]>
Commit | Line | Data |
---|---|---|
920adc75 KM |
1 | /* |
2 | * mackerel board support | |
3 | * | |
4 | * Copyright (C) 2010 Renesas Solutions Corp. | |
5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * based on ap4evb | |
8 | * Copyright (C) 2010 Magnus Damm | |
9 | * Copyright (C) 2008 Yoshihiro Shimoda | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
13 | * the Free Software Foundation; version 2 of the License. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
23 | */ | |
24 | #include <linux/kernel.h> | |
25 | #include <linux/init.h> | |
26 | #include <linux/interrupt.h> | |
27 | #include <linux/irq.h> | |
28 | #include <linux/platform_device.h> | |
29 | #include <linux/gpio.h> | |
30 | #include <linux/input.h> | |
31 | #include <linux/io.h> | |
1a44d72a | 32 | #include <linux/i2c.h> |
d44deb35 | 33 | #include <linux/leds.h> |
920adc75 KM |
34 | #include <linux/mtd/mtd.h> |
35 | #include <linux/mtd/partitions.h> | |
36 | #include <linux/mtd/physmap.h> | |
2264c151 | 37 | #include <linux/smsc911x.h> |
1a44d72a | 38 | #include <linux/sh_intc.h> |
25338f2e | 39 | #include <linux/usb/r8a66597.h> |
920adc75 | 40 | |
11fee467 KM |
41 | #include <video/sh_mobile_lcdc.h> |
42 | ||
1a44d72a KM |
43 | #include <sound/sh_fsi.h> |
44 | ||
920adc75 KM |
45 | #include <mach/common.h> |
46 | #include <mach/sh7372.h> | |
47 | ||
48 | #include <asm/mach/arch.h> | |
49 | #include <asm/mach/time.h> | |
50 | #include <asm/mach/map.h> | |
51 | #include <asm/mach-types.h> | |
52 | ||
53 | /* | |
54 | * Address Interface BusWidth note | |
55 | * ------------------------------------------------------------------ | |
56 | * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON | |
57 | * 0x0800_0000 user area - | |
58 | * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF | |
59 | * 0x1400_0000 Ether (LAN9220) 16bit | |
60 | * 0x1600_0000 user area - cannot use with NAND | |
61 | * 0x1800_0000 user area - | |
62 | * 0x1A00_0000 - | |
63 | * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit | |
64 | */ | |
65 | ||
4b82b689 KM |
66 | /* |
67 | * CPU mode | |
68 | * | |
69 | * SW4 | Boot Area| Master | Remarks | |
70 | * 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor| | |
71 | * ----+-----+-----+-----+-----+-----+-----+----------+----------+-------------- | |
72 | * ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM | |
73 | * ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug | |
74 | * ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug | |
75 | * X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM | |
76 | * OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM | |
77 | * X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM | |
78 | * OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone | |
79 | * ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone | |
80 | */ | |
81 | ||
82 | /* | |
83 | * NOR Flash ROM | |
84 | * | |
85 | * SW1 | SW2 | SW7 | NOR Flash ROM | |
86 | * bit1 | bit1 bit2 | bit1 | Memory allocation | |
87 | * ------+------------+------+------------------ | |
88 | * OFF | ON OFF | ON | Area 0 | |
89 | * OFF | ON OFF | OFF | Area 4 | |
90 | */ | |
91 | ||
92 | /* | |
93 | * SMSC 9220 | |
94 | * | |
95 | * SW1 SMSC 9220 | |
96 | * ----------------------- | |
97 | * ON access disable | |
98 | * OFF access enable | |
99 | */ | |
100 | ||
101 | /* | |
102 | * NAND Flash ROM | |
103 | * | |
104 | * SW1 | SW2 | SW7 | NAND Flash ROM | |
105 | * bit1 | bit1 bit2 | bit2 | Memory allocation | |
106 | * ------+------------+------+------------------ | |
