[mirror_ubuntu-bionic-kernel.git] / arch / arm / mach-omap1 / board-palmz71.c

/*
 * linux/arch/arm/mach-omap1/board-palmz71.c
 *
 * Modified from board-generic.c
 *
 * Support for the Palm Zire71 PDA.
 *
 * Original version : Laurent Gonzalez
 *
 * Modified for zire71 : Marek Vasut
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/notifier.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irda.h>
#include <plat/keypad.h>

#include <mach/hardware.h>
#include <mach/usb.h>

#include "common.h"

#define PALMZ71_USBDETECT_GPIO	0
#define PALMZ71_PENIRQ_GPIO	6
#define PALMZ71_MMC_WP_GPIO	8
#define PALMZ71_HDQ_GPIO 	11

#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)

static const unsigned int palmz71_keymap[] = {
	KEY(0, 0, KEY_F1),
	KEY(1, 0, KEY_F2),
	KEY(2, 0, KEY_F3),
	KEY(3, 0, KEY_F4),
	KEY(4, 0, KEY_POWER),
	KEY(0, 1, KEY_LEFT),
	KEY(1, 1, KEY_DOWN),
	KEY(2, 1, KEY_UP),
	KEY(3, 1, KEY_RIGHT),
	KEY(4, 1, KEY_ENTER),
	KEY(0, 2, KEY_CAMERA),
};

static const struct matrix_keymap_data palmz71_keymap_data = {
	.keymap		= palmz71_keymap,
	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
};

static struct omap_kp_platform_data palmz71_kp_data = {
	.rows	= 8,
	.cols	= 8,
	.keymap_data	= &palmz71_keymap_data,
	.rep	= true,
	.delay	= 80,
};

static struct resource palmz71_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device palmz71_kp_device = {
	.name	= "omap-keypad",
	.id	= -1,
	.dev	= {
		.platform_data = &palmz71_kp_data,
	},
	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
	.resource	= palmz71_kp_resources,
};

static struct mtd_partition palmz71_rom_partitions[] = {
	/* PalmOS "Small ROM", contains the bootloader and the debugger */
	{
		.name		= "smallrom",
		.offset		= 0,
		.size		= 0xa000,
		.mask_flags	= MTD_WRITEABLE,
	},
	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
	{
		.name	= "bigrom",
		.offset	= SZ_128K,
		/*
		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
		 * 0x7b0000 bytes in the English-only ("enUS") version.
		 */
		.size		= 0x7b0000,
		.mask_flags	= MTD_WRITEABLE,
	},
};

static struct physmap_flash_data palmz71_rom_data = {
	.width		= 2,
	.set_vpp	= omap1_set_vpp,
	.parts		= palmz71_rom_partitions,
	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
};

static struct resource palmz71_rom_resource = {
	.start	= OMAP_CS0_PHYS,
	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
	.flags	= IORESOURCE_MEM,
};

static struct platform_device palmz71_rom_device = {
	.name	= "physmap-flash",
	.id	= -1,
	.dev = {
		.platform_data = &palmz71_rom_data,
	},
	.num_resources	= 1,
	.resource	= &palmz71_rom_resource,
};

static struct platform_device palmz71_lcd_device = {
	.name	= "lcd_palmz71",
	.id	= -1,
};

static struct omap_irda_config palmz71_irda_config = {
	.transceiver_cap	= IR_SIRMODE,
	.rx_channel		= OMAP_DMA_UART3_RX,
	.tx_channel		= OMAP_DMA_UART3_TX,
	.dest_start		= UART3_THR,
	.src_start		= UART3_RHR,
	.tx_trigger		= 0,
	.rx_trigger		= 0,
};

static struct resource palmz71_irda_resources[] = {
	[0] = {
		.start	= INT_UART3,
		.end	= INT_UART3,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device palmz71_irda_device = {
	.name	= "omapirda",
	.id	= -1,
	.dev = {
		.platform_data = &palmz71_irda_config,
	},
	.num_resources	= ARRAY_SIZE(palmz71_irda_resources),
	.resource	= palmz71_irda_resources,
};

static struct platform_device palmz71_spi_device = {
	.name	= "spi_palmz71",
	.id	= -1,
};

static struct omap_backlight_config palmz71_backlight_config = {
	.default_intensity	= 0xa0,
};

static struct platform_device palmz71_backlight_device = {
	.name	= "omap-bl",
	.id	= -1,
	.dev	= {
		.platform_data = &palmz71_backlight_config,
	},
};

