]>
Commit | Line | Data |
---|---|---|
14cf11af | 1 | /* |
14cf11af PM |
2 | * PowerPC version |
3 | * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | |
4 | * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP | |
5 | * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> | |
6 | * Low-level exception handlers and MMU support | |
7 | * rewritten by Paul Mackerras. | |
8 | * Copyright (C) 1996 Paul Mackerras. | |
9 | * MPC8xx modifications by Dan Malek | |
10 | * Copyright (C) 1997 Dan Malek (dmalek@jlc.net). | |
11 | * | |
12 | * This file contains low-level support and setup for PowerPC 8xx | |
13 | * embedded processors, including trap and interrupt dispatch. | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or | |
16 | * modify it under the terms of the GNU General Public License | |
17 | * as published by the Free Software Foundation; either version | |
18 | * 2 of the License, or (at your option) any later version. | |
19 | * | |
20 | */ | |
21 | ||
e7039845 | 22 | #include <linux/init.h> |
14cf11af PM |
23 | #include <asm/processor.h> |
24 | #include <asm/page.h> | |
25 | #include <asm/mmu.h> | |
26 | #include <asm/cache.h> | |
27 | #include <asm/pgtable.h> | |
28 | #include <asm/cputable.h> | |
29 | #include <asm/thread_info.h> | |
30 | #include <asm/ppc_asm.h> | |
31 | #include <asm/asm-offsets.h> | |
46f52210 | 32 | #include <asm/ptrace.h> |
14cf11af PM |
33 | |
34 | /* Macro to make the code more readable. */ | |
35 | #ifdef CONFIG_8xx_CPU6 | |
36 | #define DO_8xx_CPU6(val, reg) \ | |
37 | li reg, val; \ | |
38 | stw reg, 12(r0); \ | |
39 | lwz reg, 12(r0); | |
40 | #else | |
41 | #define DO_8xx_CPU6(val, reg) | |
42 | #endif | |
e7039845 | 43 | __HEAD |
748a7683 KG |
44 | _ENTRY(_stext); |
45 | _ENTRY(_start); | |
14cf11af PM |
46 | |
47 | /* MPC8xx | |
48 | * This port was done on an MBX board with an 860. Right now I only | |
49 | * support an ELF compressed (zImage) boot from EPPC-Bug because the | |
50 | * code there loads up some registers before calling us: | |
51 | * r3: ptr to board info data | |
52 | * r4: initrd_start or if no initrd then 0 | |
53 | * r5: initrd_end - unused if r4 is 0 | |
54 | * r6: Start of command line string | |
55 | * r7: End of command line string | |
56 | * | |
57 | * I decided to use conditional compilation instead of checking PVR and | |
58 | * adding more processor specific branches around code I don't need. | |
59 | * Since this is an embedded processor, I also appreciate any memory | |
60 | * savings I can get. | |
61 | * | |
62 | * The MPC8xx does not have any BATs, but it supports large page sizes. | |
63 | * We first initialize the MMU to support 8M byte pages, then load one | |
64 | * entry into each of the instruction and data TLBs to map the first | |
65 | * 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to | |
66 | * the "internal" processor registers before MMU_init is called. | |
67 | * | |
68 | * The TLB code currently contains a major hack. Since I use the condition | |
69 | * code register, I have to save and restore it. I am out of registers, so | |
70 | * I just store it in memory location 0 (the TLB handlers are not reentrant). | |
71 | * To avoid making any decisions, I need to use the "segment" valid bit | |
72 | * in the first level table, but that would require many changes to the | |
73 | * Linux page directory/table functions that I don't want to do right now. | |
74 | * | |
14cf11af PM |
75 | * -- Dan |
76 | */ | |
77 | .globl __start | |
78 | __start: | |
6dece0eb | 79 | mr r31,r3 /* save device tree ptr */ |
14cf11af PM |
80 | |
81 | /* We have to turn on the MMU right away so we get cache modes | |
82 | * set correctly. | |
83 | */ | |
84 | bl initial_mmu | |
85 | ||
86 | /* We now have the lower 8 Meg mapped into TLB entries, and the caches | |
87 | * ready to work. | |
88 | */ | |
89 | ||
90 | turn_on_mmu: | |
91 | mfmsr r0 | |
92 | ori r0,r0,MSR_DR|MSR_IR | |
93 | mtspr SPRN_SRR1,r0 | |
94 | lis r0,start_here@h | |
95 | ori r0,r0,start_here@l | |
96 | mtspr SPRN_SRR0,r0 | |
97 | SYNC | |
98 | rfi /* enables MMU */ | |
99 | ||
100 | /* | |
