]>
Commit | Line | Data |
---|---|---|
2c8086a5 | 1 | /* |
2 | * linux/arch/arm/mach-pxa/pxa3xx.c | |
3 | * | |
4 | * code specific to pxa3xx aka Monahans | |
5 | * | |
6 | * Copyright (C) 2006 Marvell International Ltd. | |
7 | * | |
e9bba8ee | 8 | * 2007-09-02: eric miao <eric.miao@marvell.com> |
2c8086a5 | 9 | * initial version |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License version 2 as | |
13 | * published by the Free Software Foundation. | |
14 | */ | |
2c8086a5 | 15 | #include <linux/module.h> |
16 | #include <linux/kernel.h> | |
17 | #include <linux/init.h> | |
18 | #include <linux/pm.h> | |
19 | #include <linux/platform_device.h> | |
20 | #include <linux/irq.h> | |
7b5dea12 | 21 | #include <linux/io.h> |
2eaa03b5 | 22 | #include <linux/syscore_ops.h> |
b459396e | 23 | #include <linux/i2c/pxa-i2c.h> |
2c8086a5 | 24 | |
851982c1 | 25 | #include <asm/mach/map.h> |
2c74a0ce | 26 | #include <asm/suspend.h> |
a09e64fb RK |
27 | #include <mach/hardware.h> |
28 | #include <mach/pxa3xx-regs.h> | |
afd2fc02 | 29 | #include <mach/reset.h> |
293b2da1 | 30 | #include <linux/platform_data/usb-ohci-pxa27x.h> |
a09e64fb RK |
31 | #include <mach/pm.h> |
32 | #include <mach/dma.h> | |
ad68bb9f | 33 | #include <mach/smemc.h> |
4e611091 | 34 | #include <mach/irqs.h> |
2c8086a5 | 35 | |
36 | #include "generic.h" | |
37 | #include "devices.h" | |
38 | #include "clock.h" | |
39 | ||
bf293aec MR |
40 | #define PECR_IE(n) ((1 << ((n) * 2)) << 28) |
41 | #define PECR_IS(n) ((1 << ((n) * 2)) << 29) | |
42 | ||
8c3abc7d RK |
43 | static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1); |
44 | static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1); | |
45 | static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1); | |
46 | static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0); | |
47 | static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5); | |
48 | static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0); | |
e68750ae | 49 | static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0); |
8c3abc7d RK |
50 | static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0); |
51 | static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0); | |
52 | static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0); | |
53 | static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0); | |
54 | static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0); | |
55 | static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0); | |
56 | static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0); | |
57 | static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0); | |
58 | static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); | |
389eda15 | 59 | static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0); |
8c3abc7d | 60 | |
2e8581e7 | 61 | static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops); |
c085052b | 62 | static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops); |
2e8581e7 EM |
63 | static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops); |
64 | static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops); | |
4029813c | 65 | static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70); |
2e8581e7 | 66 | |
8c3abc7d RK |
67 | static struct clk_lookup pxa3xx_clkregs[] = { |
68 | INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), | |
69 | /* Power I2C clock is always on */ | |
5c68b099 | 70 | INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), |
8c3abc7d RK |
