projects / mirror_ubuntu-artful-kernel.git / blame
| Commit | Line | Data |
|---|---|---|
| 8945e37e KC |
1 | / { |
| 2 | #address-cells = <1>; | |
| 3 | #size-cells = <1>; | |
| 4 | compatible = "brcm,bcm7420"; | |
| 5 | ||
| 6 | cpus { | |
| 7 | #address-cells = <1>; | |
| 8 | #size-cells = <0>; | |
| 9 | ||
| 10 | mips-hpt-frequency = <93750000>; | |
| 11 | ||
| 12 | cpu@0 { | |
| 13 | compatible = "brcm,bmips5000"; | |
| 14 | device_type = "cpu"; | |
| 15 | reg = <0>; | |
| 16 | }; | |
| 17 | ||
| 18 | cpu@1 { | |
| 19 | compatible = "brcm,bmips5000"; | |
| 20 | device_type = "cpu"; | |
| 21 | reg = <1>; | |
| 22 | }; | |
| 23 | }; | |
| 24 | ||
| 25 | aliases { | |
| 26 | uart0 = &uart0; | |
| 27 | }; | |
| 28 | ||
| 29 | cpu_intc: cpu_intc { | |
| 30 | #address-cells = <0>; | |
| 31 | compatible = "mti,cpu-interrupt-controller"; | |
| 32 | ||
| 33 | interrupt-controller; | |
| 34 | #interrupt-cells = <1>; | |
| 35 | }; | |
| 36 | ||
| 37 | clocks { | |
| 38 | uart_clk: uart_clk { | |
| 39 | compatible = "fixed-clock"; | |
| 40 | #clock-cells = <0>; | |
| 41 | clock-frequency = <81000000>; | |
| 42 | }; | |
| 43 | }; | |
| 44 | ||
| 45 | rdb { | |
| 46 | #address-cells = <1>; | |
| 47 | #size-cells = <1>; | |
| 48 | ||
| 49 | compatible = "simple-bus"; | |
| 50 | ranges = <0 0x10000000 0x01000000>; | |
| 51 | ||
| 52 | periph_intc: periph_intc@441400 { | |
| 53 | compatible = "brcm,bcm7038-l1-intc"; | |
| 54 | reg = <0x441400 0x30>, <0x441600 0x30>; | |
| 55 | ||
| 56 | interrupt-controller; | |
| 57 | #interrupt-cells = <1>; | |
| 58 | ||
| 59 | interrupt-parent = <&cpu_intc>; | |
| 60 | interrupts = <2>, <3>; | |
| 61 | }; | |
| 62 | ||
| 63 | sun_l2_intc: sun_l2_intc@401800 { | |
| 64 | compatible = "brcm,l2-intc"; | |
| 65 | reg = <0x401800 0x30>; | |
| 66 | interrupt-controller; | |
| 67 | #interrupt-cells = <1>; | |
| 68 | interrupt-parent = <&periph_intc>; | |
| 69 | interrupts = <23>; | |
| 70 | }; | |
| 71 | ||
| 72 | gisb-arb@400000 { | |
| 73 | compatible = "brcm,bcm7400-gisb-arb"; | |
| 74 | reg = <0x400000 0xdc>; | |
| 75 | native-endian; | |
| 76 | interrupt-parent = <&sun_l2_intc>; | |
| 77 | interrupts = <0>, <2>; | |
| 78 | brcm,gisb-arb-master-mask = <0x3ff>; | |
| 79 | brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", | |
| 80 | "pcie_0", "bsp_0", "rdc_0", | |
| 81 | "rptd_0", "avd_0", "avd_1", | |
| 82 | "jtag_0"; | |
| 83 | }; | |
| 84 | ||
| 85 | upg_irq0_intc: upg_irq0_intc@406780 { | |
| 86 | compatible = "brcm,bcm7120-l2-intc"; | |
| 87 | reg = <0x406780 0x8>; | |
| 88 | ||
| 89 | brcm,int-map-mask = <0x44>; | |
| 90 | brcm,int-fwd-mask = <0x70000>; | |
| 91 | ||
| 92 | interrupt-controller; | |
| 93 | #interrupt-cells = <1>; | |
| 94 | ||
| 95 | interrupt-parent = <&periph_intc>; | |
