]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Intel IO-APIC support for multi-Pentium hosts. | |
3 | * | |
4 | * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo | |
5 | * | |
6 | * Many thanks to Stig Venaas for trying out countless experimental | |
7 | * patches and reporting/debugging problems patiently! | |
8 | * | |
9 | * (c) 1999, Multiple IO-APIC support, developed by | |
10 | * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and | |
11 | * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, | |
12 | * further tested and cleaned up by Zach Brown <zab@redhat.com> | |
13 | * and Ingo Molnar <mingo@redhat.com> | |
14 | * | |
15 | * Fixes | |
16 | * Maciej W. Rozycki : Bits for genuine 82489DX APICs; | |
17 | * thanks to Eric Gilmore | |
18 | * and Rolf G. Tews | |
19 | * for testing these extensively | |
20 | * Paul Diefenbaugh : Added full ACPI support | |
21 | */ | |
22 | ||
23 | #include <linux/mm.h> | |
1da177e4 LT |
24 | #include <linux/interrupt.h> |
25 | #include <linux/init.h> | |
26 | #include <linux/delay.h> | |
27 | #include <linux/sched.h> | |
28 | #include <linux/config.h> | |
29 | #include <linux/smp_lock.h> | |
30 | #include <linux/mc146818rtc.h> | |
31 | #include <linux/compiler.h> | |
32 | #include <linux/acpi.h> | |
129f6946 | 33 | #include <linux/module.h> |
1da177e4 | 34 | #include <linux/sysdev.h> |
54d5d424 | 35 | |
1da177e4 LT |
36 | #include <asm/io.h> |
37 | #include <asm/smp.h> | |
38 | #include <asm/desc.h> | |
39 | #include <asm/timer.h> | |
306e440d | 40 | #include <asm/i8259.h> |
1da177e4 LT |
41 | |
42 | #include <mach_apic.h> | |
43 | ||
44 | #include "io_ports.h" | |
45 | ||
46 | int (*ioapic_renumber_irq)(int ioapic, int irq); | |
47 | atomic_t irq_mis_count; | |
48 | ||
fcfd636a EB |
49 | /* Where if anywhere is the i8259 connect in external int mode */ |
50 | static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; | |
51 | ||
1da177e4 | 52 | static DEFINE_SPINLOCK(ioapic_lock); |
0a1ad60d | 53 | static DEFINE_SPINLOCK(vector_lock); |
1da177e4 | 54 | |
f9262c12 AK |
55 | int timer_over_8254 __initdata = 1; |
56 | ||
1da177e4 LT |
57 | /* |
58 | * Is the SiS APIC rmw bug present ? | |
59 | * -1 = don't know, 0 = no, 1 = yes | |
60 | */ | |
61 | int sis_apic_bug = -1; | |
62 | ||
63 | /* | |
64 | * # of IRQ routing registers | |
65 | */ | |
66 | int nr_ioapic_registers[MAX_IO_APICS]; | |
67 | ||
66759a01 CE |
68 | int disable_timer_pin_1 __initdata; |
69 | ||
1da177e4 LT |
70 | /* |
71 | * Rough estimation of how many shared IRQs there are, can | |
72 | * be changed anytime. | |
73 | */ | |
74 | #define MAX_PLUS_SHARED_IRQS NR_IRQS | |
75 | #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) | |
76 | ||
77 | /* | |
78 | * This is performance-critical, we want to do it O(1) | |
79 | * | |
80 | * the indexing order of this array favors 1:1 mappings | |
81 | * between pins and IRQs. | |
82 | */ | |
83 | ||
84 | static struct irq_pin_list { | |
85 | int apic, pin, next; | |
86 | } irq_2_pin[PIN_MAP_SIZE]; | |
87 | ||
6c231b7b | 88 | int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; |
1da177e4 LT |
89 | #ifdef CONFIG_PCI_MSI |
90 | #define vector_to_irq(vector) \ | |
91 | (platform_legacy_irq(vector) ? vector : vector_irq[vector]) | |
92 | #else | |
93 | #define vector_to_irq(vector) (vector) | |
94 | #endif | |
95 | ||
96 | /* | |
97 | * The common case is 1:1 IRQ<->pin mappings. Sometimes there are | |
98 | * shared ISA-space IRQs, so we have to support them. We are super | |
99 | * fast in the common case, and fast for shared ISA-space IRQs. | |
100 | */ | |
101 | static void add_pin_to_irq(unsigned int irq, int apic, int pin) | |
102 | { | |
103 | static int first_free_entry = NR_IRQS; | |
104 | struct irq_pin_list *entry = irq_2_pin + irq; | |
105 | ||
106 | while (entry->next) | |
107 | entry = irq_2_pin + entry->next; | |
108 | ||
109 | if (entry->pin != -1) { | |
110 | entry->next = first_free_entry; | |
111 | entry = irq_2_pin + entry->next; | |
112 | if (++first_free_entry >= PIN_MAP_SIZE) | |
113 | panic("io_apic.c: whoops"); | |
114 | } | |
115 | entry->apic = apic; | |
116 | entry->pin = pin; | |
117 | } | |
118 | ||
119 | /* | |
120 | * Reroute an IRQ to a different pin. | |
121 | */ | |
122 | static void __init replace_pin_at_irq(unsigned int irq, | |
123 | int oldapic, int oldpin, | |
124 | int newapic, int newpin) | |
125 | { | |
126 | struct irq_pin_list *entry = irq_2_pin + irq; | |
127 | ||
128 | while (1) { | |
129 | if (entry->apic == oldapic && entry->pin == oldpin) { | |
130 | entry->apic = newapic; | |
131 | entry->pin = newpin; | |
132 | } | |
133 | if (!entry->next) | |
134 | break; | |
135 | entry = irq_2_pin + entry->next; | |
136 | } | |
137 | } | |
138 | ||
139 | static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) | |
140 | { | |
141 | struct irq_pin_list *entry = irq_2_pin + irq; | |
142 | unsigned int pin, reg; | |
143 | ||
144 | for (;;) { | |
145 | pin = entry->pin; | |
146 | if (pin == -1) | |
147 | break; | |
148 | reg = io_apic_read(entry->apic, 0x10 + pin*2); | |
149 | reg &= ~disable; | |
150 | reg |= enable; | |
151 | io_apic_modify(entry->apic, 0x10 + pin*2, reg); | |
152 | if (!entry->next) | |
153 | break; | |
154 | entry = irq_2_pin + entry->next; | |
155 | } | |
156 | } | |
157 | ||
158 | /* mask = 1 */ | |
159 | static void __mask_IO_APIC_irq (unsigned int irq) | |
160 | { | |
161 | __modify_IO_APIC_irq(irq, 0x00010000, 0); | |
162 | } | |
163 | ||
164 | /* mask = 0 */ | |
165 | static void __unmask_IO_APIC_irq (unsigned int irq) | |
166 | { | |
167 | __modify_IO_APIC_irq(irq, 0, 0x00010000); | |
168 | } | |
169 | ||
170 | /* mask = 1, trigger = 0 */ | |
171 | static void __mask_and_edge_IO_APIC_irq (unsigned int irq) | |
172 | { | |
173 | __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); | |
174 | } | |
175 | ||
176 | /* mask = 0, trigger = 1 */ | |
177 | static void __unmask_and_level_IO_APIC_irq (unsigned int irq) | |
178 | { | |
179 | __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); | |
180 | } | |
181 | ||
182 | static void mask_IO_APIC_irq (unsigned int irq) | |
183 | { | |
184 | unsigned long flags; | |
185 | ||
186 | spin_lock_irqsave(&ioapic_lock, flags); | |
187 | __mask_IO_APIC_irq(irq); | |
188 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
189 | } | |
190 | ||
191 | static void unmask_IO_APIC_irq (unsigned int irq) | |
192 | { | |
193 | unsigned long flags; | |
194 | ||
195 | spin_lock_irqsave(&ioapic_lock, flags); | |
196 | __unmask_IO_APIC_irq(irq); | |
197 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
198 | } | |
199 | ||
200 | static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) | |
201 | { | |
202 | struct IO_APIC_route_entry entry; | |
203 | unsigned long flags; | |
204 | ||
205 | /* Check delivery_mode to be sure we're not clearing an SMI pin */ | |
206 | spin_lock_irqsave(&ioapic_lock, flags); | |
207 | *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); | |
208 | *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); | |
209 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
210 | if (entry.delivery_mode == dest_SMI) | |
211 | return; | |
212 | ||
213 | /* | |
214 | * Disable it in the IO-APIC irq-routing table: | |
215 | */ | |
216 | memset(&entry, 0, sizeof(entry)); | |
217 | entry.mask = 1; | |
218 | spin_lock_irqsave(&ioapic_lock, flags); | |
219 | io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0)); | |
220 | io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1)); | |
221 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
222 | } | |
223 | ||
224 | static void clear_IO_APIC (void) | |
225 | { | |
226 | int apic, pin; | |
227 | ||
228 | for (apic = 0; apic < nr_ioapics; apic++) | |
229 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) | |
230 | clear_IO_APIC_pin(apic, pin); | |
231 | } | |
232 | ||
54d5d424 | 233 | #ifdef CONFIG_SMP |
1da177e4 LT |
234 | static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) |
235 | { | |
236 | unsigned long flags; | |
237 | int pin; | |
238 | struct irq_pin_list *entry = irq_2_pin + irq; | |
239 | unsigned int apicid_value; | |
54d5d424 | 240 | cpumask_t tmp; |
1da177e4 | 241 | |
54d5d424 AR |
242 | cpus_and(tmp, cpumask, cpu_online_map); |
243 | if (cpus_empty(tmp)) | |
244 | tmp = TARGET_CPUS; | |
245 | ||
246 | cpus_and(cpumask, tmp, CPU_MASK_ALL); | |
247 | ||
1da177e4 LT |
248 | apicid_value = cpu_mask_to_apicid(cpumask); |
249 | /* Prepare to do the io_apic_write */ | |
250 | apicid_value = apicid_value << 24; | |
251 | spin_lock_irqsave(&ioapic_lock, flags); | |
252 | for (;;) { | |
253 | pin = entry->pin; | |
254 | if (pin == -1) | |
255 | break; | |
256 | io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value); | |
257 | if (!entry->next) | |
258 | break; | |
259 | entry = irq_2_pin + entry->next; | |
260 | } | |
54d5d424 | 261 | set_irq_info(irq, cpumask); |
1da177e4 LT |
262 | spin_unlock_irqrestore(&ioapic_lock, flags); |
263 | } | |
264 | ||
265 | #if defined(CONFIG_IRQBALANCE) | |
266 | # include <asm/processor.h> /* kernel_thread() */ | |
267 | # include <linux/kernel_stat.h> /* kstat */ | |
268 | # include <linux/slab.h> /* kmalloc() */ | |
269 | # include <linux/timer.h> /* time_after() */ | |
270 | ||
1b61b910 | 271 | #ifdef CONFIG_BALANCED_IRQ_DEBUG |
1da177e4 LT |
272 | # define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0) |
273 | # define Dprintk(x...) do { TDprintk(x); } while (0) | |
274 | # else | |
275 | # define TDprintk(x...) | |
276 | # define Dprintk(x...) | |
277 | # endif | |
278 | ||
1da177e4 | 279 | #define IRQBALANCE_CHECK_ARCH -999 |
1b61b910 ZY |
280 | #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) |
281 | #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) | |
282 | #define BALANCED_IRQ_MORE_DELTA (HZ/10) | |
283 | #define BALANCED_IRQ_LESS_DELTA (HZ) | |
284 | ||
285 | static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH; | |
286 | static int physical_balance __read_mostly; | |
287 | static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; | |
1da177e4 LT |
288 | |
289 | static struct irq_cpu_info { | |
290 | unsigned long * last_irq; | |
291 | unsigned long * irq_delta; | |
292 | unsigned long irq; | |
293 | } irq_cpu_data[NR_CPUS]; | |
294 | ||
295 | #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) | |
296 | #define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) | |
297 | #define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) | |
298 | ||
299 | #define IDLE_ENOUGH(cpu,now) \ | |
300 | (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) | |
301 | ||
302 | #define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask) | |
303 | ||
304 | #define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i])) | |
305 | ||
1b61b910 ZY |
306 | static cpumask_t balance_irq_affinity[NR_IRQS] = { |
307 | [0 ... NR_IRQS-1] = CPU_MASK_ALL | |
308 | }; | |
1da177e4 | 309 | |
1b61b910 ZY |
310 | void set_balance_irq_affinity(unsigned int irq, cpumask_t mask) |
311 | { | |
312 | balance_irq_affinity[irq] = mask; | |
313 | } | |
1da177e4 LT |
314 | |
315 | static unsigned long move(int curr_cpu, cpumask_t allowed_mask, | |
316 | unsigned long now, int direction) | |
317 | { | |
318 | int search_idle = 1; | |
319 | int cpu = curr_cpu; | |
320 | ||
321 | goto inside; | |
322 | ||
323 | do { | |
324 | if (unlikely(cpu == curr_cpu)) | |
325 | search_idle = 0; | |
326 | inside: | |
327 | if (direction == 1) { | |
328 | cpu++; | |
329 | if (cpu >= NR_CPUS) | |
330 | cpu = 0; | |
331 | } else { | |
332 | cpu--; | |
333 | if (cpu == -1) | |
334 | cpu = NR_CPUS-1; | |
335 | } | |
336 | } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || | |
337 | (search_idle && !IDLE_ENOUGH(cpu,now))); | |
338 | ||
339 | return cpu; | |
340 | } | |
341 | ||
342 | static inline void balance_irq(int cpu, int irq) | |
343 | { | |
344 | unsigned long now = jiffies; | |
345 | cpumask_t allowed_mask; | |
346 | unsigned int new_cpu; | |
347 | ||
