]>
Commit | Line | Data |
---|---|---|
d55c9a97 KM |
1 | /* |
2 | * bonito board support | |
3 | * | |
4 | * Copyright (C) 2011 Renesas Solutions Corp. | |
5 | * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; version 2 of the License. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/kernel.h> | |
e609b7cb | 23 | #include <linux/i2c.h> |
d55c9a97 KM |
24 | #include <linux/init.h> |
25 | #include <linux/interrupt.h> | |
26 | #include <linux/irq.h> | |
27 | #include <linux/platform_device.h> | |
28 | #include <linux/gpio.h> | |
d3ed18ea GL |
29 | #include <linux/regulator/fixed.h> |
30 | #include <linux/regulator/machine.h> | |
6bf2805d | 31 | #include <linux/smsc911x.h> |
63d71126 | 32 | #include <linux/videodev2.h> |
d55c9a97 KM |
33 | #include <mach/common.h> |
34 | #include <asm/mach-types.h> | |
35 | #include <asm/mach/arch.h> | |
36 | #include <asm/mach/map.h> | |
37 | #include <asm/mach/time.h> | |
38 | #include <asm/hardware/cache-l2x0.h> | |
39 | #include <mach/r8a7740.h> | |
250a2723 | 40 | #include <mach/irqs.h> |
665ccfa0 | 41 | #include <video/sh_mobile_lcdc.h> |
d55c9a97 KM |
42 | |
43 | /* | |
44 | * CS Address device note | |
45 | *---------------------------------------------------------------- | |
46 | * 0 0x0000_0000 NOR Flash (64MB) SW12 : bit3 = OFF | |
47 | * 2 0x0800_0000 ExtNOR (64MB) SW12 : bit3 = OFF | |
48 | * 4 - | |
49 | * 5A - | |
50 | * 5B 0x1600_0000 SRAM (8MB) | |
51 | * 6 0x1800_0000 FPGA (64K) | |
52 | * 0x1801_0000 Ether (4KB) | |
53 | * 0x1801_1000 USB (4KB) | |
54 | */ | |
55 | ||
56 | /* | |
57 | * SW12 | |
58 | * | |
59 | * bit1 bit2 bit3 | |
60 | *---------------------------------------------------------------------------- | |
61 | * ON NOR WriteProtect NAND WriteProtect CS0 ExtNOR / CS2 NOR | |
62 | * OFF NOR Not WriteProtect NAND Not WriteProtect CS0 NOR / CS2 ExtNOR | |
63 | */ | |
64 | ||
b6b37e25 KM |
65 | /* |
66 | * SCIFA5 (CN42) | |
67 | * | |
68 | * S38.3 = ON | |
69 | * S39.6 = ON | |
70 | * S43.1 = ON | |
71 | */ | |
72 | ||
665ccfa0 KM |
73 | /* |
74 | * LCDC0 (CN3/CN4/CN7) | |
75 | * | |
76 | * S38.1 = OFF | |
77 | * S38.2 = OFF | |
78 | */ | |
79 | ||
d3ed18ea GL |
80 | /* Dummy supplies, where voltage doesn't matter */ |
81 | static struct regulator_consumer_supply dummy_supplies[] = { | |
82 | REGULATOR_SUPPLY("vddvario", "smsc911x"), | |
83 | REGULATOR_SUPPLY("vdd33a", "smsc911x"), | |
84 | }; | |
85 | ||
d55c9a97 KM |
86 | /* |
87 | * FPGA | |
88 | */ | |
6bf2805d KM |
89 | #define IRQSR0 0x0020 |
90 | #define IRQSR1 0x0022 | |
91 | #define IRQMR0 0x0030 | |
92 | #define IRQMR1 0x0032 | |
b6b37e25 KM |
93 | #define BUSSWMR1 0x0070 |
94 | #define BUSSWMR2 0x0072 | |
95 | #define BUSSWMR3 0x0074 | |
