]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Linux/PA-RISC Project (http://www.parisc-linux.org/) | |
3 | * | |
4 | * kernel entry points (interruptions, system call wrappers) | |
5 | * Copyright (C) 1999,2000 Philipp Rumpf | |
6 | * Copyright (C) 1999 SuSE GmbH Nuernberg | |
7 | * Copyright (C) 2000 Hewlett-Packard (John Marvin) | |
8 | * Copyright (C) 1999 Hewlett-Packard (Frank Rowand) | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2, or (at your option) | |
13 | * any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
23 | */ | |
24 | ||
0013a854 | 25 | #include <asm/asm-offsets.h> |
1da177e4 LT |
26 | |
27 | /* we have the following possibilities to act on an interruption: | |
28 | * - handle in assembly and use shadowed registers only | |
29 | * - save registers to kernel stack and handle in assembly or C */ | |
30 | ||
31 | ||
896a3756 | 32 | #include <asm/psw.h> |
3d73cf5e | 33 | #include <asm/cache.h> /* for L1_CACHE_SHIFT */ |
1da177e4 LT |
34 | #include <asm/assembly.h> /* for LDREG/STREG defines */ |
35 | #include <asm/pgtable.h> | |
1da177e4 LT |
36 | #include <asm/signal.h> |
37 | #include <asm/unistd.h> | |
38 | #include <asm/thread_info.h> | |
39 | ||
413059f2 | 40 | #ifdef CONFIG_64BIT |
1da177e4 LT |
41 | #define CMPIB cmpib,* |
42 | #define CMPB cmpb,* | |
43 | #define COND(x) *x | |
44 | ||
45 | .level 2.0w | |
46 | #else | |
47 | #define CMPIB cmpib, | |
48 | #define CMPB cmpb, | |
49 | #define COND(x) x | |
50 | ||
51 | .level 2.0 | |
52 | #endif | |
53 | ||
54 | .import pa_dbit_lock,data | |
55 | ||
56 | /* space_to_prot macro creates a prot id from a space id */ | |
57 | ||
58 | #if (SPACEID_SHIFT) == 0 | |
59 | .macro space_to_prot spc prot | |
60 | depd,z \spc,62,31,\prot | |
61 | .endm | |
62 | #else | |
63 | .macro space_to_prot spc prot | |
64 | extrd,u \spc,(64 - (SPACEID_SHIFT)),32,\prot | |
65 | .endm | |
66 | #endif | |
67 | ||
68 | /* Switch to virtual mapping, trashing only %r1 */ | |
69 | .macro virt_map | |
896a3756 GG |
70 | /* pcxt_ssm_bug */ |
71 | rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ | |
1da177e4 LT |
72 | mtsp %r0, %sr4 |
73 | mtsp %r0, %sr5 | |
896a3756 GG |
74 | mfsp %sr7, %r1 |
75 | or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ | |
76 | mtsp %r1, %sr3 | |
77 | tovirt_r1 %r29 | |
78 | load32 KERNEL_PSW, %r1 | |
79 | ||
80 | rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ | |
1da177e4 LT |
81 | mtsp %r0, %sr6 |
82 | mtsp %r0, %sr7 | |
1da177e4 LT |
83 | mtctl %r0, %cr17 /* Clear IIASQ tail */ |
84 | mtctl %r0, %cr17 /* Clear IIASQ head */ | |
896a3756 | 85 | mtctl %r1, %ipsw |
1da177e4 LT |
86 | load32 4f, %r1 |
87 | mtctl %r1, %cr18 /* Set IIAOQ tail */ | |
88 | ldo 4(%r1), %r1 | |
89 | mtctl %r1, %cr18 /* Set IIAOQ head */ | |
90 | rfir | |
91 | nop | |
92 | 4: | |
93 | .endm | |
94 | ||
95 | /* | |
96 | * The "get_stack" macros are responsible for determining the | |
97 | * kernel stack value. | |
98 | * | |
99 | * For Faults: | |
100 | * If sr7 == 0 | |
101 | * Already using a kernel stack, so call the | |
102 | * get_stack_use_r30 macro to push a pt_regs structure | |
103 | * on the stack, and store registers there. | |
104 | * else | |
105 | * Need to set up a kernel stack, so call the | |
106 | * get_stack_use_cr30 macro to set up a pointer | |
107 | * to the pt_regs structure contained within the | |
108 | * task pointer pointed to by cr30. Set the stack | |
109 | * pointer to point to the end of the task structure. | |
110 | * | |
111 | * For Interrupts: | |
112 | * If sr7 == 0 | |
113 | * Already using a kernel stack, check to see if r30 | |
114 | * is already pointing to the per processor interrupt | |
115 | * stack. If it is, call the get_stack_use_r30 macro | |
116 | * to push a pt_regs structure on the stack, and store | |
117 | * registers there. Otherwise, call get_stack_use_cr31 | |
118 | * to get a pointer to the base of the interrupt stack | |
119 | * and push a pt_regs structure on that stack. | |
120 | * else | |
121 | * Need to set up a kernel stack, so call the | |
122 | * get_stack_use_cr30 macro to set up a pointer | |
123 | * to the pt_regs structure contained within the | |
124 | * task pointer pointed to by cr30. Set the stack | |
125 | * pointer to point to the end of the task structure. | |
126 | * N.B: We don't use the interrupt stack for the | |
127 | * first interrupt from userland, because signals/ | |
128 | * resched's are processed when returning to userland, | |
129 | * and we can sleep in those cases. | |
130 | * | |
131 | * Note that we use shadowed registers for temps until | |
132 | * we can save %r26 and %r29. %r26 is used to preserve | |
133 | * %r8 (a shadowed register) which temporarily contained | |
134 | * either the fault type ("code") or the eirr. We need | |
135 | * to use a non-shadowed register to carry the value over | |
136 | * the rfir in virt_map. We use %r26 since this value winds | |
137 | * up being passed as the argument to either do_cpu_irq_mask | |
138 | * or handle_interruption. %r29 is used to hold a pointer | |
139 | * the register save area, and once again, it needs to | |
140 | * be a non-shadowed register so that it survives the rfir. | |
141 | * | |
142 | * N.B. TASK_SZ_ALGN and PT_SZ_ALGN include space for a stack frame. | |
143 | */ | |
144 | ||
145 | .macro get_stack_use_cr30 | |
146 | ||
147 | /* we save the registers in the task struct */ | |
148 | ||
149 | mfctl %cr30, %r1 | |
150 | tophys %r1,%r9 | |
151 | LDREG TI_TASK(%r9), %r1 /* thread_info -> task_struct */ | |
152 | tophys %r1,%r9 | |
153 | ldo TASK_REGS(%r9),%r9 | |
154 | STREG %r30, PT_GR30(%r9) | |
155 | STREG %r29,PT_GR29(%r9) | |
156 | STREG %r26,PT_GR26(%r9) | |
157 | copy %r9,%r29 | |
158 | mfctl %cr30, %r1 | |
159 | ldo THREAD_SZ_ALGN(%r1), %r30 | |
160 | .endm | |
161 | ||
162 | .macro get_stack_use_r30 | |
163 | ||
164 | /* we put a struct pt_regs on the stack and save the registers there */ | |
165 | ||
166 | tophys %r30,%r9 | |
167 | STREG %r30,PT_GR30(%r9) | |
168 | ldo PT_SZ_ALGN(%r30),%r30 | |
169 | STREG %r29,PT_GR29(%r9) | |
170 | STREG %r26,PT_GR26(%r9) | |
171 | copy %r9,%r29 | |
172 | .endm | |
173 | ||
174 | .macro rest_stack | |
175 | LDREG PT_GR1(%r29), %r1 | |
176 | LDREG PT_GR30(%r29),%r30 | |
177 | LDREG PT_GR29(%r29),%r29 | |
178 | .endm | |
179 | ||
180 | /* default interruption handler | |
181 | * (calls traps.c:handle_interruption) */ | |
182 | .macro def code | |
183 | b intr_save | |
184 | ldi \code, %r8 | |
185 | .align 32 | |
186 | .endm | |
187 | ||
188 | /* Interrupt interruption handler | |
189 | * (calls irq.c:do_cpu_irq_mask) */ | |
190 | .macro extint code | |
191 | b intr_extint | |
192 | mfsp %sr7,%r16 | |
193 | .align 32 | |
194 | .endm | |
195 | ||
196 | .import os_hpmc, code | |
197 | ||
198 | /* HPMC handler */ | |
199 | .macro hpmc code | |
200 | nop /* must be a NOP, will be patched later */ | |
201 | load32 PA(os_hpmc), %r3 | |
202 | bv,n 0(%r3) | |
203 | nop | |
204 | .word 0 /* checksum (will be patched) */ | |
205 | .word PA(os_hpmc) /* address of handler */ | |
206 | .word 0 /* length of handler */ | |
207 | .endm | |
208 | ||
209 | /* | |
210 | * Performance Note: Instructions will be moved up into | |
211 | * this part of the code later on, once we are sure | |
212 | * that the tlb miss handlers are close to final form. | |
213 | */ | |
214 | ||
215 | /* Register definitions for tlb miss handler macros */ | |
216 | ||
217 | va = r8 /* virtual address for which the trap occured */ | |
218 | spc = r24 /* space for which the trap occured */ | |
219 | ||
413059f2 | 220 | #ifndef CONFIG_64BIT |
1da177e4 LT |
221 | |
222 | /* | |
223 | * itlb miss interruption handler (parisc 1.1 - 32 bit) | |
224 | */ | |
225 | ||
226 | .macro itlb_11 code | |
227 | ||
228 | mfctl %pcsq, spc | |
229 | b itlb_miss_11 | |
230 | mfctl %pcoq, va | |
231 | ||
232 | .align 32 | |
233 | .endm | |
234 | #endif | |
235 | ||
236 | /* | |
237 | * itlb miss interruption handler (parisc 2.0) | |
238 | */ | |
239 | ||
240 | .macro itlb_20 code | |
241 | mfctl %pcsq, spc | |
413059f2 | 242 | #ifdef CONFIG_64BIT |
1da177e4 LT |
243 | b itlb_miss_20w |
244 | #else | |
245 | b itlb_miss_20 | |
246 | #endif | |
247 | mfctl %pcoq, va | |
248 | ||
249 | .align 32 | |
250 | .endm | |
251 | ||
413059f2 | 252 | #ifndef CONFIG_64BIT |
1da177e4 LT |
253 | /* |
254 | * naitlb miss interruption handler (parisc 1.1 - 32 bit) | |
255 | * | |
256 | * Note: naitlb misses will be treated | |
257 | * as an ordinary itlb miss for now. | |
258 | * However, note that naitlb misses | |
259 | * have the faulting address in the | |
260 | * IOR/ISR. | |
261 | */ | |
262 | ||
263 | .macro naitlb_11 code | |
264 | ||
265 | mfctl %isr,spc | |
266 | b itlb_miss_11 | |
267 | mfctl %ior,va | |
268 | /* FIXME: If user causes a naitlb miss, the priv level may not be in | |
269 | * lower bits of va, where the itlb miss handler is expecting them | |
270 | */ | |
271 | ||
272 | .align 32 | |
273 | .endm | |
274 | #endif | |
275 | ||
276 | /* | |
277 | * naitlb miss interruption handler (parisc 2.0) | |
278 | * | |
279 | * Note: naitlb misses will be treated | |
280 | * as an ordinary itlb miss for now. | |
281 | * However, note that naitlb misses | |
282 | * have the faulting address in the | |
283 | * IOR/ISR. | |
284 | */ | |
285 | ||
286 | .macro naitlb_20 code | |
287 | ||
288 | mfctl %isr,spc | |
413059f2 | 289 | #ifdef CONFIG_64BIT |
1da177e4 LT |
290 | b itlb_miss_20w |
291 | #else | |
292 | b itlb_miss_20 | |
293 | #endif | |
294 | mfctl %ior,va | |
295 | /* FIXME: If user causes a naitlb miss, the priv level may not be in | |
296 | * lower bits of va, where the itlb miss handler is expecting them | |
297 | */ | |
298 | ||
299 | .align 32 | |
300 | .endm | |
301 | ||
413059f2 | 302 | #ifndef CONFIG_64BIT |
1da177e4 LT |
303 | /* |
304 | * dtlb miss interruption handler (parisc 1.1 - 32 bit) | |
305 | */ | |
306 | ||
307 | .macro dtlb_11 code | |
308 | ||
309 | mfctl %isr, spc | |
