]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blame - arch/ia64/kernel/smpboot.c
CRED: Use RCU to access another task's creds and to release a task's own creds
[mirror_ubuntu-zesty-kernel.git] / arch / ia64 / kernel / smpboot.c
CommitLineData
1da177e4
LT
1/*
2 * SMP boot-related support
3 *
82975115 4 * Copyright (C) 1998-2003, 2005 Hewlett-Packard Co
1da177e4 5 * David Mosberger-Tang <davidm@hpl.hp.com>
e927ecb0
SS
6 * Copyright (C) 2001, 2004-2005 Intel Corp
7 * Rohit Seth <rohit.seth@intel.com>
8 * Suresh Siddha <suresh.b.siddha@intel.com>
9 * Gordon Jin <gordon.jin@intel.com>
10 * Ashok Raj <ashok.raj@intel.com>
1da177e4
LT
11 *
12 * 01/05/16 Rohit Seth <rohit.seth@intel.com> Moved SMP booting functions from smp.c to here.
13 * 01/04/27 David Mosberger <davidm@hpl.hp.com> Added ITC synching code.
14 * 02/07/31 David Mosberger <davidm@hpl.hp.com> Switch over to hotplug-CPU boot-sequence.
15 * smp_boot_cpus()/smp_commence() is replaced by
16 * smp_prepare_cpus()/__cpu_up()/smp_cpus_done().
b8d8b883 17 * 04/06/21 Ashok Raj <ashok.raj@intel.com> Added CPU Hotplug Support
e927ecb0
SS
18 * 04/12/26 Jin Gordon <gordon.jin@intel.com>
19 * 04/12/26 Rohit Seth <rohit.seth@intel.com>
20 * Add multi-threading and multi-core detection
21 * 05/01/30 Suresh Siddha <suresh.b.siddha@intel.com>
22 * Setup cpu_sibling_map and cpu_core_map
1da177e4 23 */
1da177e4
LT
24
25#include <linux/module.h>
26#include <linux/acpi.h>
27#include <linux/bootmem.h>
28#include <linux/cpu.h>
29#include <linux/delay.h>
30#include <linux/init.h>
31#include <linux/interrupt.h>
32#include <linux/irq.h>
33#include <linux/kernel.h>
34#include <linux/kernel_stat.h>
35#include <linux/mm.h>
36#include <linux/notifier.h>
37#include <linux/smp.h>
1da177e4
LT
38#include <linux/spinlock.h>
39#include <linux/efi.h>
40#include <linux/percpu.h>
41#include <linux/bitops.h>
42
43#include <asm/atomic.h>
44#include <asm/cache.h>
45#include <asm/current.h>
46#include <asm/delay.h>
47#include <asm/ia32.h>
48#include <asm/io.h>
49#include <asm/irq.h>
50#include <asm/machvec.h>
51#include <asm/mca.h>
52#include <asm/page.h>
e51835d5 53#include <asm/paravirt.h>
1da177e4
LT
54#include <asm/pgalloc.h>
55#include <asm/pgtable.h>
56#include <asm/processor.h>
57#include <asm/ptrace.h>
58#include <asm/sal.h>
59#include <asm/system.h>
60#include <asm/tlbflush.h>
61#include <asm/unistd.h>
6e9de181 62#include <asm/sn/arch.h>
1da177e4
LT
63
64#define SMP_DEBUG 0
65
66#if SMP_DEBUG
67#define Dprintk(x...) printk(x)
68#else
69#define Dprintk(x...)
70#endif
71
b8d8b883 72#ifdef CONFIG_HOTPLUG_CPU
ff741906
AR
73#ifdef CONFIG_PERMIT_BSP_REMOVE
74#define bsp_remove_ok 1
75#else
76#define bsp_remove_ok 0
77#endif
78
b8d8b883
AR
79/*
80 * Store all idle threads, this can be reused instead of creating
81 * a new thread. Also avoids complicated thread destroy functionality
82 * for idle threads.
83 */
84struct task_struct *idle_thread_array[NR_CPUS];
85
86/*
87 * Global array allocated for NR_CPUS at boot time
88 */
89struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS];
90
91/*
92 * start_ap in head.S uses this to store current booting cpu
93 * info.
