]>
Commit | Line | Data |
---|---|---|
d2912cb1 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
543cd842 M |
2 | /* |
3 | * Hardware definitions for Voipac PXA270 | |
4 | * | |
5 | * Copyright (C) 2010 | |
6 | * Marek Vasut <marek.vasut@gmail.com> | |
543cd842 M |
7 | */ |
8 | ||
9 | #include <linux/platform_device.h> | |
10 | #include <linux/delay.h> | |
11 | #include <linux/irq.h> | |
12 | #include <linux/gpio_keys.h> | |
13 | #include <linux/input.h> | |
40d727a2 | 14 | #include <linux/leds.h> |
543cd842 | 15 | #include <linux/gpio.h> |
32d15448 | 16 | #include <linux/gpio/machine.h> |
543cd842 M |
17 | #include <linux/mtd/mtd.h> |
18 | #include <linux/mtd/partitions.h> | |
19 | #include <linux/mtd/physmap.h> | |
bcc399bb | 20 | #include <linux/mtd/onenand.h> |
947fb57e | 21 | #include <linux/dm9000.h> |
1a8fb70e | 22 | #include <linux/ucb1400.h> |
052345ae | 23 | #include <linux/ata_platform.h> |
a927ef89 | 24 | #include <linux/regulator/machine.h> |
54e70bff | 25 | #include <linux/regulator/max1586.h> |
f15fc9b1 | 26 | #include <linux/platform_data/i2c-pxa.h> |
543cd842 M |
27 | |
28 | #include <asm/mach-types.h> | |
29 | #include <asm/mach/arch.h> | |
30 | ||
4c25c5d2 | 31 | #include "pxa27x.h" |
1a8fb70e | 32 | #include <mach/audio.h> |
543cd842 | 33 | #include <mach/vpac270.h> |
293b2da1 AB |
34 | #include <linux/platform_data/mmc-pxamci.h> |
35 | #include <linux/platform_data/video-pxafb.h> | |
36 | #include <linux/platform_data/usb-ohci-pxa27x.h> | |
4c25c5d2 AB |
37 | #include "pxa27x-udc.h" |
38 | #include "udc.h" | |
293b2da1 | 39 | #include <linux/platform_data/ata-pxa.h> |
543cd842 M |
40 | |
41 | #include "generic.h" | |
42 | #include "devices.h" | |
43 | ||
44 | /****************************************************************************** | |
45 | * Pin configuration | |
46 | ******************************************************************************/ | |
47 | static unsigned long vpac270_pin_config[] __initdata = { | |
48 | /* MMC */ | |
49 | GPIO32_MMC_CLK, | |
50 | GPIO92_MMC_DAT_0, | |
51 | GPIO109_MMC_DAT_1, | |
52 | GPIO110_MMC_DAT_2, | |
53 | GPIO111_MMC_DAT_3, | |
54 | GPIO112_MMC_CMD, | |
55 | GPIO53_GPIO, /* SD detect */ | |
56 | GPIO52_GPIO, /* SD r/o switch */ | |
57 | ||
58 | /* GPIO KEYS */ | |
59 | GPIO1_GPIO, /* USER BTN */ | |
60 | ||
61 | /* LEDs */ | |
62 | GPIO15_GPIO, /* orange led */ | |
63 | ||
64 | /* FFUART */ | |
65 | GPIO34_FFUART_RXD, | |
66 | GPIO39_FFUART_TXD, | |
67 | GPIO27_FFUART_RTS, | |
68 | GPIO100_FFUART_CTS, | |
69 | GPIO33_FFUART_DSR, | |
70 | GPIO40_FFUART_DTR, | |
71 | GPIO10_FFUART_DCD, | |
72 | GPIO38_FFUART_RI, | |
73 | ||
74 | /* LCD */ | |
75 | GPIO58_LCD_LDD_0, | |
76 | GPIO59_LCD_LDD_1, | |
77 | GPIO60_LCD_LDD_2, | |
78 | GPIO61_LCD_LDD_3, | |
79 | GPIO62_LCD_LDD_4, | |
80 | GPIO63_LCD_LDD_5, | |
81 | GPIO64_LCD_LDD_6, | |
82 | GPIO65_LCD_LDD_7, | |
83 | GPIO66_LCD_LDD_8, | |
84 | GPIO67_LCD_LDD_9, | |
85 | GPIO68_LCD_LDD_10, | |
86 | GPIO69_LCD_LDD_11, | |
87 | GPIO70_LCD_LDD_12, | |
88 | GPIO71_LCD_LDD_13, | |
89 | GPIO72_LCD_LDD_14, | |
90 | GPIO73_LCD_LDD_15, | |
91 | GPIO86_LCD_LDD_16, | |
92 | GPIO87_LCD_LDD_17, | |
93 | GPIO74_LCD_FCLK, | |
94 | GPIO75_LCD_LCLK, | |