107 | * OFF | ON OFF | ON | FCE 0 | |
108 | * OFF | ON OFF | OFF | FCE 1 | |
109 | */ | |
110 | ||
111 | /* | |
112 | * External interrupt pin settings | |
113 | * | |
114 | * IRQX | pin setting | device | level | |
115 | * ------+--------------------+--------------------+------- | |
116 | * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low | |
117 | * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High | |
118 | * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low | |
119 | * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low | |
120 | * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low | |
121 | * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High | |
122 | * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High | |
25338f2e | 123 | */ |
4b82b689 | 124 | |
25338f2e KM |
125 | /* |
126 | * USB | |
127 | * | |
128 | * USB0 : CN22 : Function | |
129 | * USB1 : CN31 : Function/Host *1 | |
130 | * | |
131 | * J30 (for CN31) *1 | |
132 | * ----------+---------------+------------- | |
133 | * 1-2 short | VBUS 5V | Host | |
134 | * open | external VBUS | Function | |
135 | * | |
136 | * *1 | |
137 | * CN31 is used as Host in Linux. | |
138 | */ | |
4b82b689 | 139 | |
1a44d72a KM |
140 | /* |
141 | * FIXME !! | |
142 | * | |
143 | * gpio_no_direction | |
144 | * are quick_hack. | |
145 | * | |
146 | * current gpio frame work doesn't have | |
147 | * the method to control only pull up/down/free. | |
148 | * this function should be replaced by correct gpio function | |
149 | */ | |
150 | static void __init gpio_no_direction(u32 addr) | |
151 | { | |
152 | __raw_writeb(0x00, addr); | |
153 | } | |
154 | ||
920adc75 KM |
155 | /* MTD */ |
156 | static struct mtd_partition nor_flash_partitions[] = { | |
157 | { | |
158 | .name = "loader", | |
159 | .offset = 0x00000000, | |
160 | .size = 512 * 1024, | |
161 | .mask_flags = MTD_WRITEABLE, | |
162 | }, | |
163 | { | |
164 | .name = "bootenv", | |
165 | .offset = MTDPART_OFS_APPEND, | |
166 | .size = 512 * 1024, | |
167 | .mask_flags = MTD_WRITEABLE, | |
168 | }, | |
169 | { | |
170 | .name = "kernel_ro", | |
171 | .offset = MTDPART_OFS_APPEND, | |
172 | .size = 8 * 1024 * 1024, | |
173 | .mask_flags = MTD_WRITEABLE, | |
174 | }, | |
175 | { | |
176 | .name = "kernel", | |
177 | .offset = MTDPART_OFS_APPEND, | |
178 | .size = 8 * 1024 * 1024, | |
179 | }, | |
180 | { | |
181 | .name = "data", | |
182 | .offset = MTDPART_OFS_APPEND, | |
183 | .size = MTDPART_SIZ_FULL, | |
184 | }, | |
185 | }; | |
186 | ||
187 | static struct physmap_flash_data nor_flash_data = { | |
188 | .width = 2, | |
189 | .parts = nor_flash_partitions, | |
190 | .nr_parts = ARRAY_SIZE(nor_flash_partitions), | |
191 | }; | |
192 | ||
193 | static struct resource nor_flash_resources[] = { | |
194 | [0] = { | |
195 | .start = 0x00000000, | |
196 | .end = 0x08000000 - 1, | |
197 | .flags = IORESOURCE_MEM, | |
198 | } | |
199 | }; | |
200 | ||
201 | static struct platform_device nor_flash_device = { | |
202 | .name = "physmap-flash", | |
203 | .dev = { | |
204 | .platform_data = &nor_flash_data, | |
205 | }, | |
206 | .num_resources = ARRAY_SIZE(nor_flash_resources), | |
207 | .resource = nor_flash_resources, | |
208 | }; | |
209 | ||
2264c151 KM |
210 | /* SMSC */ |
211 | static struct resource smc911x_resources[] = { | |
212 | { | |
213 | .start = 0x14000000, | |
214 | .end = 0x16000000 - 1, | |
215 | .flags = IORESOURCE_MEM, | |
216 | }, { | |
217 | .start = evt2irq(0x02c0) /* IRQ6A */, | |
