]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Processor capabilities determination functions. | |
3 | * | |
4 | * Copyright (C) xxxx the Anonymous | |
5 | * Copyright (C) 2003 Maciej W. Rozycki | |
6 | * Copyright (C) 1994 - 2003 Ralf Baechle | |
7 | * Copyright (C) 2001 MIPS Inc. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License | |
11 | * as published by the Free Software Foundation; either version | |
12 | * 2 of the License, or (at your option) any later version. | |
13 | */ | |
14 | #include <linux/config.h> | |
15 | #include <linux/init.h> | |
16 | #include <linux/kernel.h> | |
17 | #include <linux/ptrace.h> | |
18 | #include <linux/stddef.h> | |
19 | ||
20 | #include <asm/bugs.h> | |
21 | #include <asm/cpu.h> | |
22 | #include <asm/fpu.h> | |
23 | #include <asm/mipsregs.h> | |
24 | #include <asm/system.h> | |
25 | ||
26 | /* | |
27 | * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, | |
28 | * the implementation of the "wait" feature differs between CPU families. This | |
29 | * points to the function that implements CPU specific wait. | |
30 | * The wait instruction stops the pipeline and reduces the power consumption of | |
31 | * the CPU very much. | |
32 | */ | |
33 | void (*cpu_wait)(void) = NULL; | |
34 | ||
35 | static void r3081_wait(void) | |
36 | { | |
37 | unsigned long cfg = read_c0_conf(); | |
38 | write_c0_conf(cfg | R30XX_CONF_HALT); | |
39 | } | |
40 | ||
41 | static void r39xx_wait(void) | |
42 | { | |
43 | unsigned long cfg = read_c0_conf(); | |
44 | write_c0_conf(cfg | TX39_CONF_HALT); | |
45 | } | |
46 | ||
47 | static void r4k_wait(void) | |
48 | { | |
49 | __asm__(".set\tmips3\n\t" | |
50 | "wait\n\t" | |
51 | ".set\tmips0"); | |
52 | } | |
53 | ||
54 | /* | |
55 | * The Au1xxx wait is available only if we run CONFIG_PM and | |
56 | * the timer setup found we had a 32KHz counter available. | |
57 | * There are still problems with functions that may call au1k_wait | |
58 | * directly, but that will be discovered pretty quickly. | |
59 | */ | |
60 | extern void (*au1k_wait_ptr)(void); | |
61 | ||
62 | void au1k_wait(void) | |
63 | { | |
64 | #ifdef CONFIG_PM | |
65 | /* using the wait instruction makes CP0 counter unusable */ | |
66 | __asm__(".set\tmips3\n\t" | |
67 | "wait\n\t" | |
68 | "nop\n\t" | |
69 | "nop\n\t" | |
70 | "nop\n\t" | |
71 | "nop\n\t" | |
72 | ".set\tmips0"); | |
73 | #else | |
74 | __asm__("nop\n\t" | |
75 | "nop"); | |
76 | #endif | |
77 | } | |
78 | ||
79 | static inline void check_wait(void) | |
80 | { | |
81 | struct cpuinfo_mips *c = ¤t_cpu_data; | |
82 | ||
83 | printk("Checking for 'wait' instruction... "); | |
84 | switch (c->cputype) { | |
85 | case CPU_R3081: | |
86 | case CPU_R3081E: | |
87 | cpu_wait = r3081_wait; | |
88 | printk(" available.\n"); | |
89 | break; | |
90 | case CPU_TX3927: | |
91 | cpu_wait = r39xx_wait; | |
92 | printk(" available.\n"); | |
93 | break; | |
94 | case CPU_R4200: | |
95 | /* case CPU_R4300: */ | |
96 | case CPU_R4600: | |
97 | case CPU_R4640: | |
98 | case CPU_R4650: | |
99 | case CPU_R4700: | |
100 | case CPU_R5000: | |
101 | case CPU_NEVADA: | |
102 | case CPU_RM7000: | |
103 | case CPU_RM9000: | |
