]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
dbdf9ced | 2 | * linux/arch/arm/mach-omap1/board-osk.c |
1da177e4 LT |
3 | * |
4 | * Board specific init for OMAP5912 OSK | |
5 | * | |
6 | * Written by Dirk Behme <dirk.behme@de.bosch.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify it | |
9 | * under the terms of the GNU General Public License as published by the | |
10 | * Free Software Foundation; either version 2 of the License, or (at your | |
11 | * option) any later version. | |
12 | * | |
13 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
14 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
15 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | |
16 | * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
17 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | |
18 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | |
19 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
20 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
21 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
22 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
23 | * | |
24 | * You should have received a copy of the GNU General Public License along | |
25 | * with this program; if not, write to the Free Software Foundation, Inc., | |
26 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
27 | */ | |
28 | ||
29 | #include <linux/kernel.h> | |
30 | #include <linux/init.h> | |
d052d1be | 31 | #include <linux/platform_device.h> |
a524626b | 32 | #include <linux/interrupt.h> |
d533c128 | 33 | #include <linux/irq.h> |
8056c6cb | 34 | #include <linux/i2c.h> |
d94577d5 | 35 | #include <linux/leds.h> |
7c38cf02 TL |
36 | |
37 | #include <linux/mtd/mtd.h> | |
38 | #include <linux/mtd/partitions.h> | |
1da177e4 | 39 | |
6d16bfb5 DB |
40 | #include <linux/i2c/tps65010.h> |
41 | ||
1da177e4 | 42 | #include <asm/hardware.h> |
8056c6cb DB |
43 | #include <asm/gpio.h> |
44 | ||
1da177e4 LT |
45 | #include <asm/mach-types.h> |
46 | #include <asm/mach/arch.h> | |
47 | #include <asm/mach/map.h> | |
7c38cf02 | 48 | #include <asm/mach/flash.h> |
1da177e4 | 49 | |
1da177e4 LT |
50 | #include <asm/arch/usb.h> |
51 | #include <asm/arch/mux.h> | |
52 | #include <asm/arch/tc.h> | |
d48af15e | 53 | #include <asm/arch/common.h> |
9b6553cd TL |
54 | #include <asm/arch/mcbsp.h> |
55 | #include <asm/arch/omap-alsa.h> | |
56 | ||
7c38cf02 TL |
57 | static struct mtd_partition osk_partitions[] = { |
58 | /* bootloader (U-Boot, etc) in first sector */ | |
59 | { | |
60 | .name = "bootloader", | |
61 | .offset = 0, | |
62 | .size = SZ_128K, | |
63 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
64 | }, | |
65 | /* bootloader params in the next sector */ | |
66 | { | |
67 | .name = "params", | |
68 | .offset = MTDPART_OFS_APPEND, | |
69 | .size = SZ_128K, | |
70 | .mask_flags = 0, | |
71 | }, { | |
72 | .name = "kernel", | |
73 | .offset = MTDPART_OFS_APPEND, | |
74 | .size = SZ_2M, | |
75 | .mask_flags = 0 | |
76 | }, { | |
77 | .name = "filesystem", | |
78 | .offset = MTDPART_OFS_APPEND, | |
79 | .size = MTDPART_SIZ_FULL, | |
80 | .mask_flags = 0 | |
81 | } | |
1da177e4 LT |
82 | }; |
83 | ||
7c38cf02 TL |
84 | static struct flash_platform_data osk_flash_data = { |
85 | .map_name = "cfi_probe", | |
86 | .width = 2, | |
87 | .parts = osk_partitions, | |
88 | .nr_parts = ARRAY_SIZE(osk_partitions), | |
89 | }; | |
90 | ||
91 | static struct resource osk_flash_resource = { | |
92 | /* this is on CS3, wherever it's mapped */ | |
93 | .flags = IORESOURCE_MEM, | |
94 | }; | |
95 | ||
96 | static struct platform_device osk5912_flash_device = { | |