348 | if (irqbalance_disabled) | |
349 | return; | |
350 | ||
1b61b910 | 351 | cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); |
1da177e4 LT |
352 | new_cpu = move(cpu, allowed_mask, now, 1); |
353 | if (cpu != new_cpu) { | |
54d5d424 | 354 | set_pending_irq(irq, cpumask_of_cpu(new_cpu)); |
1da177e4 LT |
355 | } |
356 | } | |
357 | ||
358 | static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) | |
359 | { | |
360 | int i, j; | |
361 | Dprintk("Rotating IRQs among CPUs.\n"); | |
394e3902 AM |
362 | for_each_online_cpu(i) { |
363 | for (j = 0; j < NR_IRQS; j++) { | |
1da177e4 LT |
364 | if (!irq_desc[j].action) |
365 | continue; | |
366 | /* Is it a significant load ? */ | |
367 | if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < | |
368 | useful_load_threshold) | |
369 | continue; | |
370 | balance_irq(i, j); | |
371 | } | |
372 | } | |
373 | balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, | |
374 | balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); | |
375 | return; | |
376 | } | |
377 | ||
378 | static void do_irq_balance(void) | |
379 | { | |
380 | int i, j; | |
381 | unsigned long max_cpu_irq = 0, min_cpu_irq = (~0); | |
382 | unsigned long move_this_load = 0; | |
383 | int max_loaded = 0, min_loaded = 0; | |
384 | int load; | |
385 | unsigned long useful_load_threshold = balanced_irq_interval + 10; | |
386 | int selected_irq; | |
387 | int tmp_loaded, first_attempt = 1; | |
388 | unsigned long tmp_cpu_irq; | |
389 | unsigned long imbalance = 0; | |
390 | cpumask_t allowed_mask, target_cpu_mask, tmp; | |
391 | ||
c8912599 | 392 | for_each_possible_cpu(i) { |
1da177e4 LT |
393 | int package_index; |
394 | CPU_IRQ(i) = 0; | |
395 | if (!cpu_online(i)) | |
396 | continue; | |
397 | package_index = CPU_TO_PACKAGEINDEX(i); | |
398 | for (j = 0; j < NR_IRQS; j++) { | |
399 | unsigned long value_now, delta; | |
400 | /* Is this an active IRQ? */ | |
401 | if (!irq_desc[j].action) | |
402 | continue; | |
403 | if ( package_index == i ) | |
404 | IRQ_DELTA(package_index,j) = 0; | |
405 | /* Determine the total count per processor per IRQ */ | |
406 | value_now = (unsigned long) kstat_cpu(i).irqs[j]; | |
407 | ||
408 | /* Determine the activity per processor per IRQ */ | |
409 | delta = value_now - LAST_CPU_IRQ(i,j); | |
410 | ||
411 | /* Update last_cpu_irq[][] for the next time */ | |
412 | LAST_CPU_IRQ(i,j) = value_now; | |
413 | ||
414 | /* Ignore IRQs whose rate is less than the clock */ | |
415 | if (delta < useful_load_threshold) | |
416 | continue; | |
417 | /* update the load for the processor or package total */ | |
418 | IRQ_DELTA(package_index,j) += delta; | |
419 | ||
420 | /* Keep track of the higher numbered sibling as well */ | |
421 | if (i != package_index) | |
422 | CPU_IRQ(i) += delta; | |
423 | /* | |
424 | * We have sibling A and sibling B in the package | |
425 | * | |
426 | * cpu_irq[A] = load for cpu A + load for cpu B | |
427 | * cpu_irq[B] = load for cpu B | |
428 | */ | |
429 | CPU_IRQ(package_index) += delta; | |
430 | } | |
431 | } | |
432 | /* Find the least loaded processor package */ | |
394e3902 | 433 | for_each_online_cpu(i) { |
1da177e4 LT |
434 | if (i != CPU_TO_PACKAGEINDEX(i)) |
435 | continue; | |
436 | if (min_cpu_irq > CPU_IRQ(i)) { | |
437 | min_cpu_irq = CPU_IRQ(i); | |
438 | min_loaded = i; | |
439 | } | |
440 | } | |
441 | max_cpu_irq = ULONG_MAX; | |
442 | ||
443 | tryanothercpu: | |
444 | /* Look for heaviest loaded processor. | |
445 | * We may come back to get the next heaviest loaded processor. | |
446 | * Skip processors with trivial loads. | |
447 | */ | |
448 | tmp_cpu_irq = 0; | |
449 | tmp_loaded = -1; | |
394e3902 | 450 | for_each_online_cpu(i) { |
1da177e4 LT |
451 | if (i != CPU_TO_PACKAGEINDEX(i)) |
452 | continue; | |
453 | if (max_cpu_irq <= CPU_IRQ(i)) | |
454 | continue; | |
455 | if (tmp_cpu_irq < CPU_IRQ(i)) { | |
456 | tmp_cpu_irq = CPU_IRQ(i); | |
457 | tmp_loaded = i; | |
458 | } | |
459 | } | |
460 | ||
461 | if (tmp_loaded == -1) { | |
462 | /* In the case of small number of heavy interrupt sources, | |
463 | * loading some of the cpus too much. We use Ingo's original | |
464 | * approach to rotate them around. | |
465 | */ | |
466 | if (!first_attempt && imbalance >= useful_load_threshold) { | |
467 | rotate_irqs_among_cpus(useful_load_threshold); | |
468 | return; | |
469 | } | |
470 | goto not_worth_the_effort; | |
471 | } | |
472 | ||
473 | first_attempt = 0; /* heaviest search */ | |
474 | max_cpu_irq = tmp_cpu_irq; /* load */ | |
475 | max_loaded = tmp_loaded; /* processor */ | |
476 | imbalance = (max_cpu_irq - min_cpu_irq) / 2; | |
477 | ||
478 | Dprintk("max_loaded cpu = %d\n", max_loaded); | |
479 | Dprintk("min_loaded cpu = %d\n", min_loaded); | |
480 | Dprintk("max_cpu_irq load = %ld\n", max_cpu_irq); | |
481 | Dprintk("min_cpu_irq load = %ld\n", min_cpu_irq); | |
482 | Dprintk("load imbalance = %lu\n", imbalance); | |
483 | ||
484 | /* if imbalance is less than approx 10% of max load, then | |
485 | * observe diminishing returns action. - quit | |
486 | */ | |
487 | if (imbalance < (max_cpu_irq >> 3)) { | |
488 | Dprintk("Imbalance too trivial\n"); | |
489 | goto not_worth_the_effort; | |
490 | } | |
491 | ||
492 | tryanotherirq: | |
493 | /* if we select an IRQ to move that can't go where we want, then | |
494 | * see if there is another one to try. | |
495 | */ | |
496 | move_this_load = 0; | |
497 | selected_irq = -1; | |
498 | for (j = 0; j < NR_IRQS; j++) { | |
499 | /* Is this an active IRQ? */ | |
500 | if (!irq_desc[j].action) | |
501 | continue; | |
502 | if (imbalance <= IRQ_DELTA(max_loaded,j)) | |
503 | continue; | |
504 | /* Try to find the IRQ that is closest to the imbalance | |
505 | * without going over. | |
506 | */ | |
507 | if (move_this_load < IRQ_DELTA(max_loaded,j)) { | |
508 | move_this_load = IRQ_DELTA(max_loaded,j); | |
509 | selected_irq = j; | |
510 | } | |
511 | } | |
512 | if (selected_irq == -1) { | |
513 | goto tryanothercpu; | |
514 | } | |
515 | ||
516 | imbalance = move_this_load; | |
517 | ||
518 | /* For physical_balance case, we accumlated both load | |
519 | * values in the one of the siblings cpu_irq[], | |
520 | * to use the same code for physical and logical processors | |
521 | * as much as possible. | |
522 | * | |
523 | * NOTE: the cpu_irq[] array holds the sum of the load for | |
524 | * sibling A and sibling B in the slot for the lowest numbered | |
525 | * sibling (A), _AND_ the load for sibling B in the slot for | |
526 | * the higher numbered sibling. | |
527 | * | |
528 | * We seek the least loaded sibling by making the comparison | |
529 | * (A+B)/2 vs B | |
530 | */ | |
531 | load = CPU_IRQ(min_loaded) >> 1; | |
532 | for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) { | |
533 | if (load > CPU_IRQ(j)) { | |
534 | /* This won't change cpu_sibling_map[min_loaded] */ | |
535 | load = CPU_IRQ(j); | |
536 | min_loaded = j; | |
537 | } | |
538 | } | |
539 | ||
1b61b910 ZY |
540 | cpus_and(allowed_mask, |
541 | cpu_online_map, | |
542 | balance_irq_affinity[selected_irq]); | |
1da177e4 LT |
543 | target_cpu_mask = cpumask_of_cpu(min_loaded); |
544 | cpus_and(tmp, target_cpu_mask, allowed_mask); | |
545 | ||
546 | if (!cpus_empty(tmp)) { | |
1da177e4 LT |
547 | |
548 | Dprintk("irq = %d moved to cpu = %d\n", | |
549 | selected_irq, min_loaded); | |
550 | /* mark for change destination */ | |
54d5d424 AR |
551 | set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); |
552 | ||
1da177e4 LT |
553 | /* Since we made a change, come back sooner to |
554 | * check for more variation. | |
555 | */ | |
556 | balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, | |
557 | balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); | |
558 | return; | |
559 | } | |
560 | goto tryanotherirq; | |
561 | ||
562 | not_worth_the_effort: | |
563 | /* | |
564 | * if we did not find an IRQ to move, then adjust the time interval | |
565 | * upward | |
566 | */ | |
567 | balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, | |
568 | balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); | |
569 | Dprintk("IRQ worth rotating not found\n"); | |
570 | return; | |
571 | } | |
572 | ||
573 | static int balanced_irq(void *unused) | |
574 | { | |
575 | int i; | |
576 | unsigned long prev_balance_time = jiffies; | |
577 | long time_remaining = balanced_irq_interval; | |
578 | ||
579 | daemonize("kirqd"); | |
580 | ||
581 | /* push everything to CPU 0 to give us a starting point. */ | |
582 | for (i = 0 ; i < NR_IRQS ; i++) { | |
54d5d424 AR |
583 | pending_irq_cpumask[i] = cpumask_of_cpu(0); |
584 | set_pending_irq(i, cpumask_of_cpu(0)); | |
1da177e4 LT |
585 | } |
586 | ||
587 | for ( ; ; ) { | |
52e6e630 | 588 | time_remaining = schedule_timeout_interruptible(time_remaining); |
3e1d1d28 | 589 | try_to_freeze(); |
1da177e4 LT |
590 | if (time_after(jiffies, |
591 | prev_balance_time+balanced_irq_interval)) { | |
f3705136 | 592 | preempt_disable(); |
1da177e4 LT |
593 | do_irq_balance(); |
594 | prev_balance_time = jiffies; | |
595 | time_remaining = balanced_irq_interval; | |
f3705136 | 596 | preempt_enable(); |
1da177e4 LT |
597 | } |
598 | } | |
599 | return 0; | |
600 | } | |
601 | ||
602 | static int __init balanced_irq_init(void) | |
603 | { | |
604 | int i; | |
605 | struct cpuinfo_x86 *c; | |
606 | cpumask_t tmp; | |
607 | ||
608 | cpus_shift_right(tmp, cpu_online_map, 2); | |
609 | c = &boot_cpu_data; | |
610 | /* When not overwritten by the command line ask subarchitecture. */ | |
611 | if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) | |
612 | irqbalance_disabled = NO_BALANCE_IRQ; | |
613 | if (irqbalance_disabled) | |
614 | return 0; | |
615 | ||
616 | /* disable irqbalance completely if there is only one processor online */ | |
617 | if (num_online_cpus() < 2) { | |
618 | irqbalance_disabled = 1; | |
619 | return 0; | |
620 | } | |
621 | /* | |
622 | * Enable physical balance only if more than 1 physical processor | |
623 | * is present | |
624 | */ | |
625 | if (smp_num_siblings > 1 && !cpus_empty(tmp)) | |
626 | physical_balance = 1; | |
627 | ||
394e3902 | 628 | for_each_online_cpu(i) { |
1da177e4 LT |
629 | irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); |
630 | irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); | |
631 | if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { | |
632 | printk(KERN_ERR "balanced_irq_init: out of memory"); | |
633 | goto failed; | |
634 | } | |
635 | memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); | |
636 | memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); | |
637 | } | |
638 | ||
639 | printk(KERN_INFO "Starting balanced_irq\n"); | |
640 | if (kernel_thread(balanced_irq, NULL, CLONE_KERNEL) >= 0) | |
641 | return 0; | |
642 | else | |
643 | printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); | |
644 | failed: | |
c8912599 | 645 | for_each_possible_cpu(i) { |
4ae6673e | 646 | kfree(irq_cpu_data[i].irq_delta); |
394e3902 | 647 | irq_cpu_data[i].irq_delta = NULL; |
4ae6673e | 648 | kfree(irq_cpu_data[i].last_irq); |
394e3902 | 649 | irq_cpu_data[i].last_irq = NULL; |
1da177e4 LT |
650 | } |
651 | return 0; | |
652 | } | |
653 | ||
654 | int __init irqbalance_disable(char *str) | |
655 | { | |
656 | irqbalance_disabled = 1; | |
9b41046c | 657 | return 1; |
1da177e4 LT |
658 | } |
659 | ||
660 | __setup("noirqbalance", irqbalance_disable); | |
661 | ||
1da177e4 | 662 | late_initcall(balanced_irq_init); |
1da177e4 | 663 | #endif /* CONFIG_IRQBALANCE */ |
54d5d424 | 664 | #endif /* CONFIG_SMP */ |
1da177e4 LT |
665 | |
666 | #ifndef CONFIG_SMP | |
667 | void fastcall send_IPI_self(int vector) | |
668 | { | |
669 | unsigned int cfg; | |
670 | ||
671 | /* | |
672 | * Wait for idle. | |
673 | */ | |
674 | apic_wait_icr_idle(); | |
675 | cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL; | |
676 | /* | |
677 | * Send the IPI. The write to APIC_ICR fires this off. | |
678 | */ | |
679 | apic_write_around(APIC_ICR, cfg); | |