94 */
95struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0];
96
97#define set_brendez_area(x) (sal_state_for_booting_cpu = &sal_boot_rendez_state[(x)]);
98
99#define get_idle_for_cpu(x) (idle_thread_array[(x)])
100#define set_idle_for_cpu(x,p) (idle_thread_array[(x)] = (p))
101
102#else
103
104#define get_idle_for_cpu(x) (NULL)
105#define set_idle_for_cpu(x,p)
106#define set_brendez_area(x)
107#endif
108
1da177e4
LT
109
110/*
111 * ITC synchronization related stuff:
112 */
ff741906 113#define MASTER (0)
1da177e4
LT
114#define SLAVE (SMP_CACHE_BYTES/8)
115
116#define NUM_ROUNDS 64 /* magic value */
117#define NUM_ITERS 5 /* likewise */
118
119static DEFINE_SPINLOCK(itc_sync_lock);
120static volatile unsigned long go[SLAVE + 1];
121
122#define DEBUG_ITC_SYNC 0
123
1da177e4
LT
124extern void start_ap (void);
125extern unsigned long ia64_iobase;
126
36c8b586 127struct task_struct *task_for_booting_cpu;
1da177e4
LT
128
129/*
130 * State for each CPU
131 */
132DEFINE_PER_CPU(int, cpu_state);
133
134/* Bitmasks of currently online, and possible CPUs */
135cpumask_t cpu_online_map;
136EXPORT_SYMBOL(cpu_online_map);
69aa234b 137cpumask_t cpu_possible_map = CPU_MASK_NONE;
1da177e4
LT
138EXPORT_SYMBOL(cpu_possible_map);
139
e927ecb0 140cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
42aca483 141EXPORT_SYMBOL(cpu_core_map);
d5a7430d
MT
142DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
143EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
144
e927ecb0 145int smp_num_siblings = 1;
e927ecb0 146
1da177e4
LT
147/* which logical CPU number maps to which CPU (physical APIC ID) */
148volatile int ia64_cpu_to_sapicid[NR_CPUS];
149EXPORT_SYMBOL(ia64_cpu_to_sapicid);
150
151static volatile cpumask_t cpu_callin_map;
152
153struct smp_boot_data smp_boot_data __initdata;
154
155unsigned long ap_wakeup_vector = -1; /* External Int use to wakeup APs */
156
157char __initdata no_int_routing;
158
159unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */
160
ff741906
AR
161#ifdef CONFIG_FORCE_CPEI_RETARGET
162#define CPEI_OVERRIDE_DEFAULT (1)
163#else
164#define CPEI_OVERRIDE_DEFAULT (0)
165#endif
166
167unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT;
168
169static int __init
170cmdl_force_cpei(char *str)
171{
172 int value=0;
173
174 get_option (&str, &value);
175 force_cpei_retarget = value;
176
177 return 1;
178}
179
180__setup("force_cpei=", cmdl_force_cpei);
181
1da177e4
LT
182static int __init
183nointroute (char *str)
184{
185 no_int_routing = 1;
186 printk ("no_int_routing on\n");
187 return 1;
188}
189
190__setup("nointroute", nointroute);
191
ff741906
AR
192static void fix_b0_for_bsp(void)
193{
194#ifdef CONFIG_HOTPLUG_CPU
195 int cpuid;
196 static int fix_bsp_b0 = 1;
197
198 cpuid = smp_processor_id();
199
200 /*
201 * Cache the b0 value on the first AP that comes up
202 */
203 if (!(fix_bsp_b0 && cpuid))
204 return;
205
206 sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0];
207 printk ("Fixed BSP b0 value from CPU %d\n", cpuid);
208
209 fix_bsp_b0 = 0;
210#endif
211}
212
1da177e4
LT
213void
214sync_master (void *arg)
215{
216 unsigned long flags, i;
217
218 go[MASTER] = 0;
219
220 local_irq_save(flags);
221 {
222 for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) {
82975115
DMT
223 while (!go[MASTER])
224 cpu_relax();
1da177e4
LT
225 go[MASTER] = 0;
226 go[SLAVE] = ia64_get_itc();
227 }
228 }
229 local_irq_restore(flags);
230}
231
232/*
233 * Return the number of cycles by which our itc differs from the itc on the master
234 * (time-keeper) CPU. A positive number indicates our itc is ahead of the master,
235 * negative that it is behind.
