[mirror_ubuntu-artful-kernel.git] / arch / mips / boot / dts / brcm / bcm7420.dtsi

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "brcm,bcm7420";

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		mips-hpt-frequency = <93750000>;

		cpu@0 {
			compatible = "brcm,bmips5000";
			device_type = "cpu";
			reg = <0>;
		};

		cpu@1 {
			compatible = "brcm,bmips5000";
			device_type = "cpu";
			reg = <1>;
		};
	};

	aliases {
		uart0 = &uart0;
	};

	cpu_intc: cpu_intc {
		#address-cells = <0>;
		compatible = "mti,cpu-interrupt-controller";

		interrupt-controller;
		#interrupt-cells = <1>;
	};

	clocks {
		uart_clk: uart_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <81000000>;
		};

		upg_clk: upg_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <27000000>;
		};
	};

	rdb {
		#address-cells = <1>;
		#size-cells = <1>;

		compatible = "simple-bus";
		ranges = <0 0x10000000 0x01000000>;

		periph_intc: periph_intc@441400 {
			compatible = "brcm,bcm7038-l1-intc";
			reg = <0x441400 0x30>, <0x441600 0x30>;

			interrupt-controller;
			#interrupt-cells = <1>;

			interrupt-parent = <&cpu_intc>;
			interrupts = <2>, <3>;
		};

		sun_l2_intc: sun_l2_intc@401800 {
			compatible = "brcm,l2-intc";
			reg = <0x401800 0x30>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupt-parent = <&periph_intc>;
			interrupts = <23>;
		};

		gisb-arb@400000 {
			compatible = "brcm,bcm7400-gisb-arb";
			reg = <0x400000 0xdc>;
			native-endian;
			interrupt-parent = <&sun_l2_intc>;
			interrupts = <0>, <2>;
			brcm,gisb-arb-master-mask = <0x3ff>;
			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
						     "pcie_0", "bsp_0", "rdc_0",
						     "rptd_0", "avd_0", "avd_1",
						     "jtag_0";
		};

		upg_irq0_intc: upg_irq0_intc@406780 {
			compatible = "brcm,bcm7120-l2-intc";
			reg = <0x406780 0x8>;

			brcm,int-map-mask = <0x44>, <0x1f000000>;
			brcm,int-fwd-mask = <0x70000>;

			interrupt-controller;
			#interrupt-cells = <1>;

			interrupt-parent = <&periph_intc>;
			interrupts = <18>, <19>;
			interrupt-names = "upg_main", "upg_bsc";
		};

		sun_top_ctrl: syscon@404000 {
			compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
			reg = <0x404000 0x60c>;
			native-endian;
		};

		reboot {
			compatible = "brcm,bcm7038-reboot";
			syscon = <&sun_top_ctrl 0x8 0x14>;
		};

		uart0: serial@406b00 {
			compatible = "ns16550a";
			reg = <0x406b00 0x20>;
			reg-io-width = <0x4>;
			reg-shift = <0x2>;
			interrupt-parent = <&periph_intc>;
			interrupts = <21>;
			clocks = <&uart_clk>;
			status = "disabled";
		};

		uart1: serial@406b40 {
			compatible = "ns16550a";
			reg = <0x406b40 0x20>;
			reg-io-width = <0x4>;
			reg-shift = <0x2>;
			interrupt-parent = <&periph_intc>;
			interrupts = <64>;
			clocks = <&uart_clk>;
			status = "disabled";
		};

		uart2: serial@406b80 {
			compatible = "ns16550a";
			reg = <0x406b80 0x20>;
			reg-io-width = <0x4>;
			reg-shift = <0x2>;
			interrupt-parent = <&periph_intc>;
			interrupts = <65>;
			clocks = <&uart_clk>;
			status = "disabled";
		};

		bsca: i2c@406200 {
		      clock-frequency = <390000>;
		      compatible = "brcm,brcmstb-i2c";
		      interrupt-parent = <&upg_irq0_intc>;
		      reg = <0x406200 0x58>;
		      interrupts = <24>;
		      interrupt-names = "upg_bsca";
		      status = "disabled";
		};

		bscb: i2c@406280 {
		      clock-frequency = <390000>;
		      compatible = "brcm,brcmstb-i2c";
		      interrupt-parent = <&upg_irq0_intc>;
		      reg = <0x406280 0x58>;
		      interrupts = <25>;
		      interrupt-names = "upg_bscb";
		      status = "disabled";
		};

