[mirror_ubuntu-zesty-kernel.git] / arch / arm / mach-at91 / board-sam9260ek.c

/*
 * linux/arch/arm/mach-at91/board-sam9260ek.c
 *
 *  Copyright (C) 2005 SAN People
 *  Copyright (C) 2006 Atmel
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
#include <linux/clk.h>
#include <linux/i2c/at24.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>

#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>

#include "sam9_smc.h"
#include "generic.h"


static void __init ek_init_early(void)
{
	/* Initialize processor: 18.432 MHz crystal */
	at91_initialize(18432000);
}

/*
 * USB Host port
 */
static struct at91_usbh_data __initdata ek_usbh_data = {
	.ports		= 2,
	.vbus_pin	= {-EINVAL, -EINVAL},
	.overcurrent_pin= {-EINVAL, -EINVAL},
};

/*
 * USB Device port
 */
static struct at91_udc_data __initdata ek_udc_data = {
	.vbus_pin	= AT91_PIN_PC5,
	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
};


/*
 * Audio
 */
static struct at73c213_board_info at73c213_data = {
	.ssc_id		= 0,
	.shortname	= "AT91SAM9260-EK external DAC",
};

#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
static void __init at73c213_set_clk(struct at73c213_board_info *info)
{
	struct clk *pck0;
	struct clk *plla;

	pck0 = clk_get(NULL, "pck0");
	plla = clk_get(NULL, "plla");

	/* AT73C213 MCK Clock */
	at91_set_B_periph(AT91_PIN_PC1, 0);	/* PCK0 */

	clk_set_parent(pck0, plla);
	clk_put(plla);

	info->dac_clk = pck0;
}
#else
static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
#endif

/*
 * SPI devices.
 */
static struct spi_board_info ek_spi_devices[] = {
#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
	{	/* DataFlash chip */
		.modalias	= "mtd_dataflash",
		.chip_select	= 1,
		.max_speed_hz	= 15 * 1000 * 1000,
		.bus_num	= 0,
	},
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
	{	/* DataFlash card */
		.modalias	= "mtd_dataflash",
		.chip_select	= 0,
		.max_speed_hz	= 15 * 1000 * 1000,
		.bus_num	= 0,
	},
#endif
#endif
#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
	{	/* AT73C213 DAC */
		.modalias	= "at73c213",
		.chip_select	= 0,
		.max_speed_hz	= 10 * 1000 * 1000,
		.bus_num	= 1,
		.mode		= SPI_MODE_1,
		.platform_data	= &at73c213_data,
	},
#endif
};


/*
 * MACB Ethernet device
 */
static struct macb_platform_data __initdata ek_macb_data = {
	.phy_irq_pin	= AT91_PIN_PA7,
	.is_rmii	= 1,
};


/*
 * NAND flash
 */
static struct mtd_partition __initdata ek_nand_partition[] = {
	{
		.name	= "Partition 1",
		.offset	= 0,
		.size	= SZ_256K,
	},
	{
		.name	= "Partition 2",
		.offset	= MTDPART_OFS_NXTBLK,
		.size	= MTDPART_SIZ_FULL,
	},
};

static struct atmel_nand_data __initdata ek_nand_data = {
	.ale		= 21,
	.cle		= 22,
	.det_pin	= -EINVAL,
	.rdy_pin	= AT91_PIN_PC13,
	.enable_pin	= AT91_PIN_PC14,
	.ecc_mode	= NAND_ECC_SOFT,
	.on_flash_bbt	= 1,
	.parts		= ek_nand_partition,
	.num_parts	= ARRAY_SIZE(ek_nand_partition),
};

static struct sam9_smc_config __initdata ek_nand_smc_config = {
	.ncs_read_setup		= 0,
	.nrd_setup		= 1,
	.ncs_write_setup	= 0,
	.nwe_setup		= 1,

	.ncs_read_pulse		= 3,
	.nrd_pulse		= 3,
	.ncs_write_pulse	= 3,
	.nwe_pulse		= 3,

	.read_cycle		= 5,
	.write_cycle		= 5,

	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
	.tdf_cycles		= 2,
};

static void __init ek_add_device_nand(void)
{
	ek_nand_data.bus_width_16 = board_have_nand_16bit();
	/* setup bus-width (8 or 16) */
	if (ek_nand_data.bus_width_16)
		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
	else
		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;

