]>
Commit | Line | Data |
---|---|---|
ec70e8af MV |
1 | /* |
2 | * linux/arch/arm/mach-omap1/board-palmz71.c | |
3 | * | |
4 | * Modified from board-generic.c | |
5 | * | |
6 | * Support for the Palm Zire71 PDA. | |
7 | * | |
8 | * Original version : Laurent Gonzalez | |
9 | * | |
10 | * Modified for zire71 : Marek Vasut | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
15 | */ | |
16 | ||
17 | #include <linux/delay.h> | |
18 | #include <linux/kernel.h> | |
19 | #include <linux/init.h> | |
20 | #include <linux/platform_device.h> | |
21 | #include <linux/notifier.h> | |
22 | #include <linux/clk.h> | |
23 | #include <linux/irq.h> | |
24 | #include <linux/input.h> | |
25 | #include <linux/interrupt.h> | |
26 | #include <linux/mtd/mtd.h> | |
27 | #include <linux/mtd/partitions.h> | |
561b036a | 28 | #include <linux/mtd/physmap.h> |
ec70e8af | 29 | |
a09e64fb | 30 | #include <mach/hardware.h> |
ec70e8af MV |
31 | #include <asm/mach-types.h> |
32 | #include <asm/mach/arch.h> | |
33 | #include <asm/mach/map.h> | |
ec70e8af | 34 | |
a09e64fb | 35 | #include <mach/gpio.h> |
561b036a | 36 | #include <plat/flash.h> |
ce491cf8 TL |
37 | #include <plat/mux.h> |
38 | #include <plat/usb.h> | |
39 | #include <plat/dma.h> | |
40 | #include <plat/tc.h> | |
41 | #include <plat/board.h> | |
42 | #include <plat/irda.h> | |
43 | #include <plat/keypad.h> | |
44 | #include <plat/common.h> | |
45 | #include <plat/omap-alsa.h> | |
ec70e8af | 46 | |
ec70e8af MV |
47 | #include <linux/spi/spi.h> |
48 | #include <linux/spi/ads7846.h> | |
49 | ||
b2830810 TL |
50 | #define PALMZ71_USBDETECT_GPIO 0 |
51 | #define PALMZ71_PENIRQ_GPIO 6 | |
52 | #define PALMZ71_MMC_WP_GPIO 8 | |
53 | #define PALMZ71_HDQ_GPIO 11 | |
54 | ||
55 | #define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) | |
56 | #define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) | |
57 | #define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) | |
58 | #define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) | |
59 | ||
ec70e8af MV |
60 | static void __init |
61 | omap_palmz71_init_irq(void) | |
62 | { | |
63 | omap1_init_common_hw(); | |
64 | omap_init_irq(); | |
ec70e8af MV |
65 | } |
66 | ||
da1f026b | 67 | static const unsigned int palmz71_keymap[] = { |
ec70e8af | 68 | KEY(0, 0, KEY_F1), |
da1f026b JK |
69 | KEY(1, 0, KEY_F2), |
70 | KEY(2, 0, KEY_F3), | |
71 | KEY(3, 0, KEY_F4), | |
72 | KEY(4, 0, KEY_POWER), | |
73 | KEY(0, 1, KEY_LEFT), | |
ec70e8af | 74 | KEY(1, 1, KEY_DOWN), |
da1f026b JK |
75 | KEY(2, 1, KEY_UP), |
76 | KEY(3, 1, KEY_RIGHT), | |
77 | KEY(4, 1, KEY_ENTER), | |
78 | KEY(0, 2, KEY_CAMERA), | |
79 | }; | |
80 | ||
81 | static const struct matrix_keymap_data palmz71_keymap_data = { | |
82 | .keymap = palmz71_keymap, | |
83 | .keymap_size = ARRAY_SIZE(palmz71_keymap), | |
ec70e8af MV |
84 | }; |
85 | ||
86 | static struct omap_kp_platform_data palmz71_kp_data = { | |
87 | .rows = 8, | |
88 | .cols = 8, | |
da1f026b JK |
89 | .keymap_data = &palmz71_keymap_data, |