95 | GPIO76_LCD_PCLK, | |
96 | GPIO77_LCD_BIAS, | |
addff0fa MV |
97 | |
98 | /* PCMCIA */ | |
99 | GPIO48_nPOE, | |
100 | GPIO49_nPWE, | |
101 | GPIO50_nPIOR, | |
102 | GPIO51_nPIOW, | |
103 | GPIO85_nPCE_1, | |
104 | GPIO54_nPCE_2, | |
105 | GPIO55_nPREG, | |
106 | GPIO57_nIOIS16, | |
107 | GPIO56_nPWAIT, | |
108 | GPIO104_PSKTSEL, | |
109 | GPIO84_GPIO, /* PCMCIA CD */ | |
110 | GPIO35_GPIO, /* PCMCIA RDY */ | |
111 | GPIO107_GPIO, /* PCMCIA PPEN */ | |
112 | GPIO11_GPIO, /* PCMCIA RESET */ | |
113 | GPIO17_GPIO, /* CF CD */ | |
114 | GPIO12_GPIO, /* CF RDY */ | |
115 | GPIO16_GPIO, /* CF RESET */ | |
116 | ||
3d98f881 MV |
117 | /* UHC */ |
118 | GPIO88_USBH1_PWR, | |
119 | GPIO89_USBH1_PEN, | |
120 | GPIO119_USBH2_PWR, | |
121 | GPIO120_USBH2_PEN, | |
122 | ||
123 | /* UDC */ | |
124 | GPIO41_GPIO, | |
947fb57e MV |
125 | |
126 | /* Ethernet */ | |
127 | GPIO114_GPIO, /* IRQ */ | |
1a8fb70e MV |
128 | |
129 | /* AC97 */ | |
130 | GPIO28_AC97_BITCLK, | |
131 | GPIO29_AC97_SDATA_IN_0, | |
132 | GPIO30_AC97_SDATA_OUT, | |
133 | GPIO31_AC97_SYNC, | |
134 | GPIO95_AC97_nRESET, | |
135 | GPIO98_AC97_SYSCLK, | |
136 | GPIO113_GPIO, /* TS IRQ */ | |
83a4a102 MV |
137 | |
138 | /* I2C */ | |
139 | GPIO117_I2C_SCL, | |
140 | GPIO118_I2C_SDA, | |
052345ae MV |
141 | |
142 | /* IDE */ | |
143 | GPIO36_GPIO, /* IDE IRQ */ | |
144 | GPIO80_DREQ_1, | |
543cd842 M |
145 | }; |
146 | ||
147 | /****************************************************************************** | |
148 | * NOR Flash | |
149 | ******************************************************************************/ | |
150 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
bcc399bb | 151 | static struct mtd_partition vpac270_nor_partitions[] = { |
543cd842 M |
152 | { |
153 | .name = "Flash", | |
154 | .offset = 0x00000000, | |
155 | .size = MTDPART_SIZ_FULL, | |
156 | } | |
157 | }; | |
158 | ||
159 | static struct physmap_flash_data vpac270_flash_data[] = { | |
160 | { | |
161 | .width = 2, /* bankwidth in bytes */ | |
bcc399bb MV |
162 | .parts = vpac270_nor_partitions, |
163 | .nr_parts = ARRAY_SIZE(vpac270_nor_partitions) | |
543cd842 M |
164 | } |
165 | }; | |
166 | ||
167 | static struct resource vpac270_flash_resource = { | |
168 | .start = PXA_CS0_PHYS, | |
169 | .end = PXA_CS0_PHYS + SZ_64M - 1, | |
170 | .flags = IORESOURCE_MEM, | |
171 | }; | |
172 | ||
173 | static struct platform_device vpac270_flash = { | |
174 | .name = "physmap-flash", | |
175 | .id = 0, | |
176 | .resource = &vpac270_flash_resource, | |
177 | .num_resources = 1, | |
178 | .dev = { | |
179 | .platform_data = vpac270_flash_data, | |
180 | }, | |
181 | }; | |
182 | static void __init vpac270_nor_init(void) | |
183 | { | |
184 | platform_device_register(&vpac270_flash); | |
185 | } | |
186 | #else | |
187 | static inline void vpac270_nor_init(void) {} | |
188 | #endif | |
189 | ||
bcc399bb MV |
190 | /****************************************************************************** |
191 | * OneNAND Flash | |
192 | ******************************************************************************/ | |
193 | #if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE) | |
194 | static struct mtd_partition vpac270_onenand_partitions[] = { | |
