]>
Commit | Line | Data |
---|---|---|
b2441318 | 1 | /* SPDX-License-Identifier: GPL-2.0 */ |
d8a94458 PW |
2 | /* |
3 | * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions | |
4 | * | |
5 | * Copyright (C) 2005-2009 Texas Instruments, Inc. | |
6 | * Copyright (C) 2004-2009 Nokia Corporation | |
7 | * | |
8 | * Richard Woodruff <r-woodruff2@ti.com> | |
9 | * | |
10 | * The OMAP2 processor can be run at several discrete 'PRCM configurations'. | |
11 | * These configurations are characterized by voltage and speed for clocks. | |
12 | * The device is only validated for certain combinations. One way to express | |
13 | * these combinations is via the 'ratio's' which the clocks operate with | |
14 | * respect to each other. These ratio sets are for a given voltage/DPLL | |
15 | * setting. All configurations can be described by a DPLL setting and a ratio | |
16 | * There are 3 ratio sets for the 2430 and X ratio sets for 2420. | |
17 | * | |
18 | * 2430 differs from 2420 in that there are no more phase synchronizers used. | |
19 | * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs | |
20 | * 2430 (iva2.1, NOdsp, mdm) | |
21 | * | |
22 | * XXX Missing voltage data. | |
23 | * | |
24 | * THe format described in this file is deprecated. Once a reasonable | |
25 | * OPP API exists, the data in this file should be converted to use it. | |
26 | * | |
27 | * This is technically part of the OMAP2xxx clock code. | |
28 | */ | |
29 | ||
30 | #ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H | |
31 | #define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H | |
32 | ||
33 | /** | |
34 | * struct prcm_config - define clock rates on a per-OPP basis (24xx) | |
35 | * | |
36 | * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. | |
37 | * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP | |
38 | * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM | |
39 | * | |
40 | * This is deprecated. As soon as we have a decent OPP API, we should | |
41 | * move all this stuff to it. | |
42 | */ | |
43 | struct prcm_config { | |
44 | unsigned long xtal_speed; /* crystal rate */ | |
45 | unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ | |
46 | unsigned long mpu_speed; /* speed of MPU */ | |
47 | unsigned long cm_clksel_mpu; /* mpu divider */ | |
48 | unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ | |
49 | unsigned long cm_clksel_gfx; /* gfx dividers */ | |
50 | unsigned long cm_clksel1_core; /* major subsystem dividers */ | |
51 | unsigned long cm_clksel1_pll; /* m,n */ | |
52 | unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ | |
53 | unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ | |
54 | unsigned long base_sdrc_rfr; /* base refresh timing for a set */ | |
99541195 | 55 | unsigned short flags; |
d8a94458 PW |
56 | }; |
57 | ||
58 | ||
59 | /* Core fields for cm_clksel, not ratio governed */ | |
60 | #define RX_CLKSEL_DSS1 (0x10 << 8) | |
61 | #define RX_CLKSEL_DSS2 (0x0 << 13) | |
62 | #define RX_CLKSEL_SSI (0x5 << 20) | |
63 | ||
64 | /*------------------------------------------------------------------------- | |
65 | * Voltage/DPLL ratios | |
66 | *-------------------------------------------------------------------------*/ | |
67 | ||
68 | /* 2430 Ratio's, 2430-Ratio Config 1 */ | |
69 | #define R1_CLKSEL_L3 (4 << 0) | |
70 | #define R1_CLKSEL_L4 (2 << 5) | |
71 | #define R1_CLKSEL_USB (4 << 25) | |
72 | #define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \ | |
73 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | |
74 | R1_CLKSEL_L4 | R1_CLKSEL_L3) | |
75 | #define R1_CLKSEL_MPU (2 << 0) | |
76 | #define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU | |
77 | #define R1_CLKSEL_DSP (2 << 0) | |
78 | #define R1_CLKSEL_DSP_IF (2 << 5) | |
79 | #define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF) | |
80 | #define R1_CLKSEL_GFX (2 << 0) | |
81 | #define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX | |
82 | #define R1_CLKSEL_MDM (4 << 0) | |