310 | b dtlb_miss_11 | |
311 | mfctl %ior, va | |
312 | ||
313 | .align 32 | |
314 | .endm | |
315 | #endif | |
316 | ||
317 | /* | |
318 | * dtlb miss interruption handler (parisc 2.0) | |
319 | */ | |
320 | ||
321 | .macro dtlb_20 code | |
322 | ||
323 | mfctl %isr, spc | |
413059f2 | 324 | #ifdef CONFIG_64BIT |
1da177e4 LT |
325 | b dtlb_miss_20w |
326 | #else | |
327 | b dtlb_miss_20 | |
328 | #endif | |
329 | mfctl %ior, va | |
330 | ||
331 | .align 32 | |
332 | .endm | |
333 | ||
413059f2 | 334 | #ifndef CONFIG_64BIT |
1da177e4 LT |
335 | /* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */ |
336 | ||
337 | .macro nadtlb_11 code | |
338 | ||
339 | mfctl %isr,spc | |
340 | b nadtlb_miss_11 | |
341 | mfctl %ior,va | |
342 | ||
343 | .align 32 | |
344 | .endm | |
345 | #endif | |
346 | ||
347 | /* nadtlb miss interruption handler (parisc 2.0) */ | |
348 | ||
349 | .macro nadtlb_20 code | |
350 | ||
351 | mfctl %isr,spc | |
413059f2 | 352 | #ifdef CONFIG_64BIT |
1da177e4 LT |
353 | b nadtlb_miss_20w |
354 | #else | |
355 | b nadtlb_miss_20 | |
356 | #endif | |
357 | mfctl %ior,va | |
358 | ||
359 | .align 32 | |
360 | .endm | |
361 | ||
413059f2 | 362 | #ifndef CONFIG_64BIT |
1da177e4 LT |
363 | /* |
364 | * dirty bit trap interruption handler (parisc 1.1 - 32 bit) | |
365 | */ | |
366 | ||
367 | .macro dbit_11 code | |
368 | ||
369 | mfctl %isr,spc | |
370 | b dbit_trap_11 | |
371 | mfctl %ior,va | |
372 | ||
373 | .align 32 | |
374 | .endm | |
375 | #endif | |
376 | ||
377 | /* | |
378 | * dirty bit trap interruption handler (parisc 2.0) | |
379 | */ | |
380 | ||
381 | .macro dbit_20 code | |
382 | ||
383 | mfctl %isr,spc | |
413059f2 | 384 | #ifdef CONFIG_64BIT |
1da177e4 LT |
385 | b dbit_trap_20w |
386 | #else | |
387 | b dbit_trap_20 | |
388 | #endif | |
389 | mfctl %ior,va | |
390 | ||
391 | .align 32 | |
392 | .endm | |
393 | ||
394 | /* The following are simple 32 vs 64 bit instruction | |
395 | * abstractions for the macros */ | |
396 | .macro EXTR reg1,start,length,reg2 | |
413059f2 | 397 | #ifdef CONFIG_64BIT |
1da177e4 LT |
398 | extrd,u \reg1,32+\start,\length,\reg2 |
399 | #else | |
400 | extrw,u \reg1,\start,\length,\reg2 | |
401 | #endif | |
402 | .endm | |
403 | ||
404 | .macro DEP reg1,start,length,reg2 | |
413059f2 | 405 | #ifdef CONFIG_64BIT |
1da177e4 LT |
406 | depd \reg1,32+\start,\length,\reg2 |
407 | #else | |
408 | depw \reg1,\start,\length,\reg2 | |
409 | #endif | |
410 | .endm | |
411 | ||
412 | .macro DEPI val,start,length,reg | |
413059f2 | 413 | #ifdef CONFIG_64BIT |
1da177e4 LT |
414 | depdi \val,32+\start,\length,\reg |
415 | #else | |
416 | depwi \val,\start,\length,\reg | |
417 | #endif | |
418 | .endm | |
419 | ||
420 | /* In LP64, the space contains part of the upper 32 bits of the | |
421 | * fault. We have to extract this and place it in the va, | |
422 | * zeroing the corresponding bits in the space register */ | |
423 | .macro space_adjust spc,va,tmp | |
413059f2 | 424 | #ifdef CONFIG_64BIT |
1da177e4 LT |
425 | extrd,u \spc,63,SPACEID_SHIFT,\tmp |
426 | depd %r0,63,SPACEID_SHIFT,\spc | |
427 | depd \tmp,31,SPACEID_SHIFT,\va | |
428 | #endif | |
429 | .endm | |
430 | ||
431 | .import swapper_pg_dir,code | |
432 | ||
433 | /* Get the pgd. For faults on space zero (kernel space), this | |
434 | * is simply swapper_pg_dir. For user space faults, the | |
435 | * pgd is stored in %cr25 */ | |
436 | .macro get_pgd spc,reg | |
437 | ldil L%PA(swapper_pg_dir),\reg | |
438 | ldo R%PA(swapper_pg_dir)(\reg),\reg | |
439 | or,COND(=) %r0,\spc,%r0 | |
440 | mfctl %cr25,\reg | |
441 | .endm | |
442 | ||
443 | /* | |
444 | space_check(spc,tmp,fault) | |
445 | ||
446 | spc - The space we saw the fault with. | |
447 | tmp - The place to store the current space. | |
448 | fault - Function to call on failure. | |
449 | ||
450 | Only allow faults on different spaces from the | |
451 | currently active one if we're the kernel | |
452 | ||
453 | */ | |
454 | .macro space_check spc,tmp,fault | |
455 | mfsp %sr7,\tmp | |
456 | or,COND(<>) %r0,\spc,%r0 /* user may execute gateway page | |
457 | * as kernel, so defeat the space | |
458 | * check if it is */ | |
459 | copy \spc,\tmp | |
460 | or,COND(=) %r0,\tmp,%r0 /* nullify if executing as kernel */ | |
461 | cmpb,COND(<>),n \tmp,\spc,\fault | |
462 | .endm | |
463 | ||
464 | /* Look up a PTE in a 2-Level scheme (faulting at each | |
465 | * level if the entry isn't present | |
466 | * | |
467 | * NOTE: we use ldw even for LP64, since the short pointers | |
468 | * can address up to 1TB | |
469 | */ | |
470 | .macro L2_ptep pmd,pte,index,va,fault | |
471 | #if PT_NLEVELS == 3 | |
472 | EXTR \va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index | |
473 | #else | |
474 | EXTR \va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index | |
475 | #endif | |
476 | DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */ | |
477 | copy %r0,\pte | |
478 | ldw,s \index(\pmd),\pmd | |
479 | bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault | |
480 | DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ | |
481 | copy \pmd,%r9 | |
3d73cf5e | 482 | SHLREG %r9,PxD_VALUE_SHIFT,\pmd |
1da177e4 LT |
483 | EXTR \va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index |
484 | DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */ | |
485 | shladd \index,BITS_PER_PTE_ENTRY,\pmd,\pmd | |
486 | LDREG %r0(\pmd),\pte /* pmd is now pte */ | |
487 | bb,>=,n \pte,_PAGE_PRESENT_BIT,\fault | |
488 | .endm | |
489 | ||
490 | /* Look up PTE in a 3-Level scheme. | |
491 | * | |
492 | * Here we implement a Hybrid L2/L3 scheme: we allocate the | |
493 | * first pmd adjacent to the pgd. This means that we can | |
494 | * subtract a constant offset to get to it. The pmd and pgd | |
495 | * sizes are arranged so that a single pmd covers 4GB (giving | |
496 | * a full LP64 process access to 8TB) so our lookups are | |
497 | * effectively L2 for the first 4GB of the kernel (i.e. for | |
498 | * all ILP32 processes and all the kernel for machines with | |
499 | * under 4GB of memory) */ | |
500 | .macro L3_ptep pgd,pte,index,va,fault | |
2fd83038 | 501 | #if PT_NLEVELS == 3 /* we might have a 2-Level scheme, e.g. with 16kb page size */ |
1da177e4 LT |
502 | extrd,u \va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index |
503 | copy %r0,\pte | |
2fd83038 | 504 | extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 |
1da177e4 | 505 | ldw,s \index(\pgd),\pgd |
2fd83038 | 506 | extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 |
1da177e4 | 507 | bb,>=,n \pgd,_PxD_PRESENT_BIT,\fault |
2fd83038 | 508 | extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 |
1da177e4 | 509 | shld \pgd,PxD_VALUE_SHIFT,\index |
2fd83038 | 510 | extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 |
1da177e4 | 511 | copy \index,\pgd |
2fd83038 | 512 | extrd,u,*<> \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 |
1da177e4 | 513 | ldo ASM_PGD_PMD_OFFSET(\pgd),\pgd |
2fd83038 | 514 | #endif |
1da177e4 LT |
515 | L2_ptep \pgd,\pte,\index,\va,\fault |
516 | .endm | |
517 | ||
518 | /* Set the _PAGE_ACCESSED bit of the PTE. Be clever and | |
519 | * don't needlessly dirty the cache line if it was already set */ | |
520 | .macro update_ptep ptep,pte,tmp,tmp1 | |
521 | ldi _PAGE_ACCESSED,\tmp1 | |
522 | or \tmp1,\pte,\tmp | |
523 | and,COND(<>) \tmp1,\pte,%r0 | |
524 | STREG \tmp,0(\ptep) | |
525 | .endm | |
526 | ||
527 | /* Set the dirty bit (and accessed bit). No need to be | |
528 | * clever, this is only used from the dirty fault */ | |
529 | .macro update_dirty ptep,pte,tmp | |
530 | ldi _PAGE_ACCESSED|_PAGE_DIRTY,\tmp | |
531 | or \tmp,\pte,\pte | |
532 | STREG \pte,0(\ptep) | |
533 | .endm | |
534 | ||
535 | /* Convert the pte and prot to tlb insertion values. How | |
536 | * this happens is quite subtle, read below */ | |
537 | .macro make_insert_tlb spc,pte,prot | |
538 | space_to_prot \spc \prot /* create prot id from space */ | |
539 | /* The following is the real subtlety. This is depositing | |
540 | * T <-> _PAGE_REFTRAP | |
541 | * D <-> _PAGE_DIRTY | |
542 | * B <-> _PAGE_DMB (memory break) | |
543 | * | |
544 | * Then incredible subtlety: The access rights are | |
545 | * _PAGE_GATEWAY _PAGE_EXEC _PAGE_READ | |
546 | * See 3-14 of the parisc 2.0 manual | |
547 | * | |
548 | * Finally, _PAGE_READ goes in the top bit of PL1 (so we | |
549 | * trigger an access rights trap in user space if the user | |
550 | * tries to read an unreadable page */ | |
551 | depd \pte,8,7,\prot | |
552 | ||
553 | /* PAGE_USER indicates the page can be read with user privileges, | |
554 | * so deposit X1|11 to PL1|PL2 (remember the upper bit of PL1 | |
555 | * contains _PAGE_READ */ | |
556 | extrd,u,*= \pte,_PAGE_USER_BIT+32,1,%r0 | |
557 | depdi 7,11,3,\prot | |
558 | /* If we're a gateway page, drop PL2 back to zero for promotion | |
559 | * to kernel privilege (so we can execute the page as kernel). | |
560 | * Any privilege promotion page always denys read and write */ | |
561 | extrd,u,*= \pte,_PAGE_GATEWAY_BIT+32,1,%r0 | |
562 | depd %r0,11,2,\prot /* If Gateway, Set PL2 to 0 */ | |
563 | ||
2fd83038 HD |
564 | /* Enforce uncacheable pages. |
565 | * This should ONLY be use for MMIO on PA 2.0 machines. | |
566 | * Memory/DMA is cache coherent on all PA2.0 machines we support | |
567 | * (that means T-class is NOT supported) and the memory controllers | |
568 | * on most of those machines only handles cache transactions. | |
569 | */ | |
570 | extrd,u,*= \pte,_PAGE_NO_CACHE_BIT+32,1,%r0 | |
571 | depi 1,12,1,\prot | |
1da177e4 | 572 | |
2fd83038 HD |
573 | /* Drop prot bits and convert to page addr for iitlbt and idtlbt */ |
574 | extrd,u \pte,(63-ASM_PFN_PTE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte | |
575 | depdi _PAGE_SIZE_ENCODING_DEFAULT,63,63-58,\pte | |
1da177e4 LT |
576 | .endm |
577 | ||
578 | /* Identical macro to make_insert_tlb above, except it | |
579 | * makes the tlb entry for the differently formatted pa11 | |
