]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blame - arch/powerpc/kernel/head_8xx.S
projects / mirror_ubuntu-zesty-kernel.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
powerpc: Remove second definition of STACK_FRAME_OVERHEAD
[mirror_ubuntu-zesty-kernel.git] / arch / powerpc / kernel / head_8xx.S
CommitLineData
14cf11af 1/*
14cf11af
PM		 2 * PowerPC version
3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
4 * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
5 * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
6 * Low-level exception handlers and MMU support
7 * rewritten by Paul Mackerras.
8 * Copyright (C) 1996 Paul Mackerras.
9 * MPC8xx modifications by Dan Malek
10 * Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
11 *
12 * This file contains low-level support and setup for PowerPC 8xx
13 * embedded processors, including trap and interrupt dispatch.
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
19 *
20 */
21
e7039845 22#include <linux/init.h>
14cf11af
PM		 23#include <asm/processor.h>
24#include <asm/page.h>
25#include <asm/mmu.h>
26#include <asm/cache.h>
27#include <asm/pgtable.h>
28#include <asm/cputable.h>
29#include <asm/thread_info.h>
30#include <asm/ppc_asm.h>
31#include <asm/asm-offsets.h>
46f52210 32#include <asm/ptrace.h>
14cf11af
PM		 33
34/* Macro to make the code more readable. */
35#ifdef CONFIG_8xx_CPU6
36#define DO_8xx_CPU6(val, reg) \
37 li reg, val; \
38 stw reg, 12(r0); \
39 lwz reg, 12(r0);
40#else
41#define DO_8xx_CPU6(val, reg)
42#endif
e7039845 43 __HEAD
748a7683
KG		 44_ENTRY(_stext);
45_ENTRY(_start);
14cf11af
PM		 46
47/* MPC8xx
48 * This port was done on an MBX board with an 860. Right now I only
49 * support an ELF compressed (zImage) boot from EPPC-Bug because the
50 * code there loads up some registers before calling us:
51 * r3: ptr to board info data
52 * r4: initrd_start or if no initrd then 0
53 * r5: initrd_end - unused if r4 is 0
54 * r6: Start of command line string
55 * r7: End of command line string
56 *
57 * I decided to use conditional compilation instead of checking PVR and
58 * adding more processor specific branches around code I don't need.
59 * Since this is an embedded processor, I also appreciate any memory
60 * savings I can get.
61 *
62 * The MPC8xx does not have any BATs, but it supports large page sizes.
63 * We first initialize the MMU to support 8M byte pages, then load one
64 * entry into each of the instruction and data TLBs to map the first
65 * 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to
66 * the "internal" processor registers before MMU_init is called.
67 *
68 * The TLB code currently contains a major hack. Since I use the condition
69 * code register, I have to save and restore it. I am out of registers, so
70 * I just store it in memory location 0 (the TLB handlers are not reentrant).
71 * To avoid making any decisions, I need to use the "segment" valid bit
72 * in the first level table, but that would require many changes to the
73 * Linux page directory/table functions that I don't want to do right now.
74 *
14cf11af
PM		 75 * -- Dan
76 */
77 .globl __start
78__start:
79 mr r31,r3 /* save parameters */
80 mr r30,r4
81 mr r29,r5
82 mr r28,r6
83 mr r27,r7
84
85 /* We have to turn on the MMU right away so we get cache modes
86 * set correctly.
87 */
88 bl initial_mmu
89
90/* We now have the lower 8 Meg mapped into TLB entries, and the caches
91 * ready to work.
92 */
93
94turn_on_mmu:
95 mfmsr r0
96 ori r0,r0,MSR_DR|MSR_IR
97 mtspr SPRN_SRR1,r0
98 lis r0,start_here@h
99 ori r0,r0,start_here@l
100 mtspr SPRN_SRR0,r0
101 SYNC
102 rfi /* enables MMU */
103
104/*
105 * Exception entry code. This code runs with address translation
106 * turned off, i.e. using physical addresses.
107 * We assume sprg3 has the physical address of the current
108 * task's thread_struct.