90 | .rep = true, | |
ec70e8af MV |
91 | .delay = 80, |
92 | }; | |
93 | ||
94 | static struct resource palmz71_kp_resources[] = { | |
95 | [0] = { | |
96 | .start = INT_KEYBOARD, | |
97 | .end = INT_KEYBOARD, | |
98 | .flags = IORESOURCE_IRQ, | |
99 | }, | |
100 | }; | |
101 | ||
102 | static struct platform_device palmz71_kp_device = { | |
103 | .name = "omap-keypad", | |
104 | .id = -1, | |
105 | .dev = { | |
106 | .platform_data = &palmz71_kp_data, | |
107 | }, | |
108 | .num_resources = ARRAY_SIZE(palmz71_kp_resources), | |
109 | .resource = palmz71_kp_resources, | |
110 | }; | |
111 | ||
112 | static struct mtd_partition palmz71_rom_partitions[] = { | |
113 | /* PalmOS "Small ROM", contains the bootloader and the debugger */ | |
114 | { | |
115 | .name = "smallrom", | |
116 | .offset = 0, | |
117 | .size = 0xa000, | |
118 | .mask_flags = MTD_WRITEABLE, | |
119 | }, | |
120 | /* PalmOS "Big ROM", a filesystem with all the OS code and data */ | |
121 | { | |
122 | .name = "bigrom", | |
123 | .offset = SZ_128K, | |
124 | /* | |
125 | * 0x5f0000 bytes big in the multi-language ("EFIGS") version, | |
126 | * 0x7b0000 bytes in the English-only ("enUS") version. | |
127 | */ | |
128 | .size = 0x7b0000, | |
129 | .mask_flags = MTD_WRITEABLE, | |
130 | }, | |
131 | }; | |
132 | ||
561b036a | 133 | static struct physmap_flash_data palmz71_rom_data = { |
ec70e8af | 134 | .width = 2, |
561b036a | 135 | .set_vpp = omap1_set_vpp, |
ec70e8af MV |
136 | .parts = palmz71_rom_partitions, |
137 | .nr_parts = ARRAY_SIZE(palmz71_rom_partitions), | |
138 | }; | |
139 | ||
140 | static struct resource palmz71_rom_resource = { | |
141 | .start = OMAP_CS0_PHYS, | |
142 | .end = OMAP_CS0_PHYS + SZ_8M - 1, | |
143 | .flags = IORESOURCE_MEM, | |
144 | }; | |
145 | ||
146 | static struct platform_device palmz71_rom_device = { | |
561b036a | 147 | .name = "physmap-flash", |
ec70e8af MV |
148 | .id = -1, |
149 | .dev = { | |
150 | .platform_data = &palmz71_rom_data, | |
151 | }, | |
152 | .num_resources = 1, | |
153 | .resource = &palmz71_rom_resource, | |
154 | }; | |
155 | ||
156 | static struct platform_device palmz71_lcd_device = { | |
157 | .name = "lcd_palmz71", | |
158 | .id = -1, | |
159 | }; | |
160 | ||
161 | static struct omap_irda_config palmz71_irda_config = { | |
162 | .transceiver_cap = IR_SIRMODE, | |
163 | .rx_channel = OMAP_DMA_UART3_RX, | |
164 | .tx_channel = OMAP_DMA_UART3_TX, | |
165 | .dest_start = UART3_THR, | |
166 | .src_start = UART3_RHR, | |
167 | .tx_trigger = 0, | |
168 | .rx_trigger = 0, | |
169 | }; | |
170 | ||
171 | static struct resource palmz71_irda_resources[] = { | |
172 | [0] = { | |
173 | .start = INT_UART3, | |
174 | .end = INT_UART3, | |
175 | .flags = IORESOURCE_IRQ, | |
176 | }, | |
177 | }; | |
178 | ||
179 | static struct platform_device palmz71_irda_device = { | |
180 | .name = "omapirda", | |
181 | .id = -1, | |
182 | .dev = { | |
183 | .platform_data = &palmz71_irda_config, | |
184 | }, | |