236 */
237static inline long
238get_delta (long *rt, long *master)
239{
240 unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0;
241 unsigned long tcenter, t0, t1, tm;
242 long i;
243
244 for (i = 0; i < NUM_ITERS; ++i) {
245 t0 = ia64_get_itc();
246 go[MASTER] = 1;
82975115
DMT
247 while (!(tm = go[SLAVE]))
248 cpu_relax();
1da177e4
LT
249 go[SLAVE] = 0;
250 t1 = ia64_get_itc();
251
252 if (t1 - t0 < best_t1 - best_t0)
253 best_t0 = t0, best_t1 = t1, best_tm = tm;
254 }
255
256 *rt = best_t1 - best_t0;
257 *master = best_tm - best_t0;
258
259 /* average best_t0 and best_t1 without overflow: */
260 tcenter = (best_t0/2 + best_t1/2);
261 if (best_t0 % 2 + best_t1 % 2 == 2)
262 ++tcenter;
263 return tcenter - best_tm;
264}
265
266/*
267 * Synchronize ar.itc of the current (slave) CPU with the ar.itc of the MASTER CPU
268 * (normally the time-keeper CPU). We use a closed loop to eliminate the possibility of
269 * unaccounted-for errors (such as getting a machine check in the middle of a calibration
270 * step). The basic idea is for the slave to ask the master what itc value it has and to
271 * read its own itc before and after the master responds. Each iteration gives us three
272 * timestamps:
273 *
274 * slave master
275 *
276 * t0 ---\
277 * ---\
278 * --->
279 * tm
280 * /---
281 * /---
282 * t1 <---
283 *
284 *
285 * The goal is to adjust the slave's ar.itc such that tm falls exactly half-way between t0
286 * and t1. If we achieve this, the clocks are synchronized provided the interconnect
287 * between the slave and the master is symmetric. Even if the interconnect were
288 * asymmetric, we would still know that the synchronization error is smaller than the
289 * roundtrip latency (t0 - t1).
290 *
291 * When the interconnect is quiet and symmetric, this lets us synchronize the itc to
292 * within one or two cycles. However, we can only *guarantee* that the synchronization is
293 * accurate to within a round-trip time, which is typically in the range of several
294 * hundred cycles (e.g., ~500 cycles). In practice, this means that the itc's are usually
295 * almost perfectly synchronized, but we shouldn't assume that the accuracy is much better
296 * than half a micro second or so.
297 */
298void
299ia64_sync_itc (unsigned int master)
300{
301 long i, delta, adj, adjust_latency = 0, done = 0;
302 unsigned long flags, rt, master_time_stamp, bound;
303#if DEBUG_ITC_SYNC
304 struct {
305 long rt; /* roundtrip time */
306 long master; /* master's timestamp */
307 long diff; /* difference between midpoint and master's timestamp */
308 long lat; /* estimate of itc adjustment latency */
309 } t[NUM_ROUNDS];
310#endif
311
312 /*
313 * Make sure local timer ticks are disabled while we sync. If
314 * they were enabled, we'd have to worry about nasty issues
315 * like setting the ITC ahead of (or a long time before) the
316 * next scheduled tick.
317 */
318 BUG_ON((ia64_get_itv() & (1 << 16)) == 0);
319
320 go[MASTER] = 1;
321
8691e5a8 322 if (smp_call_function_single(master, sync_master, NULL, 0) < 0) {
1da177e4
LT
323 printk(KERN_ERR "sync_itc: failed to get attention of CPU %u!\n", master);
324 return;
325 }
326
82975115
DMT
327 while (go[MASTER])
328 cpu_relax(); /* wait for master to be ready */
1da177e4
LT
329
330 spin_lock_irqsave(&itc_sync_lock, flags);
331 {
332 for (i = 0; i < NUM_ROUNDS; ++i) {
333 delta = get_delta(&rt, &master_time_stamp);
334 if (delta == 0) {
335 done = 1; /* let's lock on to this... */
336 bound = rt;
337 }
338
339 if (!done) {
340 if (i > 0) {
341 adjust_latency += -delta;
342 adj = -delta + adjust_latency/4;
343 } else
344 adj = -delta;
345
346 ia64_set_itc(ia64_get_itc() + adj);
347 }
348#if DEBUG_ITC_SYNC
349 t[i].rt = rt;
350 t[i].master = master_time_stamp;
351 t[i].diff = delta;
352 t[i].lat = adjust_latency/4;
353#endif
354 }
355 }
356 spin_unlock_irqrestore(&itc_sync_lock, flags);
357
358#if DEBUG_ITC_SYNC
359 for (i = 0; i < NUM_ROUNDS; ++i)
360 printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n",
361 t[i].rt, t[i].master, t[i].diff, t[i].lat);
362#endif
363
364 printk(KERN_INFO "CPU %d: synchronized ITC with CPU %u (last diff %ld cycles, "
365 "maxerr %lu cycles)\n", smp_processor_id(), master, delta, rt);
366}
367
368/*
369 * Ideally sets up per-cpu profiling hooks. Doesn't do much now...
