[mirror_ubuntu-eoan-kernel.git] / arch / powerpc / boot / dts / mpc8313erdb.dts

/*
 * MPC8313E RDB Device Tree Source
 *
 * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;

/ {
	model = "MPC8313ERDB";
	compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8313@0 {
			device_type = "cpu";
			reg = <0x0>;
			d-cache-line-size = <32>;
			i-cache-line-size = <32>;
			d-cache-size = <16384>;
			i-cache-size = <16384>;
			timebase-frequency = <0>;	// from bootloader
			bus-frequency = <0>;		// from bootloader
			clock-frequency = <0>;		// from bootloader
		};
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x08000000>;	// 128MB at 0
	};

	localbus@e0005000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
		reg = <0xe0005000 0x1000>;
		interrupts = <77 0x8>;
		interrupt-parent = <&ipic>;

		// CS0 and CS1 are swapped when
		// booting from nand, but the
		// addresses are the same.
		ranges = <0x0 0x0 0xfe000000 0x00800000
		          0x1 0x0 0xe2800000 0x00008000
		          0x2 0x0 0xf0000000 0x00020000
		          0x3 0x0 0xfa000000 0x00008000>;

		flash@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x800000>;
			bank-width = <2>;
			device-width = <1>;
		};

		nand@1,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8313-fcm-nand",
			             "fsl,elbc-fcm-nand";
			reg = <0x1 0x0 0x2000>;

			u-boot@0 {
				reg = <0x0 0x100000>;
				read-only;
			};

			kernel@100000 {
				reg = <0x100000 0x300000>;
			};

			fs@400000 {
				reg = <0x400000 0x1c00000>;
			};
		};
	};

	soc8313@e0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x0 0xe0000000 0x00100000>;
		reg = <0xe0000000 0x00000200>;
		bus-frequency = <0>;

		wdt@200 {
			device_type = "watchdog";
			compatible = "mpc83xx_wdt";
			reg = <0x200 0x100>;
		};

		sleep-nexus {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "simple-bus";
			sleep = <&pmc 0x03000000>;
			ranges;

			i2c@3000 {
				#address-cells = <1>;
				#size-cells = <0>;
				cell-index = <0>;
				compatible = "fsl-i2c";
				reg = <0x3000 0x100>;
				interrupts = <14 0x8>;
				interrupt-parent = <&ipic>;
				dfsrr;
				rtc@68 {
					compatible = "dallas,ds1339";
					reg = <0x68>;
				};
			};

			crypto@30000 {
				compatible = "fsl,sec2.2", "fsl,sec2.1",
				             "fsl,sec2.0";
				reg = <0x30000 0x10000>;
				interrupts = <11 0x8>;
				interrupt-parent = <&ipic>;
				fsl,num-channels = <1>;
				fsl,channel-fifo-len = <24>;
				fsl,exec-units-mask = <0x4c>;
				fsl,descriptor-types-mask = <0x0122003f>;
			};
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x3100 0x100>;
			interrupts = <15 0x8>;
			interrupt-parent = <&ipic>;
			dfsrr;
		};

		spi@7000 {
			cell-index = <0>;
			compatible = "fsl,spi";
			reg = <0x7000 0x1000>;
			interrupts = <16 0x8>;
			interrupt-parent = <&ipic>;
			mode = "cpu";
		};

		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
		usb@23000 {
			compatible = "fsl-usb2-dr";
			reg = <0x23000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupt-parent = <&ipic>;
			interrupts = <38 0x8>;
			phy_type = "utmi_wide";
			sleep = <&pmc 0x00300000>;
		};

		enet0: ethernet@24000 {
			#address-cells = <1>;
			#size-cells = <1>;
			sleep = <&pmc 0x20000000>;
			ranges;

			cell-index = <0>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar", "simple-bus";
			reg = <0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <37 0x8 36 0x8 35 0x8>;
			interrupt-parent = <&ipic>;
			phy-handle = < &phy1 >;
			fsl,magic-packet;