	/* configure chip-select 3 (NAND) */
	sam9_smc_configure(0, 3, &ek_nand_smc_config);

	at91_add_device_nand(&ek_nand_data);
}


/*
 * MCI (SD/MMC)
 */
static struct mci_platform_data __initdata ek_mci0_data = {
	.slot[1] = {
		.bus_width	= 4,
		.detect_pin	= -EINVAL,
		.wp_pin		= -EINVAL,
	},
};


/*
 * LEDs
 */
static struct gpio_led ek_leds[] = {
	{	/* "bottom" led, green, userled1 to be defined */
		.name			= "ds5",
		.gpio			= AT91_PIN_PA6,
		.active_low		= 1,
		.default_trigger	= "none",
	},
	{	/* "power" led, yellow */
		.name			= "ds1",
		.gpio			= AT91_PIN_PA9,
		.default_trigger	= "heartbeat",
	}
};

/*
 * I2C devices
 */
static struct at24_platform_data at24c512 = {
	.byte_len	= SZ_512K / 8,
	.page_size	= 128,
	.flags		= AT24_FLAG_ADDR16,
};

static struct i2c_board_info __initdata ek_i2c_devices[] = {
	{
		I2C_BOARD_INFO("24c512", 0x50),
		.platform_data = &at24c512,
	},
	/* more devices can be added using expansion connectors */
};


/*
 * GPIO Buttons
 */
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
	{
		.gpio		= AT91_PIN_PA30,
		.code		= BTN_3,
		.desc		= "Button 3",
		.active_low	= 1,
		.wakeup		= 1,
	},
	{
		.gpio		= AT91_PIN_PA31,
		.code		= BTN_4,
		.desc		= "Button 4",
		.active_low	= 1,
		.wakeup		= 1,
	}
};

static struct gpio_keys_platform_data ek_button_data = {
	.buttons	= ek_buttons,
	.nbuttons	= ARRAY_SIZE(ek_buttons),
};

static struct platform_device ek_button_device = {
	.name		= "gpio-keys",
	.id		= -1,
	.num_resources	= 0,
	.dev		= {
		.platform_data	= &ek_button_data,
	}
};

static void __init ek_add_device_buttons(void)
{
	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
	at91_set_deglitch(AT91_PIN_PA30, 1);
	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
	at91_set_deglitch(AT91_PIN_PA31, 1);

	platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif


static void __init ek_board_init(void)
{
	/* Serial */
	/* DBGU on ttyS0. (Rx & Tx only) */
	at91_register_uart(0, 0, 0);

	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
			   | ATMEL_UART_RI);

	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
	at91_add_device_serial();
	/* USB Host */
	at91_add_device_usbh(&ek_usbh_data);
	/* USB Device */
	at91_add_device_udc(&ek_udc_data);
	/* SPI */
	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	/* NAND */
	ek_add_device_nand();
	/* Ethernet */
	at91_add_device_eth(&ek_macb_data);
	/* MMC */
	at91_add_device_mci(0, &ek_mci0_data);
	/* I2C */
	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
	/* SSC (to AT73C213) */
	at73c213_set_clk(&at73c213_data);
	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
	/* LEDs */
	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	/* Push Buttons */
	ek_add_device_buttons();
}

MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
	/* Maintainer: Atmel */
	.timer		= &at91sam926x_timer,
	.map_io		= at91_map_io,
	.handle_irq	= at91_aic_handle_irq,
	.init_early	= ek_init_early,
	.init_irq	= at91_init_irq_default,
	.init_machine	= ek_board_init,
MACHINE_END
Commit	Line	Data
b85a8914	1	/*
d0760b3b	2	* linux/arch/arm/mach-at91/board-sam9260ek.c
b85a8914 AV	3	*
	4	* Copyright (C) 2005 SAN People
	5	* Copyright (C) 2006 Atmel
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License as published by
	9	* the Free Software Foundation; either version 2 of the License, or
	10	* (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	20	*/
	21
	22	#include <linux/types.h>
2f8163ba	23	#include <linux/gpio.h>
b85a8914 AV	24	#include <linux/init.h>
	25	#include <linux/mm.h>
	26	#include <linux/module.h>
	27	#include <linux/platform_device.h>
	28	#include <linux/spi/spi.h>
5e9df924 AV	29	#include <linux/spi/at73c213.h>
5e9df924 AV	30	#include <linux/clk.h>
a745a622	31	#include <linux/i2c/at24.h>
2e9f12d6 AV	32	#include <linux/gpio_keys.h>
2e9f12d6 AV	33	#include <linux/input.h>
b85a8914	34
b85a8914 AV	35	#include <asm/setup.h>
	36	#include <asm/mach-types.h>
	37	#include <asm/irq.h>
	38
	39	#include <asm/mach/arch.h>
	40	#include <asm/mach/map.h>
	41	#include <asm/mach/irq.h>
	42
e505240b	43	#include <mach/hardware.h>
a09e64fb	44	#include <mach/board.h>
3e135466	45	#include <mach/at91_aic.h>
8cdae51a AV	46	#include <mach/at91sam9_smc.h>
8cdae51a AV	47	#include <mach/at91_shdwc.h>
76b2ab76	48	#include <mach/system_rev.h>
b85a8914	49
8cdae51a	50	#include "sam9_smc.h"
b85a8914 AV	51	#include "generic.h"
	52
	53
1b021a3b	54	static void __init ek_init_early(void)
b85a8914 AV	55	{
b85a8914 AV	56	/* Initialize processor: 18.432 MHz crystal */
21d08b9d	57	at91_initialize(18432000);
b85a8914 AV	58	}
b85a8914 AV	59
b85a8914 AV	60	/*
	61	* USB Host port
	62	*/
	63	static struct at91_usbh_data __initdata ek_usbh_data = {
	64	.ports = 2,
63b4c296 JCPV	65	.vbus_pin = {-EINVAL, -EINVAL},
63b4c296 JCPV	66	.overcurrent_pin= {-EINVAL, -EINVAL},
b85a8914 AV	67	};
	68
	69	/*
	70	* USB Device port
	71	*/
	72	static struct at91_udc_data __initdata ek_udc_data = {
	73	.vbus_pin = AT91_PIN_PC5,
63b4c296	74	.pullup_pin = -EINVAL, /* pull-up driven by UDC */
b85a8914 AV	75	};
	76
	77
5e9df924 AV	78	/*
	79	* Audio
	80	*/
	81	static struct at73c213_board_info at73c213_data = {
	82	.ssc_id = 0,
	83	.shortname = "AT91SAM9260-EK external DAC",
	84	};
	85
	86	#if defined(CONFIG_SND_AT73C213) \|\| defined(CONFIG_SND_AT73C213_MODULE)
	87	static void __init at73c213_set_clk(struct at73c213_board_info *info)
	88	{
	89	struct clk *pck0;
	90	struct clk *plla;
	91
	92	pck0 = clk_get(NULL, "pck0");
	93	plla = clk_get(NULL, "plla");
	94
	95	/* AT73C213 MCK Clock */
	96	at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
	97
	98	clk_set_parent(pck0, plla);
	99	clk_put(plla);
	100
	101	info->dac_clk = pck0;
	102	}
	103	#else
	104	static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
	105	#endif
	106
b85a8914 AV	107	/*
	108	* SPI devices.
	109	*/
	110	static struct spi_board_info ek_spi_devices[] = {
4cf3326a	111	#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
b85a8914 AV	112	{ /* DataFlash chip */
	113	.modalias = "mtd_dataflash",
	114	.chip_select = 1,
	115	.max_speed_hz = 15 * 1000 * 1000,