109 */
110#define EXCEPTION_PROLOG \
ee43eb78
BH		 111 mtspr SPRN_SPRG_SCRATCH0,r10; \
112 mtspr SPRN_SPRG_SCRATCH1,r11; \
14cf11af
PM		 113 mfcr r10; \
114 EXCEPTION_PROLOG_1; \
115 EXCEPTION_PROLOG_2
116
117#define EXCEPTION_PROLOG_1 \
118 mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
119 andi. r11,r11,MSR_PR; \
120 tophys(r11,r1); /* use tophys(r1) if kernel */ \
121 beq 1f; \
ee43eb78 122 mfspr r11,SPRN_SPRG_THREAD; \
14cf11af
PM		 123 lwz r11,THREAD_INFO-THREAD(r11); \
124 addi r11,r11,THREAD_SIZE; \
125 tophys(r11,r11); \
1261: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
127
128
129#define EXCEPTION_PROLOG_2 \
130 CLR_TOP32(r11); \
131 stw r10,_CCR(r11); /* save registers */ \
132 stw r12,GPR12(r11); \
133 stw r9,GPR9(r11); \
ee43eb78 134 mfspr r10,SPRN_SPRG_SCRATCH0; \
14cf11af 135 stw r10,GPR10(r11); \
ee43eb78 136 mfspr r12,SPRN_SPRG_SCRATCH1; \
14cf11af
PM		 137 stw r12,GPR11(r11); \
138 mflr r10; \
139 stw r10,_LINK(r11); \
140 mfspr r12,SPRN_SRR0; \
141 mfspr r9,SPRN_SRR1; \
142 stw r1,GPR1(r11); \
143 stw r1,0(r11); \
144 tovirt(r1,r11); /* set new kernel sp */ \
145 li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
146 MTMSRD(r10); /* (except for mach check in rtas) */ \
147 stw r0,GPR0(r11); \
148 SAVE_4GPRS(3, r11); \
149 SAVE_2GPRS(7, r11)
150
151/*
152 * Note: code which follows this uses cr0.eq (set if from kernel),
153 * r11, r12 (SRR0), and r9 (SRR1).
154 *
155 * Note2: once we have set r1 we are in a position to take exceptions
156 * again, and we could thus set MSR:RI at that point.
157 */
158
159/*
160 * Exception vectors.
161 */
162#define EXCEPTION(n, label, hdlr, xfer) \
163 . = n; \
164label: \
165 EXCEPTION_PROLOG; \
166 addi r3,r1,STACK_FRAME_OVERHEAD; \
167 xfer(n, hdlr)
168
169#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
170 li r10,trap; \
d73e0c99 171 stw r10,_TRAP(r11); \
14cf11af
PM		 172 li r10,MSR_KERNEL; \
173 copyee(r10, r9); \
174 bl tfer; \
175i##n: \
176 .long hdlr; \
177 .long ret
178
179#define COPY_EE(d, s) rlwimi d,s,0,16,16
180#define NOCOPY(d, s)
181
182#define EXC_XFER_STD(n, hdlr) \
183 EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
184 ret_from_except_full)
185
186#define EXC_XFER_LITE(n, hdlr) \
187 EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
188 ret_from_except)
189
190#define EXC_XFER_EE(n, hdlr) \
191 EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
192 ret_from_except_full)
193
194#define EXC_XFER_EE_LITE(n, hdlr) \
195 EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
196 ret_from_except)
197
198/* System reset */
dc1c1ca3 199 EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
14cf11af
PM		 200
201/* Machine check */
202 . = 0x200
203MachineCheck:
204 EXCEPTION_PROLOG
205 mfspr r4,SPRN_DAR
206 stw r4,_DAR(r11)
60e071fe
JT		 207 li r5,0x00f0
208 mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */
14cf11af
PM		 209 mfspr r5,SPRN_DSISR
210 stw r5,_DSISR(r11)
211 addi r3,r1,STACK_FRAME_OVERHEAD
dc1c1ca3 212 EXC_XFER_STD(0x200, machine_check_exception)
14cf11af
PM		 213
214/* Data access exception.
215 * This is "never generated" by the MPC8xx. We jump to it for other
216 * translation errors.
217 */
218 . = 0x300
219DataAccess:
220 EXCEPTION_PROLOG
221 mfspr r10,SPRN_DSISR
222 stw r10,_DSISR(r11)
223 mr r5,r10
224 mfspr r4,SPRN_DAR
60e071fe
JT		 225 li r10,0x00f0
226 mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */
14cf11af
PM		 227 EXC_XFER_EE_LITE(0x300, handle_page_fault)
228
229/* Instruction access exception.
230 * This is "never generated" by the MPC8xx. We jump to it for other
231 * translation errors.
232 */
233 . = 0x400
234InstructionAccess:
235 EXCEPTION_PROLOG
236 mr r4,r12
237 mr r5,r9
238 EXC_XFER_EE_LITE(0x400, handle_page_fault)
239
240/* External interrupt */
241 EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
242
243/* Alignment exception */
244 . = 0x600
245Alignment:
246 EXCEPTION_PROLOG
247 mfspr r4,SPRN_DAR
248 stw r4,_DAR(r11)
60e071fe
JT		 249 li r5,0x00f0
250 mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */
14cf11af
PM		 251 mfspr r5,SPRN_DSISR
252 stw r5,_DSISR(r11)
253 addi r3,r1,STACK_FRAME_OVERHEAD
dc1c1ca3 254 EXC_XFER_EE(0x600, alignment_exception)
14cf11af
PM		 255
256/* Program check exception */
dc1c1ca3 257 EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
14cf11af
PM		 258
259/* No FPU on MPC8xx. This exception is not supposed to happen.
