[mirror_ubuntu-eoan-kernel.git] / arch / arm / mach-imx / Kconfig

menuconfig ARCH_MXC
	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
	select ARCH_REQUIRE_GPIOLIB
	select ARM_CPU_SUSPEND if PM
	select CLKSRC_MMIO
	select GENERIC_IRQ_CHIP
	select PINCTRL
	select PM_OPP if PM
	select SOC_BUS
	select SRAM
	help
	  Support for Freescale MXC/iMX-based family of processors

if ARCH_MXC

config MXC_TZIC
	bool

config MXC_AVIC
	bool

config MXC_DEBUG_BOARD
	bool "Enable MXC debug board(for 3-stack)"
	help
	  The debug board is an integral part of the MXC 3-stack(PDK)
	  platforms, it can be attached or removed from the peripheral
	  board. On debug board, several debug devices(ethernet, UART,
	  buttons, LEDs and JTAG) are implemented. Between the MCU and
	  these devices, a CPLD is added as a bridge which performs
	  data/address de-multiplexing and decode, signal level shift,
	  interrupt control and various board functions.

config HAVE_EPIT
	bool

config MXC_USE_EPIT
	bool "Use EPIT instead of GPT"
	depends on HAVE_EPIT
	help
	  Use EPIT as the system timer on systems that have it. Normally you
	  don't have a reason to do so as the EPIT has the same features and
	  uses the same clocks as the GPT. Anyway, on some systems the GPT
	  may be in use for other purposes.

config ARCH_HAS_RNGA
	bool

config HAVE_IMX_ANATOP
	bool

config HAVE_IMX_GPC
	bool

config HAVE_IMX_MMDC
	bool

config HAVE_IMX_SRC
	def_bool y if SMP
	select ARCH_HAS_RESET_CONTROLLER

config IMX_HAVE_IOMUX_V1
	bool

config ARCH_MXC_IOMUX_V3
	bool

config SOC_IMX1
	bool
	select CPU_ARM920T
	select IMX_HAVE_IOMUX_V1
	select MXC_AVIC
	select PINCTRL_IMX1

config SOC_IMX21
	bool
	select CPU_ARM926T
	select IMX_HAVE_IOMUX_V1
	select MXC_AVIC

config SOC_IMX25
	bool
	select ARCH_MXC_IOMUX_V3
	select CPU_ARM926T
	select MXC_AVIC
	select PINCTRL_IMX25

config SOC_IMX27
	bool
	select CPU_ARM926T
	select IMX_HAVE_IOMUX_V1
	select MXC_AVIC
	select PINCTRL_IMX27

config SOC_IMX31
	bool
	select CPU_V6
	select IMX_HAVE_PLATFORM_MXC_RNGA
	select MXC_AVIC
	select SMP_ON_UP if SMP

config SOC_IMX35
	bool
	select ARCH_MXC_IOMUX_V3
	select HAVE_EPIT
	select MXC_AVIC
	select PINCTRL_IMX35
	select SMP_ON_UP if SMP

if ARCH_MULTI_V4T

comment "MX1 platforms:"

config MACH_SCB9328
	bool "Synertronixx scb9328"
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX1
	help
	  Say Y here if you are using a Synertronixx scb9328 board

config MACH_APF9328
	bool "APF9328"
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX1
	help
	  Say Yes here if you are using the Armadeus APF9328 development board

config MACH_IMX1_DT
	bool "Support i.MX1 platforms from device tree"
	select SOC_IMX1
	help
	  Include support for Freescale i.MX1 based platforms
	  using the device tree for discovery.

endif

if ARCH_MULTI_V5

comment "MX21 platforms:"

config MACH_MX21ADS
	bool "MX21ADS platform"
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select SOC_IMX21
	help
	  Include support for MX21ADS platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_IMX25_DT
	bool "Support i.MX25 platforms from device tree"
	select SOC_IMX25
	help
	  Include support for Freescale i.MX25 based platforms
	  using the device tree for discovery

comment "MX27 platforms:"

config MACH_MX27ADS
	bool "MX27ADS platform"
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_W1
	select SOC_IMX27
	help
	  Include support for MX27ADS platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX27_3DS
	bool "MX27PDK platform"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_KEYPAD
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MX2_CAMERA
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select MXC_DEBUG_BOARD
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX27
	help
	  Include support for MX27PDK platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_IMX27_VISSTRIM_M10
	bool "Vista Silicon i.MX27 Visstrim_m10"
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MX2_CAMERA
	select IMX_HAVE_PLATFORM_MX2_EMMA
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select LEDS_GPIO_REGISTER
	select SOC_IMX27
	help
	  Include support for Visstrim_m10 platform and its different variants.
	  This includes specific configurations for the board and its
	  peripherals.

config MACH_PCA100
	bool "Phytec phyCARD-s (pca100)"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_W1
	select IMX_HAVE_PLATFORM_SPI_IMX
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX27
	help
	  Include support for phyCARD-s (aka pca100) platform. This
	  includes specific configurations for the module and its peripherals.

config MACH_IMX27_DT
	bool "Support i.MX27 platforms from device tree"
	select SOC_IMX27
	help
	  Include support for Freescale i.MX27 based platforms
	  using the device tree for discovery

endif

if ARCH_MULTI_V6

comment "MX31 platforms:"

config MACH_MX31ADS
	bool "Support MX31ADS platforms"
	default y
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for MX31ADS platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX31ADS_WM1133_EV1
	bool "Support Wolfson Microelectronics 1133-EV1 module"
	depends on MACH_MX31ADS
	depends on MFD_WM8350_I2C
	depends on REGULATOR_WM8350 = y
	help
	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
	  and audio module for the MX31ADS platform.

