[mirror_ubuntu-zesty-kernel.git] / arch / powerpc / include / asm / hvcall.h

#ifndef _ASM_POWERPC_HVCALL_H
#define _ASM_POWERPC_HVCALL_H
#ifdef __KERNEL__

#define HVSC			.long 0x44000022

#define H_SUCCESS	0
#define H_BUSY		1	/* Hardware busy -- retry later */
#define H_CLOSED	2	/* Resource closed */
#define H_NOT_AVAILABLE 3
#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
#define H_PARTIAL       5
#define H_IN_PROGRESS	14	/* Kind of like busy */
#define H_PAGE_REGISTERED 15
#define H_PARTIAL_STORE   16
#define H_PENDING	17	/* returned from H_POLL_PENDING */
#define H_CONTINUE	18	/* Returned from H_Join on success */
#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
						 is a good time to retry */
#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
#define H_HARDWARE	-1	/* Hardware error */
#define H_FUNCTION	-2	/* Function not supported */
#define H_PRIVILEGE	-3	/* Caller not privileged */
#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
#define H_BAD_MODE	-5	/* Illegal msr value */
#define H_PTEG_FULL	-6	/* PTEG is full */
#define H_NOT_FOUND	-7	/* PTE was not found" */
#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
#define H_NO_MEM	-9
#define H_AUTHORITY	-10
#define H_PERMISSION	-11
#define H_DROPPED	-12
#define H_SOURCE_PARM	-13
#define H_DEST_PARM	-14
#define H_REMOTE_PARM	-15
#define H_RESOURCE	-16
#define H_ADAPTER_PARM  -17
#define H_RH_PARM       -18
#define H_RCQ_PARM      -19
#define H_SCQ_PARM      -20
#define H_EQ_PARM       -21
#define H_RT_PARM       -22
#define H_ST_PARM       -23
#define H_SIGT_PARM     -24
#define H_TOKEN_PARM    -25
#define H_MLENGTH_PARM  -27
#define H_MEM_PARM      -28
#define H_MEM_ACCESS_PARM -29
#define H_ATTR_PARM     -30
#define H_PORT_PARM     -31
#define H_MCG_PARM      -32
#define H_VL_PARM       -33
#define H_TSIZE_PARM    -34
#define H_TRACE_PARM    -35

#define H_MASK_PARM     -37
#define H_MCG_FULL      -38
#define H_ALIAS_EXIST   -39
#define H_P_COUNTER     -40
#define H_TABLE_FULL    -41
#define H_ALT_TABLE     -42
#define H_MR_CONDITION  -43
#define H_NOT_ENOUGH_RESOURCES -44
#define H_R_STATE       -45
#define H_RESCINDEND    -46
#define H_MULTI_THREADS_ACTIVE -9005


/* Long Busy is a condition that can be returned by the firmware
 * when a call cannot be completed now, but the identical call
 * should be retried later.  This prevents calls blocking in the
 * firmware for long periods of time.  Annoyingly the firmware can return
 * a range of return codes, hinting at how long we should wait before
 * retrying.  If you don't care for the hint, the macro below is a good
 * way to check for the long_busy return codes
 */
#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
			     && (x <= H_LONG_BUSY_END_RANGE))

/* Flags */
#define H_LARGE_PAGE		(1UL<<(63-16))
#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
#define H_PAGE_STATE_CHANGE	(1UL<<(63-28))
#define H_PAGE_UNUSED		((1UL<<(63-29)) | (1UL<<(63-30)))
#define H_PAGE_SET_UNUSED	(H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
#define H_PAGE_SET_LOANED	(H_PAGE_SET_UNUSED | (1UL<<(63-31)))
#define H_PAGE_SET_ACTIVE	H_PAGE_STATE_CHANGE
#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
#define H_ANDCOND		(1UL<<(63-33))
#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
#define H_COPY_PAGE		(1UL<<(63-49))
#define H_N			(1UL<<(63-61))
#define H_PP1			(1UL<<(63-62))
#define H_PP2			(1UL<<(63-63))

