "regulator-fixed";
			reg = <6>;
			regulator-name = "+5V_VDD_TS_SW";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-boot-on;
			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_5v0_sys>;
		};

		vdd_usb1_vbus: regulator@7 {
			compatible = "regulator-fixed";
			reg = <7>;
			regulator-name = "+5V_USB_HS";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			gpio-open-drain;
			vin-supply = <&vdd_5v0_sys>;
		};

		vdd_usb3_vbus: regulator@8 {
			compatible = "regulator-fixed";
			reg = <8>;
			regulator-name = "+5V_USB_SS";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			gpio-open-drain;
			vin-supply = <&vdd_5v0_sys>;
		};

		vdd_3v3_panel: regulator@9 {
			compatible = "regulator-fixed";
			reg = <9>;
			regulator-name = "+3.3V_PANEL";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_3v3_run>;
		};

		vdd_3v3_lp0: regulator@10 {
			compatible = "regulator-fixed";
			reg = <10>;
			regulator-name = "+3.3V_LP0";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			/*
			 * TODO: find a way to wire this up with the USB EHCI
			 * controllers so that it can be enabled on demand.
			 */
			regulator-always-on;
			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_3v3_sys>;
		};

		vdd_hdmi_pll: regulator@11 {
			compatible = "regulator-fixed";
			reg = <11>;
			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
			regulator-min-microvolt = <1050000>;
			regulator-max-microvolt = <1050000>;
			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
			vin-supply = <&vdd_1v05_run>;
		};

		vdd_5v0_hdmi: regulator@12 {
			compatible = "regulator-fixed";
			reg = <12>;
			regulator-name = "+5V_HDMI_CON";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_5v0_sys>;
		};
	};

	sound {
		nvidia,audio-routing =
			"Headphones", "HPR",
			"Headphones", "HPL",
			"Speakers", "SPKR",
			"Speakers", "SPKL",
			"Mic Jack", "MICBIAS",
			"DMICL", "Int Mic",
			"DMICR", "Int Mic",
			"IN34", "Mic Jack";

		nvidia,i2s-controller = <&tegra_i2s1>;
		nvidia,audio-codec = <&acodec>;

		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
			 <&tegra_car TEGRA124_CLK_EXTERN1>;
		clock-names = "pll_a", "pll_a_out0", "mclk";

		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
		nvidia,mic-det-gpios =
				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
	};

	gpio-restart {
		compatible = "gpio-restart";
		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
		priority = <200>;
	};
};

#include "cros-ec-keyboard.dtsi"
Commit	Line	Data
53d02858 TV	1	#include <dt-bindings/input/input.h>
	2	#include "tegra124.dtsi"
	3
	4	/ {
	5	aliases {
b5896f67 MZ	6	rtc0 = "/i2c@7000d000/pmic@40";
b5896f67 MZ	7	rtc1 = "/rtc@7000e000";
53d02858 TV	8	serial0 = &uarta;
	9	};
	10
f5bbb327 JH	11	chosen {
	12	stdout-path = "serial0:115200n8";
	13	};
	14
53d02858 TV	15	memory {
	16	reg = <0x0 0x80000000 0x0 0x80000000>;
	17	};
	18
b5896f67 MZ	19	host1x@50000000 {
b5896f67 MZ	20	hdmi@54280000 {
53d02858 TV	21	status = "okay";
	22
	23	vdd-supply = <&vdd_3v3_hdmi>;
	24	pll-supply = <&vdd_hdmi_pll>;
	25	hdmi-supply = <&vdd_5v0_hdmi>;
	26
	27	nvidia,ddc-i2c-bus = <&hdmi_ddc>;
	28	nvidia,hpd-gpio =
	29	<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
	30	};