104 | case CPU_TX49XX: | |
105 | case CPU_4KC: | |
106 | case CPU_4KEC: | |
107 | case CPU_4KSC: | |
108 | case CPU_5KC: | |
109 | /* case CPU_20KC:*/ | |
110 | case CPU_24K: | |
111 | case CPU_25KF: | |
112 | cpu_wait = r4k_wait; | |
113 | printk(" available.\n"); | |
114 | break; | |
115 | #ifdef CONFIG_PM | |
116 | case CPU_AU1000: | |
117 | case CPU_AU1100: | |
118 | case CPU_AU1500: | |
119 | if (au1k_wait_ptr != NULL) { | |
120 | cpu_wait = au1k_wait_ptr; | |
121 | printk(" available.\n"); | |
122 | } | |
123 | else { | |
124 | printk(" unavailable.\n"); | |
125 | } | |
126 | break; | |
127 | #endif | |
128 | default: | |
129 | printk(" unavailable.\n"); | |
130 | break; | |
131 | } | |
132 | } | |
133 | ||
134 | void __init check_bugs32(void) | |
135 | { | |
136 | check_wait(); | |
137 | } | |
138 | ||
139 | /* | |
140 | * Probe whether cpu has config register by trying to play with | |
141 | * alternate cache bit and see whether it matters. | |
142 | * It's used by cpu_probe to distinguish between R3000A and R3081. | |
143 | */ | |
144 | static inline int cpu_has_confreg(void) | |
145 | { | |
146 | #ifdef CONFIG_CPU_R3000 | |
147 | extern unsigned long r3k_cache_size(unsigned long); | |
148 | unsigned long size1, size2; | |
149 | unsigned long cfg = read_c0_conf(); | |
150 | ||
151 | size1 = r3k_cache_size(ST0_ISC); | |
152 | write_c0_conf(cfg ^ R30XX_CONF_AC); | |
153 | size2 = r3k_cache_size(ST0_ISC); | |
154 | write_c0_conf(cfg); | |
155 | return size1 != size2; | |
156 | #else | |
157 | return 0; | |
158 | #endif | |
159 | } | |
160 | ||
161 | /* | |
162 | * Get the FPU Implementation/Revision. | |
163 | */ | |
164 | static inline unsigned long cpu_get_fpu_id(void) | |
165 | { | |
166 | unsigned long tmp, fpu_id; | |
167 | ||
168 | tmp = read_c0_status(); | |
169 | __enable_fpu(); | |
170 | fpu_id = read_32bit_cp1_register(CP1_REVISION); | |
171 | write_c0_status(tmp); | |
172 | return fpu_id; | |
173 | } | |
174 | ||
175 | /* | |
176 | * Check the CPU has an FPU the official way. | |
177 | */ | |
178 | static inline int __cpu_has_fpu(void) | |
179 | { | |
180 | return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE); | |
181 | } | |
182 | ||
183 | #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4KTLB \ | |
184 | | MIPS_CPU_COUNTER) | |
185 | ||
186 | static inline void cpu_probe_legacy(struct cpuinfo_mips *c) | |
187 | { | |
188 | switch (c->processor_id & 0xff00) { | |
189 | case PRID_IMP_R2000: | |
190 | c->cputype = CPU_R2000; | |
191 | c->isa_level = MIPS_CPU_ISA_I; | |
192 | c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX; | |
193 | if (__cpu_has_fpu()) | |
194 | c->options |= MIPS_CPU_FPU; | |
195 | c->tlbsize = 64; | |
196 | break; | |
197 | case PRID_IMP_R3000: | |
198 | if ((c->processor_id & 0xff) == PRID_REV_R3000A) | |
199 | if (cpu_has_confreg()) | |
200 | c->cputype = CPU_R3081E; | |
201 | else | |
202 | c->cputype = CPU_R3000A; | |
203 | else | |
204 | c->cputype = CPU_R3000; | |
205 | c->isa_level = MIPS_CPU_ISA_I; | |
206 | c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX; | |
207 | if (__cpu_has_fpu()) | |
208 | c->options |= MIPS_CPU_FPU; | |
209 | c->tlbsize = 64; | |
210 | break; | |