/* VASI States */
#define H_VASI_INVALID          0
#define H_VASI_ENABLED          1
#define H_VASI_ABORTED          2
#define H_VASI_SUSPENDING       3
#define H_VASI_SUSPENDED        4
#define H_VASI_RESUMED          5
#define H_VASI_COMPLETED        6

/* DABRX flags */
#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
#define H_DABRX_KERNEL		(1UL<<(63-62))
#define H_DABRX_USER		(1UL<<(63-63))

/* Each control block has to be on a 4K boundary */
#define H_CB_ALIGNMENT          4096

/* pSeries hypervisor opcodes */
#define H_REMOVE		0x04
#define H_ENTER			0x08
#define H_READ			0x0c
#define H_CLEAR_MOD		0x10
#define H_CLEAR_REF		0x14
#define H_PROTECT		0x18
#define H_GET_TCE		0x1c
#define H_PUT_TCE		0x20
#define H_SET_SPRG0		0x24
#define H_SET_DABR		0x28
#define H_PAGE_INIT		0x2c
#define H_SET_ASR		0x30
#define H_ASR_ON		0x34
#define H_ASR_OFF		0x38
#define H_LOGICAL_CI_LOAD	0x3c
#define H_LOGICAL_CI_STORE	0x40
#define H_LOGICAL_CACHE_LOAD	0x44
#define H_LOGICAL_CACHE_STORE	0x48
#define H_LOGICAL_ICBI		0x4c
#define H_LOGICAL_DCBF		0x50
#define H_GET_TERM_CHAR		0x54
#define H_PUT_TERM_CHAR		0x58
#define H_REAL_TO_LOGICAL	0x5c
#define H_HYPERVISOR_DATA	0x60
#define H_EOI			0x64
#define H_CPPR			0x68
#define H_IPI			0x6c
#define H_IPOLL			0x70
#define H_XIRR			0x74
#define H_PERFMON		0x7c
#define H_MIGRATE_DMA		0x78
#define H_REGISTER_VPA		0xDC
#define H_CEDE			0xE0
#define H_CONFER		0xE4
#define H_PROD			0xE8
#define H_GET_PPP		0xEC
#define H_SET_PPP		0xF0
#define H_PURR			0xF4
#define H_PIC			0xF8
#define H_REG_CRQ		0xFC
#define H_FREE_CRQ		0x100
#define H_VIO_SIGNAL		0x104
#define H_SEND_CRQ		0x108
#define H_COPY_RDMA		0x110
#define H_REGISTER_LOGICAL_LAN	0x114
#define H_FREE_LOGICAL_LAN	0x118
#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
#define H_SEND_LOGICAL_LAN	0x120
#define H_BULK_REMOVE		0x124
#define H_MULTICAST_CTRL	0x130
#define H_SET_XDABR		0x134
#define H_STUFF_TCE		0x138
#define H_PUT_TCE_INDIRECT	0x13C
#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
#define H_VTERM_PARTNER_INFO	0x150
#define H_REGISTER_VTERM	0x154
#define H_FREE_VTERM		0x158
#define H_RESET_EVENTS          0x15C
#define H_ALLOC_RESOURCE        0x160
#define H_FREE_RESOURCE         0x164
#define H_MODIFY_QP             0x168
#define H_QUERY_QP              0x16C
#define H_REREGISTER_PMR        0x170
#define H_REGISTER_SMR          0x174
#define H_QUERY_MR              0x178
#define H_QUERY_MW              0x17C
#define H_QUERY_HCA             0x180
#define H_QUERY_PORT            0x184
#define H_MODIFY_PORT           0x188
#define H_DEFINE_AQP1           0x18C
#define H_GET_TRACE_BUFFER      0x190
#define H_DEFINE_AQP0           0x194
#define H_RESIZE_MR             0x198
#define H_ATTACH_MCQP           0x19C
#define H_DETACH_MCQP           0x1A0
#define H_CREATE_RPT            0x1A4
#define H_REMOVE_RPT            0x1A8
#define H_REGISTER_RPAGES       0x1AC
#define H_DISABLE_AND_GETC      0x1B0
#define H_ERROR_DATA            0x1B4
#define H_GET_HCA_INFO          0x1B8
#define H_GET_PERF_COUNT        0x1BC
#define H_MANAGE_TRACE          0x1C0
#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
#define H_QUERY_INT_STATE       0x1E4
#define H_POLL_PENDING		0x1D8
#define H_ILLAN_ATTRIBUTES	0x244
#define H_MODIFY_HEA_QP		0x250
#define H_QUERY_HEA_QP		0x254
#define H_QUERY_HEA		0x258
#define H_QUERY_HEA_PORT	0x25C
#define H_MODIFY_HEA_PORT	0x260
#define H_REG_BCMC		0x264
#define H_DEREG_BCMC		0x268
#define H_REGISTER_HEA_RPAGES	0x26C
#define H_DISABLE_AND_GET_HEA	0x270
#define H_GET_HEA_INFO		0x274
#define H_ALLOC_HEA_RESOURCE	0x278
#define H_ADD_CONN		0x284
#define H_DEL_CONN		0x288
#define H_JOIN			0x298
#define H_VASI_STATE            0x2A4
#define H_ENABLE_CRQ		0x2B0
#define H_GET_EM_PARMS		0x2B8
#define H_SET_MPP		0x2D0
#define H_GET_MPP		0x2D4
#define H_HOME_NODE_ASSOCIATIVITY 0x2EC
#define H_BEST_ENERGY		0x2F4
#define MAX_HCALL_OPCODE	H_BEST_ENERGY