71 | INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), |
72 | INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), | |
73 | INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), | |
74 | INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL), | |
75 | INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL), | |
76 | INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL), | |
77 | INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"), | |
78 | INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL), | |
79 | INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL), | |
80 | INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL), | |
69f22be7 | 81 | INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL), |
8c3abc7d RK |
82 | INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL), |
83 | INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL), | |
84 | INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL), | |
85 | INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL), | |
86 | INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL), | |
87 | INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL), | |
88 | INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL), | |
89 | INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), | |
90 | INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), | |
c085052b | 91 | INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), |
389eda15 | 92 | INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL), |
3e12ec77 | 93 | INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), |
2c8086a5 | 94 | }; |
95 | ||
7b5dea12 | 96 | #ifdef CONFIG_PM |
7b5dea12 RK |
97 | |
98 | #define ISRAM_START 0x5c000000 | |
99 | #define ISRAM_SIZE SZ_256K | |
100 | ||
101 | static void __iomem *sram; | |
102 | static unsigned long wakeup_src; | |
103 | ||
7b5dea12 RK |
104 | /* |
105 | * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic | |
106 | * memory controller has to be reinitialised, so we place some code | |
107 | * in the SRAM to perform this function. | |
108 | * | |
109 | * We disable FIQs across the standby - otherwise, we might receive a | |
110 | * FIQ while the SDRAM is unavailable. | |
111 | */ | |
112 | static void pxa3xx_cpu_standby(unsigned int pwrmode) | |
113 | { | |
114 | extern const char pm_enter_standby_start[], pm_enter_standby_end[]; | |
115 | void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); | |
116 | ||
117 | memcpy_toio(sram + 0x8000, pm_enter_standby_start, | |
118 | pm_enter_standby_end - pm_enter_standby_start); | |
119 | ||
120 | AD2D0SR = ~0; | |
121 | AD2D1SR = ~0; | |
122 | AD2D0ER = wakeup_src; | |
123 | AD2D1ER = 0; | |
124 | ASCR = ASCR; | |
125 | ARSR = ARSR; | |
126 | ||
127 | local_fiq_disable(); | |
128 | fn(pwrmode); | |
129 | local_fiq_enable(); | |
130 | ||
131 | AD2D0ER = 0; | |
132 | AD2D1ER = 0; | |
7b5dea12 RK |
133 | } |
134 | ||
c4d1fb62 | 135 | /* |
136 | * NOTE: currently, the OBM (OEM Boot Module) binary comes along with | |
137 | * PXA3xx development kits assumes that the resuming process continues | |
138 | * with the address stored within the first 4 bytes of SDRAM. The PSPR | |
139 | * register is used privately by BootROM and OBM, and _must_ be set to | |
140 | * 0x5c014000 for the moment. | |
141 | */ | |
142 | static void pxa3xx_cpu_pm_suspend(void) | |
143 | { | |
144 | volatile unsigned long *p = (volatile void *)0xc0000000; | |
145 | unsigned long saved_data = *p; | |
a9503d21 RK |
146 | #ifndef CONFIG_IWMMXT |