83 | #define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM | |
84 | ||
85 | /* 2430-Ratio Config 2 */ | |
86 | #define R2_CLKSEL_L3 (6 << 0) | |
87 | #define R2_CLKSEL_L4 (2 << 5) | |
88 | #define R2_CLKSEL_USB (2 << 25) | |
89 | #define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \ | |
90 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | |
91 | R2_CLKSEL_L4 | R2_CLKSEL_L3) | |
92 | #define R2_CLKSEL_MPU (2 << 0) | |
93 | #define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU | |
94 | #define R2_CLKSEL_DSP (2 << 0) | |
95 | #define R2_CLKSEL_DSP_IF (3 << 5) | |
96 | #define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF) | |
97 | #define R2_CLKSEL_GFX (2 << 0) | |
98 | #define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX | |
99 | #define R2_CLKSEL_MDM (6 << 0) | |
100 | #define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM | |
101 | ||
102 | /* 2430-Ratio Bootm (BYPASS) */ | |
103 | #define RB_CLKSEL_L3 (1 << 0) | |
104 | #define RB_CLKSEL_L4 (1 << 5) | |
105 | #define RB_CLKSEL_USB (1 << 25) | |
106 | #define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \ | |
107 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | |
108 | RB_CLKSEL_L4 | RB_CLKSEL_L3) | |
109 | #define RB_CLKSEL_MPU (1 << 0) | |
110 | #define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU | |
111 | #define RB_CLKSEL_DSP (1 << 0) | |
112 | #define RB_CLKSEL_DSP_IF (1 << 5) | |
113 | #define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF) | |
114 | #define RB_CLKSEL_GFX (1 << 0) | |
115 | #define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX | |
116 | #define RB_CLKSEL_MDM (1 << 0) | |
117 | #define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM | |
118 | ||
119 | /* 2420 Ratio Equivalents */ | |
120 | #define RXX_CLKSEL_VLYNQ (0x12 << 15) | |
121 | #define RXX_CLKSEL_SSI (0x8 << 20) | |
122 | ||
123 | /* 2420-PRCM III 532MHz core */ | |
124 | #define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ | |
125 | #define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ | |
126 | #define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ | |
127 | #define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ | |
128 | RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ | |
129 | RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ | |
130 | RIII_CLKSEL_L3) | |
131 | #define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ | |
132 | #define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU | |
133 | #define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ | |
134 | #define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ | |
135 | #define RIII_SYNC_DSP (1 << 7) /* Enable sync */ | |
136 | #define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ | |
137 | #define RIII_SYNC_IVA (1 << 13) /* Enable sync */ | |
138 | #define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ | |
139 | RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ | |
140 | RIII_CLKSEL_DSP) | |
141 | #define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ | |
142 | #define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX | |
143 | ||
144 | /* 2420-PRCM II 600MHz core */ | |
145 | #define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ | |
146 | #define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ | |
147 | #define RII_CLKSEL_USB (2 << 25) /* 50MHz */ | |
148 | #define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \ | |
149 | RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ | |
150 | RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \ | |
151 | RII_CLKSEL_L3) | |
152 | #define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ | |
153 | #define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU | |
154 | #define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ | |
155 | #define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ | |
156 | #define RII_SYNC_DSP (0 << 7) /* Bypass sync */ | |
157 | #define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ | |
158 | #define RII_SYNC_IVA (0 << 13) /* Bypass sync */ | |
159 | #define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \ | |
160 | RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ | |
161 | RII_CLKSEL_DSP) | |
162 | #define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ | |
163 | #define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX | |
164 | ||
165 | /* 2420-PRCM I 660MHz core */ | |
166 | #define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ | |
167 | #define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ | |
168 | #define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ | |
169 | #define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \ | |
170 | RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ | |
171 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | |
172 | RI_CLKSEL_L4 | RI_CLKSEL_L3) | |
173 | #define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ | |
174 | #define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU | |
175 | #define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ | |
176 | #define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ | |
177 | #define RI_SYNC_DSP (1 << 7) /* Activate sync */ | |
178 | #define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ | |
179 | #define RI_SYNC_IVA (0 << 13) /* Bypass sync */ | |
180 | #define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \ | |
181 | RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ | |
182 | RI_CLKSEL_DSP) | |
183 | #define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ | |
184 | #define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX | |
185 | ||
186 | /* 2420-PRCM VII (boot) */ | |
187 | #define RVII_CLKSEL_L3 (1 << 0) | |
188 | #define RVII_CLKSEL_L4 (1 << 5) | |
189 | #define RVII_CLKSEL_DSS1 (1 << 8) | |
190 | #define RVII_CLKSEL_DSS2 (0 << 13) | |
191 | #define RVII_CLKSEL_VLYNQ (1 << 15) | |
192 | #define RVII_CLKSEL_SSI (1 << 20) | |
193 | #define RVII_CLKSEL_USB (1 << 25) | |
194 | ||
195 | #define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ | |
196 | RVII_CLKSEL_VLYNQ | \ | |
197 | RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \ | |
198 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3) | |
199 | ||
200 | #define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ | |
201 | #define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU | |
202 | ||
203 | #define RVII_CLKSEL_DSP (1 << 0) | |
204 | #define RVII_CLKSEL_DSP_IF (1 << 5) | |
205 | #define RVII_SYNC_DSP (0 << 7) | |
206 | #define RVII_CLKSEL_IVA (1 << 8) | |
207 | #define RVII_SYNC_IVA (0 << 13) | |
208 | #define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \ | |
209 | RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \ | |
210 | RVII_CLKSEL_DSP) | |
211 | ||
212 | #define RVII_CLKSEL_GFX (1 << 0) | |
213 | #define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX | |
214 | ||
215 | /*------------------------------------------------------------------------- | |
216 | * 2430 Target modes: Along with each configuration the CPU has several | |
217 | * modes which goes along with them. Modes mainly are the addition of | |
218 | * describe DPLL combinations to go along with a ratio. | |
219 | *-------------------------------------------------------------------------*/ | |
220 | ||
221 | /* Hardware governed */ | |
222 | #define MX_48M_SRC (0 << 3) | |
223 | #define MX_54M_SRC (0 << 5) | |
224 | #define MX_APLLS_CLIKIN_12 (3 << 23) | |
225 | #define MX_APLLS_CLIKIN_13 (2 << 23) | |
226 | #define MX_APLLS_CLIKIN_19_2 (0 << 23) | |
227 | ||
228 | /* | |
229 | * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed | |
230 | * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz | |
231 | */ | |
232 | #define M5A_DPLL_MULT_12 (133 << 12) | |
233 | #define M5A_DPLL_DIV_12 (5 << 8) | |
234 | #define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
235 | M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ | |
236 | MX_APLLS_CLIKIN_12) | |
