]>
Commit | Line | Data |
---|---|---|
d40f3f15 TN |
1 | /* |
2 | * linux/arch/arm/mach-omap2/board-omap3logic.c | |
3 | * | |
4 | * Copyright (C) 2010 Li-Pro.Net | |
5 | * Stephan Linz <linz@li-pro.net> | |
6 | * | |
7 | * Copyright (C) 2010 Logic Product Development, Inc. | |
8 | * Peter Barada <peter.barada@logicpd.com> | |
9 | * | |
10 | * Modified from Beagle, EVM, and RX51 | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
15 | */ | |
16 | ||
17 | #include <linux/kernel.h> | |
18 | #include <linux/init.h> | |
19 | #include <linux/platform_device.h> | |
20 | #include <linux/delay.h> | |
21 | #include <linux/err.h> | |
22 | #include <linux/clk.h> | |
23 | #include <linux/io.h> | |
24 | #include <linux/gpio.h> | |
25 | ||
26 | #include <linux/regulator/machine.h> | |
27 | ||
28 | #include <linux/i2c/twl.h> | |
8430281b | 29 | #include <linux/mmc/host.h> |
d40f3f15 TN |
30 | |
31 | #include <mach/hardware.h> | |
32 | #include <asm/mach-types.h> | |
33 | #include <asm/mach/arch.h> | |
34 | #include <asm/mach/map.h> | |
35 | ||
36 | #include "mux.h" | |
8430281b | 37 | #include "hsmmc.h" |
04aeae77 | 38 | #include "timer-gp.h" |
d40f3f15 TN |
39 | |
40 | #include <plat/mux.h> | |
41 | #include <plat/board.h> | |
42 | #include <plat/common.h> | |
26428b5c | 43 | #include <plat/gpmc-smsc911x.h> |
d40f3f15 | 44 | #include <plat/gpmc.h> |
d40f3f15 TN |
45 | #include <plat/sdrc.h> |
46 | #include <plat/control.h> | |
47 | ||
48 | #define OMAP3LOGIC_SMSC911X_CS 1 | |
49 | ||
50 | #define OMAP3530_LV_SOM_MMC_GPIO_CD 110 | |
51 | #define OMAP3530_LV_SOM_MMC_GPIO_WP 126 | |
52 | #define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ 152 | |
53 | ||
54 | #define OMAP3_TORPEDO_MMC_GPIO_CD 127 | |
55 | #define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 | |
56 | ||
57 | static struct regulator_consumer_supply omap3logic_vmmc1_supply = { | |
58 | .supply = "vmmc", | |
59 | }; | |
60 | ||
61 | /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ | |
62 | static struct regulator_init_data omap3logic_vmmc1 = { | |
63 | .constraints = { | |
64 | .name = "VMMC1", | |
65 | .min_uV = 1850000, | |
66 | .max_uV = 3150000, | |
67 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
68 | | REGULATOR_MODE_STANDBY, | |
69 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
70 | | REGULATOR_CHANGE_MODE | |
71 | | REGULATOR_CHANGE_STATUS, | |
72 | }, | |
73 | .num_consumer_supplies = 1, | |
74 | .consumer_supplies = &omap3logic_vmmc1_supply, | |
75 | }; | |
76 | ||
77 | static struct twl4030_gpio_platform_data omap3logic_gpio_data = { | |
78 | .gpio_base = OMAP_MAX_GPIO_LINES, | |
79 | .irq_base = TWL4030_GPIO_IRQ_BASE, | |
80 | .irq_end = TWL4030_GPIO_IRQ_END, | |
81 | .use_leds = true, | |
82 | .pullups = BIT(1), | |
83 | .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | |
84 | | BIT(13) | BIT(15) | BIT(16) | BIT(17), | |
85 | }; | |
86 | ||
87 | static struct twl4030_platform_data omap3logic_twldata = { | |
88 | .irq_base = TWL4030_IRQ_BASE, | |
89 | .irq_end = TWL4030_IRQ_END, | |
90 | ||
91 | /* platform_data for children goes here */ | |
92 | .gpio = &omap3logic_gpio_data, | |
8430281b | 93 | .vmmc1 = &omap3logic_vmmc1, |
d40f3f15 TN |
94 | }; |
95 | ||
96 | static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { | |
97 | { | |
98 | I2C_BOARD_INFO("twl4030", 0x48), | |
99 | .flags = I2C_CLIENT_WAKE, | |
100 | .irq = INT_34XX_SYS_NIRQ, | |
101 | .platform_data = &omap3logic_twldata, | |
102 | }, | |
103 | }; | |
104 | ||
105 | static int __init omap3logic_i2c_init(void) | |
106 | { | |
107 | omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, | |
108 | ARRAY_SIZE(omap3logic_i2c_boardinfo)); | |
109 | return 0; | |
110 | } | |
111 | ||
8430281b TN |
112 | static struct omap2_hsmmc_info __initdata board_mmc_info[] = { |
113 | { | |
114 | .name = "external", | |
115 | .mmc = 1, | |
116 | .caps = MMC_CAP_4_BIT_DATA, | |
117 | .gpio_cd = -EINVAL, | |
118 | .gpio_wp = -EINVAL, | |
119 | }, | |
120 | {} /* Terminator */ | |
121 | }; | |
122 | ||
123 | static void __init board_mmc_init(void) | |
124 | { | |
125 | if (machine_is_omap3530_lv_som()) { | |
126 | /* OMAP3530 LV SOM board */ | |
127 | board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD; | |
128 | board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP; | |
129 | omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT); | |