101 | * Exception entry code. This code runs with address translation | |
102 | * turned off, i.e. using physical addresses. | |
103 | * We assume sprg3 has the physical address of the current | |
104 | * task's thread_struct. | |
105 | */ | |
106 | #define EXCEPTION_PROLOG \ | |
ee43eb78 BH |
107 | mtspr SPRN_SPRG_SCRATCH0,r10; \ |
108 | mtspr SPRN_SPRG_SCRATCH1,r11; \ | |
14cf11af PM |
109 | mfcr r10; \ |
110 | EXCEPTION_PROLOG_1; \ | |
111 | EXCEPTION_PROLOG_2 | |
112 | ||
113 | #define EXCEPTION_PROLOG_1 \ | |
114 | mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \ | |
115 | andi. r11,r11,MSR_PR; \ | |
116 | tophys(r11,r1); /* use tophys(r1) if kernel */ \ | |
117 | beq 1f; \ | |
ee43eb78 | 118 | mfspr r11,SPRN_SPRG_THREAD; \ |
14cf11af PM |
119 | lwz r11,THREAD_INFO-THREAD(r11); \ |
120 | addi r11,r11,THREAD_SIZE; \ | |
121 | tophys(r11,r11); \ | |
122 | 1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */ | |
123 | ||
124 | ||
125 | #define EXCEPTION_PROLOG_2 \ | |
126 | CLR_TOP32(r11); \ | |
127 | stw r10,_CCR(r11); /* save registers */ \ | |
128 | stw r12,GPR12(r11); \ | |
129 | stw r9,GPR9(r11); \ | |
ee43eb78 | 130 | mfspr r10,SPRN_SPRG_SCRATCH0; \ |
14cf11af | 131 | stw r10,GPR10(r11); \ |
ee43eb78 | 132 | mfspr r12,SPRN_SPRG_SCRATCH1; \ |
14cf11af PM |
133 | stw r12,GPR11(r11); \ |
134 | mflr r10; \ | |
135 | stw r10,_LINK(r11); \ | |
136 | mfspr r12,SPRN_SRR0; \ | |
137 | mfspr r9,SPRN_SRR1; \ | |
138 | stw r1,GPR1(r11); \ | |
139 | stw r1,0(r11); \ | |
140 | tovirt(r1,r11); /* set new kernel sp */ \ | |
141 | li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \ | |
142 | MTMSRD(r10); /* (except for mach check in rtas) */ \ | |
143 | stw r0,GPR0(r11); \ | |
144 | SAVE_4GPRS(3, r11); \ | |
145 | SAVE_2GPRS(7, r11) | |
146 | ||
147 | /* | |
148 | * Note: code which follows this uses cr0.eq (set if from kernel), | |
149 | * r11, r12 (SRR0), and r9 (SRR1). | |
150 | * | |
151 | * Note2: once we have set r1 we are in a position to take exceptions | |
152 | * again, and we could thus set MSR:RI at that point. | |
153 | */ | |
154 | ||
155 | /* | |
156 | * Exception vectors. | |
157 | */ | |
158 | #define EXCEPTION(n, label, hdlr, xfer) \ | |
159 | . = n; \ | |
160 | label: \ | |
161 | EXCEPTION_PROLOG; \ | |
162 | addi r3,r1,STACK_FRAME_OVERHEAD; \ | |
163 | xfer(n, hdlr) | |
164 | ||
165 | #define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \ | |
166 | li r10,trap; \ | |
d73e0c99 | 167 | stw r10,_TRAP(r11); \ |
14cf11af PM |
168 | li r10,MSR_KERNEL; \ |
169 | copyee(r10, r9); \ | |
170 | bl tfer; \ | |
171 | i##n: \ | |
172 | .long hdlr; \ | |
173 | .long ret | |
174 | ||
175 | #define COPY_EE(d, s) rlwimi d,s,0,16,16 | |
176 | #define NOCOPY(d, s) | |
177 | ||
178 | #define EXC_XFER_STD(n, hdlr) \ | |
179 | EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \ | |
180 | ret_from_except_full) | |
181 | ||
182 | #define EXC_XFER_LITE(n, hdlr) \ | |
183 | EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \ | |
184 | ret_from_except) | |
185 | ||
186 | #define EXC_XFER_EE(n, hdlr) \ | |
187 | EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \ | |
188 | ret_from_except_full) | |
189 | ||
190 | #define EXC_XFER_EE_LITE(n, hdlr) \ | |
191 | EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \ | |
192 | ret_from_except) | |
193 | ||
194 | /* System reset */ | |
dc1c1ca3 | 195 | EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) |
14cf11af PM |
196 | |
197 | /* Machine check */ | |
198 | . = 0x200 | |
199 | MachineCheck: | |
200 | EXCEPTION_PROLOG | |
201 | mfspr r4,SPRN_DAR | |
202 | stw r4,_DAR(r11) | |
60e071fe JT |
203 | li r5,0x00f0 |
204 | mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ | |
14cf11af PM |
205 | mfspr r5,SPRN_DSISR |
206 | stw r5,_DSISR(r11) | |
207 | addi r3,r1,STACK_FRAME_OVERHEAD | |
dc1c1ca3 | 208 | EXC_XFER_STD(0x200, machine_check_exception) |
14cf11af PM |
209 | |
210 | /* Data access exception. | |
211 | * This is "never generated" by the MPC8xx. We jump to it for other | |
212 | * translation errors. | |
213 | */ | |
214 | . = 0x300 | |
215 | DataAccess: | |
