[mirror_ubuntu-bionic-kernel.git] / arch / arm / mach-mx3 / mx31lilly.c

/*
 *  LILLY-1131 module support
 *
 *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
 *
 *  based on code for other MX31 boards,
 *
 *    Copyright 2005-2007 Freescale Semiconductor
 *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
 *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
#include <linux/mtd/physmap.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>

#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
#include <mach/spi.h>

#include "devices.h"

/*
 * This file contains module-specific initialization routines for LILLY-1131.
 * Initialization of peripherals found on the baseboard is implemented in the
 * appropriate baseboard support code.
 */

/* SMSC ethernet support */

static struct resource smsc91x_resources[] = {
	{
		.start	= CS4_BASE_ADDR,
		.end	= CS4_BASE_ADDR + 0xffff,
		.flags	= IORESOURCE_MEM,
	},
	{
		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
	}
};

static struct smsc911x_platform_config smsc911x_config = {
	.phy_interface	= PHY_INTERFACE_MODE_MII,
	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
	.flags		= SMSC911X_USE_32BIT |
			  SMSC911X_SAVE_MAC_ADDRESS |
			  SMSC911X_FORCE_INTERNAL_PHY,
};

static struct platform_device smsc91x_device = {
	.name		= "smsc911x",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(smsc91x_resources),
	.resource	= smsc91x_resources,
	.dev		= {
		.platform_data = &smsc911x_config,
	}
};

/* NOR flash */
static struct physmap_flash_data nor_flash_data = {
	.width  = 2,
};

static struct resource nor_flash_resource = {
	.start	= 0xa0000000,
	.end	= 0xa1ffffff,
	.flags	= IORESOURCE_MEM,
};

static struct platform_device physmap_flash_device = {
	.name	= "physmap-flash",
	.id	= 0,
	.dev	= {
		.platform_data  = &nor_flash_data,
	},
	.resource = &nor_flash_resource,
	.num_resources = 1,
};

static struct platform_device *devices[] __initdata = {
	&smsc91x_device,
	&physmap_flash_device,
};

static int spi_internal_chipselect[] = {
	MXC_SPI_CS(0),
	MXC_SPI_CS(1),
	MXC_SPI_CS(2),
};

static struct spi_imx_master spi0_pdata = {
	.chipselect = spi_internal_chipselect,
	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};

static struct spi_imx_master spi1_pdata = {
	.chipselect = spi_internal_chipselect,
	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};

static int mx31lilly_baseboard;
core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);

static void __init mx31lilly_board_init(void)
{
	switch (mx31lilly_baseboard) {
	case MX31LILLY_NOBOARD:
		break;
	case MX31LILLY_DB:
		mx31lilly_db_init();
		break;
	default:
		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
			mx31lilly_baseboard);
	}

	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");

	/* SPI */
	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");

	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");

	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
	mxc_register_device(&mxc_spi_device1, &spi1_pdata);

	platform_add_devices(devices, ARRAY_SIZE(devices));
}

static void __init mx31lilly_timer_init(void)
{
	mx31_clocks_init(26000000);
}

static struct sys_timer mx31lilly_timer = {
	.init	= mx31lilly_timer_init,
};

MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
	.phys_io	= AIPS1_BASE_ADDR,
	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
	.boot_params	= PHYS_OFFSET + 0x100,
	.map_io		= mx31_map_io,
	.init_irq	= mx31_init_irq,
	.init_machine	= mx31lilly_board_init,
	.timer		= &mx31lilly_timer,
MACHINE_END
Commit	Line	Data
65b1aa13 DM	1	/*
	2	* LILLY-1131 module support
	3	*
	4	* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
	5	*
	6	* based on code for other MX31 boards,
	7	*
	8	* Copyright 2005-2007 Freescale Semiconductor
	9	* Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
	10	* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
	11	*
	12	* This program is free software; you can redistribute it and/or modify
	13	* it under the terms of the GNU General Public License as published by
	14	* the Free Software Foundation; either version 2 of the License, or
	15	* (at your option) any later version.
	16	*
	17	* This program is distributed in the hope that it will be useful,
	18	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	19	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	20	* GNU General Public License for more details.
	21	*
	22	* You should have received a copy of the GNU General Public License
	23	* along with this program; if not, write to the Free Software
	24	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	25	*/
	26
	27	#include <linux/types.h>
	28	#include <linux/init.h>
	29	#include <linux/clk.h>
cbaa6ca1 DM	30	#include <linux/platform_device.h>
	31	#include <linux/interrupt.h>
	32	#include <linux/smsc911x.h>
38160e0b	33	#include <linux/mtd/physmap.h>
65b1aa13 DM	34
	35	#include <asm/mach-types.h>
	36	#include <asm/mach/arch.h>
	37	#include <asm/mach/time.h>
	38	#include <asm/mach/map.h>
	39
	40	#include <mach/hardware.h>
	41	#include <mach/common.h>
	42	#include <mach/iomux-mx3.h>
	43	#include <mach/board-mx31lilly.h>
3ea2e1a4	44	#include <mach/spi.h>
65b1aa13 DM	45
	46	#include "devices.h"
	47
	48	/*
	49	* This file contains module-specific initialization routines for LILLY-1131.
	50	* Initialization of peripherals found on the baseboard is implemented in the
	51	* appropriate baseboard support code.
	52	*/
	53
cbaa6ca1 DM	54	/* SMSC ethernet support */
	55
	56	static struct resource smsc91x_resources[] = {
	57	{
	58	.start = CS4_BASE_ADDR,
	59	.end = CS4_BASE_ADDR + 0xffff,
	60	.flags = IORESOURCE_MEM,
	61	},
	62	{
	63	.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
	64	.end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
	65	.flags = IORESOURCE_IRQ \| IRQF_TRIGGER_FALLING,
	66	}
	67	};
	68
	69	static struct smsc911x_platform_config smsc911x_config = {
	70	.phy_interface = PHY_INTERFACE_MODE_MII,
	71	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
	72	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
	73	.flags = SMSC911X_USE_32BIT \|
	74	SMSC911X_SAVE_MAC_ADDRESS \|
	75	SMSC911X_FORCE_INTERNAL_PHY,
	76	};
	77
	78	static struct platform_device smsc91x_device = {
	79	.name = "smsc911x",
	80	.id = -1,
	81	.num_resources = ARRAY_SIZE(smsc91x_resources),
	82	.resource = smsc91x_resources,
	83	.dev = {
	84	.platform_data = &smsc911x_config,
	85	}
	86	};
	87
38160e0b DM	88	/* NOR flash */
	89	static struct physmap_flash_data nor_flash_data = {
	90	.width = 2,
	91	};
	92
	93	static struct resource nor_flash_resource = {
	94	.start = 0xa0000000,
	95	.end = 0xa1ffffff,
	96	.flags = IORESOURCE_MEM,
	97	};
	98
	99	static struct platform_device physmap_flash_device = {
	100	.name = "physmap-flash",
	101	.id = 0,
	102	.dev = {
	103	.platform_data = &nor_flash_data,
	104	},
	105	.resource = &nor_flash_resource,
	106	.num_resources = 1,
	107	};
	108
cbaa6ca1 DM	109	static struct platform_device *devices[] __initdata = {
cbaa6ca1 DM	110	&smsc91x_device,
38160e0b	111	&physmap_flash_device,
cbaa6ca1 DM	112	};
cbaa6ca1 DM	113
3ea2e1a4 DM	114	static int spi_internal_chipselect[] = {
	115	MXC_SPI_CS(0),
	116	MXC_SPI_CS(1),
	117	MXC_SPI_CS(2),
	118	};
	119
	120	static struct spi_imx_master spi0_pdata = {
	121	.chipselect = spi_internal_chipselect,
	122	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
	123	};
	124
	125	static struct spi_imx_master spi1_pdata = {
	126	.chipselect = spi_internal_chipselect,
	127	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
	128	};
	129
65b1aa13 DM	130	static int mx31lilly_baseboard;
	131	core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
	132
	133	static void __init mx31lilly_board_init(void)
	134	{
	135	switch (mx31lilly_baseboard) {
	136	case MX31LILLY_NOBOARD:
	137	break;
1bc34f79 DM	138	case MX31LILLY_DB:
	139	mx31lilly_db_init();
	140	break;
65b1aa13 DM	141	default:
	142	printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
	143	mx31lilly_baseboard);
	144	}
cbaa6ca1 DM	145
	146	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
	147
3ea2e1a4 DM	148	/* SPI */
	149	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
	150	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
	151	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
	152	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
	153	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
	154	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
	155	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
	156
	157	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
	158	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
	159	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
	160	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
	161	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
	162	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
	163	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
	164
	165	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
	166	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
	167
cbaa6ca1	168	platform_add_devices(devices, ARRAY_SIZE(devices));
65b1aa13 DM	169	}
	170
	171	static void __init mx31lilly_timer_init(void)
	172	{
	173	mx31_clocks_init(26000000);
	174	}
	175
	176	static struct sys_timer mx31lilly_timer = {
	177	.init = mx31lilly_timer_init,
	178	};
	179
	180	MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
	181	.phys_io = AIPS1_BASE_ADDR,
	182	.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
	183	.boot_params = PHYS_OFFSET + 0x100,
	184	.map_io = mx31_map_io,
c5aa0ad0	185	.init_irq = mx31_init_irq,
65b1aa13 DM	186	.init_machine = mx31lilly_board_init,
	187	.timer = &mx31lilly_timer,
	188	MACHINE_END
	189