]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
fa87cedd | 2 | * arch/arm/mach-ixp2000/core.c |
1da177e4 LT |
3 | * |
4 | * Common routines used by all IXP2400/2800 based platforms. | |
5 | * | |
6 | * Author: Deepak Saxena <dsaxena@plexity.net> | |
7 | * | |
8 | * Copyright 2004 (C) MontaVista Software, Inc. | |
9 | * | |
10 | * Based on work Copyright (C) 2002-2003 Intel Corporation | |
11 | * | |
12 | * This file is licensed under the terms of the GNU General Public | |
13 | * License version 2. This program is licensed "as is" without any | |
14 | * warranty of any kind, whether express or implied. | |
15 | */ | |
16 | ||
1da177e4 LT |
17 | #include <linux/kernel.h> |
18 | #include <linux/init.h> | |
19 | #include <linux/spinlock.h> | |
20 | #include <linux/sched.h> | |
21 | #include <linux/interrupt.h> | |
64ffae8a | 22 | #include <linux/irq.h> |
1da177e4 LT |
23 | #include <linux/serial.h> |
24 | #include <linux/tty.h> | |
25 | #include <linux/bitops.h> | |
28187f2c | 26 | #include <linux/serial_8250.h> |
1da177e4 LT |
27 | #include <linux/mm.h> |
28 | ||
29 | #include <asm/types.h> | |
30 | #include <asm/setup.h> | |
31 | #include <asm/memory.h> | |
a09e64fb | 32 | #include <mach/hardware.h> |
1da177e4 LT |
33 | #include <asm/irq.h> |
34 | #include <asm/system.h> | |
35 | #include <asm/tlbflush.h> | |
36 | #include <asm/pgtable.h> | |
37 | ||
38 | #include <asm/mach/map.h> | |
39 | #include <asm/mach/time.h> | |
40 | #include <asm/mach/irq.h> | |
41 | ||
a09e64fb | 42 | #include <mach/gpio.h> |
c4982887 | 43 | |
1da177e4 LT |
44 | static DEFINE_SPINLOCK(ixp2000_slowport_lock); |
45 | static unsigned long ixp2000_slowport_irq_flags; | |
46 | ||
47 | /************************************************************************* | |
48 | * Slowport access routines | |
49 | *************************************************************************/ | |
50 | void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) | |
51 | { | |
1da177e4 LT |
52 | spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); |
53 | ||
54 | old_cfg->CCR = *IXP2000_SLOWPORT_CCR; | |
55 | old_cfg->WTC = *IXP2000_SLOWPORT_WTC2; | |
56 | old_cfg->RTC = *IXP2000_SLOWPORT_RTC2; | |
57 | old_cfg->PCR = *IXP2000_SLOWPORT_PCR; | |
58 | old_cfg->ADC = *IXP2000_SLOWPORT_ADC; | |
59 | ||
60 | ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR); | |
61 | ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); | |
62 | ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); | |
63 | ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); | |
e9b72e43 | 64 | ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC); |
1da177e4 LT |
65 | } |
66 | ||
67 | void ixp2000_release_slowport(struct slowport_cfg *old_cfg) | |
68 | { | |
69 | ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR); | |
70 | ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); | |
71 | ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); | |
72 | ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); | |
e9b72e43 | 73 | ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC); |
1da177e4 LT |
74 | |
75 | spin_unlock_irqrestore(&ixp2000_slowport_lock, | |
76 | ixp2000_slowport_irq_flags); | |
77 | } | |
78 | ||
79 | /************************************************************************* | |
80 | * Chip specific mappings shared by all IXP2000 systems | |
81 | *************************************************************************/ | |
82 | static struct map_desc ixp2000_io_desc[] __initdata = { | |