216 | EXCEPTION_PROLOG | |
217 | mfspr r10,SPRN_DSISR | |
218 | stw r10,_DSISR(r11) | |
219 | mr r5,r10 | |
220 | mfspr r4,SPRN_DAR | |
60e071fe JT |
221 | li r10,0x00f0 |
222 | mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */ | |
a546498f | 223 | EXC_XFER_LITE(0x300, handle_page_fault) |
14cf11af PM |
224 | |
225 | /* Instruction access exception. | |
226 | * This is "never generated" by the MPC8xx. We jump to it for other | |
227 | * translation errors. | |
228 | */ | |
229 | . = 0x400 | |
230 | InstructionAccess: | |
231 | EXCEPTION_PROLOG | |
232 | mr r4,r12 | |
233 | mr r5,r9 | |
a546498f | 234 | EXC_XFER_LITE(0x400, handle_page_fault) |
14cf11af PM |
235 | |
236 | /* External interrupt */ | |
237 | EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) | |
238 | ||
239 | /* Alignment exception */ | |
240 | . = 0x600 | |
241 | Alignment: | |
242 | EXCEPTION_PROLOG | |
243 | mfspr r4,SPRN_DAR | |
244 | stw r4,_DAR(r11) | |
60e071fe JT |
245 | li r5,0x00f0 |
246 | mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ | |
14cf11af PM |
247 | mfspr r5,SPRN_DSISR |
248 | stw r5,_DSISR(r11) | |
249 | addi r3,r1,STACK_FRAME_OVERHEAD | |
dc1c1ca3 | 250 | EXC_XFER_EE(0x600, alignment_exception) |
14cf11af PM |
251 | |
252 | /* Program check exception */ | |
dc1c1ca3 | 253 | EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD) |
14cf11af PM |
254 | |
255 | /* No FPU on MPC8xx. This exception is not supposed to happen. | |
256 | */ | |
dc1c1ca3 | 257 | EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD) |
14cf11af PM |
258 | |
259 | /* Decrementer */ | |
260 | EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE) | |
261 | ||
dc1c1ca3 SR |
262 | EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE) |
263 | EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE) | |
14cf11af PM |
264 | |
265 | /* System call */ | |
266 | . = 0xc00 | |
267 | SystemCall: | |
268 | EXCEPTION_PROLOG | |
269 | EXC_XFER_EE_LITE(0xc00, DoSyscall) | |
270 | ||
271 | /* Single step - not used on 601 */ | |
dc1c1ca3 SR |
272 | EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD) |
273 | EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE) | |
274 | EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE) | |
14cf11af PM |
275 | |
276 | /* On the MPC8xx, this is a software emulation interrupt. It occurs | |
277 | * for all unimplemented and illegal instructions. | |
278 | */ | |
279 | EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD) | |
280 | ||
281 | . = 0x1100 | |
282 | /* | |
283 | * For the MPC8xx, this is a software tablewalk to load the instruction | |
284 | * TLB. It is modelled after the example in the Motorola manual. The task | |
285 | * switch loads the M_TWB register with the pointer to the first level table. | |
286 | * If we discover there is no second level table (value is zero) or if there | |
287 | * is an invalid pte, we load that into the TLB, which causes another fault | |
288 | * into the TLB Error interrupt where we can handle such problems. | |
289 | * We have to use the MD_xxx registers for the tablewalk because the | |
290 | * equivalent MI_xxx registers only perform the attribute functions. | |
291 | */ | |
292 | InstructionTLBMiss: | |
293 | #ifdef CONFIG_8xx_CPU6 | |
294 | stw r3, 8(r0) | |
295 | #endif | |
296 | DO_8xx_CPU6(0x3f80, r3) | |
297 | mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ | |
298 | mfcr r10 | |
469d62be | 299 | #ifdef CONFIG_8xx_CPU6 |
14cf11af PM |
300 | stw r10, 0(r0) |
301 | stw r11, 4(r0) | |
469d62be JT |
302 | #else |
303 | mtspr SPRN_DAR, r10 | |
304 | mtspr SPRN_SPRG2, r11 | |
305 | #endif | |
14cf11af | 306 | mfspr r10, SPRN_SRR0 /* Get effective address of fault */ |
74016852 SW |
307 | #ifdef CONFIG_8xx_CPU15 |
308 | addi r11, r10, 0x1000 | |
309 | tlbie r11 | |
310 | addi r11, r10, -0x1000 | |
311 | tlbie r11 | |
312 | #endif | |
14cf11af PM |
313 | DO_8xx_CPU6(0x3780, r3) |
314 | mtspr SPRN_MD_EPN, r10 /* Have to use MD_EPN for walk, MI_EPN can't */ | |
315 | mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ | |
316 | ||
317 | /* If we are faulting a kernel address, we have to use the | |