		bscc: i2c@406300 {
		      clock-frequency = <390000>;
		      compatible = "brcm,brcmstb-i2c";
		      interrupt-parent = <&upg_irq0_intc>;
		      reg = <0x406300 0x58>;
		      interrupts = <26>;
		      interrupt-names = "upg_bscc";
		      status = "disabled";
		};

		bscd: i2c@406380 {
		      clock-frequency = <390000>;
		      compatible = "brcm,brcmstb-i2c";
		      interrupt-parent = <&upg_irq0_intc>;
		      reg = <0x406380 0x58>;
		      interrupts = <27>;
		      interrupt-names = "upg_bscd";
		      status = "disabled";
		};

		bsce: i2c@406800 {
		      clock-frequency = <390000>;
		      compatible = "brcm,brcmstb-i2c";
		      interrupt-parent = <&upg_irq0_intc>;
		      reg = <0x406800 0x58>;
		      interrupts = <28>;
		      interrupt-names = "upg_bsce";
		      status = "disabled";
		};

		pwma: pwm@406580 {
			compatible = "brcm,bcm7038-pwm";
			reg = <0x406580 0x28>;
			#pwm-cells = <2>;
			clocks = <&upg_clk>;
			status = "disabled";
		};

		pwmb: pwm@406880 {
			compatible = "brcm,bcm7038-pwm";
			reg = <0x406880 0x28>;
			#pwm-cells = <2>;
			clocks = <&upg_clk>;
			status = "disabled";
		};

		enet0: ethernet@468000 {
			phy-mode = "internal";
			phy-handle = <&phy1>;
			mac-address = [ 00 10 18 36 23 1a ];
			compatible = "brcm,genet-v1";
			#address-cells = <0x1>;
			#size-cells = <0x1>;
			reg = <0x468000 0x3c8c>;
			interrupts = <69>, <79>;
			interrupt-parent = <&periph_intc>;
			status = "disabled";

			mdio@e14 {
				compatible = "brcm,genet-mdio-v1";
				#address-cells = <0x1>;
				#size-cells = <0x0>;
				reg = <0xe14 0x8>;

				phy1: ethernet-phy@1 {
					max-speed = <100>;
					reg = <0x1>;
					compatible = "brcm,65nm-ephy",
						"ethernet-phy-ieee802.3-c22";
				};
			};
		};

		ehci0: usb@488300 {
			compatible = "brcm,bcm7420-ehci", "generic-ehci";
			reg = <0x488300 0x100>;
			interrupt-parent = <&periph_intc>;
			interrupts = <60>;
			status = "disabled";
		};

		ohci0: usb@488400 {
			compatible = "brcm,bcm7420-ohci", "generic-ohci";
			reg = <0x488400 0x100>;
			native-endian;
			no-big-frame-no;
			interrupt-parent = <&periph_intc>;
			interrupts = <61>;
			status = "disabled";
		};

		ehci1: usb@488500 {
			compatible = "brcm,bcm7420-ehci", "generic-ehci";
			reg = <0x488500 0x100>;
			interrupt-parent = <&periph_intc>;
			interrupts = <55>;
			status = "disabled";
		};