	31
b5896f67	32	sor@54540000 {
53d02858 TV	33	status = "okay";
	34
	35	nvidia,dpaux = <&dpaux>;
	36	nvidia,panel = <&panel>;
	37	};
	38
b5896f67	39	dpaux@545c0000 {
53d02858 TV	40	vdd-supply = <&vdd_3v3_panel>;
	41	status = "okay";
	42	};
	43	};
	44
5d831dd5 PK	45	gpu@0,57000000 {
	46	status = "okay";
	47
	48	vdd-supply = <&vdd_gpu>;
	49	};
	50
b5896f67	51	serial@70006000 {
53d02858 TV	52	/* Debug connector on the bottom of the board near SD card. */
	53	status = "okay";
	54	};
	55
b5896f67	56	pwm@7000a000 {
53d02858 TV	57	status = "okay";
	58	};
	59
b5896f67	60	i2c@7000c000 {
53d02858 TV	61	status = "okay";
	62	clock-frequency = <100000>;
	63
	64	acodec: audio-codec@10 {
	65	compatible = "maxim,max98090";
	66	reg = <0x10>;
	67	interrupt-parent = <&gpio>;
38333641	68	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
53d02858 TV	69	};
	70
	71	temperature-sensor@4c {
	72	compatible = "ti,tmp451";
	73	reg = <0x4c>;
	74	interrupt-parent = <&gpio>;
	75	interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
	76
	77	#thermal-sensor-cells = <1>;
	78	};
	79	};
	80
b5896f67	81	i2c@7000c400 {
53d02858 TV	82	status = "okay";
53d02858 TV	83	clock-frequency = <100000>;
a0b9c1cb TV	84
	85	trackpad@15 {
	86	compatible = "elan,ekth3000";
	87	reg = <0x15>;
	88	interrupt-parent = <&gpio>;
	89	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
	90	wakeup-source;
	91	};
53d02858 TV	92	};
53d02858 TV	93
b5896f67	94	i2c@7000c500 {
53d02858 TV	95	status = "okay";
	96	clock-frequency = <400000>;
	97
	98	tpm@20 {
	99	compatible = "infineon,slb9645tt";
	100	reg = <0x20>;
	101	};
	102	};
	103
b5896f67	104	hdmi_ddc: i2c@7000c700 {
53d02858 TV	105	status = "okay";
	106	clock-frequency = <100000>;
	107	};
	108
b5896f67	109	i2c@7000d000 {
53d02858 TV	110	status = "okay";
	111	clock-frequency = <400000>;
	112
	113	pmic: pmic@40 {
	114	compatible = "ams,as3722";
	115	reg = <0x40>;
	116	interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
	117
	118	ams,system-power-controller;
	119
	120	#interrupt-cells = <2>;
	121	interrupt-controller;
	122
	123	gpio-controller;
	124	#gpio-cells = <2>;
	125
	126	pinctrl-names = "default";
	127	pinctrl-0 = <&as3722_default>;
	128
	129	as3722_default: pinmux {
	130	gpio0 {
	131	pins = "gpio0";
	132	function = "gpio";
	133	bias-pull-down;
	134	};
	135
	136	gpio1 {
	137	pins = "gpio1";
	138	function = "gpio";
	139	bias-pull-up;
	140	};
	141
	142	gpio2_4_7 {
	143	pins = "gpio2", "gpio4", "gpio7";
	144	function = "gpio";
	145	bias-pull-up;
	146	};
	147
	148	gpio3_6 {
	149	pins = "gpio3", "gpio6";
	150	bias-high-impedance;
	151	};
	152
	153	gpio5 {
	154	pins = "gpio5";
	155	function = "clk32k-out";
	156	bias-pull-down;
	157	};
	158	};
	159
	160	regulators {
	161	vsup-sd2-supply = <&vdd_5v0_sys>;
	162	vsup-sd3-supply = <&vdd_5v0_sys>;
	163	vsup-sd4-supply = <&vdd_5v0_sys>;
	164	vsup-sd5-supply = <&vdd_5v0_sys>;
	165	vin-ldo0-supply = <&vdd_1v35_lp0>;
	166	vin-ldo1-6-supply = <&vdd_3v3_run>;
	167	vin-ldo2-5-7-supply = <&vddio_1v8>;
	168	vin-ldo3-4-supply = <&vdd_3v3_sys>;
	169	vin-ldo9-10-supply = <&vdd_5v0_sys>;
	170	vin-ldo11-supply = <&vdd_3v3_run>;
	171
9a0baee9	172	vdd_cpu: sd0 {
53d02858 TV	173	regulator-name = "+VDD_CPU_AP";