83 | { | |
84 | .virtual = IXP2000_CAP_VIRT_BASE, | |
db0d087e | 85 | .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), |
1da177e4 | 86 | .length = IXP2000_CAP_SIZE, |
db5b7169 | 87 | .type = MT_DEVICE, |
1da177e4 LT |
88 | }, { |
89 | .virtual = IXP2000_INTCTL_VIRT_BASE, | |
db0d087e | 90 | .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), |
1da177e4 | 91 | .length = IXP2000_INTCTL_SIZE, |
db5b7169 | 92 | .type = MT_DEVICE, |
1da177e4 LT |
93 | }, { |
94 | .virtual = IXP2000_PCI_CREG_VIRT_BASE, | |
db0d087e | 95 | .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), |
1da177e4 | 96 | .length = IXP2000_PCI_CREG_SIZE, |
db5b7169 | 97 | .type = MT_DEVICE, |
1da177e4 LT |
98 | }, { |
99 | .virtual = IXP2000_PCI_CSR_VIRT_BASE, | |
db0d087e | 100 | .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), |
1da177e4 | 101 | .length = IXP2000_PCI_CSR_SIZE, |
db5b7169 | 102 | .type = MT_DEVICE, |
baaf7ed1 LB |
103 | }, { |
104 | .virtual = IXP2000_MSF_VIRT_BASE, | |
db0d087e | 105 | .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), |
baaf7ed1 | 106 | .length = IXP2000_MSF_SIZE, |
db5b7169 | 107 | .type = MT_DEVICE, |
dd29c727 LB |
108 | }, { |
109 | .virtual = IXP2000_SCRATCH_RING_VIRT_BASE, | |
110 | .pfn = __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE), | |
111 | .length = IXP2000_SCRATCH_RING_SIZE, | |
db5b7169 | 112 | .type = MT_DEVICE, |
dd29c727 LB |
113 | }, { |
114 | .virtual = IXP2000_SRAM0_VIRT_BASE, | |
115 | .pfn = __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE), | |
116 | .length = IXP2000_SRAM0_SIZE, | |
db5b7169 | 117 | .type = MT_DEVICE, |
1da177e4 LT |
118 | }, { |
119 | .virtual = IXP2000_PCI_IO_VIRT_BASE, | |
db0d087e | 120 | .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), |
1da177e4 | 121 | .length = IXP2000_PCI_IO_SIZE, |
db5b7169 | 122 | .type = MT_DEVICE, |
1da177e4 LT |
123 | }, { |
124 | .virtual = IXP2000_PCI_CFG0_VIRT_BASE, | |
db0d087e | 125 | .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), |
1da177e4 | 126 | .length = IXP2000_PCI_CFG0_SIZE, |
db5b7169 | 127 | .type = MT_DEVICE, |
1da177e4 LT |
128 | }, { |
129 | .virtual = IXP2000_PCI_CFG1_VIRT_BASE, | |
db0d087e | 130 | .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), |
1da177e4 | 131 | .length = IXP2000_PCI_CFG1_SIZE, |
db5b7169 | 132 | .type = MT_DEVICE, |
1da177e4 LT |
133 | } |
134 | }; | |
135 | ||
1da177e4 LT |
136 | void __init ixp2000_map_io(void) |
137 | { | |
1da177e4 | 138 | iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); |
1da177e4 LT |
139 | |
140 | /* Set slowport to 8-bit mode. */ | |
e9b72e43 | 141 | ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1); |
1da177e4 LT |
142 | } |
143 | ||
28187f2c LB |
144 | |
145 | /************************************************************************* | |
146 | * Serial port support for IXP2000 | |
147 | *************************************************************************/ | |
148 | static struct plat_serial8250_port ixp2000_serial_port[] = { | |
149 | { | |
150 | .mapbase = IXP2000_UART_PHYS_BASE, | |
151 | .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), | |
152 | .irq = IRQ_IXP2000_UART, | |
153 | .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, | |
154 | .iotype = UPIO_MEM, | |
155 | .regshift = 2, | |
156 | .uartclk = 50000000, | |
157 | }, | |
158 | { }, | |
159 | }; | |
160 | ||
161 | static struct resource ixp2000_uart_resource = { | |
162 | .start = IXP2000_UART_PHYS_BASE, | |