#ifndef __ASSEMBLY__

/**
 * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
 * @opcode: The hypervisor call to make.
 *
 * This call supports up to 7 arguments and only returns the status of
 * the hcall. Use this version where possible, its slightly faster than
 * the other plpar_hcalls.
 */
long plpar_hcall_norets(unsigned long opcode, ...);

/**
 * plpar_hcall: - Make a pseries hypervisor call
 * @opcode: The hypervisor call to make.
 * @retbuf: Buffer to store up to 4 return arguments in.
 *
 * This call supports up to 6 arguments and 4 return arguments. Use
 * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
 *
 * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
 */
#define PLPAR_HCALL_BUFSIZE 4
long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);

/**
 * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
 * @opcode: The hypervisor call to make.
 * @retbuf: Buffer to store up to 4 return arguments in.
 *
 * This call supports up to 6 arguments and 4 return arguments. Use
 * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
 *
 * Used when phyp interface needs to be called in real mode. Similar to
 * plpar_hcall, but plpar_hcall_raw works in real mode and does not
 * calculate hypervisor call statistics.
 */
long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);

/**
 * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
 * @opcode: The hypervisor call to make.
 * @retbuf: Buffer to store up to 9 return arguments in.
 *
 * This call supports up to 9 arguments and 9 return arguments. Use
 * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
 */
#define PLPAR_HCALL9_BUFSIZE 9
long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...);

/* For hcall instrumentation.  One structure per-hcall, per-CPU */
struct hcall_stats {
	unsigned long	num_calls;	/* number of calls (on this CPU) */
	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
	unsigned long	tb_start;
	unsigned long	purr_start;
};
#define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)

struct hvcall_mpp_data {
	unsigned long entitled_mem;
	unsigned long mapped_mem;
	unsigned short group_num;
	unsigned short pool_num;
	unsigned char mem_weight;
	unsigned char unallocated_mem_weight;
	unsigned long unallocated_entitlement;  /* value in bytes */
	unsigned long pool_size;
	signed long loan_request;
	unsigned long backing_mem;
};

int h_get_mpp(struct hvcall_mpp_data *);

#ifdef CONFIG_PPC_PSERIES
extern int CMO_PrPSP;
extern int CMO_SecPSP;
extern unsigned long CMO_PageSize;

static inline int cmo_get_primary_psp(void)
{
	return CMO_PrPSP;
}

static inline int cmo_get_secondary_psp(void)
{
	return CMO_SecPSP;
}

static inline unsigned long cmo_get_page_size(void)
{
	return CMO_PageSize;
}
#endif /* CONFIG_PPC_PSERIES */

