]>
Commit | Line | Data |
---|---|---|
28ad94ec AR |
1 | /* |
2 | * Copyright STMicroelectronics, 2007. | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License as published by | |
6 | * the Free Software Foundation; either version 2 of the License, or | |
7 | * (at your option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software | |
16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
17 | */ | |
18 | ||
19 | #include <linux/types.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/device.h> | |
2ec1d359 | 22 | #include <linux/amba/bus.h> |
3e3c62ca | 23 | #include <linux/platform_device.h> |
35b47a40 | 24 | #include <linux/io.h> |
7c77852d LW |
25 | #include <linux/slab.h> |
26 | #include <linux/irq.h> | |
27 | #include <linux/dma-mapping.h> | |
f8635abd | 28 | #include <linux/irqchip.h> |
4a31bd28 | 29 | #include <linux/platform_data/clk-nomadik.h> |
bb16bd9b | 30 | #include <linux/platform_data/pinctrl-nomadik.h> |
1b542757 | 31 | #include <linux/pinctrl/machine.h> |
f8635abd LW |
32 | #include <linux/platform_data/clocksource-nomadik-mtu.h> |
33 | #include <linux/of_irq.h> | |
2ad6e398 | 34 | #include <linux/of_gpio.h> |
f8635abd LW |
35 | #include <linux/of_address.h> |
36 | #include <linux/of_platform.h> | |
ba785205 | 37 | #include <linux/mtd/fsmc.h> |
2ad6e398 | 38 | #include <linux/gpio.h> |
4fd243c6 | 39 | #include <linux/amba/mmci.h> |
28ad94ec | 40 | |
f8635abd | 41 | #include <asm/mach/arch.h> |
28ad94ec | 42 | #include <asm/mach/map.h> |
f8635abd | 43 | #include <asm/mach/time.h> |
27bda036 | 44 | #include <asm/mach-types.h> |
28ad94ec | 45 | |
0b260fd4 AR |
46 | #include <asm/cacheflush.h> |
47 | #include <asm/hardware/cache-l2x0.h> | |
48 | ||
dea3eacd LW |
49 | /* |
50 | * These are the only hard-coded address offsets we still have to use. | |
51 | */ | |
52 | #define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ | |
53 | #define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ | |
54 | #define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ | |
55 | #define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ | |
56 | #define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ | |
57 | #define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ | |
58 | #define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ | |
59 | #define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ | |
60 | #define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ | |
61 | #define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ | |
62 | #define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ | |
63 | #define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ | |
64 | #define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ | |
65 | #define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ | |
66 | #define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ | |
67 | #define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ | |
68 | #define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ | |
69 | #define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ | |
70 | #define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ | |
71 | #define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ | |
72 | #define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ | |
73 | #define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ | |
74 | #define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ | |
75 | #define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ | |
76 | #define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ | |
77 | #define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ | |
78 | #define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ | |
79 | #define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ | |
80 | #define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ | |
81 | #define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ | |
82 | #define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ | |
83 | #define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ | |
84 | #define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ | |
85 | #define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ | |
86 | #define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ | |
87 | #define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ | |
88 | #define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ | |
89 | #define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ | |
90 | #define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ | |
91 | #define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ | |
92 | #define NOMADIK_UART1_VBASE 0xF01FB000 | |
93 | ||
1b542757 LW |
94 | static unsigned long out_low[] = { PIN_OUTPUT_LOW }; |
95 | static unsigned long out_high[] = { PIN_OUTPUT_HIGH }; | |
96 | static unsigned long in_nopull[] = { PIN_INPUT_NOPULL }; | |
97 | static unsigned long in_pullup[] = { PIN_INPUT_PULLUP }; | |
98 | ||
99 | static struct pinctrl_map __initdata nhk8815_pinmap[] = { | |
100 | PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"), | |
101 | PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"), | |
102 | /* Hog in MMC/SD card mux */ | |
103 | PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"), | |
104 | /* MCCLK */ | |
105 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low), | |
106 | /* MCCMD */ | |
107 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup), | |
108 | /* MCCMDDIR */ | |
109 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high), | |
110 | /* MCDAT3-0 */ | |
111 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup), | |
112 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup), | |
113 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup), | |
114 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup), | |
115 | /* MCDAT0DIR */ | |
116 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high), | |
117 | /* MCDAT31DIR */ | |
118 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high), | |
119 | /* MCMSFBCLK */ | |
120 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup), | |
121 | /* CD input GPIO */ | |
122 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), | |
123 | /* CD bias drive */ | |
124 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), | |
125 | /* I2C0 */ | |
126 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup), | |
127 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup), | |
128 | /* I2C1 */ | |
129 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup), | |
130 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup), | |
131 | /* I2C2 */ | |
132 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup), | |
133 | PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup), | |
134 | }; | |
135 | ||
dea3eacd LW |
136 | /* This is needed for LL-debug/earlyprintk/debug-macro.S */ |
137 | static struct map_desc cpu8815_io_desc[] __initdata = { | |
28ad94ec | 138 | { |
dea3eacd LW |
139 | .virtual = NOMADIK_UART1_VBASE, |
140 | .pfn = __phys_to_pfn(NOMADIK_UART1_BASE), | |
141 | .length = SZ_4K, | |
142 | .type = MT_DEVICE, | |
143 | }, | |
28ad94ec AR |
144 | }; |
145 | ||
5f66d482 | 146 | static void __init cpu8815_map_io(void) |
28ad94ec | 147 | { |
dea3eacd | 148 | iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc)); |
28ad94ec AR |
149 | } |
150 | ||
5f66d482 | 151 | static void cpu8815_restart(char mode, const char *cmd) |
35b47a40 | 152 | { |
dea3eacd | 153 | void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K); |
35b47a40 RK |
154 | |
155 | /* FIXME: use egpio when implemented */ | |
156 | ||
157 | /* Write anything to Reset status register */ | |
dea3eacd | 158 | writel(1, srcbase + 0x18); |
35b47a40 | 159 | } |
f8635abd | 160 | |
f8635abd LW |
161 | /* Initial value for SRC control register: all timers use MXTAL/8 source */ |
162 | #define SRC_CR_INIT_MASK 0x00007fff | |
163 | #define SRC_CR_INIT_VAL 0x2aaa8000 | |
164 | ||
165 | static void __init cpu8815_timer_init_of(void) | |
166 | { | |
167 | struct device_node *mtu; | |
168 | void __iomem *base; | |
169 | int irq; | |
170 | u32 src_cr; | |
171 | ||
172 | /* We need this to be up now */ | |
173 | nomadik_clk_init(); | |
174 | ||
175 | mtu = of_find_node_by_path("/mtu0"); | |
176 | if (!mtu) | |
177 | return; | |
178 | base = of_iomap(mtu, 0); | |
179 | if (WARN_ON(!base)) | |
180 | return; | |
181 | irq = irq_of_parse_and_map(mtu, 0); | |
182 | ||
183 | pr_info("Remapped MTU @ %p, irq: %d\n", base, irq); | |
184 | ||
185 | /* Configure timer sources in "system reset controller" ctrl reg */ | |
186 | src_cr = readl(base); | |
187 | src_cr &= SRC_CR_INIT_MASK; | |
188 | src_cr |= SRC_CR_INIT_VAL; | |
189 | writel(src_cr, base); | |
190 | ||
191 | nmdk_timer_init(base, irq); | |
192 | } | |
193 | ||
ba785205 LW |
194 | static struct fsmc_nand_timings cpu8815_nand_timings = { |
195 | .thiz = 0, | |
196 | .thold = 0x10, | |
197 | .twait = 0x0A, | |
198 | .tset = 0, | |
199 | }; | |
200 | ||
201 | static struct fsmc_nand_platform_data cpu8815_nand_data = { | |
202 | .nand_timings = &cpu8815_nand_timings, | |
203 | }; | |
204 | ||
2ad6e398 LW |
205 | /* |
206 | * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects | |
207 | * to simply request an IRQ passed as a resource. So the GPIO pin needs | |
