]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/arch/arm/mach-pxa/poodle.c | |
3 | * | |
4 | * Support for the SHARP Poodle Board. | |
5 | * | |
6 | * Based on: | |
7 | * linux/arch/arm/mach-pxa/lubbock.c Author: Nicolas Pitre | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License version 2 as | |
11 | * published by the Free Software Foundation. | |
12 | * | |
13 | * Change Log | |
14 | * 12-Dec-2002 Sharp Corporation for Poodle | |
15 | * John Lenz <lenz@cs.wisc.edu> updates to 2.6 | |
16 | */ | |
17 | #include <linux/kernel.h> | |
18 | #include <linux/init.h> | |
d052d1be | 19 | #include <linux/platform_device.h> |
1da177e4 | 20 | #include <linux/fb.h> |
74617fb6 | 21 | #include <linux/pm.h> |
88660351 | 22 | #include <linux/delay.h> |
431a2cff | 23 | #include <linux/mtd/physmap.h> |
ce529147 | 24 | #include <linux/gpio.h> |
9ee40d9a EM |
25 | #include <linux/spi/spi.h> |
26 | #include <linux/spi/ads7846.h> | |
6af7a8eb | 27 | #include <linux/mtd/sharpsl.h> |
1da177e4 | 28 | |
a09e64fb | 29 | #include <mach/hardware.h> |
1da177e4 LT |
30 | #include <asm/mach-types.h> |
31 | #include <asm/irq.h> | |
32 | #include <asm/setup.h> | |
74617fb6 | 33 | #include <asm/system.h> |
1da177e4 LT |
34 | |
35 | #include <asm/mach/arch.h> | |
36 | #include <asm/mach/map.h> | |
37 | #include <asm/mach/irq.h> | |
38 | ||
a09e64fb RK |
39 | #include <mach/pxa-regs.h> |
40 | #include <mach/pxa2xx-regs.h> | |
26b4c8dd | 41 | #include <mach/mfp-pxa25x.h> |
a09e64fb RK |
42 | #include <mach/mmc.h> |
43 | #include <mach/udc.h> | |
f8787fdc | 44 | #include <mach/i2c.h> |
a09e64fb RK |
45 | #include <mach/irda.h> |
46 | #include <mach/poodle.h> | |
47 | #include <mach/pxafb.h> | |
48 | #include <mach/sharpsl.h> | |
49 | #include <mach/ssp.h> | |
9ee40d9a | 50 | #include <mach/pxa2xx_spi.h> |
1da177e4 LT |
51 | |
52 | #include <asm/hardware/scoop.h> | |
53 | #include <asm/hardware/locomo.h> | |
54 | #include <asm/mach/sharpsl_param.h> | |
55 | ||
56 | #include "generic.h" | |
46c41e62 | 57 | #include "devices.h" |
faed5684 | 58 | #include "sharpsl.h" |
1da177e4 | 59 | |
26b4c8dd EM |
60 | static unsigned long poodle_pin_config[] __initdata = { |
61 | /* I/O */ | |
62 | GPIO79_nCS_3, | |
63 | GPIO80_nCS_4, | |
64 | GPIO18_RDY, | |
65 | ||
66 | /* Clock */ | |
67 | GPIO12_32KHz, | |
68 | ||
69 | /* SSP1 */ | |
70 | GPIO23_SSP1_SCLK, | |
26b4c8dd EM |
71 | GPIO25_SSP1_TXD, |
72 | GPIO26_SSP1_RXD, | |
9ee40d9a | 73 | GPIO24_GPIO, /* POODLE_GPIO_TP_CS - SFRM as chip select */ |
26b4c8dd EM |
74 | |
75 | /* I2S */ | |
76 | GPIO28_I2S_BITCLK_OUT, | |
77 | GPIO29_I2S_SDATA_IN, | |
78 | GPIO30_I2S_SDATA_OUT, | |
79 | GPIO31_I2S_SYNC, | |
80 | GPIO32_I2S_SYSCLK, | |
81 | ||
82 | /* Infra-Red */ | |
83 | GPIO47_FICP_TXD, | |
84 | GPIO46_FICP_RXD, | |
85 | ||
86 | /* FFUART */ | |
87 | GPIO40_FFUART_DTR, | |
88 | GPIO41_FFUART_RTS, | |
89 | GPIO39_FFUART_TXD, | |
90 | GPIO37_FFUART_DSR, | |
91 | GPIO34_FFUART_RXD, | |
92 | GPIO35_FFUART_CTS, | |
93 | ||
94 | /* LCD */ | |
95 | GPIO58_LCD_LDD_0, | |
96 | GPIO59_LCD_LDD_1, | |
97 | GPIO60_LCD_LDD_2, | |