370 */
371static inline void __devinit
372smp_setup_percpu_timer (void)
373{
374}
375
d86ebd14 376static void __cpuinit
1da177e4
LT
377smp_callin (void)
378{
ff741906 379 int cpuid, phys_id, itc_master;
ead6caae 380 struct cpuinfo_ia64 *last_cpuinfo, *this_cpuinfo;
1da177e4 381 extern void ia64_init_itm(void);
ff741906 382 extern volatile int time_keeper_id;
1da177e4
LT
383
384#ifdef CONFIG_PERFMON
385 extern void pfm_init_percpu(void);
386#endif
387
388 cpuid = smp_processor_id();
389 phys_id = hard_smp_processor_id();
ff741906 390 itc_master = time_keeper_id;
1da177e4
LT
391
392 if (cpu_online(cpuid)) {
393 printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n",
394 phys_id, cpuid);
395 BUG();
396 }
397
ff741906
AR
398 fix_b0_for_bsp();
399
f27b433e 400 ipi_call_lock_irq();
e1b30a39
YI
401 spin_lock(&vector_lock);
402 /* Setup the per cpu irq handling data structures */
403 __setup_vector_irq(cpuid);
e545a614 404 notify_cpu_starting(cpuid);
1da177e4 405 cpu_set(cpuid, cpu_online_map);
a9fa06c2 406 per_cpu(cpu_state, cpuid) = CPU_ONLINE;
e1b30a39 407 spin_unlock(&vector_lock);
f27b433e 408 ipi_call_unlock_irq();
1da177e4
LT
409
410 smp_setup_percpu_timer();
411
412 ia64_mca_cmc_vector_setup(); /* Setup vector on AP */
413
414#ifdef CONFIG_PERFMON
415 pfm_init_percpu();
416#endif
417
418 local_irq_enable();
419
420 if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
421 /*
422 * Synchronize the ITC with the BP. Need to do this after irqs are
423 * enabled because ia64_sync_itc() calls smp_call_function_single(), which
424 * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls
425 * local_bh_enable(), which bugs out if irqs are not enabled...
426 */
ff741906
AR
427 Dprintk("Going to syncup ITC with ITC Master.\n");
428 ia64_sync_itc(itc_master);
1da177e4
LT
429 }
430
431 /*
432 * Get our bogomips.
433 */
434 ia64_init_itm();
ead6caae
JS
435
436 /*
437 * Delay calibration can be skipped if new processor is identical to the
438 * previous processor.
439 */
440 last_cpuinfo = cpu_data(cpuid - 1);
441 this_cpuinfo = local_cpu_data;
442 if (last_cpuinfo->itc_freq != this_cpuinfo->itc_freq ||
443 last_cpuinfo->proc_freq != this_cpuinfo->proc_freq ||
444 last_cpuinfo->features != this_cpuinfo->features ||
445 last_cpuinfo->revision != this_cpuinfo->revision ||
446 last_cpuinfo->family != this_cpuinfo->family ||
447 last_cpuinfo->archrev != this_cpuinfo->archrev ||
448 last_cpuinfo->model != this_cpuinfo->model)
449 calibrate_delay();
1da177e4
LT
450 local_cpu_data->loops_per_jiffy = loops_per_jiffy;
451
452#ifdef CONFIG_IA32_SUPPORT
453 ia32_gdt_init();
454#endif
455
456 /*
457 * Allow the master to continue.
458 */
459 cpu_set(cpuid, cpu_callin_map);
460 Dprintk("Stack on CPU %d at about %p\n",cpuid, &cpuid);
461}
462
463
464/*
465 * Activate a secondary processor. head.S calls this.