260*/
dc1c1ca3 261 EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
14cf11af
PM		 262
263/* Decrementer */
264 EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
265
dc1c1ca3
SR		 266 EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
267 EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 268
269/* System call */
270 . = 0xc00
271SystemCall:
272 EXCEPTION_PROLOG
273 EXC_XFER_EE_LITE(0xc00, DoSyscall)
274
275/* Single step - not used on 601 */
dc1c1ca3
SR		 276 EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
277 EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
278 EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 279
280/* On the MPC8xx, this is a software emulation interrupt. It occurs
281 * for all unimplemented and illegal instructions.
282 */
283 EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
284
285 . = 0x1100
286/*
287 * For the MPC8xx, this is a software tablewalk to load the instruction
288 * TLB. It is modelled after the example in the Motorola manual. The task
289 * switch loads the M_TWB register with the pointer to the first level table.
290 * If we discover there is no second level table (value is zero) or if there
291 * is an invalid pte, we load that into the TLB, which causes another fault
292 * into the TLB Error interrupt where we can handle such problems.
293 * We have to use the MD_xxx registers for the tablewalk because the
294 * equivalent MI_xxx registers only perform the attribute functions.
295 */
296InstructionTLBMiss:
297#ifdef CONFIG_8xx_CPU6
298 stw r3, 8(r0)
299#endif
300 DO_8xx_CPU6(0x3f80, r3)
301 mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
302 mfcr r10
469d62be 303#ifdef CONFIG_8xx_CPU6
14cf11af
PM		 304 stw r10, 0(r0)
305 stw r11, 4(r0)
469d62be
JT		 306#else
307 mtspr SPRN_DAR, r10
308 mtspr SPRN_SPRG2, r11
309#endif
14cf11af 310 mfspr r10, SPRN_SRR0 /* Get effective address of fault */
74016852
SW		 311#ifdef CONFIG_8xx_CPU15
312 addi r11, r10, 0x1000
313 tlbie r11
314 addi r11, r10, -0x1000
315 tlbie r11
316#endif
14cf11af
PM		 317 DO_8xx_CPU6(0x3780, r3)
318 mtspr SPRN_MD_EPN, r10 /* Have to use MD_EPN for walk, MI_EPN can't */
319 mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
320
321 /* If we are faulting a kernel address, we have to use the
322 * kernel page tables.
323 */
4afb0be7
JT		 324#ifdef CONFIG_MODULES
325 /* Only modules will cause ITLB Misses as we always
326 * pin the first 8MB of kernel memory */
14cf11af
PM		 327 andi. r11, r10, 0x0800 /* Address >= 0x80000000 */
328 beq 3f
329 lis r11, swapper_pg_dir@h
330 ori r11, r11, swapper_pg_dir@l
331 rlwimi r10, r11, 0, 2, 19
3323:
4afb0be7 333#endif
14cf11af
PM		 334 lwz r11, 0(r10) /* Get the level 1 entry */
335 rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
336 beq 2f /* If zero, don't try to find a pte */
337
338 /* We have a pte table, so load the MI_TWC with the attributes
339 * for this "segment."
340 */
341 ori r11,r11,1 /* Set valid bit */
342 DO_8xx_CPU6(0x2b80, r3)
343 mtspr SPRN_MI_TWC, r11 /* Set segment attributes */
344 DO_8xx_CPU6(0x3b80, r3)
345 mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
346 mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
347 lwz r10, 0(r11) /* Get the pte */
348
d069cb43 349#ifdef CONFIG_SWAP
fe11dc3f
JT		 350 andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
351 cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
352 bne- cr0, 2f
d069cb43 353#endif
14cf11af 354 /* The Linux PTE won't go exactly into the MMU TLB.
fe1691e3 355 * Software indicator bits 21 and 28 must be clear.
14cf11af
PM		 356 * Software indicator bits 24, 25, 26, and 27 must be
357 * set. All other Linux PTE bits control the behavior
358 * of the MMU.