98 | GPIO61_LCD_LDD_3, | |
99 | GPIO62_LCD_LDD_4, | |
100 | GPIO63_LCD_LDD_5, | |
101 | GPIO64_LCD_LDD_6, | |
102 | GPIO65_LCD_LDD_7, | |
103 | GPIO66_LCD_LDD_8, | |
104 | GPIO67_LCD_LDD_9, | |
105 | GPIO68_LCD_LDD_10, | |
106 | GPIO69_LCD_LDD_11, | |
107 | GPIO70_LCD_LDD_12, | |
108 | GPIO71_LCD_LDD_13, | |
109 | GPIO72_LCD_LDD_14, | |
110 | GPIO73_LCD_LDD_15, | |
111 | GPIO74_LCD_FCLK, | |
112 | GPIO75_LCD_LCLK, | |
113 | GPIO76_LCD_PCLK, | |
4fa7c24e | 114 | GPIO77_LCD_BIAS, |
26b4c8dd EM |
115 | |
116 | /* PC Card */ | |
117 | GPIO48_nPOE, | |
118 | GPIO49_nPWE, | |
119 | GPIO50_nPIOR, | |
120 | GPIO51_nPIOW, | |
121 | GPIO52_nPCE_1, | |
122 | GPIO53_nPCE_2, | |
123 | GPIO54_nPSKTSEL, | |
124 | GPIO55_nPREG, | |
125 | GPIO56_nPWAIT, | |
126 | GPIO57_nIOIS16, | |
127 | ||
128 | /* MMC */ | |
129 | GPIO6_MMC_CLK, | |
130 | GPIO8_MMC_CS0, | |
131 | ||
132 | /* GPIO */ | |
133 | GPIO9_GPIO, /* POODLE_GPIO_nSD_DETECT */ | |
134 | GPIO7_GPIO, /* POODLE_GPIO_nSD_WP */ | |
135 | GPIO3_GPIO, /* POODLE_GPIO_SD_PWR */ | |
136 | GPIO33_GPIO, /* POODLE_GPIO_SD_PWR1 */ | |
137 | ||
138 | GPIO20_GPIO, /* POODLE_GPIO_USB_PULLUP */ | |
139 | GPIO22_GPIO, /* POODLE_GPIO_IR_ON */ | |
140 | }; | |
141 | ||
1da177e4 LT |
142 | static struct resource poodle_scoop_resources[] = { |
143 | [0] = { | |
144 | .start = 0x10800000, | |
145 | .end = 0x10800fff, | |
146 | .flags = IORESOURCE_MEM, | |
147 | }, | |
148 | }; | |
149 | ||
150 | static struct scoop_config poodle_scoop_setup = { | |
151 | .io_dir = POODLE_SCOOP_IO_DIR, | |
152 | .io_out = POODLE_SCOOP_IO_OUT, | |
2d91f941 | 153 | .gpio_base = POODLE_SCOOP_GPIO_BASE, |
1da177e4 LT |
154 | }; |
155 | ||
156 | struct platform_device poodle_scoop_device = { | |
157 | .name = "sharp-scoop", | |
158 | .id = -1, | |
159 | .dev = { | |
160 | .platform_data = &poodle_scoop_setup, | |
161 | }, | |
162 | .num_resources = ARRAY_SIZE(poodle_scoop_resources), | |
163 | .resource = poodle_scoop_resources, | |
164 | }; | |
165 | ||
0ce7625f RP |
166 | static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { |
167 | { | |
168 | .dev = &poodle_scoop_device.dev, | |
169 | .irq = POODLE_IRQ_GPIO_CF_IRQ, | |
170 | .cd_irq = POODLE_IRQ_GPIO_CF_CD, | |
171 | .cd_irq_str = "PCMCIA0 CD", | |
172 | }, | |
173 | }; | |
174 | ||
a63ae442 RP |
175 | static struct scoop_pcmcia_config poodle_pcmcia_config = { |
176 | .devs = &poodle_pcmcia_scoop[0], | |
177 | .num_devs = 1, | |
a63ae442 RP |
178 | }; |
179 | ||
180 | EXPORT_SYMBOL(poodle_scoop_device); | |
181 | ||
1da177e4 LT |
182 | |
183 | /* LoCoMo device */ | |
184 | static struct resource locomo_resources[] = { | |
185 | [0] = { | |
186 | .start = 0x10000000, | |
187 | .end = 0x10001fff, | |
188 | .flags = IORESOURCE_MEM, | |
189 | }, | |
190 | [1] = { | |
191 | .start = IRQ_GPIO(10), | |
192 | .end = IRQ_GPIO(10), | |
193 | .flags = IORESOURCE_IRQ, | |
194 | }, | |
195 | }; | |
196 | ||
faed5684 | 197 | struct platform_device poodle_locomo_device = { |
1da177e4 LT |
198 | .name = "locomo", |
199 | .id = 0, | |
200 | .num_resources = ARRAY_SIZE(locomo_resources), | |