466 */
d86ebd14 467int __cpuinit
1da177e4
LT
468start_secondary (void *unused)
469{
470 /* Early console may use I/O ports */
471 ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
10617bbe 472#ifndef CONFIG_PRINTK_TIME
1da177e4 473 Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
10617bbe 474#endif
1da177e4
LT
475 efi_map_pal_code();
476 cpu_init();
5bfb5d69 477 preempt_disable();
1da177e4
LT
478 smp_callin();
479
480 cpu_idle();
481 return 0;
482}
483
6b2fb3c6 484struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
1da177e4
LT
485{
486 return NULL;
487}
488
489struct create_idle {
6d5aefb8 490 struct work_struct work;
1da177e4
LT
491 struct task_struct *idle;
492 struct completion done;
493 int cpu;
494};
495
9d6f40b8 496void __cpuinit
6d5aefb8 497do_fork_idle(struct work_struct *work)
1da177e4 498{
6d5aefb8
DH
499 struct create_idle *c_idle =
500 container_of(work, struct create_idle, work);
1da177e4
LT
501
502 c_idle->idle = fork_idle(c_idle->cpu);
503 complete(&c_idle->done);
504}
505
9d6f40b8 506static int __cpuinit
1da177e4
LT
507do_boot_cpu (int sapicid, int cpu)
508{
509 int timeout;
510 struct create_idle c_idle = {
6d5aefb8 511 .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
1da177e4
LT
512 .cpu = cpu,
513 .done = COMPLETION_INITIALIZER(c_idle.done),
514 };
b8d8b883
AR
515
516 c_idle.idle = get_idle_for_cpu(cpu);
517 if (c_idle.idle) {
518 init_idle(c_idle.idle, cpu);
519 goto do_rest;
520 }
521
1da177e4
LT
522 /*
523 * We can't use kernel_thread since we must avoid to reschedule the child.
524 */
525 if (!keventd_up() || current_is_keventd())
6d5aefb8 526 c_idle.work.func(&c_idle.work);
1da177e4 527 else {
6d5aefb8 528 schedule_work(&c_idle.work);
1da177e4
LT
529 wait_for_completion(&c_idle.done);
530 }
531
532 if (IS_ERR(c_idle.idle))
533 panic("failed fork for CPU %d", cpu);
b8d8b883
AR
534
535 set_idle_for_cpu(cpu, c_idle.idle);
536
537do_rest:
1da177e4
LT
538 task_for_booting_cpu = c_idle.idle;
539
540 Dprintk("Sending wakeup vector %lu to AP 0x%x/0x%x.\n", ap_wakeup_vector, cpu, sapicid);
541
b8d8b883 542 set_brendez_area(cpu);
1da177e4
LT
543 platform_send_ipi(cpu, ap_wakeup_vector, IA64_IPI_DM_INT, 0);
544
545 /*
546 * Wait 10s total for the AP to start
547 */
548 Dprintk("Waiting on callin_map ...");
549 for (timeout = 0; timeout < 100000; timeout++) {
550 if (cpu_isset(cpu, cpu_callin_map))
551 break; /* It has booted */
552 udelay(100);
553 }
554 Dprintk("\n");
555
556 if (!cpu_isset(cpu, cpu_callin_map)) {
557 printk(KERN_ERR "Processor 0x%x/0x%x is stuck.\n", cpu, sapicid);
558 ia64_cpu_to_sapicid[cpu] = -1;
559 cpu_clear(cpu, cpu_online_map); /* was set in smp_callin() */
560 return -EINVAL;
561 }
562 return 0;
563}
564
565static int __init
566decay (char *str)
567{
568 int ticks;
569 get_option (&str, &ticks);
570 return 1;
571}
572
573__setup("decay=", decay);
574
575/*
576 * Initialize the logical CPU number to SAPICID mapping
577 */
578void __init
579smp_build_cpu_map (void)
580{
581 int sapicid, cpu, i;
582 int boot_cpu_id = hard_smp_processor_id();
583
584 for (cpu = 0; cpu < NR_CPUS; cpu++) {
585 ia64_cpu_to_sapicid[cpu] = -1;
1da177e4
LT
586 }
587
588 ia64_cpu_to_sapicid[0] = boot_cpu_id;
589 cpus_clear(cpu_present_map);
590 cpu_set(0, cpu_present_map);
591 cpu_set(0, cpu_possible_map);
592 for (cpu = 1, i = 0; i < smp_boot_data.cpu_count; i++) {
593 sapicid = smp_boot_data.cpu_phys_id[i];
594 if (sapicid == boot_cpu_id)
595 continue;
596 cpu_set(cpu, cpu_present_map);
597 cpu_set(cpu, cpu_possible_map);
598 ia64_cpu_to_sapicid[cpu] = sapicid;
599 cpu++;
600 }
601}
602
1da177e4
LT
603/*
604 * Cycle through the APs sending Wakeup IPIs to boot each.
