]>
Commit | Line | Data |
---|---|---|
65b1aa13 DM |
1 | /* |
2 | * LILLY-1131 module support | |
3 | * | |
4 | * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> | |
5 | * | |
6 | * based on code for other MX31 boards, | |
7 | * | |
8 | * Copyright 2005-2007 Freescale Semiconductor | |
9 | * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> | |
10 | * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2 of the License, or | |
15 | * (at your option) any later version. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
65b1aa13 DM |
21 | */ |
22 | ||
23 | #include <linux/types.h> | |
24 | #include <linux/init.h> | |
25 | #include <linux/clk.h> | |
066fb847 | 26 | #include <linux/gpio.h> |
4bd597b6 | 27 | #include <linux/delay.h> |
cbaa6ca1 DM |
28 | #include <linux/platform_device.h> |
29 | #include <linux/interrupt.h> | |
30 | #include <linux/smsc911x.h> | |
38160e0b | 31 | #include <linux/mtd/physmap.h> |
2cc32683 DM |
32 | #include <linux/spi/spi.h> |
33 | #include <linux/mfd/mc13783.h> | |
066fb847 DM |
34 | #include <linux/usb/otg.h> |
35 | #include <linux/usb/ulpi.h> | |
65b1aa13 DM |
36 | |
37 | #include <asm/mach-types.h> | |
38 | #include <asm/mach/arch.h> | |
39 | #include <asm/mach/time.h> | |
40 | #include <asm/mach/map.h> | |
41 | ||
42 | #include <mach/hardware.h> | |
43 | #include <mach/common.h> | |
44 | #include <mach/iomux-mx3.h> | |
45 | #include <mach/board-mx31lilly.h> | |
066fb847 | 46 | #include <mach/ulpi.h> |
65b1aa13 | 47 | |
06606ff1 | 48 | #include "devices-imx31.h" |
65b1aa13 DM |
49 | #include "devices.h" |
50 | ||
51 | /* | |
52 | * This file contains module-specific initialization routines for LILLY-1131. | |
53 | * Initialization of peripherals found on the baseboard is implemented in the | |
54 | * appropriate baseboard support code. | |
55 | */ | |
56 | ||
cbaa6ca1 DM |
57 | /* SMSC ethernet support */ |
58 | ||
59 | static struct resource smsc91x_resources[] = { | |
60 | { | |
f568dd7f UKK |
61 | .start = MX31_CS4_BASE_ADDR, |
62 | .end = MX31_CS4_BASE_ADDR + 0xffff, | |
cbaa6ca1 DM |
63 | .flags = IORESOURCE_MEM, |
64 | }, | |
65 | { | |
66 | .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), | |
67 | .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), | |
68 | .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, | |
69 | } | |
70 | }; | |
71 | ||
72 | static struct smsc911x_platform_config smsc911x_config = { | |
73 | .phy_interface = PHY_INTERFACE_MODE_MII, | |
74 | .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | |
75 | .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, | |
76 | .flags = SMSC911X_USE_32BIT | | |
77 | SMSC911X_SAVE_MAC_ADDRESS | | |
78 | SMSC911X_FORCE_INTERNAL_PHY, | |
79 | }; | |
80 | ||
81 | static struct platform_device smsc91x_device = { | |
82 | .name = "smsc911x", | |
83 | .id = -1, | |
84 | .num_resources = ARRAY_SIZE(smsc91x_resources), | |
85 | .resource = smsc91x_resources, | |
86 | .dev = { | |
87 | .platform_data = &smsc911x_config, | |
88 | } | |
89 | }; | |
90 | ||
38160e0b DM |
91 | /* NOR flash */ |
92 | static struct physmap_flash_data nor_flash_data = { | |
93 | .width = 2, | |
94 | }; | |
95 | ||
96 | static struct resource nor_flash_resource = { | |
97 | .start = 0xa0000000, | |
98 | .end = 0xa1ffffff, | |
99 | .flags = IORESOURCE_MEM, | |
100 | }; | |
101 | ||
102 | static struct platform_device physmap_flash_device = { | |
103 | .name = "physmap-flash", | |
104 | .id = 0, | |
105 | .dev = { | |
106 | .platform_data = &nor_flash_data, | |
107 | }, | |
108 | .resource = &nor_flash_resource, | |
109 | .num_resources = 1, | |
110 | }; | |
111 | ||
066fb847 DM |
112 | /* USB */ |
113 | ||
4d5d8590 DM |
114 | #if defined(CONFIG_USB_ULPI) |
115 | ||
066fb847 DM |
116 | #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ |
117 | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) | |
118 | ||
066fb847 DM |
119 | static int usbh1_init(struct platform_device *pdev) |