201 | .resource = locomo_resources, | |
202 | }; | |
203 | ||
faed5684 RP |
204 | EXPORT_SYMBOL(poodle_locomo_device); |
205 | ||
9ee40d9a EM |
206 | #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) |
207 | static struct pxa2xx_spi_master poodle_spi_info = { | |
208 | .num_chipselect = 1, | |
faed5684 RP |
209 | }; |
210 | ||
9ee40d9a EM |
211 | static struct ads7846_platform_data poodle_ads7846_info = { |
212 | .model = 7846, | |
213 | .vref_delay_usecs = 100, | |
214 | .x_plate_ohms = 419, | |
215 | .y_plate_ohms = 486, | |
216 | .gpio_pendown = POODLE_GPIO_TP_INT, | |
faed5684 RP |
217 | }; |
218 | ||
9ee40d9a | 219 | static void ads7846_cs(u32 command) |
faed5684 | 220 | { |
9ee40d9a | 221 | gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT)); |
faed5684 RP |
222 | } |
223 | ||
9ee40d9a EM |
224 | static struct pxa2xx_spi_chip poodle_ads7846_chip = { |
225 | .cs_control = ads7846_cs, | |
faed5684 RP |
226 | }; |
227 | ||
9ee40d9a EM |
228 | static struct spi_board_info poodle_spi_devices[] = { |
229 | { | |
230 | .modalias = "ads7846", | |
231 | .max_speed_hz = 10000, | |
232 | .bus_num = 1, | |
233 | .platform_data = &poodle_ads7846_info, | |
234 | .controller_data= &poodle_ads7846_chip, | |
235 | .irq = gpio_to_irq(POODLE_GPIO_TP_INT), | |
faed5684 | 236 | }, |
faed5684 RP |
237 | }; |
238 | ||
9ee40d9a EM |
239 | static void __init poodle_init_spi(void) |
240 | { | |
241 | int err; | |
242 | ||
243 | err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS"); | |
244 | if (err) | |
245 | return; | |
246 | ||
247 | gpio_direction_output(POODLE_GPIO_TP_CS, 1); | |
248 | ||
249 | pxa2xx_set_spi_info(1, &poodle_spi_info); | |
250 | spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices)); | |
251 | } | |
252 | #else | |
253 | static inline void poodle_init_spi(void) {} | |
254 | #endif | |
13b9d47e RP |
255 | |
256 | /* | |
257 | * MMC/SD Device | |
258 | * | |
259 | * The card detect interrupt isn't debounced so we delay it by 250ms | |
260 | * to give the card a chance to fully insert/eject. | |
261 | */ | |
262 | static struct pxamci_platform_data poodle_mci_platform_data; | |
263 | ||
40220c1a | 264 | static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data) |
13b9d47e RP |
265 | { |
266 | int err; | |
267 | ||
ce529147 EM |
268 | err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT"); |
269 | if (err) | |
270 | goto err_out; | |
271 | ||
272 | err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP"); | |
273 | if (err) | |
274 | goto err_free_1; | |
275 | ||
276 | err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR"); | |
277 | if (err) | |
278 | goto err_free_2; | |
279 | ||
280 | err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1"); | |
281 | if (err) | |
282 | goto err_free_3; | |
283 | ||
284 | gpio_direction_input(POODLE_GPIO_nSD_DETECT); | |
285 | gpio_direction_input(POODLE_GPIO_nSD_WP); | |
286 | ||
287 | gpio_direction_output(POODLE_GPIO_SD_PWR, 0); | |
288 | gpio_direction_output(POODLE_GPIO_SD_PWR1, 0); | |
13b9d47e RP |
289 | |
290 | poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); | |
