]>
Commit | Line | Data |
---|---|---|
7a234d03 LY |
1 | /* |
2 | * MPC8360E EMDS Device Tree Source | |
3 | * | |
4 | * Copyright 2006 Freescale Semiconductor Inc. | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify it | |
7 | * under the terms of the GNU General Public License as published by the | |
8 | * Free Software Foundation; either version 2 of the License, or (at your | |
9 | * option) any later version. | |
10 | */ | |
11 | ||
12 | ||
13 | /* | |
14 | /memreserve/ 00000000 1000000; | |
15 | */ | |
16 | ||
17 | / { | |
18 | model = "MPC8360EPB"; | |
19 | compatible = "MPC83xx"; | |
20 | #address-cells = <1>; | |
21 | #size-cells = <1>; | |
22 | linux,phandle = <100>; | |
23 | ||
24 | cpus { | |
25 | #cpus = <1>; | |
26 | #address-cells = <1>; | |
27 | #size-cells = <0>; | |
28 | linux,phandle = <200>; | |
29 | ||
30 | PowerPC,8360@0 { | |
31 | device_type = "cpu"; | |
32 | reg = <0>; | |
33 | d-cache-line-size = <20>; // 32 bytes | |
34 | i-cache-line-size = <20>; // 32 bytes | |
35 | d-cache-size = <8000>; // L1, 32K | |
36 | i-cache-size = <8000>; // L1, 32K | |
37 | timebase-frequency = <3EF1480>; | |
38 | bus-frequency = <FBC5200>; | |
39 | clock-frequency = <1F78A400>; | |
40 | 32-bit; | |
41 | linux,phandle = <201>; | |
42 | linux,boot-cpu; | |
43 | }; | |
44 | }; | |
45 | ||
46 | memory { | |
47 | device_type = "memory"; | |
48 | linux,phandle = <300>; | |
49 | reg = <00000000 10000000>; | |
50 | }; | |
51 | ||
52 | bcsr@f8000000 { | |
53 | device_type = "board-control"; | |
54 | reg = <f8000000 8000>; | |
55 | }; | |
56 | ||
57 | soc8360@e0000000 { | |
58 | #address-cells = <1>; | |
59 | #size-cells = <1>; | |
60 | #interrupt-cells = <2>; | |
61 | device_type = "soc"; | |
62 | ranges = <0 e0000000 00100000>; | |
63 | reg = <e0000000 00000200>; | |
64 | bus-frequency = <FBC5200>; | |
65 | ||
66 | wdt@200 { | |
67 | device_type = "watchdog"; | |
68 | compatible = "mpc83xx_wdt"; | |
69 | reg = <200 100>; | |
70 | }; | |
71 | ||
72 | i2c@3000 { | |
73 | device_type = "i2c"; | |
74 | compatible = "fsl-i2c"; | |
75 | reg = <3000 100>; | |
76 | interrupts = <e 8>; | |
77 | interrupt-parent = <700>; | |
78 | dfsrr; | |
79 | }; | |
80 | ||
81 | i2c@3100 { | |
82 | device_type = "i2c"; | |
83 | compatible = "fsl-i2c"; | |
84 | reg = <3100 100>; | |
85 | interrupts = <f 8>; | |
86 | interrupt-parent = <700>; | |
87 | dfsrr; | |
88 | }; | |
89 | ||
90 | serial@4500 { | |
91 | device_type = "serial"; | |
92 | compatible = "ns16550"; | |
93 | reg = <4500 100>; | |
94 | clock-frequency = <FBC5200>; | |
95 | interrupts = <9 8>; | |
96 | interrupt-parent = <700>; | |
97 | }; | |
98 | ||