195 | { | |
196 | .name = "Flash", | |
197 | .offset = 0x00000000, | |
198 | .size = MTDPART_SIZ_FULL, | |
199 | } | |
200 | }; | |
201 | ||
202 | static struct onenand_platform_data vpac270_onenand_info = { | |
203 | .parts = vpac270_onenand_partitions, | |
204 | .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions), | |
205 | }; | |
206 | ||
207 | static struct resource vpac270_onenand_resources[] = { | |
208 | [0] = { | |
209 | .start = PXA_CS0_PHYS, | |
210 | .end = PXA_CS0_PHYS + SZ_1M, | |
211 | .flags = IORESOURCE_MEM, | |
212 | }, | |
213 | }; | |
214 | ||
215 | static struct platform_device vpac270_onenand = { | |
216 | .name = "onenand-flash", | |
217 | .id = -1, | |
218 | .resource = vpac270_onenand_resources, | |
219 | .num_resources = ARRAY_SIZE(vpac270_onenand_resources), | |
220 | .dev = { | |
221 | .platform_data = &vpac270_onenand_info, | |
222 | }, | |
223 | }; | |
224 | ||
225 | static void __init vpac270_onenand_init(void) | |
226 | { | |
227 | platform_device_register(&vpac270_onenand); | |
228 | } | |
229 | #else | |
230 | static void __init vpac270_onenand_init(void) {} | |
231 | #endif | |
232 | ||
543cd842 M |
233 | /****************************************************************************** |
234 | * SD/MMC card controller | |
235 | ******************************************************************************/ | |
236 | #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) | |
237 | static struct pxamci_platform_data vpac270_mci_platform_data = { | |
238 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | |
f97cab28 | 239 | .detect_delay_ms = 200, |
543cd842 M |
240 | }; |
241 | ||
32d15448 LW |
242 | static struct gpiod_lookup_table vpac270_mci_gpio_table = { |
243 | .dev_id = "pxa2xx-mci.0", | |
244 | .table = { | |
245 | GPIO_LOOKUP("gpio-pxa", GPIO53_VPAC270_SD_DETECT_N, | |
246 | "cd", GPIO_ACTIVE_LOW), | |
247 | GPIO_LOOKUP("gpio-pxa", GPIO52_VPAC270_SD_READONLY, | |
248 | "wp", GPIO_ACTIVE_LOW), | |
249 | { }, | |
250 | }, | |
251 | }; | |
252 | ||
543cd842 M |
253 | static void __init vpac270_mmc_init(void) |
254 | { | |
32d15448 | 255 | gpiod_add_lookup_table(&vpac270_mci_gpio_table); |
543cd842 M |
256 | pxa_set_mci_info(&vpac270_mci_platform_data); |
257 | } | |
258 | #else | |
259 | static inline void vpac270_mmc_init(void) {} | |
260 | #endif | |
261 | ||
262 | /****************************************************************************** | |
263 | * GPIO keys | |
264 | ******************************************************************************/ | |
265 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
266 | static struct gpio_keys_button vpac270_pxa_buttons[] = { | |
267 | {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"}, | |
268 | }; | |
269 | ||
270 | static struct gpio_keys_platform_data vpac270_pxa_keys_data = { | |
271 | .buttons = vpac270_pxa_buttons, | |
272 | .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons), | |
273 | }; | |
274 | ||
275 | static struct platform_device vpac270_pxa_keys = { | |
276 | .name = "gpio-keys", | |
277 | .id = -1, | |
278 | .dev = { | |
279 | .platform_data = &vpac270_pxa_keys_data, | |
280 | }, | |
281 | }; | |
282 | ||