211 | case PRID_IMP_R4000: | |
212 | if (read_c0_config() & CONF_SC) { | |
213 | if ((c->processor_id & 0xff) >= PRID_REV_R4400) | |
214 | c->cputype = CPU_R4400PC; | |
215 | else | |
216 | c->cputype = CPU_R4000PC; | |
217 | } else { | |
218 | if ((c->processor_id & 0xff) >= PRID_REV_R4400) | |
219 | c->cputype = CPU_R4400SC; | |
220 | else | |
221 | c->cputype = CPU_R4000SC; | |
222 | } | |
223 | ||
224 | c->isa_level = MIPS_CPU_ISA_III; | |
225 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
226 | MIPS_CPU_WATCH | MIPS_CPU_VCE | | |
227 | MIPS_CPU_LLSC; | |
228 | c->tlbsize = 48; | |
229 | break; | |
230 | case PRID_IMP_VR41XX: | |
231 | switch (c->processor_id & 0xf0) { | |
232 | #ifndef CONFIG_VR4181 | |
233 | case PRID_REV_VR4111: | |
234 | c->cputype = CPU_VR4111; | |
235 | break; | |
236 | #else | |
237 | case PRID_REV_VR4181: | |
238 | c->cputype = CPU_VR4181; | |
239 | break; | |
240 | #endif | |
241 | case PRID_REV_VR4121: | |
242 | c->cputype = CPU_VR4121; | |
243 | break; | |
244 | case PRID_REV_VR4122: | |
245 | if ((c->processor_id & 0xf) < 0x3) | |
246 | c->cputype = CPU_VR4122; | |
247 | else | |
248 | c->cputype = CPU_VR4181A; | |
249 | break; | |
250 | case PRID_REV_VR4130: | |
251 | if ((c->processor_id & 0xf) < 0x4) | |
252 | c->cputype = CPU_VR4131; | |
253 | else | |
254 | c->cputype = CPU_VR4133; | |
255 | break; | |
256 | default: | |
257 | printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); | |
258 | c->cputype = CPU_VR41XX; | |
259 | break; | |
260 | } | |
261 | c->isa_level = MIPS_CPU_ISA_III; | |
262 | c->options = R4K_OPTS; | |
263 | c->tlbsize = 32; | |
264 | break; | |
265 | case PRID_IMP_R4300: | |
266 | c->cputype = CPU_R4300; | |
267 | c->isa_level = MIPS_CPU_ISA_III; | |
268 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
269 | MIPS_CPU_LLSC; | |
270 | c->tlbsize = 32; | |
271 | break; | |
272 | case PRID_IMP_R4600: | |
273 | c->cputype = CPU_R4600; | |
274 | c->isa_level = MIPS_CPU_ISA_III; | |
275 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; | |
276 | c->tlbsize = 48; | |
277 | break; | |
278 | #if 0 | |
279 | case PRID_IMP_R4650: | |
280 | /* | |
281 | * This processor doesn't have an MMU, so it's not | |
282 | * "real easy" to run Linux on it. It is left purely | |
283 | * for documentation. Commented out because it shares | |
284 | * it's c0_prid id number with the TX3900. | |
285 | */ | |
286 | c->cputype = CPU_R4650; | |
287 | c->isa_level = MIPS_CPU_ISA_III; | |
288 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; | |
289 | c->tlbsize = 48; | |
290 | break; | |
291 | #endif | |
292 | case PRID_IMP_TX39: | |
293 | c->isa_level = MIPS_CPU_ISA_I; | |
294 | c->options = MIPS_CPU_TLB; | |
295 | ||
296 | if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) { | |
297 | c->cputype = CPU_TX3927; | |
298 | c->tlbsize = 64; | |
299 | } else { | |
300 | switch (c->processor_id & 0xff) { | |
301 | case PRID_REV_TX3912: | |
302 | c->cputype = CPU_TX3912; | |
303 | c->tlbsize = 32; | |
304 | break; | |
305 | case PRID_REV_TX3922: | |
306 | c->cputype = CPU_TX3922; | |
307 | c->tlbsize = 64; | |
308 | break; | |
309 | default: | |