120 | { | |
121 | int pins[] = { | |
122 | MX31_PIN_CSPI1_MOSI__USBH1_RXDM, | |
123 | MX31_PIN_CSPI1_MISO__USBH1_RXDP, | |
124 | MX31_PIN_CSPI1_SS0__USBH1_TXDM, | |
125 | MX31_PIN_CSPI1_SS1__USBH1_TXDP, | |
126 | MX31_PIN_CSPI1_SS2__USBH1_RCV, | |
127 | MX31_PIN_CSPI1_SCLK__USBH1_OEB, | |
128 | MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, | |
129 | }; | |
130 | ||
131 | mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1"); | |
132 | ||
133 | mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); | |
134 | mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); | |
135 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); | |
136 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); | |
137 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); | |
138 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); | |
139 | mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); | |
140 | ||
141 | mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); | |
142 | ||
4bd597b6 SH |
143 | mdelay(10); |
144 | ||
145 | return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | | |
146 | MXC_EHCI_INTERFACE_SINGLE_UNI); | |
066fb847 DM |
147 | } |
148 | ||
149 | static int usbh2_init(struct platform_device *pdev) | |
150 | { | |
151 | int pins[] = { | |
152 | MX31_PIN_USBH2_DATA0__USBH2_DATA0, | |
153 | MX31_PIN_USBH2_DATA1__USBH2_DATA1, | |
154 | MX31_PIN_USBH2_CLK__USBH2_CLK, | |
155 | MX31_PIN_USBH2_DIR__USBH2_DIR, | |
156 | MX31_PIN_USBH2_NXT__USBH2_NXT, | |
157 | MX31_PIN_USBH2_STP__USBH2_STP, | |
158 | }; | |
159 | ||
160 | mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); | |
161 | ||
162 | mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); | |
163 | mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); | |
164 | mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); | |
165 | mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); | |
166 | mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); | |
167 | mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); | |
168 | mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); | |
169 | mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); | |
170 | mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); | |
171 | mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); | |
172 | mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); | |
173 | mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); | |
174 | ||
175 | mxc_iomux_set_gpr(MUX_PGP_UH2, true); | |
176 | ||
177 | /* chip select */ | |
178 | mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), | |
179 | "USBH2_CS"); | |
180 | gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); | |
181 | gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); | |
182 | ||
4bd597b6 SH |
183 | mdelay(10); |
184 | ||
185 | return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); | |
066fb847 DM |
186 | } |
187 | ||
2d58de28 | 188 | static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { |
066fb847 DM |
189 | .init = usbh1_init, |
190 | .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, | |
066fb847 DM |
191 | }; |
192 | ||
2d58de28 | 193 | static struct mxc_usbh_platform_data usbh2_pdata __initdata = { |
066fb847 DM |
194 | .init = usbh2_init, |
195 | .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, | |
066fb847 DM |
196 | }; |
197 | ||
4d5d8590 DM |
198 | static void lilly1131_usb_init(void) |
199 | { | |
4d5d8590 | 200 | usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, |
13dd0c97 | 201 | ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); |
4d5d8590 | 202 | |
2d58de28 UKK |
203 | imx31_add_mxc_ehci_hs(1, &usbh1_pdata); |
204 | imx31_add_mxc_ehci_hs(2, &usbh2_pdata); | |
4d5d8590 DM |
205 | } |
206 | ||
207 | #else | |
208 | static inline void lilly1131_usb_init(void) {} | |
209 | #endif /* CONFIG_USB_ULPI */ | |
cbaa6ca1 | 210 | |
2cc32683 DM |