208 | * to be requested by this hog and set as input. | |
209 | */ | |
210 | static int __init cpu8815_eth_init(void) | |
211 | { | |
212 | struct device_node *eth; | |
213 | int gpio, irq, err; | |
214 | ||
215 | eth = of_find_node_by_path("/usb-s8815/ethernet-gpio"); | |
216 | if (!eth) { | |
217 | pr_info("could not find any ethernet GPIO\n"); | |
218 | return 0; | |
219 | } | |
220 | gpio = of_get_gpio(eth, 0); | |
221 | err = gpio_request(gpio, "eth_irq"); | |
222 | if (err) { | |
223 | pr_info("failed to request ethernet GPIO\n"); | |
224 | return -ENODEV; | |
225 | } | |
226 | err = gpio_direction_input(gpio); | |
227 | if (err) { | |
228 | pr_info("failed to set ethernet GPIO as input\n"); | |
229 | return -ENODEV; | |
230 | } | |
231 | irq = gpio_to_irq(gpio); | |
232 | pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq); | |
233 | return 0; | |
234 | } | |
235 | device_initcall(cpu8815_eth_init); | |
236 | ||
4fd243c6 LW |
237 | /* |
238 | * TODO: | |
239 | * cannot be set from device tree, convert to a proper DT | |
240 | * binding. | |
241 | */ | |
242 | static struct mmci_platform_data mmcsd_plat_data = { | |
243 | .ocr_mask = MMC_VDD_29_30, | |
244 | }; | |
245 | ||
246 | /* | |
247 | * This GPIO pin turns on a line that is used to detect card insertion | |
248 | * on this board. | |
249 | */ | |
250 | static int __init cpu8815_mmcsd_init(void) | |
251 | { | |
252 | struct device_node *cdbias; | |
253 | int gpio, err; | |
254 | ||
255 | cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio"); | |
256 | if (!cdbias) { | |
257 | pr_info("could not find MMC/SD card detect bias node\n"); | |
258 | return 0; | |
259 | } | |
260 | gpio = of_get_gpio(cdbias, 0); | |
261 | if (gpio < 0) { | |
262 | pr_info("could not obtain MMC/SD card detect bias GPIO\n"); | |
263 | return 0; | |
264 | } | |
265 | err = gpio_request(gpio, "card detect bias"); | |
266 | if (err) { | |
267 | pr_info("failed to request card detect bias GPIO %d\n", gpio); | |
268 | return -ENODEV; | |
269 | } | |
270 | err = gpio_direction_output(gpio, 0); | |
271 | if (err){ | |
272 | pr_info("failed to set GPIO %d as output, low\n", gpio); | |
273 | return err; | |
274 | } | |
275 | pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio); | |
276 | return 0; | |
277 | } | |
278 | device_initcall(cpu8815_mmcsd_init); | |
279 | ||
280 | ||
f8635abd LW |
281 | /* These are mostly to get the right device names for the clock lookups */ |
282 | static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { | |
6010d403 LW |
283 | OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE, |
284 | "gpio.0", NULL), | |
285 | OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE, | |
286 | "gpio.1", NULL), | |
287 | OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE, | |
288 | "gpio.2", NULL), | |
289 | OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE, | |
290 | "gpio.3", NULL), | |
291 | OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0, | |
292 | "pinctrl-stn8815", NULL), | |
f8635abd LW |
293 | OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE, |
294 | "uart0", NULL), | |
295 | OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE, | |
296 | "uart1", NULL), | |
27bda036 LW |
297 | OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE, |
298 | "rng", NULL), | |
299 | OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE, | |
300 | "rtc-pl031", NULL), | |
ba785205 LW |
301 | OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, |
302 | "fsmc-nand", &cpu8815_nand_data), | |
4fd243c6 LW |
303 | OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, |
304 | "mmci", &mmcsd_plat_data), | |
f8635abd LW |
305 | { /* sentinel */ }, |
306 | }; | |
307 | ||
308 | static void __init cpu8815_init_of(void) | |
309 | { | |
310 | #ifdef CONFIG_CACHE_L2X0 | |
311 | /* At full speed latency must be >=2, so 0x249 in low bits */ | |
312 | l2x0_of_init(0x00730249, 0xfe000fff); | |
313 | #endif | |
6010d403 | 314 | pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap)); |
f8635abd LW |
315 | of_platform_populate(NULL, of_default_bus_match_table, |
316 | cpu8815_auxdata_lookup, NULL); | |
317 | } | |
318 | ||
319 | static const char * cpu8815_board_compat[] = { | |
320 | "calaosystems,usb-s8815", | |
321 | NULL, | |
322 | }; | |
323 | ||
324 | DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") | |
325 | .map_io = cpu8815_map_io, | |
326 | .init_irq = irqchip_init, | |
327 | .init_time = cpu8815_timer_init_of, | |
328 | .init_machine = cpu8815_init_of, | |
329 | .restart = cpu8815_restart, | |
330 | .dt_compat = cpu8815_board_compat, | |
331 | MACHINE_END |