]>
Commit | Line | Data |
---|---|---|
114abfe1 | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
8441add1 NA |
2 | /* |
3 | * Copyright (c) 2016 Andreas Färber | |
4 | * Copyright (c) 2016 BayLibre, Inc. | |
5 | * Author: Neil Armstrong <narmstrong@kernel.org> | |
8441add1 NA |
6 | */ |
7 | ||
8 | /dts-v1/; | |
9 | ||
10 | #include "meson-gxl-s905x.dtsi" | |
11 | ||
12 | / { | |
13 | compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl"; | |
14 | model = "NEXBOX A95X (S905X)"; | |
15 | ||
16 | aliases { | |
17 | serial0 = &uart_AO; | |
059a58fc | 18 | ethernet0 = ðmac; |
8441add1 NA |
19 | }; |
20 | ||
21 | chosen { | |
22 | stdout-path = "serial0:115200n8"; | |
23 | }; | |
24 | ||
25 | memory@0 { | |
26 | device_type = "memory"; | |
27 | reg = <0x0 0x0 0x0 0x80000000>; | |
28 | }; | |
29 | ||
30 | vddio_card: gpio-regulator { | |
31 | compatible = "regulator-gpio"; | |
32 | ||
33 | regulator-name = "VDDIO_CARD"; | |
34 | regulator-min-microvolt = <1800000>; | |
35 | regulator-max-microvolt = <3300000>; | |
36 | ||
37 | gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; | |
38 | gpios-states = <1>; | |
39 | ||
40 | /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ | |
41 | states = <1800000 0 | |
42 | 3300000 1>; | |
43 | }; | |
44 | ||
45 | vddio_boot: regulator-vddio_boot { | |
46 | compatible = "regulator-fixed"; | |
47 | regulator-name = "VDDIO_BOOT"; | |
48 | regulator-min-microvolt = <1800000>; | |
49 | regulator-max-microvolt = <1800000>; | |
50 | }; | |
51 | ||
52 | vddao_3v3: regulator-vddao_3v3 { | |
53 | compatible = "regulator-fixed"; | |
54 | regulator-name = "VDDAO_3V3"; | |
55 | regulator-min-microvolt = <3300000>; | |
56 | regulator-max-microvolt = <3300000>; | |
57 | }; | |
58 | ||
59 | vcc_3v3: regulator-vcc_3v3 { | |
60 | compatible = "regulator-fixed"; | |
61 | regulator-name = "VCC_3V3"; | |
62 | regulator-min-microvolt = <3300000>; | |
63 | regulator-max-microvolt = <3300000>; | |
64 | }; | |
65 | ||
66 | emmc_pwrseq: emmc-pwrseq { | |
67 | compatible = "mmc-pwrseq-emmc"; | |
68 | reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; | |
69 | }; | |
70 | ||
71 | wifi32k: wifi32k { | |
72 | compatible = "pwm-clock"; | |
73 | #clock-cells = <0>; | |
74 | clock-frequency = <32768>; | |
75 | pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ | |
76 | }; | |
77 | ||
78 | sdio_pwrseq: sdio-pwrseq { | |
79 | compatible = "mmc-pwrseq-simple"; | |
80 | reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; | |
81 | clocks = <&wifi32k>; | |
82 | clock-names = "ext_clock"; | |
83 | }; | |
fafdbdf7 NA |
84 | |
85 | cvbs-connector { | |
86 | compatible = "composite-video-connector"; | |
87 | ||
88 | port { | |
89 | cvbs_connector_in: endpoint { | |
90 | remote-endpoint = <&cvbs_vdac_out>; | |
91 | }; | |
92 | }; | |
93 | }; | |
6939db7e NA |
94 | |
95 | hdmi-connector { | |
96 | compatible = "hdmi-connector"; | |
97 | type = "a"; | |
98 | ||
99 | port { | |
100 | hdmi_connector_in: endpoint { | |
101 | remote-endpoint = <&hdmi_tx_tmds_out>; | |
102 | }; | |
103 | }; | |
104 | }; | |
8441add1 NA |
105 | }; |
106 | ||
b16c71c9 NA |
107 | &cec_AO { |
108 | status = "okay"; | |
109 | pinctrl-0 = <&ao_cec_pins>; | |
