[mirror_ubuntu-artful-kernel.git] / arch / m32r / Kconfig

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux/M32R Kernel Configuration"

config M32R
	bool
	default y

config SBUS
	bool

config GENERIC_ISA_DMA
	bool
	default y

config GENERIC_HARDIRQS
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

source "init/Kconfig"


menu "Processor type and features"

choice
	prompt "Platform Type"
	default PLAT_MAPPI

config PLAT_MAPPI
	bool "Mappi-I"
	help
	  The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
	  You can operate a Linux system on this board by using an M32R
	  softmacro core, which is a fully-synthesizable functional model
	  described in Verilog-HDL.

	  The Mappi-I board was the first platform, which had been used
	  to port and develop a Linux system for the M32R processor.
	  Currently, the Mappi-II, an heir to the Mappi-I, is available.

config PLAT_USRV
	bool "uServer"

config PLAT_M32700UT
	bool "M32700UT"
	help
	  The M3T-M32700UT is an evaluation board based on uT-Engine
	  specification.  This board has an M32700 (Chaos) evaluation chip.
	  You can say Y for SMP, because the M32700 is a single chip
	  multiprocessor.

config PLAT_OPSPUT
	bool "OPSPUT"
	help
	  The OPSPUT is an evaluation board based on uT-Engine
	  specification.  This board has a OPSP-REP chip.

config PLAT_OAKS32R
	bool "OAKS32R"
	help
	  The OAKS32R is a tiny, inexpensive evaluation board.
	  Please note that if you say Y here and choose chip "M32102",
	  say N for MMU and select a no-MMU version kernel, otherwise
	  a kernel with MMU support will not work, because the M32102
	  is a microcontroller for embedded systems and it has no MMU.

config PLAT_MAPPI2
       bool "Mappi-II(M3A-ZA36/M3A-ZA52)"

config PLAT_MAPPI3
       bool "Mappi-III(M3A-2170)"

config PLAT_M32104UT
	bool "M32104UT"
	help
	  The M3T-M32104UT is an reference board based on uT-Engine
	  specification.  This board has a M32104 chip.

endchoice

choice
	prompt "Processor family"
	default CHIP_M32700

config CHIP_M32700
	bool "M32700 (Chaos)"

config CHIP_M32102
	bool "M32102"

config CHIP_M32104
	bool "M32104"
	depends on PLAT_M32104UT

config CHIP_VDEC2
       bool "VDEC2"

config CHIP_OPSP
       bool "OPSP"

endchoice

config MMU
	bool "Support for memory management hardware"
	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
	default y

config TLB_ENTRIES
       int "TLB Entries"
       depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
       default 32 if CHIP_M32700 || CHIP_OPSP
       default 16 if CHIP_VDEC2


config ISA_M32R
        bool
	depends on CHIP_M32102 || CHIP_M32104
	default y

config ISA_M32R2
	bool
	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
	default y

config ISA_DSP_LEVEL2
	bool
	depends on CHIP_M32700 || CHIP_OPSP
	default y

config ISA_DUAL_ISSUE
	bool
	depends on CHIP_M32700 || CHIP_OPSP
	default y

config BUS_CLOCK
	int "Bus Clock [Hz] (integer)"
	default "70000000" if PLAT_MAPPI
	default "25000000" if PLAT_USRV
	default "50000000" if PLAT_MAPPI3
	default "50000000" if PLAT_M32700UT
	default "50000000" if PLAT_OPSPUT
	default "54000000" if PLAT_M32104UT
	default "33333333" if PLAT_OAKS32R
	default "20000000" if PLAT_MAPPI2

config TIMER_DIVIDE
	int "Timer divider (integer)"
	default "128"

config CPU_LITTLE_ENDIAN
        bool "Generate little endian code"
	default n

config MEMORY_START
	hex "Physical memory start address (hex)"
	default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3
	default "08000000" if PLAT_USRV
	default "08000000" if PLAT_M32700UT
	default "08000000" if PLAT_OPSPUT
	default "04000000" if PLAT_M32104UT
	default "01000000" if PLAT_OAKS32R

config MEMORY_SIZE
	hex "Physical memory size (hex)"
	default "08000000" if PLAT_MAPPI3
	default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
	default "02000000" if PLAT_USRV
	default "01000000" if PLAT_M32700UT
	default "01000000" if PLAT_OPSPUT
	default "01000000" if PLAT_M32104UT
	default "00800000" if PLAT_OAKS32R

config NOHIGHMEM
	bool
	default y

config ARCH_DISCONTIGMEM_ENABLE
	bool "Internal RAM Support"
	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
	default y

source "mm/Kconfig"

config IRAM_START
	hex "Internal memory start address (hex)"
	default "00f00000" if !CHIP_M32104
	default "00700000" if CHIP_M32104
	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM

config IRAM_SIZE
	hex "Internal memory size (hex)"
	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
	default "00080000" if CHIP_M32700
	default "00010000" if CHIP_M32102 || CHIP_OPSP || CHIP_M32104
	default "00008000" if CHIP_VDEC2

