]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # For a description of the syntax of this configuration file, | |
3 | # see Documentation/kbuild/kconfig-language.txt. | |
4 | # | |
5 | config M68K | |
6 | bool | |
7 | default y | |
8 | ||
9 | config MMU | |
10 | bool | |
11 | default y | |
12 | ||
13 | config UID16 | |
14 | bool | |
15 | default y | |
16 | ||
17 | config RWSEM_GENERIC_SPINLOCK | |
18 | bool | |
19 | default y | |
20 | ||
21 | config RWSEM_XCHGADD_ALGORITHM | |
22 | bool | |
23 | ||
24 | config GENERIC_CALIBRATE_DELAY | |
25 | bool | |
26 | default y | |
27 | ||
a08b6b79 AV |
28 | config ARCH_MAY_HAVE_PC_FDC |
29 | bool | |
30 | depends on Q40 || (BROKEN && SUN3X) | |
31 | default y | |
32 | ||
1da177e4 LT |
33 | mainmenu "Linux/68k Kernel Configuration" |
34 | ||
35 | source "init/Kconfig" | |
36 | ||
37 | menu "Platform dependent setup" | |
38 | ||
39 | config EISA | |
40 | bool | |
41 | ---help--- | |
42 | The Extended Industry Standard Architecture (EISA) bus was | |
43 | developed as an open alternative to the IBM MicroChannel bus. | |
44 | ||
45 | The EISA bus provided some of the features of the IBM MicroChannel | |
46 | bus while maintaining backward compatibility with cards made for | |
47 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
48 | 1995 when it was made obsolete by the PCI bus. | |
49 | ||
50 | Say Y here if you are building a kernel for an EISA-based machine. | |
51 | ||
52 | Otherwise, say N. | |
53 | ||
54 | config MCA | |
55 | bool | |
56 | help | |
57 | MicroChannel Architecture is found in some IBM PS/2 machines and | |
58 | laptops. It is a bus system similar to PCI or ISA. See | |
59 | <file:Documentation/mca.txt> (and especially the web page given | |
60 | there) before attempting to build an MCA bus kernel. | |
61 | ||
62 | config PCMCIA | |
63 | tristate | |
64 | ---help--- | |
65 | Say Y here if you want to attach PCMCIA- or PC-cards to your Linux | |
66 | computer. These are credit-card size devices such as network cards, | |
67 | modems or hard drives often used with laptops computers. There are | |
68 | actually two varieties of these cards: the older 16 bit PCMCIA cards | |
69 | and the newer 32 bit CardBus cards. If you want to use CardBus | |
70 | cards, you need to say Y here and also to "CardBus support" below. | |
71 | ||
72 | To use your PC-cards, you will need supporting software from David | |
73 | Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> | |
74 | for location). Please also read the PCMCIA-HOWTO, available from | |
75 | <http://www.tldp.org/docs.html#howto>. | |
76 | ||
77 | To compile this driver as modules, choose M here: the | |
78 | modules will be called pcmcia_core and ds. | |
79 | ||
80 | config SUN3 | |
81 | bool "Sun3 support" | |
82 | select M68020 | |
83 | select MMU_SUN3 if MMU | |
84 | help | |
85 | This option enables support for the Sun 3 series of workstations | |
86 | (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires | |
87 | that all other hardware types must be disabled, as Sun 3 kernels | |
88 | are incompatible with all other m68k targets (including Sun 3x!). | |
89 | ||
90 | If you don't want to compile a kernel exclusively for a Sun 3, say N. | |
91 | ||
92 | config AMIGA | |
93 | bool "Amiga support" | |
94 | depends on !MMU_SUN3 | |
95 | help | |
96 | This option enables support for the Amiga series of computers. If | |
97 | you plan to use this kernel on an Amiga, say Y here and browse the | |
98 | material available in <file:Documentation/m68k>; otherwise say N. | |
99 | ||
100 | config ATARI | |
101 | bool "Atari support" | |
102 | depends on !MMU_SUN3 | |
103 | help | |
104 | This option enables support for the 68000-based Atari series of | |