		ohci1: usb@488600 {
			compatible = "brcm,bcm7420-ohci", "generic-ohci";
			reg = <0x488600 0x100>;
			native-endian;
			no-big-frame-no;
			interrupt-parent = <&periph_intc>;
			interrupts = <62>;
			status = "disabled";
		};
	};
};
Commit	Line	Data
8945e37e KC	1	/ {
	2	#address-cells = <1>;
	3	#size-cells = <1>;
	4	compatible = "brcm,bcm7420";
	5
	6	cpus {
	7	#address-cells = <1>;
	8	#size-cells = <0>;
	9
	10	mips-hpt-frequency = <93750000>;
	11
	12	cpu@0 {
	13	compatible = "brcm,bmips5000";
	14	device_type = "cpu";
	15	reg = <0>;
	16	};
	17
	18	cpu@1 {
	19	compatible = "brcm,bmips5000";
	20	device_type = "cpu";
	21	reg = <1>;
	22	};
	23	};
	24
	25	aliases {
	26	uart0 = &uart0;
	27	};
	28
	29	cpu_intc: cpu_intc {
	30	#address-cells = <0>;
	31	compatible = "mti,cpu-interrupt-controller";
	32
	33	interrupt-controller;
	34	#interrupt-cells = <1>;
	35	};
	36
	37	clocks {
	38	uart_clk: uart_clk {
	39	compatible = "fixed-clock";
	40	#clock-cells = <0>;
	41	clock-frequency = <81000000>;
	42	};
7bbe59dd JS	43
	44	upg_clk: upg_clk {
	45	compatible = "fixed-clock";
	46	#clock-cells = <0>;
	47	clock-frequency = <27000000>;
	48	};
8945e37e KC	49	};
	50
	51	rdb {
	52	#address-cells = <1>;
	53	#size-cells = <1>;
	54
	55	compatible = "simple-bus";
	56	ranges = <0 0x10000000 0x01000000>;
	57
	58	periph_intc: periph_intc@441400 {
	59	compatible = "brcm,bcm7038-l1-intc";
	60	reg = <0x441400 0x30>, <0x441600 0x30>;
	61
	62	interrupt-controller;
	63	#interrupt-cells = <1>;
	64
	65	interrupt-parent = <&cpu_intc>;
	66	interrupts = <2>, <3>;
	67	};
	68
	69	sun_l2_intc: sun_l2_intc@401800 {
	70	compatible = "brcm,l2-intc";
	71	reg = <0x401800 0x30>;
	72	interrupt-controller;
	73	#interrupt-cells = <1>;
	74	interrupt-parent = <&periph_intc>;
	75	interrupts = <23>;
	76	};
	77
	78	gisb-arb@400000 {
	79	compatible = "brcm,bcm7400-gisb-arb";
	80	reg = <0x400000 0xdc>;
	81	native-endian;
	82	interrupt-parent = <&sun_l2_intc>;
	83	interrupts = <0>, <2>;
	84	brcm,gisb-arb-master-mask = <0x3ff>;
	85	brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
	86	"pcie_0", "bsp_0", "rdc_0",
	87	"rptd_0", "avd_0", "avd_1",
	88	"jtag_0";
	89	};
	90
	91	upg_irq0_intc: upg_irq0_intc@406780 {
	92	compatible = "brcm,bcm7120-l2-intc";
	93	reg = <0x406780 0x8>;
	94
5c40d493	95	brcm,int-map-mask = <0x44>, <0x1f000000>;
8945e37e KC	96	brcm,int-fwd-mask = <0x70000>;
	97
	98	interrupt-controller;
	99	#interrupt-cells = <1>;
	100
	101	interrupt-parent = <&periph_intc>;
5c40d493 JS	102	interrupts = <18>, <19>;
5c40d493 JS	103	interrupt-names = "upg_main", "upg_bsc";
8945e37e KC	104	};
	105
	106	sun_top_ctrl: syscon@404000 {
	107	compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
	108	reg = <0x404000 0x60c>;
25d6463e	109	native-endian;
8945e37e KC	110	};
	111
	112	reboot {
	113	compatible = "brcm,bcm7038-reboot";
	114	syscon = <&sun_top_ctrl 0x8 0x14>;
	115	};
	116
	117	uart0: serial@406b00 {
	118	compatible = "ns16550a";
	119	reg = <0x406b00 0x20>;
	120	reg-io-width = <0x4>;
	121	reg-shift = <0x2>;
	122	interrupt-parent = <&periph_intc>;
	123	interrupts = <21>;
	124	clocks = <&uart_clk>;
	125	status = "disabled";
	126	};
	127
5c40d493 JS	128	uart1: serial@406b40 {
	129	compatible = "ns16550a";
	130	reg = <0x406b40 0x20>;
	131	reg-io-width = <0x4>;
	132	reg-shift = <0x2>;
	133	interrupt-parent = <&periph_intc>;
	134	interrupts = <64>;
	135	clocks = <&uart_clk>;
	136	status = "disabled";
	137	};
	138
	139	uart2: serial@406b80 {
	140	compatible = "ns16550a";