580 | * insertion instructions */ | |
581 | .macro make_insert_tlb_11 spc,pte,prot | |
582 | zdep \spc,30,15,\prot | |
583 | dep \pte,8,7,\prot | |
584 | extru,= \pte,_PAGE_NO_CACHE_BIT,1,%r0 | |
585 | depi 1,12,1,\prot | |
586 | extru,= \pte,_PAGE_USER_BIT,1,%r0 | |
587 | depi 7,11,3,\prot /* Set for user space (1 rsvd for read) */ | |
588 | extru,= \pte,_PAGE_GATEWAY_BIT,1,%r0 | |
589 | depi 0,11,2,\prot /* If Gateway, Set PL2 to 0 */ | |
590 | ||
591 | /* Get rid of prot bits and convert to page addr for iitlba */ | |
592 | ||
2fd83038 | 593 | depi _PAGE_SIZE_ENCODING_DEFAULT,31,ASM_PFN_PTE_SHIFT,\pte |
1da177e4 | 594 | extru \pte,24,25,\pte |
1da177e4 LT |
595 | .endm |
596 | ||
597 | /* This is for ILP32 PA2.0 only. The TLB insertion needs | |
598 | * to extend into I/O space if the address is 0xfXXXXXXX | |
599 | * so we extend the f's into the top word of the pte in | |
600 | * this case */ | |
601 | .macro f_extend pte,tmp | |
602 | extrd,s \pte,42,4,\tmp | |
603 | addi,<> 1,\tmp,%r0 | |
604 | extrd,s \pte,63,25,\pte | |
605 | .endm | |
606 | ||
607 | /* The alias region is an 8MB aligned 16MB to do clear and | |
608 | * copy user pages at addresses congruent with the user | |
609 | * virtual address. | |
610 | * | |
611 | * To use the alias page, you set %r26 up with the to TLB | |
612 | * entry (identifying the physical page) and %r23 up with | |
613 | * the from tlb entry (or nothing if only a to entry---for | |
614 | * clear_user_page_asm) */ | |
615 | .macro do_alias spc,tmp,tmp1,va,pte,prot,fault | |
616 | cmpib,COND(<>),n 0,\spc,\fault | |
617 | ldil L%(TMPALIAS_MAP_START),\tmp | |
413059f2 | 618 | #if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000) |
1da177e4 LT |
619 | /* on LP64, ldi will sign extend into the upper 32 bits, |
620 | * which is behaviour we don't want */ | |
621 | depdi 0,31,32,\tmp | |
622 | #endif | |
623 | copy \va,\tmp1 | |
624 | DEPI 0,31,23,\tmp1 | |
625 | cmpb,COND(<>),n \tmp,\tmp1,\fault | |
626 | ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),\prot | |
627 | depd,z \prot,8,7,\prot | |
628 | /* | |
629 | * OK, it is in the temp alias region, check whether "from" or "to". | |
630 | * Check "subtle" note in pacache.S re: r23/r26. | |
631 | */ | |
413059f2 | 632 | #ifdef CONFIG_64BIT |
1da177e4 LT |
633 | extrd,u,*= \va,41,1,%r0 |
634 | #else | |
635 | extrw,u,= \va,9,1,%r0 | |
636 | #endif | |
637 | or,COND(tr) %r23,%r0,\pte | |
638 | or %r26,%r0,\pte | |
639 | .endm | |
640 | ||
641 | ||
642 | /* | |
643 | * Align fault_vector_20 on 4K boundary so that both | |
644 | * fault_vector_11 and fault_vector_20 are on the | |
645 | * same page. This is only necessary as long as we | |
646 | * write protect the kernel text, which we may stop | |
647 | * doing once we use large page translations to cover | |
648 | * the static part of the kernel address space. | |
649 | */ | |
650 | ||
651 | .export fault_vector_20 | |
652 | ||
653 | .text | |
654 | ||
655 | .align 4096 | |
656 | ||
657 | fault_vector_20: | |
658 | /* First vector is invalid (0) */ | |
659 | .ascii "cows can fly" | |
660 | .byte 0 | |
661 | .align 32 | |
662 | ||
663 | hpmc 1 | |
664 | def 2 | |
665 | def 3 | |
666 | extint 4 | |
667 | def 5 | |
668 | itlb_20 6 | |
669 | def 7 | |
670 | def 8 | |
671 | def 9 | |
672 | def 10 | |
673 | def 11 | |
674 | def 12 | |
675 | def 13 | |
676 | def 14 | |
677 | dtlb_20 15 | |
678 | #if 0 | |
679 | naitlb_20 16 | |
680 | #else | |
681 | def 16 | |
682 | #endif | |
683 | nadtlb_20 17 | |
684 | def 18 | |
685 | def 19 | |
686 | dbit_20 20 | |
687 | def 21 | |
688 | def 22 | |
689 | def 23 | |
690 | def 24 | |
691 | def 25 | |
692 | def 26 | |
693 | def 27 | |
694 | def 28 | |
695 | def 29 | |
696 | def 30 | |
697 | def 31 | |
698 | ||
413059f2 | 699 | #ifndef CONFIG_64BIT |
1da177e4 LT |
700 | |
701 | .export fault_vector_11 | |
702 | ||
703 | .align 2048 | |
704 | ||
705 | fault_vector_11: | |
706 | /* First vector is invalid (0) */ | |
707 | .ascii "cows can fly" | |
708 | .byte 0 | |
709 | .align 32 | |
710 | ||
711 | hpmc 1 | |
712 | def 2 | |
713 | def 3 | |
714 | extint 4 | |
715 | def 5 | |
716 | itlb_11 6 | |
717 | def 7 | |
718 | def 8 | |
719 | def 9 | |
720 | def 10 | |
721 | def 11 | |
722 | def 12 | |
723 | def 13 | |
724 | def 14 | |
725 | dtlb_11 15 | |
726 | #if 0 | |
727 | naitlb_11 16 | |
728 | #else | |
729 | def 16 | |
730 | #endif | |
731 | nadtlb_11 17 | |
732 | def 18 | |
733 | def 19 | |
734 | dbit_11 20 | |
735 | def 21 | |
736 | def 22 | |
737 | def 23 | |
738 | def 24 | |
739 | def 25 | |
740 | def 26 | |
741 | def 27 | |
742 | def 28 | |
743 | def 29 | |
744 | def 30 | |
745 | def 31 | |
746 | ||
747 | #endif | |
748 | ||
749 | .import handle_interruption,code | |
750 | .import do_cpu_irq_mask,code | |
751 | ||
752 | /* | |
753 | * r26 = function to be called | |
754 | * r25 = argument to pass in | |
755 | * r24 = flags for do_fork() | |
756 | * | |
757 | * Kernel threads don't ever return, so they don't need | |
758 | * a true register context. We just save away the arguments | |
759 | * for copy_thread/ret_ to properly set up the child. | |
760 | */ | |
761 | ||
762 | #define CLONE_VM 0x100 /* Must agree with <linux/sched.h> */ | |
763 | #define CLONE_UNTRACED 0x00800000 | |
764 | ||
765 | .export __kernel_thread, code | |
766 | .import do_fork | |
767 | __kernel_thread: | |
768 | STREG %r2, -RP_OFFSET(%r30) | |
769 | ||
770 | copy %r30, %r1 | |
771 | ldo PT_SZ_ALGN(%r30),%r30 | |
413059f2 | 772 | #ifdef CONFIG_64BIT |
1da177e4 LT |
773 | /* Yo, function pointers in wide mode are little structs... -PB */ |
774 | ldd 24(%r26), %r2 | |
775 | STREG %r2, PT_GR27(%r1) /* Store childs %dp */ | |
776 | ldd 16(%r26), %r26 | |
777 | ||
778 | STREG %r22, PT_GR22(%r1) /* save r22 (arg5) */ | |
779 | copy %r0, %r22 /* user_tid */ | |
780 | #endif | |
781 | STREG %r26, PT_GR26(%r1) /* Store function & argument for child */ | |
782 | STREG %r25, PT_GR25(%r1) | |
783 | ldil L%CLONE_UNTRACED, %r26 | |
784 | ldo CLONE_VM(%r26), %r26 /* Force CLONE_VM since only init_mm */ | |
785 | or %r26, %r24, %r26 /* will have kernel mappings. */ | |
786 | ldi 1, %r25 /* stack_start, signals kernel thread */ | |
787 | stw %r0, -52(%r30) /* user_tid */ | |
413059f2 | 788 | #ifdef CONFIG_64BIT |
1da177e4 LT |
789 | ldo -16(%r30),%r29 /* Reference param save area */ |
790 | #endif | |
791 | BL do_fork, %r2 | |
792 | copy %r1, %r24 /* pt_regs */ | |
793 | ||
794 | /* Parent Returns here */ | |
795 | ||
796 | LDREG -PT_SZ_ALGN-RP_OFFSET(%r30), %r2 | |
797 | ldo -PT_SZ_ALGN(%r30), %r30 | |
798 | bv %r0(%r2) | |
799 | nop | |
800 | ||
801 | /* | |
802 | * Child Returns here | |
803 | * | |
804 | * copy_thread moved args from temp save area set up above | |
805 | * into task save area. | |
806 | */ | |
807 | ||
808 | .export ret_from_kernel_thread | |
809 | ret_from_kernel_thread: | |
810 | ||
811 | /* Call schedule_tail first though */ | |
812 | BL schedule_tail, %r2 | |
813 | nop | |
814 | ||
815 | LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1 | |
816 | LDREG TASK_PT_GR25(%r1), %r26 | |
413059f2 | 817 | #ifdef CONFIG_64BIT |
1da177e4 LT |
818 | LDREG TASK_PT_GR27(%r1), %r27 |
819 | LDREG TASK_PT_GR22(%r1), %r22 | |
820 | #endif | |
821 | LDREG TASK_PT_GR26(%r1), %r1 | |
822 | ble 0(%sr7, %r1) | |
823 | copy %r31, %r2 | |
824 | ||
413059f2 | 825 | #ifdef CONFIG_64BIT |
1da177e4 LT |
826 | ldo -16(%r30),%r29 /* Reference param save area */ |
827 | loadgp /* Thread could have been in a module */ | |
828 | #endif | |
99ac7947 | 829 | #ifndef CONFIG_64BIT |
1da177e4 | 830 | b sys_exit |
99ac7947 RC |
831 | #else |
832 | load32 sys_exit, %r1 | |
833 | bv %r0(%r1) | |
834 | #endif | |
1da177e4 LT |
835 | ldi 0, %r26 |
836 | ||
837 | .import sys_execve, code | |
838 | .export __execve, code | |
839 | __execve: | |
840 | copy %r2, %r15 | |
841 | copy %r30, %r16 | |
842 | ldo PT_SZ_ALGN(%r30), %r30 | |
843 | STREG %r26, PT_GR26(%r16) | |
844 | STREG %r25, PT_GR25(%r16) | |
845 | STREG %r24, PT_GR24(%r16) | |
413059f2 | 846 | #ifdef CONFIG_64BIT |
1da177e4 LT |
847 | ldo -16(%r30),%r29 /* Reference param save area */ |
848 | #endif | |
849 | BL sys_execve, %r2 | |
850 | copy %r16, %r26 | |
851 | ||
852 | cmpib,=,n 0,%r28,intr_return /* forward */ | |
853 | ||
854 | /* yes, this will trap and die. */ | |
855 | copy %r15, %r2 | |
856 | copy %r16, %r30 | |
857 | bv %r0(%r2) | |
858 | nop | |
859 | ||
860 | .align 4 | |
861 | ||
862 | /* | |
863 | * struct task_struct *_switch_to(struct task_struct *prev, | |
864 | * struct task_struct *next) | |
865 | * | |
866 | * switch kernel stacks and return prev */ | |
867 | .export _switch_to, code | |
868 | _switch_to: | |
869 | STREG %r2, -RP_OFFSET(%r30) | |
870 | ||
618febd6 | 871 | callee_save_float |
1da177e4 LT |
872 | callee_save |
873 | ||
874 | load32 _switch_to_ret, %r2 | |
875 | ||
876 | STREG %r2, TASK_PT_KPC(%r26) | |
877 | LDREG TASK_PT_KPC(%r25), %r2 | |
878 | ||
879 | STREG %r30, TASK_PT_KSP(%r26) | |
880 | LDREG TASK_PT_KSP(%r25), %r30 | |
881 | LDREG TASK_THREAD_INFO(%r25), %r25 | |
882 | bv %r0(%r2) | |
883 | mtctl %r25,%cr30 | |
884 | ||
885 | _switch_to_ret: | |
886 | mtctl %r0, %cr0 /* Needed for single stepping */ | |
887 | callee_rest | |
618febd6 | 888 | callee_rest_float |
1da177e4 LT |
889 | |
890 | LDREG -RP_OFFSET(%r30), %r2 | |
891 | bv %r0(%r2) | |
892 | copy %r26, %r28 | |
893 | ||
894 | /* | |
895 | * Common rfi return path for interruptions, kernel execve, and | |
896 | * sys_rt_sigreturn (sometimes). The sys_rt_sigreturn syscall will | |
897 | * return via this path if the signal was received when the process | |
898 | * was running; if the process was blocked on a syscall then the | |
899 | * normal syscall_exit path is used. All syscalls for traced | |
900 | * proceses exit via intr_restore. | |
901 | * | |
902 | * XXX If any syscalls that change a processes space id ever exit | |
903 | * this way, then we will need to copy %sr3 in to PT_SR[3..7], and | |