config MACH_MX31LILLY
	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for mx31 based LILLY1131 modules. This includes
	  specific configurations for the board and its peripherals.

config MACH_MX31LITE
	bool "Support MX31 LITEKIT (LogicPD)"
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_RTC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select LEDS_GPIO_REGISTER
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for MX31 LITEKIT platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_PCM037
	bool "Support Phytec pcm037 (i.MX31) platforms"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_W1
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for Phytec pcm037 platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_PCM037_EET
	bool "Support pcm037 EET board extensions"
	depends on MACH_PCM037
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_SPI_IMX
	help
	  Add support for PCM037 EET baseboard extensions. If you are using the
	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
	  command-line parameter.

config MACH_MX31_3DS
	bool "Support MX31PDK (3DS)"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_KEYPAD
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_SPI_IMX
	select MXC_DEBUG_BOARD
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for MX31PDK (3DS) platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX31_3DS_MXC_NAND_USE_BBT
	bool "Make the MXC NAND driver use the in flash Bad Block Table"
	depends on MACH_MX31_3DS
	depends on MTD_NAND_MXC
	help
	  Enable this if you want that the MXC NAND driver uses the in flash
	  Bad Block Table to know what blocks are bad instead of scanning the
	  entire flash looking for bad block markers.

config MACH_MX31MOBOARD
	bool "Support mx31moboard platforms (EPFL Mobots group)"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_SPI_IMX
	select LEDS_GPIO_REGISTER
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for mx31moboard platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_QONG
	bool "Support Dave/DENX QongEVB-LITE platform"
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for Dave/DENX QongEVB-LITE platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_ARMADILLO5X0
	bool "Support Atmark Armadillo-500 Development Base Board"
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_MMC
	select IMX_HAVE_PLATFORM_MXC_NAND
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX31
	help
	  Include support for Atmark Armadillo-500 platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_KZM_ARM11_01
	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for KZM-ARM11-01. This includes specific
	  configurations for the board and its peripherals.

config MACH_BUG
	bool "Support Buglabs BUGBase platform"
	default y
	select IMX_HAVE_PLATFORM_IMX_UART
	select SOC_IMX31
	help
	  Include support for BUGBase 1.3 platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_IMX31_DT
	bool "Support i.MX31 platforms from device tree"
	select SOC_IMX31
	help
	  Include support for Freescale i.MX31 based platforms
	  using the device tree for discovery.

comment "MX35 platforms:"

config MACH_IMX35_DT
	bool "Support i.MX35 platforms from device tree"
	select SOC_IMX35
	help
	  Include support for Freescale i.MX35 based platforms
	  using the device tree for discovery.

config MACH_PCM043
	bool "Support Phytec pcm043 (i.MX35) platforms"
	select IMX_HAVE_PLATFORM_FLEXCAN
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX35
	help
	  Include support for Phytec pcm043 platform. This includes
	  specific configurations for the board and its peripherals.

config MACH_MX35_3DS
	bool "Support MX35PDK platform"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_FB
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_MXC_RTC
	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
	select MXC_DEBUG_BOARD
	select SOC_IMX35
	help
	  Include support for MX35PDK platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_EUKREA_CPUIMX35SD
	bool "Support Eukrea CPUIMX35 Platform"
	select IMX_HAVE_PLATFORM_FLEXCAN
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
	select USB_ULPI_VIEWPORT if USB_ULPI
	select SOC_IMX35
	help
	  Include support for Eukrea CPUIMX35 platform. This includes
	  specific configurations for the board and its peripherals.

choice
	prompt "Baseboard"
	depends on MACH_EUKREA_CPUIMX35SD
	default MACH_EUKREA_MBIMXSD35_BASEBOARD

config MACH_EUKREA_MBIMXSD35_BASEBOARD
	bool "Eukrea MBIMXSD development board"
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_IMX_SSI
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_SPI_IMX
	select LEDS_GPIO_REGISTER
	help
	  This adds board specific devices that can be found on Eukrea's
	  MBIMXSD evaluation board.

endchoice

config MACH_VPR200
	bool "Support VPR200 platform"
	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	select IMX_HAVE_PLATFORM_GPIO_KEYS
	select IMX_HAVE_PLATFORM_IMX2_WDT
	select IMX_HAVE_PLATFORM_IMX_I2C
	select IMX_HAVE_PLATFORM_IMX_UART
	select IMX_HAVE_PLATFORM_IPU_CORE
	select IMX_HAVE_PLATFORM_MXC_EHCI
	select IMX_HAVE_PLATFORM_MXC_NAND
	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
	select SOC_IMX35
	help
	  Include support for VPR200 platform. This includes specific
	  configurations for the board and its peripherals.

endif

if ARCH_MULTI_V7

comment "Device tree only"

config SOC_IMX5
	bool
	select HAVE_IMX_SRC
	select MXC_TZIC

config	SOC_IMX50
	bool "i.MX50 support"
	select PINCTRL_IMX50
	select SOC_IMX5

	help
	  This enables support for Freescale i.MX50 processor.

config SOC_IMX51
	bool "i.MX51 support"
	select PINCTRL_IMX51
	select SOC_IMX5
	help
	  This enables support for Freescale i.MX51 processor

config	SOC_IMX53
	bool "i.MX53 support"
	select PINCTRL_IMX53
	select SOC_IMX5

	help
	  This enables support for Freescale i.MX53 processor.