318 | * kernel page tables. | |
319 | */ | |
4afb0be7 JT |
320 | #ifdef CONFIG_MODULES |
321 | /* Only modules will cause ITLB Misses as we always | |
322 | * pin the first 8MB of kernel memory */ | |
14cf11af PM |
323 | andi. r11, r10, 0x0800 /* Address >= 0x80000000 */ |
324 | beq 3f | |
325 | lis r11, swapper_pg_dir@h | |
326 | ori r11, r11, swapper_pg_dir@l | |
327 | rlwimi r10, r11, 0, 2, 19 | |
328 | 3: | |
4afb0be7 | 329 | #endif |
14cf11af PM |
330 | lwz r11, 0(r10) /* Get the level 1 entry */ |
331 | rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ | |
332 | beq 2f /* If zero, don't try to find a pte */ | |
333 | ||
334 | /* We have a pte table, so load the MI_TWC with the attributes | |
335 | * for this "segment." | |
336 | */ | |
337 | ori r11,r11,1 /* Set valid bit */ | |
338 | DO_8xx_CPU6(0x2b80, r3) | |
339 | mtspr SPRN_MI_TWC, r11 /* Set segment attributes */ | |
340 | DO_8xx_CPU6(0x3b80, r3) | |
341 | mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ | |
342 | mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ | |
343 | lwz r10, 0(r11) /* Get the pte */ | |
344 | ||
d069cb43 | 345 | #ifdef CONFIG_SWAP |
fe11dc3f JT |
346 | andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT |
347 | cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT | |
348 | bne- cr0, 2f | |
d069cb43 | 349 | #endif |
14cf11af | 350 | /* The Linux PTE won't go exactly into the MMU TLB. |
fe1691e3 | 351 | * Software indicator bits 21 and 28 must be clear. |
14cf11af PM |
352 | * Software indicator bits 24, 25, 26, and 27 must be |
353 | * set. All other Linux PTE bits control the behavior | |
354 | * of the MMU. | |
355 | */ | |
fe11dc3f | 356 | li r11, 0x00f0 |
fe1691e3 | 357 | rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */ |
14cf11af PM |
358 | DO_8xx_CPU6(0x2d80, r3) |
359 | mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ | |
360 | ||
469d62be JT |
361 | /* Restore registers */ |
362 | #ifndef CONFIG_8xx_CPU6 | |
363 | mfspr r10, SPRN_DAR | |
364 | mtcr r10 | |
365 | mtspr SPRN_DAR, r11 /* Tag DAR */ | |
366 | mfspr r11, SPRN_SPRG2 | |
367 | #else | |
14cf11af PM |
368 | lwz r11, 0(r0) |
369 | mtcr r11 | |
370 | lwz r11, 4(r0) | |
14cf11af PM |
371 | lwz r3, 8(r0) |
372 | #endif | |
469d62be | 373 | mfspr r10, SPRN_M_TW |
14cf11af | 374 | rfi |
fe11dc3f JT |
375 | 2: |
376 | mfspr r11, SPRN_SRR1 | |
377 | /* clear all error bits as TLB Miss | |
378 | * sets a few unconditionally | |
379 | */ | |
380 | rlwinm r11, r11, 0, 0xffff | |
381 | mtspr SPRN_SRR1, r11 | |
382 | ||
469d62be JT |
383 | /* Restore registers */ |
384 | #ifndef CONFIG_8xx_CPU6 | |
385 | mfspr r10, SPRN_DAR | |
386 | mtcr r10 | |
387 | li r11, 0x00f0 | |
388 | mtspr SPRN_DAR, r11 /* Tag DAR */ | |
389 | mfspr r11, SPRN_SPRG2 | |
390 | #else | |
fe11dc3f JT |
391 | lwz r11, 0(r0) |
392 | mtcr r11 | |
393 | lwz r11, 4(r0) | |
fe11dc3f JT |
394 | lwz r3, 8(r0) |
395 | #endif | |
469d62be | 396 | mfspr r10, SPRN_M_TW |
fe11dc3f | 397 | b InstructionAccess |
14cf11af PM |
398 | |
399 | . = 0x1200 | |
400 | DataStoreTLBMiss: | |
401 | #ifdef CONFIG_8xx_CPU6 | |
402 | stw r3, 8(r0) | |
403 | #endif | |
404 | DO_8xx_CPU6(0x3f80, r3) | |
405 | mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ | |
406 | mfcr r10 | |
469d62be | 407 | #ifdef CONFIG_8xx_CPU6 |
14cf11af PM |
408 | stw r10, 0(r0) |
409 | stw r11, 4(r0) | |
469d62be JT |
410 | #else |
411 | mtspr SPRN_DAR, r10 | |
412 | mtspr SPRN_SPRG2, r11 | |
413 | #endif | |
14cf11af PM |
414 | mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ |
415 | ||
416 | /* If we are faulting a kernel address, we have to use the | |
417 | * kernel page tables. | |
418 | */ | |
419 | andi. r11, r10, 0x0800 | |
420 | beq 3f | |
421 | lis r11, swapper_pg_dir@h | |
422 | ori r11, r11, swapper_pg_dir@l | |
423 | rlwimi r10, r11, 0, 2, 19 | |
424 | 3: | |
425 | lwz r11, 0(r10) /* Get the level 1 entry */ | |
426 | rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ | |
427 | beq 2f /* If zero, don't try to find a pte */ | |
428 | ||
429 | /* We have a pte table, so load fetch the pte from the table. | |