283 | static void __init vpac270_keys_init(void) | |
284 | { | |
285 | platform_device_register(&vpac270_pxa_keys); | |
286 | } | |
287 | #else | |
288 | static inline void vpac270_keys_init(void) {} | |
289 | #endif | |
290 | ||
291 | /****************************************************************************** | |
292 | * LED | |
293 | ******************************************************************************/ | |
294 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) | |
295 | struct gpio_led vpac270_gpio_leds[] = { | |
296 | { | |
297 | .name = "vpac270:orange:user", | |
298 | .default_trigger = "none", | |
299 | .gpio = GPIO15_VPAC270_LED_ORANGE, | |
300 | .active_low = 1, | |
301 | } | |
302 | }; | |
303 | ||
304 | static struct gpio_led_platform_data vpac270_gpio_led_info = { | |
305 | .leds = vpac270_gpio_leds, | |
306 | .num_leds = ARRAY_SIZE(vpac270_gpio_leds), | |
307 | }; | |
308 | ||
309 | static struct platform_device vpac270_leds = { | |
310 | .name = "leds-gpio", | |
311 | .id = -1, | |
312 | .dev = { | |
313 | .platform_data = &vpac270_gpio_led_info, | |
314 | } | |
315 | }; | |
316 | ||
317 | static void __init vpac270_leds_init(void) | |
318 | { | |
319 | platform_device_register(&vpac270_leds); | |
320 | } | |
321 | #else | |
322 | static inline void vpac270_leds_init(void) {} | |
323 | #endif | |
324 | ||
3d98f881 MV |
325 | /****************************************************************************** |
326 | * USB Host | |
327 | ******************************************************************************/ | |
328 | #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) | |
329 | static int vpac270_ohci_init(struct device *dev) | |
330 | { | |
331 | UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; | |
332 | return 0; | |
333 | } | |
334 | ||
335 | static struct pxaohci_platform_data vpac270_ohci_info = { | |
336 | .port_mode = PMM_PERPORT_MODE, | |
337 | .flags = ENABLE_PORT1 | ENABLE_PORT2 | | |
338 | POWER_CONTROL_LOW | POWER_SENSE_LOW, | |
339 | .init = vpac270_ohci_init, | |
340 | }; | |
341 | ||
342 | static void __init vpac270_uhc_init(void) | |
343 | { | |
344 | pxa_set_ohci_info(&vpac270_ohci_info); | |
345 | } | |
346 | #else | |
347 | static inline void vpac270_uhc_init(void) {} | |
348 | #endif | |
349 | ||
350 | /****************************************************************************** | |
351 | * USB Gadget | |
352 | ******************************************************************************/ | |
c0a39151 | 353 | #if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) |
fdabc466 LW |
354 | static struct gpiod_lookup_table vpac270_gpio_vbus_gpiod_table = { |
355 | .dev_id = "gpio-vbus", | |
356 | .table = { | |
357 | GPIO_LOOKUP("gpio-pxa", GPIO41_VPAC270_UDC_DETECT, | |
358 | "vbus", GPIO_ACTIVE_HIGH), | |
359 | { }, | |
360 | }, | |
3d98f881 MV |
361 | }; |
362 | ||
363 | static struct platform_device vpac270_gpio_vbus = { | |
364 | .name = "gpio-vbus", | |
365 | .id = -1, | |
3d98f881 MV |
366 | }; |
367 | ||
368 | static void vpac270_udc_command(int cmd) | |
369 | { | |
370 | if (cmd == PXA2XX_UDC_CMD_CONNECT) | |
fb25cb33 | 371 | UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; |