config SOC_IMX6
	bool
	select ARM_ERRATA_754322
	select ARM_ERRATA_775420
	select ARM_GIC
	select HAVE_IMX_ANATOP
	select HAVE_IMX_GPC
	select HAVE_IMX_MMDC
	select HAVE_IMX_SRC
	select MFD_SYSCON
	select PL310_ERRATA_769419 if CACHE_L2X0

config SOC_IMX6Q
	bool "i.MX6 Quad/DualLite support"
	select ARM_ERRATA_764369 if SMP
	select HAVE_ARM_SCU if SMP
	select HAVE_ARM_TWD if SMP
	select PCI_DOMAINS if PCI
	select PINCTRL_IMX6Q
	select SOC_IMX6

	help
	  This enables support for Freescale i.MX6 Quad processor.

config SOC_IMX6SL
	bool "i.MX6 SoloLite support"
	select PINCTRL_IMX6SL
	select SOC_IMX6

	help
	  This enables support for Freescale i.MX6 SoloLite processor.

config SOC_IMX6SX
	bool "i.MX6 SoloX support"
	select PINCTRL_IMX6SX
	select SOC_IMX6

	help
	  This enables support for Freescale i.MX6 SoloX processor.

config SOC_VF610
	bool "Vybrid Family VF610 support"
	select ARM_GIC
	select PINCTRL_VF610
	select PL310_ERRATA_769419 if CACHE_L2X0

	help
	  This enables support for Freescale Vybrid VF610 processor.

choice
	prompt "Clocksource for scheduler clock"
	depends on SOC_VF610
	default VF_USE_ARM_GLOBAL_TIMER

	config VF_USE_ARM_GLOBAL_TIMER
		bool "Use ARM Global Timer"
		select ARM_GLOBAL_TIMER
		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
		help
		  Use the ARM Global Timer as clocksource

	config VF_USE_PIT_TIMER
		bool "Use PIT timer"
		select VF_PIT_TIMER
		help
		  Use SoC Periodic Interrupt Timer (PIT) as clocksource

endchoice

config SOC_LS1021A
	bool "Freescale LS1021A support"
	select ARM_GIC
	select HAVE_ARM_ARCH_TIMER
	select PCI_DOMAINS if PCI
	select ZONE_DMA if ARM_LPAE

	help
	  This enables support for Freescale LS1021A processor.

endif

source "arch/arm/mach-imx/devices/Kconfig"