430 | */ | |
431 | ori r11, r11, 1 /* Set valid bit in physical L2 page */ | |
432 | DO_8xx_CPU6(0x3b80, r3) | |
433 | mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ | |
434 | mfspr r10, SPRN_MD_TWC /* ....and get the pte address */ | |
435 | lwz r10, 0(r10) /* Get the pte */ | |
436 | ||
437 | /* Insert the Guarded flag into the TWC from the Linux PTE. | |
438 | * It is bit 27 of both the Linux PTE and the TWC (at least | |
439 | * I got that right :-). It will be better when we can put | |
440 | * this into the Linux pgd/pmd and load it in the operation | |
441 | * above. | |
442 | */ | |
443 | rlwimi r11, r10, 0, 27, 27 | |
0c466169 JT |
444 | /* Insert the WriteThru flag into the TWC from the Linux PTE. |
445 | * It is bit 25 in the Linux PTE and bit 30 in the TWC | |
446 | */ | |
447 | rlwimi r11, r10, 32-5, 30, 30 | |
14cf11af PM |
448 | DO_8xx_CPU6(0x3b80, r3) |
449 | mtspr SPRN_MD_TWC, r11 | |
450 | ||
fe11dc3f JT |
451 | /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set. |
452 | * We also need to know if the insn is a load/store, so: | |
453 | * Clear _PAGE_PRESENT and load that which will | |
454 | * trap into DTLB Error with store bit set accordinly. | |
455 | */ | |
456 | /* PRESENT=0x1, ACCESSED=0x20 | |
457 | * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5)); | |
458 | * r10 = (r10 & ~PRESENT) | r11; | |
459 | */ | |
d069cb43 | 460 | #ifdef CONFIG_SWAP |
990d89c6 | 461 | rlwinm r11, r10, 32-5, _PAGE_PRESENT |
fe11dc3f | 462 | and r11, r11, r10 |
990d89c6 | 463 | rlwimi r10, r11, 0, _PAGE_PRESENT |
d069cb43 | 464 | #endif |
fe11dc3f | 465 | /* Honour kernel RO, User NA */ |
990d89c6 | 466 | /* 0x200 == Extended encoding, bit 22 */ |
fe1691e3 | 467 | rlwimi r10, r10, 32-2, 0x200 /* Copy USER to bit 22, 0x200 */ |
990d89c6 JT |
468 | /* r11 = (r10 & _PAGE_RW) >> 1 */ |
469 | rlwinm r11, r10, 32-1, 0x200 | |
470 | or r10, r11, r10 | |
471 | /* invert RW and 0x200 bits */ | |
472 | xori r10, r10, _PAGE_RW | 0x200 | |
14cf11af PM |
473 | |
474 | /* The Linux PTE won't go exactly into the MMU TLB. | |
fe11dc3f | 475 | * Software indicator bits 22 and 28 must be clear. |
14cf11af PM |
476 | * Software indicator bits 24, 25, 26, and 27 must be |
477 | * set. All other Linux PTE bits control the behavior | |
478 | * of the MMU. | |
479 | */ | |
480 | 2: li r11, 0x00f0 | |
481 | rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ | |
482 | DO_8xx_CPU6(0x3d80, r3) | |
483 | mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ | |
484 | ||
469d62be JT |
485 | /* Restore registers */ |
486 | #ifndef CONFIG_8xx_CPU6 | |
487 | mfspr r10, SPRN_DAR | |
488 | mtcr r10 | |
489 | mtspr SPRN_DAR, r11 /* Tag DAR */ | |
490 | mfspr r11, SPRN_SPRG2 | |
491 | #else | |
492 | mtspr SPRN_DAR, r11 /* Tag DAR */ | |
14cf11af PM |
493 | lwz r11, 0(r0) |
494 | mtcr r11 | |
495 | lwz r11, 4(r0) | |
14cf11af PM |
496 | lwz r3, 8(r0) |
497 | #endif | |
469d62be | 498 | mfspr r10, SPRN_M_TW |
14cf11af PM |
499 | rfi |
500 | ||
501 | /* This is an instruction TLB error on the MPC8xx. This could be due | |
502 | * to many reasons, such as executing guarded memory or illegal instruction | |
503 | * addresses. There is nothing to do but handle a big time error fault. | |
504 | */ | |
505 | . = 0x1300 | |
506 | InstructionTLBError: | |
507 | b InstructionAccess | |
508 | ||
509 | /* This is the data TLB error on the MPC8xx. This could be due to | |
510 | * many reasons, including a dirty update to a pte. We can catch that | |
511 | * one here, but anything else is an error. First, we track down the | |
512 | * Linux pte. If it is valid, write access is allowed, but the | |
513 | * page dirty bit is not set, we will set it and reload the TLB. For | |
514 | * any other case, we bail out to a higher level function that can | |
515 | * handle it. | |
516 | */ | |
517 | . = 0x1400 | |
518 | DataTLBError: | |
519 | #ifdef CONFIG_8xx_CPU6 | |
520 | stw r3, 8(r0) | |
521 | #endif | |
522 | DO_8xx_CPU6(0x3f80, r3) | |
523 | mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ | |
524 | mfcr r10 | |
525 | stw r10, 0(r0) | |