904 | * adjust IASQ[0..1]. | |
905 | * | |
1da177e4 LT |
906 | */ |
907 | ||
908 | .align 4096 | |
909 | ||
910 | .export syscall_exit_rfi | |
911 | syscall_exit_rfi: | |
912 | mfctl %cr30,%r16 | |
913 | LDREG TI_TASK(%r16), %r16 /* thread_info -> task_struct */ | |
914 | ldo TASK_REGS(%r16),%r16 | |
915 | /* Force iaoq to userspace, as the user has had access to our current | |
916 | * context via sigcontext. Also Filter the PSW for the same reason. | |
917 | */ | |
918 | LDREG PT_IAOQ0(%r16),%r19 | |
919 | depi 3,31,2,%r19 | |
920 | STREG %r19,PT_IAOQ0(%r16) | |
921 | LDREG PT_IAOQ1(%r16),%r19 | |
922 | depi 3,31,2,%r19 | |
923 | STREG %r19,PT_IAOQ1(%r16) | |
924 | LDREG PT_PSW(%r16),%r19 | |
925 | load32 USER_PSW_MASK,%r1 | |
413059f2 | 926 | #ifdef CONFIG_64BIT |
1da177e4 LT |
927 | load32 USER_PSW_HI_MASK,%r20 |
928 | depd %r20,31,32,%r1 | |
929 | #endif | |
930 | and %r19,%r1,%r19 /* Mask out bits that user shouldn't play with */ | |
931 | load32 USER_PSW,%r1 | |
932 | or %r19,%r1,%r19 /* Make sure default USER_PSW bits are set */ | |
933 | STREG %r19,PT_PSW(%r16) | |
934 | ||
935 | /* | |
936 | * If we aren't being traced, we never saved space registers | |
937 | * (we don't store them in the sigcontext), so set them | |
938 | * to "proper" values now (otherwise we'll wind up restoring | |
939 | * whatever was last stored in the task structure, which might | |
940 | * be inconsistent if an interrupt occured while on the gateway | |
4b3f686d ML |
941 | * page). Note that we may be "trashing" values the user put in |
942 | * them, but we don't support the user changing them. | |
1da177e4 LT |
943 | */ |
944 | ||
945 | STREG %r0,PT_SR2(%r16) | |
946 | mfsp %sr3,%r19 | |
947 | STREG %r19,PT_SR0(%r16) | |
948 | STREG %r19,PT_SR1(%r16) | |
949 | STREG %r19,PT_SR3(%r16) | |
950 | STREG %r19,PT_SR4(%r16) | |
951 | STREG %r19,PT_SR5(%r16) | |
952 | STREG %r19,PT_SR6(%r16) | |
953 | STREG %r19,PT_SR7(%r16) | |
954 | ||
955 | intr_return: | |
956 | /* NOTE: Need to enable interrupts incase we schedule. */ | |
957 | ssm PSW_SM_I, %r0 | |
958 | ||
959 | /* Check for software interrupts */ | |
960 | ||
961 | .import irq_stat,data | |
962 | ||
963 | load32 irq_stat,%r19 | |
964 | #ifdef CONFIG_SMP | |
965 | mfctl %cr30,%r1 | |
966 | ldw TI_CPU(%r1),%r1 /* get cpu # - int */ | |
967 | /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount | |
968 | ** irq_stat[] is defined using ____cacheline_aligned. | |
969 | */ | |
3d73cf5e | 970 | SHLREG %r1,L1_CACHE_SHIFT,%r20 |
1da177e4 LT |
971 | add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ |
972 | #endif /* CONFIG_SMP */ | |
973 | ||
1da177e4 LT |
974 | intr_check_resched: |
975 | ||
976 | /* check for reschedule */ | |
977 | mfctl %cr30,%r1 | |
978 | LDREG TI_FLAGS(%r1),%r19 /* sched.h: TIF_NEED_RESCHED */ | |
979 | bb,<,n %r19,31-TIF_NEED_RESCHED,intr_do_resched /* forward */ | |
980 | ||
981 | intr_check_sig: | |
982 | /* As above */ | |
983 | mfctl %cr30,%r1 | |
984 | LDREG TI_FLAGS(%r1),%r19 /* sched.h: TIF_SIGPENDING */ | |
985 | bb,<,n %r19, 31-TIF_SIGPENDING, intr_do_signal /* forward */ | |
986 | ||
987 | intr_restore: | |
988 | copy %r16,%r29 | |
989 | ldo PT_FR31(%r29),%r1 | |
990 | rest_fp %r1 | |
991 | rest_general %r29 | |
992 | ||
896a3756 GG |
993 | /* inverse of virt_map */ |
994 | pcxt_ssm_bug | |
995 | rsm PSW_SM_QUIET,%r0 /* prepare for rfi */ | |
1da177e4 | 996 | tophys_r1 %r29 |
1da177e4 LT |
997 | |
998 | /* Restore space id's and special cr's from PT_REGS | |
896a3756 GG |
999 | * structure pointed to by r29 |
1000 | */ | |
1da177e4 LT |
1001 | rest_specials %r29 |
1002 | ||
896a3756 GG |
1003 | /* IMPORTANT: rest_stack restores r29 last (we are using it)! |
1004 | * It also restores r1 and r30. | |
1005 | */ | |
1da177e4 LT |
1006 | rest_stack |
1007 | ||
1008 | rfi | |
1009 | nop | |
1010 | nop | |
1011 | nop | |
1012 | nop | |
1013 | nop | |
1014 | nop | |
1015 | nop | |
1016 | nop | |
1017 | ||
50a34dbd KM |
1018 | #ifndef CONFIG_PREEMPT |
1019 | # define intr_do_preempt intr_restore | |
1020 | #endif /* !CONFIG_PREEMPT */ | |
1021 | ||
1da177e4 LT |
1022 | .import schedule,code |
1023 | intr_do_resched: | |
50a34dbd KM |
1024 | /* Only call schedule on return to userspace. If we're returning |
1025 | * to kernel space, we may schedule if CONFIG_PREEMPT, otherwise | |
1026 | * we jump back to intr_restore. | |
1027 | */ | |
1da177e4 | 1028 | LDREG PT_IASQ0(%r16), %r20 |
50a34dbd | 1029 | CMPIB= 0, %r20, intr_do_preempt |
1da177e4 LT |
1030 | nop |
1031 | LDREG PT_IASQ1(%r16), %r20 | |
50a34dbd | 1032 | CMPIB= 0, %r20, intr_do_preempt |
1da177e4 LT |
1033 | nop |
1034 | ||
413059f2 | 1035 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1036 | ldo -16(%r30),%r29 /* Reference param save area */ |
1037 | #endif | |
1038 | ||
1039 | ldil L%intr_check_sig, %r2 | |
99ac7947 | 1040 | #ifndef CONFIG_64BIT |
1da177e4 | 1041 | b schedule |
99ac7947 RC |
1042 | #else |
1043 | load32 schedule, %r20 | |
1044 | bv %r0(%r20) | |
1045 | #endif | |
1da177e4 LT |
1046 | ldo R%intr_check_sig(%r2), %r2 |
1047 | ||
50a34dbd KM |
1048 | /* preempt the current task on returning to kernel |
1049 | * mode from an interrupt, iff need_resched is set, | |
1050 | * and preempt_count is 0. otherwise, we continue on | |
1051 | * our merry way back to the current running task. | |
1052 | */ | |
1053 | #ifdef CONFIG_PREEMPT | |
1054 | .import preempt_schedule_irq,code | |
1055 | intr_do_preempt: | |
1056 | rsm PSW_SM_I, %r0 /* disable interrupts */ | |
1057 | ||
1058 | /* current_thread_info()->preempt_count */ | |
1059 | mfctl %cr30, %r1 | |
1060 | LDREG TI_PRE_COUNT(%r1), %r19 | |
1061 | CMPIB<> 0, %r19, intr_restore /* if preempt_count > 0 */ | |
1062 | nop /* prev insn branched backwards */ | |
1063 | ||
1064 | /* check if we interrupted a critical path */ | |
1065 | LDREG PT_PSW(%r16), %r20 | |
1066 | bb,<,n %r20, 31 - PSW_SM_I, intr_restore | |
1067 | nop | |
1068 | ||
1069 | BL preempt_schedule_irq, %r2 | |
1070 | nop | |
1071 | ||
1072 | b intr_restore /* ssm PSW_SM_I done by intr_restore */ | |
1073 | #endif /* CONFIG_PREEMPT */ | |
1da177e4 LT |
1074 | |
1075 | .import do_signal,code | |
1076 | intr_do_signal: | |
1077 | /* | |
1078 | This check is critical to having LWS | |
1079 | working. The IASQ is zero on the gateway | |
1080 | page and we cannot deliver any signals until | |
1081 | we get off the gateway page. | |
1082 | ||
1083 | Only do signals if we are returning to user space | |
1084 | */ | |
1085 | LDREG PT_IASQ0(%r16), %r20 | |
1086 | CMPIB= 0,%r20,intr_restore /* backward */ | |
1087 | nop | |
1088 | LDREG PT_IASQ1(%r16), %r20 | |
1089 | CMPIB= 0,%r20,intr_restore /* backward */ | |
1090 | nop | |
1091 | ||
1092 | copy %r0, %r24 /* unsigned long in_syscall */ | |
1093 | copy %r16, %r25 /* struct pt_regs *regs */ | |
413059f2 | 1094 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1095 | ldo -16(%r30),%r29 /* Reference param save area */ |
1096 | #endif | |
1097 | ||
1098 | BL do_signal,%r2 | |
1099 | copy %r0, %r26 /* sigset_t *oldset = NULL */ | |
1100 | ||
1101 | b intr_check_sig | |
1102 | nop | |
1103 | ||
1104 | /* | |
1105 | * External interrupts. | |
1106 | */ | |
1107 | ||
1108 | intr_extint: | |
1109 | CMPIB=,n 0,%r16,1f | |
1110 | get_stack_use_cr30 | |
1111 | b,n 3f | |
1112 | ||
1113 | 1: | |
1114 | #if 0 /* Interrupt Stack support not working yet! */ | |
1115 | mfctl %cr31,%r1 | |
1116 | copy %r30,%r17 | |
1117 | /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/ | |
413059f2 | 1118 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1119 | depdi 0,63,15,%r17 |
1120 | #else | |
1121 | depi 0,31,15,%r17 | |
1122 | #endif | |
1123 | CMPB=,n %r1,%r17,2f | |
1124 | get_stack_use_cr31 | |
1125 | b,n 3f | |
1126 | #endif | |
1127 | 2: | |
1128 | get_stack_use_r30 | |
1129 | ||
1130 | 3: | |
1131 | save_specials %r29 | |
1132 | virt_map | |
1133 | save_general %r29 | |
1134 | ||
1135 | ldo PT_FR0(%r29), %r24 | |
1136 | save_fp %r24 | |
1137 | ||
1138 | loadgp | |
1139 | ||
1140 | copy %r29, %r26 /* arg0 is pt_regs */ | |
1141 | copy %r29, %r16 /* save pt_regs */ | |
1142 | ||
1143 | ldil L%intr_return, %r2 | |
1144 | ||
413059f2 | 1145 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1146 | ldo -16(%r30),%r29 /* Reference param save area */ |
1147 | #endif | |
1148 | ||
1149 | b do_cpu_irq_mask | |
1150 | ldo R%intr_return(%r2), %r2 /* return to intr_return, not here */ | |
1151 | ||
1152 | ||
1153 | /* Generic interruptions (illegal insn, unaligned, page fault, etc) */ | |
1154 | ||
1155 | .export intr_save, code /* for os_hpmc */ | |
1156 | ||
1157 | intr_save: | |
1158 | mfsp %sr7,%r16 | |
1159 | CMPIB=,n 0,%r16,1f | |
1160 | get_stack_use_cr30 | |
1161 | b 2f | |
1162 | copy %r8,%r26 | |
1163 | ||
1164 | 1: | |
1165 | get_stack_use_r30 | |
1166 | copy %r8,%r26 | |
1167 | ||
1168 | 2: | |
1169 | save_specials %r29 | |
1170 | ||
1171 | /* If this trap is a itlb miss, skip saving/adjusting isr/ior */ | |
1172 | ||
1173 | /* | |
1174 | * FIXME: 1) Use a #define for the hardwired "6" below (and in | |
1175 | * traps.c. | |
1176 | * 2) Once we start executing code above 4 Gb, we need | |
1177 | * to adjust iasq/iaoq here in the same way we | |
1178 | * adjust isr/ior below. | |
1179 | */ | |
1180 | ||
1181 | CMPIB=,n 6,%r26,skip_save_ior | |
1182 | ||
1da177e4 LT |
1183 | |
1184 | mfctl %cr20, %r16 /* isr */ | |
896a3756 | 1185 | nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */ |
1da177e4 LT |
1186 | mfctl %cr21, %r17 /* ior */ |
1187 | ||
896a3756 | 1188 | |
413059f2 | 1189 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1190 | /* |
1191 | * If the interrupted code was running with W bit off (32 bit), | |
1192 | * clear the b bits (bits 0 & 1) in the ior. | |
896a3756 | 1193 | * save_specials left ipsw value in r8 for us to test. |
1da177e4 LT |
1194 | */ |
1195 | extrd,u,*<> %r8,PSW_W_BIT,1,%r0 | |
1196 | depdi 0,1,2,%r17 | |
1197 | ||
1198 | /* | |