static struct platform_device *devices[] __initdata = {
	&palmz71_rom_device,
	&palmz71_kp_device,
	&palmz71_lcd_device,
	&palmz71_irda_device,
	&palmz71_spi_device,
	&palmz71_backlight_device,
};

static int
palmz71_get_pendown_state(void)
{
	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
}

static const struct ads7846_platform_data palmz71_ts_info = {
	.model			= 7846,
	.vref_delay_usecs	= 100,	/* internal, no capacitor */
	.x_plate_ohms		= 419,
	.y_plate_ohms		= 486,
	.get_pendown_state	= palmz71_get_pendown_state,
};

static struct spi_board_info __initdata palmz71_boardinfo[] = { {
	/* MicroWire (bus 2) CS0 has an ads7846e */
	.modalias	= "ads7846",
	.platform_data	= &palmz71_ts_info,
	.max_speed_hz	= 120000	/* max sample rate at 3V */
				* 26	/* command + data + overhead */,
	.bus_num	= 2,
	.chip_select	= 0,
} };

static struct omap_usb_config palmz71_usb_config __initdata = {
	.register_dev	= 1,	/* Mini-B only receptacle */
	.hmc_mode	= 0,
	.pins[0]	= 2,
};

static struct omap_lcd_config palmz71_lcd_config __initdata = {
	.ctrl_name = "internal",
};

static irqreturn_t
palmz71_powercable(int irq, void *dev_id)
{
	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
		printk(KERN_INFO "PM: Power cable connected\n");
		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
				 IRQ_TYPE_EDGE_FALLING);
	} else {
		printk(KERN_INFO "PM: Power cable disconnected\n");
		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
				 IRQ_TYPE_EDGE_RISING);
	}
	return IRQ_HANDLED;
}

static void __init
omap_mpu_wdt_mode(int mode)
{
	if (mode)
		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
	else {
		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
	}
}

static void __init
palmz71_gpio_setup(int early)
{
	if (early) {
		/* Only set GPIO1 so we have a working serial */
		gpio_direction_output(1, 1);
	} else {
		/* Set MMC/SD host WP pin as input */
		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
			printk(KERN_ERR "Could not reserve WP GPIO!\n");
			return;
		}
		gpio_direction_input(PALMZ71_MMC_WP_GPIO);

		/* Monitor the Power-cable-connected signal */
		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
			printk(KERN_ERR
				"Could not reserve cable signal GPIO!\n");
			return;
		}
		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
				palmz71_powercable, 0, "palmz71-cable", NULL))
			printk(KERN_ERR
					"IRQ request for power cable failed!\n");
		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
	}
}

static void __init
omap_palmz71_init(void)
{
	/* mux pins for uarts */
	omap_cfg_reg(UART1_TX);
	omap_cfg_reg(UART1_RTS);
	omap_cfg_reg(UART2_TX);
	omap_cfg_reg(UART2_RTS);
	omap_cfg_reg(UART3_TX);
	omap_cfg_reg(UART3_RX);

	palmz71_gpio_setup(1);
	omap_mpu_wdt_mode(0);

	platform_add_devices(devices, ARRAY_SIZE(devices));

	palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
	spi_register_board_info(palmz71_boardinfo,
				ARRAY_SIZE(palmz71_boardinfo));
	omap1_usb_init(&palmz71_usb_config);
	omap_serial_init();
	omap_register_i2c_bus(1, 100, NULL, 0);
	palmz71_gpio_setup(0);