702c96d5 | 163 | .end = IXP2000_UART_PHYS_BASE + 0x1f, |
28187f2c LB |
164 | .flags = IORESOURCE_MEM, |
165 | }; | |
166 | ||
167 | static struct platform_device ixp2000_serial_device = { | |
168 | .name = "serial8250", | |
6df29deb | 169 | .id = PLAT8250_DEV_PLATFORM, |
28187f2c LB |
170 | .dev = { |
171 | .platform_data = ixp2000_serial_port, | |
172 | }, | |
173 | .num_resources = 1, | |
174 | .resource = &ixp2000_uart_resource, | |
175 | }; | |
176 | ||
177 | void __init ixp2000_uart_init(void) | |
178 | { | |
179 | platform_device_register(&ixp2000_serial_device); | |
180 | } | |
181 | ||
182 | ||
1da177e4 LT |
183 | /************************************************************************* |
184 | * Timer-tick functions for IXP2000 | |
185 | *************************************************************************/ | |
186 | static unsigned ticks_per_jiffy; | |
187 | static unsigned ticks_per_usec; | |
188 | static unsigned next_jiffy_time; | |
e4fe1981 | 189 | static volatile unsigned long *missing_jiffy_timer_csr; |
1da177e4 LT |
190 | |
191 | unsigned long ixp2000_gettimeoffset (void) | |
192 | { | |
193 | unsigned long offset; | |
194 | ||
e4fe1981 | 195 | offset = next_jiffy_time - *missing_jiffy_timer_csr; |
1da177e4 LT |
196 | |
197 | return offset / ticks_per_usec; | |
198 | } | |
199 | ||
0cd61b68 | 200 | static int ixp2000_timer_interrupt(int irq, void *dev_id) |
1da177e4 | 201 | { |
1da177e4 | 202 | /* clear timer 1 */ |
e9b72e43 | 203 | ixp2000_reg_wrb(IXP2000_T1_CLR, 1); |
c4982887 | 204 | |
f869afab LB |
205 | while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr) |
206 | >= ticks_per_jiffy) { | |
0cd61b68 | 207 | timer_tick(); |
1da177e4 LT |
208 | next_jiffy_time -= ticks_per_jiffy; |
209 | } | |
210 | ||
1da177e4 LT |
211 | return IRQ_HANDLED; |
212 | } | |
213 | ||
214 | static struct irqaction ixp2000_timer_irq = { | |
215 | .name = "IXP2000 Timer Tick", | |
b30fabad | 216 | .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
09b8b5f8 | 217 | .handler = ixp2000_timer_interrupt, |
1da177e4 LT |
218 | }; |
219 | ||
220 | void __init ixp2000_init_time(unsigned long tick_rate) | |
221 | { | |
1da177e4 LT |
222 | ticks_per_jiffy = (tick_rate + HZ/2) / HZ; |
223 | ticks_per_usec = tick_rate / 1000000; | |
224 | ||
e4fe1981 LB |
225 | /* |
226 | * We use timer 1 as our timer interrupt. | |
227 | */ | |
228 | ixp2000_reg_write(IXP2000_T1_CLR, 0); | |
1da177e4 LT |
229 | ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); |
230 | ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); | |
231 | ||
232 | /* | |
e4fe1981 LB |
233 | * We use a second timer as a monotonic counter for tracking |
234 | * missed jiffies. The IXP2000 has four timers, but if we're | |
235 | * on an A-step IXP2800, timer 2 and 3 don't work, so on those | |
236 | * chips we use timer 4. Timer 4 is the only timer that can | |
237 | * be used for the watchdog, so we use timer 2 if we're on a | |
238 | * non-buggy chip. | |
1da177e4 | 239 | */ |
e4fe1981 LB |
240 | if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { |
241 | printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); | |
242 | ||
243 | ixp2000_reg_write(IXP2000_T4_CLR, 0); | |
244 | ixp2000_reg_write(IXP2000_T4_CLD, -1); | |
e9b72e43 | 245 | ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7)); |
e4fe1981 LB |
246 | missing_jiffy_timer_csr = IXP2000_T4_CSR; |
247 | } else { | |
248 | ixp2000_reg_write(IXP2000_T2_CLR, 0); | |
249 | ixp2000_reg_write(IXP2000_T2_CLD, -1); | |