310 | c->cputype = CPU_UNKNOWN; | |
311 | break; | |
312 | } | |
313 | } | |
314 | break; | |
315 | case PRID_IMP_R4700: | |
316 | c->cputype = CPU_R4700; | |
317 | c->isa_level = MIPS_CPU_ISA_III; | |
318 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
319 | MIPS_CPU_LLSC; | |
320 | c->tlbsize = 48; | |
321 | break; | |
322 | case PRID_IMP_TX49: | |
323 | c->cputype = CPU_TX49XX; | |
324 | c->isa_level = MIPS_CPU_ISA_III; | |
325 | c->options = R4K_OPTS | MIPS_CPU_LLSC; | |
326 | if (!(c->processor_id & 0x08)) | |
327 | c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR; | |
328 | c->tlbsize = 48; | |
329 | break; | |
330 | case PRID_IMP_R5000: | |
331 | c->cputype = CPU_R5000; | |
332 | c->isa_level = MIPS_CPU_ISA_IV; | |
333 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
334 | MIPS_CPU_LLSC; | |
335 | c->tlbsize = 48; | |
336 | break; | |
337 | case PRID_IMP_R5432: | |
338 | c->cputype = CPU_R5432; | |
339 | c->isa_level = MIPS_CPU_ISA_IV; | |
340 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
341 | MIPS_CPU_WATCH | MIPS_CPU_LLSC; | |
342 | c->tlbsize = 48; | |
343 | break; | |
344 | case PRID_IMP_R5500: | |
345 | c->cputype = CPU_R5500; | |
346 | c->isa_level = MIPS_CPU_ISA_IV; | |
347 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
348 | MIPS_CPU_WATCH | MIPS_CPU_LLSC; | |
349 | c->tlbsize = 48; | |
350 | break; | |
351 | case PRID_IMP_NEVADA: | |
352 | c->cputype = CPU_NEVADA; | |
353 | c->isa_level = MIPS_CPU_ISA_IV; | |
354 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
355 | MIPS_CPU_DIVEC | MIPS_CPU_LLSC; | |
356 | c->tlbsize = 48; | |
357 | break; | |
358 | case PRID_IMP_R6000: | |
359 | c->cputype = CPU_R6000; | |
360 | c->isa_level = MIPS_CPU_ISA_II; | |
361 | c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | | |
362 | MIPS_CPU_LLSC; | |
363 | c->tlbsize = 32; | |
364 | break; | |
365 | case PRID_IMP_R6000A: | |
366 | c->cputype = CPU_R6000A; | |
367 | c->isa_level = MIPS_CPU_ISA_II; | |
368 | c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | | |
369 | MIPS_CPU_LLSC; | |
370 | c->tlbsize = 32; | |
371 | break; | |
372 | case PRID_IMP_RM7000: | |
373 | c->cputype = CPU_RM7000; | |
374 | c->isa_level = MIPS_CPU_ISA_IV; | |
375 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
376 | MIPS_CPU_LLSC; | |
377 | /* | |
378 | * Undocumented RM7000: Bit 29 in the info register of | |
379 | * the RM7000 v2.0 indicates if the TLB has 48 or 64 | |
380 | * entries. | |
381 | * | |
382 | * 29 1 => 64 entry JTLB | |
383 | * 0 => 48 entry JTLB | |
384 | */ | |
385 | c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; | |
386 | break; | |
387 | case PRID_IMP_RM9000: | |
388 | c->cputype = CPU_RM9000; | |
389 | c->isa_level = MIPS_CPU_ISA_IV; | |
390 | c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
391 | MIPS_CPU_LLSC; | |
392 | /* | |
393 | * Bit 29 in the info register of the RM9000 | |
394 | * indicates if the TLB has 48 or 64 entries. | |
395 | * | |
396 | * 29 1 => 64 entry JTLB | |
397 | * 0 => 48 entry JTLB | |
398 | */ | |
399 | c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; | |
400 | break; | |
401 | case PRID_IMP_R8000: | |
402 | c->cputype = CPU_R8000; | |