105 | computers (including the TT, Falcon and Medusa). If you plan to use | |
106 | this kernel on an Atari, say Y here and browse the material | |
107 | available in <file:Documentation/m68k>; otherwise say N. | |
108 | ||
109 | config HADES | |
110 | bool "Hades support" | |
111 | depends on ATARI && BROKEN | |
112 | help | |
113 | This option enables support for the Hades Atari clone. If you plan | |
114 | to use this kernel on a Hades, say Y here; otherwise say N. | |
115 | ||
116 | config PCI | |
117 | bool | |
118 | depends on HADES | |
119 | default y | |
120 | help | |
121 | Find out whether you have a PCI motherboard. PCI is the name of a | |
122 | bus system, i.e. the way the CPU talks to the other stuff inside | |
123 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
124 | VESA. If you have PCI, say Y, otherwise N. | |
125 | ||
126 | The PCI-HOWTO, available from | |
127 | <http://www.tldp.org/docs.html#howto>, contains valuable | |
128 | information about which PCI hardware does work under Linux and which | |
129 | doesn't. | |
130 | ||
131 | config MAC | |
132 | bool "Macintosh support" | |
133 | depends on !MMU_SUN3 | |
134 | help | |
135 | This option enables support for the Apple Macintosh series of | |
136 | computers (yes, there is experimental support now, at least for part | |
137 | of the series). | |
138 | ||
139 | Say N unless you're willing to code the remaining necessary support. | |
140 | ;) | |
141 | ||
142 | config NUBUS | |
143 | bool | |
144 | depends on MAC | |
145 | default y | |
146 | ||
147 | config M68K_L2_CACHE | |
148 | bool | |
149 | depends on MAC | |
150 | default y | |
151 | ||
152 | config APOLLO | |
153 | bool "Apollo support" | |
154 | depends on !MMU_SUN3 | |
155 | help | |
156 | Say Y here if you want to run Linux on an MC680x0-based Apollo | |
157 | Domain workstation such as the DN3500. | |
158 | ||
159 | config VME | |
160 | bool "VME (Motorola and BVM) support" | |
161 | depends on !MMU_SUN3 | |
162 | help | |
163 | Say Y here if you want to build a kernel for a 680x0 based VME | |
164 | board. Boards currently supported include Motorola boards MVME147, | |
165 | MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and | |
166 | BVME6000 boards from BVM Ltd are also supported. | |
167 | ||
168 | config MVME147 | |
169 | bool "MVME147 support" | |
170 | depends on VME | |
171 | help | |
172 | Say Y to include support for early Motorola VME boards. This will | |
173 | build a kernel which can run on MVME147 single-board computers. If | |
174 | you select this option you will have to select the appropriate | |
175 | drivers for SCSI, Ethernet and serial ports later on. | |
176 | ||
177 | config MVME16x | |
178 | bool "MVME162, 166 and 167 support" | |
179 | depends on VME | |
180 | help | |
181 | Say Y to include support for Motorola VME boards. This will build a | |
182 | kernel which can run on MVME162, MVME166, MVME167, MVME172, and | |
183 | MVME177 boards. If you select this option you will have to select | |
184 | the appropriate drivers for SCSI, Ethernet and serial ports later | |
185 | on. | |
186 | ||
187 | config BVME6000 | |
188 | bool "BVME4000 and BVME6000 support" | |
189 | depends on VME | |
190 | help | |
191 | Say Y to include support for VME boards from BVM Ltd. This will | |
192 | build a kernel which can run on BVME4000 and BVME6000 boards. If | |
193 | you select this option you will have to select the appropriate | |
194 | drivers for SCSI, Ethernet and serial ports later on. | |
195 | ||
196 | config HP300 | |
197 | bool "HP9000/300 and HP9000/400 support" | |
198 | depends on !MMU_SUN3 | |
199 | help | |
200 | This option enables support for the HP9000/300 and HP9000/400 series | |