1199 | * FIXME: This code has hardwired assumptions about the split | |
1200 | * between space bits and offset bits. This will change | |
1201 | * when we allow alternate page sizes. | |
1202 | */ | |
1203 | ||
1204 | /* adjust isr/ior. */ | |
2fd83038 HD |
1205 | extrd,u %r16,63,SPACEID_SHIFT,%r1 /* get high bits from isr for ior */ |
1206 | depd %r1,31,SPACEID_SHIFT,%r17 /* deposit them into ior */ | |
1207 | depdi 0,63,SPACEID_SHIFT,%r16 /* clear them from isr */ | |
1da177e4 LT |
1208 | #endif |
1209 | STREG %r16, PT_ISR(%r29) | |
1210 | STREG %r17, PT_IOR(%r29) | |
1211 | ||
1212 | ||
1213 | skip_save_ior: | |
1214 | virt_map | |
1215 | save_general %r29 | |
1216 | ||
1217 | ldo PT_FR0(%r29), %r25 | |
1218 | save_fp %r25 | |
1219 | ||
1220 | loadgp | |
1221 | ||
1222 | copy %r29, %r25 /* arg1 is pt_regs */ | |
413059f2 | 1223 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1224 | ldo -16(%r30),%r29 /* Reference param save area */ |
1225 | #endif | |
1226 | ||
1227 | ldil L%intr_check_sig, %r2 | |
1228 | copy %r25, %r16 /* save pt_regs */ | |
1229 | ||
1230 | b handle_interruption | |
1231 | ldo R%intr_check_sig(%r2), %r2 | |
1232 | ||
1233 | ||
1234 | /* | |
1235 | * Note for all tlb miss handlers: | |
1236 | * | |
1237 | * cr24 contains a pointer to the kernel address space | |
1238 | * page directory. | |
1239 | * | |
1240 | * cr25 contains a pointer to the current user address | |
1241 | * space page directory. | |
1242 | * | |
1243 | * sr3 will contain the space id of the user address space | |
1244 | * of the current running thread while that thread is | |
1245 | * running in the kernel. | |
1246 | */ | |
1247 | ||
1248 | /* | |
1249 | * register number allocations. Note that these are all | |
1250 | * in the shadowed registers | |
1251 | */ | |
1252 | ||
1253 | t0 = r1 /* temporary register 0 */ | |
1254 | va = r8 /* virtual address for which the trap occured */ | |
1255 | t1 = r9 /* temporary register 1 */ | |
1256 | pte = r16 /* pte/phys page # */ | |
1257 | prot = r17 /* prot bits */ | |
1258 | spc = r24 /* space for which the trap occured */ | |
1259 | ptp = r25 /* page directory/page table pointer */ | |
1260 | ||
413059f2 | 1261 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1262 | |
1263 | dtlb_miss_20w: | |
1264 | space_adjust spc,va,t0 | |
1265 | get_pgd spc,ptp | |
1266 | space_check spc,t0,dtlb_fault | |
1267 | ||
1268 | L3_ptep ptp,pte,t0,va,dtlb_check_alias_20w | |
1269 | ||
1270 | update_ptep ptp,pte,t0,t1 | |
1271 | ||
1272 | make_insert_tlb spc,pte,prot | |
1273 | ||
1274 | idtlbt pte,prot | |
1275 | ||
1276 | rfir | |
1277 | nop | |
1278 | ||
1279 | dtlb_check_alias_20w: | |
1280 | do_alias spc,t0,t1,va,pte,prot,dtlb_fault | |
1281 | ||
1282 | idtlbt pte,prot | |
1283 | ||
1284 | rfir | |
1285 | nop | |
1286 | ||
1287 | nadtlb_miss_20w: | |
1288 | space_adjust spc,va,t0 | |
1289 | get_pgd spc,ptp | |
1290 | space_check spc,t0,nadtlb_fault | |
1291 | ||
1292 | L3_ptep ptp,pte,t0,va,nadtlb_check_flush_20w | |
1293 | ||
1294 | update_ptep ptp,pte,t0,t1 | |
1295 | ||
1296 | make_insert_tlb spc,pte,prot | |
1297 | ||
1298 | idtlbt pte,prot | |
1299 | ||
1300 | rfir | |
1301 | nop | |
1302 | ||
1303 | nadtlb_check_flush_20w: | |
1304 | bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate | |
1305 | ||
1306 | /* Insert a "flush only" translation */ | |
1307 | ||
1308 | depdi,z 7,7,3,prot | |
1309 | depdi 1,10,1,prot | |
1310 | ||
1311 | /* Get rid of prot bits and convert to page addr for idtlbt */ | |
1312 | ||
1313 | depdi 0,63,12,pte | |
1314 | extrd,u pte,56,52,pte | |
1315 | idtlbt pte,prot | |
1316 | ||
1317 | rfir | |
1318 | nop | |
1319 | ||
1320 | #else | |
1321 | ||
1322 | dtlb_miss_11: | |
1323 | get_pgd spc,ptp | |
1324 | ||
1325 | space_check spc,t0,dtlb_fault | |
1326 | ||
1327 | L2_ptep ptp,pte,t0,va,dtlb_check_alias_11 | |
1328 | ||
1329 | update_ptep ptp,pte,t0,t1 | |
1330 | ||
1331 | make_insert_tlb_11 spc,pte,prot | |
1332 | ||
1333 | mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ | |
1334 | mtsp spc,%sr1 | |
1335 | ||
1336 | idtlba pte,(%sr1,va) | |
1337 | idtlbp prot,(%sr1,va) | |
1338 | ||
1339 | mtsp t0, %sr1 /* Restore sr1 */ | |
1340 | ||
1341 | rfir | |
1342 | nop | |
1343 | ||
1344 | dtlb_check_alias_11: | |
1345 | ||
1346 | /* Check to see if fault is in the temporary alias region */ | |
1347 | ||
1348 | cmpib,<>,n 0,spc,dtlb_fault /* forward */ | |
1349 | ldil L%(TMPALIAS_MAP_START),t0 | |
1350 | copy va,t1 | |
1351 | depwi 0,31,23,t1 | |
1352 | cmpb,<>,n t0,t1,dtlb_fault /* forward */ | |
1353 | ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),prot | |
1354 | depw,z prot,8,7,prot | |
1355 | ||
1356 | /* | |
1357 | * OK, it is in the temp alias region, check whether "from" or "to". | |
1358 | * Check "subtle" note in pacache.S re: r23/r26. | |
1359 | */ | |
1360 | ||
1361 | extrw,u,= va,9,1,r0 | |
1362 | or,tr %r23,%r0,pte /* If "from" use "from" page */ | |
1363 | or %r26,%r0,pte /* else "to", use "to" page */ | |
1364 | ||
1365 | idtlba pte,(va) | |
1366 | idtlbp prot,(va) | |
1367 | ||
1368 | rfir | |
1369 | nop | |
1370 | ||
1371 | nadtlb_miss_11: | |
1372 | get_pgd spc,ptp | |
1373 | ||
1374 | space_check spc,t0,nadtlb_fault | |
1375 | ||
1376 | L2_ptep ptp,pte,t0,va,nadtlb_check_flush_11 | |
1377 | ||
1378 | update_ptep ptp,pte,t0,t1 | |
1379 | ||
1380 | make_insert_tlb_11 spc,pte,prot | |
1381 | ||
1382 | ||
1383 | mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ | |
1384 | mtsp spc,%sr1 | |
1385 | ||
1386 | idtlba pte,(%sr1,va) | |
1387 | idtlbp prot,(%sr1,va) | |
1388 | ||
1389 | mtsp t0, %sr1 /* Restore sr1 */ | |
1390 | ||
1391 | rfir | |
1392 | nop | |
1393 | ||
1394 | nadtlb_check_flush_11: | |
1395 | bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate | |
1396 | ||
1397 | /* Insert a "flush only" translation */ | |
1398 | ||
1399 | zdepi 7,7,3,prot | |
1400 | depi 1,10,1,prot | |
1401 | ||
1402 | /* Get rid of prot bits and convert to page addr for idtlba */ | |
1403 | ||
1404 | depi 0,31,12,pte | |
1405 | extru pte,24,25,pte | |
1406 | ||
1407 | mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ | |
1408 | mtsp spc,%sr1 | |
1409 | ||
1410 | idtlba pte,(%sr1,va) | |
1411 | idtlbp prot,(%sr1,va) | |
1412 | ||
1413 | mtsp t0, %sr1 /* Restore sr1 */ | |
1414 | ||
1415 | rfir | |
1416 | nop | |
1417 | ||
1418 | dtlb_miss_20: | |
1419 | space_adjust spc,va,t0 | |
1420 | get_pgd spc,ptp | |
1421 | space_check spc,t0,dtlb_fault | |
1422 | ||
1423 | L2_ptep ptp,pte,t0,va,dtlb_check_alias_20 | |
1424 | ||
1425 | update_ptep ptp,pte,t0,t1 | |
1426 | ||
1427 | make_insert_tlb spc,pte,prot | |
1428 | ||
1429 | f_extend pte,t0 | |
1430 | ||
1431 | idtlbt pte,prot | |
1432 | ||
1433 | rfir | |
1434 | nop | |
1435 | ||
1436 | dtlb_check_alias_20: | |
1437 | do_alias spc,t0,t1,va,pte,prot,dtlb_fault | |
1438 | ||
1439 | idtlbt pte,prot | |
1440 | ||
1441 | rfir | |
1442 | nop | |
1443 | ||
1444 | nadtlb_miss_20: | |
1445 | get_pgd spc,ptp | |
1446 | ||
1447 | space_check spc,t0,nadtlb_fault | |
1448 | ||
1449 | L2_ptep ptp,pte,t0,va,nadtlb_check_flush_20 | |
1450 | ||
1451 | update_ptep ptp,pte,t0,t1 | |
1452 | ||
1453 | make_insert_tlb spc,pte,prot | |
1454 | ||
1455 | f_extend pte,t0 | |
1456 | ||
1457 | idtlbt pte,prot | |
1458 | ||
1459 | rfir | |
1460 | nop | |
1461 | ||
1462 | nadtlb_check_flush_20: | |
1463 | bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate | |
1464 | ||
1465 | /* Insert a "flush only" translation */ | |
1466 | ||
1467 | depdi,z 7,7,3,prot | |
1468 | depdi 1,10,1,prot | |
1469 | ||
1470 | /* Get rid of prot bits and convert to page addr for idtlbt */ | |
1471 | ||
1472 | depdi 0,63,12,pte | |
1473 | extrd,u pte,56,32,pte | |
1474 | idtlbt pte,prot | |
1475 | ||
1476 | rfir | |
1477 | nop | |
1478 | #endif | |
1479 | ||
1480 | nadtlb_emulate: | |
1481 | ||
1482 | /* | |
1483 | * Non access misses can be caused by fdc,fic,pdc,lpa,probe and | |
1484 | * probei instructions. We don't want to fault for these | |
1485 | * instructions (not only does it not make sense, it can cause | |
1486 | * deadlocks, since some flushes are done with the mmap | |
1487 | * semaphore held). If the translation doesn't exist, we can't | |
1488 | * insert a translation, so have to emulate the side effects | |
1489 | * of the instruction. Since we don't insert a translation | |
1490 | * we can get a lot of faults during a flush loop, so it makes | |
1491 | * sense to try to do it here with minimum overhead. We only | |
1492 | * emulate fdc,fic,pdc,probew,prober instructions whose base | |
1493 | * and index registers are not shadowed. We defer everything | |
1494 | * else to the "slow" path. | |
1495 | */ | |
1496 | ||
1497 | mfctl %cr19,%r9 /* Get iir */ | |
1498 | ||
1499 | /* PA 2.0 Arch Ref. Book pg 382 has a good description of the insn bits. | |
1500 | Checks for fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw */ | |
1501 | ||
1502 | /* Checks for fdc,fdce,pdc,"fic,4f" only */ | |
1503 | ldi 0x280,%r16 | |
1504 | and %r9,%r16,%r17 | |
1505 | cmpb,<>,n %r16,%r17,nadtlb_probe_check | |
1506 | bb,>=,n %r9,26,nadtlb_nullify /* m bit not set, just nullify */ | |
1507 | BL get_register,%r25 | |
1508 | extrw,u %r9,15,5,%r8 /* Get index register # */ | |
1509 | CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */ | |
1510 | copy %r1,%r24 | |
1511 | BL get_register,%r25 | |
1512 | extrw,u %r9,10,5,%r8 /* Get base register # */ | |
1513 | CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */ | |
1514 | BL set_register,%r25 | |
1515 | add,l %r1,%r24,%r1 /* doesn't affect c/b bits */ | |
1516 | ||
1517 | nadtlb_nullify: | |
896a3756 | 1518 | mfctl %ipsw,%r8 |
1da177e4 LT |
1519 | ldil L%PSW_N,%r9 |
1520 | or %r8,%r9,%r8 /* Set PSW_N */ | |
896a3756 | 1521 | mtctl %r8,%ipsw |
1da177e4 LT |
1522 | |
1523 | rfir | |
1524 | nop | |
1525 | ||
1526 | /* | |
1527 | When there is no translation for the probe address then we | |
1528 | must nullify the insn and return zero in the target regsiter. | |