291 | ||
9ded96f2 | 292 | err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, |
52e405ea | 293 | IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
9ded96f2 | 294 | "MMC card detect", data); |
ce529147 EM |
295 | if (err) { |
296 | pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n", | |
297 | __func__); | |
298 | goto err_free_4; | |
299 | } | |
300 | ||
301 | return 0; | |
13b9d47e | 302 | |
ce529147 EM |
303 | err_free_4: |
304 | gpio_free(POODLE_GPIO_SD_PWR1); | |
305 | err_free_3: | |
306 | gpio_free(POODLE_GPIO_SD_PWR); | |
307 | err_free_2: | |
308 | gpio_free(POODLE_GPIO_nSD_WP); | |
309 | err_free_1: | |
310 | gpio_free(POODLE_GPIO_nSD_DETECT); | |
311 | err_out: | |
2687bd38 | 312 | return err; |
13b9d47e RP |
313 | } |
314 | ||
315 | static void poodle_mci_setpower(struct device *dev, unsigned int vdd) | |
316 | { | |
317 | struct pxamci_platform_data* p_d = dev->platform_data; | |
318 | ||
ce529147 EM |
319 | if ((1 << vdd) & p_d->ocr_mask) { |
320 | gpio_set_value(POODLE_GPIO_SD_PWR, 1); | |
88660351 | 321 | mdelay(2); |
ce529147 | 322 | gpio_set_value(POODLE_GPIO_SD_PWR1, 1); |
88660351 | 323 | } else { |
ce529147 EM |
324 | gpio_set_value(POODLE_GPIO_SD_PWR1, 0); |
325 | gpio_set_value(POODLE_GPIO_SD_PWR, 0); | |
88660351 RP |
326 | } |
327 | } | |
328 | ||
329 | static int poodle_mci_get_ro(struct device *dev) | |
330 | { | |
ce529147 | 331 | return !!gpio_get_value(POODLE_GPIO_nSD_WP); |
88660351 | 332 | return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP); |
13b9d47e RP |
333 | } |
334 | ||
88660351 | 335 | |
13b9d47e RP |
336 | static void poodle_mci_exit(struct device *dev, void *data) |
337 | { | |
338 | free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data); | |
ce529147 EM |
339 | gpio_free(POODLE_GPIO_SD_PWR1); |
340 | gpio_free(POODLE_GPIO_SD_PWR); | |
341 | gpio_free(POODLE_GPIO_nSD_WP); | |
342 | gpio_free(POODLE_GPIO_nSD_DETECT); | |
13b9d47e RP |
343 | } |
344 | ||
345 | static struct pxamci_platform_data poodle_mci_platform_data = { | |
346 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
347 | .init = poodle_mci_init, | |
88660351 | 348 | .get_ro = poodle_mci_get_ro, |
13b9d47e RP |
349 | .setpower = poodle_mci_setpower, |
350 | .exit = poodle_mci_exit, | |
351 | }; | |
352 | ||
353 | ||
8e4b8715 RP |
354 | /* |
355 | * Irda | |
356 | */ | |
357 | static void poodle_irda_transceiver_mode(struct device *dev, int mode) | |
358 | { | |
ce529147 | 359 | gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF); |
0fc3ff31 | 360 | pxa2xx_transceiver_mode(dev, mode); |
8e4b8715 RP |
361 | } |
362 | ||
ce529147 EM |
363 | static int poodle_irda_startup(struct device *dev) |
364 | { | |
365 | int err; | |
366 | ||
367 | err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON"); | |
368 | if (err) | |
369 | return err; | |
370 | ||
371 | gpio_direction_output(POODLE_GPIO_IR_ON, 1); | |
372 | return 0; | |
373 | } | |
374 | ||
375 | static void poodle_irda_shutdown(struct device *dev) | |
376 | { | |
377 | gpio_free(POODLE_GPIO_IR_ON); | |
378 | } | |
379 | ||