endif
Commit	Line	Data
21278aea	1	menuconfig ARCH_MXC
4cc3c840	2	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 \|\| ARCH_MULTI_V6_V7
c5a0d497	3	select ARCH_REQUIRE_GPIOLIB
f36b594f	4	select ARM_CPU_SUSPEND if PM
c5a0d497	5	select CLKSRC_MMIO
c5a0d497	6	select GENERIC_IRQ_CHIP
f7f3d4b2	7	select PINCTRL
5a1513f6	8	select PM_OPP if PM
a2887546	9	select SOC_BUS
67f5b308	10	select SRAM
c5a0d497 SG	11	help
	12	Support for Freescale MXC/iMX-based family of processors
	13
21278aea	14	if ARCH_MXC
3995eb82	15
3995eb82 SG	16	config MXC_TZIC
	17	bool
	18
	19	config MXC_AVIC
	20	bool
	21
	22	config MXC_DEBUG_BOARD
	23	bool "Enable MXC debug board(for 3-stack)"
	24	help
	25	The debug board is an integral part of the MXC 3-stack(PDK)
	26	platforms, it can be attached or removed from the peripheral
	27	board. On debug board, several debug devices(ethernet, UART,
	28	buttons, LEDs and JTAG) are implemented. Between the MCU and
	29	these devices, a CPLD is added as a bridge which performs
	30	data/address de-multiplexing and decode, signal level shift,
	31	interrupt control and various board functions.
	32
	33	config HAVE_EPIT
	34	bool
	35
	36	config MXC_USE_EPIT
	37	bool "Use EPIT instead of GPT"
	38	depends on HAVE_EPIT
	39	help
	40	Use EPIT as the system timer on systems that have it. Normally you
	41	don't have a reason to do so as the EPIT has the same features and
	42	uses the same clocks as the GPT. Anyway, on some systems the GPT
	43	may be in use for other purposes.
	44
3995eb82 SG	45	config ARCH_HAS_RNGA
	46	bool
	47
e95dddb3 AH	48	config HAVE_IMX_ANATOP
	49	bool
	50
9fbbe689 SG	51	config HAVE_IMX_GPC
	52	bool
	53
	54	config HAVE_IMX_MMDC
	55	bool
	56
	57	config HAVE_IMX_SRC
68b25325	58	def_bool y if SMP
02985b94	59	select ARCH_HAS_RESET_CONTROLLER
9fbbe689	60
267dd34c SG	61	config IMX_HAVE_IOMUX_V1
	62	bool
	63
	64	config ARCH_MXC_IOMUX_V3
	65	bool
	66
e780d239	67	config SOC_IMX1
e48ab1c1	68	bool
e780d239 UKK	69	select CPU_ARM920T
e780d239 UKK	70	select IMX_HAVE_IOMUX_V1
c7259df3	71	select MXC_AVIC
24980dc8	72	select PINCTRL_IMX1
e48ab1c1 UKK	73
	74	config SOC_IMX21
	75	bool
b1b3f49c	76	select CPU_ARM926T
e48ab1c1	77	select IMX_HAVE_IOMUX_V1
c7259df3	78	select MXC_AVIC
e48ab1c1 UKK	79
e48ab1c1 UKK	80	config SOC_IMX25
e780d239	81	bool
b1b3f49c	82	select ARCH_MXC_IOMUX_V3
e48ab1c1	83	select CPU_ARM926T
c7259df3	84	select MXC_AVIC
5bcaa7a3	85	select PINCTRL_IMX25
e48ab1c1 UKK	86
	87	config SOC_IMX27
	88	bool
b1b3f49c	89	select CPU_ARM926T
e48ab1c1	90	select IMX_HAVE_IOMUX_V1
c7259df3	91	select MXC_AVIC
acb350e0	92	select PINCTRL_IMX27
e48ab1c1	93
27ad4bf7 UKK	94	config SOC_IMX31
	95	bool
	96	select CPU_V6
	97	select IMX_HAVE_PLATFORM_MXC_RNGA
27ad4bf7	98	select MXC_AVIC
a89cf59b	99	select SMP_ON_UP if SMP
27ad4bf7 UKK	100
	101	config SOC_IMX35
	102	bool
27ad4bf7	103	select ARCH_MXC_IOMUX_V3
27ad4bf7	104	select HAVE_EPIT
27ad4bf7	105	select MXC_AVIC
c51bcd15	106	select PINCTRL_IMX35
a89cf59b	107	select SMP_ON_UP if SMP
27ad4bf7	108
c5a0d497	109	if ARCH_MULTI_V4T
e780d239	110
07469495	111	comment "MX1 platforms:"
07469495 UKK	112
	113	config MACH_SCB9328
	114	bool "Synertronixx scb9328"
d112f4e4	115	select IMX_HAVE_PLATFORM_IMX_UART
123860e1	116	select SOC_IMX1
07469495 UKK	117	help
	118	Say Y here if you are using a Synertronixx scb9328 board
	119
7fc92c60 GGM	120	config MACH_APF9328
7fc92c60 GGM	121	bool "APF9328"
7a994818	122	select IMX_HAVE_PLATFORM_IMX_I2C
7fc92c60	123	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c	124	select SOC_IMX1
7fc92c60 GGM	125	help
	126	Say Yes here if you are using the Armadeus APF9328 development board
	127
24980dc8 AS	128	config MACH_IMX1_DT
	129	bool "Support i.MX1 platforms from device tree"
	130	select SOC_IMX1
	131	help
	132	Include support for Freescale i.MX1 based platforms
	133	using the device tree for discovery.
	134
c5a0d497 SG	135	endif
	136
	137	if ARCH_MULTI_V5
	138
b6b06be0	139	comment "MX21 platforms:"
80eedae6	140
6b91edde IC	141	config MACH_MX21ADS
6b91edde IC	142	bool "MX21ADS platform"
ad851bff	143	select IMX_HAVE_PLATFORM_IMX_FB
3c5227fd	144	select IMX_HAVE_PLATFORM_IMX_UART
9d3d945a	145	select IMX_HAVE_PLATFORM_MXC_MMC
1f8d721c	146	select IMX_HAVE_PLATFORM_MXC_NAND
b1b3f49c	147	select SOC_IMX21
6b91edde IC	148	help
	149	Include support for MX21ADS platform. This includes specific
	150	configurations for the board and its peripherals.
	151
ef4bac55 SH	152	config MACH_IMX25_DT