201 | of workstations. Support for these machines is still somewhat | |
202 | experimental. If you plan to try to use the kernel on such a machine | |
203 | say Y here. | |
204 | Everybody else says N. | |
205 | ||
206 | config DIO | |
207 | bool "DIO bus support" | |
208 | depends on HP300 | |
209 | default y | |
210 | help | |
211 | Say Y here to enable support for the "DIO" expansion bus used in | |
212 | HP300 machines. If you are using such a system you almost certainly | |
213 | want this. | |
214 | ||
215 | config SUN3X | |
216 | bool "Sun3x support" | |
217 | depends on !MMU_SUN3 | |
218 | select M68030 | |
219 | help | |
220 | This option enables support for the Sun 3x series of workstations. | |
221 | Be warned that this support is very experimental. | |
222 | Note that Sun 3x kernels are not compatible with Sun 3 hardware. | |
223 | General Linux information on the Sun 3x series (now discontinued) | |
224 | is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. | |
225 | ||
226 | If you don't want to compile a kernel for a Sun 3x, say N. | |
227 | ||
228 | config Q40 | |
229 | bool "Q40/Q60 support" | |
230 | depends on !MMU_SUN3 | |
231 | help | |
232 | The Q40 is a Motorola 68040-based successor to the Sinclair QL | |
233 | manufactured in Germany. There is an official Q40 home page at | |
234 | <http://www.q40.de/>. This option enables support for the Q40 and | |
235 | Q60. Select your CPU below. For 68LC060 don't forget to enable FPU | |
236 | emulation. | |
237 | ||
238 | comment "Processor type" | |
239 | ||
240 | config M68020 | |
241 | bool "68020 support" | |
242 | help | |
243 | If you anticipate running this kernel on a computer with a MC68020 | |
244 | processor, say Y. Otherwise, say N. Note that the 68020 requires a | |
245 | 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the | |
246 | Sun 3, which provides its own version. | |
247 | ||
248 | config M68030 | |
249 | bool "68030 support" | |
250 | depends on !MMU_SUN3 | |
251 | help | |
252 | If you anticipate running this kernel on a computer with a MC68030 | |
253 | processor, say Y. Otherwise, say N. Note that a MC68EC030 will not | |
254 | work, as it does not include an MMU (Memory Management Unit). | |
255 | ||
256 | config M68040 | |
257 | bool "68040 support" | |
258 | depends on !MMU_SUN3 | |
259 | help | |
260 | If you anticipate running this kernel on a computer with a MC68LC040 | |
261 | or MC68040 processor, say Y. Otherwise, say N. Note that an | |
262 | MC68EC040 will not work, as it does not include an MMU (Memory | |
263 | Management Unit). | |
264 | ||
265 | config M68060 | |
266 | bool "68060 support" | |
267 | depends on !MMU_SUN3 | |
268 | help | |
269 | If you anticipate running this kernel on a computer with a MC68060 | |
270 | processor, say Y. Otherwise, say N. | |
271 | ||
272 | config MMU_MOTOROLA | |
273 | bool | |
274 | depends on MMU && !MMU_SUN3 | |
275 | default y | |
276 | ||
277 | config MMU_SUN3 | |
278 | bool | |
279 | ||
280 | config M68KFPU_EMU | |
281 | bool "Math emulation support (EXPERIMENTAL)" | |
282 | depends on EXPERIMENTAL | |
283 | help | |
284 | At some point in the future, this will cause floating-point math | |
285 | instructions to be emulated by the kernel on machines that lack a | |
286 | floating-point math coprocessor. Thrill-seekers and chronically | |
287 | sleep-deprived psychotic hacker types can say Y now, everyone else | |
288 | should probably wait a while. | |
289 | ||
290 | config M68KFPU_EMU_EXTRAPREC | |
291 | bool "Math emulation extra precision" | |
292 | depends on M68KFPU_EMU | |
293 | help | |
294 | The fpu uses normally a few bit more during calculations for | |
295 | correct rounding, the emulator can (often) do the same but this | |