680 | } | |
681 | #endif /* !CONFIG_SMP */ | |
682 | ||
683 | ||
684 | /* | |
685 | * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to | |
686 | * specific CPU-side IRQs. | |
687 | */ | |
688 | ||
689 | #define MAX_PIRQS 8 | |
690 | static int pirq_entries [MAX_PIRQS]; | |
691 | static int pirqs_enabled; | |
692 | int skip_ioapic_setup; | |
693 | ||
694 | static int __init ioapic_setup(char *str) | |
695 | { | |
696 | skip_ioapic_setup = 1; | |
697 | return 1; | |
698 | } | |
699 | ||
700 | __setup("noapic", ioapic_setup); | |
701 | ||
702 | static int __init ioapic_pirq_setup(char *str) | |
703 | { | |
704 | int i, max; | |
705 | int ints[MAX_PIRQS+1]; | |
706 | ||
707 | get_options(str, ARRAY_SIZE(ints), ints); | |
708 | ||
709 | for (i = 0; i < MAX_PIRQS; i++) | |
710 | pirq_entries[i] = -1; | |
711 | ||
712 | pirqs_enabled = 1; | |
713 | apic_printk(APIC_VERBOSE, KERN_INFO | |
714 | "PIRQ redirection, working around broken MP-BIOS.\n"); | |
715 | max = MAX_PIRQS; | |
716 | if (ints[0] < MAX_PIRQS) | |
717 | max = ints[0]; | |
718 | ||
719 | for (i = 0; i < max; i++) { | |
720 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
721 | "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); | |
722 | /* | |
723 | * PIRQs are mapped upside down, usually. | |
724 | */ | |
725 | pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; | |
726 | } | |
727 | return 1; | |
728 | } | |
729 | ||
730 | __setup("pirq=", ioapic_pirq_setup); | |
731 | ||
732 | /* | |
733 | * Find the IRQ entry number of a certain pin. | |
734 | */ | |
735 | static int find_irq_entry(int apic, int pin, int type) | |
736 | { | |
737 | int i; | |
738 | ||
739 | for (i = 0; i < mp_irq_entries; i++) | |
740 | if (mp_irqs[i].mpc_irqtype == type && | |
741 | (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || | |
742 | mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && | |
743 | mp_irqs[i].mpc_dstirq == pin) | |
744 | return i; | |
745 | ||
746 | return -1; | |
747 | } | |
748 | ||
749 | /* | |
750 | * Find the pin to which IRQ[irq] (ISA) is connected | |
751 | */ | |
fcfd636a | 752 | static int __init find_isa_irq_pin(int irq, int type) |
1da177e4 LT |
753 | { |
754 | int i; | |
755 | ||
756 | for (i = 0; i < mp_irq_entries; i++) { | |
757 | int lbus = mp_irqs[i].mpc_srcbus; | |
758 | ||
759 | if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || | |
760 | mp_bus_id_to_type[lbus] == MP_BUS_EISA || | |
761 | mp_bus_id_to_type[lbus] == MP_BUS_MCA || | |
762 | mp_bus_id_to_type[lbus] == MP_BUS_NEC98 | |
763 | ) && | |
764 | (mp_irqs[i].mpc_irqtype == type) && | |
765 | (mp_irqs[i].mpc_srcbusirq == irq)) | |
766 | ||
767 | return mp_irqs[i].mpc_dstirq; | |
768 | } | |
769 | return -1; | |
770 | } | |
771 | ||
fcfd636a EB |
772 | static int __init find_isa_irq_apic(int irq, int type) |
773 | { | |
774 | int i; | |
775 | ||
776 | for (i = 0; i < mp_irq_entries; i++) { | |
777 | int lbus = mp_irqs[i].mpc_srcbus; | |
778 | ||
779 | if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || | |
780 | mp_bus_id_to_type[lbus] == MP_BUS_EISA || | |
781 | mp_bus_id_to_type[lbus] == MP_BUS_MCA || | |
782 | mp_bus_id_to_type[lbus] == MP_BUS_NEC98 | |
783 | ) && | |
784 | (mp_irqs[i].mpc_irqtype == type) && | |
785 | (mp_irqs[i].mpc_srcbusirq == irq)) | |
786 | break; | |
787 | } | |
788 | if (i < mp_irq_entries) { | |
789 | int apic; | |
790 | for(apic = 0; apic < nr_ioapics; apic++) { | |
791 | if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) | |
792 | return apic; | |
793 | } | |
794 | } | |
795 | ||
796 | return -1; | |
797 | } | |
798 | ||
1da177e4 LT |
799 | /* |
800 | * Find a specific PCI IRQ entry. | |
801 | * Not an __init, possibly needed by modules | |
802 | */ | |
803 | static int pin_2_irq(int idx, int apic, int pin); | |
804 | ||
805 | int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) | |
806 | { | |
807 | int apic, i, best_guess = -1; | |
808 | ||
809 | apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " | |
810 | "slot:%d, pin:%d.\n", bus, slot, pin); | |
811 | if (mp_bus_id_to_pci_bus[bus] == -1) { | |
812 | printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); | |
813 | return -1; | |
814 | } | |
815 | for (i = 0; i < mp_irq_entries; i++) { | |
816 | int lbus = mp_irqs[i].mpc_srcbus; | |
817 | ||
818 | for (apic = 0; apic < nr_ioapics; apic++) | |
819 | if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || | |
820 | mp_irqs[i].mpc_dstapic == MP_APIC_ALL) | |
821 | break; | |
822 | ||
823 | if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && | |
824 | !mp_irqs[i].mpc_irqtype && | |
825 | (bus == lbus) && | |
826 | (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { | |
827 | int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); | |
828 | ||
829 | if (!(apic || IO_APIC_IRQ(irq))) | |
830 | continue; | |
831 | ||
832 | if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) | |
833 | return irq; | |
834 | /* | |
835 | * Use the first all-but-pin matching entry as a | |
836 | * best-guess fuzzy result for broken mptables. | |
837 | */ | |
838 | if (best_guess < 0) | |
839 | best_guess = irq; | |
840 | } | |
841 | } | |
842 | return best_guess; | |
843 | } | |
129f6946 | 844 | EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); |
1da177e4 LT |
845 | |
846 | /* | |
847 | * This function currently is only a helper for the i386 smp boot process where | |
848 | * we need to reprogram the ioredtbls to cater for the cpus which have come online | |
849 | * so mask in all cases should simply be TARGET_CPUS | |
850 | */ | |
54d5d424 | 851 | #ifdef CONFIG_SMP |
1da177e4 LT |
852 | void __init setup_ioapic_dest(void) |
853 | { | |
854 | int pin, ioapic, irq, irq_entry; | |
855 | ||
856 | if (skip_ioapic_setup == 1) | |
857 | return; | |
858 | ||
859 | for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { | |
860 | for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { | |
861 | irq_entry = find_irq_entry(ioapic, pin, mp_INT); | |
862 | if (irq_entry == -1) | |
863 | continue; | |
864 | irq = pin_2_irq(irq_entry, ioapic, pin); | |
865 | set_ioapic_affinity_irq(irq, TARGET_CPUS); | |
866 | } | |
867 | ||
868 | } | |
869 | } | |
54d5d424 | 870 | #endif |
1da177e4 LT |
871 | |
872 | /* | |
873 | * EISA Edge/Level control register, ELCR | |
874 | */ | |
875 | static int EISA_ELCR(unsigned int irq) | |
876 | { | |
877 | if (irq < 16) { | |
878 | unsigned int port = 0x4d0 + (irq >> 3); | |
879 | return (inb(port) >> (irq & 7)) & 1; | |
880 | } | |
881 | apic_printk(APIC_VERBOSE, KERN_INFO | |
882 | "Broken MPtable reports ISA irq %d\n", irq); | |
883 | return 0; | |
884 | } | |
885 | ||
886 | /* EISA interrupts are always polarity zero and can be edge or level | |
887 | * trigger depending on the ELCR value. If an interrupt is listed as | |
888 | * EISA conforming in the MP table, that means its trigger type must | |
889 | * be read in from the ELCR */ | |
890 | ||
891 | #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) | |
892 | #define default_EISA_polarity(idx) (0) | |
893 | ||
894 | /* ISA interrupts are always polarity zero edge triggered, | |
895 | * when listed as conforming in the MP table. */ | |
896 | ||
897 | #define default_ISA_trigger(idx) (0) | |
898 | #define default_ISA_polarity(idx) (0) | |
899 | ||
900 | /* PCI interrupts are always polarity one level triggered, | |
901 | * when listed as conforming in the MP table. */ | |
902 | ||
903 | #define default_PCI_trigger(idx) (1) | |
904 | #define default_PCI_polarity(idx) (1) | |
905 | ||
906 | /* MCA interrupts are always polarity zero level triggered, | |
907 | * when listed as conforming in the MP table. */ | |
908 | ||
909 | #define default_MCA_trigger(idx) (1) | |
910 | #define default_MCA_polarity(idx) (0) | |
911 | ||
912 | /* NEC98 interrupts are always polarity zero edge triggered, | |
913 | * when listed as conforming in the MP table. */ | |
914 | ||
915 | #define default_NEC98_trigger(idx) (0) | |
916 | #define default_NEC98_polarity(idx) (0) | |
917 | ||
918 | static int __init MPBIOS_polarity(int idx) | |
919 | { | |
920 | int bus = mp_irqs[idx].mpc_srcbus; | |
921 | int polarity; | |
922 | ||
923 | /* | |
924 | * Determine IRQ line polarity (high active or low active): | |
925 | */ | |
926 | switch (mp_irqs[idx].mpc_irqflag & 3) | |
927 | { | |
928 | case 0: /* conforms, ie. bus-type dependent polarity */ | |
929 | { | |
930 | switch (mp_bus_id_to_type[bus]) | |
931 | { | |
932 | case MP_BUS_ISA: /* ISA pin */ | |
933 | { | |
934 | polarity = default_ISA_polarity(idx); | |
935 | break; | |
936 | } | |
937 | case MP_BUS_EISA: /* EISA pin */ | |
938 | { | |
939 | polarity = default_EISA_polarity(idx); | |
940 | break; | |
941 | } | |
942 | case MP_BUS_PCI: /* PCI pin */ | |
943 | { | |
944 | polarity = default_PCI_polarity(idx); | |
945 | break; | |
946 | } | |
947 | case MP_BUS_MCA: /* MCA pin */ | |
948 | { | |
949 | polarity = default_MCA_polarity(idx); | |
950 | break; | |
951 | } | |
952 | case MP_BUS_NEC98: /* NEC 98 pin */ | |
953 | { | |
954 | polarity = default_NEC98_polarity(idx); | |
955 | break; | |
956 | } | |
957 | default: | |
958 | { | |
959 | printk(KERN_WARNING "broken BIOS!!\n"); | |
960 | polarity = 1; | |
961 | break; | |
962 | } | |
963 | } | |
964 | break; | |
965 | } | |
966 | case 1: /* high active */ | |
967 | { | |
968 | polarity = 0; | |
969 | break; | |
970 | } | |
971 | case 2: /* reserved */ | |
972 | { | |
973 | printk(KERN_WARNING "broken BIOS!!\n"); | |
974 | polarity = 1; | |
975 | break; | |
976 | } | |
977 | case 3: /* low active */ | |
978 | { | |
979 | polarity = 1; | |
980 | break; | |
981 | } | |
982 | default: /* invalid */ | |
983 | { | |
984 | printk(KERN_WARNING "broken BIOS!!\n"); | |
985 | polarity = 1; | |
986 | break; | |
987 | } | |
988 | } | |
989 | return polarity; | |
990 | } | |
991 | ||
992 | static int MPBIOS_trigger(int idx) | |
993 | { | |
994 | int bus = mp_irqs[idx].mpc_srcbus; | |
995 | int trigger; | |
996 | ||
997 | /* | |
998 | * Determine IRQ trigger mode (edge or level sensitive): | |
999 | */ | |
1000 | switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) | |
1001 | { | |
1002 | case 0: /* conforms, ie. bus-type dependent */ | |
1003 | { | |
1004 | switch (mp_bus_id_to_type[bus]) | |
1005 | { | |
1006 | case MP_BUS_ISA: /* ISA pin */ | |
1007 | { | |
1008 | trigger = default_ISA_trigger(idx); | |
1009 | break; | |
1010 | } | |
1011 | case MP_BUS_EISA: /* EISA pin */ | |
1012 | { | |
1013 | trigger = default_EISA_trigger(idx); | |
1014 | break; | |
1015 | } | |
1016 | case MP_BUS_PCI: /* PCI pin */ | |
1017 | { | |
1018 | trigger = default_PCI_trigger(idx); | |
1019 | break; | |
1020 | } | |
1021 | case MP_BUS_MCA: /* MCA pin */ | |
1022 | { | |
1023 | trigger = default_MCA_trigger(idx); | |
1024 | break; | |
1025 | } | |
1026 | case MP_BUS_NEC98: /* NEC 98 pin */ | |
1027 | { | |
1028 | trigger = default_NEC98_trigger(idx); | |
1029 | break; | |
1030 | } | |
1031 | default: | |
1032 | { | |
1033 | printk(KERN_WARNING "broken BIOS!!\n"); | |
1034 | trigger = 1; | |
1035 | break; | |
1036 | } | |
1037 | } | |
1038 | break; | |
1039 | } | |
1040 | case 1: /* edge */ | |
1041 | { | |
1042 | trigger = 0; | |
1043 | break; | |
1044 | } | |
1045 | case 2: /* reserved */ | |
1046 | { | |
1047 | printk(KERN_WARNING "broken BIOS!!\n"); | |
1048 | trigger = 1; | |
1049 | break; | |
1050 | } | |
1051 | case 3: /* level */ | |
1052 | { | |
1053 | trigger = 1; | |
1054 | break; | |
1055 | } | |
1056 | default: /* invalid */ | |
1057 | { | |
1058 | printk(KERN_WARNING "broken BIOS!!\n"); | |
1059 | trigger = 0; | |
1060 | break; | |
1061 | } | |
1062 | } | |
1063 | return trigger; | |
1064 | } | |
1065 | ||
1066 | static inline int irq_polarity(int idx) | |
1067 | { | |
1068 | return MPBIOS_polarity(idx); | |
1069 | } | |
1070 | ||
1071 | static inline int irq_trigger(int idx) | |
1072 | { | |
1073 | return MPBIOS_trigger(idx); | |
1074 | } | |
1075 | ||
1076 | static int pin_2_irq(int idx, int apic, int pin) | |