526 | stw r11, 4(r0) | |
527 | ||
60e071fe JT |
528 | mfspr r10, SPRN_DAR |
529 | cmpwi cr0, r10, 0x00f0 | |
0a2ab51f JT |
530 | beq- FixupDAR /* must be a buggy dcbX, icbi insn. */ |
531 | DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */ | |
14cf11af PM |
532 | mfspr r10, SPRN_M_TW /* Restore registers */ |
533 | lwz r11, 0(r0) | |
534 | mtcr r11 | |
535 | lwz r11, 4(r0) | |
536 | #ifdef CONFIG_8xx_CPU6 | |
537 | lwz r3, 8(r0) | |
538 | #endif | |
539 | b DataAccess | |
540 | ||
dc1c1ca3 SR |
541 | EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) |
542 | EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) | |
543 | EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE) | |
544 | EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) | |
545 | EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) | |
546 | EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE) | |
547 | EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE) | |
14cf11af PM |
548 | |
549 | /* On the MPC8xx, these next four traps are used for development | |
550 | * support of breakpoints and such. Someday I will get around to | |
551 | * using them. | |
552 | */ | |
dc1c1ca3 SR |
553 | EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE) |
554 | EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE) | |
555 | EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE) | |
556 | EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE) | |
14cf11af PM |
557 | |
558 | . = 0x2000 | |
559 | ||
0a2ab51f JT |
560 | /* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions |
561 | * by decoding the registers used by the dcbx instruction and adding them. | |
562 | * DAR is set to the calculated address and r10 also holds the EA on exit. | |
563 | */ | |
564 | /* define if you don't want to use self modifying code */ | |
565 | #define NO_SELF_MODIFYING_CODE | |
566 | FixupDAR:/* Entry point for dcbx workaround. */ | |
567 | /* fetch instruction from memory. */ | |
568 | mfspr r10, SPRN_SRR0 | |
061ec959 | 569 | andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ |
0a2ab51f JT |
570 | DO_8xx_CPU6(0x3780, r3) |
571 | mtspr SPRN_MD_EPN, r10 | |
572 | mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */ | |
061ec959 | 573 | beq- 3f /* Branch if user space */ |
0a2ab51f JT |
574 | lis r11, (swapper_pg_dir-PAGE_OFFSET)@h |
575 | ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l | |
576 | rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */ | |
577 | 3: lwz r11, 0(r11) /* Get the level 1 entry */ | |
578 | DO_8xx_CPU6(0x3b80, r3) | |
579 | mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ | |
580 | mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ | |
581 | lwz r11, 0(r11) /* Get the pte */ | |
582 | /* concat physical page address(r11) and page offset(r10) */ | |
583 | rlwimi r11, r10, 0, 20, 31 | |
584 | lwz r11,0(r11) | |
585 | /* Check if it really is a dcbx instruction. */ | |
586 | /* dcbt and dcbtst does not generate DTLB Misses/Errors, | |
587 | * no need to include them here */ | |
588 | srwi r10, r11, 26 /* check if major OP code is 31 */ | |
589 | cmpwi cr0, r10, 31 | |
590 | bne- 141f | |
591 | rlwinm r10, r11, 0, 21, 30 | |
592 | cmpwi cr0, r10, 2028 /* Is dcbz? */ | |
593 | beq+ 142f | |
594 | cmpwi cr0, r10, 940 /* Is dcbi? */ | |
595 | beq+ 142f | |
596 | cmpwi cr0, r10, 108 /* Is dcbst? */ | |
597 | beq+ 144f /* Fix up store bit! */ | |
598 | cmpwi cr0, r10, 172 /* Is dcbf? */ | |
599 | beq+ 142f | |
600 | cmpwi cr0, r10, 1964 /* Is icbi? */ | |
601 | beq+ 142f | |
602 | 141: mfspr r10, SPRN_DAR /* r10 must hold DAR at exit */ | |
603 | b DARFixed /* Nope, go back to normal TLB processing */ | |
604 | ||
605 | 144: mfspr r10, SPRN_DSISR | |
606 | rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */ | |
607 | mtspr SPRN_DSISR, r10 | |
608 | 142: /* continue, it was a dcbx, dcbi instruction. */ | |
609 | #ifdef CONFIG_8xx_CPU6 | |
610 | lwz r3, 8(r0) /* restore r3 from memory */ | |
611 | #endif | |
612 | #ifndef NO_SELF_MODIFYING_CODE | |
613 | andis. r10,r11,0x1f /* test if reg RA is r0 */ | |
614 | li r10,modified_instr@l | |