			mdio@24520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-mdio";
				reg = <0x24520 0x20>;
				phy1: ethernet-phy@1 {
					interrupt-parent = <&ipic>;
					interrupts = <19 0x8>;
					reg = <0x1>;
					device_type = "ethernet-phy";
				};
				phy4: ethernet-phy@4 {
					interrupt-parent = <&ipic>;
					interrupts = <20 0x8>;
					reg = <0x4>;
					device_type = "ethernet-phy";
				};
			};
		};

		enet1: ethernet@25000 {
			cell-index = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <34 0x8 33 0x8 32 0x8>;
			interrupt-parent = <&ipic>;
			phy-handle = < &phy4 >;
			sleep = <&pmc 0x10000000>;
			fsl,magic-packet;
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>;
			clock-frequency = <0>;
			interrupts = <9 0x8>;
			interrupt-parent = <&ipic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4600 0x100>;
			clock-frequency = <0>;
			interrupts = <10 0x8>;
			interrupt-parent = <&ipic>;
		};

		/* IPIC
		 * interrupts cell = <intr #, sense>
		 * sense values match linux IORESOURCE_IRQ_* defines:
		 * sense == 8: Level, low assertion
		 * sense == 2: Edge, high-to-low change
		 */
		ipic: pic@700 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x700 0x100>;
			device_type = "ipic";
		};

		pmc: power@b00 {
			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
			reg = <0xb00 0x100 0xa00 0x100>;
			interrupts = <80 8>;
			interrupt-parent = <&ipic>;
			fsl,mpc8313-wakeup-timer = <&gtm1>;

			/* Remove this (or change to "okay") if you have
			 * a REVA3 or later board, if you apply one of the
			 * workarounds listed in section 8.5 of the board
			 * manual, or if you are adapting this device tree
			 * to a different board.
			 */
			status = "fail";
		};

		gtm1: timer@500 {
			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
			reg = <0x500 0x100>;
			interrupts = <90 8 78 8 84 8 72 8>;
			interrupt-parent = <&ipic>;
		};

		timer@600 {
			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
			reg = <0x600 0x100>;
			interrupts = <91 8 79 8 85 8 73 8>;
			interrupt-parent = <&ipic>;
		};
	};

	sleep-nexus {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		sleep = <&pmc 0x00010000>;
		ranges;

		pci0: pci@e0008500 {
			cell-index = <1>;
			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map = <
					/* IDSEL 0x0E -mini PCI */
					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
					 0x7000 0x0 0x0 0x4 &ipic 18 0x8

					/* IDSEL 0x0F - PCI slot */
					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
			interrupt-parent = <&ipic>;
			interrupts = <66 0x8>;
			bus-range = <0x0 0x0>;
			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
			clock-frequency = <66666666>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			reg = <0xe0008500 0x100		/* internal registers */
			       0xe0008300 0x8>;		/* config space access registers */
			compatible = "fsl,mpc8349-pci";
			device_type = "pci";
		};

		dma@82a8 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
			reg = <0xe00082a8 4>;
			ranges = <0 0xe0008100 0x1a8>;
			interrupt-parent = <&ipic>;
			interrupts = <71 8>;

			dma-channel@0 {
				compatible = "fsl,mpc8313-dma-channel",
				             "fsl,elo-dma-channel";
				reg = <0 0x28>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
				cell-index = <0>;
			};

			dma-channel@80 {
				compatible = "fsl,mpc8313-dma-channel",
				             "fsl,elo-dma-channel";
				reg = <0x80 0x28>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
				cell-index = <1>;
			};

			dma-channel@100 {
				compatible = "fsl,mpc8313-dma-channel",
				             "fsl,elo-dma-channel";
				reg = <0x100 0x28>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
				cell-index = <2>;
			};