403 | c->isa_level = MIPS_CPU_ISA_IV; | |
404 | c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | | |
405 | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
406 | MIPS_CPU_LLSC; | |
407 | c->tlbsize = 384; /* has weird TLB: 3-way x 128 */ | |
408 | break; | |
409 | case PRID_IMP_R10000: | |
410 | c->cputype = CPU_R10000; | |
411 | c->isa_level = MIPS_CPU_ISA_IV; | |
412 | c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | | |
413 | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
414 | MIPS_CPU_COUNTER | MIPS_CPU_WATCH | | |
415 | MIPS_CPU_LLSC; | |
416 | c->tlbsize = 64; | |
417 | break; | |
418 | case PRID_IMP_R12000: | |
419 | c->cputype = CPU_R12000; | |
420 | c->isa_level = MIPS_CPU_ISA_IV; | |
421 | c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | | |
422 | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
423 | MIPS_CPU_COUNTER | MIPS_CPU_WATCH | | |
424 | MIPS_CPU_LLSC; | |
425 | c->tlbsize = 64; | |
426 | break; | |
427 | } | |
428 | } | |
429 | ||
430 | static inline void decode_config1(struct cpuinfo_mips *c) | |
431 | { | |
432 | unsigned long config0 = read_c0_config(); | |
433 | unsigned long config1; | |
434 | ||
435 | if ((config0 & (1 << 31)) == 0) | |
436 | return; /* actually wort a panic() */ | |
437 | ||
438 | /* MIPS32 or MIPS64 compliant CPU. Read Config 1 register. */ | |
439 | c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | | |
440 | MIPS_CPU_4KTLB | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC | | |
441 | MIPS_CPU_LLSC | MIPS_CPU_MCHECK; | |
442 | config1 = read_c0_config1(); | |
443 | if (config1 & (1 << 3)) | |
444 | c->options |= MIPS_CPU_WATCH; | |
445 | if (config1 & (1 << 2)) | |
446 | c->options |= MIPS_CPU_MIPS16; | |
447 | if (config1 & (1 << 1)) | |
448 | c->options |= MIPS_CPU_EJTAG; | |
449 | if (config1 & 1) { | |
450 | c->options |= MIPS_CPU_FPU; | |
451 | c->options |= MIPS_CPU_32FPR; | |
452 | } | |
453 | c->scache.flags = MIPS_CACHE_NOT_PRESENT; | |
454 | ||
455 | c->tlbsize = ((config1 >> 25) & 0x3f) + 1; | |
456 | } | |
457 | ||
458 | static inline void cpu_probe_mips(struct cpuinfo_mips *c) | |
459 | { | |
460 | decode_config1(c); | |
461 | switch (c->processor_id & 0xff00) { | |
462 | case PRID_IMP_4KC: | |
463 | c->cputype = CPU_4KC; | |
464 | c->isa_level = MIPS_CPU_ISA_M32; | |
465 | break; | |
466 | case PRID_IMP_4KEC: | |
467 | c->cputype = CPU_4KEC; | |
468 | c->isa_level = MIPS_CPU_ISA_M32; | |
469 | break; | |
470 | case PRID_IMP_4KSC: | |
471 | c->cputype = CPU_4KSC; | |
472 | c->isa_level = MIPS_CPU_ISA_M32; | |
473 | break; | |
474 | case PRID_IMP_5KC: | |
475 | c->cputype = CPU_5KC; | |
476 | c->isa_level = MIPS_CPU_ISA_M64; | |
477 | break; | |
478 | case PRID_IMP_20KC: | |
479 | c->cputype = CPU_20KC; | |
480 | c->isa_level = MIPS_CPU_ISA_M64; | |
481 | break; | |
482 | case PRID_IMP_24K: | |
483 | c->cputype = CPU_24K; | |
484 | c->isa_level = MIPS_CPU_ISA_M32; | |
485 | break; | |
486 | case PRID_IMP_25KF: | |
487 | c->cputype = CPU_25KF; | |
488 | c->isa_level = MIPS_CPU_ISA_M64; | |
489 | /* Probe for L2 cache */ | |
490 | c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; | |
491 | break; | |
492 | } | |
493 | } | |