296 | extra calculation can cost quite some time, so you can disable | |
297 | it here. The emulator will then "only" calculate with a 64 bit | |
298 | mantissa and round slightly incorrect, what is more then enough | |
299 | for normal usage. | |
300 | ||
301 | config M68KFPU_EMU_ONLY | |
302 | bool "Math emulation only kernel" | |
303 | depends on M68KFPU_EMU | |
304 | help | |
305 | This option prevents any floating-point instructions from being | |
306 | compiled into the kernel, thereby the kernel doesn't save any | |
307 | floating point context anymore during task switches, so this | |
308 | kernel will only be usable on machines without a floating-point | |
309 | math coprocessor. This makes the kernel a bit faster as no tests | |
310 | needs to be executed whether a floating-point instruction in the | |
311 | kernel should be executed or not. | |
312 | ||
313 | config ADVANCED | |
314 | bool "Advanced configuration options" | |
315 | ---help--- | |
316 | This gives you access to some advanced options for the CPU. The | |
317 | defaults should be fine for most users, but these options may make | |
318 | it possible for you to improve performance somewhat if you know what | |
319 | you are doing. | |
320 | ||
321 | Note that the answer to this question won't directly affect the | |
322 | kernel: saying N will just cause the configurator to skip all | |
323 | the questions about these options. | |
324 | ||
325 | Most users should say N to this question. | |
326 | ||
327 | config RMW_INSNS | |
328 | bool "Use read-modify-write instructions" | |
329 | depends on ADVANCED | |
330 | ---help--- | |
331 | This allows to use certain instructions that work with indivisible | |
332 | read-modify-write bus cycles. While this is faster than the | |
333 | workaround of disabling interrupts, it can conflict with DMA | |
334 | ( = direct memory access) on many Amiga systems, and it is also said | |
335 | to destabilize other machines. It is very likely that this will | |
336 | cause serious problems on any Amiga or Atari Medusa if set. The only | |
337 | configuration where it should work are 68030-based Ataris, where it | |
338 | apparently improves performance. But you've been warned! Unless you | |
339 | really know what you are doing, say N. Try Y only if you're quite | |
340 | adventurous. | |
341 | ||
342 | config SINGLE_MEMORY_CHUNK | |
343 | bool "Use one physical chunk of memory only" | |
344 | depends on ADVANCED && !SUN3 | |
345 | help | |
346 | Ignore all but the first contiguous chunk of physical memory for VM | |
347 | purposes. This will save a few bytes kernel size and may speed up | |
348 | some operations. Say N if not sure. | |
349 | ||
350 | config 060_WRITETHROUGH | |
351 | bool "Use write-through caching for 68060 supervisor accesses" | |
352 | depends on ADVANCED && M68060 | |
353 | ---help--- | |
354 | The 68060 generally uses copyback caching of recently accessed data. | |
355 | Copyback caching means that memory writes will be held in an on-chip | |
356 | cache and only written back to memory some time later. Saying Y | |
357 | here will force supervisor (kernel) accesses to use writethrough | |
358 | caching. Writethrough caching means that data is written to memory | |
359 | straight away, so that cache and memory data always agree. | |
360 | Writethrough caching is less efficient, but is needed for some | |
361 | drivers on 68060 based systems where the 68060 bus snooping signal | |
362 | is hardwired on. The 53c710 SCSI driver is known to suffer from | |
363 | this problem. | |
364 | ||
3f22ab27 DH |
365 | source "mm/Kconfig" |
366 | ||
1da177e4 LT |
367 | endmenu |
368 | ||
369 | menu "General setup" | |
370 | ||