96 | #define BUSSWMR4 0x0076 | |
97 | ||
665ccfa0 | 98 | #define LCDCR 0x10B4 |
6bf2805d KM |
99 | #define DEVRSTCR1 0x10D0 |
100 | #define DEVRSTCR2 0x10D2 | |
d55c9a97 KM |
101 | #define A1MDSR 0x10E0 |
102 | #define BVERR 0x1100 | |
6bf2805d KM |
103 | |
104 | /* FPGA IRQ */ | |
105 | #define FPGA_IRQ_BASE (512) | |
106 | #define FPGA_IRQ0 (FPGA_IRQ_BASE) | |
107 | #define FPGA_IRQ1 (FPGA_IRQ_BASE + 16) | |
8900df7a | 108 | #define FPGA_ETH_IRQ (FPGA_IRQ0 + 15) |
d55c9a97 KM |
109 | static u16 bonito_fpga_read(u32 offset) |
110 | { | |
0a4b04dc | 111 | return __raw_readw(IOMEM(0xf0003000) + offset); |
d55c9a97 KM |
112 | } |
113 | ||
114 | static void bonito_fpga_write(u32 offset, u16 val) | |
115 | { | |
0a4b04dc | 116 | __raw_writew(val, IOMEM(0xf0003000) + offset); |
d55c9a97 KM |
117 | } |
118 | ||
6bf2805d KM |
119 | static void bonito_fpga_irq_disable(struct irq_data *data) |
120 | { | |
121 | unsigned int irq = data->irq; | |
122 | u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1; | |
123 | int shift = irq % 16; | |
124 | ||
125 | bonito_fpga_write(addr, bonito_fpga_read(addr) | (1 << shift)); | |
126 | } | |
127 | ||
128 | static void bonito_fpga_irq_enable(struct irq_data *data) | |
129 | { | |
130 | unsigned int irq = data->irq; | |
131 | u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1; | |
132 | int shift = irq % 16; | |
133 | ||
134 | bonito_fpga_write(addr, bonito_fpga_read(addr) & ~(1 << shift)); | |
135 | } | |
136 | ||
137 | static struct irq_chip bonito_fpga_irq_chip __read_mostly = { | |
138 | .name = "bonito FPGA", | |
139 | .irq_mask = bonito_fpga_irq_disable, | |
140 | .irq_unmask = bonito_fpga_irq_enable, | |
141 | }; | |
142 | ||
143 | static void bonito_fpga_irq_demux(unsigned int irq, struct irq_desc *desc) | |
144 | { | |
145 | u32 val = bonito_fpga_read(IRQSR1) << 16 | | |
146 | bonito_fpga_read(IRQSR0); | |
147 | u32 mask = bonito_fpga_read(IRQMR1) << 16 | | |
148 | bonito_fpga_read(IRQMR0); | |
149 | ||
150 | int i; | |
151 | ||
152 | val &= ~mask; | |
153 | ||
154 | for (i = 0; i < 32; i++) { | |
155 | if (!(val & (1 << i))) | |
156 | continue; | |
157 | ||
158 | generic_handle_irq(FPGA_IRQ_BASE + i); | |
159 | } | |
160 | } | |
161 | ||
162 | static void bonito_fpga_init(void) | |
163 | { | |
164 | int i; | |
165 | ||
166 | bonito_fpga_write(IRQMR0, 0xffff); /* mask all */ | |
167 | bonito_fpga_write(IRQMR1, 0xffff); /* mask all */ | |
168 | ||
169 | /* Device reset */ | |
170 | bonito_fpga_write(DEVRSTCR1, | |
171 | (1 << 2)); /* Eth */ | |
172 | ||
173 | /* FPGA irq require special handling */ | |
174 | for (i = FPGA_IRQ_BASE; i < FPGA_IRQ_BASE + 32; i++) { | |