| 96 | interrupts = <18>; | |
| 97 | }; | |
| 98 | ||
| 99 | sun_top_ctrl: syscon@404000 { | |
| 100 | compatible = "brcm,bcm7420-sun-top-ctrl", "syscon"; | |
| 101 | reg = <0x404000 0x60c>; | |
| 8945e37e KC |
102 | }; |
| 103 | ||
| 104 | reboot { | |
| 105 | compatible = "brcm,bcm7038-reboot"; | |
| 106 | syscon = <&sun_top_ctrl 0x8 0x14>; | |
| 107 | }; | |
| 108 | ||
| 109 | uart0: serial@406b00 { | |
| 110 | compatible = "ns16550a"; | |
| 111 | reg = <0x406b00 0x20>; | |
| 112 | reg-io-width = <0x4>; | |
| 113 | reg-shift = <0x2>; | |
| 114 | interrupt-parent = <&periph_intc>; | |
| 115 | interrupts = <21>; | |
| 116 | clocks = <&uart_clk>; | |
| 117 | status = "disabled"; | |
| 118 | }; | |
| 119 | ||
| 120 | enet0: ethernet@468000 { | |
| 121 | phy-mode = "internal"; | |
| 122 | phy-handle = <&phy1>; | |
| 123 | mac-address = [ 00 10 18 36 23 1a ]; | |
| 124 | compatible = "brcm,genet-v1"; | |
| 125 | #address-cells = <0x1>; | |
| 126 | #size-cells = <0x1>; | |
| 127 | reg = <0x468000 0x3c8c>; | |
| 128 | interrupts = <69>, <79>; | |
| 129 | interrupt-parent = <&periph_intc>; | |
| 130 | status = "disabled"; | |
| 131 | ||
| 132 | mdio@e14 { | |
| 133 | compatible = "brcm,genet-mdio-v1"; | |
| 134 | #address-cells = <0x1>; | |
| 135 | #size-cells = <0x0>; | |
| 136 | reg = <0xe14 0x8>; | |
| 137 | ||
| 138 | phy1: ethernet-phy@1 { | |
| 139 | max-speed = <100>; | |
| 140 | reg = <0x1>; | |
| 141 | compatible = "brcm,65nm-ephy", | |
| 142 | "ethernet-phy-ieee802.3-c22"; | |
| 143 | }; | |
| 144 | }; | |
| 145 | }; | |
| 146 | ||
| 147 | ehci0: usb@488300 { | |
| 148 | compatible = "brcm,bcm7420-ehci", "generic-ehci"; | |
| 149 | reg = <0x488300 0x100>; | |
| 150 | interrupt-parent = <&periph_intc>; | |
| 151 | interrupts = <60>; | |
| 152 | status = "disabled"; | |
| 153 | }; | |
| 154 | ||
| 155 | ohci0: usb@488400 { | |
| 156 | compatible = "brcm,bcm7420-ohci", "generic-ohci"; | |
| 157 | reg = <0x488400 0x100>; | |
| 158 | native-endian; | |
| 159 | no-big-frame-no; | |
| 160 | interrupt-parent = <&periph_intc>; | |
| 161 | interrupts = <61>; | |
| 162 | status = "disabled"; | |
| 163 | }; | |
| 164 | ||
| 165 | ehci1: usb@488500 { | |
| 166 | compatible = "brcm,bcm7420-ehci", "generic-ehci"; | |
| 167 | reg = <0x488500 0x100>; | |
| 168 | interrupt-parent = <&periph_intc>; | |
| 169 | interrupts = <55>; | |
| 170 | status = "disabled"; | |
| 171 | }; | |
| 172 | ||
| 173 | ohci1: usb@488600 { | |
| 174 | compatible = "brcm,bcm7420-ohci", "generic-ohci"; | |
| 175 | reg = <0x488600 0x100>; | |
| 176 | native-endian; | |
| 177 | no-big-frame-no; | |
| 178 | interrupt-parent = <&periph_intc>; | |
| 179 | interrupts = <62>; | |
| 180 | status = "disabled"; | |
| 181 | }; | |
| 182 | }; | |
| 183 | }; |