371 | source "fs/Kconfig.binfmt" | |
372 | ||
373 | config ZORRO | |
374 | bool "Amiga Zorro (AutoConfig) bus support" | |
375 | depends on AMIGA | |
376 | help | |
377 | This enables support for the Zorro bus in the Amiga. If you have | |
378 | expansion cards in your Amiga that conform to the Amiga | |
379 | AutoConfig(tm) specification, say Y, otherwise N. Note that even | |
380 | expansion cards that do not fit in the Zorro slots but fit in e.g. | |
381 | the CPU slot may fall in this category, so you have to say Y to let | |
382 | Linux use these. | |
383 | ||
384 | config AMIGA_PCMCIA | |
385 | bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)" | |
386 | depends on AMIGA && EXPERIMENTAL | |
387 | help | |
388 | Include support in the kernel for pcmcia on Amiga 1200 and Amiga | |
389 | 600. If you intend to use pcmcia cards say Y; otherwise say N. | |
390 | ||
1da177e4 LT |
391 | config STRAM_PROC |
392 | bool "ST-RAM statistics in /proc" | |
393 | depends on ATARI | |
394 | help | |
f9c98d02 | 395 | Say Y here to report ST-RAM usage statistics in /proc/stram. |
1da177e4 LT |
396 | |
397 | config HEARTBEAT | |
398 | bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 | |
399 | default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 | |
400 | help | |
401 | Use the power-on LED on your machine as a load meter. The exact | |
402 | behavior is platform-dependent, but normally the flash frequency is | |
403 | a hyperbolic function of the 5-minute load average. | |
404 | ||
405 | # We have a dedicated heartbeat LED. :-) | |
406 | config PROC_HARDWARE | |
407 | bool "/proc/hardware support" | |
408 | help | |
409 | Say Y here to support the /proc/hardware file, which gives you | |
410 | access to information about the machine you're running on, | |
411 | including the model, CPU, MMU, clock speed, BogoMIPS rating, | |
412 | and memory size. | |
413 | ||
414 | config ISA | |
415 | bool | |
416 | depends on Q40 || AMIGA_PCMCIA || GG2 | |
417 | default y | |
418 | help | |
419 | Find out whether you have ISA slots on your motherboard. ISA is the | |
420 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
421 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
422 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
423 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
424 | ||
425 | config GENERIC_ISA_DMA | |
426 | bool | |
427 | depends on Q40 || AMIGA_PCMCIA || GG2 | |
428 | default y | |
429 | ||
430 | source "drivers/pci/Kconfig" | |
431 | ||
432 | source "drivers/zorro/Kconfig" | |
433 | ||
434 | endmenu | |
435 | ||
d5950b43 SR |
436 | source "net/Kconfig" |
437 | ||
1da177e4 LT |
438 | source "drivers/Kconfig" |
439 | ||
440 | menu "Character devices" | |
441 | ||
442 | config ATARI_MFPSER | |
443 | tristate "Atari MFP serial support" | |
444 | depends on ATARI | |
445 | ---help--- | |
446 | If you like to use the MFP serial ports ("Modem1", "Serial1") under | |
447 | Linux, say Y. The driver equally supports all kinds of MFP serial | |
448 | ports and automatically detects whether Serial1 is available. | |
449 | ||
450 | To compile this driver as a module, choose M here. | |
451 | ||
452 | Note for Falcon users: You also have an MFP port, it's just not | |
453 | wired to the outside... But you could use the port under Linux. | |
454 | ||
455 | config ATARI_SCC | |
456 | tristate "Atari SCC serial support" | |
457 | depends on ATARI | |
458 | ---help--- | |
459 | If you have serial ports based on a Zilog SCC chip (Modem2, Serial2, | |
460 | LAN) and like to use them under Linux, say Y. All built-in SCC's are | |
461 | supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have | |
462 | two connectors for channel A (Serial2 and LAN), they are visible as | |