175 | irq_set_chip_and_handler_name(i, &bonito_fpga_irq_chip, | |
176 | handle_level_irq, "level"); | |
177 | set_irq_flags(i, IRQF_VALID); /* yuck */ | |
178 | } | |
179 | ||
180 | irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux); | |
181 | irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW); | |
182 | } | |
183 | ||
e609b7cb KM |
184 | /* |
185 | * PMIC settings | |
186 | * | |
187 | * FIXME | |
188 | * | |
189 | * bonito board needs some settings by pmic which use i2c access. | |
190 | * pmic settings use device_initcall() here for use it. | |
191 | */ | |
192 | static __u8 *pmic_settings = NULL; | |
193 | static __u8 pmic_do_2A[] = { | |
194 | 0x1C, 0x09, | |
195 | 0x1A, 0x80, | |
196 | 0xff, 0xff, | |
197 | }; | |
198 | ||
199 | static int __init pmic_init(void) | |
200 | { | |
201 | struct i2c_adapter *a = i2c_get_adapter(0); | |
202 | struct i2c_msg msg; | |
203 | __u8 buf[2]; | |
204 | int i, ret; | |
205 | ||
206 | if (!pmic_settings) | |
207 | return 0; | |
208 | if (!a) | |
209 | return 0; | |
210 | ||
211 | msg.addr = 0x46; | |
212 | msg.buf = buf; | |
213 | msg.len = 2; | |
214 | msg.flags = 0; | |
215 | ||
216 | for (i = 0; ; i += 2) { | |
217 | buf[0] = pmic_settings[i + 0]; | |
218 | buf[1] = pmic_settings[i + 1]; | |
219 | ||
220 | if ((0xff == buf[0]) && (0xff == buf[1])) | |
221 | break; | |
222 | ||
223 | ret = i2c_transfer(a, &msg, 1); | |
224 | if (ret < 0) { | |
225 | pr_err("i2c transfer fail\n"); | |
226 | break; | |
227 | } | |
228 | } | |
229 | ||
230 | return 0; | |
231 | } | |
232 | device_initcall(pmic_init); | |
233 | ||
665ccfa0 KM |
234 | /* |
235 | * LCDC0 | |
236 | */ | |
237 | static const struct fb_videomode lcdc0_mode = { | |
238 | .name = "WVGA Panel", | |
239 | .xres = 800, | |
240 | .yres = 480, | |
241 | .left_margin = 88, | |
242 | .right_margin = 40, | |
243 | .hsync_len = 128, | |
244 | .upper_margin = 20, | |
245 | .lower_margin = 5, | |
246 | .vsync_len = 5, | |
247 | .sync = 0, | |
248 | }; | |
249 | ||
250 | static struct sh_mobile_lcdc_info lcdc0_info = { | |
251 | .clock_source = LCDC_CLK_BUS, | |
252 | .ch[0] = { | |
253 | .chan = LCDC_CHAN_MAINLCD, | |
63d71126 | 254 | .fourcc = V4L2_PIX_FMT_RGB565, |
665ccfa0 KM |
255 | .interface_type = RGB24, |
256 | .clock_divider = 5, | |
257 | .flags = 0, | |
93ff2598 LP |
258 | .lcd_modes = &lcdc0_mode, |
259 | .num_modes = 1, | |
afaad83b | 260 | .panel_cfg = { |
665ccfa0 KM |
261 | .width = 152, |
262 | .height = 91, | |
263 | }, | |
264 | }, | |
265 | }; | |
266 | ||
267 | static struct resource lcdc0_resources[] = { | |
268 | [0] = { | |
269 | .name = "LCDC0", | |
270 | .start = 0xfe940000, | |
271 | .end = 0xfe943fff, | |
272 | .flags = IORESOURCE_MEM, | |