#
# Define implied options from the CPU selection here
#

config RWSEM_GENERIC_SPINLOCK
	bool
	depends on M32R
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool
	default n

config GENERIC_FIND_NEXT_BIT
	bool
	default y

config GENERIC_HWEIGHT
	bool
	default y

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config PREEMPT
	bool "Preemptible Kernel"
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

config SMP
	bool "Symmetric multi-processing support"
	---help---
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
	  singleprocessor machines. On a singleprocessor machine, the kernel
	  will run faster if you say N here.

	  People using multiprocessor machines who say Y here should also say
	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	  Management" code will be disabled if you say Y here.

	  See also the <file:Documentation/smp.txt>,
	  and the SMP-HOWTO available at
	  <http://www.linuxdoc.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config CHIP_M32700_TS1
	bool "Workaround code for the M32700 TS1 chip's bug"
	depends on (CHIP_M32700 && SMP)
	default n

config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "2"
	help
	  This allows you to specify the maximum number of CPUs which this
	  kernel will support.  The maximum supported value is 32 and the
	  minimum value which makes sense is 2.

	  This is purely to save memory - each supported CPU adds
	  approximately eight kilobytes to the kernel image.

# Common NUMA Features
config NUMA
	bool "Numa Memory Allocation Support"
	depends on SMP && BROKEN
	default n

config NODES_SHIFT
	int
	default "1"
	depends on NEED_MULTIPLE_NODES

# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
	bool
	depends on NUMA
	default n

endmenu


menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"

config PCI
	bool "PCI support"
	depends on BROKEN
	default n
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	  VESA. If you have PCI, say Y, otherwise N.

	  The PCI-HOWTO, available from
	  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
	  information about which PCI hardware does work under Linux and which
	  doesn't.

choice
	prompt "PCI access mode"
	depends on PCI
	default PCI_GOANY

config PCI_GOBIOS
	bool "BIOS"
	---help---
	  On PCI systems, the BIOS can be used to detect the PCI devices and
	  determine their configuration. However, some old PCI motherboards
	  have BIOS bugs and may crash if this is done. Also, some embedded
	  PCI-based systems don't have any BIOS at all. Linux can also try to
	  detect the PCI hardware directly without using the BIOS.

	  With this option, you can specify how Linux should detect the PCI
	  devices. If you choose "BIOS", the BIOS will be used, if you choose
	  "Direct", the BIOS won't be used, and if you choose "Any", the
	  kernel will try the direct access method and falls back to the BIOS
	  if that doesn't work. If unsure, go with the default, which is
	  "Any".

config PCI_GODIRECT
	bool "Direct"

config PCI_GOANY
	bool "Any"

endchoice

config PCI_BIOS
	bool
	depends on PCI && (PCI_GOBIOS || PCI_GOANY)
	default y

config PCI_DIRECT
	bool
 	depends on PCI && (PCI_GODIRECT || PCI_GOANY)
	default y

source "drivers/pci/Kconfig"

config ISA
	bool "ISA support"
	help
	  Find out whether you have ISA slots on your motherboard.  ISA is the
	  name of a bus system, i.e. the way the CPU talks to the other stuff
	  inside your box.  If you have ISA, say Y, otherwise N.