8e4b8715 | 380 | static struct pxaficp_platform_data poodle_ficp_platform_data = { |
ce529147 EM |
381 | .transceiver_cap = IR_SIRMODE | IR_OFF, |
382 | .transceiver_mode = poodle_irda_transceiver_mode, | |
383 | .startup = poodle_irda_startup, | |
384 | .shutdown = poodle_irda_shutdown, | |
8e4b8715 RP |
385 | }; |
386 | ||
387 | ||
13b9d47e RP |
388 | /* |
389 | * USB Device Controller | |
390 | */ | |
13b9d47e RP |
391 | static struct pxa2xx_udc_mach_info udc_info __initdata = { |
392 | /* no connect GPIO; poodle can't tell connection status */ | |
1730aadf | 393 | .gpio_pullup = POODLE_GPIO_USB_PULLUP, |
13b9d47e RP |
394 | }; |
395 | ||
396 | ||
1da177e4 | 397 | /* PXAFB device */ |
d14b272b | 398 | static struct pxafb_mode_info poodle_fb_mode = { |
1da177e4 | 399 | .pixclock = 144700, |
1da177e4 LT |
400 | .xres = 320, |
401 | .yres = 240, | |
402 | .bpp = 16, | |
1da177e4 LT |
403 | .hsync_len = 7, |
404 | .left_margin = 11, | |
405 | .right_margin = 30, | |
1da177e4 LT |
406 | .vsync_len = 2, |
407 | .upper_margin = 2, | |
408 | .lower_margin = 0, | |
409 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
d14b272b | 410 | }; |
1da177e4 | 411 | |
d14b272b RP |
412 | static struct pxafb_mach_info poodle_fb_info = { |
413 | .modes = &poodle_fb_mode, | |
414 | .num_modes = 1, | |
cf5eb8c0 | 415 | .lcd_conn = LCD_COLOR_TFT_16BPP, |
1da177e4 LT |
416 | }; |
417 | ||
6af7a8eb DES |
418 | static struct mtd_partition sharpsl_nand_partitions[] = { |
419 | { | |
420 | .name = "System Area", | |
421 | .offset = 0, | |
422 | .size = 7 * 1024 * 1024, | |
423 | }, | |
424 | { | |
425 | .name = "Root Filesystem", | |
426 | .offset = 7 * 1024 * 1024, | |
427 | .size = 22 * 1024 * 1024, | |
428 | }, | |
429 | { | |
430 | .name = "Home Filesystem", | |
431 | .offset = MTDPART_OFS_APPEND, | |
432 | .size = MTDPART_SIZ_FULL, | |
433 | }, | |
434 | }; | |
435 | ||
436 | static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; | |
437 | ||
438 | static struct nand_bbt_descr sharpsl_bbt = { | |
439 | .options = 0, | |
440 | .offs = 4, | |
441 | .len = 2, | |
442 | .pattern = scan_ff_pattern | |
443 | }; | |
444 | ||
445 | static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { | |
446 | .badblock_pattern = &sharpsl_bbt, | |
447 | .partitions = sharpsl_nand_partitions, | |
448 | .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions), | |
449 | }; | |
450 | ||
451 | static struct resource sharpsl_nand_resources[] = { | |
452 | { | |
453 | .start = 0x0C000000, | |
454 | .end = 0x0C000FFF, | |
455 | .flags = IORESOURCE_MEM, | |
456 | }, | |
457 | }; | |
458 | ||
459 | static struct platform_device sharpsl_nand_device = { | |
460 | .name = "sharpsl-nand", | |
461 | .id = -1, | |
462 | .resource = sharpsl_nand_resources, | |
463 | .num_resources = ARRAY_SIZE(sharpsl_nand_resources), | |
464 | .dev.platform_data = &sharpsl_nand_platform_data, | |
465 | }; | |
466 | ||
431a2cff DES |
467 | static struct mtd_partition sharpsl_rom_parts[] = { |
468 | { | |
469 | .name ="Boot PROM Filesystem", | |
470 | .offset = 0x00120000, | |