273 | }, | |
274 | [1] = { | |
275 | .start = intcs_evt2irq(0x0580), | |
276 | .flags = IORESOURCE_IRQ, | |
277 | }, | |
278 | }; | |
279 | ||
280 | static struct platform_device lcdc0_device = { | |
281 | .name = "sh_mobile_lcdc_fb", | |
282 | .id = 0, | |
283 | .resource = lcdc0_resources, | |
284 | .num_resources = ARRAY_SIZE(lcdc0_resources), | |
285 | .dev = { | |
286 | .platform_data = &lcdc0_info, | |
287 | .coherent_dma_mask = ~0, | |
288 | }, | |
289 | }; | |
290 | ||
8900df7a KM |
291 | /* |
292 | * SMSC 9221 | |
293 | */ | |
294 | static struct resource smsc_resources[] = { | |
295 | [0] = { | |
296 | .start = 0x18010000, | |
297 | .end = 0x18011000 - 1, | |
298 | .flags = IORESOURCE_MEM, | |
299 | }, | |
300 | [1] = { | |
301 | .start = FPGA_ETH_IRQ, | |
302 | .flags = IORESOURCE_IRQ, | |
303 | }, | |
304 | }; | |
305 | ||
306 | static struct smsc911x_platform_config smsc_platdata = { | |
307 | .flags = SMSC911X_USE_16BIT, | |
308 | .phy_interface = PHY_INTERFACE_MODE_MII, | |
309 | .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | |
310 | .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, | |
311 | }; | |
312 | ||
313 | static struct platform_device smsc_device = { | |
314 | .name = "smsc911x", | |
315 | .dev = { | |
316 | .platform_data = &smsc_platdata, | |
317 | }, | |
318 | .resource = smsc_resources, | |
319 | .num_resources = ARRAY_SIZE(smsc_resources), | |
320 | }; | |
321 | ||
d55c9a97 | 322 | /* |
b6b37e25 | 323 | * core board devices |
d55c9a97 | 324 | */ |
b6b37e25 KM |
325 | static struct platform_device *bonito_core_devices[] __initdata = { |
326 | }; | |
327 | ||
328 | /* | |
329 | * base board devices | |
330 | */ | |
331 | static struct platform_device *bonito_base_devices[] __initdata = { | |
665ccfa0 | 332 | &lcdc0_device, |
8900df7a | 333 | &smsc_device, |
d55c9a97 KM |
334 | }; |
335 | ||
336 | /* | |
337 | * map I/O | |
338 | */ | |
339 | static struct map_desc bonito_io_desc[] __initdata = { | |
d55c9a97 KM |
340 | /* |
341 | * for FPGA (0x1800000-0x19ffffff) | |
342 | * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000 | |
343 | */ | |
344 | { | |
345 | .virtual = 0xf0003000, | |
346 | .pfn = __phys_to_pfn(0x18000000), | |
347 | .length = PAGE_SIZE * 2, | |
348 | .type = MT_DEVICE_NONSHARED | |
349 | } | |
350 | }; | |
351 | ||
352 | static void __init bonito_map_io(void) | |
353 | { | |
d3ab7221 | 354 | r8a7740_map_io(); |
d55c9a97 | 355 | iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc)); |
d55c9a97 KM |
356 | } |
357 | ||
358 | /* | |
359 | * board init | |
360 | */ | |
b6b37e25 KM |
361 | #define BIT_ON(sw, bit) (sw & (1 << bit)) |
362 | #define BIT_OFF(sw, bit) (!(sw & (1 << bit))) | |