	omapfb_set_lcd_config(&palmz71_lcd_config);
}

MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
	.atag_offset	= 0x100,
	.map_io		= omap15xx_map_io,
	.init_early     = omap1_init_early,
	.reserve	= omap_reserve,
	.init_irq	= omap1_init_irq,
	.init_machine	= omap_palmz71_init,
	.init_late	= omap1_init_late,
	.timer		= &omap1_timer,
	.restart	= omap1_restart,
MACHINE_END
Commit	Line	Data
ec70e8af MV	1	/*
	2	* linux/arch/arm/mach-omap1/board-palmz71.c
	3	*
	4	* Modified from board-generic.c
	5	*
	6	* Support for the Palm Zire71 PDA.
	7	*
	8	* Original version : Laurent Gonzalez
	9	*
	10	* Modified for zire71 : Marek Vasut
	11	*
	12	* This program is free software; you can redistribute it and/or modify
	13	* it under the terms of the GNU General Public License version 2 as
	14	* published by the Free Software Foundation.
	15	*/
	16
	17	#include <linux/delay.h>
2f8163ba	18	#include <linux/gpio.h>
ec70e8af MV	19	#include <linux/kernel.h>
	20	#include <linux/init.h>
	21	#include <linux/platform_device.h>
	22	#include <linux/notifier.h>
	23	#include <linux/clk.h>
	24	#include <linux/irq.h>
	25	#include <linux/input.h>
	26	#include <linux/interrupt.h>
	27	#include <linux/mtd/mtd.h>
	28	#include <linux/mtd/partitions.h>
561b036a	29	#include <linux/mtd/physmap.h>
ddba6c7f	30	#include <linux/omapfb.h>
2e3ee9f4 TL	31	#include <linux/spi/spi.h>
2e3ee9f4 TL	32	#include <linux/spi/ads7846.h>
cc012729	33	#include <linux/platform_data/omap1_bl.h>
ec70e8af	34
ec70e8af MV	35	#include <asm/mach-types.h>
	36	#include <asm/mach/arch.h>
	37	#include <asm/mach/map.h>
ec70e8af	38
561b036a	39	#include <plat/flash.h>
ce491cf8	40	#include <plat/mux.h>
ce491cf8 TL	41	#include <plat/dma.h>
ce491cf8 TL	42	#include <plat/tc.h>
ce491cf8 TL	43	#include <plat/irda.h>
ce491cf8 TL	44	#include <plat/keypad.h>
ec70e8af	45
2e3ee9f4	46	#include <mach/hardware.h>
b924b204	47	#include <mach/usb.h>
2e3ee9f4 TL	48
2e3ee9f4 TL	49	#include "common.h"
ec70e8af	50
b2830810 TL	51	#define PALMZ71_USBDETECT_GPIO 0
	52	#define PALMZ71_PENIRQ_GPIO 6
	53	#define PALMZ71_MMC_WP_GPIO 8
	54	#define PALMZ71_HDQ_GPIO 11
	55
	56	#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
	57	#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
	58	#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
	59	#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
	60
da1f026b	61	static const unsigned int palmz71_keymap[] = {
ec70e8af	62	KEY(0, 0, KEY_F1),
da1f026b JK	63	KEY(1, 0, KEY_F2),
	64	KEY(2, 0, KEY_F3),
	65	KEY(3, 0, KEY_F4),
	66	KEY(4, 0, KEY_POWER),
	67	KEY(0, 1, KEY_LEFT),
ec70e8af	68	KEY(1, 1, KEY_DOWN),
da1f026b JK	69	KEY(2, 1, KEY_UP),
	70	KEY(3, 1, KEY_RIGHT),
	71	KEY(4, 1, KEY_ENTER),
	72	KEY(0, 2, KEY_CAMERA),
	73	};
	74
	75	static const struct matrix_keymap_data palmz71_keymap_data = {
	76	.keymap = palmz71_keymap,
	77	.keymap_size = ARRAY_SIZE(palmz71_keymap),
ec70e8af MV	78	};
	79
	80	static struct omap_kp_platform_data palmz71_kp_data = {
	81	.rows = 8,
	82	.cols = 8,
da1f026b JK	83	.keymap_data = &palmz71_keymap_data,
da1f026b JK	84	.rep = true,
ec70e8af MV	85	.delay = 80,
	86	};
	87
	88	static struct resource palmz71_kp_resources[] = {
	89	[0] = {
	90	.start = INT_KEYBOARD,
	91	.end = INT_KEYBOARD,
	92	.flags = IORESOURCE_IRQ,
	93	},
	94	};
	95
	96	static struct platform_device palmz71_kp_device = {
	97	.name = "omap-keypad",
	98	.id = -1,
	99	.dev = {
	100	.platform_data = &palmz71_kp_data,
	101	},
	102	.num_resources = ARRAY_SIZE(palmz71_kp_resources),
	103	.resource = palmz71_kp_resources,
	104	};
	105
	106	static struct mtd_partition palmz71_rom_partitions[] = {