359 */
fe11dc3f 360 li r11, 0x00f0
fe1691e3 361 rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */
14cf11af
PM		 362 DO_8xx_CPU6(0x2d80, r3)
363 mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
364
469d62be
JT		 365 /* Restore registers */
366#ifndef CONFIG_8xx_CPU6
367 mfspr r10, SPRN_DAR
368 mtcr r10
369 mtspr SPRN_DAR, r11 /* Tag DAR */
370 mfspr r11, SPRN_SPRG2
371#else
14cf11af
PM		 372 lwz r11, 0(r0)
373 mtcr r11
374 lwz r11, 4(r0)
14cf11af
PM		 375 lwz r3, 8(r0)
376#endif
469d62be 377 mfspr r10, SPRN_M_TW
14cf11af 378 rfi
fe11dc3f
JT		 3792:
380 mfspr r11, SPRN_SRR1
381 /* clear all error bits as TLB Miss
382 * sets a few unconditionally
383 */
384 rlwinm r11, r11, 0, 0xffff
385 mtspr SPRN_SRR1, r11
386
469d62be
JT		 387 /* Restore registers */
388#ifndef CONFIG_8xx_CPU6
389 mfspr r10, SPRN_DAR
390 mtcr r10
391 li r11, 0x00f0
392 mtspr SPRN_DAR, r11 /* Tag DAR */
393 mfspr r11, SPRN_SPRG2
394#else
fe11dc3f
JT		 395 lwz r11, 0(r0)
396 mtcr r11
397 lwz r11, 4(r0)
fe11dc3f
JT		 398 lwz r3, 8(r0)
399#endif
469d62be 400 mfspr r10, SPRN_M_TW
fe11dc3f 401 b InstructionAccess
14cf11af
PM		 402
403 . = 0x1200
404DataStoreTLBMiss:
405#ifdef CONFIG_8xx_CPU6
406 stw r3, 8(r0)
407#endif
408 DO_8xx_CPU6(0x3f80, r3)
409 mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
410 mfcr r10
469d62be 411#ifdef CONFIG_8xx_CPU6
14cf11af
PM		 412 stw r10, 0(r0)
413 stw r11, 4(r0)
469d62be
JT		 414#else
415 mtspr SPRN_DAR, r10
416 mtspr SPRN_SPRG2, r11
417#endif
14cf11af
PM		 418 mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
419
420 /* If we are faulting a kernel address, we have to use the
421 * kernel page tables.
422 */
423 andi. r11, r10, 0x0800
424 beq 3f
425 lis r11, swapper_pg_dir@h
426 ori r11, r11, swapper_pg_dir@l
427 rlwimi r10, r11, 0, 2, 19
4283:
429 lwz r11, 0(r10) /* Get the level 1 entry */
430 rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
431 beq 2f /* If zero, don't try to find a pte */
432
433 /* We have a pte table, so load fetch the pte from the table.
434 */
435 ori r11, r11, 1 /* Set valid bit in physical L2 page */
436 DO_8xx_CPU6(0x3b80, r3)
437 mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
438 mfspr r10, SPRN_MD_TWC /* ....and get the pte address */
439 lwz r10, 0(r10) /* Get the pte */
440
441 /* Insert the Guarded flag into the TWC from the Linux PTE.
442 * It is bit 27 of both the Linux PTE and the TWC (at least
443 * I got that right :-). It will be better when we can put
444 * this into the Linux pgd/pmd and load it in the operation
445 * above.
446 */
447 rlwimi r11, r10, 0, 27, 27
0c466169
JT		 448 /* Insert the WriteThru flag into the TWC from the Linux PTE.
449 * It is bit 25 in the Linux PTE and bit 30 in the TWC
450 */
451 rlwimi r11, r10, 32-5, 30, 30
14cf11af
PM		 452 DO_8xx_CPU6(0x3b80, r3)
453 mtspr SPRN_MD_TWC, r11
454
fe11dc3f
JT		 455 /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
456 * We also need to know if the insn is a load/store, so:
457 * Clear _PAGE_PRESENT and load that which will
458 * trap into DTLB Error with store bit set accordinly.
459 */
460 /* PRESENT=0x1, ACCESSED=0x20
461 * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
462 * r10 = (r10 & ~PRESENT) | r11;
463 */
d069cb43 464#ifdef CONFIG_SWAP
990d89c6 465 rlwinm r11, r10, 32-5, _PAGE_PRESENT
fe11dc3f 466 and r11, r11, r10
990d89c6 467 rlwimi r10, r11, 0, _PAGE_PRESENT
d069cb43 468#endif
fe11dc3f 469 /* Honour kernel RO, User NA */
990d89c6 470 /* 0x200 == Extended encoding, bit 22 */
fe1691e3 471 rlwimi r10, r10, 32-2, 0x200 /* Copy USER to bit 22, 0x200 */
990d89c6
JT		 472 /* r11 = (r10 & _PAGE_RW) >> 1 */
473 rlwinm r11, r10, 32-1, 0x200
474 or r10, r11, r10
475 /* invert RW and 0x200 bits */
476 xori r10, r10, _PAGE_RW | 0x200
14cf11af
PM		 477
478 /* The Linux PTE won't go exactly into the MMU TLB.
fe11dc3f 479 * Software indicator bits 22 and 28 must be clear.
14cf11af
PM		 480 * Software indicator bits 24, 25, 26, and 27 must be
481 * set. All other Linux PTE bits control the behavior
482 * of the MMU.