	174	regulator-min-microvolt = <700000>;
	175	regulator-max-microvolt = <1350000>;
	176	regulator-min-microamp = <3500000>;
	177	regulator-max-microamp = <3500000>;
	178	regulator-always-on;
	179	regulator-boot-on;
	180	ams,ext-control = <2>;
	181	};
	182
	183	sd1 {
	184	regulator-name = "+VDD_CORE";
	185	regulator-min-microvolt = <700000>;
	186	regulator-max-microvolt = <1350000>;
	187	regulator-min-microamp = <2500000>;
	188	regulator-max-microamp = <4000000>;
	189	regulator-always-on;
	190	regulator-boot-on;
	191	ams,ext-control = <1>;
	192	};
	193
	194	vdd_1v35_lp0: sd2 {
	195	regulator-name = "+1.35V_LP0(sd2)";
	196	regulator-min-microvolt = <1350000>;
	197	regulator-max-microvolt = <1350000>;
	198	regulator-always-on;
	199	regulator-boot-on;
	200	};
	201
	202	sd3 {
	203	regulator-name = "+1.35V_LP0(sd3)";
	204	regulator-min-microvolt = <1350000>;
	205	regulator-max-microvolt = <1350000>;
	206	regulator-always-on;
	207	regulator-boot-on;
	208	};
	209
	210	vdd_1v05_run: sd4 {
	211	regulator-name = "+1.05V_RUN";
	212	regulator-min-microvolt = <1050000>;
	213	regulator-max-microvolt = <1050000>;
	214	};
	215
	216	vddio_1v8: sd5 {
	217	regulator-name = "+1.8V_VDDIO";
	218	regulator-min-microvolt = <1800000>;
	219	regulator-max-microvolt = <1800000>;
53d02858 TV	220	regulator-always-on;
	221	};
	222
5d831dd5	223	vdd_gpu: sd6 {
53d02858 TV	224	regulator-name = "+VDD_GPU_AP";
	225	regulator-min-microvolt = <650000>;
	226	regulator-max-microvolt = <1200000>;
	227	regulator-min-microamp = <3500000>;
	228	regulator-max-microamp = <3500000>;
	229	regulator-boot-on;
	230	regulator-always-on;
	231	};
	232
1333ce4d	233	avdd_1v05_run: ldo0 {
53d02858 TV	234	regulator-name = "+1.05V_RUN_AVDD";
	235	regulator-min-microvolt = <1050000>;
	236	regulator-max-microvolt = <1050000>;
	237	regulator-boot-on;
	238	regulator-always-on;
	239	ams,ext-control = <1>;
	240	};
	241
	242	ldo1 {
	243	regulator-name = "+1.8V_RUN_CAM";
	244	regulator-min-microvolt = <1800000>;
	245	regulator-max-microvolt = <1800000>;
	246	};
	247
	248	ldo2 {
	249	regulator-name = "+1.2V_GEN_AVDD";
	250	regulator-min-microvolt = <1200000>;
	251	regulator-max-microvolt = <1200000>;
	252	regulator-boot-on;
	253	regulator-always-on;
	254	};
	255
	256	ldo3 {
	257	regulator-name = "+1.00V_LP0_VDD_RTC";
	258	regulator-min-microvolt = <1000000>;
	259	regulator-max-microvolt = <1000000>;
	260	regulator-boot-on;
	261	regulator-always-on;
	262	ams,enable-tracking;
	263	};
	264
	265	vdd_run_cam: ldo4 {
	266	regulator-name = "+3.3V_RUN_CAM";
	267	regulator-min-microvolt = <2800000>;
	268	regulator-max-microvolt = <2800000>;
	269	};
	270
	271	ldo5 {
	272	regulator-name = "+1.2V_RUN_CAM_FRONT";
	273	regulator-min-microvolt = <1200000>;
	274	regulator-max-microvolt = <1200000>;
	275	};
	276
	277	vddio_sdmmc3: ldo6 {
	278	regulator-name = "+VDDIO_SDMMC3";
	279	regulator-min-microvolt = <1800000>;
	280	regulator-max-microvolt = <3300000>;
	281	};
	282
	283	ldo7 {
	284	regulator-name = "+1.05V_RUN_CAM_REAR";
	285	regulator-min-microvolt = <1050000>;
	286	regulator-max-microvolt = <1050000>;
	287	};
	288
	289	ldo9 {
	290	regulator-name = "+2.8V_RUN_TOUCH";
	291	regulator-min-microvolt = <2800000>;
	292	regulator-max-microvolt = <2800000>;