1077 | { | |
1078 | int irq, i; | |
1079 | int bus = mp_irqs[idx].mpc_srcbus; | |
1080 | ||
1081 | /* | |
1082 | * Debugging check, we are in big trouble if this message pops up! | |
1083 | */ | |
1084 | if (mp_irqs[idx].mpc_dstirq != pin) | |
1085 | printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); | |
1086 | ||
1087 | switch (mp_bus_id_to_type[bus]) | |
1088 | { | |
1089 | case MP_BUS_ISA: /* ISA pin */ | |
1090 | case MP_BUS_EISA: | |
1091 | case MP_BUS_MCA: | |
1092 | case MP_BUS_NEC98: | |
1093 | { | |
1094 | irq = mp_irqs[idx].mpc_srcbusirq; | |
1095 | break; | |
1096 | } | |
1097 | case MP_BUS_PCI: /* PCI pin */ | |
1098 | { | |
1099 | /* | |
1100 | * PCI IRQs are mapped in order | |
1101 | */ | |
1102 | i = irq = 0; | |
1103 | while (i < apic) | |
1104 | irq += nr_ioapic_registers[i++]; | |
1105 | irq += pin; | |
1106 | ||
1107 | /* | |
1108 | * For MPS mode, so far only needed by ES7000 platform | |
1109 | */ | |
1110 | if (ioapic_renumber_irq) | |
1111 | irq = ioapic_renumber_irq(apic, irq); | |
1112 | ||
1113 | break; | |
1114 | } | |
1115 | default: | |
1116 | { | |
1117 | printk(KERN_ERR "unknown bus type %d.\n",bus); | |
1118 | irq = 0; | |
1119 | break; | |
1120 | } | |
1121 | } | |
1122 | ||
1123 | /* | |
1124 | * PCI IRQ command line redirection. Yes, limits are hardcoded. | |
1125 | */ | |
1126 | if ((pin >= 16) && (pin <= 23)) { | |
1127 | if (pirq_entries[pin-16] != -1) { | |
1128 | if (!pirq_entries[pin-16]) { | |
1129 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
1130 | "disabling PIRQ%d\n", pin-16); | |
1131 | } else { | |
1132 | irq = pirq_entries[pin-16]; | |
1133 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
1134 | "using PIRQ%d -> IRQ %d\n", | |
1135 | pin-16, irq); | |
1136 | } | |
1137 | } | |
1138 | } | |
1139 | return irq; | |
1140 | } | |
1141 | ||
1142 | static inline int IO_APIC_irq_trigger(int irq) | |
1143 | { | |
1144 | int apic, idx, pin; | |
1145 | ||
1146 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1147 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { | |
1148 | idx = find_irq_entry(apic,pin,mp_INT); | |
1149 | if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) | |
1150 | return irq_trigger(idx); | |
1151 | } | |
1152 | } | |
1153 | /* | |
1154 | * nonexistent IRQs are edge default | |
1155 | */ | |
1156 | return 0; | |
1157 | } | |
1158 | ||
1159 | /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ | |
6c231b7b | 1160 | u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; |
1da177e4 LT |
1161 | |
1162 | int assign_irq_vector(int irq) | |
1163 | { | |
1164 | static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; | |
0a1ad60d | 1165 | int vector; |
1da177e4 | 1166 | |
0a1ad60d JB |
1167 | BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS); |
1168 | ||
1169 | spin_lock(&vector_lock); | |
1170 | ||
1171 | if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) { | |
1172 | spin_unlock(&vector_lock); | |
1da177e4 | 1173 | return IO_APIC_VECTOR(irq); |
0a1ad60d | 1174 | } |
1da177e4 LT |
1175 | next: |
1176 | current_vector += 8; | |
1177 | if (current_vector == SYSCALL_VECTOR) | |
1178 | goto next; | |
1179 | ||
1180 | if (current_vector >= FIRST_SYSTEM_VECTOR) { | |
1181 | offset++; | |
0a1ad60d JB |
1182 | if (!(offset%8)) { |
1183 | spin_unlock(&vector_lock); | |
1da177e4 | 1184 | return -ENOSPC; |
0a1ad60d | 1185 | } |
1da177e4 LT |
1186 | current_vector = FIRST_DEVICE_VECTOR + offset; |
1187 | } | |
1188 | ||
0a1ad60d JB |
1189 | vector = current_vector; |
1190 | vector_irq[vector] = irq; | |
1da177e4 | 1191 | if (irq != AUTO_ASSIGN) |
0a1ad60d JB |
1192 | IO_APIC_VECTOR(irq) = vector; |
1193 | ||
1194 | spin_unlock(&vector_lock); | |
1da177e4 | 1195 | |
0a1ad60d | 1196 | return vector; |
1da177e4 LT |
1197 | } |
1198 | ||
1199 | static struct hw_interrupt_type ioapic_level_type; | |
1200 | static struct hw_interrupt_type ioapic_edge_type; | |
1201 | ||
1202 | #define IOAPIC_AUTO -1 | |
1203 | #define IOAPIC_EDGE 0 | |
1204 | #define IOAPIC_LEVEL 1 | |
1205 | ||
1206 | static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger) | |
1207 | { | |
6ebcc00e JB |
1208 | unsigned idx = use_pci_vector() && !platform_legacy_irq(irq) ? vector : irq; |
1209 | ||
1210 | if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || | |
1211 | trigger == IOAPIC_LEVEL) | |
1212 | irq_desc[idx].handler = &ioapic_level_type; | |
1213 | else | |
1214 | irq_desc[idx].handler = &ioapic_edge_type; | |
1215 | set_intr_gate(vector, interrupt[idx]); | |
1da177e4 LT |
1216 | } |
1217 | ||
1218 | static void __init setup_IO_APIC_irqs(void) | |
1219 | { | |
1220 | struct IO_APIC_route_entry entry; | |
1221 | int apic, pin, idx, irq, first_notcon = 1, vector; | |
1222 | unsigned long flags; | |
1223 | ||
1224 | apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); | |
1225 | ||
1226 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1227 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { | |
1228 | ||
1229 | /* | |
1230 | * add it to the IO-APIC irq-routing table: | |
1231 | */ | |
1232 | memset(&entry,0,sizeof(entry)); | |
1233 | ||
1234 | entry.delivery_mode = INT_DELIVERY_MODE; | |
1235 | entry.dest_mode = INT_DEST_MODE; | |
1236 | entry.mask = 0; /* enable IRQ */ | |
1237 | entry.dest.logical.logical_dest = | |
1238 | cpu_mask_to_apicid(TARGET_CPUS); | |
1239 | ||
1240 | idx = find_irq_entry(apic,pin,mp_INT); | |
1241 | if (idx == -1) { | |
1242 | if (first_notcon) { | |
1243 | apic_printk(APIC_VERBOSE, KERN_DEBUG | |
1244 | " IO-APIC (apicid-pin) %d-%d", | |
1245 | mp_ioapics[apic].mpc_apicid, | |
1246 | pin); | |
1247 | first_notcon = 0; | |
1248 | } else | |
1249 | apic_printk(APIC_VERBOSE, ", %d-%d", | |
1250 | mp_ioapics[apic].mpc_apicid, pin); | |
1251 | continue; | |
1252 | } | |
1253 | ||
1254 | entry.trigger = irq_trigger(idx); | |
1255 | entry.polarity = irq_polarity(idx); | |
1256 | ||
1257 | if (irq_trigger(idx)) { | |
1258 | entry.trigger = 1; | |
1259 | entry.mask = 1; | |
1260 | } | |
1261 | ||
1262 | irq = pin_2_irq(idx, apic, pin); | |
1263 | /* | |
1264 | * skip adding the timer int on secondary nodes, which causes | |
1265 | * a small but painful rift in the time-space continuum | |
1266 | */ | |
1267 | if (multi_timer_check(apic, irq)) | |
1268 | continue; | |
1269 | else | |
1270 | add_pin_to_irq(irq, apic, pin); | |
1271 | ||
1272 | if (!apic && !IO_APIC_IRQ(irq)) | |
1273 | continue; | |
1274 | ||
1275 | if (IO_APIC_IRQ(irq)) { | |
1276 | vector = assign_irq_vector(irq); | |
1277 | entry.vector = vector; | |
1278 | ioapic_register_intr(irq, vector, IOAPIC_AUTO); | |
1279 | ||
1280 | if (!apic && (irq < 16)) | |
1281 | disable_8259A_irq(irq); | |
1282 | } | |
1283 | spin_lock_irqsave(&ioapic_lock, flags); | |
1284 | io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); | |
1285 | io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); | |
54d5d424 | 1286 | set_native_irq_info(irq, TARGET_CPUS); |
1da177e4 LT |
1287 | spin_unlock_irqrestore(&ioapic_lock, flags); |
1288 | } | |
1289 | } | |
1290 | ||
1291 | if (!first_notcon) | |
1292 | apic_printk(APIC_VERBOSE, " not connected.\n"); | |
1293 | } | |
1294 | ||
1295 | /* | |
1296 | * Set up the 8259A-master output pin: | |
1297 | */ | |
fcfd636a | 1298 | static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) |
1da177e4 LT |
1299 | { |
1300 | struct IO_APIC_route_entry entry; | |
1301 | unsigned long flags; | |
1302 | ||
1303 | memset(&entry,0,sizeof(entry)); | |
1304 | ||
1305 | disable_8259A_irq(0); | |
1306 | ||
1307 | /* mask LVT0 */ | |
1308 | apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); | |
1309 | ||
1310 | /* | |
1311 | * We use logical delivery to get the timer IRQ | |
1312 | * to the first CPU. | |
1313 | */ | |
1314 | entry.dest_mode = INT_DEST_MODE; | |
1315 | entry.mask = 0; /* unmask IRQ now */ | |
1316 | entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); | |
1317 | entry.delivery_mode = INT_DELIVERY_MODE; | |
1318 | entry.polarity = 0; | |
1319 | entry.trigger = 0; | |
1320 | entry.vector = vector; | |
1321 | ||
1322 | /* | |
1323 | * The timer IRQ doesn't have to know that behind the | |
1324 | * scene we have a 8259A-master in AEOI mode ... | |
1325 | */ | |
1326 | irq_desc[0].handler = &ioapic_edge_type; | |
1327 | ||
1328 | /* | |
1329 | * Add it to the IO-APIC irq-routing table: | |
1330 | */ | |
1331 | spin_lock_irqsave(&ioapic_lock, flags); | |
fcfd636a EB |
1332 | io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); |
1333 | io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); | |
1da177e4 LT |
1334 | spin_unlock_irqrestore(&ioapic_lock, flags); |
1335 | ||
1336 | enable_8259A_irq(0); | |
1337 | } | |
1338 | ||
1339 | static inline void UNEXPECTED_IO_APIC(void) | |
1340 | { | |
1341 | } | |
1342 | ||
1343 | void __init print_IO_APIC(void) | |
1344 | { | |
1345 | int apic, i; | |
1346 | union IO_APIC_reg_00 reg_00; | |
1347 | union IO_APIC_reg_01 reg_01; | |
1348 | union IO_APIC_reg_02 reg_02; | |
1349 | union IO_APIC_reg_03 reg_03; | |
1350 | unsigned long flags; | |
1351 | ||
1352 | if (apic_verbosity == APIC_QUIET) | |
1353 | return; | |
1354 | ||
1355 | printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); | |
1356 | for (i = 0; i < nr_ioapics; i++) | |
1357 | printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", | |
1358 | mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); | |
1359 | ||
1360 | /* | |
1361 | * We are a bit conservative about what we expect. We have to | |
1362 | * know about every hardware change ASAP. | |
1363 | */ | |
1364 | printk(KERN_INFO "testing the IO APIC.......................\n"); | |
1365 | ||
1366 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1367 | ||
1368 | spin_lock_irqsave(&ioapic_lock, flags); | |
1369 | reg_00.raw = io_apic_read(apic, 0); | |
1370 | reg_01.raw = io_apic_read(apic, 1); | |
1371 | if (reg_01.bits.version >= 0x10) | |
1372 | reg_02.raw = io_apic_read(apic, 2); | |
1373 | if (reg_01.bits.version >= 0x20) | |
1374 | reg_03.raw = io_apic_read(apic, 3); | |
1375 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1376 | ||
1377 | printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); | |
1378 | printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); | |
1379 | printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); | |
1380 | printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); | |
1381 | printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); | |
1382 | if (reg_00.bits.ID >= get_physical_broadcast()) | |
1383 | UNEXPECTED_IO_APIC(); | |
1384 | if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2) | |
1385 | UNEXPECTED_IO_APIC(); | |
1386 | ||
1387 | printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw); | |
1388 | printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); | |
1389 | if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */ | |
1390 | (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */ | |
1391 | (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */ | |
1392 | (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */ | |
1393 | (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */ | |
1394 | (reg_01.bits.entries != 0x2E) && | |
1395 | (reg_01.bits.entries != 0x3F) | |
1396 | ) | |
1397 | UNEXPECTED_IO_APIC(); | |
1398 | ||
1399 | printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); | |
1400 | printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); | |
1401 | if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */ | |
1402 | (reg_01.bits.version != 0x10) && /* oldest IO-APICs */ | |
1403 | (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */ | |
1404 | (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */ | |
1405 | (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */ | |
1406 | ) | |
1407 | UNEXPECTED_IO_APIC(); | |
1408 | if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2) | |
1409 | UNEXPECTED_IO_APIC(); | |
1410 | ||
1411 | /* | |