	153	bool "Support i.MX25 platforms from device tree"
	154	select SOC_IMX25
	155	help
	156	Include support for Freescale i.MX25 based platforms
	157	using the device tree for discovery
	158
b6b06be0 UKK	159	comment "MX27 platforms:"
b6b06be0 UKK	160
80eedae6 JB	161	config MACH_MX27ADS
80eedae6 JB	162	bool "MX27ADS platform"
ad851bff	163	select IMX_HAVE_PLATFORM_IMX_FB
c6987159	164	select IMX_HAVE_PLATFORM_IMX_I2C
d5dac4a6	165	select IMX_HAVE_PLATFORM_IMX_UART
9d3d945a	166	select IMX_HAVE_PLATFORM_MXC_MMC
0e7a29a8	167	select IMX_HAVE_PLATFORM_MXC_NAND
ae71a562	168	select IMX_HAVE_PLATFORM_MXC_W1
b1b3f49c	169	select SOC_IMX27
80eedae6 JB	170	help
	171	Include support for MX27ADS platform. This includes specific
	172	configurations for the board and its peripherals.
7e5e9f54	173
ec9be0de FE	174	config MACH_MX27_3DS
ec9be0de FE	175	bool "MX27PDK platform"
96cf4239	176	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
8be9252f	177	select IMX_HAVE_PLATFORM_IMX2_WDT
1abcb4cc	178	select IMX_HAVE_PLATFORM_IMX_FB
5885f036	179	select IMX_HAVE_PLATFORM_IMX_I2C
3f880141	180	select IMX_HAVE_PLATFORM_IMX_KEYPAD
688b5cbb	181	select IMX_HAVE_PLATFORM_IMX_SSI
d5dac4a6	182	select IMX_HAVE_PLATFORM_IMX_UART
4c11c286	183	select IMX_HAVE_PLATFORM_MX2_CAMERA
96cf4239	184	select IMX_HAVE_PLATFORM_MXC_EHCI
9d3d945a	185	select IMX_HAVE_PLATFORM_MXC_MMC
c67a3e09	186	select IMX_HAVE_PLATFORM_SPI_IMX
92cb33f1	187	select MXC_DEBUG_BOARD
794987ac	188	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	189	select SOC_IMX27
ec9be0de FE	190	help
	191	Include support for MX27PDK platform. This includes specific
	192	configurations for the board and its peripherals.
8c032ec3	193
3b161e51 JM	194	config MACH_IMX27_VISSTRIM_M10
3b161e51 JM	195	bool "Vista Silicon i.MX27 Visstrim_m10"
5309498a	196	select IMX_HAVE_PLATFORM_GPIO_KEYS
3b161e51	197	select IMX_HAVE_PLATFORM_IMX_I2C
5658bff6	198	select IMX_HAVE_PLATFORM_IMX_SSI
3b161e51	199	select IMX_HAVE_PLATFORM_IMX_UART
f52f5a55	200	select IMX_HAVE_PLATFORM_MX2_CAMERA
3ab3a350	201	select IMX_HAVE_PLATFORM_MX2_EMMA
2eb42d5c	202	select IMX_HAVE_PLATFORM_MXC_EHCI
32189139	203	select IMX_HAVE_PLATFORM_MXC_MMC
acb6464c	204	select LEDS_GPIO_REGISTER
b1b3f49c	205	select SOC_IMX27
3b161e51 JM	206	help
	207	Include support for Visstrim_m10 platform and its different variants.
	208	This includes specific configurations for the board and its
	209	peripherals.
	210
33731698 LF	211	config MACH_PCA100
33731698 LF	212	bool "Phytec phyCARD-s (pca100)"
bd455ed3	213	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
e0a1961d	214	select IMX_HAVE_PLATFORM_IMX2_WDT
ad851bff	215	select IMX_HAVE_PLATFORM_IMX_FB
c6987159	216	select IMX_HAVE_PLATFORM_IMX_I2C
4697bb92	217	select IMX_HAVE_PLATFORM_IMX_SSI
d5dac4a6	218	select IMX_HAVE_PLATFORM_IMX_UART
2eb42d5c	219	select IMX_HAVE_PLATFORM_MXC_EHCI
9d3d945a	220	select IMX_HAVE_PLATFORM_MXC_MMC
0e7a29a8	221	select IMX_HAVE_PLATFORM_MXC_NAND
ae71a562	222	select IMX_HAVE_PLATFORM_MXC_W1
7536cf99	223	select IMX_HAVE_PLATFORM_SPI_IMX
794987ac	224	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	225	select SOC_IMX27
33731698 LF	226	help
	227	Include support for phyCARD-s (aka pca100) platform. This
	228	includes specific configurations for the module and its peripherals.
	229
9f0749e3 SH	230	config MACH_IMX27_DT
	231	bool "Support i.MX27 platforms from device tree"
	232	select SOC_IMX27
9f0749e3 SH	233	help
	234	Include support for Freescale i.MX27 based platforms
	235	using the device tree for discovery
	236
6bbdbf2f	237	endif
27ad4bf7	238
c5a0d497	239	if ARCH_MULTI_V6
27ad4bf7 UKK	240
	241	comment "MX31 platforms:"
	242
	243	config MACH_MX31ADS
	244	bool "Support MX31ADS platforms"
b1b3f49c	245	default y
27ad4bf7 UKK	246	select IMX_HAVE_PLATFORM_IMX_I2C
	247	select IMX_HAVE_PLATFORM_IMX_SSI
	248	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c	249	select SOC_IMX31
27ad4bf7 UKK	250	help
	251	Include support for MX31ADS platform. This includes specific
	252	configurations for the board and its peripherals.
	253
	254	config MACH_MX31ADS_WM1133_EV1
	255	bool "Support Wolfson Microelectronics 1133-EV1 module"
	256	depends on MACH_MX31ADS
	257	depends on MFD_WM8350_I2C
69eb383a	258	depends on REGULATOR_WM8350 = y
27ad4bf7 UKK	259	help
	260	Include support for the Wolfson Microelectronics 1133-EV1 PMU
	261	and audio module for the MX31ADS platform.
	262
	263	config MACH_MX31LILLY