211 | /* SPI */ |
212 | ||
3ea2e1a4 DM |
213 | static int spi_internal_chipselect[] = { |
214 | MXC_SPI_CS(0), | |
215 | MXC_SPI_CS(1), | |
216 | MXC_SPI_CS(2), | |
217 | }; | |
218 | ||
06606ff1 | 219 | static const struct spi_imx_master spi0_pdata __initconst = { |
3ea2e1a4 DM |
220 | .chipselect = spi_internal_chipselect, |
221 | .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), | |
222 | }; | |
223 | ||
06606ff1 | 224 | static const struct spi_imx_master spi1_pdata __initconst = { |
3ea2e1a4 DM |
225 | .chipselect = spi_internal_chipselect, |
226 | .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), | |
227 | }; | |
228 | ||
5836372e DJ |
229 | static struct mc13xxx_platform_data mc13783_pdata __initdata = { |
230 | .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, | |
2cc32683 DM |
231 | }; |
232 | ||
233 | static struct spi_board_info mc13783_dev __initdata = { | |
234 | .modalias = "mc13783", | |
235 | .max_speed_hz = 1000000, | |
236 | .bus_num = 1, | |
237 | .chip_select = 0, | |
238 | .platform_data = &mc13783_pdata, | |
21b07344 | 239 | .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), |
2cc32683 DM |
240 | }; |
241 | ||
4d5d8590 DM |
242 | static struct platform_device *devices[] __initdata = { |
243 | &smsc91x_device, | |
244 | &physmap_flash_device, | |
245 | }; | |
246 | ||
65b1aa13 DM |
247 | static int mx31lilly_baseboard; |
248 | core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); | |
249 | ||
250 | static void __init mx31lilly_board_init(void) | |
251 | { | |
252 | switch (mx31lilly_baseboard) { | |
253 | case MX31LILLY_NOBOARD: | |
254 | break; | |
1bc34f79 DM |
255 | case MX31LILLY_DB: |
256 | mx31lilly_db_init(); | |
257 | break; | |
65b1aa13 DM |
258 | default: |
259 | printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", | |
260 | mx31lilly_baseboard); | |
261 | } | |
cbaa6ca1 DM |
262 | |
263 | mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); | |
264 | ||
3ea2e1a4 DM |
265 | /* SPI */ |
266 | mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK"); | |
267 | mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX"); | |
268 | mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX"); | |
269 | mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY"); | |
270 | mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0"); | |
271 | mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1"); | |
272 | mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2"); | |
273 | ||
274 | mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK"); | |
275 | mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX"); | |
276 | mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX"); | |
277 | mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY"); | |
278 | mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0"); | |
279 | mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); | |
280 | mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); | |
281 | ||
06606ff1 UKK |
282 | imx31_add_spi_imx0(&spi0_pdata); |
283 | imx31_add_spi_imx1(&spi1_pdata); | |
2cc32683 | 284 | spi_register_board_info(&mc13783_dev, 1); |
3ea2e1a4 | 285 | |
cbaa6ca1 | 286 | platform_add_devices(devices, ARRAY_SIZE(devices)); |
066fb847 DM |
287 | |
288 | /* USB */ | |
4d5d8590 | 289 | lilly1131_usb_init(); |
65b1aa13 DM |
290 | } |
291 | ||
292 | static void __init mx31lilly_timer_init(void) | |
293 | { | |
294 | mx31_clocks_init(26000000); | |
295 | } | |
296 | ||
297 | static struct sys_timer mx31lilly_timer = { | |
298 | .init = mx31lilly_timer_init, | |
299 | }; | |
300 | ||
301 | MACHINE_START(LILLY1131, "INCO startec LILLY-1131") | |
97976e22 UKK |
302 | .boot_params = MX3x_PHYS_OFFSET + 0x100, |
303 | .map_io = mx31_map_io, | |
304 | .init_early = imx31_init_early, | |
305 | .init_irq = mx31_init_irq, | |
306 | .timer = &mx31lilly_timer, | |
307 | .init_machine = mx31lilly_board_init, | |
65b1aa13 | 308 | MACHINE_END |