source "drivers/pcmcia/Kconfig"

source "drivers/pci/hotplug/Kconfig"

endmenu


menu "Executable file formats"

source "fs/Kconfig.binfmt"

endmenu

source "net/Kconfig"

source "drivers/Kconfig"

source "fs/Kconfig"

source "arch/m32r/oprofile/Kconfig"

source "arch/m32r/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"
Commit	Line	Data
1da177e4 LT	1	#
	2	# For a description of the syntax of this configuration file,
	3	# see Documentation/kbuild/kconfig-language.txt.
	4	#
	5
	6	mainmenu "Linux/M32R Kernel Configuration"
	7
	8	config M32R
	9	bool
	10	default y
	11
	12	config SBUS
	13	bool
	14
1da177e4 LT	15	config GENERIC_ISA_DMA
	16	bool
	17	default y
	18
	19	config GENERIC_HARDIRQS
	20	bool
	21	default y
	22
	23	config GENERIC_IRQ_PROBE
	24	bool
	25	default y
	26
	27	source "init/Kconfig"
	28
	29
	30	menu "Processor type and features"
	31
	32	choice
	33	prompt "Platform Type"
	34	default PLAT_MAPPI
	35
	36	config PLAT_MAPPI
	37	bool "Mappi-I"
	38	help
	39	The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
	40	You can operate a Linux system on this board by using an M32R
	41	softmacro core, which is a fully-synthesizable functional model
	42	described in Verilog-HDL.
	43
	44	The Mappi-I board was the first platform, which had been used
	45	to port and develop a Linux system for the M32R processor.
	46	Currently, the Mappi-II, an heir to the Mappi-I, is available.
	47
	48	config PLAT_USRV
	49	bool "uServer"
	50
	51	config PLAT_M32700UT
	52	bool "M32700UT"
	53	help
	54	The M3T-M32700UT is an evaluation board based on uT-Engine
	55	specification. This board has an M32700 (Chaos) evaluation chip.
	56	You can say Y for SMP, because the M32700 is a single chip
	57	multiprocessor.
	58
	59	config PLAT_OPSPUT
	60	bool "OPSPUT"
	61	help
	62	The OPSPUT is an evaluation board based on uT-Engine
	63	specification. This board has a OPSP-REP chip.
	64
	65	config PLAT_OAKS32R
	66	bool "OAKS32R"
	67	help
	68	The OAKS32R is a tiny, inexpensive evaluation board.
	69	Please note that if you say Y here and choose chip "M32102",
	70	say N for MMU and select a no-MMU version kernel, otherwise
	71	a kernel with MMU support will not work, because the M32102
	72	is a microcontroller for embedded systems and it has no MMU.
	73
	74	config PLAT_MAPPI2
	75	bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
	76
23680863 HT	77	config PLAT_MAPPI3
	78	bool "Mappi-III(M3A-2170)"
	79
9287d95e HT	80	config PLAT_M32104UT
	81	bool "M32104UT"
	82	help
	83	The M3T-M32104UT is an reference board based on uT-Engine
	84	specification. This board has a M32104 chip.
	85
1da177e4 LT	86	endchoice
	87
	88	choice
	89	prompt "Processor family"
	90	default CHIP_M32700
	91
	92	config CHIP_M32700
	93	bool "M32700 (Chaos)"
	94
	95	config CHIP_M32102
	96	bool "M32102"
	97
9287d95e HT	98	config CHIP_M32104
	99	bool "M32104"
	100	depends on PLAT_M32104UT
	101
1da177e4 LT	102	config CHIP_VDEC2
	103	bool "VDEC2"
	104
	105	config CHIP_OPSP
	106	bool "OPSP"
	107
	108	endchoice
	109
	110	config MMU
	111	bool "Support for memory management hardware"
	112	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	113	default y
	114
	115	config TLB_ENTRIES
	116	int "TLB Entries"
	117	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	118	default 32 if CHIP_M32700 \|\| CHIP_OPSP
	119	default 16 if CHIP_VDEC2
	120
	121
	122	config ISA_M32R
	123	bool
9287d95e	124	depends on CHIP_M32102 \|\| CHIP_M32104
1da177e4 LT	125	default y
	126
	127	config ISA_M32R2
	128	bool
	129	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	130	default y
	131
	132	config ISA_DSP_LEVEL2
	133	bool
	134	depends on CHIP_M32700 \|\| CHIP_OPSP
	135	default y
	136
	137	config ISA_DUAL_ISSUE
	138	bool
	139	depends on CHIP_M32700 \|\| CHIP_OPSP
	140	default y
	141
	142	config BUS_CLOCK
	143	int "Bus Clock [Hz] (integer)"
	144	default "70000000" if PLAT_MAPPI
	145	default "25000000" if PLAT_USRV