#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */
Commit	Line	Data
d3d2176a DG	1	#ifndef _ASM_POWERPC_HVCALL_H
d3d2176a DG	2	#define _ASM_POWERPC_HVCALL_H
88ced031	3	#ifdef __KERNEL__
1da177e4 LT	4
	5	#define HVSC .long 0x44000022
	6
706c8c93 SB	7	#define H_SUCCESS 0
	8	#define H_BUSY 1 /* Hardware busy -- retry later */
	9	#define H_CLOSED 2 /* Resource closed */
b13a96cf	10	#define H_NOT_AVAILABLE 3
706c8c93	11	#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
b13a96cf	12	#define H_PARTIAL 5
706c8c93	13	#define H_IN_PROGRESS 14 /* Kind of like busy */
b13a96cf HS	14	#define H_PAGE_REGISTERED 15
b13a96cf HS	15	#define H_PARTIAL_STORE 16
706c8c93 SB	16	#define H_PENDING 17 /* returned from H_POLL_PENDING */
	17	#define H_CONTINUE 18 /* Returned from H_Join on success */
	18	#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
	19	#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
	20	is a good time to retry */
	21	#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
	22	is a good time to retry */
	23	#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
	24	is a good time to retry */
	25	#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
	26	is a good time to retry */
	27	#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
	28	is a good time to retry */
	29	#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
	30	is a good time to retry */
	31	#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
	32	#define H_HARDWARE -1 /* Hardware error */
	33	#define H_FUNCTION -2 /* Function not supported */
	34	#define H_PRIVILEGE -3 /* Caller not privileged */
	35	#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
	36	#define H_BAD_MODE -5 /* Illegal msr value */
	37	#define H_PTEG_FULL -6 /* PTEG is full */
	38	#define H_NOT_FOUND -7 /* PTE was not found" */
	39	#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
	40	#define H_NO_MEM -9
	41	#define H_AUTHORITY -10
	42	#define H_PERMISSION -11
	43	#define H_DROPPED -12
	44	#define H_SOURCE_PARM -13
	45	#define H_DEST_PARM -14
	46	#define H_REMOTE_PARM -15
	47	#define H_RESOURCE -16
b13a96cf HS	48	#define H_ADAPTER_PARM -17
	49	#define H_RH_PARM -18
	50	#define H_RCQ_PARM -19
	51	#define H_SCQ_PARM -20
	52	#define H_EQ_PARM -21
	53	#define H_RT_PARM -22
	54	#define H_ST_PARM -23
	55	#define H_SIGT_PARM -24
	56	#define H_TOKEN_PARM -25
	57	#define H_MLENGTH_PARM -27
	58	#define H_MEM_PARM -28
	59	#define H_MEM_ACCESS_PARM -29
	60	#define H_ATTR_PARM -30
	61	#define H_PORT_PARM -31
	62	#define H_MCG_PARM -32
	63	#define H_VL_PARM -33
	64	#define H_TSIZE_PARM -34
	65	#define H_TRACE_PARM -35
	66
	67	#define H_MASK_PARM -37
	68	#define H_MCG_FULL -38
	69	#define H_ALIAS_EXIST -39
	70	#define H_P_COUNTER -40
	71	#define H_TABLE_FULL -41
	72	#define H_ALT_TABLE -42
	73	#define H_MR_CONDITION -43
	74	#define H_NOT_ENOUGH_RESOURCES -44
	75	#define H_R_STATE -45
	76	#define H_RESCINDEND -46
8fe93f8d	77	#define H_MULTI_THREADS_ACTIVE -9005
b13a96cf	78
1da177e4 LT	79
	80	/* Long Busy is a condition that can be returned by the firmware
	81	* when a call cannot be completed now, but the identical call
	82	* should be retried later. This prevents calls blocking in the
