[mirror_ubuntu-bionic-kernel.git] / arch / arm / mach-orion5x / ts209-setup.c

/*
 * QNAP TS-109/TS-209 Board Setup
 *
 * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "tsx09-common.h"

#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M

/****************************************************************************
 * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
 *     partitions on the device because we want to keep compatibility with
 *     existing QNAP firmware.
 *
 * Layout as used by QNAP:
 *  [2] 0x00000000-0x00200000 : "Kernel"
 *  [3] 0x00200000-0x00600000 : "RootFS1"
 *  [4] 0x00600000-0x00700000 : "RootFS2"
 *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
 *  [5] 0x00760000-0x00780000 : "U-Boot Config"
 *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
 ***************************************************************************/
static struct mtd_partition qnap_ts209_partitions[] = {
	{
		.name		= "U-Boot",
		.size		= 0x00080000,
		.offset		= 0x00780000,
		.mask_flags	= MTD_WRITEABLE,
	}, {
		.name		= "Kernel",
		.size		= 0x00200000,
		.offset		= 0,
	}, {
		.name		= "RootFS1",
		.size		= 0x00400000,
		.offset		= 0x00200000,
	}, {
		.name		= "RootFS2",
		.size		= 0x00100000,
		.offset		= 0x00600000,
	}, {
		.name		= "U-Boot Config",
		.size		= 0x00020000,
		.offset		= 0x00760000,
	}, {
		.name		= "NAS Config",
		.size		= 0x00060000,
		.offset		= 0x00700000,
		.mask_flags	= MTD_WRITEABLE,
	},
};

static struct physmap_flash_data qnap_ts209_nor_flash_data = {
	.width		= 1,
	.parts		= qnap_ts209_partitions,
	.nr_parts	= ARRAY_SIZE(qnap_ts209_partitions)
};

static struct resource qnap_ts209_nor_flash_resource = {
	.flags	= IORESOURCE_MEM,
	.start	= QNAP_TS209_NOR_BOOT_BASE,
	.end	= QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
};

static struct platform_device qnap_ts209_nor_flash = {
	.name		= "physmap-flash",
	.id		= 0,
	.dev		= {
		.platform_data	= &qnap_ts209_nor_flash_data,
	},
	.resource	= &qnap_ts209_nor_flash_resource,
	.num_resources	= 1,
};

/*****************************************************************************
 * PCI
 ****************************************************************************/

#define QNAP_TS209_PCI_SLOT0_OFFS	7
#define QNAP_TS209_PCI_SLOT0_IRQ_PIN	6
#define QNAP_TS209_PCI_SLOT1_IRQ_PIN	7

void __init qnap_ts209_pci_preinit(void)
{
	int pin;

	/*
	 * Configure PCI GPIO IRQ pins
	 */
	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
	if (gpio_request(pin, "PCI Int1") == 0) {
		if (gpio_direction_input(pin) == 0) {
			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
		} else {
			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
					"set_irq_type pin %d\n", pin);
			gpio_free(pin);
		}
	} else {
		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
				"%d\n", pin);
	}

	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
	if (gpio_request(pin, "PCI Int2") == 0) {
		if (gpio_direction_input(pin) == 0) {
			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
		} else {
			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
					"to set_irq_type pin %d\n", pin);
			gpio_free(pin);
		}
	} else {
		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
				"%d\n", pin);
	}
}

static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
	u8 pin)
{
	int irq;

	/*
	 * Check for devices with hard-wired IRQs.
	 */
	irq = orion5x_pci_map_irq(dev, slot, pin);
	if (irq != -1)
		return irq;

	/*
	 * PCI IRQs are connected via GPIOs.
	 */
	switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
	case 0:
		return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
	case 1:
		return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
	default:
		return -1;
	}
}

static struct hw_pci qnap_ts209_pci __initdata = {
	.nr_controllers	= 2,
	.preinit	= qnap_ts209_pci_preinit,
	.setup		= orion5x_pci_sys_setup,
	.scan		= orion5x_pci_sys_scan_bus,
	.map_irq	= qnap_ts209_pci_map_irq,
};

static int __init qnap_ts209_pci_init(void)
{
	if (machine_is_ts209())
		pci_common_init(&qnap_ts209_pci);

	return 0;
}

subsys_initcall(qnap_ts209_pci_init);

/*****************************************************************************
 * RTC S35390A on I2C bus
 ****************************************************************************/

#define TS209_RTC_GPIO	3

static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
	I2C_BOARD_INFO("s35390a", 0x30),
	.irq	= 0,
};