218 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
219 | }, | |
220 | }; | |
221 | ||
222 | static struct smsc911x_platform_config smsc911x_info = { | |
223 | .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS, | |
224 | .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | |
225 | .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, | |
226 | }; | |
227 | ||
228 | static struct platform_device smc911x_device = { | |
229 | .name = "smsc911x", | |
230 | .id = -1, | |
231 | .num_resources = ARRAY_SIZE(smc911x_resources), | |
232 | .resource = smc911x_resources, | |
233 | .dev = { | |
234 | .platform_data = &smsc911x_info, | |
235 | }, | |
236 | }; | |
237 | ||
11fee467 KM |
238 | /* LCDC */ |
239 | static struct fb_videomode mackerel_lcdc_modes[] = { | |
240 | { | |
241 | .name = "WVGA Panel", | |
242 | .xres = 800, | |
243 | .yres = 480, | |
244 | .left_margin = 220, | |
245 | .right_margin = 110, | |
246 | .hsync_len = 70, | |
247 | .upper_margin = 20, | |
248 | .lower_margin = 5, | |
249 | .vsync_len = 5, | |
250 | .sync = 0, | |
251 | }, | |
252 | }; | |
253 | ||
254 | static struct sh_mobile_lcdc_info lcdc_info = { | |
255 | .clock_source = LCDC_CLK_BUS, | |
256 | .ch[0] = { | |
257 | .chan = LCDC_CHAN_MAINLCD, | |
258 | .bpp = 16, | |
259 | .lcd_cfg = mackerel_lcdc_modes, | |
260 | .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes), | |
261 | .interface_type = RGB24, | |
262 | .clock_divider = 2, | |
263 | .flags = 0, | |
264 | .lcd_size_cfg.width = 152, | |
265 | .lcd_size_cfg.height = 91, | |
266 | } | |
267 | }; | |
268 | ||
269 | static struct resource lcdc_resources[] = { | |
270 | [0] = { | |
271 | .name = "LCDC", | |
272 | .start = 0xfe940000, | |
273 | .end = 0xfe943fff, | |
274 | .flags = IORESOURCE_MEM, | |
275 | }, | |
276 | [1] = { | |
277 | .start = intcs_evt2irq(0x580), | |
278 | .flags = IORESOURCE_IRQ, | |
279 | }, | |
280 | }; | |
281 | ||
282 | static struct platform_device lcdc_device = { | |
283 | .name = "sh_mobile_lcdc_fb", | |
284 | .num_resources = ARRAY_SIZE(lcdc_resources), | |
285 | .resource = lcdc_resources, | |
286 | .dev = { | |
287 | .platform_data = &lcdc_info, | |
288 | .coherent_dma_mask = ~0, | |
289 | }, | |
290 | }; | |
291 | ||
25338f2e KM |
292 | /* USB1 (Host) */ |
293 | static void usb1_host_port_power(int port, int power) | |
294 | { | |
295 | if (!power) /* only power-on is supported for now */ | |
296 | return; | |
297 | ||
298 | /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ | |
299 | __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); | |
300 | } | |
301 | ||
302 | static struct r8a66597_platdata usb1_host_data = { | |
303 | .on_chip = 1, | |
304 | .port_power = usb1_host_port_power, | |
305 | }; | |
306 | ||
307 | static struct resource usb1_host_resources[] = { | |
308 | [0] = { | |
309 | .name = "USBHS", | |
310 | .start = 0xE68B0000, | |
311 | .end = 0xE68B00E6 - 1, | |
312 | .flags = IORESOURCE_MEM, | |
313 | }, | |
314 | [1] = { | |
315 | .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, | |
316 | .flags = IORESOURCE_IRQ, | |
317 | }, | |
318 | }; | |
319 | ||
320 | static struct platform_device usb1_host_device = { | |
321 | .name = "r8a66597_hcd", | |
322 | .id = 1, | |
323 | .dev = { | |
324 | .dma_mask = NULL, /* not use dma */ | |
325 | .coherent_dma_mask = 0xffffffff, | |
326 | .platform_data = &usb1_host_data, | |
327 | }, | |
328 | .num_resources = ARRAY_SIZE(usb1_host_resources), | |
329 | .resource = usb1_host_resources, | |
330 | }; | |
331 | ||
d44deb35 KM |
332 | /* LED */ |