471 | .size = MTDPART_SIZ_FULL, | |
472 | }, | |
473 | }; | |
474 | ||
475 | static struct physmap_flash_data sharpsl_rom_data = { | |
476 | .width = 2, | |
477 | .nr_parts = ARRAY_SIZE(sharpsl_rom_parts), | |
478 | .parts = sharpsl_rom_parts, | |
479 | }; | |
480 | ||
481 | static struct resource sharpsl_rom_resources[] = { | |
482 | { | |
483 | .start = 0x00000000, | |
484 | .end = 0x007fffff, | |
485 | .flags = IORESOURCE_MEM, | |
486 | }, | |
487 | }; | |
488 | ||
489 | static struct platform_device sharpsl_rom_device = { | |
490 | .name = "physmap-flash", | |
491 | .id = -1, | |
492 | .resource = sharpsl_rom_resources, | |
493 | .num_resources = ARRAY_SIZE(sharpsl_rom_resources), | |
494 | .dev.platform_data = &sharpsl_rom_data, | |
495 | }; | |
496 | ||
1da177e4 | 497 | static struct platform_device *devices[] __initdata = { |
faed5684 | 498 | &poodle_locomo_device, |
1da177e4 | 499 | &poodle_scoop_device, |
6af7a8eb | 500 | &sharpsl_nand_device, |
431a2cff | 501 | &sharpsl_rom_device, |
1da177e4 LT |
502 | }; |
503 | ||
74617fb6 RP |
504 | static void poodle_poweroff(void) |
505 | { | |
74617fb6 RP |
506 | arm_machine_restart('h'); |
507 | } | |
508 | ||
509 | static void poodle_restart(char mode) | |
510 | { | |
74617fb6 RP |
511 | arm_machine_restart('h'); |
512 | } | |
513 | ||
1da177e4 LT |
514 | static void __init poodle_init(void) |
515 | { | |
516 | int ret = 0; | |
517 | ||
74617fb6 RP |
518 | pm_power_off = poodle_poweroff; |
519 | arm_pm_restart = poodle_restart; | |
520 | ||
f29d2455 RP |
521 | PCFR |= PCFR_OPDE; |
522 | ||
26b4c8dd | 523 | pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config)); |
1da177e4 | 524 | |
2b0defd4 | 525 | platform_scoop_config = &poodle_pcmcia_config; |
2b0defd4 EM |
526 | |
527 | ret = platform_add_devices(devices, ARRAY_SIZE(devices)); | |
528 | if (ret) | |
529 | pr_warning("poodle: Unable to register LoCoMo device\n"); | |
530 | ||
faed5684 | 531 | set_pxa_fb_parent(&poodle_locomo_device.dev); |
1da177e4 | 532 | set_pxa_fb_info(&poodle_fb_info); |
13b9d47e RP |
533 | pxa_set_udc_info(&udc_info); |
534 | pxa_set_mci_info(&poodle_mci_platform_data); | |
8e4b8715 | 535 | pxa_set_ficp_info(&poodle_ficp_platform_data); |
f8787fdc | 536 | pxa_set_i2c_info(NULL); |
9ee40d9a | 537 | poodle_init_spi(); |
1da177e4 LT |
538 | } |
539 | ||
540 | static void __init fixup_poodle(struct machine_desc *desc, | |
541 | struct tag *tags, char **cmdline, struct meminfo *mi) | |
542 | { | |
543 | sharpsl_save_param(); | |
b2e6f755 RP |
544 | mi->nr_banks=1; |
545 | mi->bank[0].start = 0xa0000000; | |
546 | mi->bank[0].node = 0; | |
547 | mi->bank[0].size = (32*1024*1024); | |
1da177e4 LT |
548 | } |
549 | ||
1da177e4 | 550 | MACHINE_START(POODLE, "SHARP Poodle") |
e9dea0c6 | 551 | .phys_io = 0x40000000, |
68070bde | 552 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
e9dea0c6 | 553 | .fixup = fixup_poodle, |
f29d2455 | 554 | .map_io = pxa_map_io, |
cd49104d | 555 | .init_irq = pxa25x_init_irq, |
e9dea0c6 RK |
556 | .timer = &pxa_timer, |
557 | .init_machine = poodle_init, | |
1da177e4 | 558 | MACHINE_END |