/****************************************************************************
 * GPIO Attached Keys
 *     Power button is attached to the PIC microcontroller
 ****************************************************************************/

#define QNAP_TS209_GPIO_KEY_MEDIA	1
#define QNAP_TS209_GPIO_KEY_RESET	2

static struct gpio_keys_button qnap_ts209_buttons[] = {
	{
		.code		= KEY_COPY,
		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
		.desc		= "USB Copy Button",
		.active_low	= 1,
	}, {
		.code		= KEY_RESTART,
		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
		.desc		= "Reset Button",
		.active_low	= 1,
	},
};

static struct gpio_keys_platform_data qnap_ts209_button_data = {
	.buttons	= qnap_ts209_buttons,
	.nbuttons	= ARRAY_SIZE(qnap_ts209_buttons),
};

static struct platform_device qnap_ts209_button_device = {
	.name		= "gpio-keys",
	.id		= -1,
	.num_resources	= 0,
	.dev		= {
		.platform_data	= &qnap_ts209_button_data,
	},
};

/*****************************************************************************
 * SATA
 ****************************************************************************/
static struct mv_sata_platform_data qnap_ts209_sata_data = {
	.n_ports	= 2,
};

/*****************************************************************************

 * General Setup
 ****************************************************************************/
static unsigned int ts209_mpp_modes[] __initdata = {
	MPP0_UNUSED,
	MPP1_GPIO,		/* USB copy button */
	MPP2_GPIO,		/* Load defaults button */
	MPP3_GPIO,		/* GPIO RTC */
	MPP4_UNUSED,
	MPP5_UNUSED,
	MPP6_GPIO,		/* PCI Int A */
	MPP7_GPIO,		/* PCI Int B */
	MPP8_UNUSED,
	MPP9_UNUSED,
	MPP10_UNUSED,
	MPP11_UNUSED,
	MPP12_SATA_LED,		/* SATA 0 presence */
	MPP13_SATA_LED,		/* SATA 1 presence */
	MPP14_SATA_LED,		/* SATA 0 active */
	MPP15_SATA_LED,		/* SATA 1 active */
	MPP16_UART,		/* UART1 RXD */
	MPP17_UART,		/* UART1 TXD */
	MPP18_GPIO,		/* SW_RST */
	MPP19_UNUSED,
	0,
};

static void __init qnap_ts209_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	orion5x_mpp_conf(ts209_mpp_modes);

	/*
	 * MPP[20] PCI clock 0
	 * MPP[21] PCI clock 1
	 * MPP[22] USB 0 over current
	 * MPP[23-25] Reserved
	 */

	/*
	 * Configure peripherals.
	 */
	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
				    ORION_MBUS_DEVBUS_BOOT_ATTR,
				    QNAP_TS209_NOR_BOOT_BASE,
				    QNAP_TS209_NOR_BOOT_SIZE);
	platform_device_register(&qnap_ts209_nor_flash);

	orion5x_ehci0_init();
	orion5x_ehci1_init();
	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
				 qnap_ts209_partitions[5].offset,
				 qnap_ts209_partitions[5].size);
	orion5x_eth_init(&qnap_tsx09_eth_data);
	orion5x_i2c_init();
	orion5x_sata_init(&qnap_ts209_sata_data);
	orion5x_uart0_init();
	orion5x_uart1_init();
	orion5x_xor_init();

	platform_device_register(&qnap_ts209_button_device);

	/* Get RTC IRQ and register the chip */
	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
		if (gpio_direction_input(TS209_RTC_GPIO) == 0)
			qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
		else
			gpio_free(TS209_RTC_GPIO);
	}
	if (qnap_ts209_i2c_rtc.irq == 0)
		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);

	/* register tsx09 specific power-off method */
	pm_power_off = qnap_tsx09_power_off;
}