3d98f881 | 372 | else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) |
fb25cb33 | 373 | UP2OCR = UP2OCR_HXOE; |
3d98f881 MV |
374 | } |
375 | ||
376 | static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = { | |
377 | .udc_command = vpac270_udc_command, | |
378 | .gpio_pullup = -1, | |
379 | }; | |
380 | ||
381 | static void __init vpac270_udc_init(void) | |
382 | { | |
383 | pxa_set_udc_info(&vpac270_udc_info); | |
fdabc466 | 384 | gpiod_add_lookup_table(&vpac270_gpio_vbus_gpiod_table); |
3d98f881 MV |
385 | platform_device_register(&vpac270_gpio_vbus); |
386 | } | |
387 | #else | |
388 | static inline void vpac270_udc_init(void) {} | |
389 | #endif | |
390 | ||
947fb57e MV |
391 | /****************************************************************************** |
392 | * Ethernet | |
393 | ******************************************************************************/ | |
394 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
395 | static struct resource vpac270_dm9000_resources[] = { | |
396 | [0] = { | |
397 | .start = PXA_CS2_PHYS + 0x300, | |
398 | .end = PXA_CS2_PHYS + 0x303, | |
399 | .flags = IORESOURCE_MEM, | |
400 | }, | |
401 | [1] = { | |
402 | .start = PXA_CS2_PHYS + 0x304, | |
403 | .end = PXA_CS2_PHYS + 0x343, | |
404 | .flags = IORESOURCE_MEM, | |
405 | }, | |
406 | [2] = { | |
6384fdad HZ |
407 | .start = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), |
408 | .end = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), | |
947fb57e MV |
409 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
410 | }, | |
411 | }; | |
412 | ||
413 | static struct dm9000_plat_data vpac270_dm9000_platdata = { | |
414 | .flags = DM9000_PLATF_32BITONLY, | |
415 | }; | |
416 | ||
417 | static struct platform_device vpac270_dm9000_device = { | |
418 | .name = "dm9000", | |
419 | .id = -1, | |
420 | .num_resources = ARRAY_SIZE(vpac270_dm9000_resources), | |
421 | .resource = vpac270_dm9000_resources, | |
422 | .dev = { | |
423 | .platform_data = &vpac270_dm9000_platdata, | |
424 | } | |
425 | }; | |
426 | ||
427 | static void __init vpac270_eth_init(void) | |
428 | { | |
429 | platform_device_register(&vpac270_dm9000_device); | |
430 | } | |
431 | #else | |
432 | static inline void vpac270_eth_init(void) {} | |
433 | #endif | |
434 | ||
1a8fb70e MV |
435 | /****************************************************************************** |
436 | * Audio and Touchscreen | |
437 | ******************************************************************************/ | |
438 | #if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ | |
439 | defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) | |
440 | static pxa2xx_audio_ops_t vpac270_ac97_pdata = { | |
441 | .reset_gpio = 95, | |
442 | }; | |
443 | ||
444 | static struct ucb1400_pdata vpac270_ucb1400_pdata = { | |
6384fdad | 445 | .irq = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ), |
1a8fb70e MV |
446 | }; |
447 | ||
448 | static struct platform_device vpac270_ucb1400_device = { | |
449 | .name = "ucb1400_core", | |
450 | .id = -1, | |
451 | .dev = { | |
452 | .platform_data = &vpac270_ucb1400_pdata, | |
453 | }, | |
454 | }; | |
455 | ||
456 | static void __init vpac270_ts_init(void) | |
457 | { | |