494 | ||
495 | static inline void cpu_probe_alchemy(struct cpuinfo_mips *c) | |
496 | { | |
497 | decode_config1(c); | |
498 | switch (c->processor_id & 0xff00) { | |
499 | case PRID_IMP_AU1_REV1: | |
500 | case PRID_IMP_AU1_REV2: | |
501 | switch ((c->processor_id >> 24) & 0xff) { | |
502 | case 0: | |
503 | c->cputype = CPU_AU1000; | |
504 | break; | |
505 | case 1: | |
506 | c->cputype = CPU_AU1500; | |
507 | break; | |
508 | case 2: | |
509 | c->cputype = CPU_AU1100; | |
510 | break; | |
511 | case 3: | |
512 | c->cputype = CPU_AU1550; | |
513 | break; | |
514 | default: | |
515 | panic("Unknown Au Core!"); | |
516 | break; | |
517 | } | |
518 | c->isa_level = MIPS_CPU_ISA_M32; | |
519 | break; | |
520 | } | |
521 | } | |
522 | ||
523 | static inline void cpu_probe_sibyte(struct cpuinfo_mips *c) | |
524 | { | |
525 | decode_config1(c); | |
526 | switch (c->processor_id & 0xff00) { | |
527 | case PRID_IMP_SB1: | |
528 | c->cputype = CPU_SB1; | |
529 | c->isa_level = MIPS_CPU_ISA_M64; | |
530 | c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | | |
531 | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC | | |
532 | MIPS_CPU_MCHECK | MIPS_CPU_EJTAG | | |
533 | MIPS_CPU_WATCH | MIPS_CPU_LLSC; | |
534 | #ifndef CONFIG_SB1_PASS_1_WORKAROUNDS | |
535 | /* FPU in pass1 is known to have issues. */ | |
536 | c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR; | |
537 | #endif | |
538 | break; | |
539 | } | |
540 | } | |
541 | ||
542 | static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c) | |
543 | { | |
544 | decode_config1(c); | |
545 | switch (c->processor_id & 0xff00) { | |
546 | case PRID_IMP_SR71000: | |
547 | c->cputype = CPU_SR71000; | |
548 | c->isa_level = MIPS_CPU_ISA_M64; | |
549 | c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | | |
550 | MIPS_CPU_4KTLB | MIPS_CPU_FPU | | |
551 | MIPS_CPU_COUNTER | MIPS_CPU_MCHECK; | |
552 | c->scache.ways = 8; | |
553 | c->tlbsize = 64; | |
554 | break; | |
555 | } | |
556 | } | |
557 | ||
558 | __init void cpu_probe(void) | |
559 | { | |
560 | struct cpuinfo_mips *c = ¤t_cpu_data; | |
561 | ||
562 | c->processor_id = PRID_IMP_UNKNOWN; | |
563 | c->fpu_id = FPIR_IMP_NONE; | |
564 | c->cputype = CPU_UNKNOWN; | |
565 | ||
566 | c->processor_id = read_c0_prid(); | |
567 | switch (c->processor_id & 0xff0000) { | |
568 | case PRID_COMP_LEGACY: | |
569 | cpu_probe_legacy(c); | |
570 | break; | |
571 | case PRID_COMP_MIPS: | |
572 | cpu_probe_mips(c); | |
573 | break; | |
574 | case PRID_COMP_ALCHEMY: | |
575 | cpu_probe_alchemy(c); | |
576 | break; | |
577 | case PRID_COMP_SIBYTE: | |
578 | cpu_probe_sibyte(c); | |
579 | break; | |
580 | ||
581 | case PRID_COMP_SANDCRAFT: | |
582 | cpu_probe_sandcraft(c); | |
583 | break; | |
584 | default: | |
585 | c->cputype = CPU_UNKNOWN; | |
586 | } | |
587 | if (c->options & MIPS_CPU_FPU) | |
588 | c->fpu_id = cpu_get_fpu_id(); | |
589 | } | |
590 | ||
591 | __init void cpu_report(void) | |
592 | { | |
593 | struct cpuinfo_mips *c = ¤t_cpu_data; | |
594 | ||
595 | printk("CPU revision is: %08x\n", c->processor_id); | |
596 | if (c->options & MIPS_CPU_FPU) | |
597 | printk("FPU revision is: %08x\n", c->fpu_id); | |
598 | } |