e9b72e43 | 250 | ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7)); |
e4fe1981 LB |
251 | missing_jiffy_timer_csr = IXP2000_T2_CSR; |
252 | } | |
1da177e4 LT |
253 | next_jiffy_time = 0xffffffff; |
254 | ||
255 | /* register for interrupt */ | |
256 | setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq); | |
257 | } | |
258 | ||
259 | /************************************************************************* | |
260 | * GPIO helpers | |
261 | *************************************************************************/ | |
1da177e4 | 262 | static unsigned long GPIO_IRQ_falling_edge; |
c4982887 | 263 | static unsigned long GPIO_IRQ_rising_edge; |
1da177e4 LT |
264 | static unsigned long GPIO_IRQ_level_low; |
265 | static unsigned long GPIO_IRQ_level_high; | |
266 | ||
c4982887 LB |
267 | static void update_gpio_int_csrs(void) |
268 | { | |
269 | ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); | |
270 | ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); | |
271 | ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); | |
e9b72e43 | 272 | ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); |
c4982887 LB |
273 | } |
274 | ||
275 | void gpio_line_config(int line, int direction) | |
1da177e4 LT |
276 | { |
277 | unsigned long flags; | |
278 | ||
279 | local_irq_save(flags); | |
c4982887 | 280 | if (direction == GPIO_OUT) { |
1da177e4 | 281 | /* if it's an output, it ain't an interrupt anymore */ |
1da177e4 LT |
282 | GPIO_IRQ_falling_edge &= ~(1 << line); |
283 | GPIO_IRQ_rising_edge &= ~(1 << line); | |
284 | GPIO_IRQ_level_low &= ~(1 << line); | |
285 | GPIO_IRQ_level_high &= ~(1 << line); | |
c4982887 LB |
286 | update_gpio_int_csrs(); |
287 | ||
e9b72e43 | 288 | ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line); |
c4982887 | 289 | } else if (direction == GPIO_IN) { |
e9b72e43 | 290 | ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line); |
1da177e4 | 291 | } |
1da177e4 | 292 | local_irq_restore(flags); |
c4982887 | 293 | } |
fc8ea7a1 | 294 | EXPORT_SYMBOL(gpio_line_config); |
1da177e4 LT |
295 | |
296 | ||
297 | /************************************************************************* | |
298 | * IRQ handling IXP2000 | |
299 | *************************************************************************/ | |
10dd5ce2 | 300 | static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc) |
1da177e4 LT |
301 | { |
302 | int i; | |
303 | unsigned long status = *IXP2000_GPIO_INST; | |
304 | ||
305 | for (i = 0; i <= 7; i++) { | |
306 | if (status & (1<<i)) { | |
d8aa0251 | 307 | generic_handle_irq(i + IRQ_IXP2000_GPIO0); |
1da177e4 LT |
308 | } |
309 | } | |
310 | } | |
311 | ||
c4982887 LB |
312 | static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) |
313 | { | |
314 | int line = irq - IRQ_IXP2000_GPIO0; | |
315 | ||
316 | /* | |
317 | * First, configure this GPIO line as an input. | |
318 | */ | |
319 | ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); | |
320 | ||
321 | /* | |
322 | * Then, set the proper trigger type. | |
323 | */ | |
6cab4860 | 324 | if (type & IRQ_TYPE_EDGE_FALLING) |
c4982887 LB |
325 | GPIO_IRQ_falling_edge |= 1 << line; |
326 | else | |
327 | GPIO_IRQ_falling_edge &= ~(1 << line); | |
6cab4860 | 328 | if (type & IRQ_TYPE_EDGE_RISING) |
c4982887 LB |
329 | GPIO_IRQ_rising_edge |= 1 << line; |
330 | else | |
331 | GPIO_IRQ_rising_edge &= ~(1 << line); | |
6cab4860 | 332 | if (type & IRQ_TYPE_LEVEL_LOW) |
c4982887 LB |
333 | GPIO_IRQ_level_low |= 1 << line; |