130 | omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT); | |
131 | } else if (machine_is_omap3_torpedo()) { | |
132 | /* OMAP3 Torpedo board */ | |
133 | board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD; | |
134 | omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT); | |
135 | } else { | |
136 | /* unsupported board */ | |
137 | printk(KERN_ERR "%s(): unknown machine type\n", __func__); | |
138 | return; | |
139 | } | |
140 | ||
141 | omap2_hsmmc_init(board_mmc_info); | |
142 | /* link regulators to MMC adapters */ | |
143 | omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev; | |
144 | } | |
145 | ||
26428b5c TN |
146 | static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { |
147 | .cs = OMAP3LOGIC_SMSC911X_CS, | |
148 | .gpio_irq = -EINVAL, | |
149 | .gpio_reset = -EINVAL, | |
150 | .flags = IORESOURCE_IRQ_LOWLEVEL, | |
151 | }; | |
152 | ||
153 | /* TODO/FIXME (comment by Peter Barada, LogicPD): | |
154 | * Fix the PBIAS voltage for Torpedo MMC1 pins that | |
155 | * are used for other needs (IRQs, etc). */ | |
156 | static void omap3torpedo_fix_pbias_voltage(void) | |
157 | { | |
158 | u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; | |
159 | u32 reg; | |
160 | ||
161 | if (machine_is_omap3_torpedo()) | |
162 | { | |
163 | /* Set the bias for the pin */ | |
164 | reg = omap_ctrl_readl(control_pbias_offset); | |
165 | ||
166 | reg &= ~OMAP343X_PBIASLITEPWRDNZ1; | |
167 | omap_ctrl_writel(reg, control_pbias_offset); | |
168 | ||
169 | /* 100ms delay required for PBIAS configuration */ | |
170 | msleep(100); | |
171 | ||
172 | reg |= OMAP343X_PBIASLITEVMODE1; | |
173 | reg |= OMAP343X_PBIASLITEPWRDNZ1; | |
174 | omap_ctrl_writel(reg | 0x300, control_pbias_offset); | |
175 | } | |
176 | } | |
177 | ||
178 | static inline void __init board_smsc911x_init(void) | |
179 | { | |
180 | if (machine_is_omap3530_lv_som()) { | |
181 | /* OMAP3530 LV SOM board */ | |
182 | board_smsc911x_data.gpio_irq = | |
183 | OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ; | |
184 | omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT); | |
185 | } else if (machine_is_omap3_torpedo()) { | |
186 | /* OMAP3 Torpedo board */ | |
187 | board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ; | |
188 | omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT); | |
189 | } else { | |
190 | /* unsupported board */ | |
191 | printk(KERN_ERR "%s(): unknown machine type\n", __func__); | |
192 | return; | |
193 | } | |
194 | ||
195 | gpmc_smsc911x_init(&board_smsc911x_data); | |
196 | } | |
197 | ||
d40f3f15 TN |
198 | static void __init omap3logic_init_irq(void) |
199 | { | |
200 | omap2_init_common_hw(NULL, NULL); | |
201 | omap_init_irq(); | |
202 | omap_gpio_init(); | |
203 | } | |
204 | ||
26428b5c TN |
205 | #ifdef CONFIG_OMAP_MUX |
206 | static struct omap_board_mux board_mux[] __initdata = { | |
207 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
208 | }; | |
209 | #else | |
210 | #define board_mux NULL | |
211 | #endif | |
212 | ||
d40f3f15 TN |
213 | static void __init omap3logic_init(void) |
214 | { | |
26428b5c TN |
215 | omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); |
216 | omap3torpedo_fix_pbias_voltage(); | |
d40f3f15 TN |
217 | omap3logic_i2c_init(); |
218 | omap_serial_init(); | |
8430281b | 219 | board_mmc_init(); |
26428b5c TN |
220 | board_smsc911x_init(); |
221 | ||
d40f3f15 TN |
222 | /* Ensure SDRC pins are mux'd for self-refresh */ |
223 | omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); | |
224 | omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); | |
225 | } | |
226 | ||
227 | MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") | |
228 | .phys_io = 0x48000000, | |
229 | .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, | |
230 | .boot_params = 0x80000100, | |
231 | .map_io = omap3_map_io, | |
232 | .init_irq = omap3logic_init_irq, | |
233 | .init_machine = omap3logic_init, | |
234 | .timer = &omap_timer, | |
235 | MACHINE_END | |
236 | ||
237 | MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") | |
238 | .phys_io = 0x48000000, | |
239 | .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, | |
240 | .boot_params = 0x80000100, | |
241 | .map_io = omap3_map_io, | |
242 | .init_irq = omap3logic_init_irq, | |
243 | .init_machine = omap3logic_init, | |
244 | .timer = &omap_timer, | |
245 | MACHINE_END |