706c8c93	83	* firmware for long periods of time. Annoyingly the firmware can return
1da177e4 LT	84	* a range of return codes, hinting at how long we should wait before
	85	* retrying. If you don't care for the hint, the macro below is a good
	86	* way to check for the long_busy return codes
	87	*/
706c8c93 SB	88	#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
706c8c93 SB	89	&& (x <= H_LONG_BUSY_END_RANGE))
1da177e4 LT	90
	91	/* Flags */
	92	#define H_LARGE_PAGE (1UL<<(63-16))
	93	#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
	94	#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
	95	#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */
86630a32 BK	96	#define H_PAGE_STATE_CHANGE (1UL<<(63-28))
	97	#define H_PAGE_UNUSED ((1UL<<(63-29)) \| (1UL<<(63-30)))
	98	#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE \| H_PAGE_UNUSED)
	99	#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED \| (1UL<<(63-31)))
	100	#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
1da177e4 LT	101	#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */
	102	#define H_ANDCOND (1UL<<(63-33))
	103	#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
	104	#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
	105	#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
	106	#define H_COPY_PAGE (1UL<<(63-49))
	107	#define H_N (1UL<<(63-61))
	108	#define H_PP1 (1UL<<(63-62))
	109	#define H_PP2 (1UL<<(63-63))
	110
368a6ba5 DB	111	/* VASI States */
	112	#define H_VASI_INVALID 0
	113	#define H_VASI_ENABLED 1
	114	#define H_VASI_ABORTED 2
	115	#define H_VASI_SUSPENDING 3
	116	#define H_VASI_SUSPENDED 4
	117	#define H_VASI_RESUMED 5
	118	#define H_VASI_COMPLETED 6
	119
fd9648df AB	120	/* DABRX flags */
	121	#define H_DABRX_HYPERVISOR (1UL<<(63-61))
	122	#define H_DABRX_KERNEL (1UL<<(63-62))
	123	#define H_DABRX_USER (1UL<<(63-63))
	124
25985edc	125	/* Each control block has to be on a 4K boundary */
b13a96cf HS	126	#define H_CB_ALIGNMENT 4096
b13a96cf HS	127
1da177e4 LT	128	/* pSeries hypervisor opcodes */
	129	#define H_REMOVE 0x04
	130	#define H_ENTER 0x08
	131	#define H_READ 0x0c
	132	#define H_CLEAR_MOD 0x10
	133	#define H_CLEAR_REF 0x14
	134	#define H_PROTECT 0x18
	135	#define H_GET_TCE 0x1c
	136	#define H_PUT_TCE 0x20
	137	#define H_SET_SPRG0 0x24
	138	#define H_SET_DABR 0x28
	139	#define H_PAGE_INIT 0x2c
	140	#define H_SET_ASR 0x30
	141	#define H_ASR_ON 0x34
	142	#define H_ASR_OFF 0x38
	143	#define H_LOGICAL_CI_LOAD 0x3c
	144	#define H_LOGICAL_CI_STORE 0x40
	145	#define H_LOGICAL_CACHE_LOAD 0x44
	146	#define H_LOGICAL_CACHE_STORE 0x48
	147	#define H_LOGICAL_ICBI 0x4c
	148	#define H_LOGICAL_DCBF 0x50
	149	#define H_GET_TERM_CHAR 0x54
	150	#define H_PUT_TERM_CHAR 0x58
	151	#define H_REAL_TO_LOGICAL 0x5c
	152	#define H_HYPERVISOR_DATA 0x60
	153	#define H_EOI 0x64
	154	#define H_CPPR 0x68
	155	#define H_IPI 0x6c
	156	#define H_IPOLL 0x70
	157	#define H_XIRR 0x74
	158	#define H_PERFMON 0x7c
	159	#define H_MIGRATE_DMA 0x78
	160	#define H_REGISTER_VPA 0xDC
706c8c93	161	#define H_CEDE 0xE0
1da177e4	162	#define H_CONFER 0xE4
706c8c93	163	#define H_PROD 0xE8
1da177e4 LT	164	#define H_GET_PPP 0xEC
	165	#define H_SET_PPP 0xF0
	166	#define H_PURR 0xF4
706c8c93	167	#define H_PIC 0xF8
