]>
Commit | Line | Data |
---|---|---|
04e037aa SK |
1 | /****************************************************************************/ |
2 | ||
3 | /* | |
4 | * m525xsim.h -- ColdFire 525x System Integration Module support. | |
5 | * | |
6 | * (C) Copyright 2012, Steven king <sfking@fdwdc.com> | |
7 | * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) | |
8 | */ | |
9 | ||
10 | /****************************************************************************/ | |
11 | #ifndef m525xsim_h | |
12 | #define m525xsim_h | |
13 | /****************************************************************************/ | |
14 | ||
5a4acf3e GU |
15 | /* |
16 | * This header supports ColdFire 5249, 5251 and 5253. There are a few | |
17 | * little differences between them, but most of the peripheral support | |
18 | * can be used by all of them. | |
19 | */ | |
04e037aa SK |
20 | #define CPU_NAME "COLDFIRE(m525x)" |
21 | #define CPU_INSTR_PER_JIFFY 3 | |
22 | #define MCF_BUSCLK (MCF_CLK / 2) | |
23 | ||
24 | #include <asm/m52xxacr.h> | |
25 | ||
26 | /* | |
27 | * The 525x has a second MBAR region, define its address. | |
28 | */ | |
29 | #define MCF_MBAR2 0x80000000 | |
30 | ||
31 | /* | |
32 | * Define the 525x SIM register set addresses. | |
33 | */ | |
e1e362dc GU |
34 | #define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status */ |
35 | #define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */ | |
660b73e3 GU |
36 | #define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */ |
37 | #define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog srv */ | |
35142b91 | 38 | #define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */ |
6a3a786d GU |
39 | #define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pending */ |
40 | #define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */ | |
c986a3d5 GU |
41 | #define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */ |
42 | #define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */ | |
43 | #define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */ | |
44 | #define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */ | |
45 | #define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */ | |
46 | #define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */ | |
47 | #define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */ | |
48 | #define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */ | |
49 | #define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */ | |
50 | #define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */ | |
51 | #define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */ | |
52 | #define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */ | |
04e037aa | 53 | |
1419ea3b GU |
54 | #define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */ |
55 | #define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */ | |
56 | #define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */ | |
57 | #define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */ | |
58 | #define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */ | |
59 | #define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */ | |
60 | #define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */ | |
61 | #define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */ | |
62 | #define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */ | |
63 | #define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */ | |
64 | #define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */ | |
65 | #define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */ | |
66 | #define MCFSIM_CSAR4 (MCF_MBAR + 0xb0) /* CS 4 Address reg */ | |
67 | #define MCFSIM_CSMR4 (MCF_MBAR + 0xb4) /* CS 4 Mask reg */ | |
68 | #define MCFSIM_CSCR4 (MCF_MBAR + 0xba) /* CS 4 Control reg */ | |
04e037aa SK |
69 | |
70 | #define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ | |
71 | #define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ | |
72 | #define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */ | |
5a4acf3e GU |
73 | #define MCFSIM_DACR1 (MCF_MBAR + 0x110) /* DRAM 1 Addr/Ctrl */ |
74 | #define MCFSIM_DMR1 (MCF_MBAR + 0x114) /* DRAM 1 Mask */ | |
04e037aa SK |
75 | |
76 | /* | |
77 | * Secondary Interrupt Controller (in MBAR2) | |
78 | */ | |
79 | #define MCFINTC2_INTBASE (MCF_MBAR2 + 0x168) /* Base Vector Reg */ | |
80 | #define MCFINTC2_INTPRI1 (MCF_MBAR2 + 0x140) /* 0-7 priority */ | |
81 | #define MCFINTC2_INTPRI2 (MCF_MBAR2 + 0x144) /* 8-15 priority */ | |
82 | #define MCFINTC2_INTPRI3 (MCF_MBAR2 + 0x148) /* 16-23 priority */ | |
83 | #define MCFINTC2_INTPRI4 (MCF_MBAR2 + 0x14c) /* 24-31 priority */ | |