1412 | * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, | |
1413 | * but the value of reg_02 is read as the previous read register | |
1414 | * value, so ignore it if reg_02 == reg_01. | |
1415 | */ | |
1416 | if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { | |
1417 | printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); | |
1418 | printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); | |
1419 | if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2) | |
1420 | UNEXPECTED_IO_APIC(); | |
1421 | } | |
1422 | ||
1423 | /* | |
1424 | * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 | |
1425 | * or reg_03, but the value of reg_0[23] is read as the previous read | |
1426 | * register value, so ignore it if reg_03 == reg_0[12]. | |
1427 | */ | |
1428 | if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && | |
1429 | reg_03.raw != reg_01.raw) { | |
1430 | printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); | |
1431 | printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); | |
1432 | if (reg_03.bits.__reserved_1) | |
1433 | UNEXPECTED_IO_APIC(); | |
1434 | } | |
1435 | ||
1436 | printk(KERN_DEBUG ".... IRQ redirection table:\n"); | |
1437 | ||
1438 | printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" | |
1439 | " Stat Dest Deli Vect: \n"); | |
1440 | ||
1441 | for (i = 0; i <= reg_01.bits.entries; i++) { | |
1442 | struct IO_APIC_route_entry entry; | |
1443 | ||
1444 | spin_lock_irqsave(&ioapic_lock, flags); | |
1445 | *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2); | |
1446 | *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2); | |
1447 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1448 | ||
1449 | printk(KERN_DEBUG " %02x %03X %02X ", | |
1450 | i, | |
1451 | entry.dest.logical.logical_dest, | |
1452 | entry.dest.physical.physical_dest | |
1453 | ); | |
1454 | ||
1455 | printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", | |
1456 | entry.mask, | |
1457 | entry.trigger, | |
1458 | entry.irr, | |
1459 | entry.polarity, | |
1460 | entry.delivery_status, | |
1461 | entry.dest_mode, | |
1462 | entry.delivery_mode, | |
1463 | entry.vector | |
1464 | ); | |
1465 | } | |
1466 | } | |
1467 | if (use_pci_vector()) | |
1468 | printk(KERN_INFO "Using vector-based indexing\n"); | |
1469 | printk(KERN_DEBUG "IRQ to pin mappings:\n"); | |
1470 | for (i = 0; i < NR_IRQS; i++) { | |
1471 | struct irq_pin_list *entry = irq_2_pin + i; | |
1472 | if (entry->pin < 0) | |
1473 | continue; | |
1474 | if (use_pci_vector() && !platform_legacy_irq(i)) | |
1475 | printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i)); | |
1476 | else | |
1477 | printk(KERN_DEBUG "IRQ%d ", i); | |
1478 | for (;;) { | |
1479 | printk("-> %d:%d", entry->apic, entry->pin); | |
1480 | if (!entry->next) | |
1481 | break; | |
1482 | entry = irq_2_pin + entry->next; | |
1483 | } | |
1484 | printk("\n"); | |
1485 | } | |
1486 | ||
1487 | printk(KERN_INFO ".................................... done.\n"); | |
1488 | ||
1489 | return; | |
1490 | } | |
1491 | ||
1492 | #if 0 | |
1493 | ||
1494 | static void print_APIC_bitfield (int base) | |
1495 | { | |
1496 | unsigned int v; | |
1497 | int i, j; | |
1498 | ||
1499 | if (apic_verbosity == APIC_QUIET) | |
1500 | return; | |
1501 | ||
1502 | printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); | |
1503 | for (i = 0; i < 8; i++) { | |
1504 | v = apic_read(base + i*0x10); | |
1505 | for (j = 0; j < 32; j++) { | |
1506 | if (v & (1<<j)) | |
1507 | printk("1"); | |
1508 | else | |
1509 | printk("0"); | |
1510 | } | |
1511 | printk("\n"); | |
1512 | } | |
1513 | } | |
1514 | ||
1515 | void /*__init*/ print_local_APIC(void * dummy) | |
1516 | { | |
1517 | unsigned int v, ver, maxlvt; | |
1518 | ||
1519 | if (apic_verbosity == APIC_QUIET) | |
1520 | return; | |
1521 | ||
1522 | printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", | |
1523 | smp_processor_id(), hard_smp_processor_id()); | |
1524 | v = apic_read(APIC_ID); | |
1525 | printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); | |
1526 | v = apic_read(APIC_LVR); | |
1527 | printk(KERN_INFO "... APIC VERSION: %08x\n", v); | |
1528 | ver = GET_APIC_VERSION(v); | |
1529 | maxlvt = get_maxlvt(); | |
1530 | ||
1531 | v = apic_read(APIC_TASKPRI); | |
1532 | printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); | |
1533 | ||
1534 | if (APIC_INTEGRATED(ver)) { /* !82489DX */ | |
1535 | v = apic_read(APIC_ARBPRI); | |
1536 | printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, | |
1537 | v & APIC_ARBPRI_MASK); | |
1538 | v = apic_read(APIC_PROCPRI); | |
1539 | printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); | |
1540 | } | |
1541 | ||
1542 | v = apic_read(APIC_EOI); | |
1543 | printk(KERN_DEBUG "... APIC EOI: %08x\n", v); | |
1544 | v = apic_read(APIC_RRR); | |
1545 | printk(KERN_DEBUG "... APIC RRR: %08x\n", v); | |
1546 | v = apic_read(APIC_LDR); | |
1547 | printk(KERN_DEBUG "... APIC LDR: %08x\n", v); | |
1548 | v = apic_read(APIC_DFR); | |
1549 | printk(KERN_DEBUG "... APIC DFR: %08x\n", v); | |
1550 | v = apic_read(APIC_SPIV); | |
1551 | printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); | |
1552 | ||
1553 | printk(KERN_DEBUG "... APIC ISR field:\n"); | |
1554 | print_APIC_bitfield(APIC_ISR); | |
1555 | printk(KERN_DEBUG "... APIC TMR field:\n"); | |
1556 | print_APIC_bitfield(APIC_TMR); | |
1557 | printk(KERN_DEBUG "... APIC IRR field:\n"); | |
1558 | print_APIC_bitfield(APIC_IRR); | |
1559 | ||
1560 | if (APIC_INTEGRATED(ver)) { /* !82489DX */ | |
1561 | if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ | |
1562 | apic_write(APIC_ESR, 0); | |
1563 | v = apic_read(APIC_ESR); | |
1564 | printk(KERN_DEBUG "... APIC ESR: %08x\n", v); | |
1565 | } | |
1566 | ||
1567 | v = apic_read(APIC_ICR); | |
1568 | printk(KERN_DEBUG "... APIC ICR: %08x\n", v); | |
1569 | v = apic_read(APIC_ICR2); | |
1570 | printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); | |
1571 | ||
1572 | v = apic_read(APIC_LVTT); | |
1573 | printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); | |
1574 | ||
1575 | if (maxlvt > 3) { /* PC is LVT#4. */ | |
1576 | v = apic_read(APIC_LVTPC); | |
1577 | printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); | |
1578 | } | |
1579 | v = apic_read(APIC_LVT0); | |
1580 | printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); | |
1581 | v = apic_read(APIC_LVT1); | |
1582 | printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); | |
1583 | ||
1584 | if (maxlvt > 2) { /* ERR is LVT#3. */ | |
1585 | v = apic_read(APIC_LVTERR); | |
1586 | printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); | |
1587 | } | |
1588 | ||
1589 | v = apic_read(APIC_TMICT); | |
1590 | printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); | |
1591 | v = apic_read(APIC_TMCCT); | |
1592 | printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); | |
1593 | v = apic_read(APIC_TDCR); | |
1594 | printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); | |
1595 | printk("\n"); | |
1596 | } | |
1597 | ||
1598 | void print_all_local_APICs (void) | |
1599 | { | |
1600 | on_each_cpu(print_local_APIC, NULL, 1, 1); | |
1601 | } | |
1602 | ||
1603 | void /*__init*/ print_PIC(void) | |
1604 | { | |
1da177e4 LT |
1605 | unsigned int v; |
1606 | unsigned long flags; | |
1607 | ||
1608 | if (apic_verbosity == APIC_QUIET) | |
1609 | return; | |
1610 | ||
1611 | printk(KERN_DEBUG "\nprinting PIC contents\n"); | |
1612 | ||
1613 | spin_lock_irqsave(&i8259A_lock, flags); | |
1614 | ||
1615 | v = inb(0xa1) << 8 | inb(0x21); | |
1616 | printk(KERN_DEBUG "... PIC IMR: %04x\n", v); | |
1617 | ||
1618 | v = inb(0xa0) << 8 | inb(0x20); | |
1619 | printk(KERN_DEBUG "... PIC IRR: %04x\n", v); | |
1620 | ||
1621 | outb(0x0b,0xa0); | |
1622 | outb(0x0b,0x20); | |
1623 | v = inb(0xa0) << 8 | inb(0x20); | |
1624 | outb(0x0a,0xa0); | |
1625 | outb(0x0a,0x20); | |
1626 | ||
1627 | spin_unlock_irqrestore(&i8259A_lock, flags); | |
1628 | ||
1629 | printk(KERN_DEBUG "... PIC ISR: %04x\n", v); | |
1630 | ||
1631 | v = inb(0x4d1) << 8 | inb(0x4d0); | |
1632 | printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); | |
1633 | } | |
1634 | ||
1635 | #endif /* 0 */ | |
1636 | ||
1637 | static void __init enable_IO_APIC(void) | |
1638 | { | |
1639 | union IO_APIC_reg_01 reg_01; | |
fcfd636a EB |
1640 | int i8259_apic, i8259_pin; |
1641 | int i, apic; | |
1da177e4 LT |
1642 | unsigned long flags; |
1643 | ||
1644 | for (i = 0; i < PIN_MAP_SIZE; i++) { | |
1645 | irq_2_pin[i].pin = -1; | |
1646 | irq_2_pin[i].next = 0; | |
1647 | } | |
1648 | if (!pirqs_enabled) | |
1649 | for (i = 0; i < MAX_PIRQS; i++) | |
1650 | pirq_entries[i] = -1; | |
1651 | ||
1652 | /* | |
1653 | * The number of IO-APIC IRQ registers (== #pins): | |
1654 | */ | |
fcfd636a | 1655 | for (apic = 0; apic < nr_ioapics; apic++) { |
1da177e4 | 1656 | spin_lock_irqsave(&ioapic_lock, flags); |
fcfd636a | 1657 | reg_01.raw = io_apic_read(apic, 1); |
1da177e4 | 1658 | spin_unlock_irqrestore(&ioapic_lock, flags); |
fcfd636a EB |
1659 | nr_ioapic_registers[apic] = reg_01.bits.entries+1; |
1660 | } | |
1661 | for(apic = 0; apic < nr_ioapics; apic++) { | |
1662 | int pin; | |
1663 | /* See if any of the pins is in ExtINT mode */ | |
1008fddc | 1664 | for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { |
fcfd636a EB |
1665 | struct IO_APIC_route_entry entry; |
1666 | spin_lock_irqsave(&ioapic_lock, flags); | |
1667 | *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); | |
1668 | *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); | |
1669 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1670 | ||
1671 | ||
1672 | /* If the interrupt line is enabled and in ExtInt mode | |
1673 | * I have found the pin where the i8259 is connected. | |
1674 | */ | |
1675 | if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { | |
1676 | ioapic_i8259.apic = apic; | |
1677 | ioapic_i8259.pin = pin; | |
1678 | goto found_i8259; | |
1679 | } | |
1680 | } | |
1681 | } | |
1682 | found_i8259: | |
1683 | /* Look to see what if the MP table has reported the ExtINT */ | |
1684 | /* If we could not find the appropriate pin by looking at the ioapic | |
1685 | * the i8259 probably is not connected the ioapic but give the | |
1686 | * mptable a chance anyway. | |
1687 | */ | |
1688 | i8259_pin = find_isa_irq_pin(0, mp_ExtINT); | |
1689 | i8259_apic = find_isa_irq_apic(0, mp_ExtINT); | |
1690 | /* Trust the MP table if nothing is setup in the hardware */ | |
1691 | if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { | |
1692 | printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); | |
1693 | ioapic_i8259.pin = i8259_pin; | |
1694 | ioapic_i8259.apic = i8259_apic; | |
1695 | } | |
1696 | /* Complain if the MP table and the hardware disagree */ | |
1697 | if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && | |
1698 | (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) | |
1699 | { | |
1700 | printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); | |
1da177e4 LT |
1701 | } |
1702 | ||
1703 | /* | |
1704 | * Do not trust the IO-APIC being empty at bootup | |
1705 | */ | |
1706 | clear_IO_APIC(); | |
1707 | } | |
1708 | ||
1709 | /* | |
1710 | * Not an __init, needed by the reboot code | |
1711 | */ | |
1712 | void disable_IO_APIC(void) | |
1713 | { | |
1714 | /* | |
1715 | * Clear the IO-APIC before rebooting: | |
1716 | */ | |
1717 | clear_IO_APIC(); | |
1718 | ||
650927ef | 1719 | /* |
0b968d23 | 1720 | * If the i8259 is routed through an IOAPIC |
650927ef | 1721 | * Put that IOAPIC in virtual wire mode |
0b968d23 | 1722 | * so legacy interrupts can be delivered. |
650927ef | 1723 | */ |
fcfd636a | 1724 | if (ioapic_i8259.pin != -1) { |
650927ef EB |
1725 | struct IO_APIC_route_entry entry; |
1726 | unsigned long flags; | |
1727 | ||
1728 | memset(&entry, 0, sizeof(entry)); | |
1729 | entry.mask = 0; /* Enabled */ | |
1730 | entry.trigger = 0; /* Edge */ | |
1731 | entry.irr = 0; | |
1732 | entry.polarity = 0; /* High */ | |
1733 | entry.delivery_status = 0; | |