333 | static struct gpio_led mackerel_leds[] = { | |
334 | { | |
335 | .name = "led0", | |
336 | .gpio = GPIO_PORT0, | |
337 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
338 | }, | |
339 | { | |
340 | .name = "led1", | |
341 | .gpio = GPIO_PORT1, | |
342 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
343 | }, | |
344 | { | |
345 | .name = "led2", | |
346 | .gpio = GPIO_PORT2, | |
347 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
348 | }, | |
349 | { | |
350 | .name = "led3", | |
351 | .gpio = GPIO_PORT159, | |
352 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
353 | } | |
354 | }; | |
355 | ||
356 | static struct gpio_led_platform_data mackerel_leds_pdata = { | |
357 | .leds = mackerel_leds, | |
358 | .num_leds = ARRAY_SIZE(mackerel_leds), | |
359 | }; | |
360 | ||
361 | static struct platform_device leds_device = { | |
362 | .name = "leds-gpio", | |
363 | .id = 0, | |
364 | .dev = { | |
365 | .platform_data = &mackerel_leds_pdata, | |
366 | }, | |
367 | }; | |
368 | ||
1a44d72a KM |
369 | /* FSI */ |
370 | #define IRQ_FSI evt2irq(0x1840) | |
371 | static struct sh_fsi_platform_info fsi_info = { | |
372 | .porta_flags = SH_FSI_BRS_INV | | |
373 | SH_FSI_OUT_SLAVE_MODE | | |
374 | SH_FSI_IN_SLAVE_MODE | | |
375 | SH_FSI_OFMT(PCM) | | |
376 | SH_FSI_IFMT(PCM), | |
377 | }; | |
378 | ||
379 | static struct resource fsi_resources[] = { | |
380 | [0] = { | |
381 | .name = "FSI", | |
382 | .start = 0xFE3C0000, | |
383 | .end = 0xFE3C0400 - 1, | |
384 | .flags = IORESOURCE_MEM, | |
385 | }, | |
386 | [1] = { | |
387 | .start = IRQ_FSI, | |
388 | .flags = IORESOURCE_IRQ, | |
389 | }, | |
390 | }; | |
391 | ||
392 | static struct platform_device fsi_device = { | |
393 | .name = "sh_fsi2", | |
394 | .id = -1, | |
395 | .num_resources = ARRAY_SIZE(fsi_resources), | |
396 | .resource = fsi_resources, | |
397 | .dev = { | |
398 | .platform_data = &fsi_info, | |
399 | }, | |
400 | }; | |
401 | ||
402 | static struct platform_device fsi_ak4643_device = { | |
403 | .name = "sh_fsi2_a_ak4643", | |
404 | }; | |
d44deb35 | 405 | |
920adc75 KM |
406 | static struct platform_device *mackerel_devices[] __initdata = { |
407 | &nor_flash_device, | |
2264c151 | 408 | &smc911x_device, |
11fee467 | 409 | &lcdc_device, |
25338f2e | 410 | &usb1_host_device, |
d44deb35 | 411 | &leds_device, |
1a44d72a KM |
412 | &fsi_device, |
413 | &fsi_ak4643_device, | |
414 | }; | |
415 | ||
416 | /* I2C */ | |
417 | static struct i2c_board_info i2c0_devices[] = { | |
418 | { | |
419 | I2C_BOARD_INFO("ak4643", 0x13), | |
420 | }, | |
920adc75 KM |
421 | }; |
422 | ||
423 | static struct map_desc mackerel_io_desc[] __initdata = { | |
424 | /* create a 1:1 entity map for 0xe6xxxxxx | |
425 | * used by CPGA, INTC and PFC. | |
426 | */ | |
427 | { | |
428 | .virtual = 0xe6000000, | |
429 | .pfn = __phys_to_pfn(0xe6000000), | |
430 | .length = 256 << 20, | |
431 | .type = MT_DEVICE_NONSHARED | |
432 | }, | |
433 | }; | |
434 | ||
435 | static void __init mackerel_map_io(void) | |
436 | { | |
437 | iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc)); | |
438 | ||
439 | /* setup early devices and console here as well */ | |
440 | sh7372_add_early_devices(); | |
441 | shmobile_setup_console(); | |
442 | } | |
443 | ||
1a44d72a KM |
444 | #define GPIO_PORT9CR 0xE6051009 |
445 | #define GPIO_PORT10CR 0xE605100A | |
920adc75 KM |
446 | static void __init mackerel_init(void) |
447 | { | |
448 | sh7372_pinmux_init(); | |
449 | ||
450 | /* enable SCIFA0 */ | |
451 | gpio_request(GPIO_FN_SCIFA0_TXD, NULL); | |