			dma-channel@180 {
				compatible = "fsl,mpc8313-dma-channel",
				             "fsl,elo-dma-channel";
				reg = <0x180 0x28>;
				interrupt-parent = <&ipic>;
				interrupts = <71 8>;
				cell-index = <3>;
			};
		};
	};
};
Commit	Line	Data
b359049f KP	1	/*
	2	* MPC8313E RDB Device Tree Source
	3	*
	4	* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
	5	*
	6	* This program is free software; you can redistribute it and/or modify it
	7	* under the terms of the GNU General Public License as published by the
	8	* Free Software Foundation; either version 2 of the License, or (at your
	9	* option) any later version.
	10	*/
	11
cda13dd1 PG	12	/dts-v1/;
cda13dd1 PG	13
b359049f KP	14	/ {
b359049f KP	15	model = "MPC8313ERDB";
d71a1dc6	16	compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
b359049f KP	17	#address-cells = <1>;
	18	#size-cells = <1>;
	19
ea082fa9 KG	20	aliases {
	21	ethernet0 = &enet0;
	22	ethernet1 = &enet1;
	23	serial0 = &serial0;
	24	serial1 = &serial1;
	25	pci0 = &pci0;
	26	};
	27
b359049f	28	cpus {
b359049f KP	29	#address-cells = <1>;
	30	#size-cells = <0>;
	31
	32	PowerPC,8313@0 {
	33	device_type = "cpu";
cda13dd1 PG	34	reg = <0x0>;
	35	d-cache-line-size = <32>;
	36	i-cache-line-size = <32>;
	37	d-cache-size = <16384>;
	38	i-cache-size = <16384>;
b359049f KP	39	timebase-frequency = <0>; // from bootloader
	40	bus-frequency = <0>; // from bootloader
	41	clock-frequency = <0>; // from bootloader
b359049f KP	42	};
	43	};
	44
	45	memory {
	46	device_type = "memory";
cda13dd1	47	reg = <0x00000000 0x08000000>; // 128MB at 0
b359049f KP	48	};
b359049f KP	49
ff5ac760 SW	50	localbus@e0005000 {
	51	#address-cells = <2>;
	52	#size-cells = <1>;
	53	compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
cda13dd1 PG	54	reg = <0xe0005000 0x1000>;
cda13dd1 PG	55	interrupts = <77 0x8>;
ff5ac760 SW	56	interrupt-parent = <&ipic>;
	57
	58	// CS0 and CS1 are swapped when
	59	// booting from nand, but the
	60	// addresses are the same.
cda13dd1 PG	61	ranges = <0x0 0x0 0xfe000000 0x00800000
	62	0x1 0x0 0xe2800000 0x00008000
	63	0x2 0x0 0xf0000000 0x00020000
	64	0x3 0x0 0xfa000000 0x00008000>;
ff5ac760	65
12600e48 SW	66	flash@0,0 {
	67	#address-cells = <1>;
	68	#size-cells = <1>;
	69	compatible = "cfi-flash";
cda13dd1	70	reg = <0x0 0x0 0x800000>;
12600e48 SW	71	bank-width = <2>;
	72	device-width = <1>;
	73	};
	74
ff5ac760 SW	75	nand@1,0 {
	76	#address-cells = <1>;
	77	#size-cells = <1>;
	78	compatible = "fsl,mpc8313-fcm-nand",
	79	"fsl,elbc-fcm-nand";
cda13dd1	80	reg = <0x1 0x0 0x2000>;
ff5ac760 SW	81
ff5ac760 SW	82	u-boot@0 {
cda13dd1	83	reg = <0x0 0x100000>;
ff5ac760 SW	84	read-only;
	85	};
	86
	87	kernel@100000 {
cda13dd1	88	reg = <0x100000 0x300000>;
ff5ac760 SW	89	};
	90
	91	fs@400000 {
cda13dd1	92	reg = <0x400000 0x1c00000>;