463 | two separate devices. | |
464 | ||
465 | To compile this driver as a module, choose M here. | |
466 | ||
467 | config ATARI_SCC_DMA | |
468 | bool "Atari SCC serial DMA support" | |
469 | depends on ATARI_SCC | |
470 | help | |
471 | This enables DMA support for receiving data on channel A of the SCC. | |
472 | If you have a TT you may say Y here and read | |
473 | drivers/char/atari_SCC.README. All other users should say N here, | |
474 | because only the TT has SCC-DMA, even if your machine keeps claiming | |
475 | so at boot time. | |
476 | ||
477 | config ATARI_MIDI | |
478 | tristate "Atari MIDI serial support" | |
479 | depends on ATARI | |
480 | help | |
481 | If you want to use your Atari's MIDI port in Linux, say Y. | |
482 | ||
483 | To compile this driver as a module, choose M here. | |
484 | ||
485 | config ATARI_DSP56K | |
486 | tristate "Atari DSP56k support (EXPERIMENTAL)" | |
487 | depends on ATARI && EXPERIMENTAL | |
488 | help | |
489 | If you want to be able to use the DSP56001 in Falcons, say Y. This | |
490 | driver is still experimental, and if you don't know what it is, or | |
491 | if you don't have this processor, just say N. | |
492 | ||
493 | To compile this driver as a module, choose M here. | |
494 | ||
495 | config AMIGA_BUILTIN_SERIAL | |
496 | tristate "Amiga builtin serial support" | |
497 | depends on AMIGA | |
498 | help | |
499 | If you want to use your Amiga's built-in serial port in Linux, | |
500 | answer Y. | |
501 | ||
502 | To compile this driver as a module, choose M here. | |
503 | ||
504 | config WHIPPET_SERIAL | |
505 | tristate "Hisoft Whippet PCMCIA serial support" | |
506 | depends on AMIGA_PCMCIA | |
507 | help | |
508 | HiSoft has a web page at <http://www.hisoft.co.uk/>, but there | |
509 | is no listing for the Whippet in their Amiga section. | |
510 | ||
511 | config MULTIFACE_III_TTY | |
512 | tristate "Multiface Card III serial support" | |
513 | depends on AMIGA | |
514 | help | |
515 | If you want to use a Multiface III card's serial port in Linux, | |
516 | answer Y. | |
517 | ||
518 | To compile this driver as a module, choose M here. | |
519 | ||
520 | config GVPIOEXT | |
521 | tristate "GVP IO-Extender support" | |
522 | depends on PARPORT=n && ZORRO | |
523 | help | |
524 | If you want to use a GVP IO-Extender serial card in Linux, say Y. | |
525 | Otherwise, say N. | |
526 | ||
527 | config GVPIOEXT_LP | |
528 | tristate "GVP IO-Extender parallel printer support" | |
529 | depends on GVPIOEXT | |
530 | help | |
531 | Say Y to enable driving a printer from the parallel port on your | |
532 | GVP IO-Extender card, N otherwise. | |
533 | ||
534 | config GVPIOEXT_PLIP | |
535 | tristate "GVP IO-Extender PLIP support" | |
536 | depends on GVPIOEXT | |
537 | help | |
538 | Say Y to enable doing IP over the parallel port on your GVP | |
539 | IO-Extender card, N otherwise. | |
540 | ||
541 | config MAC_SCC | |
542 | tristate "Macintosh serial support" | |
543 | depends on MAC | |
544 | ||
545 | config MAC_HID | |
546 | bool | |
547 | depends on INPUT_ADBHID | |
548 | default y | |
549 | ||
550 | config MAC_ADBKEYCODES | |
551 | bool "Support for ADB raw keycodes" | |
552 | depends on INPUT_ADBHID | |
553 | help | |
554 | This provides support for sending raw ADB keycodes to console | |
555 | devices. This is the default up to 2.4.0, but in future this may be | |
556 | phased out in favor of generic Linux keycodes. If you say Y here, | |
557 | you can dynamically switch via the | |
558 | /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes | |
559 | sysctl and with the "keyboard_sends_linux_keycodes=" kernel | |
560 | argument. | |
561 | ||
562 | If unsure, say Y here. | |
563 | ||
564 | config ADB_KEYBOARD | |