	116	.bus_num = 0,
	117	},
	118	#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
	119	{ /* DataFlash card */
	120	.modalias = "mtd_dataflash",
	121	.chip_select = 0,
	122	.max_speed_hz = 15 * 1000 * 1000,
	123	.bus_num = 0,
	124	},
	125	#endif
	126	#endif
93afa752	127	#if defined(CONFIG_SND_AT73C213) \|\| defined(CONFIG_SND_AT73C213_MODULE)
b85a8914	128	{ /* AT73C213 DAC */
93afa752	129	.modalias = "at73c213",
b85a8914 AV	130	.chip_select = 0,
	131	.max_speed_hz = 10 * 1000 * 1000,
	132	.bus_num = 1,
5e9df924 AV	133	.mode = SPI_MODE_1,
5e9df924 AV	134	.platform_data = &at73c213_data,
b85a8914 AV	135	},
	136	#endif
	137	};
	138
	139
	140	/*
	141	* MACB Ethernet device
	142	*/
84e0cdb0	143	static struct macb_platform_data __initdata ek_macb_data = {
44853a81	144	.phy_irq_pin = AT91_PIN_PA7,
b85a8914 AV	145	.is_rmii = 1,
	146	};
	147
	148
	149	/*
	150	* NAND flash
	151	*/
	152	static struct mtd_partition __initdata ek_nand_partition[] = {
	153	{
	154	.name = "Partition 1",
	155	.offset = 0,
e505240b	156	.size = SZ_256K,
b85a8914 AV	157	},
	158	{
	159	.name = "Partition 2",
e505240b	160	.offset = MTDPART_OFS_NXTBLK,
b85a8914 AV	161	.size = MTDPART_SIZ_FULL,
	162	},
	163	};
	164
3c3796cc	165	static struct atmel_nand_data __initdata ek_nand_data = {
b85a8914 AV	166	.ale = 21,
b85a8914 AV	167	.cle = 22,
63b4c296	168	.det_pin = -EINVAL,
b85a8914 AV	169	.rdy_pin = AT91_PIN_PC13,
b85a8914 AV	170	.enable_pin = AT91_PIN_PC14,
bf4289cb	171	.ecc_mode = NAND_ECC_SOFT,
98619dcb	172	.on_flash_bbt = 1,
1754aab9 DES	173	.parts = ek_nand_partition,
1754aab9 DES	174	.num_parts = ARRAY_SIZE(ek_nand_partition),
b85a8914 AV	175	};
b85a8914 AV	176
8cdae51a AV	177	static struct sam9_smc_config __initdata ek_nand_smc_config = {
	178	.ncs_read_setup = 0,
	179	.nrd_setup = 1,
	180	.ncs_write_setup = 0,
	181	.nwe_setup = 1,
	182
	183	.ncs_read_pulse = 3,
	184	.nrd_pulse = 3,
	185	.ncs_write_pulse = 3,
	186	.nwe_pulse = 3,
	187
	188	.read_cycle = 5,
	189	.write_cycle = 5,
	190
	191	.mode = AT91_SMC_READMODE \| AT91_SMC_WRITEMODE \| AT91_SMC_EXNWMODE_DISABLE,
	192	.tdf_cycles = 2,
	193	};
	194
	195	static void __init ek_add_device_nand(void)
	196	{
64393b3a	197	ek_nand_data.bus_width_16 = board_have_nand_16bit();
8cdae51a AV	198	/* setup bus-width (8 or 16) */
	199	if (ek_nand_data.bus_width_16)
	200	ek_nand_smc_config.mode \|= AT91_SMC_DBW_16;
	201	else
	202	ek_nand_smc_config.mode \|= AT91_SMC_DBW_8;
	203
	204	/* configure chip-select 3 (NAND) */
faee0cc3	205	sam9_smc_configure(0, 3, &ek_nand_smc_config);
8cdae51a AV	206
	207	at91_add_device_nand(&ek_nand_data);
	208	}
	209
b85a8914 AV	210
	211	/*
	212	* MCI (SD/MMC)
	213	*/
4cf3326a LD	214	static struct mci_platform_data __initdata ek_mci0_data = {
	215	.slot[1] = {
	216	.bus_width = 4,
	217	.detect_pin = -EINVAL,
	218	.wp_pin = -EINVAL,
	219	},
b85a8914 AV	220	};
b85a8914 AV	221
5b7659d1 AV	222
	223	/*
	224	* LEDs
	225	*/
	226	static struct gpio_led ek_leds[] = {
	227	{ /* "bottom" led, green, userled1 to be defined */
	228	.name = "ds5",
	229	.gpio = AT91_PIN_PA6,
	230	.active_low = 1,
	231	.default_trigger = "none",
	232	},
	233	{ /* "power" led, yellow */
	234	.name = "ds1",
	235	.gpio = AT91_PIN_PA9,
	236	.default_trigger = "heartbeat",
	237	}
	238	};
	239
a745a622 DB	240	/*
	241	* I2C devices
	242	*/