99 | serial@4600 { | |
100 | device_type = "serial"; | |
101 | compatible = "ns16550"; | |
102 | reg = <4600 100>; | |
103 | clock-frequency = <FBC5200>; | |
104 | interrupts = <a 8>; | |
105 | interrupt-parent = <700>; | |
106 | }; | |
107 | ||
108 | crypto@30000 { | |
109 | device_type = "crypto"; | |
110 | model = "SEC2"; | |
111 | compatible = "talitos"; | |
112 | reg = <30000 10000>; | |
113 | interrupts = <b 8>; | |
114 | interrupt-parent = <700>; | |
115 | num-channels = <4>; | |
116 | channel-fifo-len = <18>; | |
117 | exec-units-mask = <0000007e>; | |
118 | /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ | |
119 | descriptor-types-mask = <01010ebf>; | |
120 | }; | |
121 | ||
122 | pci@8500 { | |
123 | linux,phandle = <8500>; | |
124 | interrupt-map-mask = <f800 0 0 7>; | |
125 | interrupt-map = < | |
126 | ||
127 | /* IDSEL 0x11 AD17 */ | |
128 | 8800 0 0 1 700 14 8 | |
129 | 8800 0 0 2 700 15 8 | |
130 | 8800 0 0 3 700 16 8 | |
131 | 8800 0 0 4 700 17 8 | |
132 | ||
133 | /* IDSEL 0x12 AD18 */ | |
134 | 9000 0 0 1 700 16 8 | |
135 | 9000 0 0 2 700 17 8 | |
136 | 9000 0 0 3 700 14 8 | |
137 | 9000 0 0 4 700 15 8 | |
138 | ||
139 | /* IDSEL 0x13 AD19 */ | |
140 | 9800 0 0 1 700 17 8 | |
141 | 9800 0 0 2 700 14 8 | |
142 | 9800 0 0 3 700 15 8 | |
143 | 9800 0 0 4 700 16 8 | |
144 | ||
145 | /* IDSEL 0x15 AD21*/ | |
146 | a800 0 0 1 700 14 8 | |
147 | a800 0 0 2 700 15 8 | |
148 | a800 0 0 3 700 16 8 | |
149 | a800 0 0 4 700 17 8 | |
150 | ||
151 | /* IDSEL 0x16 AD22*/ | |
152 | b000 0 0 1 700 17 8 | |
153 | b000 0 0 2 700 14 8 | |
154 | b000 0 0 3 700 15 8 | |
155 | b000 0 0 4 700 16 8 | |
156 | ||
157 | /* IDSEL 0x17 AD23*/ | |
158 | b800 0 0 1 700 16 8 | |
159 | b800 0 0 2 700 17 8 | |
160 | b800 0 0 3 700 14 8 | |
161 | b800 0 0 4 700 15 8 | |
162 | ||
163 | /* IDSEL 0x18 AD24*/ | |
164 | c000 0 0 1 700 15 8 | |
165 | c000 0 0 2 700 16 8 | |
166 | c000 0 0 3 700 17 8 | |
167 | c000 0 0 4 700 14 8>; | |
168 | interrupt-parent = <700>; | |
169 | interrupts = <42 8>; | |
170 | bus-range = <0 0>; | |
171 | ranges = <02000000 0 a0000000 a0000000 0 10000000 | |
172 | 42000000 0 80000000 80000000 0 10000000 | |
173 | 01000000 0 00000000 e2000000 0 00100000>; | |
174 | clock-frequency = <3f940aa>; | |
175 | #interrupt-cells = <1>; | |
176 | #size-cells = <2>; | |
177 | #address-cells = <3>; | |
178 | reg = <8500 100>; | |
179 | compatible = "83xx"; | |
180 | device_type = "pci"; | |
181 | }; | |
182 | ||
183 | pic@700 { | |
184 | linux,phandle = <700>; | |
185 | interrupt-controller; | |
186 | #address-cells = <0>; | |
187 | #interrupt-cells = <2>; | |
188 | reg = <700 100>; | |
189 | built-in; | |