84 | #define MCFINTC2_INTPRI5 (MCF_MBAR2 + 0x150) /* 32-39 priority */ | |
85 | #define MCFINTC2_INTPRI6 (MCF_MBAR2 + 0x154) /* 40-47 priority */ | |
86 | #define MCFINTC2_INTPRI7 (MCF_MBAR2 + 0x158) /* 48-55 priority */ | |
87 | #define MCFINTC2_INTPRI8 (MCF_MBAR2 + 0x15c) /* 56-63 priority */ | |
88 | ||
89 | #define MCFINTC2_INTPRI_REG(i) (MCFINTC2_INTPRI1 + \ | |
90 | ((((i) - MCFINTC2_VECBASE) / 8) * 4)) | |
91 | #define MCFINTC2_INTPRI_BITS(b, i) ((b) << (((i) % 8) * 4)) | |
92 | ||
93 | /* | |
94 | * Timer module. | |
95 | */ | |
96 | #define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ | |
97 | #define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ | |
98 | ||
99 | /* | |
100 | * UART module. | |
101 | */ | |
102 | #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ | |
103 | #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ | |
104 | ||
105 | /* | |
106 | * QSPI module. | |
107 | */ | |
e93e91f2 | 108 | #define MCFQSPI_BASE (MCF_MBAR + 0x400) /* Base address QSPI */ |
04e037aa SK |
109 | #define MCFQSPI_SIZE 0x40 /* Register set size */ |
110 | ||
5a4acf3e GU |
111 | #ifdef CONFIG_M5249 |
112 | #define MCFQSPI_CS0 29 | |
113 | #define MCFQSPI_CS1 24 | |
114 | #define MCFQSPI_CS2 21 | |
115 | #define MCFQSPI_CS3 22 | |
116 | #else | |
04e037aa SK |
117 | #define MCFQSPI_CS0 15 |
118 | #define MCFQSPI_CS1 16 | |
119 | #define MCFQSPI_CS2 24 | |
120 | #define MCFQSPI_CS3 28 | |
5a4acf3e | 121 | #endif |
04e037aa SK |
122 | |
123 | /* | |
124 | * I2C module. | |
125 | */ | |
126 | #define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base addreess I2C0 */ | |
127 | #define MCFI2C_SIZE0 0x20 /* Register set size */ | |
128 | ||
129 | #define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */ | |
130 | #define MCFI2C_SIZE1 0x20 /* Register set size */ | |
5a4acf3e | 131 | |
04e037aa SK |
132 | /* |
133 | * DMA unit base addresses. | |
134 | */ | |
135 | #define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */ | |
136 | #define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */ | |
137 | #define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */ | |
138 | #define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */ | |
139 | ||
140 | /* | |
141 | * Some symbol defines for the above... | |
142 | */ | |
143 | #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ | |
144 | #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ | |
145 | #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ | |
146 | #define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */ | |
147 | #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ | |
148 | #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ | |
149 | #define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ | |
150 | #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ | |
151 | #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ | |
152 | #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ | |
153 | #define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */ | |
154 | ||
155 | /* | |
156 | * Define system peripheral IRQ usage. | |
157 | */ | |
158 | #define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */ | |
159 | #define MCF_IRQ_I2C0 29 | |
160 | #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ | |
161 | #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ | |
162 | ||
163 | #define MCF_IRQ_UART0 73 /* UART0 */ | |
164 | #define MCF_IRQ_UART1 74 /* UART1 */ | |
165 | ||
166 | /* | |
167 | * Define the base interrupt for the second interrupt controller. | |
168 | * We set it to 128, out of the way of the base interrupts, and plenty | |
169 | * of room for its 64 interrupts. | |
170 | */ | |
171 | #define MCFINTC2_VECBASE 128 | |
172 | ||
173 | #define MCF_IRQ_GPIO0 (MCFINTC2_VECBASE + 32) | |
174 | #define MCF_IRQ_GPIO1 (MCFINTC2_VECBASE + 33) | |
175 | #define MCF_IRQ_GPIO2 (MCFINTC2_VECBASE + 34) | |
176 | #define MCF_IRQ_GPIO3 (MCFINTC2_VECBASE + 35) | |
177 | #define MCF_IRQ_GPIO4 (MCFINTC2_VECBASE + 36) | |
178 | #define MCF_IRQ_GPIO5 (MCFINTC2_VECBASE + 37) | |
179 | #define MCF_IRQ_GPIO6 (MCFINTC2_VECBASE + 38) | |
5a4acf3e | 180 | #define MCF_IRQ_GPIO7 (MCFINTC2_VECBASE + 39) |
04e037aa SK |
181 | |
182 | #define MCF_IRQ_USBWUP (MCFINTC2_VECBASE + 40) | |
183 | #define MCF_IRQ_I2C1 (MCFINTC2_VECBASE + 62) | |
184 | ||
185 | /* | |
186 | * General purpose IO registers (in MBAR2). | |
187 | */ | |
188 | #define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */ | |
189 | #define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */ | |
190 | #define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */ | |
191 | #define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */ | |
192 | #define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */ | |
193 | #define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */ | |
194 | #define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */ | |
195 | #define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */ | |
196 | ||
197 | #define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr status */ | |
198 | #define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */ | |
199 | #define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */ | |
200 | ||
5a4acf3e GU |
201 | #define MCFSIM2_DMAROUTE (MCF_MBAR2 + 0x188) /* DMA routing */ |
202 | #define MCFSIM2_IDECONFIG1 (MCF_MBAR2 + 0x18c) /* IDEconfig1 */ | |
203 | #define MCFSIM2_IDECONFIG2 (MCF_MBAR2 + 0x190) /* IDEconfig2 */ | |
204 | ||
04e037aa SK |
205 | /* |
206 | * Generic GPIO support | |
207 | */ | |
208 | #define MCFGPIO_PIN_MAX 64 | |
5a4acf3e GU |
209 | #ifdef CONFIG_M5249 |
210 | #define MCFGPIO_IRQ_MAX -1 | |
211 | #define MCFGPIO_IRQ_VECBASE -1 | |
212 | #else | |
04e037aa SK |
213 | #define MCFGPIO_IRQ_MAX 7 |
214 | #define MCFGPIO_IRQ_VECBASE MCF_IRQ_GPIO0 | |
5a4acf3e GU |
215 | #endif |
216 | ||
217 | /****************************************************************************/ | |
218 | ||
219 | #ifdef __ASSEMBLER__ | |
220 | #ifdef CONFIG_M5249C3 | |
221 | /* | |
222 | * The M5249C3 board needs a little help getting all its SIM devices | |
223 | * initialized at kernel start time. dBUG doesn't set much up, so | |
224 | * we need to do it manually. | |
225 | */ | |
226 | .macro m5249c3_setup | |
227 | /* | |
228 | * Set MBAR1 and MBAR2, just incase they are not set. | |
229 | */ | |
230 | movel #0x10000001,%a0 | |
231 | movec %a0,%MBAR /* map MBAR region */ | |
232 | subql #1,%a0 /* get MBAR address in a0 */ | |
233 | ||
234 | movel #0x80000001,%a1 | |
235 | movec %a1,#3086 /* map MBAR2 region */ | |
236 | subql #1,%a1 /* get MBAR2 address in a1 */ | |
237 | ||
238 | /* | |
239 | * Move secondary interrupts to their base (128). | |
240 | */ | |
241 | moveb #MCFINTC2_VECBASE,%d0 | |
242 | moveb %d0,0x16b(%a1) /* interrupt base register */ | |
243 | ||
244 | /* | |
245 | * Work around broken CSMR0/DRAM vector problem. | |
246 | */ | |
247 | movel #0x001F0021,%d0 /* disable C/I bit */ | |
248 | movel %d0,0x84(%a0) /* set CSMR0 */ | |
249 | ||
250 | /* | |
251 | * Disable the PLL firstly. (Who knows what state it is | |
252 | * in here!). | |
253 | */ | |
254 | movel 0x180(%a1),%d0 /* get current PLL value */ | |
255 | andl #0xfffffffe,%d0 /* PLL bypass first */ | |
256 | movel %d0,0x180(%a1) /* set PLL register */ | |
257 | nop | |
258 | ||
259 | #if CONFIG_CLOCK_FREQ == 140000000 | |
260 | /* | |
261 | * Set initial clock frequency. This assumes M5249C3 board | |
262 | * is fitted with 11.2896MHz crystal. It will program the | |
263 | * PLL for 140MHz. Lets go fast :-) | |
264 | */ | |
265 | movel #0x125a40f0,%d0 /* set for 140MHz */ | |
266 | movel %d0,0x180(%a1) /* set PLL register */ | |
267 | orl #0x1,%d0 | |
268 | movel %d0,0x180(%a1) /* set PLL register */ | |
269 | #endif | |
270 | ||
271 | /* | |
272 | * Setup CS1 for ethernet controller. | |
273 | * (Setup as per M5249C3 doco). | |
274 | */ | |
275 | movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */ | |
276 | movel %d0,0x8c(%a0) | |
277 | movel #0x001f0021,%d0 /* CS1 size of 1Mb */ | |
278 | movel %d0,0x90(%a0) | |
279 | movew #0x0080,%d0 /* CS1 = 16bit port, AA */ | |
280 | movew %d0,0x96(%a0) | |
281 | ||
282 | /* | |
283 | * Setup CS2 for IDE interface. | |
284 | */ | |
285 | movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */ | |
286 | movel %d0,0x98(%a0) | |
287 | movel #0x001f0001,%d0 /* CS2 size of 1MB */ | |
288 | movel %d0,0x9c(%a0) | |
289 | movew #0x0080,%d0 /* CS2 = 16bit, TA */ | |
290 | movew %d0,0xa2(%a0) | |
291 | ||
292 | movel #0x00107000,%d0 /* IDEconfig1 */ | |
293 | movel %d0,0x18c(%a1) | |
294 | movel #0x000c0400,%d0 /* IDEconfig2 */ | |
295 | movel %d0,0x190(%a1) | |
296 | ||
297 | movel #0x00080000,%d0 /* GPIO19, IDE reset bit */ | |
298 | orl %d0,0xc(%a1) /* function GPIO19 */ | |
299 | orl %d0,0x8(%a1) /* enable GPIO19 as output */ | |
300 | orl %d0,0x4(%a1) /* de-assert IDE reset */ | |
301 | .endm | |
302 | ||
303 | #define PLATFORM_SETUP m5249c3_setup | |
04e037aa | 304 | |
5a4acf3e GU |
305 | #endif /* CONFIG_M5249C3 */ |
306 | #endif /* __ASSEMBLER__ */ | |
04e037aa SK |
307 | /****************************************************************************/ |
308 | #endif /* m525xsim_h */ |