ff5ac760 SW	93	};
	94	};
	95	};
	96
b359049f KP	97	soc8313@e0000000 {
	98	#address-cells = <1>;
	99	#size-cells = <1>;
b359049f	100	device_type = "soc";
ff5ac760	101	compatible = "simple-bus";
cda13dd1 PG	102	ranges = <0x0 0xe0000000 0x00100000>;
cda13dd1 PG	103	reg = <0xe0000000 0x00000200>;
b359049f KP	104	bus-frequency = <0>;
	105
	106	wdt@200 {
	107	device_type = "watchdog";
	108	compatible = "mpc83xx_wdt";
cda13dd1	109	reg = <0x200 0x100>;
b359049f KP	110	};
b359049f KP	111
57436612	112	sleep-nexus {
ec9686c4	113	#address-cells = <1>;
57436612 SW	114	#size-cells = <1>;
	115	compatible = "simple-bus";
	116	sleep = <&pmc 0x03000000>;
	117	ranges;
	118
	119	i2c@3000 {
	120	#address-cells = <1>;
	121	#size-cells = <0>;
	122	cell-index = <0>;
	123	compatible = "fsl-i2c";
	124	reg = <0x3000 0x100>;
	125	interrupts = <14 0x8>;
	126	interrupt-parent = <&ipic>;
	127	dfsrr;
	128	rtc@68 {
	129	compatible = "dallas,ds1339";
	130	reg = <0x68>;
	131	};
	132	};
	133
	134	crypto@30000 {
	135	compatible = "fsl,sec2.2", "fsl,sec2.1",
	136	"fsl,sec2.0";
	137	reg = <0x30000 0x10000>;
	138	interrupts = <11 0x8>;
	139	interrupt-parent = <&ipic>;
	140	fsl,num-channels = <1>;
	141	fsl,channel-fifo-len = <24>;
	142	fsl,exec-units-mask = <0x4c>;
	143	fsl,descriptor-types-mask = <0x0122003f>;
5cfade18	144	};
b359049f KP	145	};
	146
	147	i2c@3100 {
ec9686c4 KG	148	#address-cells = <1>;
	149	#size-cells = <0>;
	150	cell-index = <1>;
b359049f	151	compatible = "fsl-i2c";
cda13dd1 PG	152	reg = <0x3100 0x100>;
	153	interrupts = <15 0x8>;
	154	interrupt-parent = <&ipic>;
b359049f KP	155	dfsrr;
	156	};
	157
	158	spi@7000 {
f3a2b29d AV	159	cell-index = <0>;
f3a2b29d AV	160	compatible = "fsl,spi";
cda13dd1 PG	161	reg = <0x7000 0x1000>;
	162	interrupts = <16 0x8>;
	163	interrupt-parent = <&ipic>;
33799e33	164	mode = "cpu";
b359049f KP	165	};
	166
	167	/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
	168	usb@23000 {
b359049f	169	compatible = "fsl-usb2-dr";
cda13dd1	170	reg = <0x23000 0x1000>;
b359049f KP	171	#address-cells = <1>;
b359049f KP	172	#size-cells = <0>;
cda13dd1 PG	173	interrupt-parent = <&ipic>;
cda13dd1 PG	174	interrupts = <38 0x8>;
b359049f	175	phy_type = "utmi_wide";
57436612	176	sleep = <&pmc 0x00300000>;
b359049f KP	177	};
b359049f KP	178
57436612	179	enet0: ethernet@24000 {
b359049f	180	#address-cells = <1>;
57436612 SW	181	#size-cells = <1>;
	182	sleep = <&pmc 0x20000000>;
	183	ranges;
b359049f	184
e77b28eb	185	cell-index = <0>;
b359049f KP	186	device_type = "network";
b359049f KP	187	model = "eTSEC";
57436612	188	compatible = "gianfar", "simple-bus";
cda13dd1	189	reg = <0x24000 0x1000>;
b359049f	190	local-mac-address = [ 00 00 00 00 00 00 ];
cda13dd1 PG	191	interrupts = <37 0x8 36 0x8 35 0x8>;
cda13dd1 PG	192	interrupt-parent = <&ipic>;