	107	/* PalmOS "Small ROM", contains the bootloader and the debugger */
	108	{
	109	.name = "smallrom",
	110	.offset = 0,
	111	.size = 0xa000,
	112	.mask_flags = MTD_WRITEABLE,
	113	},
	114	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
	115	{
	116	.name = "bigrom",
	117	.offset = SZ_128K,
	118	/*
	119	* 0x5f0000 bytes big in the multi-language ("EFIGS") version,
	120	* 0x7b0000 bytes in the English-only ("enUS") version.
	121	*/
	122	.size = 0x7b0000,
	123	.mask_flags = MTD_WRITEABLE,
	124	},
	125	};
	126
561b036a	127	static struct physmap_flash_data palmz71_rom_data = {
ec70e8af	128	.width = 2,
561b036a	129	.set_vpp = omap1_set_vpp,
ec70e8af MV	130	.parts = palmz71_rom_partitions,
	131	.nr_parts = ARRAY_SIZE(palmz71_rom_partitions),
	132	};
	133
	134	static struct resource palmz71_rom_resource = {
	135	.start = OMAP_CS0_PHYS,
	136	.end = OMAP_CS0_PHYS + SZ_8M - 1,
	137	.flags = IORESOURCE_MEM,
	138	};
	139
	140	static struct platform_device palmz71_rom_device = {
561b036a	141	.name = "physmap-flash",
ec70e8af MV	142	.id = -1,
	143	.dev = {
	144	.platform_data = &palmz71_rom_data,
	145	},
	146	.num_resources = 1,
	147	.resource = &palmz71_rom_resource,
	148	};
	149
	150	static struct platform_device palmz71_lcd_device = {
	151	.name = "lcd_palmz71",
	152	.id = -1,
	153	};
	154
	155	static struct omap_irda_config palmz71_irda_config = {
	156	.transceiver_cap = IR_SIRMODE,
	157	.rx_channel = OMAP_DMA_UART3_RX,
	158	.tx_channel = OMAP_DMA_UART3_TX,
	159	.dest_start = UART3_THR,
	160	.src_start = UART3_RHR,
	161	.tx_trigger = 0,
	162	.rx_trigger = 0,
	163	};
	164
	165	static struct resource palmz71_irda_resources[] = {
	166	[0] = {
	167	.start = INT_UART3,
	168	.end = INT_UART3,
	169	.flags = IORESOURCE_IRQ,
	170	},
	171	};
	172
	173	static struct platform_device palmz71_irda_device = {
	174	.name = "omapirda",
	175	.id = -1,
	176	.dev = {
	177	.platform_data = &palmz71_irda_config,
	178	},
	179	.num_resources = ARRAY_SIZE(palmz71_irda_resources),
	180	.resource = palmz71_irda_resources,
	181	};
	182
	183	static struct platform_device palmz71_spi_device = {
	184	.name = "spi_palmz71",
	185	.id = -1,
	186	};
	187
ec70e8af MV	188	static struct omap_backlight_config palmz71_backlight_config = {
	189	.default_intensity = 0xa0,
	190	};
	191
	192	static struct platform_device palmz71_backlight_device = {
	193	.name = "omap-bl",
	194	.id = -1,
	195	.dev = {
	196	.platform_data = &palmz71_backlight_config,
	197	},
	198	};
	199
	200	static struct platform_device *devices[] __initdata = {
	201	&palmz71_rom_device,
	202	&palmz71_kp_device,
ec70e8af MV	203	&palmz71_lcd_device,
	204	&palmz71_irda_device,
	205	&palmz71_spi_device,
	206	&palmz71_backlight_device,
	207	};
	208
	209	static int
	210	palmz71_get_pendown_state(void)
	211	{
0b84b5ca	212	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
ec70e8af MV	213	}
	214
	215	static const struct ads7846_platform_data palmz71_ts_info = {
	216	.model = 7846,
	217	.vref_delay_usecs = 100, /* internal, no capacitor */
	218	.x_plate_ohms = 419,
	219	.y_plate_ohms = 486,
	220	.get_pendown_state = palmz71_get_pendown_state,
	221	};
	222
	223	static struct spi_board_info __initdata palmz71_boardinfo[] = { {
	224	/* MicroWire (bus 2) CS0 has an ads7846e */
	225	.modalias = "ads7846",
	226	.platform_data = &palmz71_ts_info,
ec70e8af MV	227	.max_speed_hz = 120000 /* max sample rate at 3V */
	228	* 26 /* command + data + overhead */,
	229	.bus_num = 2,
	230	.chip_select = 0,
	231	} };
	232
	233	static struct omap_usb_config palmz71_usb_config __initdata = {