97 | .name = "omapflash", | |
98 | .id = 0, | |
99 | .dev = { | |
100 | .platform_data = &osk_flash_data, | |
101 | }, | |
102 | .num_resources = 1, | |
103 | .resource = &osk_flash_resource, | |
104 | }; | |
1da177e4 LT |
105 | |
106 | static struct resource osk5912_smc91x_resources[] = { | |
107 | [0] = { | |
108 | .start = OMAP_OSK_ETHR_START, /* Physical */ | |
109 | .end = OMAP_OSK_ETHR_START + 0xf, | |
110 | .flags = IORESOURCE_MEM, | |
111 | }, | |
112 | [1] = { | |
113 | .start = OMAP_GPIO_IRQ(0), | |
114 | .end = OMAP_GPIO_IRQ(0), | |
e7b3dc7e | 115 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
1da177e4 LT |
116 | }, |
117 | }; | |
118 | ||
119 | static struct platform_device osk5912_smc91x_device = { | |
120 | .name = "smc91x", | |
121 | .id = -1, | |
122 | .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), | |
123 | .resource = osk5912_smc91x_resources, | |
124 | }; | |
125 | ||
126 | static struct resource osk5912_cf_resources[] = { | |
127 | [0] = { | |
128 | .start = OMAP_GPIO_IRQ(62), | |
129 | .end = OMAP_GPIO_IRQ(62), | |
130 | .flags = IORESOURCE_IRQ, | |
131 | }, | |
132 | }; | |
133 | ||
134 | static struct platform_device osk5912_cf_device = { | |
135 | .name = "omap_cf", | |
136 | .id = -1, | |
137 | .dev = { | |
138 | .platform_data = (void *) 2 /* CS2 */, | |
139 | }, | |
140 | .num_resources = ARRAY_SIZE(osk5912_cf_resources), | |
141 | .resource = osk5912_cf_resources, | |
142 | }; | |
143 | ||
9b6553cd TL |
144 | #define DEFAULT_BITPERSAMPLE 16 |
145 | ||
146 | static struct omap_mcbsp_reg_cfg mcbsp_regs = { | |
147 | .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), | |
148 | .spcr1 = RINTM(3) | RRST, | |
149 | .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | | |
150 | RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), | |
151 | .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), | |
152 | .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | | |
153 | XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, | |
154 | .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), | |
155 | .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), | |
156 | .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), | |
157 | /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ | |
158 | .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ | |
159 | }; | |
160 | ||
161 | static struct omap_alsa_codec_config alsa_config = { | |
162 | .name = "OSK AIC23", | |
163 | .mcbsp_regs_alsa = &mcbsp_regs, | |
6e2d4107 DC |
164 | .codec_configure_dev = NULL, /* aic23_configure, */ |
165 | .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ | |
166 | .codec_clock_setup = NULL, /* aic23_clock_setup, */ | |
167 | .codec_clock_on = NULL, /* aic23_clock_on, */ | |
168 | .codec_clock_off = NULL, /* aic23_clock_off, */ | |
169 | .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ | |
9b6553cd TL |
170 | }; |
171 | ||
7c38cf02 | 172 | static struct platform_device osk5912_mcbsp1_device = { |
9b6553cd | 173 | .name = "omap_alsa_mcbsp", |
78762841 | 174 | .id = 1, |
9b6553cd TL |
175 | .dev = { |
176 | .platform_data = &alsa_config, | |
177 | }, | |
178 | }; | |
179 | ||
1da177e4 | 180 | static struct platform_device *osk5912_devices[] __initdata = { |
7c38cf02 | 181 | &osk5912_flash_device, |
1da177e4 LT |
182 | &osk5912_smc91x_device, |
183 | &osk5912_cf_device, | |
7c38cf02 | 184 | &osk5912_mcbsp1_device, |
1da177e4 LT |
185 | }; |
186 | ||
d94577d5 DB |
187 | static struct gpio_led tps_leds[] = { |
188 | /* NOTE: D9 and D2 have hardware blink support. | |
189 | * Also, D9 requires non-battery power. | |