190 | device_type = "ipic"; | |
191 | }; | |
192 | ||
193 | par_io@1400 { | |
194 | reg = <1400 100>; | |
195 | device_type = "par_io"; | |
196 | num-ports = <7>; | |
197 | ||
198 | ucc_pin@01 { | |
199 | linux,phandle = <140001>; | |
200 | pio-map = < | |
201 | /* port pin dir open_drain assignment has_irq */ | |
202 | 0 3 1 0 1 0 /* TxD0 */ | |
203 | 0 4 1 0 1 0 /* TxD1 */ | |
204 | 0 5 1 0 1 0 /* TxD2 */ | |
205 | 0 6 1 0 1 0 /* TxD3 */ | |
206 | 1 6 1 0 3 0 /* TxD4 */ | |
207 | 1 7 1 0 1 0 /* TxD5 */ | |
208 | 1 9 1 0 2 0 /* TxD6 */ | |
209 | 1 a 1 0 2 0 /* TxD7 */ | |
210 | 0 9 2 0 1 0 /* RxD0 */ | |
211 | 0 a 2 0 1 0 /* RxD1 */ | |
212 | 0 b 2 0 1 0 /* RxD2 */ | |
213 | 0 c 2 0 1 0 /* RxD3 */ | |
214 | 0 d 2 0 1 0 /* RxD4 */ | |
215 | 1 1 2 0 2 0 /* RxD5 */ | |
216 | 1 0 2 0 2 0 /* RxD6 */ | |
217 | 1 4 2 0 2 0 /* RxD7 */ | |
218 | 0 7 1 0 1 0 /* TX_EN */ | |
219 | 0 8 1 0 1 0 /* TX_ER */ | |
220 | 0 f 2 0 1 0 /* RX_DV */ | |
221 | 0 10 2 0 1 0 /* RX_ER */ | |
222 | 0 0 2 0 1 0 /* RX_CLK */ | |
223 | 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ | |
224 | 2 8 2 0 1 0>; /* GTX125 - CLK9 */ | |
225 | }; | |
226 | ucc_pin@02 { | |
227 | linux,phandle = <140002>; | |
228 | pio-map = < | |
229 | /* port pin dir open_drain assignment has_irq */ | |
230 | 0 11 1 0 1 0 /* TxD0 */ | |
231 | 0 12 1 0 1 0 /* TxD1 */ | |
232 | 0 13 1 0 1 0 /* TxD2 */ | |
233 | 0 14 1 0 1 0 /* TxD3 */ | |
234 | 1 2 1 0 1 0 /* TxD4 */ | |
235 | 1 3 1 0 2 0 /* TxD5 */ | |
236 | 1 5 1 0 3 0 /* TxD6 */ | |
237 | 1 8 1 0 3 0 /* TxD7 */ | |
238 | 0 17 2 0 1 0 /* RxD0 */ | |
239 | 0 18 2 0 1 0 /* RxD1 */ | |
240 | 0 19 2 0 1 0 /* RxD2 */ | |
241 | 0 1a 2 0 1 0 /* RxD3 */ | |
242 | 0 1b 2 0 1 0 /* RxD4 */ | |
243 | 1 c 2 0 2 0 /* RxD5 */ | |
244 | 1 d 2 0 3 0 /* RxD6 */ | |
245 | 1 b 2 0 2 0 /* RxD7 */ | |
246 | 0 15 1 0 1 0 /* TX_EN */ | |
247 | 0 16 1 0 1 0 /* TX_ER */ | |
248 | 0 1d 2 0 1 0 /* RX_DV */ | |
249 | 0 1e 2 0 1 0 /* RX_ER */ | |
250 | 0 1f 2 0 1 0 /* RX_CLK */ | |
251 | 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ | |
252 | 2 3 2 0 1 0 /* GTX125 - CLK4 */ | |
253 | 0 1 3 0 2 0 /* MDIO */ | |
254 | 0 2 1 0 1 0>; /* MDC */ | |
255 | }; | |
256 | ||
257 | }; | |
258 | }; | |
259 | ||
260 | qe@e0100000 { | |
261 | #address-cells = <1>; | |
262 | #size-cells = <1>; | |
263 | device_type = "qe"; | |
264 | model = "QE"; | |
265 | ranges = <0 e0100000 00100000>; | |
266 | reg = <e0100000 480>; | |
267 | brg-frequency = <0>; | |
268 | bus-frequency = <179A7B00>; | |
269 | ||
270 | muram@10000 { | |
271 | device_type = "muram"; | |
272 | ranges = <0 00010000 0000c000>; | |
273 | ||
274 | data-only@0{ | |