147 | u64 acc0; | |
c4d1fb62 | 148 | |
a9503d21 RK |
149 | asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); |
150 | #endif | |
151 | ||
29cb3cd2 | 152 | extern int pxa3xx_finish_suspend(unsigned long); |
c4d1fb62 | 153 | |
154 | /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ | |
155 | CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); | |
156 | CKENB |= 1 << (CKEN_HSIO2 & 0x1f); | |
157 | ||
158 | /* clear and setup wakeup source */ | |
159 | AD3SR = ~0; | |
160 | AD3ER = wakeup_src; | |
161 | ASCR = ASCR; | |
162 | ARSR = ARSR; | |
163 | ||
164 | PCFR |= (1u << 13); /* L1_DIS */ | |
165 | PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */ | |
166 | ||
167 | PSPR = 0x5c014000; | |
168 | ||
169 | /* overwrite with the resume address */ | |
4f5ad99b | 170 | *p = virt_to_phys(cpu_resume); |
c4d1fb62 | 171 | |
2c74a0ce | 172 | cpu_suspend(0, pxa3xx_finish_suspend); |
c4d1fb62 | 173 | |
174 | *p = saved_data; | |
175 | ||
176 | AD3ER = 0; | |
a9503d21 RK |
177 | |
178 | #ifndef CONFIG_IWMMXT | |
179 | asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); | |
180 | #endif | |
c4d1fb62 | 181 | } |
182 | ||
7b5dea12 RK |
183 | static void pxa3xx_cpu_pm_enter(suspend_state_t state) |
184 | { | |
185 | /* | |
186 | * Don't sleep if no wakeup sources are defined | |
187 | */ | |
b86a5da8 MB |
188 | if (wakeup_src == 0) { |
189 | printk(KERN_ERR "Not suspending: no wakeup sources\n"); | |
7b5dea12 | 190 | return; |
b86a5da8 | 191 | } |
7b5dea12 RK |
192 | |
193 | switch (state) { | |
194 | case PM_SUSPEND_STANDBY: | |
195 | pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2); | |
196 | break; | |
197 | ||
198 | case PM_SUSPEND_MEM: | |
c4d1fb62 | 199 | pxa3xx_cpu_pm_suspend(); |
7b5dea12 RK |
200 | break; |
201 | } | |
202 | } | |
203 | ||
204 | static int pxa3xx_cpu_pm_valid(suspend_state_t state) | |
205 | { | |
206 | return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; | |
207 | } | |
208 | ||
209 | static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = { | |
7b5dea12 RK |
210 | .valid = pxa3xx_cpu_pm_valid, |
211 | .enter = pxa3xx_cpu_pm_enter, | |
2c8086a5 | 212 | }; |
213 | ||
7b5dea12 RK |
214 | static void __init pxa3xx_init_pm(void) |
215 | { | |
216 | sram = ioremap(ISRAM_START, ISRAM_SIZE); | |
217 | if (!sram) { | |
218 | printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n"); | |
219 | return; | |
220 | } | |
221 | ||
222 | /* | |
223 | * Since we copy wakeup code into the SRAM, we need to ensure | |
224 | * that it is preserved over the low power modes. Note: bit 8 | |
225 | * is undocumented in the developer manual, but must be set. | |
226 | */ | |
227 | AD1R |= ADXR_L2 | ADXR_R0; | |
228 | AD2R |= ADXR_L2 | ADXR_R0; | |
229 | AD3R |= ADXR_L2 | ADXR_R0; | |
230 | ||
231 | /* | |
232 | * Clear the resume enable registers. | |
233 | */ | |
234 | AD1D0ER = 0; | |
235 | AD2D0ER = 0; | |
236 | AD2D1ER = 0; | |
237 | AD3ER = 0; | |
238 | ||
239 | pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns; | |
240 | } | |
241 | ||
a3f4c927 | 242 | static int pxa3xx_set_wake(struct irq_data *d, unsigned int on) |
7b5dea12 RK |
243 | { |
244 | unsigned long flags, mask = 0; | |
245 | ||
a3f4c927 | 246 | switch (d->irq) { |
7b5dea12 RK |
247 | case IRQ_SSP3: |
248 | mask = ADXER_MFP_WSSP3; | |
249 | break; | |
250 | case IRQ_MSL: | |
251 | mask = ADXER_WMSL0; | |
252 | break; | |
253 | case IRQ_USBH2: | |
254 | case IRQ_USBH1: | |
255 | mask = ADXER_WUSBH; | |
256 | break; | |
257 | case IRQ_KEYPAD: | |