605 */
606void __init
607smp_prepare_cpus (unsigned int max_cpus)
608{
609 int boot_cpu_id = hard_smp_processor_id();
610
611 /*
612 * Initialize the per-CPU profiling counter/multiplier
613 */
614
615 smp_setup_percpu_timer();
616
617 /*
618 * We have the boot CPU online for sure.
619 */
620 cpu_set(0, cpu_online_map);
621 cpu_set(0, cpu_callin_map);
622
623 local_cpu_data->loops_per_jiffy = loops_per_jiffy;
624 ia64_cpu_to_sapicid[0] = boot_cpu_id;
625
626 printk(KERN_INFO "Boot processor id 0x%x/0x%x\n", 0, boot_cpu_id);
627
628 current_thread_info()->cpu = 0;
629
630 /*
631 * If SMP should be disabled, then really disable it!
632 */
633 if (!max_cpus) {
634 printk(KERN_INFO "SMP mode deactivated.\n");
635 cpus_clear(cpu_online_map);
636 cpus_clear(cpu_present_map);
637 cpus_clear(cpu_possible_map);
638 cpu_set(0, cpu_online_map);
639 cpu_set(0, cpu_present_map);
640 cpu_set(0, cpu_possible_map);
641 return;
642 }
643}
644
645void __devinit smp_prepare_boot_cpu(void)
646{
647 cpu_set(smp_processor_id(), cpu_online_map);
648 cpu_set(smp_processor_id(), cpu_callin_map);
a9fa06c2 649 per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
e51835d5 650 paravirt_post_smp_prepare_boot_cpu();
1da177e4
LT
651}
652
653#ifdef CONFIG_HOTPLUG_CPU
e927ecb0
SS
654static inline void
655clear_cpu_sibling_map(int cpu)
656{
657 int i;
658
d5a7430d
MT
659 for_each_cpu_mask(i, per_cpu(cpu_sibling_map, cpu))
660 cpu_clear(cpu, per_cpu(cpu_sibling_map, i));
e927ecb0
SS
661 for_each_cpu_mask(i, cpu_core_map[cpu])
662 cpu_clear(cpu, cpu_core_map[i]);
663
d5a7430d 664 per_cpu(cpu_sibling_map, cpu) = cpu_core_map[cpu] = CPU_MASK_NONE;
e927ecb0
SS
665}
666
667static void
668remove_siblinginfo(int cpu)
669{
670 int last = 0;
671
672 if (cpu_data(cpu)->threads_per_core == 1 &&
673 cpu_data(cpu)->cores_per_socket == 1) {
674 cpu_clear(cpu, cpu_core_map[cpu]);
d5a7430d 675 cpu_clear(cpu, per_cpu(cpu_sibling_map, cpu));
e927ecb0
SS
676 return;
677 }
678
679 last = (cpus_weight(cpu_core_map[cpu]) == 1 ? 1 : 0);
680
681 /* remove it from all sibling map's */
682 clear_cpu_sibling_map(cpu);
e927ecb0
SS
683}
684
1da177e4 685extern void fixup_irqs(void);
ff741906
AR
686
687int migrate_platform_irqs(unsigned int cpu)
688{
689 int new_cpei_cpu;
690 irq_desc_t *desc = NULL;
691 cpumask_t mask;
692 int retval = 0;
693
694 /*
695 * dont permit CPEI target to removed.