185 | .num_resources = ARRAY_SIZE(palmz71_irda_resources), | |
186 | .resource = palmz71_irda_resources, | |
187 | }; | |
188 | ||
189 | static struct platform_device palmz71_spi_device = { | |
190 | .name = "spi_palmz71", | |
191 | .id = -1, | |
192 | }; | |
193 | ||
ec70e8af MV |
194 | static struct omap_backlight_config palmz71_backlight_config = { |
195 | .default_intensity = 0xa0, | |
196 | }; | |
197 | ||
198 | static struct platform_device palmz71_backlight_device = { | |
199 | .name = "omap-bl", | |
200 | .id = -1, | |
201 | .dev = { | |
202 | .platform_data = &palmz71_backlight_config, | |
203 | }, | |
204 | }; | |
205 | ||
206 | static struct platform_device *devices[] __initdata = { | |
207 | &palmz71_rom_device, | |
208 | &palmz71_kp_device, | |
ec70e8af MV |
209 | &palmz71_lcd_device, |
210 | &palmz71_irda_device, | |
211 | &palmz71_spi_device, | |
212 | &palmz71_backlight_device, | |
213 | }; | |
214 | ||
215 | static int | |
216 | palmz71_get_pendown_state(void) | |
217 | { | |
0b84b5ca | 218 | return !gpio_get_value(PALMZ71_PENIRQ_GPIO); |
ec70e8af MV |
219 | } |
220 | ||
221 | static const struct ads7846_platform_data palmz71_ts_info = { | |
222 | .model = 7846, | |
223 | .vref_delay_usecs = 100, /* internal, no capacitor */ | |
224 | .x_plate_ohms = 419, | |
225 | .y_plate_ohms = 486, | |
226 | .get_pendown_state = palmz71_get_pendown_state, | |
227 | }; | |
228 | ||
229 | static struct spi_board_info __initdata palmz71_boardinfo[] = { { | |
230 | /* MicroWire (bus 2) CS0 has an ads7846e */ | |
231 | .modalias = "ads7846", | |
232 | .platform_data = &palmz71_ts_info, | |
233 | .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO), | |
234 | .max_speed_hz = 120000 /* max sample rate at 3V */ | |
235 | * 26 /* command + data + overhead */, | |
236 | .bus_num = 2, | |
237 | .chip_select = 0, | |
238 | } }; | |
239 | ||
240 | static struct omap_usb_config palmz71_usb_config __initdata = { | |
241 | .register_dev = 1, /* Mini-B only receptacle */ | |
242 | .hmc_mode = 0, | |
243 | .pins[0] = 2, | |
244 | }; | |
245 | ||
ec70e8af MV |
246 | static struct omap_lcd_config palmz71_lcd_config __initdata = { |
247 | .ctrl_name = "internal", | |
248 | }; | |
249 | ||
e27a93a9 | 250 | static struct omap_board_config_kernel palmz71_config[] __initdata = { |
ec70e8af | 251 | {OMAP_TAG_LCD, &palmz71_lcd_config}, |
ec70e8af MV |
252 | }; |
253 | ||
254 | static irqreturn_t | |
255 | palmz71_powercable(int irq, void *dev_id) | |
256 | { | |
0b84b5ca | 257 | if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { |
ec70e8af | 258 | printk(KERN_INFO "PM: Power cable connected\n"); |
6845664a TG |
259 | irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), |
260 | IRQ_TYPE_EDGE_FALLING); | |
ec70e8af MV |
261 | } else { |
262 | printk(KERN_INFO "PM: Power cable disconnected\n"); | |
6845664a TG |
263 | irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), |
264 | IRQ_TYPE_EDGE_RISING); | |
ec70e8af MV |
265 | } |
266 | return IRQ_HANDLED; | |
267 | } | |