258 | mask = ADXER_WKP; | |
259 | break; | |
260 | case IRQ_AC97: | |
261 | mask = ADXER_MFP_WAC97; | |
262 | break; | |
263 | case IRQ_USIM: | |
264 | mask = ADXER_WUSIM0; | |
265 | break; | |
266 | case IRQ_SSP2: | |
267 | mask = ADXER_MFP_WSSP2; | |
268 | break; | |
269 | case IRQ_I2C: | |
270 | mask = ADXER_MFP_WI2C; | |
271 | break; | |
272 | case IRQ_STUART: | |
273 | mask = ADXER_MFP_WUART3; | |
274 | break; | |
275 | case IRQ_BTUART: | |
276 | mask = ADXER_MFP_WUART2; | |
277 | break; | |
278 | case IRQ_FFUART: | |
279 | mask = ADXER_MFP_WUART1; | |
280 | break; | |
281 | case IRQ_MMC: | |
282 | mask = ADXER_MFP_WMMC1; | |
283 | break; | |
284 | case IRQ_SSP: | |
285 | mask = ADXER_MFP_WSSP1; | |
286 | break; | |
287 | case IRQ_RTCAlrm: | |
288 | mask = ADXER_WRTC; | |
289 | break; | |
290 | case IRQ_SSP4: | |
291 | mask = ADXER_MFP_WSSP4; | |
292 | break; | |
293 | case IRQ_TSI: | |
294 | mask = ADXER_WTSI; | |
295 | break; | |
296 | case IRQ_USIM2: | |
297 | mask = ADXER_WUSIM1; | |
298 | break; | |
299 | case IRQ_MMC2: | |
300 | mask = ADXER_MFP_WMMC2; | |
301 | break; | |
302 | case IRQ_NAND: | |
303 | mask = ADXER_MFP_WFLASH; | |
304 | break; | |
305 | case IRQ_USB2: | |
306 | mask = ADXER_WUSB2; | |
307 | break; | |
308 | case IRQ_WAKEUP0: | |
309 | mask = ADXER_WEXTWAKE0; | |
310 | break; | |
311 | case IRQ_WAKEUP1: | |
312 | mask = ADXER_WEXTWAKE1; | |
313 | break; | |
314 | case IRQ_MMC3: | |
315 | mask = ADXER_MFP_GEN12; | |
316 | break; | |
e1217707 MB |
317 | default: |
318 | return -EINVAL; | |
7b5dea12 RK |
319 | } |
320 | ||
321 | local_irq_save(flags); | |
322 | if (on) | |
323 | wakeup_src |= mask; | |
324 | else | |
325 | wakeup_src &= ~mask; | |
326 | local_irq_restore(flags); | |
327 | ||
328 | return 0; | |
329 | } | |
7b5dea12 RK |
330 | #else |
331 | static inline void pxa3xx_init_pm(void) {} | |
b9e25ace | 332 | #define pxa3xx_set_wake NULL |
7b5dea12 RK |
333 | #endif |
334 | ||
a3f4c927 | 335 | static void pxa_ack_ext_wakeup(struct irq_data *d) |
bf293aec | 336 | { |
a3f4c927 | 337 | PECR |= PECR_IS(d->irq - IRQ_WAKEUP0); |
bf293aec MR |
338 | } |
339 | ||
a3f4c927 | 340 | static void pxa_mask_ext_wakeup(struct irq_data *d) |
bf293aec | 341 | { |
5d284e35 | 342 | pxa_mask_irq(d); |
a3f4c927 | 343 | PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0); |
bf293aec MR |
344 | } |
345 | ||
a3f4c927 | 346 | static void pxa_unmask_ext_wakeup(struct irq_data *d) |
bf293aec | 347 | { |
5d284e35 | 348 | pxa_unmask_irq(d); |
a3f4c927 | 349 | PECR |= PECR_IE(d->irq - IRQ_WAKEUP0); |
bf293aec MR |
350 | } |
351 | ||
a3f4c927 | 352 | static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type) |
12882096 IG |
353 | { |
354 | if (flow_type & IRQ_TYPE_EDGE_RISING) | |
a3f4c927 | 355 | PWER |= 1 << (d->irq - IRQ_WAKEUP0); |
12882096 IG |
356 | |
357 | if (flow_type & IRQ_TYPE_EDGE_FALLING) | |
a3f4c927 | 358 | PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2); |
12882096 IG |
359 | |
360 | return 0; | |
361 | } | |
362 | ||
bf293aec MR |
363 | static struct irq_chip pxa_ext_wakeup_chip = { |
364 | .name = "WAKEUP", | |
a3f4c927 LB |
365 | .irq_ack = pxa_ack_ext_wakeup, |
366 | .irq_mask = pxa_mask_ext_wakeup, | |
367 | .irq_unmask = pxa_unmask_ext_wakeup, | |
368 | .irq_set_type = pxa_set_ext_wakeup_type, | |
bf293aec MR |
369 | }; |
370 | ||
157d2644 HZ |
371 | static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *, |
372 | unsigned int)) | |
bf293aec MR |
373 | { |
374 | int irq; | |
375 | ||