452 | gpio_request(GPIO_FN_SCIFA0_RXD, NULL); | |
453 | ||
2264c151 KM |
454 | /* enable SMSC911X */ |
455 | gpio_request(GPIO_FN_CS5A, NULL); | |
456 | gpio_request(GPIO_FN_IRQ6_39, NULL); | |
457 | ||
11fee467 | 458 | /* LCDC */ |
eb87e677 KM |
459 | gpio_request(GPIO_FN_LCDD23, NULL); |
460 | gpio_request(GPIO_FN_LCDD22, NULL); | |
461 | gpio_request(GPIO_FN_LCDD21, NULL); | |
462 | gpio_request(GPIO_FN_LCDD20, NULL); | |
463 | gpio_request(GPIO_FN_LCDD19, NULL); | |
464 | gpio_request(GPIO_FN_LCDD18, NULL); | |
11fee467 KM |
465 | gpio_request(GPIO_FN_LCDD17, NULL); |
466 | gpio_request(GPIO_FN_LCDD16, NULL); | |
467 | gpio_request(GPIO_FN_LCDD15, NULL); | |
468 | gpio_request(GPIO_FN_LCDD14, NULL); | |
469 | gpio_request(GPIO_FN_LCDD13, NULL); | |
470 | gpio_request(GPIO_FN_LCDD12, NULL); | |
471 | gpio_request(GPIO_FN_LCDD11, NULL); | |
472 | gpio_request(GPIO_FN_LCDD10, NULL); | |
473 | gpio_request(GPIO_FN_LCDD9, NULL); | |
474 | gpio_request(GPIO_FN_LCDD8, NULL); | |
475 | gpio_request(GPIO_FN_LCDD7, NULL); | |
476 | gpio_request(GPIO_FN_LCDD6, NULL); | |
477 | gpio_request(GPIO_FN_LCDD5, NULL); | |
478 | gpio_request(GPIO_FN_LCDD4, NULL); | |
479 | gpio_request(GPIO_FN_LCDD3, NULL); | |
480 | gpio_request(GPIO_FN_LCDD2, NULL); | |
481 | gpio_request(GPIO_FN_LCDD1, NULL); | |
482 | gpio_request(GPIO_FN_LCDD0, NULL); | |
483 | gpio_request(GPIO_FN_LCDDISP, NULL); | |
484 | gpio_request(GPIO_FN_LCDDCK, NULL); | |
485 | ||
486 | gpio_request(GPIO_PORT31, NULL); /* backlight */ | |
487 | gpio_direction_output(GPIO_PORT31, 1); | |
488 | ||
489 | gpio_request(GPIO_PORT151, NULL); /* LCDDON */ | |
490 | gpio_direction_output(GPIO_PORT151, 1); | |
491 | ||
25338f2e KM |
492 | /* USB enable */ |
493 | gpio_request(GPIO_FN_VBUS0_1, NULL); | |
494 | gpio_request(GPIO_FN_IDIN_1_18, NULL); | |
495 | gpio_request(GPIO_FN_PWEN_1_115, NULL); | |
496 | gpio_request(GPIO_FN_OVCN_1_114, NULL); | |
497 | gpio_request(GPIO_FN_EXTLP_1, NULL); | |
498 | gpio_request(GPIO_FN_OVCN2_1, NULL); | |
499 | ||
500 | /* setup USB phy */ | |
501 | __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ | |
502 | ||
1a44d72a KM |
503 | /* enable FSI2 port A (ak4643) */ |
504 | gpio_request(GPIO_FN_FSIAIBT, NULL); | |
505 | gpio_request(GPIO_FN_FSIAILR, NULL); | |
506 | gpio_request(GPIO_FN_FSIAISLD, NULL); | |
507 | gpio_request(GPIO_FN_FSIAOSLD, NULL); | |
508 | gpio_request(GPIO_PORT161, NULL); | |
509 | gpio_direction_output(GPIO_PORT161, 0); /* slave */ | |
510 | ||
511 | gpio_request(GPIO_PORT9, NULL); | |
512 | gpio_request(GPIO_PORT10, NULL); | |
513 | gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ | |
514 | gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ | |
515 | ||
516 | intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ | |
517 | ||
518 | ||
519 | i2c_register_board_info(0, i2c0_devices, | |
520 | ARRAY_SIZE(i2c0_devices)); | |
11fee467 | 521 | |
920adc75 KM |
522 | sh7372_add_standard_devices(); |
523 | ||
524 | platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); | |
525 | } | |
526 | ||
527 | static void __init mackerel_timer_init(void) | |
528 | { | |
529 | sh7372_clock_init(); | |
530 | shmobile_timer.init(); | |
531 | } | |
532 | ||
533 | static struct sys_timer mackerel_timer = { | |
534 | .init = mackerel_timer_init, | |
535 | }; | |
536 | ||
537 | MACHINE_START(MACKEREL, "mackerel") | |
538 | .map_io = mackerel_map_io, | |
539 | .init_irq = sh7372_init_irq, | |
540 | .init_machine = mackerel_init, | |
541 | .timer = &mackerel_timer, | |
542 | MACHINE_END |