268 | ||
269 | static void __init | |
270 | omap_mpu_wdt_mode(int mode) | |
271 | { | |
272 | if (mode) | |
273 | omap_writew(0x8000, OMAP_WDT_TIMER_MODE); | |
274 | else { | |
275 | omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); | |
276 | omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); | |
277 | } | |
278 | } | |
279 | ||
280 | static void __init | |
281 | palmz71_gpio_setup(int early) | |
282 | { | |
283 | if (early) { | |
284 | /* Only set GPIO1 so we have a working serial */ | |
e918edf7 | 285 | gpio_direction_output(1, 1); |
ec70e8af MV |
286 | } else { |
287 | /* Set MMC/SD host WP pin as input */ | |
f2d18fea | 288 | if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) { |
ec70e8af MV |
289 | printk(KERN_ERR "Could not reserve WP GPIO!\n"); |
290 | return; | |
291 | } | |
40e3925b | 292 | gpio_direction_input(PALMZ71_MMC_WP_GPIO); |
ec70e8af MV |
293 | |
294 | /* Monitor the Power-cable-connected signal */ | |
f2d18fea | 295 | if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) { |
ec70e8af MV |
296 | printk(KERN_ERR |
297 | "Could not reserve cable signal GPIO!\n"); | |
298 | return; | |
299 | } | |
40e3925b | 300 | gpio_direction_input(PALMZ71_USBDETECT_GPIO); |
15f74b03 | 301 | if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), |
ec70e8af MV |
302 | palmz71_powercable, IRQF_SAMPLE_RANDOM, |
303 | "palmz71-cable", 0)) | |
304 | printk(KERN_ERR | |
305 | "IRQ request for power cable failed!\n"); | |
15f74b03 | 306 | palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0); |
ec70e8af MV |
307 | } |
308 | } | |
309 | ||
310 | static void __init | |
311 | omap_palmz71_init(void) | |
312 | { | |
c33da3a8 JK |
313 | /* mux pins for uarts */ |
314 | omap_cfg_reg(UART1_TX); | |
315 | omap_cfg_reg(UART1_RTS); | |
316 | omap_cfg_reg(UART2_TX); | |
317 | omap_cfg_reg(UART2_RTS); | |
318 | omap_cfg_reg(UART3_TX); | |
319 | omap_cfg_reg(UART3_RX); | |
320 | ||
ec70e8af MV |
321 | palmz71_gpio_setup(1); |
322 | omap_mpu_wdt_mode(0); | |
323 | ||
324 | omap_board_config = palmz71_config; | |
325 | omap_board_config_size = ARRAY_SIZE(palmz71_config); | |
326 | ||
327 | platform_add_devices(devices, ARRAY_SIZE(devices)); | |
328 | ||
329 | spi_register_board_info(palmz71_boardinfo, | |
330 | ARRAY_SIZE(palmz71_boardinfo)); | |
dd0cdd88 | 331 | omap1_usb_init(&palmz71_usb_config); |
ec70e8af | 332 | omap_serial_init(); |
1ed16a86 | 333 | omap_register_i2c_bus(1, 100, NULL, 0); |
ec70e8af MV |
334 | palmz71_gpio_setup(0); |
335 | } | |
336 | ||
337 | static void __init | |
338 | omap_palmz71_map_io(void) | |
339 | { | |
340 | omap1_map_common_io(); | |
341 | } | |
342 | ||
343 | MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") | |
71ee7dad RK |
344 | .boot_params = 0x10000100, |
345 | .map_io = omap_palmz71_map_io, | |
346 | .reserve = omap_reserve, | |
347 | .init_irq = omap_palmz71_init_irq, | |
348 | .init_machine = omap_palmz71_init, | |
349 | .timer = &omap_timer, | |
ec70e8af | 350 | MACHINE_END |