483 */
4842: li r11, 0x00f0
485 rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
486 DO_8xx_CPU6(0x3d80, r3)
487 mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
488
469d62be
JT		 489 /* Restore registers */
490#ifndef CONFIG_8xx_CPU6
491 mfspr r10, SPRN_DAR
492 mtcr r10
493 mtspr SPRN_DAR, r11 /* Tag DAR */
494 mfspr r11, SPRN_SPRG2
495#else
496 mtspr SPRN_DAR, r11 /* Tag DAR */
14cf11af
PM		 497 lwz r11, 0(r0)
498 mtcr r11
499 lwz r11, 4(r0)
14cf11af
PM		 500 lwz r3, 8(r0)
501#endif
469d62be 502 mfspr r10, SPRN_M_TW
14cf11af
PM		 503 rfi
504
505/* This is an instruction TLB error on the MPC8xx. This could be due
506 * to many reasons, such as executing guarded memory or illegal instruction
507 * addresses. There is nothing to do but handle a big time error fault.
508 */
509 . = 0x1300
510InstructionTLBError:
511 b InstructionAccess
512
513/* This is the data TLB error on the MPC8xx. This could be due to
514 * many reasons, including a dirty update to a pte. We can catch that
515 * one here, but anything else is an error. First, we track down the
516 * Linux pte. If it is valid, write access is allowed, but the
517 * page dirty bit is not set, we will set it and reload the TLB. For
518 * any other case, we bail out to a higher level function that can
519 * handle it.
520 */
521 . = 0x1400
522DataTLBError:
523#ifdef CONFIG_8xx_CPU6
524 stw r3, 8(r0)
525#endif
526 DO_8xx_CPU6(0x3f80, r3)
527 mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
528 mfcr r10
529 stw r10, 0(r0)
530 stw r11, 4(r0)
531
60e071fe
JT		 532 mfspr r10, SPRN_DAR
533 cmpwi cr0, r10, 0x00f0
0a2ab51f
JT		 534 beq- FixupDAR /* must be a buggy dcbX, icbi insn. */
535DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */
14cf11af
PM		 536 mfspr r10, SPRN_M_TW /* Restore registers */
537 lwz r11, 0(r0)
538 mtcr r11
539 lwz r11, 4(r0)
540#ifdef CONFIG_8xx_CPU6
541 lwz r3, 8(r0)
542#endif
543 b DataAccess
544
dc1c1ca3
SR		 545 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
546 EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
547 EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
548 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
549 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
550 EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
551 EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 552
553/* On the MPC8xx, these next four traps are used for development
554 * support of breakpoints and such. Someday I will get around to
555 * using them.
556 */
dc1c1ca3
SR		 557 EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
558 EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
559 EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
560 EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
14cf11af
PM		 561
562 . = 0x2000
563
0a2ab51f
JT		 564/* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions
565 * by decoding the registers used by the dcbx instruction and adding them.
566 * DAR is set to the calculated address and r10 also holds the EA on exit.
567 */
568 /* define if you don't want to use self modifying code */
569#define NO_SELF_MODIFYING_CODE
570FixupDAR:/* Entry point for dcbx workaround. */
571 /* fetch instruction from memory. */
572 mfspr r10, SPRN_SRR0
061ec959 573 andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
0a2ab51f
JT		 574 DO_8xx_CPU6(0x3780, r3)
575 mtspr SPRN_MD_EPN, r10
576 mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */
061ec959 577 beq- 3f /* Branch if user space */
0a2ab51f
JT		 578 lis r11, (swapper_pg_dir-PAGE_OFFSET)@h
579 ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
580 rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
5813: lwz r11, 0(r11) /* Get the level 1 entry */
582 DO_8xx_CPU6(0x3b80, r3)
583 mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
584 mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
585 lwz r11, 0(r11) /* Get the pte */
586 /* concat physical page address(r11) and page offset(r10) */
587 rlwimi r11, r10, 0, 20, 31
588 lwz r11,0(r11)
589/* Check if it really is a dcbx instruction. */
590/* dcbt and dcbtst does not generate DTLB Misses/Errors,
591 * no need to include them here */
592 srwi r10, r11, 26 /* check if major OP code is 31 */
593 cmpwi cr0, r10, 31
594 bne- 141f
595 rlwinm r10, r11, 0, 21, 30
596 cmpwi cr0, r10, 2028 /* Is dcbz? */
597 beq+ 142f
598 cmpwi cr0, r10, 940 /* Is dcbi? */
599 beq+ 142f
600 cmpwi cr0, r10, 108 /* Is dcbst? */
601 beq+ 144f /* Fix up store bit! */