237 | #define M5A_DPLL_MULT_13 (61 << 12) | |
238 | #define M5A_DPLL_DIV_13 (2 << 8) | |
239 | #define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
240 | M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ | |
241 | MX_APLLS_CLIKIN_13) | |
242 | #define M5A_DPLL_MULT_19 (55 << 12) | |
243 | #define M5A_DPLL_DIV_19 (3 << 8) | |
244 | #define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
245 | M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ | |
246 | MX_APLLS_CLIKIN_19_2) | |
247 | /* #5b (ratio1) target DPLL = 200*2 = 400MHz */ | |
248 | #define M5B_DPLL_MULT_12 (50 << 12) | |
249 | #define M5B_DPLL_DIV_12 (2 << 8) | |
250 | #define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
251 | M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ | |
252 | MX_APLLS_CLIKIN_12) | |
253 | #define M5B_DPLL_MULT_13 (200 << 12) | |
254 | #define M5B_DPLL_DIV_13 (12 << 8) | |
255 | ||
256 | #define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
257 | M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ | |
258 | MX_APLLS_CLIKIN_13) | |
259 | #define M5B_DPLL_MULT_19 (125 << 12) | |
260 | #define M5B_DPLL_DIV_19 (31 << 8) | |
261 | #define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
262 | M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ | |
263 | MX_APLLS_CLIKIN_19_2) | |
264 | /* | |
265 | * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz | |
266 | */ | |
267 | #define M4_DPLL_MULT_12 (133 << 12) | |
268 | #define M4_DPLL_DIV_12 (3 << 8) | |
269 | #define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
270 | M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ | |
271 | MX_APLLS_CLIKIN_12) | |
272 | ||
273 | #define M4_DPLL_MULT_13 (399 << 12) | |
274 | #define M4_DPLL_DIV_13 (12 << 8) | |
275 | #define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
276 | M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ | |
277 | MX_APLLS_CLIKIN_13) | |
278 | ||
279 | #define M4_DPLL_MULT_19 (145 << 12) | |
280 | #define M4_DPLL_DIV_19 (6 << 8) | |
281 | #define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
282 | M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ | |
283 | MX_APLLS_CLIKIN_19_2) | |
284 | ||
285 | /* | |
286 | * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz | |
287 | */ | |
288 | #define M3_DPLL_MULT_12 (55 << 12) | |
289 | #define M3_DPLL_DIV_12 (1 << 8) | |
290 | #define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
291 | M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ | |
292 | MX_APLLS_CLIKIN_12) | |
293 | #define M3_DPLL_MULT_13 (76 << 12) | |
294 | #define M3_DPLL_DIV_13 (2 << 8) | |
295 | #define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
296 | M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ | |
297 | MX_APLLS_CLIKIN_13) | |
298 | #define M3_DPLL_MULT_19 (17 << 12) | |
299 | #define M3_DPLL_DIV_19 (0 << 8) | |
300 | #define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
301 | M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ | |
302 | MX_APLLS_CLIKIN_19_2) | |
303 | ||
304 | /* | |
305 | * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz | |
306 | */ | |
307 | #define M2_DPLL_MULT_12 (55 << 12) | |
308 | #define M2_DPLL_DIV_12 (1 << 8) | |
309 | #define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
310 | M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ | |
311 | MX_APLLS_CLIKIN_12) | |
312 | ||
313 | /* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, | |
314 | * relock time issue */ | |
315 | /* Core frequency changed from 330/165 to 329/164 MHz*/ | |
316 | #define M2_DPLL_MULT_13 (76 << 12) | |
317 | #define M2_DPLL_DIV_13 (2 << 8) | |
318 | #define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
319 | M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ | |
320 | MX_APLLS_CLIKIN_13) | |
321 | ||
322 | #define M2_DPLL_MULT_19 (17 << 12) | |
323 | #define M2_DPLL_DIV_19 (0 << 8) | |
324 | #define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