615 | dcbtst r0,r10 /* touch for store */ | |
616 | rlwinm r11,r11,0,0,20 /* Zero lower 10 bits */ | |
617 | oris r11,r11,640 /* Transform instr. to a "add r10,RA,RB" */ | |
618 | ori r11,r11,532 | |
619 | stw r11,0(r10) /* store add/and instruction */ | |
620 | dcbf 0,r10 /* flush new instr. to memory. */ | |
621 | icbi 0,r10 /* invalidate instr. cache line */ | |
622 | lwz r11, 4(r0) /* restore r11 from memory */ | |
623 | mfspr r10, SPRN_M_TW /* restore r10 from M_TW */ | |
624 | isync /* Wait until new instr is loaded from memory */ | |
625 | modified_instr: | |
626 | .space 4 /* this is where the add instr. is stored */ | |
627 | bne+ 143f | |
628 | subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */ | |
629 | 143: mtdar r10 /* store faulting EA in DAR */ | |
630 | b DARFixed /* Go back to normal TLB handling */ | |
631 | #else | |
632 | mfctr r10 | |
633 | mtdar r10 /* save ctr reg in DAR */ | |
634 | rlwinm r10, r11, 24, 24, 28 /* offset into jump table for reg RB */ | |
635 | addi r10, r10, 150f@l /* add start of table */ | |
636 | mtctr r10 /* load ctr with jump address */ | |
637 | xor r10, r10, r10 /* sum starts at zero */ | |
638 | bctr /* jump into table */ | |
639 | 150: | |
640 | add r10, r10, r0 ;b 151f | |
641 | add r10, r10, r1 ;b 151f | |
642 | add r10, r10, r2 ;b 151f | |
643 | add r10, r10, r3 ;b 151f | |
644 | add r10, r10, r4 ;b 151f | |
645 | add r10, r10, r5 ;b 151f | |
646 | add r10, r10, r6 ;b 151f | |
647 | add r10, r10, r7 ;b 151f | |
648 | add r10, r10, r8 ;b 151f | |
649 | add r10, r10, r9 ;b 151f | |
650 | mtctr r11 ;b 154f /* r10 needs special handling */ | |
651 | mtctr r11 ;b 153f /* r11 needs special handling */ | |
652 | add r10, r10, r12 ;b 151f | |
653 | add r10, r10, r13 ;b 151f | |
654 | add r10, r10, r14 ;b 151f | |
655 | add r10, r10, r15 ;b 151f | |
656 | add r10, r10, r16 ;b 151f | |
657 | add r10, r10, r17 ;b 151f | |
658 | add r10, r10, r18 ;b 151f | |
659 | add r10, r10, r19 ;b 151f | |
660 | add r10, r10, r20 ;b 151f | |
661 | add r10, r10, r21 ;b 151f | |
662 | add r10, r10, r22 ;b 151f | |
663 | add r10, r10, r23 ;b 151f | |
664 | add r10, r10, r24 ;b 151f | |
665 | add r10, r10, r25 ;b 151f | |
666 | add r10, r10, r26 ;b 151f | |
667 | add r10, r10, r27 ;b 151f | |
668 | add r10, r10, r28 ;b 151f | |
669 | add r10, r10, r29 ;b 151f | |
670 | add r10, r10, r30 ;b 151f | |
671 | add r10, r10, r31 | |
672 | 151: | |
673 | rlwinm. r11,r11,19,24,28 /* offset into jump table for reg RA */ | |
674 | beq 152f /* if reg RA is zero, don't add it */ | |
675 | addi r11, r11, 150b@l /* add start of table */ | |
676 | mtctr r11 /* load ctr with jump address */ | |
677 | rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */ | |
678 | bctr /* jump into table */ | |
679 | 152: | |
680 | mfdar r11 | |
681 | mtctr r11 /* restore ctr reg from DAR */ | |
682 | mtdar r10 /* save fault EA to DAR */ | |
683 | b DARFixed /* Go back to normal TLB handling */ | |
684 | ||
685 | /* special handling for r10,r11 since these are modified already */ | |
686 | 153: lwz r11, 4(r0) /* load r11 from memory */ | |
687 | b 155f | |
688 | 154: mfspr r11, SPRN_M_TW /* load r10 from M_TW */ | |
689 | 155: add r10, r10, r11 /* add it */ | |
690 | mfctr r11 /* restore r11 */ | |
691 | b 151b | |
692 | #endif | |
693 | ||
14cf11af PM |
694 | .globl giveup_fpu |
695 | giveup_fpu: | |
696 | blr | |
697 | ||
698 | /* | |
699 | * This is where the main kernel code starts. | |
700 | */ | |
701 | start_here: | |
702 | /* ptr to current */ | |
703 | lis r2,init_task@h | |
704 | ori r2,r2,init_task@l | |
705 | ||
706 | /* ptr to phys current thread */ | |
707 | tophys(r4,r2) | |
708 | addi r4,r4,THREAD /* init task's THREAD */ | |
ee43eb78 | 709 | mtspr SPRN_SPRG_THREAD,r4 |
14cf11af PM |
710 | |
711 | /* stack */ | |
712 | lis r1,init_thread_union@ha | |
713 | addi r1,r1,init_thread_union@l | |
714 | li r0,0 | |
715 | stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) | |
716 | ||
717 | bl early_init /* We have to do this with MMU on */ | |
718 | ||
719 | /* | |
720 | * Decide what sort of machine this is and initialize the MMU. | |