190 | */ | |
191 | { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", }, | |
192 | { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", }, | |
193 | { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1, | |
194 | .default_trigger = "heartbeat", }, | |
195 | }; | |
196 | ||
197 | static struct gpio_led_platform_data tps_leds_data = { | |
198 | .num_leds = 3, | |
199 | .leds = tps_leds, | |
200 | }; | |
201 | ||
202 | static struct platform_device osk5912_tps_leds = { | |
203 | .name = "leds-gpio", | |
204 | .id = 0, | |
205 | .dev.platform_data = &tps_leds_data, | |
206 | }; | |
207 | ||
208 | static int osk_tps_setup(struct i2c_client *client, void *context) | |
209 | { | |
210 | /* Set GPIO 1 HIGH to disable VBUS power supply; | |
211 | * OHCI driver powers it up/down as needed. | |
212 | */ | |
213 | gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en"); | |
214 | gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1); | |
215 | ||
216 | /* Set GPIO 2 high so LED D3 is off by default */ | |
217 | tps65010_set_gpio_out_value(GPIO2, HIGH); | |
218 | ||
219 | /* Set GPIO 3 low to take ethernet out of reset */ | |
220 | gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset"); | |
221 | gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0); | |
222 | ||
223 | /* GPIO4 is VDD_DSP */ | |
224 | gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power"); | |
225 | gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1); | |
226 | /* REVISIT if DSP support isn't configured, power it off ... */ | |
227 | ||
228 | /* Let LED1 (D9) blink; leds-gpio may override it */ | |
229 | tps65010_set_led(LED1, BLINK); | |
230 | ||
231 | /* Set LED2 off by default */ | |
232 | tps65010_set_led(LED2, OFF); | |
233 | ||
234 | /* Enable LOW_PWR handshake */ | |
235 | tps65010_set_low_pwr(ON); | |
236 | ||
237 | /* Switch VLDO2 to 3.0V for AIC23 */ | |
238 | tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | |
239 | | TPS_LDO1_ENABLE); | |
240 | ||
241 | /* register these three LEDs */ | |
242 | osk5912_tps_leds.dev.parent = &client->dev; | |
243 | platform_device_register(&osk5912_tps_leds); | |
244 | ||
245 | return 0; | |
246 | } | |
247 | ||
248 | static struct tps65010_board tps_board = { | |
249 | .base = OSK_TPS_GPIO_BASE, | |
250 | .outmask = 0x0f, | |
251 | .setup = osk_tps_setup, | |
252 | }; | |
253 | ||
8056c6cb DB |
254 | static struct i2c_board_info __initdata osk_i2c_board_info[] = { |
255 | { | |
256 | I2C_BOARD_INFO("tps65010", 0x48), | |
8056c6cb | 257 | .irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)), |
d94577d5 DB |
258 | .platform_data = &tps_board, |
259 | ||
8056c6cb DB |
260 | }, |
261 | /* TODO when driver support is ready: | |
262 | * - aic23 audio chip at 0x1a | |
263 | * - on Mistral, 24c04 eeprom at 0x50 | |
264 | * - optionally on Mistral, ov9640 camera sensor at 0x30 | |
265 | */ | |
266 | }; | |
267 | ||
1da177e4 LT |
268 | static void __init osk_init_smc91x(void) |
269 | { | |
ac37a0b0 | 270 | if ((gpio_request(0, "smc_irq")) < 0) { |
1da177e4 LT |
271 | printk("Error requesting gpio 0 for smc91x irq\n"); |
272 | return; | |
273 | } | |
1da177e4 LT |
274 | |
275 | /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ | |
3179a019 | 276 | EMIFS_CCS(1) |= 0x3; |
1da177e4 LT |
277 | } |
278 | ||
279 | static void __init osk_init_cf(void) | |
280 | { | |
281 | omap_cfg_reg(M7_1610_GPIO62); | |
ac37a0b0 | 282 | if ((gpio_request(62, "cf_irq")) < 0) { |
1da177e4 LT |
283 | printk("Error requesting gpio 62 for CF irq\n"); |
284 | return; | |
285 | } | |
7c38cf02 TL |
286 | /* the CF I/O IRQ is really active-low */ |