MACHINE_START(TS209, "QNAP TS-109/TS-209")
	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
	.atag_offset	= 0x100,
	.init_machine	= qnap_ts209_init,
	.map_io		= orion5x_map_io,
	.init_early	= orion5x_init_early,
	.init_irq	= orion5x_init_irq,
	.init_time	= orion5x_timer_init,
	.fixup		= tag_fixup_mem32,
	.restart	= orion5x_restart,
MACHINE_END
Commit	Line	Data
3faf2ee8 BB	1	/*
	2	* QNAP TS-109/TS-209 Board Setup
	3	*
	4	* Maintainer: Byron Bradley <byron.bbradley@gmail.com>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License
	8	* as published by the Free Software Foundation; either version
	9	* 2 of the License, or (at your option) any later version.
	10	*/
2f8163ba	11	#include <linux/gpio.h>
3faf2ee8 BB	12	#include <linux/kernel.h>
	13	#include <linux/init.h>
	14	#include <linux/platform_device.h>
	15	#include <linux/pci.h>
	16	#include <linux/irq.h>
	17	#include <linux/mtd/physmap.h>
	18	#include <linux/mtd/nand.h>
	19	#include <linux/mv643xx_eth.h>
	20	#include <linux/gpio_keys.h>
	21	#include <linux/input.h>
	22	#include <linux/i2c.h>
8f86dda3	23	#include <linux/serial_reg.h>
ee44391e	24	#include <linux/ata_platform.h>
3faf2ee8	25	#include <asm/mach-types.h>
3faf2ee8 BB	26	#include <asm/mach/arch.h>
3faf2ee8 BB	27	#include <asm/mach/pci.h>
a09e64fb	28	#include <mach/orion5x.h>
3faf2ee8	29	#include "common.h"
19cfd5c0	30	#include "mpp.h"
530c854a	31	#include "tsx09-common.h"
3faf2ee8 BB	32
	33	#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
	34	#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
	35
	36	/****************************************************************************
	37	* 8MiB NOR flash. The struct mtd_partition is not in the same order as the
25985edc	38	* partitions on the device because we want to keep compatibility with
3faf2ee8 BB	39	* existing QNAP firmware.
	40	*
	41	* Layout as used by QNAP:
	42	* [2] 0x00000000-0x00200000 : "Kernel"
	43	* [3] 0x00200000-0x00600000 : "RootFS1"
	44	* [4] 0x00600000-0x00700000 : "RootFS2"
	45	* [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
	46	* [5] 0x00760000-0x00780000 : "U-Boot Config"
	47	* [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
	48	***************************************************************************/
	49	static struct mtd_partition qnap_ts209_partitions[] = {
	50	{
e7068ad3 LB	51	.name = "U-Boot",
	52	.size = 0x00080000,
	53	.offset = 0x00780000,
	54	.mask_flags = MTD_WRITEABLE,
3faf2ee8	55	}, {
e7068ad3 LB	56	.name = "Kernel",
	57	.size = 0x00200000,
	58	.offset = 0,
3faf2ee8	59	}, {
e7068ad3 LB	60	.name = "RootFS1",
	61	.size = 0x00400000,
	62	.offset = 0x00200000,
3faf2ee8	63	}, {
e7068ad3 LB	64	.name = "RootFS2",
	65	.size = 0x00100000,
	66	.offset = 0x00600000,
3faf2ee8	67	}, {
e7068ad3 LB	68	.name = "U-Boot Config",
	69	.size = 0x00020000,
	70	.offset = 0x00760000,
3faf2ee8	71	}, {
e7068ad3 LB	72	.name = "NAS Config",
	73	.size = 0x00060000,
	74	.offset = 0x00700000,
	75	.mask_flags = MTD_WRITEABLE,
	76	},
3faf2ee8 BB	77	};
	78
	79	static struct physmap_flash_data qnap_ts209_nor_flash_data = {
e7068ad3 LB	80	.width = 1,
	81	.parts = qnap_ts209_partitions,
	82	.nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
3faf2ee8 BB	83	};
	84
	85	static struct resource qnap_ts209_nor_flash_resource = {
e7068ad3 LB	86	.flags = IORESOURCE_MEM,
	87	.start = QNAP_TS209_NOR_BOOT_BASE,
	88	.end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
3faf2ee8 BB	89	};
	90
	91	static struct platform_device qnap_ts209_nor_flash = {
e7068ad3 LB	92	.name = "physmap-flash",
	93	.id = 0,
	94	.dev = {
	95	.platform_data = &qnap_ts209_nor_flash_data,
	96	},
	97	.resource = &qnap_ts209_nor_flash_resource,
	98	.num_resources = 1,
3faf2ee8 BB	99	};
	100
	101	/*****************************************************************************
	102	* PCI