	293	};
	294
	295	ldo10 {
	296	regulator-name = "+2.8V_RUN_CAM_AF";
	297	regulator-min-microvolt = <2800000>;
298	regulator-max-microvolt = <2800000>;
299	};
300
301	ldo11 {
302	regulator-name = "+1.8V_RUN_VPP_FUSE";
303	regulator-min-microvolt = <1800000>;
304	regulator-max-microvolt = <1800000>;
305	};
306	};
307	};
308	};
309
b5896f67	310	spi@7000d400 {
53d02858 TV	311	status = "okay";
	312
	313	cros_ec: cros-ec@0 {
	314	compatible = "google,cros-ec-spi";
	315	spi-max-frequency = <3000000>;
	316	interrupt-parent = <&gpio>;
	317	interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
	318	reg = <0>;
	319
	320	google,cros-ec-spi-msg-delay = <2000>;
	321
	322	i2c-tunnel {
	323	compatible = "google,cros-ec-i2c-tunnel";
	324	#address-cells = <1>;
	325	#size-cells = <0>;
	326
	327	google,remote-bus = <0>;
	328
	329	charger: bq24735@9 {
	330	compatible = "ti,bq24735";
	331	reg = <0x9>;
	332	interrupt-parent = <&gpio>;
	333	interrupts = <TEGRA_GPIO(J, 0)
38333641	334	IRQ_TYPE_EDGE_BOTH>;
53d02858 TV	335	ti,ac-detect-gpios = <&gpio
	336	TEGRA_GPIO(J, 0)
	337	GPIO_ACTIVE_HIGH>;
5fc01a99	338	ti,external-control;
53d02858 TV	339	};
	340
	341	battery: sbs-battery@b {
	342	compatible = "sbs,sbs-battery";
	343	reg = <0xb>;
	344	sbs,i2c-retry-count = <2>;
	345	sbs,poll-retry-count = <10>;
	346	power-supplies = <&charger>;
	347	};
	348	};
	349	};
	350	};
	351
b5896f67	352	spi@7000da00 {
53d02858 TV	353	status = "okay";
	354	spi-max-frequency = <25000000>;
	355
	356	flash@0 {
	357	compatible = "winbond,w25q32dw";
97e147e8	358	spi-max-frequency = <25000000>;
53d02858 TV	359	reg = <0>;
	360	};
	361	};
	362
b5896f67	363	pmc@7000e400 {
53d02858 TV	364	nvidia,invert-interrupt;
	365	nvidia,suspend-mode = <0>;
	366	nvidia,cpu-pwr-good-time = <500>;
	367	nvidia,cpu-pwr-off-time = <300>;
	368	nvidia,core-pwr-good-time = <641 3845>;
	369	nvidia,core-pwr-off-time = <61036>;
	370	nvidia,core-power-req-active-high;
	371	nvidia,sys-clock-req-active-high;
	372	};
	373
b5896f67	374	hda@70030000 {
53d02858 TV	375	status = "okay";
	376	};
	377
b5896f67 MZ	378	usb@70090000 {
	379	phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
	380	<&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
	381	<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
	382	<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
	383	<&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
1333ce4d TR	384	phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
	385
	386	avddio-pex-supply = <&vdd_1v05_run>;
	387	dvddio-pex-supply = <&vdd_1v05_run>;
	388	avdd-usb-supply = <&vdd_3v3_lp0>;
	389	avdd-pll-utmip-supply = <&vddio_1v8>;
	390	avdd-pll-erefe-supply = <&avdd_1v05_run>;
	391	avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
	392	hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
	393	hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
	394
	395	status = "okay";
	396	};
	397
b5896f67	398	padctl@7009f000 {
1333ce4d TR	399	status = "okay";
	400
	401	pads {
	402	usb2 {
	403	status = "okay";
	404
	405	lanes {
	406	usb2-0 {
	407	nvidia,function = "xusb";
	408	status = "okay";
	409	};
	410
	411	usb2-1 {
	412	nvidia,function = "xusb";
	413	status = "okay";
	414	};
	415
	416	usb2-2 {