23680863	146	default "50000000" if PLAT_MAPPI3
1da177e4 LT	147	default "50000000" if PLAT_M32700UT
1da177e4 LT	148	default "50000000" if PLAT_OPSPUT
9287d95e	149	default "54000000" if PLAT_M32104UT
1da177e4 LT	150	default "33333333" if PLAT_OAKS32R
	151	default "20000000" if PLAT_MAPPI2
	152
	153	config TIMER_DIVIDE
	154	int "Timer divider (integer)"
	155	default "128"
	156
	157	config CPU_LITTLE_ENDIAN
	158	bool "Generate little endian code"
	159	default n
	160
	161	config MEMORY_START
	162	hex "Physical memory start address (hex)"
23680863	163	default "08000000" if PLAT_MAPPI \|\| PLAT_MAPPI2 \|\| PLAT_MAPPI3
1da177e4 LT	164	default "08000000" if PLAT_USRV
	165	default "08000000" if PLAT_M32700UT
	166	default "08000000" if PLAT_OPSPUT
9287d95e	167	default "04000000" if PLAT_M32104UT
1da177e4 LT	168	default "01000000" if PLAT_OAKS32R
	169
	170	config MEMORY_SIZE
	171	hex "Physical memory size (hex)"
23680863	172	default "08000000" if PLAT_MAPPI3
1da177e4 LT	173	default "04000000" if PLAT_MAPPI \|\| PLAT_MAPPI2
	174	default "02000000" if PLAT_USRV
	175	default "01000000" if PLAT_M32700UT
	176	default "01000000" if PLAT_OPSPUT
9287d95e	177	default "01000000" if PLAT_M32104UT
1da177e4 LT	178	default "00800000" if PLAT_OAKS32R
	179
	180	config NOHIGHMEM
	181	bool
	182	default y
	183
3f22ab27	184	config ARCH_DISCONTIGMEM_ENABLE
1da177e4	185	bool "Internal RAM Support"
9287d95e	186	depends on CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104
1da177e4 LT	187	default y
1da177e4 LT	188
3f22ab27 DH	189	source "mm/Kconfig"
3f22ab27 DH	190
1da177e4 LT	191	config IRAM_START
1da177e4 LT	192	hex "Internal memory start address (hex)"
9287d95e HT	193	default "00f00000" if !CHIP_M32104
	194	default "00700000" if CHIP_M32104
	195	depends on (CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104) && DISCONTIGMEM
1da177e4 LT	196
	197	config IRAM_SIZE
	198	hex "Internal memory size (hex)"
9287d95e	199	depends on (CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104) && DISCONTIGMEM
1da177e4	200	default "00080000" if CHIP_M32700
9287d95e	201	default "00010000" if CHIP_M32102 \|\| CHIP_OPSP \|\| CHIP_M32104
1da177e4 LT	202	default "00008000" if CHIP_VDEC2
	203
	204	#
	205	# Define implied options from the CPU selection here
	206	#
	207
	208	config RWSEM_GENERIC_SPINLOCK
	209	bool
	210	depends on M32R
	211	default y
	212
	213	config RWSEM_XCHGADD_ALGORITHM
	214	bool
	215	default n
	216
6d9f937b AM	217	config GENERIC_FIND_NEXT_BIT
	218	bool
	219	default y
	220
	221	config GENERIC_HWEIGHT
	222	bool
	223	default y
	224
1da177e4 LT	225	config GENERIC_CALIBRATE_DELAY
	226	bool
	227	default y
	228
	229	config PREEMPT
	230	bool "Preemptible Kernel"
	231	help
	232	This option reduces the latency of the kernel when reacting to
	233	real-time or interactive events by allowing a low priority process to
	234	be preempted even if it is in kernel mode executing a system call.
	235	This allows applications to run more reliably even when the system is
	236	under load.
	237
	238	Say Y here if you are building a kernel for a desktop, embedded
	239	or real-time system. Say N if you are unsure.
	240
1da177e4 LT	241	config SMP
	242	bool "Symmetric multi-processing support"
	243	---help---
	244	This enables support for systems with more than one CPU. If you have
	245	a system with only one CPU, like most personal computers, say N. If
	246	you have a system with more than one CPU, say Y.
	247
	248	If you say N here, the kernel will run on single and multiprocessor
	249	machines, but will use only one CPU of a multiprocessor machine. If
	250	you say Y here, the kernel will run on many, but not all,
	251	singleprocessor machines. On a singleprocessor machine, the kernel
	252	will run faster if you say N here.
	253
	254	People using multiprocessor machines who say Y here should also say
	255	Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	256	Management" code will be disabled if you say Y here.