	264	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
27ad4bf7 UKK	265	select IMX_HAVE_PLATFORM_IMX_UART
	266	select IMX_HAVE_PLATFORM_IPU_CORE
	267	select IMX_HAVE_PLATFORM_MXC_EHCI
	268	select IMX_HAVE_PLATFORM_MXC_MMC
	269	select IMX_HAVE_PLATFORM_SPI_IMX
794987ac	270	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	271	select SOC_IMX31
27ad4bf7 UKK	272	help
	273	Include support for mx31 based LILLY1131 modules. This includes
	274	specific configurations for the board and its peripherals.
	275
	276	config MACH_MX31LITE
	277	bool "Support MX31 LITEKIT (LogicPD)"
27ad4bf7 UKK	278	select IMX_HAVE_PLATFORM_IMX2_WDT
	279	select IMX_HAVE_PLATFORM_IMX_UART
	280	select IMX_HAVE_PLATFORM_MXC_EHCI
	281	select IMX_HAVE_PLATFORM_MXC_MMC
	282	select IMX_HAVE_PLATFORM_MXC_NAND
	283	select IMX_HAVE_PLATFORM_MXC_RTC
	284	select IMX_HAVE_PLATFORM_SPI_IMX
47e837b5	285	select LEDS_GPIO_REGISTER
794987ac	286	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	287	select SOC_IMX31
27ad4bf7 UKK	288	help
	289	Include support for MX31 LITEKIT platform. This includes specific
	290	configurations for the board and its peripherals.
	291
	292	config MACH_PCM037
	293	bool "Support Phytec pcm037 (i.MX31) platforms"
27ad4bf7 UKK	294	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	295	select IMX_HAVE_PLATFORM_IMX2_WDT
	296	select IMX_HAVE_PLATFORM_IMX_I2C
	297	select IMX_HAVE_PLATFORM_IMX_UART
	298	select IMX_HAVE_PLATFORM_IPU_CORE
	299	select IMX_HAVE_PLATFORM_MXC_EHCI
	300	select IMX_HAVE_PLATFORM_MXC_MMC
	301	select IMX_HAVE_PLATFORM_MXC_NAND
	302	select IMX_HAVE_PLATFORM_MXC_W1
794987ac	303	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	304	select SOC_IMX31
27ad4bf7 UKK	305	help
	306	Include support for Phytec pcm037 platform. This includes
	307	specific configurations for the board and its peripherals.
	308
	309	config MACH_PCM037_EET
	310	bool "Support pcm037 EET board extensions"
	311	depends on MACH_PCM037
	312	select IMX_HAVE_PLATFORM_GPIO_KEYS
	313	select IMX_HAVE_PLATFORM_SPI_IMX
	314	help
	315	Add support for PCM037 EET baseboard extensions. If you are using the
	316	OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
	317	command-line parameter.
	318
	319	config MACH_MX31_3DS
	320	bool "Support MX31PDK (3DS)"
27ad4bf7 UKK	321	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	322	select IMX_HAVE_PLATFORM_IMX2_WDT
	323	select IMX_HAVE_PLATFORM_IMX_I2C
	324	select IMX_HAVE_PLATFORM_IMX_KEYPAD
3ef7cf18	325	select IMX_HAVE_PLATFORM_IMX_SSI
27ad4bf7 UKK	326	select IMX_HAVE_PLATFORM_IMX_UART
	327	select IMX_HAVE_PLATFORM_IPU_CORE
	328	select IMX_HAVE_PLATFORM_MXC_EHCI
d093d5bb	329	select IMX_HAVE_PLATFORM_MXC_MMC
27ad4bf7 UKK	330	select IMX_HAVE_PLATFORM_MXC_NAND
27ad4bf7 UKK	331	select IMX_HAVE_PLATFORM_SPI_IMX
b1b3f49c	332	select MXC_DEBUG_BOARD
794987ac	333	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	334	select SOC_IMX31
27ad4bf7 UKK	335	help
	336	Include support for MX31PDK (3DS) platform. This includes specific
	337	configurations for the board and its peripherals.
	338
	339	config MACH_MX31_3DS_MXC_NAND_USE_BBT
	340	bool "Make the MXC NAND driver use the in flash Bad Block Table"
	341	depends on MACH_MX31_3DS
	342	depends on MTD_NAND_MXC
	343	help
	344	Enable this if you want that the MXC NAND driver uses the in flash
	345	Bad Block Table to know what blocks are bad instead of scanning the
	346	entire flash looking for bad block markers.
	347
	348	config MACH_MX31MOBOARD
	349	bool "Support mx31moboard platforms (EPFL Mobots group)"
27ad4bf7	350	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
31776fbc	351	select IMX_HAVE_PLATFORM_IMX2_WDT
27ad4bf7	352	select IMX_HAVE_PLATFORM_IMX_I2C
2f7b9451	353	select IMX_HAVE_PLATFORM_IMX_SSI
27ad4bf7 UKK	354	select IMX_HAVE_PLATFORM_IMX_UART
	355	select IMX_HAVE_PLATFORM_IPU_CORE
	356	select IMX_HAVE_PLATFORM_MXC_EHCI
	357	select IMX_HAVE_PLATFORM_MXC_MMC
	358	select IMX_HAVE_PLATFORM_SPI_IMX
47e837b5	359	select LEDS_GPIO_REGISTER
794987ac	360	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	361	select SOC_IMX31
27ad4bf7 UKK	362	help
	363	Include support for mx31moboard platform. This includes specific
	364	configurations for the board and its peripherals.
	365
	366	config MACH_QONG
	367	bool "Support Dave/DENX QongEVB-LITE platform"
bbb43363	368	select IMX_HAVE_PLATFORM_IMX2_WDT
b1b3f49c RK	369	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c RK	370	select SOC_IMX31
27ad4bf7 UKK	371	help