602 cmpwi cr0, r10, 172 /* Is dcbf? */
603 beq+ 142f
604 cmpwi cr0, r10, 1964 /* Is icbi? */
605 beq+ 142f
606141: mfspr r10, SPRN_DAR /* r10 must hold DAR at exit */
607 b DARFixed /* Nope, go back to normal TLB processing */
608
609144: mfspr r10, SPRN_DSISR
610 rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */
611 mtspr SPRN_DSISR, r10
612142: /* continue, it was a dcbx, dcbi instruction. */
613#ifdef CONFIG_8xx_CPU6
614 lwz r3, 8(r0) /* restore r3 from memory */
615#endif
616#ifndef NO_SELF_MODIFYING_CODE
617 andis. r10,r11,0x1f /* test if reg RA is r0 */
618 li r10,modified_instr@l
619 dcbtst r0,r10 /* touch for store */
620 rlwinm r11,r11,0,0,20 /* Zero lower 10 bits */
621 oris r11,r11,640 /* Transform instr. to a "add r10,RA,RB" */
622 ori r11,r11,532
623 stw r11,0(r10) /* store add/and instruction */
624 dcbf 0,r10 /* flush new instr. to memory. */
625 icbi 0,r10 /* invalidate instr. cache line */
626 lwz r11, 4(r0) /* restore r11 from memory */
627 mfspr r10, SPRN_M_TW /* restore r10 from M_TW */
628 isync /* Wait until new instr is loaded from memory */
629modified_instr:
630 .space 4 /* this is where the add instr. is stored */
631 bne+ 143f
632 subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */
633143: mtdar r10 /* store faulting EA in DAR */
634 b DARFixed /* Go back to normal TLB handling */
635#else
636 mfctr r10
637 mtdar r10 /* save ctr reg in DAR */
638 rlwinm r10, r11, 24, 24, 28 /* offset into jump table for reg RB */
639 addi r10, r10, 150f@l /* add start of table */
640 mtctr r10 /* load ctr with jump address */
641 xor r10, r10, r10 /* sum starts at zero */
642 bctr /* jump into table */
643150:
644 add r10, r10, r0 ;b 151f
645 add r10, r10, r1 ;b 151f
646 add r10, r10, r2 ;b 151f
647 add r10, r10, r3 ;b 151f
648 add r10, r10, r4 ;b 151f
649 add r10, r10, r5 ;b 151f
650 add r10, r10, r6 ;b 151f
651 add r10, r10, r7 ;b 151f
652 add r10, r10, r8 ;b 151f
653 add r10, r10, r9 ;b 151f
654 mtctr r11 ;b 154f /* r10 needs special handling */
655 mtctr r11 ;b 153f /* r11 needs special handling */
656 add r10, r10, r12 ;b 151f
657 add r10, r10, r13 ;b 151f
658 add r10, r10, r14 ;b 151f
659 add r10, r10, r15 ;b 151f
660 add r10, r10, r16 ;b 151f
661 add r10, r10, r17 ;b 151f
662 add r10, r10, r18 ;b 151f
663 add r10, r10, r19 ;b 151f
664 add r10, r10, r20 ;b 151f
665 add r10, r10, r21 ;b 151f
666 add r10, r10, r22 ;b 151f
667 add r10, r10, r23 ;b 151f
668 add r10, r10, r24 ;b 151f
669 add r10, r10, r25 ;b 151f
670 add r10, r10, r26 ;b 151f
671 add r10, r10, r27 ;b 151f
672 add r10, r10, r28 ;b 151f
673 add r10, r10, r29 ;b 151f
674 add r10, r10, r30 ;b 151f
675 add r10, r10, r31
676151:
677 rlwinm. r11,r11,19,24,28 /* offset into jump table for reg RA */
678 beq 152f /* if reg RA is zero, don't add it */
679 addi r11, r11, 150b@l /* add start of table */
680 mtctr r11 /* load ctr with jump address */
681 rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */
682 bctr /* jump into table */
683152:
684 mfdar r11
685 mtctr r11 /* restore ctr reg from DAR */
686 mtdar r10 /* save fault EA to DAR */
687 b DARFixed /* Go back to normal TLB handling */
688
689 /* special handling for r10,r11 since these are modified already */
690153: lwz r11, 4(r0) /* load r11 from memory */
691 b 155f
692154: mfspr r11, SPRN_M_TW /* load r10 from M_TW */
693155: add r10, r10, r11 /* add it */
694 mfctr r11 /* restore r11 */
695 b 151b
696#endif
697
14cf11af
PM		 698 .globl giveup_fpu
699giveup_fpu:
700 blr
701
702/*
703 * This is where the main kernel code starts.
704 */
705start_here:
706 /* ptr to current */
707 lis r2,init_task@h
708 ori r2,r2,init_task@l
709
710 /* ptr to phys current thread */
711 tophys(r4,r2)
712 addi r4,r4,THREAD /* init task's THREAD */
ee43eb78 713 mtspr SPRN_SPRG_THREAD,r4
14cf11af
PM		 714
715 /* stack */
716 lis r1,init_thread_union@ha
717 addi r1,r1,init_thread_union@l
718 li r0,0
719 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
720
721 bl early_init /* We have to do this with MMU on */
722
723/*
724 * Decide what sort of machine this is and initialize the MMU.
725 */
726 mr r3,r31
727 mr r4,r30
728 mr r5,r29
729 mr r6,r28
730 mr r7,r27
731 bl machine_init
732 bl MMU_init
733
734/*
735 * Go back to running unmapped so we can load up new values
736 * and change to using our exception vectors.
737 * On the 8xx, all we have to do is invalidate the TLB to clear
738 * the old 8M byte TLB mappings and load the page table base register.