334 | else | |
335 | GPIO_IRQ_level_low &= ~(1 << line); | |
6cab4860 | 336 | if (type & IRQ_TYPE_LEVEL_HIGH) |
c4982887 LB |
337 | GPIO_IRQ_level_high |= 1 << line; |
338 | else | |
339 | GPIO_IRQ_level_high &= ~(1 << line); | |
340 | update_gpio_int_csrs(); | |
341 | ||
c4982887 LB |
342 | return 0; |
343 | } | |
344 | ||
1da177e4 LT |
345 | static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) |
346 | { | |
347 | ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); | |
c4982887 LB |
348 | |
349 | ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); | |
350 | ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); | |
e9b72e43 | 351 | ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); |
1da177e4 LT |
352 | } |
353 | ||
354 | static void ixp2000_GPIO_irq_mask(unsigned int irq) | |
355 | { | |
e9b72e43 | 356 | ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); |
1da177e4 LT |
357 | } |
358 | ||
359 | static void ixp2000_GPIO_irq_unmask(unsigned int irq) | |
360 | { | |
361 | ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0))); | |
362 | } | |
363 | ||
10dd5ce2 | 364 | static struct irq_chip ixp2000_GPIO_irq_chip = { |
7801907b RK |
365 | .ack = ixp2000_GPIO_irq_mask_ack, |
366 | .mask = ixp2000_GPIO_irq_mask, | |
2be863c9 | 367 | .unmask = ixp2000_GPIO_irq_unmask, |
7801907b | 368 | .set_type = ixp2000_GPIO_irq_type, |
1da177e4 LT |
369 | }; |
370 | ||
371 | static void ixp2000_pci_irq_mask(unsigned int irq) | |
372 | { | |
373 | unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; | |
374 | if (irq == IRQ_IXP2000_PCIA) | |
e9b72e43 | 375 | ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); |
1da177e4 | 376 | else if (irq == IRQ_IXP2000_PCIB) |
e9b72e43 | 377 | ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); |
1da177e4 LT |
378 | } |
379 | ||
380 | static void ixp2000_pci_irq_unmask(unsigned int irq) | |
381 | { | |
382 | unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; | |
383 | if (irq == IRQ_IXP2000_PCIA) | |
384 | ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26))); | |
385 | else if (irq == IRQ_IXP2000_PCIB) | |
386 | ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); | |
387 | } | |
388 | ||
7866f649 DJ |
389 | /* |
390 | * Error interrupts. These are used extensively by the microengine drivers | |
391 | */ | |
10dd5ce2 | 392 | static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc) |
7866f649 DJ |
393 | { |
394 | int i; | |
395 | unsigned long status = *IXP2000_IRQ_ERR_STATUS; | |
396 | ||
397 | for(i = 31; i >= 0; i--) { | |
398 | if(status & (1 << i)) { | |
d8aa0251 | 399 | generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i); |
7866f649 DJ |
400 | } |
401 | } | |
402 | } | |
403 | ||
404 | static void ixp2000_err_irq_mask(unsigned int irq) | |
405 | { | |
406 | ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR, | |
407 | (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); | |
408 | } | |
409 | ||
410 | static void ixp2000_err_irq_unmask(unsigned int irq) | |
411 | { | |
412 | ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET, | |
413 | (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); | |
414 | } | |
415 | ||
10dd5ce2 | 416 | static struct irq_chip ixp2000_err_irq_chip = { |
7866f649 DJ |
417 | .ack = ixp2000_err_irq_mask, |
418 | .mask = ixp2000_err_irq_mask, | |
419 | .unmask = ixp2000_err_irq_unmask | |
420 | }; | |
421 | ||
10dd5ce2 | 422 | static struct irq_chip ixp2000_pci_irq_chip = { |
1da177e4 LT |
423 | .ack = ixp2000_pci_irq_mask, |