	417	nvidia,function = "xusb";
	418	status = "okay";
	419	};
	420	};
	421	};
	422
	423	pcie {
	424	status = "okay";
	425
	426	lanes {
	427	pcie-0 {
	428	nvidia,function = "usb3-ss";
	429	status = "okay";
	430	};
	431
	432	pcie-1 {
	433	nvidia,function = "usb3-ss";
	434	status = "okay";
	435	};
	436	};
	437	};
	438	};
	439
	440	ports {
	441	usb2-0 {
	442	vbus-supply = <&vdd_usb1_vbus>;
	443	status = "okay";
	444	mode = "otg";
	445	};
	446
	447	usb2-1 {
	448	vbus-supply = <&vdd_run_cam>;
	449	status = "okay";
	450	mode = "host";
	451	};
	452
	453	usb2-2 {
	454	vbus-supply = <&vdd_usb3_vbus>;
	455	status = "okay";
	456	mode = "host";
	457	};
	458
	459	usb3-0 {
	460	nvidia,usb2-companion = <0>;
	461	status = "okay";
	462	};
463
464	usb3-1 {
465	nvidia,usb2-companion = <1>;
466	status = "okay";
467	};
468	};
469	};
470
1d1690b8 TV	471	sdhci0_pwrseq: sdhci0_pwrseq {
	472	compatible = "mmc-pwrseq-simple";
	473
	474	reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
	475	};
	476
b5896f67	477	sdhci@700b0000 { /* WiFi/BT on this bus */
53d02858	478	status = "okay";
53d02858 TV	479	bus-width = <4>;
	480	no-1-8-v;
	481	non-removable;
1d1690b8 TV	482	mmc-pwrseq = <&sdhci0_pwrseq>;
	483	vmmc-supply = <&vdd_3v3_lp0>;
	484	vqmmc-supply = <&vddio_1v8>;
160b2dd7	485	keep-power-in-suspend;
53d02858 TV	486	};
53d02858 TV	487
b5896f67	488	sdhci@700b0400 { /* SD Card on this bus */
53d02858 TV	489	status = "okay";
	490	cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
	491	power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
	492	bus-width = <4>;
	493	no-1-8-v;
	494	vqmmc-supply = <&vddio_sdmmc3>;
	495	};
	496
b5896f67	497	sdhci@700b0600 { /* eMMC on this bus */
53d02858 TV	498	status = "okay";
	499	bus-width = <8>;
	500	no-1-8-v;
	501	non-removable;
	502	};
	503
9a0baee9	504	/* CPU DFLL clock */
b5896f67	505	clock@70110000 {
80373d37	506	status = "disabled";
9a0baee9 JH	507	vdd-cpu-supply = <&vdd_cpu>;
	508	nvidia,i2c-fs-rate = <400000>;
	509	};
	510
b5896f67 MZ	511	ahub@70300000 {
b5896f67 MZ	512	i2s@70301100 {
53d02858 TV	513	status = "okay";
	514	};
	515	};
	516
53d02858 TV	517	backlight: backlight {
	518	compatible = "pwm-backlight";
	519
	520	enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
	521	power-supply = <&vdd_led>;
	522	pwms = <&pwm 1 1000000>;
	523
	524	default-brightness-level = <224>;
	525	brightness-levels =
	526	< 0 1 2 3 4 5 6 7
	527	8 9 10 11 12 13 14 15
	528	16 17 18 19 20 21 22 23
	529	24 25 26 27 28 29 30 31
	530	32 33 34 35 36 37 38 39
	531	40 41 42 43 44 45 46 47
	532	48 49 50 51 52 53 54 55
	533	56 57 58 59 60 61 62 63
	534	64 65 66 67 68 69 70 71
	535	72 73 74 75 76 77 78 79
	536	80 81 82 83 84 85 86 87
	537	88 89 90 91 92 93 94 95
	538	96 97 98 99 100 101 102 103
	539	104 105 106 107 108 109 110 111
	540	112 113 114 115 116 117 118 119
	541	120 121 122 123 124 125 126 127
	542	128 129 130 131 132 133 134 135
	543	136 137 138 139 140 141 142 143
	544	144 145 146 147 148 149 150 151
	545	152 153 154 155 156 157 158 159
	546	160 161 162 163 164 165 166 167
	547	168 169 170 171 172 173 174 175
	548	176 177 178 179 180 181 182 183
	549	184 185 186 187 188 189 190 191
	550	192 193 194 195 196 197 198 199
	551	200 201 202 203 204 205 206 207