	141	reg = <0x406b80 0x20>;
	142	reg-io-width = <0x4>;
	143	reg-shift = <0x2>;
	144	interrupt-parent = <&periph_intc>;
	145	interrupts = <65>;
	146	clocks = <&uart_clk>;
	147	status = "disabled";
	148	};
	149
	150	bsca: i2c@406200 {
	151	clock-frequency = <390000>;
	152	compatible = "brcm,brcmstb-i2c";
	153	interrupt-parent = <&upg_irq0_intc>;
	154	reg = <0x406200 0x58>;
	155	interrupts = <24>;
	156	interrupt-names = "upg_bsca";
	157	status = "disabled";
	158	};
	159
	160	bscb: i2c@406280 {
	161	clock-frequency = <390000>;
	162	compatible = "brcm,brcmstb-i2c";
	163	interrupt-parent = <&upg_irq0_intc>;
	164	reg = <0x406280 0x58>;
	165	interrupts = <25>;
	166	interrupt-names = "upg_bscb";
	167	status = "disabled";
	168	};
	169
	170	bscc: i2c@406300 {
	171	clock-frequency = <390000>;
	172	compatible = "brcm,brcmstb-i2c";
	173	interrupt-parent = <&upg_irq0_intc>;
	174	reg = <0x406300 0x58>;
	175	interrupts = <26>;
	176	interrupt-names = "upg_bscc";
	177	status = "disabled";
	178	};
	179
	180	bscd: i2c@406380 {
	181	clock-frequency = <390000>;
	182	compatible = "brcm,brcmstb-i2c";
	183	interrupt-parent = <&upg_irq0_intc>;
	184	reg = <0x406380 0x58>;
	185	interrupts = <27>;
	186	interrupt-names = "upg_bscd";
	187	status = "disabled";
	188	};
	189
	190	bsce: i2c@406800 {
	191	clock-frequency = <390000>;
192	compatible = "brcm,brcmstb-i2c";
193	interrupt-parent = <&upg_irq0_intc>;
194	reg = <0x406800 0x58>;
195	interrupts = <28>;
196	interrupt-names = "upg_bsce";
197	status = "disabled";
198	};
199
7bbe59dd JS	200	pwma: pwm@406580 {
	201	compatible = "brcm,bcm7038-pwm";
	202	reg = <0x406580 0x28>;
	203	#pwm-cells = <2>;
	204	clocks = <&upg_clk>;
	205	status = "disabled";
	206	};
	207
	208	pwmb: pwm@406880 {
	209	compatible = "brcm,bcm7038-pwm";
	210	reg = <0x406880 0x28>;
	211	#pwm-cells = <2>;
	212	clocks = <&upg_clk>;
	213	status = "disabled";
	214	};
	215
8945e37e KC	216	enet0: ethernet@468000 {
	217	phy-mode = "internal";
	218	phy-handle = <&phy1>;
	219	mac-address = [ 00 10 18 36 23 1a ];
	220	compatible = "brcm,genet-v1";
	221	#address-cells = <0x1>;
	222	#size-cells = <0x1>;
	223	reg = <0x468000 0x3c8c>;
	224	interrupts = <69>, <79>;
	225	interrupt-parent = <&periph_intc>;
	226	status = "disabled";
	227
	228	mdio@e14 {
	229	compatible = "brcm,genet-mdio-v1";
	230	#address-cells = <0x1>;
	231	#size-cells = <0x0>;
	232	reg = <0xe14 0x8>;
	233
	234	phy1: ethernet-phy@1 {
	235	max-speed = <100>;
	236	reg = <0x1>;
	237	compatible = "brcm,65nm-ephy",
	238	"ethernet-phy-ieee802.3-c22";
	239	};
	240	};
	241	};
	242
	243	ehci0: usb@488300 {
	244	compatible = "brcm,bcm7420-ehci", "generic-ehci";
	245	reg = <0x488300 0x100>;
	246	interrupt-parent = <&periph_intc>;
	247	interrupts = <60>;
	248	status = "disabled";
	249	};
	250
	251	ohci0: usb@488400 {
	252	compatible = "brcm,bcm7420-ohci", "generic-ohci";
	253	reg = <0x488400 0x100>;
	254	native-endian;
	255	no-big-frame-no;
	256	interrupt-parent = <&periph_intc>;
	257	interrupts = <61>;
	258	status = "disabled";
	259	};
	260
	261	ehci1: usb@488500 {
	262	compatible = "brcm,bcm7420-ehci", "generic-ehci";
	263	reg = <0x488500 0x100>;
	264	interrupt-parent = <&periph_intc>;
	265	interrupts = <55>;
	266	status = "disabled";
	267	};
	268
	269	ohci1: usb@488600 {
	270	compatible = "brcm,bcm7420-ohci", "generic-ohci";
	271	reg = <0x488600 0x100>;
	272	native-endian;
	273	no-big-frame-no;
	274	interrupt-parent = <&periph_intc>;
	275	interrupts = <62>;
	276	status = "disabled";
	277	};
	278	};
	279	};