376 | for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) { | |
f38c02f3 TG |
377 | irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip, |
378 | handle_edge_irq); | |
bf293aec MR |
379 | set_irq_flags(irq, IRQF_VALID); |
380 | } | |
381 | ||
a3f4c927 | 382 | pxa_ext_wakeup_chip.irq_set_wake = fn; |
bf293aec MR |
383 | } |
384 | ||
2c8086a5 | 385 | void __init pxa3xx_init_irq(void) |
386 | { | |
387 | /* enable CP6 access */ | |
388 | u32 value; | |
389 | __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value)); | |
390 | value |= (1 << 6); | |
391 | __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); | |
392 | ||
b9e25ace | 393 | pxa_init_irq(56, pxa3xx_set_wake); |
bf293aec | 394 | pxa_init_ext_wakeup_irq(pxa3xx_set_wake); |
2c8086a5 | 395 | } |
396 | ||
851982c1 MV |
397 | static struct map_desc pxa3xx_io_desc[] __initdata = { |
398 | { /* Mem Ctl */ | |
97b09da4 | 399 | .virtual = (unsigned long)SMEMC_VIRT, |
ad68bb9f | 400 | .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE), |
851982c1 MV |
401 | .length = 0x00200000, |
402 | .type = MT_DEVICE | |
403 | } | |
404 | }; | |
405 | ||
406 | void __init pxa3xx_map_io(void) | |
407 | { | |
408 | pxa_map_io(); | |
409 | iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc)); | |
410 | pxa3xx_get_clk_frequency_khz(1); | |
411 | } | |
412 | ||
2c8086a5 | 413 | /* |
414 | * device registration specific to PXA3xx. | |
415 | */ | |
416 | ||
9ba63c4f MR |
417 | void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) |
418 | { | |
14758220 | 419 | pxa_register_device(&pxa3xx_device_i2c_power, info); |
9ba63c4f MR |
420 | } |
421 | ||
2c8086a5 | 422 | static struct platform_device *devices[] __initdata = { |
157d2644 | 423 | &pxa_device_gpio, |
94c35a6b | 424 | &pxa27x_device_udc, |
09a5358d | 425 | &pxa_device_pmu, |
2c8086a5 | 426 | &pxa_device_i2s, |
f0fba2ad LG |
427 | &pxa_device_asoc_ssp1, |
428 | &pxa_device_asoc_ssp2, | |
429 | &pxa_device_asoc_ssp3, | |
430 | &pxa_device_asoc_ssp4, | |
431 | &pxa_device_asoc_platform, | |
72493146 | 432 | &sa1100_device_rtc, |
2c8086a5 | 433 | &pxa_device_rtc, |
d8e0db11 | 434 | &pxa27x_device_ssp1, |
435 | &pxa27x_device_ssp2, | |
436 | &pxa27x_device_ssp3, | |
437 | &pxa3xx_device_ssp4, | |
75540c1a | 438 | &pxa27x_device_pwm0, |
439 | &pxa27x_device_pwm1, | |
2c8086a5 | 440 | }; |
441 | ||
442 | static int __init pxa3xx_init(void) | |
443 | { | |
2eaa03b5 | 444 | int ret = 0; |
2c8086a5 | 445 | |
446 | if (cpu_is_pxa3xx()) { | |
04fef228 EM |
447 | |
448 | reset_status = ARSR; | |
449 | ||
86260f98 DK |
450 | /* |
451 | * clear RDH bit every time after reset | |
452 | * | |
453 | * Note: the last 3 bits DxS are write-1-to-clear so carefully | |
454 | * preserve them here in case they will be referenced later | |
455 | */ | |
456 | ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); | |
457 | ||
0a0300dc | 458 | clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs)); |
2c8086a5 | 459 | |
fef1f99a | 460 | if ((ret = pxa_init_dma(IRQ_DMA, 32))) |
2c8086a5 | 461 | return ret; |
462 | ||
7b5dea12 RK |
463 | pxa3xx_init_pm(); |
464 | ||
2eaa03b5 RW |
465 | register_syscore_ops(&pxa_irq_syscore_ops); |
466 | register_syscore_ops(&pxa3xx_mfp_syscore_ops); | |
2eaa03b5 | 467 | register_syscore_ops(&pxa3xx_clock_syscore_ops); |
c0165504 | 468 | |
469 | ret = platform_add_devices(devices, ARRAY_SIZE(devices)); | |
2c8086a5 | 470 | } |
c0165504 | 471 | |
472 | return ret; | |
2c8086a5 | 473 | } |
474 | ||
1c104e0e | 475 | postcore_initcall(pxa3xx_init); |