	552	208 209 210 211 212 213 214 215
	553	216 217 218 219 220 221 222 223
	554	224 225 226 227 228 229 230 231
	555	232 233 234 235 236 237 238 239
	556	240 241 242 243 244 245 246 247
	557	248 249 250 251 252 253 254 255
	558	256>;
	559	};
	560
	561	clocks {
	562	compatible = "simple-bus";
	563	#address-cells = <1>;
	564	#size-cells = <0>;
	565
	566	clk32k_in: clock@0 {
	567	compatible = "fixed-clock";
	568	reg = <0>;
	569	#clock-cells = <0>;
	570	clock-frequency = <32768>;
	571	};
	572	};
	573
9a0baee9 JH	574	cpus {
	575	cpu@0 {
	576	vdd-cpu-supply = <&vdd_cpu>;
	577	};
	578	};
	579
53d02858 TV	580	gpio-keys {
	581	compatible = "gpio-keys";
	582
	583	lid {
	584	label = "Lid";
	585	gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
	586	linux,input-type = <5>;
	587	linux,code = <KEY_RESERVED>;
	588	debounce-interval = <1>;
d1c04d30	589	wakeup-source;
53d02858 TV	590	};
	591
	592	power {
	593	label = "Power";
	594	gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
	595	linux,code = <KEY_POWER>;
	596	debounce-interval = <30>;
d1c04d30	597	wakeup-source;
53d02858 TV	598	};
	599	};
	600
	601	regulators {
	602	compatible = "simple-bus";
	603	#address-cells = <1>;
	604	#size-cells = <0>;
	605
	606	vdd_mux: regulator@0 {
	607	compatible = "regulator-fixed";
	608	reg = <0>;
	609	regulator-name = "+VDD_MUX";
	610	regulator-min-microvolt = <12000000>;
	611	regulator-max-microvolt = <12000000>;
	612	regulator-always-on;
	613	regulator-boot-on;
	614	};
	615
	616	vdd_5v0_sys: regulator@1 {
	617	compatible = "regulator-fixed";
	618	reg = <1>;
	619	regulator-name = "+5V_SYS";
	620	regulator-min-microvolt = <5000000>;
	621	regulator-max-microvolt = <5000000>;
	622	regulator-always-on;
	623	regulator-boot-on;
	624	vin-supply = <&vdd_mux>;
	625	};
	626
	627	vdd_3v3_sys: regulator@2 {
	628	compatible = "regulator-fixed";
	629	reg = <2>;
	630	regulator-name = "+3.3V_SYS";
	631	regulator-min-microvolt = <3300000>;
	632	regulator-max-microvolt = <3300000>;
	633	regulator-always-on;
	634	regulator-boot-on;
	635	vin-supply = <&vdd_mux>;
	636	};
	637
	638	vdd_3v3_run: regulator@3 {
	639	compatible = "regulator-fixed";
	640	reg = <3>;
	641	regulator-name = "+3.3V_RUN";
	642	regulator-min-microvolt = <3300000>;
	643	regulator-max-microvolt = <3300000>;
	644	regulator-always-on;
	645	regulator-boot-on;
	646	gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
	647	enable-active-high;
	648	vin-supply = <&vdd_3v3_sys>;
	649	};
	650
	651	vdd_3v3_hdmi: regulator@4 {
	652	compatible = "regulator-fixed";
	653	reg = <4>;
	654	regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
	655	regulator-min-microvolt = <3300000>;
	656	regulator-max-microvolt = <3300000>;
	657	vin-supply = <&vdd_3v3_run>;
	658	};
	659
	660	vdd_led: regulator@5 {
	661	compatible = "regulator-fixed";
662	reg = <5>;
663	regulator-name = "+VDD_LED";
664	gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
665	enable-active-high;
666	vin-supply = <&vdd_mux>;
667	};
668
669	vdd_5v0_ts: regulator@6 {
670	compatible = "regulator-fixed";
671	reg = <6>;
672	regulator-name = "+5V_VDD_TS_SW";
673	regulator-min-microvolt = <5000000>;
674	regulator-max-microvolt = <5000000>;
675	regulator-boot-on;