d71a1dc6	193	phy-handle = < &phy1 >;
57436612 SW	194	fsl,magic-packet;
	195
	196	mdio@24520 {
	197	#address-cells = <1>;
	198	#size-cells = <0>;
	199	compatible = "fsl,gianfar-mdio";
	200	reg = <0x24520 0x20>;
	201	phy1: ethernet-phy@1 {
	202	interrupt-parent = <&ipic>;
	203	interrupts = <19 0x8>;
	204	reg = <0x1>;
	205	device_type = "ethernet-phy";
	206	};
	207	phy4: ethernet-phy@4 {
	208	interrupt-parent = <&ipic>;
	209	interrupts = <20 0x8>;
	210	reg = <0x4>;
	211	device_type = "ethernet-phy";
	212	};
	213	};
b359049f KP	214	};
b359049f KP	215
e77b28eb KG	216	enet1: ethernet@25000 {
e77b28eb KG	217	cell-index = <1>;
b359049f KP	218	device_type = "network";
	219	model = "eTSEC";
	220	compatible = "gianfar";
cda13dd1	221	reg = <0x25000 0x1000>;
b359049f	222	local-mac-address = [ 00 00 00 00 00 00 ];
cda13dd1 PG	223	interrupts = <34 0x8 33 0x8 32 0x8>;
cda13dd1 PG	224	interrupt-parent = <&ipic>;
d71a1dc6	225	phy-handle = < &phy4 >;
57436612 SW	226	sleep = <&pmc 0x10000000>;
57436612 SW	227	fsl,magic-packet;
b359049f KP	228	};
b359049f KP	229
ea082fa9 KG	230	serial0: serial@4500 {
ea082fa9 KG	231	cell-index = <0>;
b359049f KP	232	device_type = "serial";
b359049f KP	233	compatible = "ns16550";
cda13dd1	234	reg = <0x4500 0x100>;
b359049f	235	clock-frequency = <0>;
cda13dd1 PG	236	interrupts = <9 0x8>;
cda13dd1 PG	237	interrupt-parent = <&ipic>;
b359049f KP	238	};
b359049f KP	239
ea082fa9 KG	240	serial1: serial@4600 {
ea082fa9 KG	241	cell-index = <1>;
b359049f KP	242	device_type = "serial";
b359049f KP	243	compatible = "ns16550";
cda13dd1	244	reg = <0x4600 0x100>;
b359049f	245	clock-frequency = <0>;
cda13dd1 PG	246	interrupts = <10 0x8>;
cda13dd1 PG	247	interrupt-parent = <&ipic>;
b359049f KP	248	};
b359049f KP	249
b359049f KP	250	/* IPIC
	251	* interrupts cell = <intr #, sense>
	252	* sense values match linux IORESOURCE_IRQ_* defines:
	253	* sense == 8: Level, low assertion
	254	* sense == 2: Edge, high-to-low change
	255	*/
d71a1dc6	256	ipic: pic@700 {
b359049f KP	257	interrupt-controller;
	258	#address-cells = <0>;
	259	#interrupt-cells = <2>;
cda13dd1	260	reg = <0x700 0x100>;
b359049f KP	261	device_type = "ipic";
b359049f KP	262	};
57436612 SW	263
	264	pmc: power@b00 {
	265	compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
	266	reg = <0xb00 0x100 0xa00 0x100>;
	267	interrupts = <80 8>;
	268	interrupt-parent = <&ipic>;
	269	fsl,mpc8313-wakeup-timer = <&gtm1>;
	270
	271	/* Remove this (or change to "okay") if you have
	272	* a REVA3 or later board, if you apply one of the
	273	* workarounds listed in section 8.5 of the board
	274	* manual, or if you are adapting this device tree
	275	* to a different board.
	276	*/
	277	status = "fail";
	278	};
	279
	280	gtm1: timer@500 {
	281	compatible = "fsl,mpc8313-gtm", "fsl,gtm";