1529 | This will indicate to the calling code that it does not have | |
1530 | write/read privileges to this address. | |
1531 | ||
1532 | This should technically work for prober and probew in PA 1.1, | |
1533 | and also probe,r and probe,w in PA 2.0 | |
1534 | ||
1535 | WARNING: USE ONLY NON-SHADOW REGISTERS WITH PROBE INSN! | |
1536 | THE SLOW-PATH EMULATION HAS NOT BEEN WRITTEN YET. | |
1537 | ||
1538 | */ | |
1539 | nadtlb_probe_check: | |
1540 | ldi 0x80,%r16 | |
1541 | and %r9,%r16,%r17 | |
1542 | cmpb,<>,n %r16,%r17,nadtlb_fault /* Must be probe,[rw]*/ | |
1543 | BL get_register,%r25 /* Find the target register */ | |
1544 | extrw,u %r9,31,5,%r8 /* Get target register */ | |
1545 | CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */ | |
1546 | BL set_register,%r25 | |
1547 | copy %r0,%r1 /* Write zero to target register */ | |
1548 | b nadtlb_nullify /* Nullify return insn */ | |
1549 | nop | |
1550 | ||
1551 | ||
413059f2 | 1552 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1553 | itlb_miss_20w: |
1554 | ||
1555 | /* | |
1556 | * I miss is a little different, since we allow users to fault | |
1557 | * on the gateway page which is in the kernel address space. | |
1558 | */ | |
1559 | ||
1560 | space_adjust spc,va,t0 | |
1561 | get_pgd spc,ptp | |
1562 | space_check spc,t0,itlb_fault | |
1563 | ||
1564 | L3_ptep ptp,pte,t0,va,itlb_fault | |
1565 | ||
1566 | update_ptep ptp,pte,t0,t1 | |
1567 | ||
1568 | make_insert_tlb spc,pte,prot | |
1569 | ||
1570 | iitlbt pte,prot | |
1571 | ||
1572 | rfir | |
1573 | nop | |
1574 | ||
1575 | #else | |
1576 | ||
1577 | itlb_miss_11: | |
1578 | get_pgd spc,ptp | |
1579 | ||
1580 | space_check spc,t0,itlb_fault | |
1581 | ||
1582 | L2_ptep ptp,pte,t0,va,itlb_fault | |
1583 | ||
1584 | update_ptep ptp,pte,t0,t1 | |
1585 | ||
1586 | make_insert_tlb_11 spc,pte,prot | |
1587 | ||
1588 | mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ | |
1589 | mtsp spc,%sr1 | |
1590 | ||
1591 | iitlba pte,(%sr1,va) | |
1592 | iitlbp prot,(%sr1,va) | |
1593 | ||
1594 | mtsp t0, %sr1 /* Restore sr1 */ | |
1595 | ||
1596 | rfir | |
1597 | nop | |
1598 | ||
1599 | itlb_miss_20: | |
1600 | get_pgd spc,ptp | |
1601 | ||
1602 | space_check spc,t0,itlb_fault | |
1603 | ||
1604 | L2_ptep ptp,pte,t0,va,itlb_fault | |
1605 | ||
1606 | update_ptep ptp,pte,t0,t1 | |
1607 | ||
1608 | make_insert_tlb spc,pte,prot | |
1609 | ||
1610 | f_extend pte,t0 | |
1611 | ||
1612 | iitlbt pte,prot | |
1613 | ||
1614 | rfir | |
1615 | nop | |
1616 | ||
1617 | #endif | |
1618 | ||
413059f2 | 1619 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1620 | |
1621 | dbit_trap_20w: | |
1622 | space_adjust spc,va,t0 | |
1623 | get_pgd spc,ptp | |
1624 | space_check spc,t0,dbit_fault | |
1625 | ||
1626 | L3_ptep ptp,pte,t0,va,dbit_fault | |
1627 | ||
1628 | #ifdef CONFIG_SMP | |
1629 | CMPIB=,n 0,spc,dbit_nolock_20w | |
1630 | load32 PA(pa_dbit_lock),t0 | |
1631 | ||
1632 | dbit_spin_20w: | |
64f49532 | 1633 | LDCW 0(t0),t1 |
1da177e4 LT |
1634 | cmpib,= 0,t1,dbit_spin_20w |
1635 | nop | |
1636 | ||
1637 | dbit_nolock_20w: | |
1638 | #endif | |
1639 | update_dirty ptp,pte,t1 | |
1640 | ||
1641 | make_insert_tlb spc,pte,prot | |
1642 | ||
1643 | idtlbt pte,prot | |
1644 | #ifdef CONFIG_SMP | |
1645 | CMPIB=,n 0,spc,dbit_nounlock_20w | |
1646 | ldi 1,t1 | |
1647 | stw t1,0(t0) | |
1648 | ||
1649 | dbit_nounlock_20w: | |
1650 | #endif | |
1651 | ||
1652 | rfir | |
1653 | nop | |
1654 | #else | |
1655 | ||
1656 | dbit_trap_11: | |
1657 | ||
1658 | get_pgd spc,ptp | |
1659 | ||
1660 | space_check spc,t0,dbit_fault | |
1661 | ||
1662 | L2_ptep ptp,pte,t0,va,dbit_fault | |
1663 | ||
1664 | #ifdef CONFIG_SMP | |
1665 | CMPIB=,n 0,spc,dbit_nolock_11 | |
1666 | load32 PA(pa_dbit_lock),t0 | |
1667 | ||
1668 | dbit_spin_11: | |
64f49532 | 1669 | LDCW 0(t0),t1 |
1da177e4 LT |
1670 | cmpib,= 0,t1,dbit_spin_11 |
1671 | nop | |
1672 | ||
1673 | dbit_nolock_11: | |
1674 | #endif | |
1675 | update_dirty ptp,pte,t1 | |
1676 | ||
1677 | make_insert_tlb_11 spc,pte,prot | |
1678 | ||
1679 | mfsp %sr1,t1 /* Save sr1 so we can use it in tlb inserts */ | |
1680 | mtsp spc,%sr1 | |
1681 | ||
1682 | idtlba pte,(%sr1,va) | |
1683 | idtlbp prot,(%sr1,va) | |
1684 | ||
1685 | mtsp t1, %sr1 /* Restore sr1 */ | |
1686 | #ifdef CONFIG_SMP | |
1687 | CMPIB=,n 0,spc,dbit_nounlock_11 | |
1688 | ldi 1,t1 | |
1689 | stw t1,0(t0) | |
1690 | ||
1691 | dbit_nounlock_11: | |
1692 | #endif | |
1693 | ||
1694 | rfir | |
1695 | nop | |
1696 | ||
1697 | dbit_trap_20: | |
1698 | get_pgd spc,ptp | |
1699 | ||
1700 | space_check spc,t0,dbit_fault | |
1701 | ||
1702 | L2_ptep ptp,pte,t0,va,dbit_fault | |
1703 | ||
1704 | #ifdef CONFIG_SMP | |
1705 | CMPIB=,n 0,spc,dbit_nolock_20 | |
1706 | load32 PA(pa_dbit_lock),t0 | |
1707 | ||
1708 | dbit_spin_20: | |
64f49532 | 1709 | LDCW 0(t0),t1 |
1da177e4 LT |
1710 | cmpib,= 0,t1,dbit_spin_20 |
1711 | nop | |
1712 | ||
1713 | dbit_nolock_20: | |
1714 | #endif | |
1715 | update_dirty ptp,pte,t1 | |
1716 | ||
1717 | make_insert_tlb spc,pte,prot | |
1718 | ||
1719 | f_extend pte,t1 | |
1720 | ||
1721 | idtlbt pte,prot | |
1722 | ||
1723 | #ifdef CONFIG_SMP | |
1724 | CMPIB=,n 0,spc,dbit_nounlock_20 | |
1725 | ldi 1,t1 | |
1726 | stw t1,0(t0) | |
1727 | ||
1728 | dbit_nounlock_20: | |
1729 | #endif | |
1730 | ||
1731 | rfir | |
1732 | nop | |
1733 | #endif | |
1734 | ||
1735 | .import handle_interruption,code | |
1736 | ||
1737 | kernel_bad_space: | |
1738 | b intr_save | |
1739 | ldi 31,%r8 /* Use an unused code */ | |
1740 | ||
1741 | dbit_fault: | |
1742 | b intr_save | |
1743 | ldi 20,%r8 | |
1744 | ||
1745 | itlb_fault: | |
1746 | b intr_save | |
1747 | ldi 6,%r8 | |
1748 | ||
1749 | nadtlb_fault: | |
1750 | b intr_save | |
1751 | ldi 17,%r8 | |
1752 | ||
1753 | dtlb_fault: | |
1754 | b intr_save | |
1755 | ldi 15,%r8 | |
1756 | ||
1757 | /* Register saving semantics for system calls: | |
1758 | ||
1759 | %r1 clobbered by system call macro in userspace | |
1760 | %r2 saved in PT_REGS by gateway page | |
1761 | %r3 - %r18 preserved by C code (saved by signal code) | |
1762 | %r19 - %r20 saved in PT_REGS by gateway page | |
1763 | %r21 - %r22 non-standard syscall args | |
1764 | stored in kernel stack by gateway page | |
1765 | %r23 - %r26 arg3-arg0, saved in PT_REGS by gateway page | |
1766 | %r27 - %r30 saved in PT_REGS by gateway page | |
1767 | %r31 syscall return pointer | |
1768 | */ | |
1769 | ||
1770 | /* Floating point registers (FIXME: what do we do with these?) | |
1771 | ||
1772 | %fr0 - %fr3 status/exception, not preserved | |
1773 | %fr4 - %fr7 arguments | |
1774 | %fr8 - %fr11 not preserved by C code | |
1775 | %fr12 - %fr21 preserved by C code | |
1776 | %fr22 - %fr31 not preserved by C code | |
1777 | */ | |
1778 | ||
1779 | .macro reg_save regs | |
1780 | STREG %r3, PT_GR3(\regs) | |
1781 | STREG %r4, PT_GR4(\regs) | |
1782 | STREG %r5, PT_GR5(\regs) | |
1783 | STREG %r6, PT_GR6(\regs) | |
1784 | STREG %r7, PT_GR7(\regs) | |
1785 | STREG %r8, PT_GR8(\regs) | |
1786 | STREG %r9, PT_GR9(\regs) | |
1787 | STREG %r10,PT_GR10(\regs) | |
1788 | STREG %r11,PT_GR11(\regs) | |
1789 | STREG %r12,PT_GR12(\regs) | |
1790 | STREG %r13,PT_GR13(\regs) | |
1791 | STREG %r14,PT_GR14(\regs) | |
1792 | STREG %r15,PT_GR15(\regs) | |
1793 | STREG %r16,PT_GR16(\regs) | |
1794 | STREG %r17,PT_GR17(\regs) | |
1795 | STREG %r18,PT_GR18(\regs) | |
1796 | .endm | |
1797 | ||
1798 | .macro reg_restore regs | |
1799 | LDREG PT_GR3(\regs), %r3 | |
1800 | LDREG PT_GR4(\regs), %r4 | |
1801 | LDREG PT_GR5(\regs), %r5 | |
1802 | LDREG PT_GR6(\regs), %r6 | |
1803 | LDREG PT_GR7(\regs), %r7 | |
1804 | LDREG PT_GR8(\regs), %r8 | |
1805 | LDREG PT_GR9(\regs), %r9 | |
1806 | LDREG PT_GR10(\regs),%r10 | |
1807 | LDREG PT_GR11(\regs),%r11 | |
1808 | LDREG PT_GR12(\regs),%r12 | |
1809 | LDREG PT_GR13(\regs),%r13 | |
1810 | LDREG PT_GR14(\regs),%r14 | |
1811 | LDREG PT_GR15(\regs),%r15 | |
1812 | LDREG PT_GR16(\regs),%r16 | |
1813 | LDREG PT_GR17(\regs),%r17 | |
1814 | LDREG PT_GR18(\regs),%r18 | |
1815 | .endm | |
1816 | ||
1817 | .export sys_fork_wrapper | |
1818 | .export child_return | |
1819 | sys_fork_wrapper: | |
1820 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1 | |
1821 | ldo TASK_REGS(%r1),%r1 | |
1822 | reg_save %r1 | |
1823 | mfctl %cr27, %r3 | |
1824 | STREG %r3, PT_CR27(%r1) | |
1825 | ||
1826 | STREG %r2,-RP_OFFSET(%r30) | |
1827 | ldo FRAME_SIZE(%r30),%r30 | |
413059f2 | 1828 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1829 | ldo -16(%r30),%r29 /* Reference param save area */ |
1830 | #endif | |
1831 | ||
1832 | /* These are call-clobbered registers and therefore | |
1833 | also syscall-clobbered (we hope). */ | |
1834 | STREG %r2,PT_GR19(%r1) /* save for child */ | |
1835 | STREG %r30,PT_GR21(%r1) | |
1836 | ||
1837 | LDREG PT_GR30(%r1),%r25 | |
1838 | copy %r1,%r24 | |
1839 | BL sys_clone,%r2 | |
1840 | ldi SIGCHLD,%r26 | |
1841 | ||
1842 | LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2 | |
1843 | wrapper_exit: | |
1844 | ldo -FRAME_SIZE(%r30),%r30 /* get the stackframe */ | |
1845 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
1846 | ldo TASK_REGS(%r1),%r1 /* get pt regs */ | |
1847 | ||
1848 | LDREG PT_CR27(%r1), %r3 | |
1849 | mtctl %r3, %cr27 | |
1850 | reg_restore %r1 | |
1851 | ||
1852 | /* strace expects syscall # to be preserved in r20 */ | |
1853 | ldi __NR_fork,%r20 | |
1854 | bv %r0(%r2) | |
1855 | STREG %r20,PT_GR20(%r1) | |
1856 | ||
1857 | /* Set the return value for the child */ | |
1858 | child_return: | |
1859 | BL schedule_tail, %r2 | |
1860 | nop | |
1861 | ||
1862 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE-FRAME_SIZE(%r30), %r1 | |
1863 | LDREG TASK_PT_GR19(%r1),%r2 | |
1864 | b wrapper_exit | |
1865 | copy %r0,%r28 | |
1866 | ||
1867 | ||
1868 | .export sys_clone_wrapper | |
1869 | sys_clone_wrapper: | |
1870 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
1871 | ldo TASK_REGS(%r1),%r1 /* get pt regs */ | |