287 | set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); | |
1da177e4 LT |
288 | } |
289 | ||
7c38cf02 | 290 | static void __init osk_init_irq(void) |
1da177e4 | 291 | { |
87bd63f6 | 292 | omap1_init_common_hw(); |
1da177e4 LT |
293 | omap_init_irq(); |
294 | omap_gpio_init(); | |
295 | osk_init_smc91x(); | |
296 | osk_init_cf(); | |
297 | } | |
298 | ||
299 | static struct omap_usb_config osk_usb_config __initdata = { | |
300 | /* has usb host connector (A) ... for development it can also | |
301 | * be used, with a NONSTANDARD gender-bending cable/dongle, as | |
302 | * a peripheral. | |
303 | */ | |
304 | #ifdef CONFIG_USB_GADGET_OMAP | |
305 | .register_dev = 1, | |
306 | .hmc_mode = 0, | |
307 | #else | |
308 | .register_host = 1, | |
309 | .hmc_mode = 16, | |
310 | .rwc = 1, | |
311 | #endif | |
312 | .pins[0] = 2, | |
313 | }; | |
314 | ||
3179a019 TL |
315 | static struct omap_uart_config osk_uart_config __initdata = { |
316 | .enabled_uarts = (1 << 0), | |
317 | }; | |
318 | ||
78762841 | 319 | #ifdef CONFIG_OMAP_OSK_MISTRAL |
3179a019 | 320 | static struct omap_lcd_config osk_lcd_config __initdata = { |
3179a019 TL |
321 | .ctrl_name = "internal", |
322 | }; | |
78762841 | 323 | #endif |
3179a019 | 324 | |
e27a93a9 | 325 | static struct omap_board_config_kernel osk_config[] __initdata = { |
1da177e4 | 326 | { OMAP_TAG_USB, &osk_usb_config }, |
3179a019 | 327 | { OMAP_TAG_UART, &osk_uart_config }, |
78762841 | 328 | #ifdef CONFIG_OMAP_OSK_MISTRAL |
3179a019 | 329 | { OMAP_TAG_LCD, &osk_lcd_config }, |
78762841 | 330 | #endif |
1da177e4 LT |
331 | }; |
332 | ||
7c38cf02 TL |
333 | #ifdef CONFIG_OMAP_OSK_MISTRAL |
334 | ||
78762841 DB |
335 | #include <linux/input.h> |
336 | #include <linux/spi/spi.h> | |
337 | #include <linux/spi/ads7846.h> | |
338 | ||
339 | #include <asm/arch/keypad.h> | |
340 | ||
341 | static const int osk_keymap[] = { | |
342 | /* KEY(col, row, code) */ | |
343 | KEY(0, 0, KEY_F1), /* SW4 */ | |
344 | KEY(0, 3, KEY_UP), /* (sw2/up) */ | |
345 | KEY(1, 1, KEY_LEFTCTRL), /* SW5 */ | |
346 | KEY(1, 2, KEY_LEFT), /* (sw2/left) */ | |
347 | KEY(2, 0, KEY_SPACE), /* SW3 */ | |
348 | KEY(2, 1, KEY_ESC), /* SW6 */ | |
349 | KEY(2, 2, KEY_DOWN), /* (sw2/down) */ | |
350 | KEY(3, 2, KEY_ENTER), /* (sw2/select) */ | |
351 | KEY(3, 3, KEY_RIGHT), /* (sw2/right) */ | |
352 | 0 | |
353 | }; | |
354 | ||
355 | static struct omap_kp_platform_data osk_kp_data = { | |
4d24607b KS |
356 | .rows = 8, |
357 | .cols = 8, | |
358 | .keymap = (int *) osk_keymap, | |
359 | .keymapsize = ARRAY_SIZE(osk_keymap), | |
360 | .delay = 9, | |
78762841 DB |
361 | }; |
362 | ||
363 | static struct resource osk5912_kp_resources[] = { | |
364 | [0] = { | |
365 | .start = INT_KEYBOARD, | |
366 | .end = INT_KEYBOARD, | |
367 | .flags = IORESOURCE_IRQ, | |
368 | }, | |
369 | }; | |
370 | ||
371 | static struct platform_device osk5912_kp_device = { | |
372 | .name = "omap-keypad", | |
373 | .id = -1, | |
374 | .dev = { | |
375 | .platform_data = &osk_kp_data, | |
376 | }, | |
377 | .num_resources = ARRAY_SIZE(osk5912_kp_resources), | |
378 | .resource = osk5912_kp_resources, | |
379 | }; | |
380 | ||
4dcc6d24 DB |
381 | static struct omap_backlight_config mistral_bl_data = { |
382 | .default_intensity = 0xa0, | |
383 | }; | |
384 | ||
385 | static struct platform_device mistral_bl_device = { | |
386 | .name = "omap-bl", | |
387 | .id = -1, | |
388 | .dev = { | |
389 | .platform_data = &mistral_bl_data, | |
390 | }, | |
391 | }; | |
392 | ||
78762841 DB |
393 | static struct platform_device osk5912_lcd_device = { |