	103	****************************************************************************/
	104
	105	#define QNAP_TS209_PCI_SLOT0_OFFS 7
	106	#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6
	107	#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7
	108
	109	void __init qnap_ts209_pci_preinit(void)
	110	{
	111	int pin;
	112
	113	/*
	114	* Configure PCI GPIO IRQ pins
	115	*/
	116	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
	117	if (gpio_request(pin, "PCI Int1") == 0) {
	118	if (gpio_direction_input(pin) == 0) {
6845664a	119	irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
3faf2ee8 BB	120	} else {
	121	printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
	122	"set_irq_type pin %d\n", pin);
	123	gpio_free(pin);
	124	}
	125	} else {
	126	printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
	127	"%d\n", pin);
	128	}
	129
	130	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
	131	if (gpio_request(pin, "PCI Int2") == 0) {
	132	if (gpio_direction_input(pin) == 0) {
6845664a	133	irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
3faf2ee8 BB	134	} else {
	135	printk(KERN_ERR "qnap_ts209_pci_preinit failed "
	136	"to set_irq_type pin %d\n", pin);
	137	gpio_free(pin);
	138	}
	139	} else {
	140	printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
	141	"%d\n", pin);
	142	}
	143	}
	144
d5341942 RB	145	static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
d5341942 RB	146	u8 pin)
3faf2ee8	147	{
92b913b0 LB	148	int irq;
92b913b0 LB	149
3faf2ee8	150	/*
92b913b0	151	* Check for devices with hard-wired IRQs.
3faf2ee8	152	*/
92b913b0 LB	153	irq = orion5x_pci_map_irq(dev, slot, pin);
	154	if (irq != -1)
	155	return irq;
3faf2ee8 BB	156
3faf2ee8 BB	157	/*
92b913b0	158	* PCI IRQs are connected via GPIOs.
3faf2ee8 BB	159	*/
	160	switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
	161	case 0:
	162	return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
	163	case 1:
	164	return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
	165	default:
	166	return -1;
	167	}
	168	}
	169
	170	static struct hw_pci qnap_ts209_pci __initdata = {
e7068ad3 LB	171	.nr_controllers = 2,
e7068ad3 LB	172	.preinit = qnap_ts209_pci_preinit,
e7068ad3 LB	173	.setup = orion5x_pci_sys_setup,
	174	.scan = orion5x_pci_sys_scan_bus,
	175	.map_irq = qnap_ts209_pci_map_irq,
3faf2ee8 BB	176	};
	177
	178	static int __init qnap_ts209_pci_init(void)
	179	{
d22759ed	180	if (machine_is_ts209())
3faf2ee8 BB	181	pci_common_init(&qnap_ts209_pci);
	182
	183	return 0;
	184	}
	185
	186	subsys_initcall(qnap_ts209_pci_init);
	187
3faf2ee8 BB	188	/*****************************************************************************
	189	* RTC S35390A on I2C bus
	190	****************************************************************************/
59e8ce57 BB	191
	192	#define TS209_RTC_GPIO 3
	193
3faf2ee8	194	static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
3760f736	195	I2C_BOARD_INFO("s35390a", 0x30),
e7068ad3	196	.irq = 0,
3faf2ee8 BB	197	};
	198
	199	/****************************************************************************
	200	* GPIO Attached Keys
	201	* Power button is attached to the PIC microcontroller
	202	****************************************************************************/
	203
	204	#define QNAP_TS209_GPIO_KEY_MEDIA 1
	205	#define QNAP_TS209_GPIO_KEY_RESET 2
	206
	207	static struct gpio_keys_button qnap_ts209_buttons[] = {
	208	{
28ca8c80	209	.code = KEY_COPY,
3faf2ee8 BB	210	.gpio = QNAP_TS209_GPIO_KEY_MEDIA,
	211	.desc = "USB Copy Button",
	212	.active_low = 1,
e7068ad3	213	}, {
28ca8c80	214	.code = KEY_RESTART,
3faf2ee8 BB	215	.gpio = QNAP_TS209_GPIO_KEY_RESET,
	216	.desc = "Reset Button",
	217	.active_low = 1,
e7068ad3	218	},
3faf2ee8 BB	219	};
	220
	221	static struct gpio_keys_platform_data qnap_ts209_button_data = {
	222	.buttons = qnap_ts209_buttons,