1872 | reg_save %r1 | |
1873 | mfctl %cr27, %r3 | |
1874 | STREG %r3, PT_CR27(%r1) | |
1875 | ||
1876 | STREG %r2,-RP_OFFSET(%r30) | |
1877 | ldo FRAME_SIZE(%r30),%r30 | |
413059f2 | 1878 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1879 | ldo -16(%r30),%r29 /* Reference param save area */ |
1880 | #endif | |
1881 | ||
aa0eecb0 | 1882 | /* WARNING - Clobbers r19 and r21, userspace must save these! */ |
1da177e4 LT |
1883 | STREG %r2,PT_GR19(%r1) /* save for child */ |
1884 | STREG %r30,PT_GR21(%r1) | |
1885 | BL sys_clone,%r2 | |
1886 | copy %r1,%r24 | |
1887 | ||
1888 | b wrapper_exit | |
1889 | LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2 | |
1890 | ||
1891 | .export sys_vfork_wrapper | |
1892 | sys_vfork_wrapper: | |
1893 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
1894 | ldo TASK_REGS(%r1),%r1 /* get pt regs */ | |
1895 | reg_save %r1 | |
1896 | mfctl %cr27, %r3 | |
1897 | STREG %r3, PT_CR27(%r1) | |
1898 | ||
1899 | STREG %r2,-RP_OFFSET(%r30) | |
1900 | ldo FRAME_SIZE(%r30),%r30 | |
413059f2 | 1901 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1902 | ldo -16(%r30),%r29 /* Reference param save area */ |
1903 | #endif | |
1904 | ||
1905 | STREG %r2,PT_GR19(%r1) /* save for child */ | |
1906 | STREG %r30,PT_GR21(%r1) | |
1907 | ||
1908 | BL sys_vfork,%r2 | |
1909 | copy %r1,%r26 | |
1910 | ||
1911 | b wrapper_exit | |
1912 | LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2 | |
1913 | ||
1914 | ||
1915 | .macro execve_wrapper execve | |
1916 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
1917 | ldo TASK_REGS(%r1),%r1 /* get pt regs */ | |
1918 | ||
1919 | /* | |
1920 | * Do we need to save/restore r3-r18 here? | |
1921 | * I don't think so. why would new thread need old | |
1922 | * threads registers? | |
1923 | */ | |
1924 | ||
1925 | /* %arg0 - %arg3 are already saved for us. */ | |
1926 | ||
1927 | STREG %r2,-RP_OFFSET(%r30) | |
1928 | ldo FRAME_SIZE(%r30),%r30 | |
413059f2 | 1929 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1930 | ldo -16(%r30),%r29 /* Reference param save area */ |
1931 | #endif | |
99ac7947 | 1932 | BL \execve,%r2 |
1da177e4 LT |
1933 | copy %r1,%arg0 |
1934 | ||
1935 | ldo -FRAME_SIZE(%r30),%r30 | |
1936 | LDREG -RP_OFFSET(%r30),%r2 | |
1937 | ||
1938 | /* If exec succeeded we need to load the args */ | |
1939 | ||
1940 | ldo -1024(%r0),%r1 | |
1941 | cmpb,>>= %r28,%r1,error_\execve | |
1942 | copy %r2,%r19 | |
1943 | ||
1944 | error_\execve: | |
1945 | bv %r0(%r19) | |
1946 | nop | |
1947 | .endm | |
1948 | ||
1949 | .export sys_execve_wrapper | |
1950 | .import sys_execve | |
1951 | ||
1952 | sys_execve_wrapper: | |
1953 | execve_wrapper sys_execve | |
1954 | ||
413059f2 | 1955 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1956 | .export sys32_execve_wrapper |
1957 | .import sys32_execve | |
1958 | ||
1959 | sys32_execve_wrapper: | |
1960 | execve_wrapper sys32_execve | |
1961 | #endif | |
1962 | ||
1963 | .export sys_rt_sigreturn_wrapper | |
1964 | sys_rt_sigreturn_wrapper: | |
1965 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 | |
1966 | ldo TASK_REGS(%r26),%r26 /* get pt regs */ | |
1967 | /* Don't save regs, we are going to restore them from sigcontext. */ | |
1968 | STREG %r2, -RP_OFFSET(%r30) | |
413059f2 | 1969 | #ifdef CONFIG_64BIT |
1da177e4 LT |
1970 | ldo FRAME_SIZE(%r30), %r30 |
1971 | BL sys_rt_sigreturn,%r2 | |
1972 | ldo -16(%r30),%r29 /* Reference param save area */ | |
1973 | #else | |
1974 | BL sys_rt_sigreturn,%r2 | |
1975 | ldo FRAME_SIZE(%r30), %r30 | |
1976 | #endif | |
1977 | ||
1978 | ldo -FRAME_SIZE(%r30), %r30 | |
1979 | LDREG -RP_OFFSET(%r30), %r2 | |
1980 | ||
1981 | /* FIXME: I think we need to restore a few more things here. */ | |
1982 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
1983 | ldo TASK_REGS(%r1),%r1 /* get pt regs */ | |
1984 | reg_restore %r1 | |
1985 | ||
1986 | /* If the signal was received while the process was blocked on a | |
1987 | * syscall, then r2 will take us to syscall_exit; otherwise r2 will | |
1988 | * take us to syscall_exit_rfi and on to intr_return. | |
1989 | */ | |
1990 | bv %r0(%r2) | |
1991 | LDREG PT_GR28(%r1),%r28 /* reload original r28 for syscall_exit */ | |
1992 | ||
1993 | .export sys_sigaltstack_wrapper | |
1994 | sys_sigaltstack_wrapper: | |
1995 | /* Get the user stack pointer */ | |
1996 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
1997 | ldo TASK_REGS(%r1),%r24 /* get pt regs */ | |
1998 | LDREG TASK_PT_GR30(%r24),%r24 | |
1999 | STREG %r2, -RP_OFFSET(%r30) | |
413059f2 | 2000 | #ifdef CONFIG_64BIT |
1da177e4 LT |
2001 | ldo FRAME_SIZE(%r30), %r30 |
2002 | b,l do_sigaltstack,%r2 | |
2003 | ldo -16(%r30),%r29 /* Reference param save area */ | |
2004 | #else | |
2005 | bl do_sigaltstack,%r2 | |
2006 | ldo FRAME_SIZE(%r30), %r30 | |
2007 | #endif | |
2008 | ||
2009 | ldo -FRAME_SIZE(%r30), %r30 | |
2010 | LDREG -RP_OFFSET(%r30), %r2 | |
2011 | bv %r0(%r2) | |
2012 | nop | |
2013 | ||
413059f2 | 2014 | #ifdef CONFIG_64BIT |
1da177e4 LT |
2015 | .export sys32_sigaltstack_wrapper |
2016 | sys32_sigaltstack_wrapper: | |
2017 | /* Get the user stack pointer */ | |
2018 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r24 | |
2019 | LDREG TASK_PT_GR30(%r24),%r24 | |
2020 | STREG %r2, -RP_OFFSET(%r30) | |
2021 | ldo FRAME_SIZE(%r30), %r30 | |
2022 | b,l do_sigaltstack32,%r2 | |
2023 | ldo -16(%r30),%r29 /* Reference param save area */ | |
2024 | ||
2025 | ldo -FRAME_SIZE(%r30), %r30 | |
2026 | LDREG -RP_OFFSET(%r30), %r2 | |
2027 | bv %r0(%r2) | |
2028 | nop | |
2029 | #endif | |
2030 | ||
2031 | .export sys_rt_sigsuspend_wrapper | |
2032 | sys_rt_sigsuspend_wrapper: | |
2033 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1 | |
2034 | ldo TASK_REGS(%r1),%r24 | |
2035 | reg_save %r24 | |
2036 | ||
2037 | STREG %r2, -RP_OFFSET(%r30) | |
413059f2 | 2038 | #ifdef CONFIG_64BIT |
1da177e4 LT |
2039 | ldo FRAME_SIZE(%r30), %r30 |
2040 | b,l sys_rt_sigsuspend,%r2 | |
2041 | ldo -16(%r30),%r29 /* Reference param save area */ | |
2042 | #else | |
2043 | bl sys_rt_sigsuspend,%r2 | |
2044 | ldo FRAME_SIZE(%r30), %r30 | |
2045 | #endif | |
2046 | ||
2047 | ldo -FRAME_SIZE(%r30), %r30 | |
2048 | LDREG -RP_OFFSET(%r30), %r2 | |
2049 | ||
2050 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1 | |
2051 | ldo TASK_REGS(%r1),%r1 | |
2052 | reg_restore %r1 | |
2053 | ||
2054 | bv %r0(%r2) | |
2055 | nop | |
2056 | ||
2057 | .export syscall_exit | |
2058 | syscall_exit: | |
2059 | ||
2060 | /* NOTE: HP-UX syscalls also come through here | |
2061 | * after hpux_syscall_exit fixes up return | |
2062 | * values. */ | |
2063 | ||
2064 | /* NOTE: Not all syscalls exit this way. rt_sigreturn will exit | |
2065 | * via syscall_exit_rfi if the signal was received while the process | |
2066 | * was running. | |
2067 | */ | |
2068 | ||
2069 | /* save return value now */ | |
2070 | ||
2071 | mfctl %cr30, %r1 | |
2072 | LDREG TI_TASK(%r1),%r1 | |
2073 | STREG %r28,TASK_PT_GR28(%r1) | |
2074 | ||
2075 | #ifdef CONFIG_HPUX | |
2076 | ||
2077 | /* <linux/personality.h> cannot be easily included */ | |
2078 | #define PER_HPUX 0x10 | |
2079 | LDREG TASK_PERSONALITY(%r1),%r19 | |
2080 | ||
2081 | /* We can't use "CMPIB<> PER_HPUX" since "im5" field is sign extended */ | |
2082 | ldo -PER_HPUX(%r19), %r19 | |
2083 | CMPIB<>,n 0,%r19,1f | |
2084 | ||
2085 | /* Save other hpux returns if personality is PER_HPUX */ | |
2086 | STREG %r22,TASK_PT_GR22(%r1) | |
2087 | STREG %r29,TASK_PT_GR29(%r1) | |
2088 | 1: | |
2089 | ||
2090 | #endif /* CONFIG_HPUX */ | |
2091 | ||
2092 | /* Seems to me that dp could be wrong here, if the syscall involved | |
2093 | * calling a module, and nothing got round to restoring dp on return. | |
2094 | */ | |
2095 | loadgp | |
2096 | ||
2097 | syscall_check_bh: | |
2098 | ||
2099 | /* Check for software interrupts */ | |
2100 | ||
2101 | .import irq_stat,data | |
2102 | ||
2103 | load32 irq_stat,%r19 | |
2104 | ||
2105 | #ifdef CONFIG_SMP | |
2106 | /* sched.h: int processor */ | |
2107 | /* %r26 is used as scratch register to index into irq_stat[] */ | |
2108 | ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */ | |
2109 | ||
2110 | /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */ | |
3d73cf5e | 2111 | SHLREG %r26,L1_CACHE_SHIFT,%r20 |
1da177e4 LT |
2112 | add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ |
2113 | #endif /* CONFIG_SMP */ | |
2114 | ||
1da177e4 LT |
2115 | syscall_check_resched: |
2116 | ||
2117 | /* check for reschedule */ | |
2118 | ||
2119 | LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19 /* long */ | |
2120 | bb,<,n %r19, 31-TIF_NEED_RESCHED, syscall_do_resched /* forward */ | |
2121 | ||
2122 | syscall_check_sig: | |
2123 | LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19 /* get ti flags */ | |
2124 | bb,<,n %r19, 31-TIF_SIGPENDING, syscall_do_signal /* forward */ | |
2125 | ||
2126 | syscall_restore: | |
2127 | /* Are we being ptraced? */ | |
2128 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
2129 | ||
2130 | LDREG TASK_PTRACE(%r1), %r19 | |
2131 | bb,< %r19,31,syscall_restore_rfi | |
2132 | nop | |
2133 | ||
2134 | ldo TASK_PT_FR31(%r1),%r19 /* reload fpregs */ | |
2135 | rest_fp %r19 | |
2136 | ||
2137 | LDREG TASK_PT_SAR(%r1),%r19 /* restore SAR */ | |
2138 | mtsar %r19 | |
2139 | ||
2140 | LDREG TASK_PT_GR2(%r1),%r2 /* restore user rp */ | |
2141 | LDREG TASK_PT_GR19(%r1),%r19 | |
2142 | LDREG TASK_PT_GR20(%r1),%r20 | |
2143 | LDREG TASK_PT_GR21(%r1),%r21 | |
2144 | LDREG TASK_PT_GR22(%r1),%r22 | |
2145 | LDREG TASK_PT_GR23(%r1),%r23 | |
2146 | LDREG TASK_PT_GR24(%r1),%r24 | |
2147 | LDREG TASK_PT_GR25(%r1),%r25 | |
2148 | LDREG TASK_PT_GR26(%r1),%r26 | |
2149 | LDREG TASK_PT_GR27(%r1),%r27 /* restore user dp */ | |
2150 | LDREG TASK_PT_GR28(%r1),%r28 /* syscall return value */ | |
2151 | LDREG TASK_PT_GR29(%r1),%r29 | |
2152 | LDREG TASK_PT_GR31(%r1),%r31 /* restore syscall rp */ | |
2153 | ||
2154 | /* NOTE: We use rsm/ssm pair to make this operation atomic */ | |