275 | reg = <0 c000>; | |
276 | }; | |
277 | }; | |
278 | ||
279 | spi@4c0 { | |
280 | device_type = "spi"; | |
281 | compatible = "fsl_spi"; | |
282 | reg = <4c0 40>; | |
283 | interrupts = <2>; | |
284 | interrupt-parent = <80>; | |
285 | mode = "cpu"; | |
286 | }; | |
287 | ||
288 | spi@500 { | |
289 | device_type = "spi"; | |
290 | compatible = "fsl_spi"; | |
291 | reg = <500 40>; | |
292 | interrupts = <1>; | |
293 | interrupt-parent = <80>; | |
294 | mode = "cpu"; | |
295 | }; | |
296 | ||
297 | usb@6c0 { | |
298 | device_type = "usb"; | |
299 | compatible = "qe_udc"; | |
300 | reg = <6c0 40 8B00 100>; | |
301 | interrupts = <b>; | |
302 | interrupt-parent = <80>; | |
303 | mode = "slave"; | |
304 | }; | |
305 | ||
306 | ucc@2000 { | |
307 | device_type = "network"; | |
308 | compatible = "ucc_geth"; | |
309 | model = "UCC"; | |
310 | device-id = <1>; | |
311 | reg = <2000 200>; | |
312 | interrupts = <20>; | |
313 | interrupt-parent = <80>; | |
314 | mac-address = [ 00 04 9f 00 23 23 ]; | |
315 | rx-clock = <0>; | |
316 | tx-clock = <19>; | |
317 | phy-handle = <212000>; | |
318 | pio-handle = <140001>; | |
319 | }; | |
320 | ||
321 | ucc@3000 { | |
322 | device_type = "network"; | |
323 | compatible = "ucc_geth"; | |
324 | model = "UCC"; | |
325 | device-id = <2>; | |
326 | reg = <3000 200>; | |
327 | interrupts = <21>; | |
328 | interrupt-parent = <80>; | |
329 | mac-address = [ 00 11 22 33 44 55 ]; | |
330 | rx-clock = <0>; | |
331 | tx-clock = <14>; | |
332 | phy-handle = <212001>; | |
333 | pio-handle = <140002>; | |
334 | }; | |
335 | ||
336 | mdio@2120 { | |
337 | #address-cells = <1>; | |
338 | #size-cells = <0>; | |
339 | reg = <2120 18>; | |
340 | device_type = "mdio"; | |
341 | compatible = "ucc_geth_phy"; | |
342 | ||
343 | ethernet-phy@00 { | |
344 | linux,phandle = <212000>; | |
345 | interrupt-parent = <700>; | |
346 | interrupts = <11 2>; | |
347 | reg = <0>; | |
348 | device_type = "ethernet-phy"; | |
349 | interface = <6>; //ENET_1000_GMII | |
350 | }; | |
351 | ethernet-phy@01 { | |
352 | linux,phandle = <212001>; | |
353 | interrupt-parent = <700>; | |
354 | interrupts = <12 2>; | |
355 | reg = <1>; | |
356 | device_type = "ethernet-phy"; | |
357 | interface = <6>; | |
358 | }; | |
359 | }; | |
360 | ||
361 | qeic@80 { | |
362 | linux,phandle = <80>; | |
363 | interrupt-controller; | |
364 | device_type = "qeic"; | |
365 | #address-cells = <0>; | |
366 | #interrupt-cells = <1>; | |
367 | reg = <80 80>; | |
368 | built-in; | |
369 | big-endian; | |
370 | interrupts = <20 8 21 8>; //high:32 low:33 | |
371 | interrupt-parent = <700>; | |
372 | }; | |
373 | ||
374 | }; | |
375 | }; |