325 | M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ | |
326 | MX_APLLS_CLIKIN_19_2) | |
327 | ||
328 | /* boot (boot) */ | |
329 | #define MB_DPLL_MULT (1 << 12) | |
330 | #define MB_DPLL_DIV (0 << 8) | |
331 | #define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
332 | MB_DPLL_DIV | MB_DPLL_MULT | \ | |
333 | MX_APLLS_CLIKIN_12) | |
334 | ||
335 | #define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
336 | MB_DPLL_DIV | MB_DPLL_MULT | \ | |
337 | MX_APLLS_CLIKIN_13) | |
338 | ||
339 | #define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
340 | MB_DPLL_DIV | MB_DPLL_MULT | \ | |
341 | MX_APLLS_CLIKIN_19) | |
342 | ||
343 | /* | |
344 | * 2430 - chassis (sedna) | |
345 | * 165 (ratio1) same as above #2 | |
346 | * 150 (ratio1) | |
347 | * 133 (ratio2) same as above #4 | |
348 | * 110 (ratio2) same as above #3 | |
349 | * 104 (ratio2) | |
350 | * boot (boot) | |
351 | */ | |
352 | ||
353 | /* PRCM I target DPLL = 2*330MHz = 660MHz */ | |
354 | #define MI_DPLL_MULT_12 (55 << 12) | |
355 | #define MI_DPLL_DIV_12 (1 << 8) | |
356 | #define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
357 | MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ | |
358 | MX_APLLS_CLIKIN_12) | |
359 | ||
360 | /* | |
361 | * 2420 Equivalent - mode registers | |
362 | * PRCM II , target DPLL = 2*300MHz = 600MHz | |
363 | */ | |
364 | #define MII_DPLL_MULT_12 (50 << 12) | |
365 | #define MII_DPLL_DIV_12 (1 << 8) | |
366 | #define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
367 | MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ | |
368 | MX_APLLS_CLIKIN_12) | |
369 | #define MII_DPLL_MULT_13 (300 << 12) | |
370 | #define MII_DPLL_DIV_13 (12 << 8) | |
371 | #define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
372 | MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ | |
373 | MX_APLLS_CLIKIN_13) | |
374 | ||
375 | /* PRCM III target DPLL = 2*266 = 532MHz*/ | |
376 | #define MIII_DPLL_MULT_12 (133 << 12) | |
377 | #define MIII_DPLL_DIV_12 (5 << 8) | |
378 | #define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
379 | MIII_DPLL_DIV_12 | \ | |
380 | MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12) | |
381 | #define MIII_DPLL_MULT_13 (266 << 12) | |
382 | #define MIII_DPLL_DIV_13 (12 << 8) | |
383 | #define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ | |
384 | MIII_DPLL_DIV_13 | \ | |
385 | MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13) | |
386 | ||
387 | /* PRCM VII (boot bypass) */ | |
388 | #define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL | |
389 | #define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL | |
390 | ||
391 | /* High and low operation value */ | |
392 | #define MX_CLKSEL2_PLL_2x_VAL (2 << 0) | |
393 | #define MX_CLKSEL2_PLL_1x_VAL (1 << 0) | |
394 | ||
395 | /* MPU speed defines */ | |
396 | #define S12M 12000000 | |
397 | #define S13M 13000000 | |
398 | #define S19M 19200000 | |
399 | #define S26M 26000000 | |
400 | #define S100M 100000000 | |
401 | #define S133M 133000000 | |
402 | #define S150M 150000000 | |
403 | #define S164M 164000000 | |
404 | #define S165M 165000000 | |
405 | #define S199M 199000000 | |
406 | #define S200M 200000000 | |
407 | #define S266M 266000000 | |
408 | #define S300M 300000000 | |
409 | #define S329M 329000000 | |
410 | #define S330M 330000000 | |
411 | #define S399M 399000000 | |
412 | #define S400M 400000000 | |
413 | #define S532M 532000000 | |
414 | #define S600M 600000000 | |
415 | #define S658M 658000000 | |
416 | #define S660M 660000000 | |
417 | #define S798M 798000000 | |
418 | ||
419 | ||
420 | extern const struct prcm_config omap2420_rate_table[]; | |
56213ca4 | 421 | |
59b479e0 | 422 | #ifdef CONFIG_SOC_OMAP2430 |
d8a94458 | 423 | extern const struct prcm_config omap2430_rate_table[]; |
56213ca4 TL |
424 | #else |
425 | #define omap2430_rate_table NULL | |
426 | #endif | |
d8a94458 PW |
427 | extern const struct prcm_config *rate_table; |
428 | extern const struct prcm_config *curr_prcm_set; | |
429 | ||
430 | #endif |