	372	Include support for Dave/DENX QongEVB-LITE platform. This includes
	373	specific configurations for the board and its peripherals.
	374
	375	config MACH_ARMADILLO5X0
	376	bool "Support Atmark Armadillo-500 Development Base Board"
27ad4bf7 UKK	377	select IMX_HAVE_PLATFORM_GPIO_KEYS
	378	select IMX_HAVE_PLATFORM_IMX_I2C
	379	select IMX_HAVE_PLATFORM_IMX_UART
	380	select IMX_HAVE_PLATFORM_IPU_CORE
	381	select IMX_HAVE_PLATFORM_MXC_EHCI
	382	select IMX_HAVE_PLATFORM_MXC_MMC
	383	select IMX_HAVE_PLATFORM_MXC_NAND
794987ac	384	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	385	select SOC_IMX31
27ad4bf7 UKK	386	help
	387	Include support for Atmark Armadillo-500 platform. This includes
	388	specific configurations for the board and its peripherals.
	389
	390	config MACH_KZM_ARM11_01
	391	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
27ad4bf7	392	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c	393	select SOC_IMX31
27ad4bf7 UKK	394	help
	395	Include support for KZM-ARM11-01. This includes specific
	396	configurations for the board and its peripherals.
	397
	398	config MACH_BUG
	399	bool "Support Buglabs BUGBase platform"
27ad4bf7	400	default y
b1b3f49c RK	401	select IMX_HAVE_PLATFORM_IMX_UART
b1b3f49c RK	402	select SOC_IMX31
27ad4bf7 UKK	403	help
	404	Include support for BUGBase 1.3 platform. This includes specific
	405	configurations for the board and its peripherals.
	406
d2a37b3d DGC	407	config MACH_IMX31_DT
	408	bool "Support i.MX31 platforms from device tree"
	409	select SOC_IMX31
d2a37b3d DGC	410	help
	411	Include support for Freescale i.MX31 based platforms
	412	using the device tree for discovery.
	413
27ad4bf7 UKK	414	comment "MX35 platforms:"
27ad4bf7 UKK	415
a55a3d72 ST	416	config MACH_IMX35_DT
	417	bool "Support i.MX35 platforms from device tree"
	418	select SOC_IMX35
	419	help
	420	Include support for Freescale i.MX35 based platforms
	421	using the device tree for discovery.
	422
27ad4bf7 UKK	423	config MACH_PCM043
27ad4bf7 UKK	424	bool "Support Phytec pcm043 (i.MX35) platforms"
27ad4bf7 UKK	425	select IMX_HAVE_PLATFORM_FLEXCAN
	426	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	427	select IMX_HAVE_PLATFORM_IMX2_WDT
	428	select IMX_HAVE_PLATFORM_IMX_I2C
	429	select IMX_HAVE_PLATFORM_IMX_SSI
	430	select IMX_HAVE_PLATFORM_IMX_UART
	431	select IMX_HAVE_PLATFORM_IPU_CORE
	432	select IMX_HAVE_PLATFORM_MXC_EHCI
	433	select IMX_HAVE_PLATFORM_MXC_NAND
	434	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
794987ac	435	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	436	select SOC_IMX35
27ad4bf7 UKK	437	help
	438	Include support for Phytec pcm043 platform. This includes
	439	specific configurations for the board and its peripherals.
	440
	441	config MACH_MX35_3DS
	442	bool "Support MX35PDK platform"
27ad4bf7 UKK	443	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
27ad4bf7 UKK	444	select IMX_HAVE_PLATFORM_IMX2_WDT
8e3e26a8	445	select IMX_HAVE_PLATFORM_IMX_FB
27ad4bf7 UKK	446	select IMX_HAVE_PLATFORM_IMX_I2C
27ad4bf7 UKK	447	select IMX_HAVE_PLATFORM_IMX_UART
8e3e26a8	448	select IMX_HAVE_PLATFORM_IPU_CORE
27ad4bf7 UKK	449	select IMX_HAVE_PLATFORM_MXC_EHCI
27ad4bf7 UKK	450	select IMX_HAVE_PLATFORM_MXC_NAND
c6fd6d11	451	select IMX_HAVE_PLATFORM_MXC_RTC
27ad4bf7	452	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
b1b3f49c RK	453	select MXC_DEBUG_BOARD
b1b3f49c RK	454	select SOC_IMX35
27ad4bf7 UKK	455	help
	456	Include support for MX35PDK platform. This includes specific
	457	configurations for the board and its peripherals.
	458
a69aa72a	459	config MACH_EUKREA_CPUIMX35SD
27ad4bf7	460	bool "Support Eukrea CPUIMX35 Platform"
27ad4bf7 UKK	461	select IMX_HAVE_PLATFORM_FLEXCAN
	462	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	463	select IMX_HAVE_PLATFORM_IMX2_WDT
	464	select IMX_HAVE_PLATFORM_IMX_I2C
	465	select IMX_HAVE_PLATFORM_IMX_UART
	466	select IMX_HAVE_PLATFORM_MXC_EHCI
	467	select IMX_HAVE_PLATFORM_MXC_NAND
	468	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
794987ac	469	select USB_ULPI_VIEWPORT if USB_ULPI
b1b3f49c	470	select SOC_IMX35
27ad4bf7 UKK	471	help
	472	Include support for Eukrea CPUIMX35 platform. This includes
	473	specific configurations for the board and its peripherals.
	474
	475	choice
	476	prompt "Baseboard"
a69aa72a	477	depends on MACH_EUKREA_CPUIMX35SD
27ad4bf7 UKK	478	default MACH_EUKREA_MBIMXSD35_BASEBOARD
	479
	480	config MACH_EUKREA_MBIMXSD35_BASEBOARD