739 */
740 /* The right way to do this would be to track it down through
741 * init's THREAD like the context switch code does, but this is
742 * easier......until someone changes init's static structures.
743 */
744 lis r6, swapper_pg_dir@h
745 ori r6, r6, swapper_pg_dir@l
746 tophys(r6,r6)
747#ifdef CONFIG_8xx_CPU6
748 lis r4, cpu6_errata_word@h
749 ori r4, r4, cpu6_errata_word@l
750 li r3, 0x3980
751 stw r3, 12(r4)
752 lwz r3, 12(r4)
753#endif
754 mtspr SPRN_M_TWB, r6
755 lis r4,2f@h
756 ori r4,r4,2f@l
757 tophys(r4,r4)
758 li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
759 mtspr SPRN_SRR0,r4
760 mtspr SPRN_SRR1,r3
761 rfi
762/* Load up the kernel context */
7632:
764 SYNC /* Force all PTE updates to finish */
765 tlbia /* Clear all TLB entries */
766 sync /* wait for tlbia/tlbie to finish */
767 TLBSYNC /* ... on all CPUs */
768
769 /* set up the PTE pointers for the Abatron bdiGDB.
770 */
771 tovirt(r6,r6)
772 lis r5, abatron_pteptrs@h
773 ori r5, r5, abatron_pteptrs@l
774 stw r5, 0xf0(r0) /* Must match your Abatron config file */
775 tophys(r5,r5)
776 stw r6, 0(r5)
777
778/* Now turn on the MMU for real! */
779 li r4,MSR_KERNEL
780 lis r3,start_kernel@h
781 ori r3,r3,start_kernel@l
782 mtspr SPRN_SRR0,r3
783 mtspr SPRN_SRR1,r4
784 rfi /* enable MMU and jump to start_kernel */
785
786/* Set up the initial MMU state so we can do the first level of
787 * kernel initialization. This maps the first 8 MBytes of memory 1:1
788 * virtual to physical. Also, set the cache mode since that is defined
789 * by TLB entries and perform any additional mapping (like of the IMMR).
790 * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
791 * 24 Mbytes of data, and the 8M IMMR space. Anything not covered by
792 * these mappings is mapped by page tables.
793 */
794initial_mmu:
795 tlbia /* Invalidate all TLB entries */
9f4f04ba
JT		 796/* Always pin the first 8 MB ITLB to prevent ITLB
797 misses while mucking around with SRR0/SRR1 in asm
798*/
14cf11af
PM		 799 lis r8, MI_RSV4I@h
800 ori r8, r8, 0x1c00
9f4f04ba 801
14cf11af
PM		 802 mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
803
804#ifdef CONFIG_PIN_TLB
805 lis r10, (MD_RSV4I | MD_RESETVAL)@h
806 ori r10, r10, 0x1c00
807 mr r8, r10
808#else
809 lis r10, MD_RESETVAL@h
810#endif
811#ifndef CONFIG_8xx_COPYBACK
812 oris r10, r10, MD_WTDEF@h
813#endif
814 mtspr SPRN_MD_CTR, r10 /* Set data TLB control */
815
816 /* Now map the lower 8 Meg into the TLBs. For this quick hack,
817 * we can load the instruction and data TLB registers with the
818 * same values.
819 */
820 lis r8, KERNELBASE@h /* Create vaddr for TLB */
821 ori r8, r8, MI_EVALID /* Mark it valid */
822 mtspr SPRN_MI_EPN, r8
823 mtspr SPRN_MD_EPN, r8
824 li r8, MI_PS8MEG /* Set 8M byte page */
825 ori r8, r8, MI_SVALID /* Make it valid */
826 mtspr SPRN_MI_TWC, r8
827 mtspr SPRN_MD_TWC, r8
828 li r8, MI_BOOTINIT /* Create RPN for address 0 */
829 mtspr SPRN_MI_RPN, r8 /* Store TLB entry */
830 mtspr SPRN_MD_RPN, r8
831 lis r8, MI_Kp@h /* Set the protection mode */
832 mtspr SPRN_MI_AP, r8
833 mtspr SPRN_MD_AP, r8
834
835 /* Map another 8 MByte at the IMMR to get the processor
836 * internal registers (among other things).
837 */
838#ifdef CONFIG_PIN_TLB
839 addi r10, r10, 0x0100
840 mtspr SPRN_MD_CTR, r10
841#endif
842 mfspr r9, 638 /* Get current IMMR */
843 andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */
844
845 mr r8, r9 /* Create vaddr for TLB */
846 ori r8, r8, MD_EVALID /* Mark it valid */
847 mtspr SPRN_MD_EPN, r8
848 li r8, MD_PS8MEG /* Set 8M byte page */
849 ori r8, r8, MD_SVALID /* Make it valid */
850 mtspr SPRN_MD_TWC, r8
851 mr r8, r9 /* Create paddr for TLB */
852 ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
853 mtspr SPRN_MD_RPN, r8
854
855#ifdef CONFIG_PIN_TLB
856 /* Map two more 8M kernel data pages.