458 | pxa_set_ac97_info(&vpac270_ac97_pdata); | |
459 | platform_device_register(&vpac270_ucb1400_device); | |
460 | } | |
461 | #else | |
462 | static inline void vpac270_ts_init(void) {} | |
463 | #endif | |
464 | ||
83a4a102 MV |
465 | /****************************************************************************** |
466 | * RTC | |
467 | ******************************************************************************/ | |
468 | #if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE) | |
469 | static struct i2c_board_info __initdata vpac270_i2c_devs[] = { | |
470 | { | |
471 | I2C_BOARD_INFO("ds1339", 0x68), | |
472 | }, | |
473 | }; | |
474 | ||
475 | static void __init vpac270_rtc_init(void) | |
476 | { | |
83a4a102 MV |
477 | i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs)); |
478 | } | |
479 | #else | |
480 | static inline void vpac270_rtc_init(void) {} | |
481 | #endif | |
482 | ||
543cd842 M |
483 | /****************************************************************************** |
484 | * Framebuffer | |
485 | ******************************************************************************/ | |
486 | #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) | |
487 | static struct pxafb_mode_info vpac270_lcd_modes[] = { | |
488 | { | |
489 | .pixclock = 57692, | |
490 | .xres = 640, | |
491 | .yres = 480, | |
492 | .bpp = 32, | |
493 | .depth = 18, | |
494 | ||
495 | .left_margin = 144, | |
496 | .right_margin = 32, | |
497 | .upper_margin = 13, | |
498 | .lower_margin = 30, | |
499 | ||
500 | .hsync_len = 32, | |
501 | .vsync_len = 2, | |
502 | ||
503 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
97dbc516 MV |
504 | }, { /* CRT 640x480 */ |
505 | .pixclock = 35000, | |
506 | .xres = 640, | |
507 | .yres = 480, | |
508 | .bpp = 16, | |
509 | .depth = 16, | |
510 | ||
511 | .left_margin = 96, | |
512 | .right_margin = 48, | |
513 | .upper_margin = 33, | |
514 | .lower_margin = 10, | |
515 | ||
516 | .hsync_len = 48, | |
517 | .vsync_len = 1, | |
518 | ||
519 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
520 | }, { /* CRT 800x600 H=30kHz V=48HZ */ | |
521 | .pixclock = 25000, | |
522 | .xres = 800, | |
523 | .yres = 600, | |
524 | .bpp = 16, | |
525 | .depth = 16, | |
526 | ||
527 | .left_margin = 50, | |
528 | .right_margin = 1, | |
529 | .upper_margin = 21, | |
530 | .lower_margin = 12, | |
531 | ||
532 | .hsync_len = 8, | |
533 | .vsync_len = 1, | |
534 | ||
535 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
536 | }, { /* CRT 1024x768 H=40kHz V=50Hz */ | |
537 | .pixclock = 15000, | |
538 | .xres = 1024, | |
539 | .yres = 768, | |
540 | .bpp = 16, | |
541 | .depth = 16, | |
542 | ||
543 | .left_margin = 220, | |
544 | .right_margin = 8, | |
545 | .upper_margin = 33, | |
546 | .lower_margin = 2, | |
547 | ||
548 | .hsync_len = 48, | |
549 | .vsync_len = 1, | |
550 | ||
551 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | |
552 | } | |
543cd842 M |
553 | }; |
554 | ||
555 | static struct pxafb_mach_info vpac270_lcd_screen = { | |
556 | .modes = vpac270_lcd_modes, | |
557 | .num_modes = ARRAY_SIZE(vpac270_lcd_modes), | |
558 | .lcd_conn = LCD_COLOR_TFT_18BPP, | |
559 | }; | |
560 | ||
561 | static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info) | |