2155 | rsm PSW_SM_I, %r0 | |
2156 | LDREG TASK_PT_GR30(%r1),%r30 /* restore user sp */ | |
2157 | mfsp %sr3,%r1 /* Get users space id */ | |
2158 | mtsp %r1,%sr7 /* Restore sr7 */ | |
2159 | ssm PSW_SM_I, %r0 | |
2160 | ||
2161 | /* Set sr2 to zero for userspace syscalls to work. */ | |
2162 | mtsp %r0,%sr2 | |
2163 | mtsp %r1,%sr4 /* Restore sr4 */ | |
2164 | mtsp %r1,%sr5 /* Restore sr5 */ | |
2165 | mtsp %r1,%sr6 /* Restore sr6 */ | |
2166 | ||
2167 | depi 3,31,2,%r31 /* ensure return to user mode. */ | |
2168 | ||
413059f2 | 2169 | #ifdef CONFIG_64BIT |
1da177e4 LT |
2170 | /* decide whether to reset the wide mode bit |
2171 | * | |
2172 | * For a syscall, the W bit is stored in the lowest bit | |
2173 | * of sp. Extract it and reset W if it is zero */ | |
2174 | extrd,u,*<> %r30,63,1,%r1 | |
2175 | rsm PSW_SM_W, %r0 | |
2176 | /* now reset the lowest bit of sp if it was set */ | |
2177 | xor %r30,%r1,%r30 | |
2178 | #endif | |
2179 | be,n 0(%sr3,%r31) /* return to user space */ | |
2180 | ||
2181 | /* We have to return via an RFI, so that PSW T and R bits can be set | |
2182 | * appropriately. | |
2183 | * This sets up pt_regs so we can return via intr_restore, which is not | |
2184 | * the most efficient way of doing things, but it works. | |
2185 | */ | |
2186 | syscall_restore_rfi: | |
2187 | ldo -1(%r0),%r2 /* Set recovery cntr to -1 */ | |
2188 | mtctl %r2,%cr0 /* for immediate trap */ | |
2189 | LDREG TASK_PT_PSW(%r1),%r2 /* Get old PSW */ | |
2190 | ldi 0x0b,%r20 /* Create new PSW */ | |
2191 | depi -1,13,1,%r20 /* C, Q, D, and I bits */ | |
2192 | ||
2193 | /* The values of PA_SINGLESTEP_BIT and PA_BLOCKSTEP_BIT are | |
2194 | * set in include/linux/ptrace.h and converted to PA bitmap | |
2195 | * numbers in asm-offsets.c */ | |
2196 | ||
2197 | /* if ((%r19.PA_SINGLESTEP_BIT)) { %r20.27=1} */ | |
2198 | extru,= %r19,PA_SINGLESTEP_BIT,1,%r0 | |
2199 | depi -1,27,1,%r20 /* R bit */ | |
2200 | ||
2201 | /* if ((%r19.PA_BLOCKSTEP_BIT)) { %r20.7=1} */ | |
2202 | extru,= %r19,PA_BLOCKSTEP_BIT,1,%r0 | |
2203 | depi -1,7,1,%r20 /* T bit */ | |
2204 | ||
2205 | STREG %r20,TASK_PT_PSW(%r1) | |
2206 | ||
2207 | /* Always store space registers, since sr3 can be changed (e.g. fork) */ | |
2208 | ||
2209 | mfsp %sr3,%r25 | |
2210 | STREG %r25,TASK_PT_SR3(%r1) | |
2211 | STREG %r25,TASK_PT_SR4(%r1) | |
2212 | STREG %r25,TASK_PT_SR5(%r1) | |
2213 | STREG %r25,TASK_PT_SR6(%r1) | |
2214 | STREG %r25,TASK_PT_SR7(%r1) | |
2215 | STREG %r25,TASK_PT_IASQ0(%r1) | |
2216 | STREG %r25,TASK_PT_IASQ1(%r1) | |
2217 | ||
2218 | /* XXX W bit??? */ | |
2219 | /* Now if old D bit is clear, it means we didn't save all registers | |
2220 | * on syscall entry, so do that now. This only happens on TRACEME | |
2221 | * calls, or if someone attached to us while we were on a syscall. | |
2222 | * We could make this more efficient by not saving r3-r18, but | |
2223 | * then we wouldn't be able to use the common intr_restore path. | |
2224 | * It is only for traced processes anyway, so performance is not | |
2225 | * an issue. | |
2226 | */ | |
2227 | bb,< %r2,30,pt_regs_ok /* Branch if D set */ | |
2228 | ldo TASK_REGS(%r1),%r25 | |
2229 | reg_save %r25 /* Save r3 to r18 */ | |
2230 | ||
2231 | /* Save the current sr */ | |
2232 | mfsp %sr0,%r2 | |
2233 | STREG %r2,TASK_PT_SR0(%r1) | |
2234 | ||
2235 | /* Save the scratch sr */ | |
2236 | mfsp %sr1,%r2 | |
2237 | STREG %r2,TASK_PT_SR1(%r1) | |
2238 | ||
2239 | /* sr2 should be set to zero for userspace syscalls */ | |
2240 | STREG %r0,TASK_PT_SR2(%r1) | |
2241 | ||
2242 | pt_regs_ok: | |
2243 | LDREG TASK_PT_GR31(%r1),%r2 | |
2244 | depi 3,31,2,%r2 /* ensure return to user mode. */ | |
2245 | STREG %r2,TASK_PT_IAOQ0(%r1) | |
2246 | ldo 4(%r2),%r2 | |
2247 | STREG %r2,TASK_PT_IAOQ1(%r1) | |
2248 | copy %r25,%r16 | |
2249 | b intr_restore | |
2250 | nop | |
2251 | ||
1da177e4 LT |
2252 | .import schedule,code |
2253 | syscall_do_resched: | |
2254 | BL schedule,%r2 | |
413059f2 | 2255 | #ifdef CONFIG_64BIT |
1da177e4 LT |
2256 | ldo -16(%r30),%r29 /* Reference param save area */ |
2257 | #else | |
2258 | nop | |
2259 | #endif | |
2260 | b syscall_check_bh /* if resched, we start over again */ | |
2261 | nop | |
2262 | ||
2263 | .import do_signal,code | |
2264 | syscall_do_signal: | |
2265 | /* Save callee-save registers (for sigcontext). | |
2266 | FIXME: After this point the process structure should be | |
2267 | consistent with all the relevant state of the process | |
2268 | before the syscall. We need to verify this. */ | |
2269 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
2270 | ldo TASK_REGS(%r1), %r25 /* struct pt_regs *regs */ | |
2271 | reg_save %r25 | |
2272 | ||
2273 | ldi 1, %r24 /* unsigned long in_syscall */ | |
2274 | ||
413059f2 | 2275 | #ifdef CONFIG_64BIT |
1da177e4 LT |
2276 | ldo -16(%r30),%r29 /* Reference param save area */ |
2277 | #endif | |
2278 | BL do_signal,%r2 | |
2279 | copy %r0, %r26 /* sigset_t *oldset = NULL */ | |
2280 | ||
2281 | LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 | |
2282 | ldo TASK_REGS(%r1), %r20 /* reload pt_regs */ | |
2283 | reg_restore %r20 | |
2284 | ||
2285 | b,n syscall_check_sig | |
2286 | ||
2287 | /* | |
2288 | * get_register is used by the non access tlb miss handlers to | |
2289 | * copy the value of the general register specified in r8 into | |
2290 | * r1. This routine can't be used for shadowed registers, since | |
2291 | * the rfir will restore the original value. So, for the shadowed | |
2292 | * registers we put a -1 into r1 to indicate that the register | |
2293 | * should not be used (the register being copied could also have | |
2294 | * a -1 in it, but that is OK, it just means that we will have | |
2295 | * to use the slow path instead). | |
2296 | */ | |
2297 | ||
2298 | get_register: | |
2299 | blr %r8,%r0 | |
2300 | nop | |
2301 | bv %r0(%r25) /* r0 */ | |
2302 | copy %r0,%r1 | |
2303 | bv %r0(%r25) /* r1 - shadowed */ | |
2304 | ldi -1,%r1 | |
2305 | bv %r0(%r25) /* r2 */ | |
2306 | copy %r2,%r1 | |
2307 | bv %r0(%r25) /* r3 */ | |
2308 | copy %r3,%r1 | |
2309 | bv %r0(%r25) /* r4 */ | |
2310 | copy %r4,%r1 | |
2311 | bv %r0(%r25) /* r5 */ | |
2312 | copy %r5,%r1 | |
2313 | bv %r0(%r25) /* r6 */ | |
2314 | copy %r6,%r1 | |
2315 | bv %r0(%r25) /* r7 */ | |
2316 | copy %r7,%r1 | |
2317 | bv %r0(%r25) /* r8 - shadowed */ | |
2318 | ldi -1,%r1 | |
2319 | bv %r0(%r25) /* r9 - shadowed */ | |
2320 | ldi -1,%r1 | |
2321 | bv %r0(%r25) /* r10 */ | |
2322 | copy %r10,%r1 | |
2323 | bv %r0(%r25) /* r11 */ | |
2324 | copy %r11,%r1 | |
2325 | bv %r0(%r25) /* r12 */ | |
2326 | copy %r12,%r1 | |
2327 | bv %r0(%r25) /* r13 */ | |
2328 | copy %r13,%r1 | |
2329 | bv %r0(%r25) /* r14 */ | |
2330 | copy %r14,%r1 | |
2331 | bv %r0(%r25) /* r15 */ | |
2332 | copy %r15,%r1 | |
2333 | bv %r0(%r25) /* r16 - shadowed */ | |
2334 | ldi -1,%r1 | |
2335 | bv %r0(%r25) /* r17 - shadowed */ | |
2336 | ldi -1,%r1 | |
2337 | bv %r0(%r25) /* r18 */ | |
2338 | copy %r18,%r1 | |
2339 | bv %r0(%r25) /* r19 */ | |
2340 | copy %r19,%r1 | |
2341 | bv %r0(%r25) /* r20 */ | |
2342 | copy %r20,%r1 | |
2343 | bv %r0(%r25) /* r21 */ | |
2344 | copy %r21,%r1 | |
2345 | bv %r0(%r25) /* r22 */ | |
2346 | copy %r22,%r1 | |
2347 | bv %r0(%r25) /* r23 */ | |
2348 | copy %r23,%r1 | |
2349 | bv %r0(%r25) /* r24 - shadowed */ | |
2350 | ldi -1,%r1 | |
2351 | bv %r0(%r25) /* r25 - shadowed */ | |
2352 | ldi -1,%r1 | |
2353 | bv %r0(%r25) /* r26 */ | |
2354 | copy %r26,%r1 | |
2355 | bv %r0(%r25) /* r27 */ | |
2356 | copy %r27,%r1 | |
2357 | bv %r0(%r25) /* r28 */ | |
2358 | copy %r28,%r1 | |
2359 | bv %r0(%r25) /* r29 */ | |
2360 | copy %r29,%r1 | |
2361 | bv %r0(%r25) /* r30 */ | |
2362 | copy %r30,%r1 | |
2363 | bv %r0(%r25) /* r31 */ | |
2364 | copy %r31,%r1 | |
2365 | ||
2366 | /* | |
2367 | * set_register is used by the non access tlb miss handlers to | |
2368 | * copy the value of r1 into the general register specified in | |
2369 | * r8. | |
2370 | */ | |
2371 | ||
2372 | set_register: | |
2373 | blr %r8,%r0 | |
2374 | nop | |
2375 | bv %r0(%r25) /* r0 (silly, but it is a place holder) */ | |
2376 | copy %r1,%r0 | |
2377 | bv %r0(%r25) /* r1 */ | |
2378 | copy %r1,%r1 | |
2379 | bv %r0(%r25) /* r2 */ | |
2380 | copy %r1,%r2 | |
2381 | bv %r0(%r25) /* r3 */ | |
2382 | copy %r1,%r3 | |
2383 | bv %r0(%r25) /* r4 */ | |
2384 | copy %r1,%r4 | |
2385 | bv %r0(%r25) /* r5 */ | |
2386 | copy %r1,%r5 | |
2387 | bv %r0(%r25) /* r6 */ | |
2388 | copy %r1,%r6 | |
2389 | bv %r0(%r25) /* r7 */ | |
2390 | copy %r1,%r7 | |
2391 | bv %r0(%r25) /* r8 */ | |
2392 | copy %r1,%r8 | |
2393 | bv %r0(%r25) /* r9 */ | |
2394 | copy %r1,%r9 | |
2395 | bv %r0(%r25) /* r10 */ | |
2396 | copy %r1,%r10 | |
2397 | bv %r0(%r25) /* r11 */ | |
2398 | copy %r1,%r11 | |
2399 | bv %r0(%r25) /* r12 */ | |
2400 | copy %r1,%r12 | |
2401 | bv %r0(%r25) /* r13 */ | |
2402 | copy %r1,%r13 | |
2403 | bv %r0(%r25) /* r14 */ | |
2404 | copy %r1,%r14 | |
2405 | bv %r0(%r25) /* r15 */ | |
2406 | copy %r1,%r15 | |
2407 | bv %r0(%r25) /* r16 */ | |
2408 | copy %r1,%r16 | |
2409 | bv %r0(%r25) /* r17 */ | |
2410 | copy %r1,%r17 | |
2411 | bv %r0(%r25) /* r18 */ | |
2412 | copy %r1,%r18 | |
2413 | bv %r0(%r25) /* r19 */ | |
2414 | copy %r1,%r19 | |
2415 | bv %r0(%r25) /* r20 */ | |
2416 | copy %r1,%r20 | |
2417 | bv %r0(%r25) /* r21 */ | |
2418 | copy %r1,%r21 | |
2419 | bv %r0(%r25) /* r22 */ | |
2420 | copy %r1,%r22 | |
2421 | bv %r0(%r25) /* r23 */ | |
2422 | copy %r1,%r23 | |
2423 | bv %r0(%r25) /* r24 */ | |
2424 | copy %r1,%r24 | |
2425 | bv %r0(%r25) /* r25 */ | |
2426 | copy %r1,%r25 | |
2427 | bv %r0(%r25) /* r26 */ | |
2428 | copy %r1,%r26 | |
2429 | bv %r0(%r25) /* r27 */ | |
2430 | copy %r1,%r27 | |
2431 | bv %r0(%r25) /* r28 */ | |
2432 | copy %r1,%r28 | |
2433 | bv %r0(%r25) /* r29 */ | |
2434 | copy %r1,%r29 | |
2435 | bv %r0(%r25) /* r30 */ | |
2436 | copy %r1,%r30 | |
2437 | bv %r0(%r25) /* r31 */ | |
2438 | copy %r1,%r31 |