363 | ||
0a4b04dc AB |
364 | #define VCCQ1CR IOMEM(0xE6058140) |
365 | #define VCCQ1LCDCR IOMEM(0xE6058186) | |
665ccfa0 | 366 | |
d55c9a97 KM |
367 | static void __init bonito_init(void) |
368 | { | |
369 | u16 val; | |
370 | ||
d3ed18ea GL |
371 | regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); |
372 | ||
d55c9a97 | 373 | r8a7740_pinmux_init(); |
6bf2805d | 374 | bonito_fpga_init(); |
d55c9a97 | 375 | |
e609b7cb KM |
376 | pmic_settings = pmic_do_2A; |
377 | ||
b6b37e25 KM |
378 | /* |
379 | * core board settings | |
380 | */ | |
d55c9a97 KM |
381 | |
382 | #ifdef CONFIG_CACHE_L2X0 | |
383 | /* Early BRESP enable, Shared attribute override enable, 32K*8way */ | |
a2a47ca3 | 384 | l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); |
d55c9a97 KM |
385 | #endif |
386 | ||
387 | r8a7740_add_standard_devices(); | |
b6b37e25 KM |
388 | |
389 | platform_add_devices(bonito_core_devices, | |
390 | ARRAY_SIZE(bonito_core_devices)); | |
391 | ||
392 | /* | |
393 | * base board settings | |
394 | */ | |
395 | gpio_request(GPIO_PORT176, NULL); | |
396 | gpio_direction_input(GPIO_PORT176); | |
397 | if (!gpio_get_value(GPIO_PORT176)) { | |
398 | u16 bsw2; | |
399 | u16 bsw3; | |
400 | u16 bsw4; | |
401 | ||
402 | /* | |
403 | * FPGA | |
404 | */ | |
405 | gpio_request(GPIO_FN_CS5B, NULL); | |
406 | gpio_request(GPIO_FN_CS6A, NULL); | |
407 | gpio_request(GPIO_FN_CS5A_PORT105, NULL); | |
408 | gpio_request(GPIO_FN_IRQ10, NULL); | |
409 | ||
410 | val = bonito_fpga_read(BVERR); | |
411 | pr_info("bonito version: cpu %02x, base %02x\n", | |
412 | ((val >> 8) & 0xFF), | |
413 | ((val >> 0) & 0xFF)); | |
414 | ||
415 | bsw2 = bonito_fpga_read(BUSSWMR2); | |
416 | bsw3 = bonito_fpga_read(BUSSWMR3); | |
417 | bsw4 = bonito_fpga_read(BUSSWMR4); | |
418 | ||
419 | /* | |
420 | * SCIFA5 (CN42) | |
421 | */ | |
422 | if (BIT_OFF(bsw2, 1) && /* S38.3 = ON */ | |
423 | BIT_OFF(bsw3, 9) && /* S39.6 = ON */ | |
424 | BIT_OFF(bsw4, 4)) { /* S43.1 = ON */ | |
425 | gpio_request(GPIO_FN_SCIFA5_TXD_PORT91, NULL); | |
426 | gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL); | |
427 | } | |
428 | ||
665ccfa0 KM |
429 | /* |
430 | * LCDC0 (CN3) | |
431 | */ | |
432 | if (BIT_ON(bsw2, 3) && /* S38.1 = OFF */ | |
433 | BIT_ON(bsw2, 2)) { /* S38.2 = OFF */ | |
434 | gpio_request(GPIO_FN_LCDC0_SELECT, NULL); | |
435 | gpio_request(GPIO_FN_LCD0_D0, NULL); | |
436 | gpio_request(GPIO_FN_LCD0_D1, NULL); | |
437 | gpio_request(GPIO_FN_LCD0_D2, NULL); | |
438 | gpio_request(GPIO_FN_LCD0_D3, NULL); | |
439 | gpio_request(GPIO_FN_LCD0_D4, NULL); | |
440 | gpio_request(GPIO_FN_LCD0_D5, NULL); | |
441 | gpio_request(GPIO_FN_LCD0_D6, NULL); | |
442 | gpio_request(GPIO_FN_LCD0_D7, NULL); | |