562 | { | |
563 | gpio_set_value(GPIO81_VPAC270_BKL_ON, on); | |
564 | } | |
565 | ||
566 | static void __init vpac270_lcd_init(void) | |
567 | { | |
568 | int ret; | |
569 | ||
570 | ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON"); | |
571 | if (ret) { | |
572 | pr_err("Requesting BKL-ON GPIO failed!\n"); | |
573 | goto err; | |
574 | } | |
575 | ||
576 | ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1); | |
577 | if (ret) { | |
578 | pr_err("Setting BKL-ON GPIO direction failed!\n"); | |
579 | goto err2; | |
580 | } | |
581 | ||
582 | vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; | |
4321e1a1 | 583 | pxa_set_fb_info(NULL, &vpac270_lcd_screen); |
543cd842 M |
584 | return; |
585 | ||
586 | err2: | |
587 | gpio_free(GPIO81_VPAC270_BKL_ON); | |
588 | err: | |
589 | return; | |
590 | } | |
591 | #else | |
592 | static inline void vpac270_lcd_init(void) {} | |
593 | #endif | |
594 | ||
052345ae MV |
595 | /****************************************************************************** |
596 | * PATA IDE | |
597 | ******************************************************************************/ | |
9b2dbdc7 MV |
598 | #if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE) |
599 | static struct pata_pxa_pdata vpac270_pata_pdata = { | |
600 | .reg_shift = 1, | |
601 | .dma_dreq = 1, | |
052345ae MV |
602 | .irq_flags = IRQF_TRIGGER_RISING, |
603 | }; | |
604 | ||
605 | static struct resource vpac270_ide_resources[] = { | |
606 | [0] = { /* I/O Base address */ | |
607 | .start = PXA_CS3_PHYS + 0x120, | |
608 | .end = PXA_CS3_PHYS + 0x13f, | |
609 | .flags = IORESOURCE_MEM | |
610 | }, | |
611 | [1] = { /* CTL Base address */ | |
612 | .start = PXA_CS3_PHYS + 0x15c, | |
613 | .end = PXA_CS3_PHYS + 0x15f, | |
614 | .flags = IORESOURCE_MEM | |
615 | }, | |
9b2dbdc7 MV |
616 | [2] = { /* DMA Base address */ |
617 | .start = PXA_CS3_PHYS + 0x20, | |
618 | .end = PXA_CS3_PHYS + 0x2f, | |
619 | .flags = IORESOURCE_DMA | |
620 | }, | |
621 | [3] = { /* IDE IRQ pin */ | |
4929f5a8 HZ |
622 | .start = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), |
623 | .end = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), | |
052345ae MV |
624 | .flags = IORESOURCE_IRQ |
625 | } | |
626 | }; | |
627 | ||
628 | static struct platform_device vpac270_ide_device = { | |
9b2dbdc7 | 629 | .name = "pata_pxa", |
052345ae MV |
630 | .num_resources = ARRAY_SIZE(vpac270_ide_resources), |
631 | .resource = vpac270_ide_resources, | |
632 | .dev = { | |
633 | .platform_data = &vpac270_pata_pdata, | |
9b2dbdc7 | 634 | .coherent_dma_mask = 0xffffffff, |
052345ae MV |
635 | } |
636 | }; | |
637 | ||
638 | static void __init vpac270_ide_init(void) | |
639 | { | |
640 | platform_device_register(&vpac270_ide_device); | |
641 | } | |
642 | #else | |
643 | static inline void vpac270_ide_init(void) {} | |
644 | #endif | |
645 | ||
54e70bff MV |
646 | /****************************************************************************** |
647 | * Core power regulator | |
648 | ******************************************************************************/ | |
649 | #if defined(CONFIG_REGULATOR_MAX1586) || \ | |
650 | defined(CONFIG_REGULATOR_MAX1586_MODULE) | |