1da177e4 LT	168	#define H_REG_CRQ 0xFC
	169	#define H_FREE_CRQ 0x100
	170	#define H_VIO_SIGNAL 0x104
	171	#define H_SEND_CRQ 0x108
706c8c93	172	#define H_COPY_RDMA 0x110
cb18bd40 MK	173	#define H_REGISTER_LOGICAL_LAN 0x114
	174	#define H_FREE_LOGICAL_LAN 0x118
	175	#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
	176	#define H_SEND_LOGICAL_LAN 0x120
f03e64f2	177	#define H_BULK_REMOVE 0x124
cb18bd40	178	#define H_MULTICAST_CTRL 0x130
fd9648df	179	#define H_SET_XDABR 0x134
1da177e4 LT	180	#define H_STUFF_TCE 0x138
1da177e4 LT	181	#define H_PUT_TCE_INDIRECT 0x13C
cb18bd40	182	#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
1da177e4 LT	183	#define H_VTERM_PARTNER_INFO 0x150
	184	#define H_REGISTER_VTERM 0x154
	185	#define H_FREE_VTERM 0x158
b13a96cf HS	186	#define H_RESET_EVENTS 0x15C
	187	#define H_ALLOC_RESOURCE 0x160
	188	#define H_FREE_RESOURCE 0x164
	189	#define H_MODIFY_QP 0x168
	190	#define H_QUERY_QP 0x16C
	191	#define H_REREGISTER_PMR 0x170
	192	#define H_REGISTER_SMR 0x174
	193	#define H_QUERY_MR 0x178
	194	#define H_QUERY_MW 0x17C
	195	#define H_QUERY_HCA 0x180
	196	#define H_QUERY_PORT 0x184
	197	#define H_MODIFY_PORT 0x188
	198	#define H_DEFINE_AQP1 0x18C
	199	#define H_GET_TRACE_BUFFER 0x190
	200	#define H_DEFINE_AQP0 0x194
	201	#define H_RESIZE_MR 0x198
	202	#define H_ATTACH_MCQP 0x19C
	203	#define H_DETACH_MCQP 0x1A0
	204	#define H_CREATE_RPT 0x1A4
	205	#define H_REMOVE_RPT 0x1A8
	206	#define H_REGISTER_RPAGES 0x1AC
	207	#define H_DISABLE_AND_GETC 0x1B0
	208	#define H_ERROR_DATA 0x1B4
	209	#define H_GET_HCA_INFO 0x1B8
	210	#define H_GET_PERF_COUNT 0x1BC
	211	#define H_MANAGE_TRACE 0x1C0
cb18bd40	212	#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
b13a96cf	213	#define H_QUERY_INT_STATE 0x1E4
706c8c93	214	#define H_POLL_PENDING 0x1D8
3c0c9e38	215	#define H_ILLAN_ATTRIBUTES 0x244
d95cacc5 AB	216	#define H_MODIFY_HEA_QP 0x250
	217	#define H_QUERY_HEA_QP 0x254
	218	#define H_QUERY_HEA 0x258
	219	#define H_QUERY_HEA_PORT 0x25C
	220	#define H_MODIFY_HEA_PORT 0x260
	221	#define H_REG_BCMC 0x264
	222	#define H_DEREG_BCMC 0x268
	223	#define H_REGISTER_HEA_RPAGES 0x26C
	224	#define H_DISABLE_AND_GET_HEA 0x270
	225	#define H_GET_HEA_INFO 0x274
	226	#define H_ALLOC_HEA_RESOURCE 0x278
	227	#define H_ADD_CONN 0x284
	228	#define H_DEL_CONN 0x288
43ccf202	229	#define H_JOIN 0x298
368a6ba5	230	#define H_VASI_STATE 0x2A4
43ccf202	231	#define H_ENABLE_CRQ 0x2B0
6fe9d1fa	232	#define H_GET_EM_PARMS 0x2B8
dfc3403f NF	233	#define H_SET_MPP 0x2D0
dfc3403f NF	234	#define H_GET_MPP 0x2D4
36f567b4	235	#define H_HOME_NODE_ASSOCIATIVITY 0x2EC
5742bd85 VS	236	#define H_BEST_ENERGY 0x2F4
5742bd85 VS	237	#define MAX_HCALL_OPCODE H_BEST_ENERGY
1da177e4 LT	238
	239	#ifndef __ASSEMBLY__
	240
b9377ffc AB	241	/**
	242	* plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
	243	* @opcode: The hypervisor call to make.
1da177e4	244	*
b9377ffc AB	245	* This call supports up to 7 arguments and only returns the status of
	246	* the hcall. Use this version where possible, its slightly faster than
	247	* the other plpar_hcalls.
1da177e4 LT	248	*/
	249	long plpar_hcall_norets(unsigned long opcode, ...);
	250
b9377ffc AB	251	/**
	252	* plpar_hcall: - Make a pseries hypervisor call