696 */
697 if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) {
698 printk ("CPU (%d) is CPEI Target\n", cpu);
699 if (can_cpei_retarget()) {
700 /*
701 * Now re-target the CPEI to a different processor
702 */
703 new_cpei_cpu = any_online_cpu(cpu_online_map);
704 mask = cpumask_of_cpu(new_cpei_cpu);
705 set_cpei_target_cpu(new_cpei_cpu);
a8553acd 706 desc = irq_desc + ia64_cpe_irq;
ff741906 707 /*
72fdbdce 708 * Switch for now, immediately, we need to do fake intr
ff741906
AR
709 * as other interrupts, but need to study CPEI behaviour with
710 * polling before making changes.
711 */
712 if (desc) {
d1bef4ed
IM
713 desc->chip->disable(ia64_cpe_irq);
714 desc->chip->set_affinity(ia64_cpe_irq, mask);
715 desc->chip->enable(ia64_cpe_irq);
ff741906
AR
716 printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu);
717 }
718 }
719 if (!desc) {
720 printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu);
721 retval = -EBUSY;
722 }
723 }
724 return retval;
725}
726
1da177e4 727/* must be called with cpucontrol mutex held */
1da177e4
LT
728int __cpu_disable(void)
729{
730 int cpu = smp_processor_id();
731
732 /*
733 * dont permit boot processor for now
734 */
ff741906
AR
735 if (cpu == 0 && !bsp_remove_ok) {
736 printk ("Your platform does not support removal of BSP\n");
737 return (-EBUSY);
738 }
739
6e9de181
JK
740 if (ia64_platform_is("sn2")) {
741 if (!sn_cpu_disable_allowed(cpu))
742 return -EBUSY;
743 }
744
ff741906
AR
745 if (migrate_platform_irqs(cpu)) {
746 cpu_set(cpu, cpu_online_map);
747 return (-EBUSY);
748 }
1da177e4 749
e927ecb0 750 remove_siblinginfo(cpu);
1da177e4 751 fixup_irqs();
e7b14036 752 cpu_clear(cpu, cpu_online_map);
1da177e4 753 local_flush_tlb_all();
b8d8b883 754 cpu_clear(cpu, cpu_callin_map);
1da177e4
LT
755 return 0;
756}
757
758void __cpu_die(unsigned int cpu)
759{
760 unsigned int i;
761
762 for (i = 0; i < 100; i++) {
763 /* They ack this in play_dead by setting CPU_DEAD */
764 if (per_cpu(cpu_state, cpu) == CPU_DEAD)
765 {
b8d8b883 766 printk ("CPU %d is now offline\n", cpu);
1da177e4
LT
767 return;
768 }
769 msleep(100);
770 }
771 printk(KERN_ERR "CPU %u didn't die...\n", cpu);
772}
1da177e4
LT
773#endif /* CONFIG_HOTPLUG_CPU */
774
775void
776smp_cpus_done (unsigned int dummy)
777{
778 int cpu;
779 unsigned long bogosum = 0;
780
781 /*
782 * Allow the user to impress friends.
783 */
784
dc565b52 785 for_each_online_cpu(cpu) {
786 bogosum += cpu_data(cpu)->loops_per_jiffy;
787 }
1da177e4
LT
788
789 printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
790 (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
791}
792
e927ecb0
SS
793static inline void __devinit
794set_cpu_sibling_map(int cpu)
795{
796 int i;
797
798 for_each_online_cpu(i) {
799 if ((cpu_data(cpu)->socket_id == cpu_data(i)->socket_id)) {
800 cpu_set(i, cpu_core_map[cpu]);
801 cpu_set(cpu, cpu_core_map[i]);
802 if (cpu_data(cpu)->core_id == cpu_data(i)->core_id) {
d5a7430d
MT
803 cpu_set(i, per_cpu(cpu_sibling_map, cpu));
804 cpu_set(cpu, per_cpu(cpu_sibling_map, i));
e927ecb0
SS
805 }
806 }
807 }
808}
809
9d6f40b8 810int __cpuinit
1da177e4
LT
811__cpu_up (unsigned int cpu)
812{
813 int ret;
814 int sapicid;
815
816 sapicid = ia64_cpu_to_sapicid[cpu];
817 if (sapicid == -1)
818 return -EINVAL;
819
820 /*
b8d8b883
AR
821 * Already booted cpu? not valid anymore since we dont
822 * do idle loop tightspin anymore.