651 | static struct regulator_consumer_supply vpac270_max1587a_consumers[] = { | |
0bf189ab | 652 | REGULATOR_SUPPLY("vcc_core", NULL), |
54e70bff MV |
653 | }; |
654 | ||
655 | static struct regulator_init_data vpac270_max1587a_v3_info = { | |
656 | .constraints = { | |
657 | .name = "vcc_core range", | |
658 | .min_uV = 900000, | |
659 | .max_uV = 1705000, | |
660 | .always_on = 1, | |
661 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, | |
662 | }, | |
663 | .consumer_supplies = vpac270_max1587a_consumers, | |
664 | .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers), | |
665 | }; | |
666 | ||
667 | static struct max1586_subdev_data vpac270_max1587a_subdevs[] = { | |
668 | { | |
669 | .name = "vcc_core", | |
670 | .id = MAX1586_V3, | |
671 | .platform_data = &vpac270_max1587a_v3_info, | |
672 | } | |
673 | }; | |
674 | ||
675 | static struct max1586_platform_data vpac270_max1587a_info = { | |
676 | .subdevs = vpac270_max1587a_subdevs, | |
677 | .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs), | |
678 | .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ | |
679 | }; | |
680 | ||
681 | static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = { | |
682 | { | |
683 | I2C_BOARD_INFO("max1586", 0x14), | |
684 | .platform_data = &vpac270_max1587a_info, | |
685 | }, | |
686 | }; | |
687 | ||
688 | static void __init vpac270_pmic_init(void) | |
689 | { | |
690 | i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info)); | |
691 | } | |
692 | #else | |
693 | static inline void vpac270_pmic_init(void) {} | |
694 | #endif | |
695 | ||
696 | ||
543cd842 M |
697 | /****************************************************************************** |
698 | * Machine init | |
699 | ******************************************************************************/ | |
700 | static void __init vpac270_init(void) | |
701 | { | |
702 | pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config)); | |
703 | ||
704 | pxa_set_ffuart_info(NULL); | |
705 | pxa_set_btuart_info(NULL); | |
706 | pxa_set_stuart_info(NULL); | |
54e70bff MV |
707 | pxa_set_i2c_info(NULL); |
708 | pxa27x_set_i2c_power_info(NULL); | |
543cd842 | 709 | |
54e70bff | 710 | vpac270_pmic_init(); |
543cd842 M |
711 | vpac270_lcd_init(); |
712 | vpac270_mmc_init(); | |
713 | vpac270_nor_init(); | |
bcc399bb | 714 | vpac270_onenand_init(); |
543cd842 M |
715 | vpac270_leds_init(); |
716 | vpac270_keys_init(); | |
3d98f881 MV |
717 | vpac270_uhc_init(); |
718 | vpac270_udc_init(); | |
947fb57e | 719 | vpac270_eth_init(); |
1a8fb70e | 720 | vpac270_ts_init(); |
83a4a102 | 721 | vpac270_rtc_init(); |
052345ae | 722 | vpac270_ide_init(); |
a927ef89 RJ |
723 | |
724 | regulator_has_full_constraints(); | |
543cd842 M |
725 | } |
726 | ||
727 | MACHINE_START(VPAC270, "Voipac PXA270") | |
7375aba6 | 728 | .atag_offset = 0x100, |
851982c1 | 729 | .map_io = pxa27x_map_io, |
4e611091 | 730 | .nr_irqs = PXA_NR_IRQS, |
543cd842 | 731 | .init_irq = pxa27x_init_irq, |
8a97ae2f | 732 | .handle_irq = pxa27x_handle_irq, |
6bb27d73 | 733 | .init_time = pxa_timer_init, |
271a74fc RK |
734 | .init_machine = vpac270_init, |
735 | .restart = pxa_restart, | |
543cd842 | 736 | MACHINE_END |