	282	reg = <0x500 0x100>;
	283	interrupts = <90 8 78 8 84 8 72 8>;
	284	interrupt-parent = <&ipic>;
	285	};
	286
	287	timer@600 {
	288	compatible = "fsl,mpc8313-gtm", "fsl,gtm";
	289	reg = <0x600 0x100>;
	290	interrupts = <91 8 79 8 85 8 73 8>;
	291	interrupt-parent = <&ipic>;
	292	};
b359049f	293	};
1b3c5cda	294
57436612 SW	295	sleep-nexus {
	296	#address-cells = <1>;
	297	#size-cells = <1>;
	298	compatible = "simple-bus";
	299	sleep = <&pmc 0x00010000>;
	300	ranges;
	301
	302	pci0: pci@e0008500 {
	303	cell-index = <1>;
	304	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
	305	interrupt-map = <
	306	/* IDSEL 0x0E -mini PCI */
	307	0x7000 0x0 0x0 0x1 &ipic 18 0x8
	308	0x7000 0x0 0x0 0x2 &ipic 18 0x8
	309	0x7000 0x0 0x0 0x3 &ipic 18 0x8
	310	0x7000 0x0 0x0 0x4 &ipic 18 0x8
	311
	312	/* IDSEL 0x0F - PCI slot */
	313	0x7800 0x0 0x0 0x1 &ipic 17 0x8
	314	0x7800 0x0 0x0 0x2 &ipic 18 0x8
	315	0x7800 0x0 0x0 0x3 &ipic 17 0x8
	316	0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
	317	interrupt-parent = <&ipic>;
	318	interrupts = <66 0x8>;
	319	bus-range = <0x0 0x0>;
	320	ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
	321	0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
	322	0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
	323	clock-frequency = <66666666>;
	324	#interrupt-cells = <1>;
	325	#size-cells = <2>;
	326	#address-cells = <3>;
5b70a097 JR	327	reg = <0xe0008500 0x100 /* internal registers */
5b70a097 JR	328	0xe0008300 0x8>; /* config space access registers */
57436612 SW	329	compatible = "fsl,mpc8349-pci";
	330	device_type = "pci";
	331	};
	332
	333	dma@82a8 {
	334	#address-cells = <1>;
	335	#size-cells = <1>;
	336	compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
	337	reg = <0xe00082a8 4>;
	338	ranges = <0 0xe0008100 0x1a8>;
	339	interrupt-parent = <&ipic>;
	340	interrupts = <71 8>;
	341
	342	dma-channel@0 {
	343	compatible = "fsl,mpc8313-dma-channel",
	344	"fsl,elo-dma-channel";
	345	reg = <0 0x28>;
	346	interrupt-parent = <&ipic>;
	347	interrupts = <71 8>;
	348	cell-index = <0>;
	349	};
	350
	351	dma-channel@80 {
	352	compatible = "fsl,mpc8313-dma-channel",
	353	"fsl,elo-dma-channel";
	354	reg = <0x80 0x28>;
	355	interrupt-parent = <&ipic>;
	356	interrupts = <71 8>;
	357	cell-index = <1>;
	358	};
	359
	360	dma-channel@100 {
	361	compatible = "fsl,mpc8313-dma-channel",
	362	"fsl,elo-dma-channel";
	363	reg = <0x100 0x28>;
	364	interrupt-parent = <&ipic>;
	365	interrupts = <71 8>;
	366	cell-index = <2>;
	367	};
	368
	369	dma-channel@180 {
	370	compatible = "fsl,mpc8313-dma-channel",
	371	"fsl,elo-dma-channel";
	372	reg = <0x180 0x28>;
	373	interrupt-parent = <&ipic>;
	374	interrupts = <71 8>;
	375	cell-index = <3>;
	376	};
	377	};
1b3c5cda	378	};
b359049f	379	};