1734 | entry.dest_mode = 0; /* Physical */ | |
fcfd636a | 1735 | entry.delivery_mode = dest_ExtINT; /* ExtInt */ |
650927ef | 1736 | entry.vector = 0; |
76865c3f VG |
1737 | entry.dest.physical.physical_dest = |
1738 | GET_APIC_ID(apic_read(APIC_ID)); | |
650927ef EB |
1739 | |
1740 | /* | |
1741 | * Add it to the IO-APIC irq-routing table: | |
1742 | */ | |
1743 | spin_lock_irqsave(&ioapic_lock, flags); | |
fcfd636a EB |
1744 | io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin, |
1745 | *(((int *)&entry)+1)); | |
1746 | io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin, | |
1747 | *(((int *)&entry)+0)); | |
650927ef EB |
1748 | spin_unlock_irqrestore(&ioapic_lock, flags); |
1749 | } | |
fcfd636a | 1750 | disconnect_bsp_APIC(ioapic_i8259.pin != -1); |
1da177e4 LT |
1751 | } |
1752 | ||
1753 | /* | |
1754 | * function to set the IO-APIC physical IDs based on the | |
1755 | * values stored in the MPC table. | |
1756 | * | |
1757 | * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 | |
1758 | */ | |
1759 | ||
1760 | #ifndef CONFIG_X86_NUMAQ | |
1761 | static void __init setup_ioapic_ids_from_mpc(void) | |
1762 | { | |
1763 | union IO_APIC_reg_00 reg_00; | |
1764 | physid_mask_t phys_id_present_map; | |
1765 | int apic; | |
1766 | int i; | |
1767 | unsigned char old_id; | |
1768 | unsigned long flags; | |
1769 | ||
ca05fea6 NP |
1770 | /* |
1771 | * Don't check I/O APIC IDs for xAPIC systems. They have | |
1772 | * no meaning without the serial APIC bus. | |
1773 | */ | |
7c5c1e42 SL |
1774 | if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) |
1775 | || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) | |
ca05fea6 | 1776 | return; |
1da177e4 LT |
1777 | /* |
1778 | * This is broken; anything with a real cpu count has to | |
1779 | * circumvent this idiocy regardless. | |
1780 | */ | |
1781 | phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map); | |
1782 | ||
1783 | /* | |
1784 | * Set the IOAPIC ID to the value stored in the MPC table. | |
1785 | */ | |
1786 | for (apic = 0; apic < nr_ioapics; apic++) { | |
1787 | ||
1788 | /* Read the register 0 value */ | |
1789 | spin_lock_irqsave(&ioapic_lock, flags); | |
1790 | reg_00.raw = io_apic_read(apic, 0); | |
1791 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1792 | ||
1793 | old_id = mp_ioapics[apic].mpc_apicid; | |
1794 | ||
1795 | if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { | |
1796 | printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", | |
1797 | apic, mp_ioapics[apic].mpc_apicid); | |
1798 | printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", | |
1799 | reg_00.bits.ID); | |
1800 | mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; | |
1801 | } | |
1802 | ||
1da177e4 LT |
1803 | /* |
1804 | * Sanity check, is the ID really free? Every APIC in a | |
1805 | * system must have a unique ID or we get lots of nice | |
1806 | * 'stuck on smp_invalidate_needed IPI wait' messages. | |
1807 | */ | |
1808 | if (check_apicid_used(phys_id_present_map, | |
1809 | mp_ioapics[apic].mpc_apicid)) { | |
1810 | printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", | |
1811 | apic, mp_ioapics[apic].mpc_apicid); | |
1812 | for (i = 0; i < get_physical_broadcast(); i++) | |
1813 | if (!physid_isset(i, phys_id_present_map)) | |
1814 | break; | |
1815 | if (i >= get_physical_broadcast()) | |
1816 | panic("Max APIC ID exceeded!\n"); | |
1817 | printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", | |
1818 | i); | |
1819 | physid_set(i, phys_id_present_map); | |
1820 | mp_ioapics[apic].mpc_apicid = i; | |
1821 | } else { | |
1822 | physid_mask_t tmp; | |
1823 | tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); | |
1824 | apic_printk(APIC_VERBOSE, "Setting %d in the " | |
1825 | "phys_id_present_map\n", | |
1826 | mp_ioapics[apic].mpc_apicid); | |
1827 | physids_or(phys_id_present_map, phys_id_present_map, tmp); | |
1828 | } | |
1829 | ||
1830 | ||
1831 | /* | |
1832 | * We need to adjust the IRQ routing table | |
1833 | * if the ID changed. | |
1834 | */ | |
1835 | if (old_id != mp_ioapics[apic].mpc_apicid) | |
1836 | for (i = 0; i < mp_irq_entries; i++) | |
1837 | if (mp_irqs[i].mpc_dstapic == old_id) | |
1838 | mp_irqs[i].mpc_dstapic | |
1839 | = mp_ioapics[apic].mpc_apicid; | |
1840 | ||
1841 | /* | |
1842 | * Read the right value from the MPC table and | |
1843 | * write it into the ID register. | |
1844 | */ | |
1845 | apic_printk(APIC_VERBOSE, KERN_INFO | |
1846 | "...changing IO-APIC physical APIC ID to %d ...", | |
1847 | mp_ioapics[apic].mpc_apicid); | |
1848 | ||
1849 | reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; | |
1850 | spin_lock_irqsave(&ioapic_lock, flags); | |
1851 | io_apic_write(apic, 0, reg_00.raw); | |
1852 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1853 | ||
1854 | /* | |
1855 | * Sanity check | |
1856 | */ | |
1857 | spin_lock_irqsave(&ioapic_lock, flags); | |
1858 | reg_00.raw = io_apic_read(apic, 0); | |
1859 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1860 | if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) | |
1861 | printk("could not set ID!\n"); | |
1862 | else | |
1863 | apic_printk(APIC_VERBOSE, " ok.\n"); | |
1864 | } | |
1865 | } | |
1866 | #else | |
1867 | static void __init setup_ioapic_ids_from_mpc(void) { } | |
1868 | #endif | |
1869 | ||
1870 | /* | |
1871 | * There is a nasty bug in some older SMP boards, their mptable lies | |
1872 | * about the timer IRQ. We do the following to work around the situation: | |
1873 | * | |
1874 | * - timer IRQ defaults to IO-APIC IRQ | |
1875 | * - if this function detects that timer IRQs are defunct, then we fall | |
1876 | * back to ISA timer IRQs | |
1877 | */ | |
1878 | static int __init timer_irq_works(void) | |
1879 | { | |
1880 | unsigned long t1 = jiffies; | |
1881 | ||
1882 | local_irq_enable(); | |
1883 | /* Let ten ticks pass... */ | |
1884 | mdelay((10 * 1000) / HZ); | |
1885 | ||
1886 | /* | |
1887 | * Expect a few ticks at least, to be sure some possible | |
1888 | * glue logic does not lock up after one or two first | |
1889 | * ticks in a non-ExtINT mode. Also the local APIC | |
1890 | * might have cached one ExtINT interrupt. Finally, at | |
1891 | * least one tick may be lost due to delays. | |
1892 | */ | |
1893 | if (jiffies - t1 > 4) | |
1894 | return 1; | |
1895 | ||
1896 | return 0; | |
1897 | } | |
1898 | ||
1899 | /* | |
1900 | * In the SMP+IOAPIC case it might happen that there are an unspecified | |
1901 | * number of pending IRQ events unhandled. These cases are very rare, | |
1902 | * so we 'resend' these IRQs via IPIs, to the same CPU. It's much | |
1903 | * better to do it this way as thus we do not have to be aware of | |
1904 | * 'pending' interrupts in the IRQ path, except at this point. | |
1905 | */ | |
1906 | /* | |
1907 | * Edge triggered needs to resend any interrupt | |
1908 | * that was delayed but this is now handled in the device | |
1909 | * independent code. | |
1910 | */ | |
1911 | ||
1912 | /* | |
1913 | * Starting up a edge-triggered IO-APIC interrupt is | |
1914 | * nasty - we need to make sure that we get the edge. | |
1915 | * If it is already asserted for some reason, we need | |
1916 | * return 1 to indicate that is was pending. | |
1917 | * | |
1918 | * This is not complete - we should be able to fake | |
1919 | * an edge even if it isn't on the 8259A... | |
1920 | */ | |
1921 | static unsigned int startup_edge_ioapic_irq(unsigned int irq) | |
1922 | { | |
1923 | int was_pending = 0; | |
1924 | unsigned long flags; | |
1925 | ||
1926 | spin_lock_irqsave(&ioapic_lock, flags); | |
1927 | if (irq < 16) { | |
1928 | disable_8259A_irq(irq); | |
1929 | if (i8259A_irq_pending(irq)) | |
1930 | was_pending = 1; | |
1931 | } | |
1932 | __unmask_IO_APIC_irq(irq); | |
1933 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
1934 | ||
1935 | return was_pending; | |
1936 | } | |
1937 | ||
1938 | /* | |
1939 | * Once we have recorded IRQ_PENDING already, we can mask the | |
1940 | * interrupt for real. This prevents IRQ storms from unhandled | |
1941 | * devices. | |
1942 | */ | |
1943 | static void ack_edge_ioapic_irq(unsigned int irq) | |
1944 | { | |
1945 | move_irq(irq); | |
1946 | if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED)) | |
1947 | == (IRQ_PENDING | IRQ_DISABLED)) | |
1948 | mask_IO_APIC_irq(irq); | |
1949 | ack_APIC_irq(); | |
1950 | } | |
1951 | ||
1952 | /* | |
1953 | * Level triggered interrupts can just be masked, | |
1954 | * and shutting down and starting up the interrupt | |
1955 | * is the same as enabling and disabling them -- except | |
1956 | * with a startup need to return a "was pending" value. | |
1957 | * | |
1958 | * Level triggered interrupts are special because we | |
1959 | * do not touch any IO-APIC register while handling | |
1960 | * them. We ack the APIC in the end-IRQ handler, not | |
1961 | * in the start-IRQ-handler. Protection against reentrance | |
1962 | * from the same interrupt is still provided, both by the | |
1963 | * generic IRQ layer and by the fact that an unacked local | |
1964 | * APIC does not accept IRQs. | |
1965 | */ | |
1966 | static unsigned int startup_level_ioapic_irq (unsigned int irq) | |
1967 | { | |
1968 | unmask_IO_APIC_irq(irq); | |
1969 | ||
1970 | return 0; /* don't check for pending */ | |
1971 | } | |
1972 | ||
1973 | static void end_level_ioapic_irq (unsigned int irq) | |
1974 | { | |
1975 | unsigned long v; | |
1976 | int i; | |
1977 | ||
1978 | move_irq(irq); | |
1979 | /* | |
1980 | * It appears there is an erratum which affects at least version 0x11 | |
1981 | * of I/O APIC (that's the 82093AA and cores integrated into various | |
1982 | * chipsets). Under certain conditions a level-triggered interrupt is | |
1983 | * erroneously delivered as edge-triggered one but the respective IRR | |
1984 | * bit gets set nevertheless. As a result the I/O unit expects an EOI | |
1985 | * message but it will never arrive and further interrupts are blocked | |
1986 | * from the source. The exact reason is so far unknown, but the | |
1987 | * phenomenon was observed when two consecutive interrupt requests | |
1988 | * from a given source get delivered to the same CPU and the source is | |
1989 | * temporarily disabled in between. | |
1990 | * | |
1991 | * A workaround is to simulate an EOI message manually. We achieve it | |
1992 | * by setting the trigger mode to edge and then to level when the edge | |
1993 | * trigger mode gets detected in the TMR of a local APIC for a | |
1994 | * level-triggered interrupt. We mask the source for the time of the | |
1995 | * operation to prevent an edge-triggered interrupt escaping meanwhile. | |
1996 | * The idea is from Manfred Spraul. --macro | |
1997 | */ | |
1998 | i = IO_APIC_VECTOR(irq); | |
1999 | ||
2000 | v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); | |
2001 | ||
2002 | ack_APIC_irq(); | |
2003 | ||
2004 | if (!(v & (1 << (i & 0x1f)))) { | |
2005 | atomic_inc(&irq_mis_count); | |
2006 | spin_lock(&ioapic_lock); | |
2007 | __mask_and_edge_IO_APIC_irq(irq); | |
2008 | __unmask_and_level_IO_APIC_irq(irq); | |
2009 | spin_unlock(&ioapic_lock); | |
2010 | } | |
2011 | } | |
2012 | ||
2013 | #ifdef CONFIG_PCI_MSI | |
2014 | static unsigned int startup_edge_ioapic_vector(unsigned int vector) | |
2015 | { | |
2016 | int irq = vector_to_irq(vector); | |
2017 | ||
2018 | return startup_edge_ioapic_irq(irq); | |
2019 | } | |
2020 | ||
2021 | static void ack_edge_ioapic_vector(unsigned int vector) | |
2022 | { | |
2023 | int irq = vector_to_irq(vector); | |
2024 | ||
fe655d3a | 2025 | move_native_irq(vector); |
1da177e4 LT |
2026 | ack_edge_ioapic_irq(irq); |
2027 | } | |
2028 | ||
2029 | static unsigned int startup_level_ioapic_vector (unsigned int vector) | |
2030 | { | |
2031 | int irq = vector_to_irq(vector); | |
2032 | ||
2033 | return startup_level_ioapic_irq (irq); | |
2034 | } | |
2035 | ||
2036 | static void end_level_ioapic_vector (unsigned int vector) | |