394 | .name = "lcd_osk", | |
395 | .id = -1, | |
396 | }; | |
397 | ||
398 | static struct platform_device *mistral_devices[] __initdata = { | |
399 | &osk5912_kp_device, | |
4dcc6d24 | 400 | &mistral_bl_device, |
78762841 DB |
401 | &osk5912_lcd_device, |
402 | }; | |
403 | ||
e8cdf7bd DB |
404 | static int mistral_get_pendown_state(void) |
405 | { | |
ac37a0b0 | 406 | return !gpio_get_value(4); |
e8cdf7bd DB |
407 | } |
408 | ||
78762841 DB |
409 | static const struct ads7846_platform_data mistral_ts_info = { |
410 | .model = 7846, | |
411 | .vref_delay_usecs = 100, /* internal, no capacitor */ | |
412 | .x_plate_ohms = 419, | |
413 | .y_plate_ohms = 486, | |
e8cdf7bd | 414 | .get_pendown_state = mistral_get_pendown_state, |
78762841 DB |
415 | }; |
416 | ||
417 | static struct spi_board_info __initdata mistral_boardinfo[] = { { | |
418 | /* MicroWire (bus 2) CS0 has an ads7846e */ | |
419 | .modalias = "ads7846", | |
420 | .platform_data = &mistral_ts_info, | |
421 | .irq = OMAP_GPIO_IRQ(4), | |
422 | .max_speed_hz = 120000 /* max sample rate at 3V */ | |
423 | * 26 /* command + data + overhead */, | |
424 | .bus_num = 2, | |
425 | .chip_select = 0, | |
426 | } }; | |
427 | ||
7c38cf02 TL |
428 | #ifdef CONFIG_PM |
429 | static irqreturn_t | |
0cd61b68 | 430 | osk_mistral_wake_interrupt(int irq, void *ignored) |
7c38cf02 TL |
431 | { |
432 | return IRQ_HANDLED; | |
433 | } | |
434 | #endif | |
435 | ||
436 | static void __init osk_mistral_init(void) | |
437 | { | |
78762841 | 438 | /* NOTE: we could actually tell if there's a Mistral board |
7c38cf02 | 439 | * attached, e.g. by trying to read something from the ads7846. |
78762841 DB |
440 | * But this arch_init() code is too early for that, since we |
441 | * can't talk to the ads or even the i2c eeprom. | |
7c38cf02 TL |
442 | */ |
443 | ||
c72d8950 DB |
444 | /* parallel camera interface */ |
445 | omap_cfg_reg(J15_1610_CAM_LCLK); | |
446 | omap_cfg_reg(J18_1610_CAM_D7); | |
447 | omap_cfg_reg(J19_1610_CAM_D6); | |
448 | omap_cfg_reg(J14_1610_CAM_D5); | |
449 | omap_cfg_reg(K18_1610_CAM_D4); | |
450 | omap_cfg_reg(K19_1610_CAM_D3); | |
451 | omap_cfg_reg(K15_1610_CAM_D2); | |
452 | omap_cfg_reg(K14_1610_CAM_D1); | |
453 | omap_cfg_reg(L19_1610_CAM_D0); | |
454 | omap_cfg_reg(L18_1610_CAM_VS); | |
455 | omap_cfg_reg(L15_1610_CAM_HS); | |
456 | omap_cfg_reg(M19_1610_CAM_RSTZ); | |
457 | omap_cfg_reg(Y15_1610_CAM_OUTCLK); | |
458 | ||
459 | /* serial camera interface */ | |
460 | omap_cfg_reg(H19_1610_CAM_EXCLK); | |
461 | omap_cfg_reg(W13_1610_CCP_CLKM); | |
462 | omap_cfg_reg(Y12_1610_CCP_CLKP); | |
463 | /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */ | |
6e2d4107 | 464 | /* omap_cfg_reg(Y14_1610_CCP_DATAM); */ |
c72d8950 DB |
465 | omap_cfg_reg(W14_1610_CCP_DATAP); |
466 | ||
467 | /* CAM_PWDN */ | |
ac37a0b0 | 468 | if (gpio_request(11, "cam_pwdn") == 0) { |
c72d8950 | 469 | omap_cfg_reg(N20_1610_GPIO11); |
ac37a0b0 | 470 | gpio_direction_output(11, 0); |
c72d8950 DB |
471 | } else |
472 | pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); | |
473 | ||
474 | ||
6e2d4107 | 475 | /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */ |
ac37a0b0 DB |
476 | gpio_request(6, "ts_busy"); |
477 | gpio_direction_input(6); | |
478 | ||
6e2d4107 | 479 | omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ |
ac37a0b0 DB |
480 | gpio_request(4, "ts_int"); |
481 | gpio_direction_input(4); | |
78762841 | 482 | set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); |
ac37a0b0 | 483 | |
78762841 DB |
484 | spi_register_board_info(mistral_boardinfo, |
485 | ARRAY_SIZE(mistral_boardinfo)); | |