	234	.register_dev = 1, /* Mini-B only receptacle */
	235	.hmc_mode = 0,
	236	.pins[0] = 2,
	237	};
	238
ec70e8af MV	239	static struct omap_lcd_config palmz71_lcd_config __initdata = {
	240	.ctrl_name = "internal",
	241	};
	242
ec70e8af MV	243	static irqreturn_t
	244	palmz71_powercable(int irq, void *dev_id)
	245	{
0b84b5ca	246	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
ec70e8af	247	printk(KERN_INFO "PM: Power cable connected\n");
6845664a TG	248	irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
6845664a TG	249	IRQ_TYPE_EDGE_FALLING);
ec70e8af MV	250	} else {
ec70e8af MV	251	printk(KERN_INFO "PM: Power cable disconnected\n");
6845664a TG	252	irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
6845664a TG	253	IRQ_TYPE_EDGE_RISING);
ec70e8af MV	254	}
	255	return IRQ_HANDLED;
	256	}
	257
	258	static void __init
	259	omap_mpu_wdt_mode(int mode)
	260	{
	261	if (mode)
	262	omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
	263	else {
	264	omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
	265	omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
	266	}
	267	}
	268
	269	static void __init
	270	palmz71_gpio_setup(int early)
	271	{
	272	if (early) {
	273	/* Only set GPIO1 so we have a working serial */
e918edf7	274	gpio_direction_output(1, 1);
ec70e8af MV	275	} else {
ec70e8af MV	276	/* Set MMC/SD host WP pin as input */
f2d18fea	277	if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
ec70e8af MV	278	printk(KERN_ERR "Could not reserve WP GPIO!\n");
	279	return;
	280	}
40e3925b	281	gpio_direction_input(PALMZ71_MMC_WP_GPIO);
ec70e8af MV	282
ec70e8af MV	283	/* Monitor the Power-cable-connected signal */
f2d18fea	284	if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
ec70e8af MV	285	printk(KERN_ERR
	286	"Could not reserve cable signal GPIO!\n");
	287	return;
	288	}
40e3925b	289	gpio_direction_input(PALMZ71_USBDETECT_GPIO);
15f74b03	290	if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
9863fa6c	291	palmz71_powercable, 0, "palmz71-cable", NULL))
ec70e8af MV	292	printk(KERN_ERR
ec70e8af MV	293	"IRQ request for power cable failed!\n");
a7022d60	294	palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
ec70e8af MV	295	}
	296	}
	297
	298	static void __init
	299	omap_palmz71_init(void)
	300	{
c33da3a8 JK	301	/* mux pins for uarts */
	302	omap_cfg_reg(UART1_TX);
	303	omap_cfg_reg(UART1_RTS);
	304	omap_cfg_reg(UART2_TX);
	305	omap_cfg_reg(UART2_RTS);
	306	omap_cfg_reg(UART3_TX);
	307	omap_cfg_reg(UART3_RX);
	308
ec70e8af MV	309	palmz71_gpio_setup(1);
	310	omap_mpu_wdt_mode(0);
	311
ec70e8af MV	312	platform_add_devices(devices, ARRAY_SIZE(devices));
ec70e8af MV	313
46a0a540	314	palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
ec70e8af MV	315	spi_register_board_info(palmz71_boardinfo,
ec70e8af MV	316	ARRAY_SIZE(palmz71_boardinfo));
dd0cdd88	317	omap1_usb_init(&palmz71_usb_config);
ec70e8af	318	omap_serial_init();
1ed16a86	319	omap_register_i2c_bus(1, 100, NULL, 0);
ec70e8af	320	palmz71_gpio_setup(0);
ddba6c7f TV	321
ddba6c7f TV	322	omapfb_set_lcd_config(&palmz71_lcd_config);
ec70e8af MV	323	}
ec70e8af MV	324
ec70e8af	325	MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
246e389d	326	.atag_offset = 0x100,
7b88e62f TL	327	.map_io = omap15xx_map_io,
7b88e62f TL	328	.init_early = omap1_init_early,
71ee7dad	329	.reserve = omap_reserve,
7b88e62f	330	.init_irq = omap1_init_irq,
71ee7dad	331	.init_machine = omap_palmz71_init,
82c3bd03	332	.init_late = omap1_init_late,
e74984e4	333	.timer = &omap1_timer,
baa95883	334	.restart = omap1_restart,
ec70e8af	335	MACHINE_END