443 | gpio_request(GPIO_FN_LCD0_D8, NULL); | |
444 | gpio_request(GPIO_FN_LCD0_D9, NULL); | |
445 | gpio_request(GPIO_FN_LCD0_D10, NULL); | |
446 | gpio_request(GPIO_FN_LCD0_D11, NULL); | |
447 | gpio_request(GPIO_FN_LCD0_D12, NULL); | |
448 | gpio_request(GPIO_FN_LCD0_D13, NULL); | |
449 | gpio_request(GPIO_FN_LCD0_D14, NULL); | |
450 | gpio_request(GPIO_FN_LCD0_D15, NULL); | |
451 | gpio_request(GPIO_FN_LCD0_D16, NULL); | |
452 | gpio_request(GPIO_FN_LCD0_D17, NULL); | |
453 | gpio_request(GPIO_FN_LCD0_D18_PORT163, NULL); | |
454 | gpio_request(GPIO_FN_LCD0_D19_PORT162, NULL); | |
455 | gpio_request(GPIO_FN_LCD0_D20_PORT161, NULL); | |
456 | gpio_request(GPIO_FN_LCD0_D21_PORT158, NULL); | |
457 | gpio_request(GPIO_FN_LCD0_D22_PORT160, NULL); | |
458 | gpio_request(GPIO_FN_LCD0_D23_PORT159, NULL); | |
459 | gpio_request(GPIO_FN_LCD0_DCK, NULL); | |
460 | gpio_request(GPIO_FN_LCD0_VSYN, NULL); | |
461 | gpio_request(GPIO_FN_LCD0_HSYN, NULL); | |
462 | gpio_request(GPIO_FN_LCD0_DISP, NULL); | |
463 | gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); | |
464 | ||
465 | gpio_request(GPIO_PORT61, NULL); /* LCDDON */ | |
466 | gpio_direction_output(GPIO_PORT61, 1); | |
467 | ||
468 | /* backlight on */ | |
469 | bonito_fpga_write(LCDCR, 1); | |
470 | ||
471 | /* drivability Max */ | |
472 | __raw_writew(0x00FF , VCCQ1LCDCR); | |
473 | __raw_writew(0xFFFF , VCCQ1CR); | |
474 | } | |
475 | ||
b6b37e25 KM |
476 | platform_add_devices(bonito_base_devices, |
477 | ARRAY_SIZE(bonito_base_devices)); | |
478 | } | |
d55c9a97 KM |
479 | } |
480 | ||
23e5bc03 | 481 | static void __init bonito_earlytimer_init(void) |
d55c9a97 KM |
482 | { |
483 | u16 val; | |
484 | u8 md_ck = 0; | |
485 | ||
486 | /* read MD_CK value */ | |
487 | val = bonito_fpga_read(A1MDSR); | |
488 | if (val & (1 << 10)) | |
489 | md_ck |= MD_CK2; | |
490 | if (val & (1 << 9)) | |
491 | md_ck |= MD_CK1; | |
492 | if (val & (1 << 8)) | |
493 | md_ck |= MD_CK0; | |
494 | ||
495 | r8a7740_clock_init(md_ck); | |
23e5bc03 | 496 | shmobile_earlytimer_init(); |
d55c9a97 KM |
497 | } |
498 | ||
8823e2b3 | 499 | static void __init bonito_add_early_devices(void) |
23e5bc03 MD |
500 | { |
501 | r8a7740_add_early_devices(); | |
23e5bc03 | 502 | } |
d55c9a97 KM |
503 | |
504 | MACHINE_START(BONITO, "bonito") | |
505 | .map_io = bonito_map_io, | |
23e5bc03 | 506 | .init_early = bonito_add_early_devices, |
d55c9a97 KM |
507 | .init_irq = r8a7740_init_irq, |
508 | .handle_irq = shmobile_handle_irq_intc, | |
509 | .init_machine = bonito_init, | |
21cc1b7e | 510 | .init_late = shmobile_init_late, |
6bb27d73 | 511 | .init_time = bonito_earlytimer_init, |
d55c9a97 | 512 | MACHINE_END |