110 | pinctrl-names = "default"; | |
111 | hdmi-phandle = <&hdmi_tx>; | |
112 | }; | |
113 | ||
e02849b9 AF |
114 | &cvbs_vdac_port { |
115 | cvbs_vdac_out: endpoint { | |
116 | remote-endpoint = <&cvbs_connector_in>; | |
117 | }; | |
8441add1 NA |
118 | }; |
119 | ||
120 | ðmac { | |
121 | status = "okay"; | |
122 | phy-mode = "rmii"; | |
123 | phy-handle = <&internal_phy>; | |
124 | }; | |
125 | ||
e02849b9 AF |
126 | &hdmi_tx { |
127 | status = "okay"; | |
128 | pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; | |
129 | pinctrl-names = "default"; | |
130 | }; | |
131 | ||
132 | &hdmi_tx_tmds_port { | |
133 | hdmi_tx_tmds_out: endpoint { | |
134 | remote-endpoint = <&hdmi_connector_in>; | |
135 | }; | |
136 | }; | |
137 | ||
8441add1 NA |
138 | &ir { |
139 | status = "okay"; | |
140 | pinctrl-0 = <&remote_input_ao_pins>; | |
141 | pinctrl-names = "default"; | |
142 | }; | |
143 | ||
e02849b9 AF |
144 | &pwm_ef { |
145 | status = "okay"; | |
146 | pinctrl-0 = <&pwm_e_pins>; | |
147 | pinctrl-names = "default"; | |
148 | clocks = <&clkc CLKID_FCLK_DIV4>; | |
149 | clock-names = "clkin0"; | |
150 | }; | |
151 | ||
8441add1 NA |
152 | /* Wireless SDIO Module */ |
153 | &sd_emmc_a { | |
154 | status = "okay"; | |
155 | pinctrl-0 = <&sdio_pins>; | |
67e7607f JB |
156 | pinctrl-1 = <&sdio_clk_gate_pins>; |
157 | pinctrl-names = "default", "clk-gate"; | |
8441add1 NA |
158 | #address-cells = <1>; |
159 | #size-cells = <0>; | |
160 | ||
161 | bus-width = <4>; | |
162 | cap-sd-highspeed; | |
163 | max-frequency = <100000000>; | |
164 | ||
165 | non-removable; | |
166 | disable-wp; | |
167 | ||
168 | mmc-pwrseq = <&sdio_pwrseq>; | |
169 | ||
170 | vmmc-supply = <&vddao_3v3>; | |
171 | vqmmc-supply = <&vddio_boot>; | |
172 | }; | |
173 | ||
174 | /* SD card */ | |
175 | &sd_emmc_b { | |
176 | status = "okay"; | |
177 | pinctrl-0 = <&sdcard_pins>; | |
67e7607f JB |
178 | pinctrl-1 = <&sdcard_clk_gate_pins>; |
179 | pinctrl-names = "default", "clk-gate"; | |
8441add1 NA |
180 | |
181 | bus-width = <4>; | |
182 | cap-sd-highspeed; | |
183 | max-frequency = <100000000>; | |
184 | disable-wp; | |
185 | ||
f29200c8 | 186 | cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; |
8441add1 NA |
187 | |
188 | vmmc-supply = <&vddao_3v3>; | |
189 | vqmmc-supply = <&vddio_card>; | |
190 | }; | |
191 | ||
192 | /* eMMC */ | |
193 | &sd_emmc_c { | |
194 | status = "okay"; | |
ab36be66 | 195 | pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; |
67e7607f JB |
196 | pinctrl-1 = <&emmc_clk_gate_pins>; |
197 | pinctrl-names = "default", "clk-gate"; | |
8441add1 NA |
198 | |
199 | bus-width = <8>; | |
8441add1 NA |
200 | cap-mmc-highspeed; |
201 | max-frequency = <200000000>; | |
202 | non-removable; | |
203 | disable-wp; | |
204 | mmc-ddr-1_8v; | |
205 | mmc-hs200-1_8v; | |
206 | ||
207 | mmc-pwrseq = <&emmc_pwrseq>; | |
208 | vmmc-supply = <&vcc_3v3>; | |
209 | vqmmc-supply = <&vddio_boot>; | |
210 | }; | |
211 | ||
e02849b9 | 212 | &uart_AO { |
6939db7e | 213 | status = "okay"; |
e02849b9 | 214 | pinctrl-0 = <&uart_ao_a_pins>; |
6939db7e NA |
215 | pinctrl-names = "default"; |
216 | }; | |
55ef3224 MB |
217 | |
218 | &usb0 { | |
219 | status = "okay"; | |
220 | }; |