486 | ||
7c38cf02 TL |
487 | /* the sideways button (SW1) is for use as a "wakeup" button */ |
488 | omap_cfg_reg(N15_1610_MPUIO2); | |
ac37a0b0 | 489 | if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) { |
7c38cf02 | 490 | int ret = 0; |
ac37a0b0 DB |
491 | |
492 | gpio_direction_input(OMAP_MPUIO(2)); | |
7c38cf02 TL |
493 | set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); |
494 | #ifdef CONFIG_PM | |
495 | /* share the IRQ in case someone wants to use the | |
496 | * button for more than wakeup from system sleep. | |
497 | */ | |
498 | ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), | |
499 | &osk_mistral_wake_interrupt, | |
52e405ea | 500 | IRQF_SHARED, "mistral_wakeup", |
7c38cf02 TL |
501 | &osk_mistral_wake_interrupt); |
502 | if (ret != 0) { | |
ac37a0b0 | 503 | gpio_free(OMAP_MPUIO(2)); |
7c38cf02 TL |
504 | printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", |
505 | ret); | |
506 | } else | |
507 | enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2))); | |
508 | #endif | |
509 | } else | |
510 | printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); | |
78762841 | 511 | |
4dcc6d24 DB |
512 | /* LCD: backlight, and power; power controls other devices on the |
513 | * board, like the touchscreen, EEPROM, and wakeup (!) switch. | |
514 | */ | |
515 | omap_cfg_reg(PWL); | |
ac37a0b0 DB |
516 | if (gpio_request(2, "lcd_pwr") == 0) |
517 | gpio_direction_output(2, 1); | |
4dcc6d24 | 518 | |
78762841 | 519 | platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices)); |
7c38cf02 TL |
520 | } |
521 | #else | |
522 | static void __init osk_mistral_init(void) { } | |
523 | #endif | |
524 | ||
9b6553cd TL |
525 | #define EMIFS_CS3_VAL (0x88013141) |
526 | ||
1da177e4 LT |
527 | static void __init osk_init(void) |
528 | { | |
9b6553cd TL |
529 | /* Workaround for wrong CS3 (NOR flash) timing |
530 | * There are some U-Boot versions out there which configure | |
531 | * wrong CS3 memory timings. This mainly leads to CRC | |
6cbdc8c5 | 532 | * or similar errors if you use NOR flash (e.g. with JFFS2) |
9b6553cd TL |
533 | */ |
534 | if (EMIFS_CCS(3) != EMIFS_CS3_VAL) | |
535 | EMIFS_CCS(3) = EMIFS_CS3_VAL; | |
536 | ||
7c38cf02 TL |
537 | osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); |
538 | osk_flash_resource.end += SZ_32M - 1; | |
1da177e4 LT |
539 | platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); |
540 | omap_board_config = osk_config; | |
541 | omap_board_config_size = ARRAY_SIZE(osk_config); | |
542 | USB_TRANSCEIVER_CTRL_REG |= (3 << 1); | |
7c38cf02 | 543 | |
8056c6cb DB |
544 | /* irq for tps65010 chip */ |
545 | /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ | |
546 | if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) | |
547 | gpio_direction_input(OMAP_MPUIO(1)); | |
548 | ||
3179a019 | 549 | omap_serial_init(); |
1ed16a86 JN |
550 | omap_register_i2c_bus(1, 400, osk_i2c_board_info, |
551 | ARRAY_SIZE(osk_i2c_board_info)); | |
7c38cf02 | 552 | osk_mistral_init(); |
1da177e4 LT |
553 | } |
554 | ||
555 | static void __init osk_map_io(void) | |
556 | { | |
87bd63f6 | 557 | omap1_map_common_io(); |
1da177e4 LT |
558 | } |
559 | ||
560 | MACHINE_START(OMAP_OSK, "TI-OSK") | |
e9dea0c6 | 561 | /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ |
e9dea0c6 RK |
562 | .phys_io = 0xfff00000, |
563 | .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, | |
564 | .boot_params = 0x10000100, | |
565 | .map_io = osk_map_io, | |
566 | .init_irq = osk_init_irq, | |
567 | .init_machine = osk_init, | |
1da177e4 LT |
568 | .timer = &omap_timer, |
569 | MACHINE_END |