424 | .mask = ixp2000_pci_irq_mask, | |
425 | .unmask = ixp2000_pci_irq_unmask | |
426 | }; | |
427 | ||
428 | static void ixp2000_irq_mask(unsigned int irq) | |
429 | { | |
e9b72e43 | 430 | ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); |
1da177e4 LT |
431 | } |
432 | ||
433 | static void ixp2000_irq_unmask(unsigned int irq) | |
434 | { | |
c4982887 | 435 | ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); |
1da177e4 LT |
436 | } |
437 | ||
10dd5ce2 | 438 | static struct irq_chip ixp2000_irq_chip = { |
1da177e4 LT |
439 | .ack = ixp2000_irq_mask, |
440 | .mask = ixp2000_irq_mask, | |
441 | .unmask = ixp2000_irq_unmask | |
442 | }; | |
443 | ||
444 | void __init ixp2000_init_irq(void) | |
445 | { | |
446 | int irq; | |
447 | ||
448 | /* | |
449 | * Mask all sources | |
450 | */ | |
451 | ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff); | |
452 | ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff); | |
453 | ||
454 | /* clear all GPIO edge/level detects */ | |
455 | ixp2000_reg_write(IXP2000_GPIO_REDR, 0); | |
456 | ixp2000_reg_write(IXP2000_GPIO_FEDR, 0); | |
457 | ixp2000_reg_write(IXP2000_GPIO_LSHR, 0); | |
458 | ixp2000_reg_write(IXP2000_GPIO_LSLR, 0); | |
459 | ixp2000_reg_write(IXP2000_GPIO_INCR, -1); | |
460 | ||
461 | /* clear PCI interrupt sources */ | |
e9b72e43 | 462 | ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0); |
1da177e4 LT |
463 | |
464 | /* | |
465 | * Certain bits in the IRQ status register of the | |
466 | * IXP2000 are reserved. Instead of trying to map | |
467 | * things non 1:1 from bit position to IRQ number, | |
468 | * we mark the reserved IRQs as invalid. This makes | |
469 | * our mask/unmask code much simpler. | |
470 | */ | |
471 | for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { | |
c4982887 | 472 | if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { |
1da177e4 | 473 | set_irq_chip(irq, &ixp2000_irq_chip); |
10dd5ce2 | 474 | set_irq_handler(irq, handle_level_irq); |
1da177e4 LT |
475 | set_irq_flags(irq, IRQF_VALID); |
476 | } else set_irq_flags(irq, 0); | |
477 | } | |
c4982887 | 478 | |
7866f649 DJ |
479 | for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { |
480 | if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & | |
481 | IXP2000_VALID_ERR_IRQ_MASK) { | |
482 | set_irq_chip(irq, &ixp2000_err_irq_chip); | |
10dd5ce2 | 483 | set_irq_handler(irq, handle_level_irq); |
7866f649 DJ |
484 | set_irq_flags(irq, IRQF_VALID); |
485 | } | |
486 | else | |
487 | set_irq_flags(irq, 0); | |
488 | } | |
489 | set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); | |
490 | ||
1da177e4 LT |
491 | for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { |
492 | set_irq_chip(irq, &ixp2000_GPIO_irq_chip); | |
10dd5ce2 | 493 | set_irq_handler(irq, handle_level_irq); |
bd115ea0 | 494 | set_irq_flags(irq, IRQF_VALID); |
1da177e4 LT |
495 | } |
496 | set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); | |
497 | ||
498 | /* | |
499 | * Enable PCI irqs. The actual PCI[AB] decoding is done in | |
500 | * entry-macro.S, so we don't need a chained handler for the | |
501 | * PCI interrupt source. | |
502 | */ | |
503 | ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI)); | |
504 | for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) { | |
505 | set_irq_chip(irq, &ixp2000_pci_irq_chip); | |
10dd5ce2 | 506 | set_irq_handler(irq, handle_level_irq); |
1da177e4 LT |
507 | set_irq_flags(irq, IRQF_VALID); |
508 | } | |
509 | } | |
510 |