2037 | { | |
2038 | int irq = vector_to_irq(vector); | |
2039 | ||
fe655d3a | 2040 | move_native_irq(vector); |
1da177e4 LT |
2041 | end_level_ioapic_irq(irq); |
2042 | } | |
2043 | ||
2044 | static void mask_IO_APIC_vector (unsigned int vector) | |
2045 | { | |
2046 | int irq = vector_to_irq(vector); | |
2047 | ||
2048 | mask_IO_APIC_irq(irq); | |
2049 | } | |
2050 | ||
2051 | static void unmask_IO_APIC_vector (unsigned int vector) | |
2052 | { | |
2053 | int irq = vector_to_irq(vector); | |
2054 | ||
2055 | unmask_IO_APIC_irq(irq); | |
2056 | } | |
2057 | ||
54d5d424 | 2058 | #ifdef CONFIG_SMP |
1da177e4 LT |
2059 | static void set_ioapic_affinity_vector (unsigned int vector, |
2060 | cpumask_t cpu_mask) | |
2061 | { | |
2062 | int irq = vector_to_irq(vector); | |
2063 | ||
54d5d424 | 2064 | set_native_irq_info(vector, cpu_mask); |
1da177e4 LT |
2065 | set_ioapic_affinity_irq(irq, cpu_mask); |
2066 | } | |
2067 | #endif | |
54d5d424 | 2068 | #endif |
1da177e4 LT |
2069 | |
2070 | /* | |
2071 | * Level and edge triggered IO-APIC interrupts need different handling, | |
2072 | * so we use two separate IRQ descriptors. Edge triggered IRQs can be | |
2073 | * handled with the level-triggered descriptor, but that one has slightly | |
2074 | * more overhead. Level-triggered interrupts cannot be handled with the | |
2075 | * edge-triggered handler, without risking IRQ storms and other ugly | |
2076 | * races. | |
2077 | */ | |
6c231b7b | 2078 | static struct hw_interrupt_type ioapic_edge_type __read_mostly = { |
1da177e4 LT |
2079 | .typename = "IO-APIC-edge", |
2080 | .startup = startup_edge_ioapic, | |
2081 | .shutdown = shutdown_edge_ioapic, | |
2082 | .enable = enable_edge_ioapic, | |
2083 | .disable = disable_edge_ioapic, | |
2084 | .ack = ack_edge_ioapic, | |
2085 | .end = end_edge_ioapic, | |
54d5d424 | 2086 | #ifdef CONFIG_SMP |
1da177e4 | 2087 | .set_affinity = set_ioapic_affinity, |
54d5d424 | 2088 | #endif |
1da177e4 LT |
2089 | }; |
2090 | ||
6c231b7b | 2091 | static struct hw_interrupt_type ioapic_level_type __read_mostly = { |
1da177e4 LT |
2092 | .typename = "IO-APIC-level", |
2093 | .startup = startup_level_ioapic, | |
2094 | .shutdown = shutdown_level_ioapic, | |
2095 | .enable = enable_level_ioapic, | |
2096 | .disable = disable_level_ioapic, | |
2097 | .ack = mask_and_ack_level_ioapic, | |
2098 | .end = end_level_ioapic, | |
54d5d424 | 2099 | #ifdef CONFIG_SMP |
1da177e4 | 2100 | .set_affinity = set_ioapic_affinity, |
54d5d424 | 2101 | #endif |
1da177e4 LT |
2102 | }; |
2103 | ||
2104 | static inline void init_IO_APIC_traps(void) | |
2105 | { | |
2106 | int irq; | |
2107 | ||
2108 | /* | |
2109 | * NOTE! The local APIC isn't very good at handling | |
2110 | * multiple interrupts at the same interrupt level. | |
2111 | * As the interrupt level is determined by taking the | |
2112 | * vector number and shifting that right by 4, we | |
2113 | * want to spread these out a bit so that they don't | |
2114 | * all fall in the same interrupt level. | |
2115 | * | |
2116 | * Also, we've got to be careful not to trash gate | |
2117 | * 0x80, because int 0x80 is hm, kind of importantish. ;) | |
2118 | */ | |
2119 | for (irq = 0; irq < NR_IRQS ; irq++) { | |
2120 | int tmp = irq; | |
2121 | if (use_pci_vector()) { | |
2122 | if (!platform_legacy_irq(tmp)) | |
2123 | if ((tmp = vector_to_irq(tmp)) == -1) | |
2124 | continue; | |
2125 | } | |
2126 | if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) { | |
2127 | /* | |
2128 | * Hmm.. We don't have an entry for this, | |
2129 | * so default to an old-fashioned 8259 | |
2130 | * interrupt if we can.. | |
2131 | */ | |
2132 | if (irq < 16) | |
2133 | make_8259A_irq(irq); | |
2134 | else | |
2135 | /* Strange. Oh, well.. */ | |
2136 | irq_desc[irq].handler = &no_irq_type; | |
2137 | } | |
2138 | } | |
2139 | } | |
2140 | ||
2141 | static void enable_lapic_irq (unsigned int irq) | |
2142 | { | |
2143 | unsigned long v; | |
2144 | ||
2145 | v = apic_read(APIC_LVT0); | |
2146 | apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED); | |
2147 | } | |
2148 | ||
2149 | static void disable_lapic_irq (unsigned int irq) | |
2150 | { | |
2151 | unsigned long v; | |
2152 | ||
2153 | v = apic_read(APIC_LVT0); | |
2154 | apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); | |
2155 | } | |
2156 | ||
2157 | static void ack_lapic_irq (unsigned int irq) | |
2158 | { | |
2159 | ack_APIC_irq(); | |
2160 | } | |
2161 | ||
2162 | static void end_lapic_irq (unsigned int i) { /* nothing */ } | |
2163 | ||
6c231b7b | 2164 | static struct hw_interrupt_type lapic_irq_type __read_mostly = { |
1da177e4 LT |
2165 | .typename = "local-APIC-edge", |
2166 | .startup = NULL, /* startup_irq() not used for IRQ0 */ | |
2167 | .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ | |
2168 | .enable = enable_lapic_irq, | |
2169 | .disable = disable_lapic_irq, | |
2170 | .ack = ack_lapic_irq, | |
2171 | .end = end_lapic_irq | |
2172 | }; | |
2173 | ||
2174 | static void setup_nmi (void) | |
2175 | { | |
2176 | /* | |
2177 | * Dirty trick to enable the NMI watchdog ... | |
2178 | * We put the 8259A master into AEOI mode and | |
2179 | * unmask on all local APICs LVT0 as NMI. | |
2180 | * | |
2181 | * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') | |
2182 | * is from Maciej W. Rozycki - so we do not have to EOI from | |
2183 | * the NMI handler or the timer interrupt. | |
2184 | */ | |
2185 | apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); | |
2186 | ||
2187 | on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1); | |
2188 | ||
2189 | apic_printk(APIC_VERBOSE, " done.\n"); | |
2190 | } | |
2191 | ||
2192 | /* | |
2193 | * This looks a bit hackish but it's about the only one way of sending | |
2194 | * a few INTA cycles to 8259As and any associated glue logic. ICR does | |
2195 | * not support the ExtINT mode, unfortunately. We need to send these | |
2196 | * cycles as some i82489DX-based boards have glue logic that keeps the | |
2197 | * 8259A interrupt line asserted until INTA. --macro | |
2198 | */ | |
2199 | static inline void unlock_ExtINT_logic(void) | |
2200 | { | |
fcfd636a | 2201 | int apic, pin, i; |
1da177e4 LT |
2202 | struct IO_APIC_route_entry entry0, entry1; |
2203 | unsigned char save_control, save_freq_select; | |
2204 | unsigned long flags; | |
2205 | ||
fcfd636a EB |
2206 | pin = find_isa_irq_pin(8, mp_INT); |
2207 | apic = find_isa_irq_apic(8, mp_INT); | |
1da177e4 LT |
2208 | if (pin == -1) |
2209 | return; | |
2210 | ||
2211 | spin_lock_irqsave(&ioapic_lock, flags); | |
fcfd636a EB |
2212 | *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); |
2213 | *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); | |
1da177e4 | 2214 | spin_unlock_irqrestore(&ioapic_lock, flags); |
fcfd636a | 2215 | clear_IO_APIC_pin(apic, pin); |
1da177e4 LT |
2216 | |
2217 | memset(&entry1, 0, sizeof(entry1)); | |
2218 | ||
2219 | entry1.dest_mode = 0; /* physical delivery */ | |
2220 | entry1.mask = 0; /* unmask IRQ now */ | |
2221 | entry1.dest.physical.physical_dest = hard_smp_processor_id(); | |
2222 | entry1.delivery_mode = dest_ExtINT; | |
2223 | entry1.polarity = entry0.polarity; | |
2224 | entry1.trigger = 0; | |
2225 | entry1.vector = 0; | |
2226 | ||
2227 | spin_lock_irqsave(&ioapic_lock, flags); | |
fcfd636a EB |
2228 | io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); |
2229 | io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); | |
1da177e4 LT |
2230 | spin_unlock_irqrestore(&ioapic_lock, flags); |
2231 | ||
2232 | save_control = CMOS_READ(RTC_CONTROL); | |
2233 | save_freq_select = CMOS_READ(RTC_FREQ_SELECT); | |
2234 | CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, | |
2235 | RTC_FREQ_SELECT); | |
2236 | CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); | |
2237 | ||
2238 | i = 100; | |
2239 | while (i-- > 0) { | |
2240 | mdelay(10); | |
2241 | if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) | |
2242 | i -= 10; | |
2243 | } | |
2244 | ||
2245 | CMOS_WRITE(save_control, RTC_CONTROL); | |
2246 | CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); | |
fcfd636a | 2247 | clear_IO_APIC_pin(apic, pin); |
1da177e4 LT |
2248 | |
2249 | spin_lock_irqsave(&ioapic_lock, flags); | |
fcfd636a EB |
2250 | io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); |
2251 | io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); | |
1da177e4 LT |
2252 | spin_unlock_irqrestore(&ioapic_lock, flags); |
2253 | } | |
2254 | ||
e0c1e9bf KM |
2255 | int timer_uses_ioapic_pin_0; |
2256 | ||
1da177e4 LT |
2257 | /* |
2258 | * This code may look a bit paranoid, but it's supposed to cooperate with | |
2259 | * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ | |
2260 | * is so screwy. Thanks to Brian Perkins for testing/hacking this beast | |
2261 | * fanatically on his truly buggy board. | |
2262 | */ | |
2263 | static inline void check_timer(void) | |
2264 | { | |
fcfd636a | 2265 | int apic1, pin1, apic2, pin2; |
1da177e4 LT |
2266 | int vector; |
2267 | ||
2268 | /* | |
2269 | * get/set the timer IRQ vector: | |
2270 | */ | |
2271 | disable_8259A_irq(0); | |
2272 | vector = assign_irq_vector(0); | |
2273 | set_intr_gate(vector, interrupt[0]); | |
2274 | ||
2275 | /* | |
2276 | * Subtle, code in do_timer_interrupt() expects an AEOI | |
2277 | * mode for the 8259A whenever interrupts are routed | |
2278 | * through I/O APICs. Also IRQ0 has to be enabled in | |
2279 | * the 8259A which implies the virtual wire has to be | |
2280 | * disabled in the local APIC. | |
2281 | */ | |
2282 | apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); | |
2283 | init_8259A(1); | |
2284 | timer_ack = 1; | |
f9262c12 AK |
2285 | if (timer_over_8254 > 0) |
2286 | enable_8259A_irq(0); | |
1da177e4 | 2287 | |
fcfd636a EB |
2288 | pin1 = find_isa_irq_pin(0, mp_INT); |
2289 | apic1 = find_isa_irq_apic(0, mp_INT); | |
2290 | pin2 = ioapic_i8259.pin; | |
2291 | apic2 = ioapic_i8259.apic; | |
1da177e4 | 2292 | |
e0c1e9bf KM |
2293 | if (pin1 == 0) |
2294 | timer_uses_ioapic_pin_0 = 1; | |
2295 | ||
fcfd636a EB |
2296 | printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", |
2297 | vector, apic1, pin1, apic2, pin2); | |
1da177e4 LT |
2298 | |
2299 | if (pin1 != -1) { | |
2300 | /* | |
2301 | * Ok, does IRQ0 through the IOAPIC work? | |
2302 | */ | |
2303 | unmask_IO_APIC_irq(0); | |
2304 | if (timer_irq_works()) { | |
2305 | if (nmi_watchdog == NMI_IO_APIC) { | |
2306 | disable_8259A_irq(0); | |
2307 | setup_nmi(); | |
2308 | enable_8259A_irq(0); | |
1da177e4 | 2309 | } |
66759a01 CE |
2310 | if (disable_timer_pin_1 > 0) |
2311 | clear_IO_APIC_pin(0, pin1); | |
1da177e4 LT |
2312 | return; |
2313 | } | |
fcfd636a EB |
2314 | clear_IO_APIC_pin(apic1, pin1); |
2315 | printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " | |
2316 | "IO-APIC\n"); | |
1da177e4 LT |
2317 | } |
2318 | ||
2319 | printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); | |
2320 | if (pin2 != -1) { | |
2321 | printk("\n..... (found pin %d) ...", pin2); | |
2322 | /* | |
2323 | * legacy devices should be connected to IO APIC #0 | |
2324 | */ | |
fcfd636a | 2325 | setup_ExtINT_IRQ0_pin(apic2, pin2, vector); |
1da177e4 LT |
2326 | if (timer_irq_works()) { |
2327 | printk("works.\n"); | |
2328 | if (pin1 != -1) | |
fcfd636a | 2329 | replace_pin_at_irq(0, apic1, pin1, apic2, pin2); |
1da177e4 | 2330 | else |
fcfd636a | 2331 | add_pin_to_irq(0, apic2, pin2); |
1da177e4 LT |
2332 | if (nmi_watchdog == NMI_IO_APIC) { |
2333 | setup_nmi(); | |
1da177e4 LT |
2334 | } |
2335 | return; | |
2336 | } | |
2337 | /* | |
2338 | * Cleanup, just in case ... | |
2339 | */ | |
fcfd636a | 2340 | clear_IO_APIC_pin(apic2, pin2); |
1da177e4 LT |
2341 | } |
2342 | printk(" failed.\n"); | |
2343 | ||
2344 | if (nmi_watchdog == NMI_IO_APIC) { | |
2345 | printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); | |
2346 | nmi_watchdog = 0; | |
2347 | } | |
2348 | ||
2349 | printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); | |
2350 | ||