857 */
858 addi r10, r10, 0x0100
859 mtspr SPRN_MD_CTR, r10
860
861 lis r8, KERNELBASE@h /* Create vaddr for TLB */
862 addis r8, r8, 0x0080 /* Add 8M */
863 ori r8, r8, MI_EVALID /* Mark it valid */
864 mtspr SPRN_MD_EPN, r8
865 li r9, MI_PS8MEG /* Set 8M byte page */
866 ori r9, r9, MI_SVALID /* Make it valid */
867 mtspr SPRN_MD_TWC, r9
868 li r11, MI_BOOTINIT /* Create RPN for address 0 */
869 addis r11, r11, 0x0080 /* Add 8M */
ccf0d68e 870 mtspr SPRN_MD_RPN, r11
14cf11af
PM		 871
872 addis r8, r8, 0x0080 /* Add 8M */
873 mtspr SPRN_MD_EPN, r8
874 mtspr SPRN_MD_TWC, r9
875 addis r11, r11, 0x0080 /* Add 8M */
ccf0d68e 876 mtspr SPRN_MD_RPN, r11
14cf11af
PM		 877#endif
878
879 /* Since the cache is enabled according to the information we
880 * just loaded into the TLB, invalidate and enable the caches here.
881 * We should probably check/set other modes....later.
882 */
883 lis r8, IDC_INVALL@h
884 mtspr SPRN_IC_CST, r8
885 mtspr SPRN_DC_CST, r8
886 lis r8, IDC_ENABLE@h
887 mtspr SPRN_IC_CST, r8
888#ifdef CONFIG_8xx_COPYBACK
889 mtspr SPRN_DC_CST, r8
890#else
891 /* For a debug option, I left this here to easily enable
892 * the write through cache mode
893 */
894 lis r8, DC_SFWT@h
895 mtspr SPRN_DC_CST, r8
896 lis r8, IDC_ENABLE@h
897 mtspr SPRN_DC_CST, r8
898#endif
899 blr
900
901
902/*
903 * Set up to use a given MMU context.
904 * r3 is context number, r4 is PGD pointer.
905 *
906 * We place the physical address of the new task page directory loaded
907 * into the MMU base register, and set the ASID compare register with
908 * the new "context."
909 */
910_GLOBAL(set_context)
911
912#ifdef CONFIG_BDI_SWITCH
913 /* Context switch the PTE pointer for the Abatron BDI2000.
914 * The PGDIR is passed as second argument.
915 */
916 lis r5, KERNELBASE@h
917 lwz r5, 0xf0(r5)
918 stw r4, 0x4(r5)
919#endif
920
921#ifdef CONFIG_8xx_CPU6
922 lis r6, cpu6_errata_word@h
923 ori r6, r6, cpu6_errata_word@l
924 tophys (r4, r4)
925 li r7, 0x3980
926 stw r7, 12(r6)
927 lwz r7, 12(r6)
928 mtspr SPRN_M_TWB, r4 /* Update MMU base address */
929 li r7, 0x3380
930 stw r7, 12(r6)
931 lwz r7, 12(r6)
932 mtspr SPRN_M_CASID, r3 /* Update context */
933#else
934 mtspr SPRN_M_CASID,r3 /* Update context */
935 tophys (r4, r4)
936 mtspr SPRN_M_TWB, r4 /* and pgd */
937#endif
938 SYNC
939 blr
940
941#ifdef CONFIG_8xx_CPU6
942/* It's here because it is unique to the 8xx.
943 * It is important we get called with interrupts disabled. I used to
944 * do that, but it appears that all code that calls this already had
945 * interrupt disabled.
946 */
947 .globl set_dec_cpu6
948set_dec_cpu6:
949 lis r7, cpu6_errata_word@h
950 ori r7, r7, cpu6_errata_word@l
951 li r4, 0x2c00
952 stw r4, 8(r7)
953 lwz r4, 8(r7)
954 mtspr 22, r3 /* Update Decrementer */
955 SYNC
956 blr
957#endif
958
959/*
960 * We put a few things here that have to be page-aligned.
961 * This stuff goes at the beginning of the data segment,
962 * which is page-aligned.
963 */
964 .data
965 .globl sdata
966sdata:
967 .globl empty_zero_page
968empty_zero_page:
969 .space 4096
970
971 .globl swapper_pg_dir
972swapper_pg_dir:
973 .space 4096
974
14cf11af
PM		 975/* Room for two PTE table poiners, usually the kernel and current user
976 * pointer to their respective root page table (pgdir).
977 */
978abatron_pteptrs:
979 .space 8
980
981#ifdef CONFIG_8xx_CPU6
982 .globl cpu6_errata_word
983cpu6_errata_word:
984 .space 16
985#endif
986
ubuntu-zesty-kernel mirror