	257
12c62c2e AO	258	See also the <file:Documentation/smp.txt>,
12c62c2e AO	259	and the SMP-HOWTO available at
1da177e4 LT	260	<http://www.linuxdoc.org/docs.html#howto>.
	261
	262	If you don't know what to do here, say N.
	263
	264	config CHIP_M32700_TS1
	265	bool "Workaround code for the M32700 TS1 chip's bug"
	266	depends on (CHIP_M32700 && SMP)
	267	default n
	268
	269	config NR_CPUS
	270	int "Maximum number of CPUs (2-32)"
	271	range 2 32
	272	depends on SMP
	273	default "2"
	274	help
	275	This allows you to specify the maximum number of CPUs which this
	276	kernel will support. The maximum supported value is 32 and the
	277	minimum value which makes sense is 2.
	278
	279	This is purely to save memory - each supported CPU adds
	280	approximately eight kilobytes to the kernel image.
	281
	282	# Common NUMA Features
	283	config NUMA
	284	bool "Numa Memory Allocation Support"
c5596b26	285	depends on SMP && BROKEN
1da177e4 LT	286	default n
1da177e4 LT	287
c80d79d7 YG	288	config NODES_SHIFT
	289	int
	290	default "1"
	291	depends on NEED_MULTIPLE_NODES
	292
1da177e4 LT	293	# turning this on wastes a bunch of space.
	294	# Summit needs it only when NUMA is on
	295	config BOOT_IOREMAP
	296	bool
	297	depends on NUMA
	298	default n
	299
	300	endmenu
	301
	302
	303	menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
	304
	305	config PCI
	306	bool "PCI support"
c3a0f771	307	depends on BROKEN
1da177e4 LT	308	default n
	309	help
	310	Find out whether you have a PCI motherboard. PCI is the name of a
	311	bus system, i.e. the way the CPU talks to the other stuff inside
	312	your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	313	VESA. If you have PCI, say Y, otherwise N.
	314
	315	The PCI-HOWTO, available from
	316	<http://www.linuxdoc.org/docs.html#howto>, contains valuable
	317	information about which PCI hardware does work under Linux and which
	318	doesn't.
	319
	320	choice
	321	prompt "PCI access mode"
	322	depends on PCI
	323	default PCI_GOANY
	324
	325	config PCI_GOBIOS
	326	bool "BIOS"
	327	---help---
	328	On PCI systems, the BIOS can be used to detect the PCI devices and
	329	determine their configuration. However, some old PCI motherboards
	330	have BIOS bugs and may crash if this is done. Also, some embedded
	331	PCI-based systems don't have any BIOS at all. Linux can also try to
	332	detect the PCI hardware directly without using the BIOS.
	333
	334	With this option, you can specify how Linux should detect the PCI
	335	devices. If you choose "BIOS", the BIOS will be used, if you choose
	336	"Direct", the BIOS won't be used, and if you choose "Any", the
	337	kernel will try the direct access method and falls back to the BIOS
	338	if that doesn't work. If unsure, go with the default, which is
	339	"Any".
	340
	341	config PCI_GODIRECT
	342	bool "Direct"
	343
	344	config PCI_GOANY
	345	bool "Any"
	346
	347	endchoice
	348
	349	config PCI_BIOS
	350	bool
	351	depends on PCI && (PCI_GOBIOS \|\| PCI_GOANY)
	352	default y
	353
	354	config PCI_DIRECT
	355	bool
	356	depends on PCI && (PCI_GODIRECT \|\| PCI_GOANY)
	357	default y
	358
	359	source "drivers/pci/Kconfig"
	360
	361	config ISA
	362	bool "ISA support"
	363	help
	364	Find out whether you have ISA slots on your motherboard. ISA is the
	365	name of a bus system, i.e. the way the CPU talks to the other stuff
	366	inside your box. If you have ISA, say Y, otherwise N.
	367
	368	source "drivers/pcmcia/Kconfig"
	369
	370	source "drivers/pci/hotplug/Kconfig"
	371
372	endmenu
373
374
375	menu "Executable file formats"
376
377	source "fs/Kconfig.binfmt"
378
379	endmenu
380
d5950b43 SR	381	source "net/Kconfig"
d5950b43 SR	382
1da177e4 LT	383	source "drivers/Kconfig"
	384
	385	source "fs/Kconfig"
	386
	387	source "arch/m32r/oprofile/Kconfig"
	388
	389	source "arch/m32r/Kconfig.debug"
	390
	391	source "security/Kconfig"
	392
	393	source "crypto/Kconfig"
	394
	395	source "lib/Kconfig"