2351 | disable_8259A_irq(0); | |
2352 | irq_desc[0].handler = &lapic_irq_type; | |
2353 | apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ | |
2354 | enable_8259A_irq(0); | |
2355 | ||
2356 | if (timer_irq_works()) { | |
2357 | printk(" works.\n"); | |
2358 | return; | |
2359 | } | |
2360 | apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); | |
2361 | printk(" failed.\n"); | |
2362 | ||
2363 | printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); | |
2364 | ||
2365 | timer_ack = 0; | |
2366 | init_8259A(0); | |
2367 | make_8259A_irq(0); | |
2368 | apic_write_around(APIC_LVT0, APIC_DM_EXTINT); | |
2369 | ||
2370 | unlock_ExtINT_logic(); | |
2371 | ||
2372 | if (timer_irq_works()) { | |
2373 | printk(" works.\n"); | |
2374 | return; | |
2375 | } | |
2376 | printk(" failed :(.\n"); | |
2377 | panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " | |
2378 | "report. Then try booting with the 'noapic' option"); | |
2379 | } | |
2380 | ||
2381 | /* | |
2382 | * | |
2383 | * IRQ's that are handled by the PIC in the MPS IOAPIC case. | |
2384 | * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. | |
2385 | * Linux doesn't really care, as it's not actually used | |
2386 | * for any interrupt handling anyway. | |
2387 | */ | |
2388 | #define PIC_IRQS (1 << PIC_CASCADE_IR) | |
2389 | ||
2390 | void __init setup_IO_APIC(void) | |
2391 | { | |
2392 | enable_IO_APIC(); | |
2393 | ||
2394 | if (acpi_ioapic) | |
2395 | io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ | |
2396 | else | |
2397 | io_apic_irqs = ~PIC_IRQS; | |
2398 | ||
2399 | printk("ENABLING IO-APIC IRQs\n"); | |
2400 | ||
2401 | /* | |
2402 | * Set up IO-APIC IRQ routing. | |
2403 | */ | |
2404 | if (!acpi_ioapic) | |
2405 | setup_ioapic_ids_from_mpc(); | |
2406 | sync_Arb_IDs(); | |
2407 | setup_IO_APIC_irqs(); | |
2408 | init_IO_APIC_traps(); | |
1e4c85f9 | 2409 | check_timer(); |
1da177e4 LT |
2410 | if (!acpi_ioapic) |
2411 | print_IO_APIC(); | |
2412 | } | |
2413 | ||
f9262c12 AK |
2414 | static int __init setup_disable_8254_timer(char *s) |
2415 | { | |
2416 | timer_over_8254 = -1; | |
2417 | return 1; | |
2418 | } | |
2419 | static int __init setup_enable_8254_timer(char *s) | |
2420 | { | |
2421 | timer_over_8254 = 2; | |
2422 | return 1; | |
2423 | } | |
2424 | ||
2425 | __setup("disable_8254_timer", setup_disable_8254_timer); | |
2426 | __setup("enable_8254_timer", setup_enable_8254_timer); | |
2427 | ||
1da177e4 LT |
2428 | /* |
2429 | * Called after all the initialization is done. If we didnt find any | |
2430 | * APIC bugs then we can allow the modify fast path | |
2431 | */ | |
2432 | ||
2433 | static int __init io_apic_bug_finalize(void) | |
2434 | { | |
2435 | if(sis_apic_bug == -1) | |
2436 | sis_apic_bug = 0; | |
2437 | return 0; | |
2438 | } | |
2439 | ||
2440 | late_initcall(io_apic_bug_finalize); | |
2441 | ||
2442 | struct sysfs_ioapic_data { | |
2443 | struct sys_device dev; | |
2444 | struct IO_APIC_route_entry entry[0]; | |
2445 | }; | |
2446 | static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; | |
2447 | ||
438510f6 | 2448 | static int ioapic_suspend(struct sys_device *dev, pm_message_t state) |
1da177e4 LT |
2449 | { |
2450 | struct IO_APIC_route_entry *entry; | |
2451 | struct sysfs_ioapic_data *data; | |
2452 | unsigned long flags; | |
2453 | int i; | |
2454 | ||
2455 | data = container_of(dev, struct sysfs_ioapic_data, dev); | |
2456 | entry = data->entry; | |
2457 | spin_lock_irqsave(&ioapic_lock, flags); | |
2458 | for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { | |
2459 | *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i); | |
2460 | *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i); | |
2461 | } | |
2462 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2463 | ||
2464 | return 0; | |
2465 | } | |
2466 | ||
2467 | static int ioapic_resume(struct sys_device *dev) | |
2468 | { | |
2469 | struct IO_APIC_route_entry *entry; | |
2470 | struct sysfs_ioapic_data *data; | |
2471 | unsigned long flags; | |
2472 | union IO_APIC_reg_00 reg_00; | |
2473 | int i; | |
2474 | ||
2475 | data = container_of(dev, struct sysfs_ioapic_data, dev); | |
2476 | entry = data->entry; | |
2477 | ||
2478 | spin_lock_irqsave(&ioapic_lock, flags); | |
2479 | reg_00.raw = io_apic_read(dev->id, 0); | |
2480 | if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { | |
2481 | reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; | |
2482 | io_apic_write(dev->id, 0, reg_00.raw); | |
2483 | } | |
2484 | for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { | |
2485 | io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1)); | |
2486 | io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0)); | |
2487 | } | |
2488 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2489 | ||
2490 | return 0; | |
2491 | } | |
2492 | ||
2493 | static struct sysdev_class ioapic_sysdev_class = { | |
2494 | set_kset_name("ioapic"), | |
2495 | .suspend = ioapic_suspend, | |
2496 | .resume = ioapic_resume, | |
2497 | }; | |
2498 | ||
2499 | static int __init ioapic_init_sysfs(void) | |
2500 | { | |
2501 | struct sys_device * dev; | |
2502 | int i, size, error = 0; | |
2503 | ||
2504 | error = sysdev_class_register(&ioapic_sysdev_class); | |
2505 | if (error) | |
2506 | return error; | |
2507 | ||
2508 | for (i = 0; i < nr_ioapics; i++ ) { | |
2509 | size = sizeof(struct sys_device) + nr_ioapic_registers[i] | |
2510 | * sizeof(struct IO_APIC_route_entry); | |
2511 | mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); | |
2512 | if (!mp_ioapic_data[i]) { | |
2513 | printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); | |
2514 | continue; | |
2515 | } | |
2516 | memset(mp_ioapic_data[i], 0, size); | |
2517 | dev = &mp_ioapic_data[i]->dev; | |
2518 | dev->id = i; | |
2519 | dev->cls = &ioapic_sysdev_class; | |
2520 | error = sysdev_register(dev); | |
2521 | if (error) { | |
2522 | kfree(mp_ioapic_data[i]); | |
2523 | mp_ioapic_data[i] = NULL; | |
2524 | printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); | |
2525 | continue; | |
2526 | } | |
2527 | } | |
2528 | ||
2529 | return 0; | |
2530 | } | |
2531 | ||
2532 | device_initcall(ioapic_init_sysfs); | |
2533 | ||
2534 | /* -------------------------------------------------------------------------- | |
2535 | ACPI-based IOAPIC Configuration | |
2536 | -------------------------------------------------------------------------- */ | |
2537 | ||
888ba6c6 | 2538 | #ifdef CONFIG_ACPI |
1da177e4 LT |
2539 | |
2540 | int __init io_apic_get_unique_id (int ioapic, int apic_id) | |
2541 | { | |
2542 | union IO_APIC_reg_00 reg_00; | |
2543 | static physid_mask_t apic_id_map = PHYSID_MASK_NONE; | |
2544 | physid_mask_t tmp; | |
2545 | unsigned long flags; | |
2546 | int i = 0; | |
2547 | ||
2548 | /* | |
2549 | * The P4 platform supports up to 256 APIC IDs on two separate APIC | |
2550 | * buses (one for LAPICs, one for IOAPICs), where predecessors only | |
2551 | * supports up to 16 on one shared APIC bus. | |
2552 | * | |
2553 | * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full | |
2554 | * advantage of new APIC bus architecture. | |
2555 | */ | |
2556 | ||
2557 | if (physids_empty(apic_id_map)) | |
2558 | apic_id_map = ioapic_phys_id_map(phys_cpu_present_map); | |
2559 | ||
2560 | spin_lock_irqsave(&ioapic_lock, flags); | |
2561 | reg_00.raw = io_apic_read(ioapic, 0); | |
2562 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2563 | ||
2564 | if (apic_id >= get_physical_broadcast()) { | |
2565 | printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " | |
2566 | "%d\n", ioapic, apic_id, reg_00.bits.ID); | |
2567 | apic_id = reg_00.bits.ID; | |
2568 | } | |
2569 | ||
2570 | /* | |
2571 | * Every APIC in a system must have a unique ID or we get lots of nice | |
2572 | * 'stuck on smp_invalidate_needed IPI wait' messages. | |
2573 | */ | |
2574 | if (check_apicid_used(apic_id_map, apic_id)) { | |
2575 | ||
2576 | for (i = 0; i < get_physical_broadcast(); i++) { | |
2577 | if (!check_apicid_used(apic_id_map, i)) | |
2578 | break; | |
2579 | } | |
2580 | ||
2581 | if (i == get_physical_broadcast()) | |
2582 | panic("Max apic_id exceeded!\n"); | |
2583 | ||
2584 | printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " | |
2585 | "trying %d\n", ioapic, apic_id, i); | |
2586 | ||
2587 | apic_id = i; | |
2588 | } | |
2589 | ||
2590 | tmp = apicid_to_cpu_present(apic_id); | |
2591 | physids_or(apic_id_map, apic_id_map, tmp); | |
2592 | ||
2593 | if (reg_00.bits.ID != apic_id) { | |
2594 | reg_00.bits.ID = apic_id; | |
2595 | ||
2596 | spin_lock_irqsave(&ioapic_lock, flags); | |
2597 | io_apic_write(ioapic, 0, reg_00.raw); | |
2598 | reg_00.raw = io_apic_read(ioapic, 0); | |
2599 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2600 | ||
2601 | /* Sanity check */ | |
6070f9ec AD |
2602 | if (reg_00.bits.ID != apic_id) { |
2603 | printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); | |
2604 | return -1; | |
2605 | } | |
1da177e4 LT |
2606 | } |
2607 | ||
2608 | apic_printk(APIC_VERBOSE, KERN_INFO | |
2609 | "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); | |
2610 | ||
2611 | return apic_id; | |
2612 | } | |
2613 | ||
2614 | ||
2615 | int __init io_apic_get_version (int ioapic) | |
2616 | { | |
2617 | union IO_APIC_reg_01 reg_01; | |
2618 | unsigned long flags; | |
2619 | ||
2620 | spin_lock_irqsave(&ioapic_lock, flags); | |
2621 | reg_01.raw = io_apic_read(ioapic, 1); | |
2622 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2623 | ||
2624 | return reg_01.bits.version; | |
2625 | } | |
2626 | ||
2627 | ||
2628 | int __init io_apic_get_redir_entries (int ioapic) | |
2629 | { | |
2630 | union IO_APIC_reg_01 reg_01; | |
2631 | unsigned long flags; | |
2632 | ||
2633 | spin_lock_irqsave(&ioapic_lock, flags); | |
2634 | reg_01.raw = io_apic_read(ioapic, 1); | |
2635 | spin_unlock_irqrestore(&ioapic_lock, flags); | |
2636 | ||
2637 | return reg_01.bits.entries; | |
2638 | } | |
2639 | ||
2640 | ||
2641 | int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) | |
2642 | { | |
2643 | struct IO_APIC_route_entry entry; | |
2644 | unsigned long flags; | |
2645 | ||
2646 | if (!IO_APIC_IRQ(irq)) { | |
2647 | printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", | |
2648 | ioapic); | |
2649 | return -EINVAL; | |
2650 | } | |
2651 | ||
2652 | /* | |
2653 | * Generate a PCI IRQ routing entry and program the IOAPIC accordingly. | |
2654 | * Note that we mask (disable) IRQs now -- these get enabled when the | |
2655 | * corresponding device driver registers for this IRQ. | |
2656 | */ | |
2657 | ||
2658 | memset(&entry,0,sizeof(entry)); | |
2659 | ||
2660 | entry.delivery_mode = INT_DELIVERY_MODE; | |
2661 | entry.dest_mode = INT_DEST_MODE; | |
2662 | entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); | |
2663 | entry.trigger = edge_level; | |
2664 | entry.polarity = active_high_low; | |
2665 | entry.mask = 1; | |
2666 | ||
2667 | /* | |
2668 | * IRQs < 16 are already in the irq_2_pin[] map | |
2669 | */ | |
2670 | if (irq >= 16) | |
2671 | add_pin_to_irq(irq, ioapic, pin); | |
2672 | ||
2673 | entry.vector = assign_irq_vector(irq); | |
2674 | ||
2675 | apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " | |
2676 | "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, | |
2677 | mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, | |
2678 | edge_level, active_high_low); | |
2679 | ||
2680 | ioapic_register_intr(irq, entry.vector, edge_level); | |
2681 | ||
2682 | if (!ioapic && (irq < 16)) | |
2683 | disable_8259A_irq(irq); | |
2684 | ||
2685 | spin_lock_irqsave(&ioapic_lock, flags); | |
2686 | io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); | |
2687 | io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); | |
54d5d424 | 2688 | set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); |
1da177e4 LT |
2689 | spin_unlock_irqrestore(&ioapic_lock, flags); |
2690 | ||
2691 | return 0; | |
2692 | } | |
2693 | ||
888ba6c6 | 2694 | #endif /* CONFIG_ACPI */ |