	481	bool "Eukrea MBIMXSD development board"
	482	select IMX_HAVE_PLATFORM_GPIO_KEYS
	483	select IMX_HAVE_PLATFORM_IMX_SSI
	484	select IMX_HAVE_PLATFORM_IPU_CORE
0e189858	485	select IMX_HAVE_PLATFORM_SPI_IMX
47e837b5	486	select LEDS_GPIO_REGISTER
27ad4bf7 UKK	487	help
	488	This adds board specific devices that can be found on Eukrea's
	489	MBIMXSD evaluation board.
	490
	491	endchoice
	492
	493	config MACH_VPR200
	494	bool "Support VPR200 platform"
27ad4bf7 UKK	495	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
	496	select IMX_HAVE_PLATFORM_GPIO_KEYS
	497	select IMX_HAVE_PLATFORM_IMX2_WDT
27ad4bf7	498	select IMX_HAVE_PLATFORM_IMX_I2C
b1b3f49c	499	select IMX_HAVE_PLATFORM_IMX_UART
27ad4bf7 UKK	500	select IMX_HAVE_PLATFORM_IPU_CORE
	501	select IMX_HAVE_PLATFORM_MXC_EHCI
	502	select IMX_HAVE_PLATFORM_MXC_NAND
	503	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
b1b3f49c	504	select SOC_IMX35
27ad4bf7 UKK	505	help
	506	Include support for VPR200 platform. This includes specific
	507	configurations for the board and its peripherals.
	508
c5a0d497 SG	509	endif
	510
	511	if ARCH_MULTI_V7
	512
442279da	513	comment "Device tree only"
784a90c0	514
50e177ca SG	515	config SOC_IMX5
50e177ca SG	516	bool
50e177ca SG	517	select HAVE_IMX_SRC
	518	select MXC_TZIC
	519
361b0a41 GU	520	config SOC_IMX50
361b0a41 GU	521	bool "i.MX50 support"
f7f3d4b2	522	select PINCTRL_IMX50
361b0a41 GU	523	select SOC_IMX5
	524
	525	help
	526	This enables support for Freescale i.MX50 processor.
	527
1ecdde9d	528	config SOC_IMX51
8da4d6b2	529	bool "i.MX51 support"
1ecdde9d SG	530	select PINCTRL_IMX51
1ecdde9d SG	531	select SOC_IMX5
8da4d6b2 FE	532	help
	533	This enables support for Freescale i.MX51 processor
	534
442279da SG	535	config SOC_IMX53
442279da SG	536	bool "i.MX53 support"
442279da	537	select PINCTRL_IMX53
b1b3f49c	538	select SOC_IMX5
784a90c0	539
784a90c0	540	help
442279da	541	This enables support for Freescale i.MX53 processor.
bac89d75	542
94f890ec SG	543	config SOC_IMX6
94f890ec SG	544	bool
96efb44e	545	select ARM_ERRATA_754322
96efb44e	546	select ARM_ERRATA_775420
bac89d75	547	select ARM_GIC
e95dddb3	548	select HAVE_IMX_ANATOP
9fbbe689 SG	549	select HAVE_IMX_GPC
9fbbe689 SG	550	select HAVE_IMX_MMDC
aec99b7b	551	select HAVE_IMX_SRC
baa64151	552	select MFD_SYSCON
a641f3a6	553	select PL310_ERRATA_769419 if CACHE_L2X0
bac89d75	554
94f890ec SG	555	config SOC_IMX6Q
	556	bool "i.MX6 Quad/DualLite support"
	557	select ARM_ERRATA_764369 if SMP
	558	select HAVE_ARM_SCU if SMP
	559	select HAVE_ARM_TWD if SMP
94f890ec SG	560	select PCI_DOMAINS if PCI
	561	select PINCTRL_IMX6Q
	562	select SOC_IMX6
	563
bac89d75 SG	564	help
	565	This enables support for Freescale i.MX6 Quad processor.
	566
31a2fbf7 SG	567	config SOC_IMX6SL
31a2fbf7 SG	568	bool "i.MX6 SoloLite support"
31a2fbf7	569	select PINCTRL_IMX6SL
94f890ec	570	select SOC_IMX6
31a2fbf7 SG	571
	572	help
	573	This enables support for Freescale i.MX6 SoloLite processor.
	574
d9654dce SG	575	config SOC_IMX6SX
	576	bool "i.MX6 SoloX support"
	577	select PINCTRL_IMX6SX
	578	select SOC_IMX6
	579
	580	help
	581	This enables support for Freescale i.MX6 SoloX processor.
	582
5be913c6 JL	583	config SOC_VF610
5be913c6 JL	584	bool "Vybrid Family VF610 support"
5be913c6	585	select ARM_GIC
5be913c6	586	select PINCTRL_VF610
a641f3a6	587	select PL310_ERRATA_769419 if CACHE_L2X0
5be913c6 JL	588
5be913c6 JL	589	help
c6891ef8	590	This enables support for Freescale Vybrid VF610 processor.
5be913c6	591
2a61cba7 SA	592	choice
	593	prompt "Clocksource for scheduler clock"
	594	depends on SOC_VF610
	595	default VF_USE_ARM_GLOBAL_TIMER
	596
	597	config VF_USE_ARM_GLOBAL_TIMER
	598	bool "Use ARM Global Timer"
	599	select ARM_GLOBAL_TIMER
	600	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
	601	help
	602	Use the ARM Global Timer as clocksource
	603
	604	config VF_USE_PIT_TIMER
	605	bool "Use PIT timer"
	606	select VF_PIT_TIMER
	607	help
	608	Use SoC Periodic Interrupt Timer (PIT) as clocksource
	609
	610	endchoice
	611
7f0fb610 JL	612	config SOC_LS1021A
	613	bool "Freescale LS1021A support"
	614	select ARM_GIC
	615	select HAVE_ARM_ARCH_TIMER
7f0fb610 JL	616	select PCI_DOMAINS if PCI
	617	select ZONE_DMA if ARM_LPAE
	618
	619	help
c6891ef8	620	This enables support for Freescale LS1021A processor.
7f0fb610	621
27ad4bf7	622	endif
e0557c0d SG	623
e0557c0d SG	624	source "arch/arm/mach-imx/devices/Kconfig"
3995eb82	625
21278aea	626	endif