e7068ad3	223	.nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
3faf2ee8 BB	224	};
	225
	226	static struct platform_device qnap_ts209_button_device = {
	227	.name = "gpio-keys",
	228	.id = -1,
	229	.num_resources = 0,
e7068ad3 LB	230	.dev = {
	231	.platform_data = &qnap_ts209_button_data,
	232	},
3faf2ee8 BB	233	};
	234
	235	/*****************************************************************************
ee44391e BB	236	* SATA
	237	****************************************************************************/
	238	static struct mv_sata_platform_data qnap_ts209_sata_data = {
e7068ad3	239	.n_ports = 2,
ee44391e BB	240	};
	241
	242	/*****************************************************************************
	243
3faf2ee8 BB	244	* General Setup
3faf2ee8 BB	245	****************************************************************************/
554cdaef AL	246	static unsigned int ts209_mpp_modes[] __initdata = {
	247	MPP0_UNUSED,
	248	MPP1_GPIO, /* USB copy button */
	249	MPP2_GPIO, /* Load defaults button */
	250	MPP3_GPIO, /* GPIO RTC */
	251	MPP4_UNUSED,
	252	MPP5_UNUSED,
	253	MPP6_GPIO, /* PCI Int A */
	254	MPP7_GPIO, /* PCI Int B */
	255	MPP8_UNUSED,
	256	MPP9_UNUSED,
	257	MPP10_UNUSED,
	258	MPP11_UNUSED,
	259	MPP12_SATA_LED, /* SATA 0 presence */
	260	MPP13_SATA_LED, /* SATA 1 presence */
	261	MPP14_SATA_LED, /* SATA 0 active */
	262	MPP15_SATA_LED, /* SATA 1 active */
	263	MPP16_UART, /* UART1 RXD */
	264	MPP17_UART, /* UART1 TXD */
	265	MPP18_GPIO, /* SW_RST */
	266	MPP19_UNUSED,
	267	0,
19cfd5c0 LB	268	};
19cfd5c0 LB	269
3faf2ee8 BB	270	static void __init qnap_ts209_init(void)
	271	{
	272	/*
	273	* Setup basic Orion functions. Need to be called early.
	274	*/
9dd0b194	275	orion5x_init();
3faf2ee8	276
19cfd5c0 LB	277	orion5x_mpp_conf(ts209_mpp_modes);
19cfd5c0 LB	278
3faf2ee8	279	/*
3faf2ee8 BB	280	* MPP[20] PCI clock 0
	281	* MPP[21] PCI clock 1
	282	* MPP[22] USB 0 over current
	283	* MPP[23-25] Reserved
	284	*/
3faf2ee8	285
044f6c7c LB	286	/*
	287	* Configure peripherals.
	288	*/
4ca2c040 TP	289	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
	290	ORION_MBUS_DEVBUS_BOOT_ATTR,
	291	QNAP_TS209_NOR_BOOT_BASE,
	292	QNAP_TS209_NOR_BOOT_SIZE);
35228e84 MM	293	platform_device_register(&qnap_ts209_nor_flash);
35228e84 MM	294
044f6c7c LB	295	orion5x_ehci0_init();
044f6c7c LB	296	orion5x_ehci1_init();
530c854a SB	297	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
	298	qnap_ts209_partitions[5].offset,
	299	qnap_ts209_partitions[5].size);
	300	orion5x_eth_init(&qnap_tsx09_eth_data);
044f6c7c LB	301	orion5x_i2c_init();
	302	orion5x_sata_init(&qnap_ts209_sata_data);
	303	orion5x_uart0_init();
e45772b2	304	orion5x_uart1_init();
1d5a1a6e	305	orion5x_xor_init();
044f6c7c	306
044f6c7c	307	platform_device_register(&qnap_ts209_button_device);
59e8ce57 BB	308
	309	/* Get RTC IRQ and register the chip */
	310	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
	311	if (gpio_direction_input(TS209_RTC_GPIO) == 0)
	312	qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
	313	else
	314	gpio_free(TS209_RTC_GPIO);
	315	}
	316	if (qnap_ts209_i2c_rtc.irq == 0)
	317	pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
3faf2ee8	318	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
59e8ce57	319
530c854a SB	320	/* register tsx09 specific power-off method */
530c854a SB	321	pm_power_off = qnap_tsx09_power_off;
3faf2ee8 BB	322	}
	323
	324	MACHINE_START(TS209, "QNAP TS-109/TS-209")
e7068ad3	325	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
65aa1b1e	326	.atag_offset = 0x100,
3faf2ee8	327	.init_machine = qnap_ts209_init,
9dd0b194	328	.map_io = orion5x_map_io,
4ee1f6b5	329	.init_early = orion5x_init_early,
9dd0b194	330	.init_irq = orion5x_init_irq,
6bb27d73	331	.init_time = orion5x_timer_init,
be73a347	332	.fixup = tag_fixup_mem32,
764cbcc2	333	.restart = orion5x_restart,
3faf2ee8	334	MACHINE_END