	243	static struct at24_platform_data at24c512 = {
	244	.byte_len = SZ_512K / 8,
	245	.page_size = 128,
	246	.flags = AT24_FLAG_ADDR16,
	247	};
	248
	249	static struct i2c_board_info __initdata ek_i2c_devices[] = {
	250	{
	251	I2C_BOARD_INFO("24c512", 0x50),
	252	.platform_data = &at24c512,
	253	},
	254	/* more devices can be added using expansion connectors */
	255	};
	256
2e9f12d6 AV	257
	258	/*
	259	* GPIO Buttons
	260	*/
	261	#if defined(CONFIG_KEYBOARD_GPIO) \|\| defined(CONFIG_KEYBOARD_GPIO_MODULE)
	262	static struct gpio_keys_button ek_buttons[] = {
	263	{
	264	.gpio = AT91_PIN_PA30,
	265	.code = BTN_3,
	266	.desc = "Button 3",
	267	.active_low = 1,
	268	.wakeup = 1,
	269	},
	270	{
	271	.gpio = AT91_PIN_PA31,
	272	.code = BTN_4,
	273	.desc = "Button 4",
	274	.active_low = 1,
	275	.wakeup = 1,
	276	}
	277	};
	278
	279	static struct gpio_keys_platform_data ek_button_data = {
	280	.buttons = ek_buttons,
	281	.nbuttons = ARRAY_SIZE(ek_buttons),
	282	};
	283
	284	static struct platform_device ek_button_device = {
	285	.name = "gpio-keys",
	286	.id = -1,
	287	.num_resources = 0,
	288	.dev = {
	289	.platform_data = &ek_button_data,
	290	}
	291	};
	292
	293	static void __init ek_add_device_buttons(void)
	294	{
	295	at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
	296	at91_set_deglitch(AT91_PIN_PA30, 1);
	297	at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
	298	at91_set_deglitch(AT91_PIN_PA31, 1);
	299
	300	platform_device_register(&ek_button_device);
	301	}
	302	#else
	303	static void __init ek_add_device_buttons(void) {}
	304	#endif
	305
	306
b85a8914 AV	307	static void __init ek_board_init(void)
	308	{
	309	/* Serial */
71b149b3 JCPV	310	/* DBGU on ttyS0. (Rx & Tx only) */
	311	at91_register_uart(0, 0, 0);
	312
	313	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
	314	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS \| ATMEL_UART_RTS
	315	\| ATMEL_UART_DTR \| ATMEL_UART_DSR \| ATMEL_UART_DCD
	316	\| ATMEL_UART_RI);
	317
	318	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
	319	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS \| ATMEL_UART_RTS);
b85a8914 AV	320	at91_add_device_serial();
	321	/* USB Host */
	322	at91_add_device_usbh(&ek_usbh_data);
	323	/* USB Device */
	324	at91_add_device_udc(&ek_udc_data);
	325	/* SPI */
	326	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
	327	/* NAND */
8cdae51a	328	ek_add_device_nand();
b85a8914 AV	329	/* Ethernet */
	330	at91_add_device_eth(&ek_macb_data);
	331	/* MMC */
4cf3326a	332	at91_add_device_mci(0, &ek_mci0_data);
93afa752	333	/* I2C */
a745a622	334	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
5e9df924 AV	335	/* SSC (to AT73C213) */
	336	at73c213_set_clk(&at73c213_data);
	337	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
5b7659d1 AV	338	/* LEDs */
5b7659d1 AV	339	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
2e9f12d6 AV	340	/* Push Buttons */
2e9f12d6 AV	341	ek_add_device_buttons();
b85a8914 AV	342	}
	343
	344	MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
	345	/* Maintainer: Atmel */
b85a8914	346	.timer = &at91sam926x_timer,
21d08b9d	347	.map_io = at91_map_io,
3e135466	348	.handle_irq = at91_aic_handle_irq,
1b021a3b	349	.init_early = ek_init_early,
92100c12	350	.init_irq = at91_init_irq_default,
b85a8914 AV	351	.init_machine = ek_board_init,
b85a8914 AV	352	MACHINE_END