	253	* @opcode: The hypervisor call to make.
	254	* @retbuf: Buffer to store up to 4 return arguments in.
1da177e4	255	*
b9377ffc AB	256	* This call supports up to 6 arguments and 4 return arguments. Use
b9377ffc AB	257	* PLPAR_HCALL_BUFSIZE to size the return argument buffer.
d3d2176a	258	*
b9377ffc	259	* Used for all but the craziest of phyp interfaces (see plpar_hcall9)
1da177e4	260	*/
b9377ffc AB	261	#define PLPAR_HCALL_BUFSIZE 4
b9377ffc AB	262	long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
1da177e4	263
b4aea36b MK	264	/**
	265	* plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
	266	* @opcode: The hypervisor call to make.
	267	* @retbuf: Buffer to store up to 4 return arguments in.
	268	*
	269	* This call supports up to 6 arguments and 4 return arguments. Use
	270	* PLPAR_HCALL_BUFSIZE to size the return argument buffer.
	271	*
	272	* Used when phyp interface needs to be called in real mode. Similar to
	273	* plpar_hcall, but plpar_hcall_raw works in real mode and does not
	274	* calculate hypervisor call statistics.
	275	*/
	276	long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
	277
b9377ffc AB	278	/**
	279	* plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
	280	* @opcode: The hypervisor call to make.
	281	* @retbuf: Buffer to store up to 9 return arguments in.
	282	*
	283	* This call supports up to 9 arguments and 9 return arguments. Use
	284	* PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
	285	*/
	286	#define PLPAR_HCALL9_BUFSIZE 9
	287	long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
f90ece28	288	long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...);
b13a96cf	289
57852a85 MK	290	/* For hcall instrumentation. One structure per-hcall, per-CPU */
	291	struct hcall_stats {
	292	unsigned long num_calls; /* number of calls (on this CPU) */
	293	unsigned long tb_total; /* total wall time (mftb) of calls. */
	294	unsigned long purr_total; /* total cpu time (PURR) of calls. */
c8cd093a AB	295	unsigned long tb_start;
c8cd093a AB	296	unsigned long purr_start;
57852a85	297	};
57852a85 MK	298	#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1)
57852a85 MK	299
dfc3403f NF	300	struct hvcall_mpp_data {
	301	unsigned long entitled_mem;
	302	unsigned long mapped_mem;
	303	unsigned short group_num;
	304	unsigned short pool_num;
	305	unsigned char mem_weight;
	306	unsigned char unallocated_mem_weight;
	307	unsigned long unallocated_entitlement; /* value in bytes */
	308	unsigned long pool_size;
	309	signed long loan_request;
	310	unsigned long backing_mem;
	311	};
	312
	313	int h_get_mpp(struct hvcall_mpp_data *);
81f14997 RJ	314
	315	#ifdef CONFIG_PPC_PSERIES
	316	extern int CMO_PrPSP;
	317	extern int CMO_SecPSP;
	318	extern unsigned long CMO_PageSize;
	319
	320	static inline int cmo_get_primary_psp(void)
	321	{
	322	return CMO_PrPSP;
	323	}
	324
	325	static inline int cmo_get_secondary_psp(void)
	326	{
	327	return CMO_SecPSP;
	328	}
	329
	330	static inline unsigned long cmo_get_page_size(void)
	331	{
	332	return CMO_PageSize;
	333	}
	334	#endif /* CONFIG_PPC_PSERIES */
	335
1da177e4	336	#endif /* __ASSEMBLY__ */
88ced031	337	#endif /* __KERNEL__ */
d3d2176a	338	#endif /* _ASM_POWERPC_HVCALL_H */