676	gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
677	enable-active-high;
678	vin-supply = <&vdd_5v0_sys>;
679	};
680
681	vdd_usb1_vbus: regulator@7 {
682	compatible = "regulator-fixed";
683	reg = <7>;
684	regulator-name = "+5V_USB_HS";
685	regulator-min-microvolt = <5000000>;
686	regulator-max-microvolt = <5000000>;
687	gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
688	enable-active-high;
689	gpio-open-drain;
690	vin-supply = <&vdd_5v0_sys>;
691	};
692
693	vdd_usb3_vbus: regulator@8 {
694	compatible = "regulator-fixed";
695	reg = <8>;
696	regulator-name = "+5V_USB_SS";
697	regulator-min-microvolt = <5000000>;
698	regulator-max-microvolt = <5000000>;
699	gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
700	enable-active-high;
701	gpio-open-drain;
702	vin-supply = <&vdd_5v0_sys>;
703	};
704
705	vdd_3v3_panel: regulator@9 {
706	compatible = "regulator-fixed";
707	reg = <9>;
708	regulator-name = "+3.3V_PANEL";
709	regulator-min-microvolt = <3300000>;
710	regulator-max-microvolt = <3300000>;
711	gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
712	enable-active-high;
713	vin-supply = <&vdd_3v3_run>;
714	};
715
716	vdd_3v3_lp0: regulator@10 {
717	compatible = "regulator-fixed";
718	reg = <10>;
719	regulator-name = "+3.3V_LP0";
720	regulator-min-microvolt = <3300000>;
721	regulator-max-microvolt = <3300000>;
722	/*
723	* TODO: find a way to wire this up with the USB EHCI
724	* controllers so that it can be enabled on demand.
725	*/
726	regulator-always-on;
727	gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
728	enable-active-high;
729	vin-supply = <&vdd_3v3_sys>;
730	};
731
732	vdd_hdmi_pll: regulator@11 {
733	compatible = "regulator-fixed";
734	reg = <11>;
735	regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
736	regulator-min-microvolt = <1050000>;
737	regulator-max-microvolt = <1050000>;
738	gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
739	vin-supply = <&vdd_1v05_run>;
740	};
741
742	vdd_5v0_hdmi: regulator@12 {
743	compatible = "regulator-fixed";
744	reg = <12>;
745	regulator-name = "+5V_HDMI_CON";
746	regulator-min-microvolt = <5000000>;
747	regulator-max-microvolt = <5000000>;
748	gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
749	enable-active-high;
750	vin-supply = <&vdd_5v0_sys>;
751	};
752	};
753
754	sound {
755	nvidia,audio-routing =
756	"Headphones", "HPR",
757	"Headphones", "HPL",
758	"Speakers", "SPKR",
759	"Speakers", "SPKL",
760	"Mic Jack", "MICBIAS",
761	"DMICL", "Int Mic",
762	"DMICR", "Int Mic",
763	"IN34", "Mic Jack";
764
765	nvidia,i2s-controller = <&tegra_i2s1>;
766	nvidia,audio-codec = <&acodec>;
767
768	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
769	<&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
770	<&tegra_car TEGRA124_CLK_EXTERN1>;
771	clock-names = "pll_a", "pll_a_out0", "mclk";
772
773	nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
774	nvidia,mic-det-gpios =
775	<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
776	};
1755de86 TV	777
	778	gpio-restart {
	779	compatible = "gpio-restart";
	780	gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
	781	priority = <200>;
	782	};
53d02858 TV	783	};
	784
	785	#include "cros-ec-keyboard.dtsi"