1da177e4
LT
823 */
824 if (cpu_isset(cpu, cpu_callin_map))
b8d8b883
AR
825 return -EINVAL;
826
a9fa06c2 827 per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
1da177e4
LT
828 /* Processor goes to start_secondary(), sets online flag */
829 ret = do_boot_cpu(sapicid, cpu);
830 if (ret < 0)
831 return ret;
832
e927ecb0
SS
833 if (cpu_data(cpu)->threads_per_core == 1 &&
834 cpu_data(cpu)->cores_per_socket == 1) {
d5a7430d 835 cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
e927ecb0
SS
836 cpu_set(cpu, cpu_core_map[cpu]);
837 return 0;
838 }
839
840 set_cpu_sibling_map(cpu);
841
1da177e4
LT
842 return 0;
843}
844
845/*
72fdbdce 846 * Assume that CPUs have been discovered by some platform-dependent interface. For
1da177e4
LT
847 * SoftSDV/Lion, that would be ACPI.
848 *
849 * Setup of the IPI irq handler is done in irq.c:init_IRQ_SMP().
850 */
851void __init
852init_smp_config(void)
853{
854 struct fptr {
855 unsigned long fp;
856 unsigned long gp;
857 } *ap_startup;
858 long sal_ret;
859
72fdbdce 860 /* Tell SAL where to drop the APs. */
1da177e4
LT
861 ap_startup = (struct fptr *) start_ap;
862 sal_ret = ia64_sal_set_vectors(SAL_VECTOR_OS_BOOT_RENDEZ,
863 ia64_tpa(ap_startup->fp), ia64_tpa(ap_startup->gp), 0, 0, 0, 0);
864 if (sal_ret < 0)
865 printk(KERN_ERR "SMP: Can't set SAL AP Boot Rendezvous: %s\n",
866 ia64_sal_strerror(sal_ret));
867}
868
e927ecb0
SS
869/*
870 * identify_siblings(cpu) gets called from identify_cpu. This populates the
871 * information related to logical execution units in per_cpu_data structure.
872 */
873void __devinit
874identify_siblings(struct cpuinfo_ia64 *c)
875{
876 s64 status;
877 u16 pltid;
e927ecb0
SS
878 pal_logical_to_physical_t info;
879
6ff0bc94
AC
880 status = ia64_pal_logical_to_phys(-1, &info);
881 if (status != PAL_STATUS_SUCCESS) {
113134fc
AC
882 if (status != PAL_STATUS_UNIMPLEMENTED) {
883 printk(KERN_ERR
884 "ia64_pal_logical_to_phys failed with %ld\n",
885 status);
886 return;
887 }
888
889 info.overview_ppid = 0;
890 info.overview_cpp = 1;
891 info.overview_tpc = 1;
e927ecb0 892 }
6ff0bc94
AC
893
894 status = ia64_sal_physical_id_info(&pltid);
895 if (status != PAL_STATUS_SUCCESS) {
896 if (status != PAL_STATUS_UNIMPLEMENTED)
897 printk(KERN_ERR
898 "ia64_sal_pltid failed with %ld\n",
899 status);
e927ecb0
SS
900 return;
901 }
e927ecb0
SS
902
903 c->socket_id = (pltid << 8) | info.overview_ppid;
113134fc
AC
904
905 if (info.overview_cpp == 1 && info.overview_tpc == 1)
906 return;
907
e927ecb0
SS
908 c->cores_per_socket = info.overview_cpp;
909 c->threads_per_core = info.overview_tpc;
4129a953 910 c->num_log = info.overview_num_log;
e927ecb0 911
4129a953
FY
912 c->core_id = info.log1_cid;
913 c->thread_id = info.log1_tid;
e927ecb0 914}
dd562c05
SE
915
916/*
917 * returns non zero, if multi-threading is enabled
918 * on at least one physical package. Due to hotplug cpu
919 * and (maxcpus=), all threads may not necessarily be enabled
920 * even though the processor supports multi-threading.
921 */
922int is_multithreading_enabled(void)
923{
924 int i, j;
925
926 for_each_present_cpu(i) {
927 for_each_present_cpu(j) {
928 if (j == i)
929 continue;
930 if ((cpu_data(j)->socket_id == cpu_data(i)->socket_id)) {
931 if (cpu_data(j)->core_id == cpu_data(i)->core_id)
932 return 1;
933 }
934 }
935 }
936 return 0;
937}
938EXPORT_SYMBOL_GPL(is_multithreading_enabled);