565 | bool "Support for ADB keyboard (old driver)" | |
566 | depends on MAC && !INPUT_ADBHID | |
567 | help | |
568 | This option allows you to use an ADB keyboard attached to your | |
569 | machine. Note that this disables any other (ie. PS/2) keyboard | |
570 | support, even if your machine is physically capable of using both at | |
571 | the same time. | |
572 | ||
573 | If you use an ADB keyboard (4 pin connector), say Y here. | |
574 | If you use a PS/2 keyboard (6 pin connector), say N here. | |
575 | ||
576 | config HPDCA | |
577 | tristate "HP DCA serial support" | |
578 | depends on DIO && SERIAL_8250 | |
579 | help | |
580 | If you want to use the internal "DCA" serial ports on an HP300 | |
581 | machine, say Y here. | |
582 | ||
583 | config HPAPCI | |
584 | tristate "HP APCI serial support" | |
585 | depends on HP300 && SERIAL_8250 && EXPERIMENTAL | |
586 | help | |
587 | If you want to use the internal "APCI" serial ports on an HP400 | |
588 | machine, say Y here. | |
589 | ||
590 | config MVME147_SCC | |
591 | bool "SCC support for MVME147 serial ports" | |
592 | depends on MVME147 | |
593 | help | |
594 | This is the driver for the serial ports on the Motorola MVME147 | |
595 | boards. Everyone using one of these boards should say Y here. | |
596 | ||
597 | config SERIAL167 | |
598 | bool "CD2401 support for MVME166/7 serial ports" | |
599 | depends on MVME16x && BROKEN | |
600 | help | |
601 | This is the driver for the serial ports on the Motorola MVME166, | |
602 | 167, and 172 boards. Everyone using one of these boards should say | |
603 | Y here. | |
604 | ||
605 | config MVME162_SCC | |
606 | bool "SCC support for MVME162 serial ports" | |
607 | depends on MVME16x | |
608 | help | |
609 | This is the driver for the serial ports on the Motorola MVME162 and | |
610 | 172 boards. Everyone using one of these boards should say Y here. | |
611 | ||
612 | config BVME6000_SCC | |
613 | bool "SCC support for BVME6000 serial ports" | |
614 | depends on BVME6000 | |
615 | help | |
616 | This is the driver for the serial ports on the BVME4000 and BVME6000 | |
617 | boards from BVM Ltd. Everyone using one of these boards should say | |
618 | Y here. | |
619 | ||
620 | config DN_SERIAL | |
621 | bool "Support for DN serial port (dummy)" | |
622 | depends on APOLLO | |
623 | ||
624 | config SERIAL_CONSOLE | |
625 | bool "Support for serial port console" | |
626 | depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) | |
627 | ---help--- | |
628 | If you say Y here, it will be possible to use a serial port as the | |
629 | system console (the system console is the device which receives all | |
630 | kernel messages and warnings and which allows logins in single user | |
631 | mode). This could be useful if some terminal or printer is connected | |
632 | to that serial port. | |
633 | ||
634 | Even if you say Y here, the currently visible virtual console | |
635 | (/dev/tty0) will still be used as the system console by default, but | |
636 | you can alter that using a kernel command line option such as | |
637 | "console=ttyS1". (Try "man bootparam" or see the documentation of | |
638 | your boot loader (lilo or loadlin) about how to pass options to the | |
639 | kernel at boot time.) | |
640 | ||
641 | If you don't have a VGA card installed and you say Y here, the | |
642 | kernel will automatically use the first serial line, /dev/ttyS0, as | |
643 | system console. | |
644 | ||
645 | If unsure, say N. | |
646 | ||
647 | endmenu | |
648 | ||
649 | source "fs/Kconfig" | |
650 | ||
651 | source "arch/m68k/Kconfig.debug" | |
652 | ||
653 | source "security/Kconfig" | |
654 | ||
655 | source "crypto/Kconfig" | |
656 | ||
657 | source "lib/Kconfig" |