721 | */ | |
6dece0eb SW |
722 | li r3,0 |
723 | mr r4,r31 | |
14cf11af PM |
724 | bl machine_init |
725 | bl MMU_init | |
726 | ||
727 | /* | |
728 | * Go back to running unmapped so we can load up new values | |
729 | * and change to using our exception vectors. | |
730 | * On the 8xx, all we have to do is invalidate the TLB to clear | |
731 | * the old 8M byte TLB mappings and load the page table base register. | |
732 | */ | |
733 | /* The right way to do this would be to track it down through | |
734 | * init's THREAD like the context switch code does, but this is | |
735 | * easier......until someone changes init's static structures. | |
736 | */ | |
737 | lis r6, swapper_pg_dir@h | |
738 | ori r6, r6, swapper_pg_dir@l | |
739 | tophys(r6,r6) | |
740 | #ifdef CONFIG_8xx_CPU6 | |
741 | lis r4, cpu6_errata_word@h | |
742 | ori r4, r4, cpu6_errata_word@l | |
743 | li r3, 0x3980 | |
744 | stw r3, 12(r4) | |
745 | lwz r3, 12(r4) | |
746 | #endif | |
747 | mtspr SPRN_M_TWB, r6 | |
748 | lis r4,2f@h | |
749 | ori r4,r4,2f@l | |
750 | tophys(r4,r4) | |
751 | li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR) | |
752 | mtspr SPRN_SRR0,r4 | |
753 | mtspr SPRN_SRR1,r3 | |
754 | rfi | |
755 | /* Load up the kernel context */ | |
756 | 2: | |
757 | SYNC /* Force all PTE updates to finish */ | |
758 | tlbia /* Clear all TLB entries */ | |
759 | sync /* wait for tlbia/tlbie to finish */ | |
760 | TLBSYNC /* ... on all CPUs */ | |
761 | ||
762 | /* set up the PTE pointers for the Abatron bdiGDB. | |
763 | */ | |
764 | tovirt(r6,r6) | |
765 | lis r5, abatron_pteptrs@h | |
766 | ori r5, r5, abatron_pteptrs@l | |
767 | stw r5, 0xf0(r0) /* Must match your Abatron config file */ | |
768 | tophys(r5,r5) | |
769 | stw r6, 0(r5) | |
770 | ||
771 | /* Now turn on the MMU for real! */ | |
772 | li r4,MSR_KERNEL | |
773 | lis r3,start_kernel@h | |
774 | ori r3,r3,start_kernel@l | |
775 | mtspr SPRN_SRR0,r3 | |
776 | mtspr SPRN_SRR1,r4 | |
777 | rfi /* enable MMU and jump to start_kernel */ | |
778 | ||
779 | /* Set up the initial MMU state so we can do the first level of | |
780 | * kernel initialization. This maps the first 8 MBytes of memory 1:1 | |
781 | * virtual to physical. Also, set the cache mode since that is defined | |
782 | * by TLB entries and perform any additional mapping (like of the IMMR). | |
783 | * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel, | |
784 | * 24 Mbytes of data, and the 8M IMMR space. Anything not covered by | |
785 | * these mappings is mapped by page tables. | |
786 | */ | |
787 | initial_mmu: | |
788 | tlbia /* Invalidate all TLB entries */ | |
9f4f04ba JT |
789 | /* Always pin the first 8 MB ITLB to prevent ITLB |
790 | misses while mucking around with SRR0/SRR1 in asm | |
791 | */ | |
14cf11af PM |
792 | lis r8, MI_RSV4I@h |
793 | ori r8, r8, 0x1c00 | |
9f4f04ba | 794 | |
14cf11af PM |
795 | mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */ |
796 | ||
797 | #ifdef CONFIG_PIN_TLB | |
798 | lis r10, (MD_RSV4I | MD_RESETVAL)@h | |
799 | ori r10, r10, 0x1c00 | |
800 | mr r8, r10 | |
801 | #else | |
802 | lis r10, MD_RESETVAL@h | |
803 | #endif | |
804 | #ifndef CONFIG_8xx_COPYBACK | |
805 | oris r10, r10, MD_WTDEF@h | |
806 | #endif | |
807 | mtspr SPRN_MD_CTR, r10 /* Set data TLB control */ | |
808 | ||
809 | /* Now map the lower 8 Meg into the TLBs. For this quick hack, | |
810 | * we can load the instruction and data TLB registers with the | |
811 | * same values. | |
812 | */ | |
813 | lis r8, KERNELBASE@h /* Create vaddr for TLB */ | |
814 | ori r8, r8, MI_EVALID /* Mark it valid */ | |
815 | mtspr SPRN_MI_EPN, r8 | |
816 | mtspr SPRN_MD_EPN, r8 | |
817 | li r8, MI_PS8MEG /* Set 8M byte page */ | |
818 | ori r8, r8, MI_SVALID /* Make it valid */ | |
819 | mtspr SPRN_MI_TWC, r8 | |
820 | mtspr SPRN_MD_TWC, r8 | |
821 | li r8, MI_BOOTINIT /* Create RPN for address 0 */ | |
822 | mtspr SPRN_MI_RPN, r8 /* Store TLB entry */ | |
823 | mtspr SPRN_MD_RPN, r8 | |
824 | lis r8, MI_Kp@h /* Set the protection mode */ | |
825 | mtspr SPRN_MI_AP, r8 | |
826 | mtspr SPRN_MD_AP, r8 | |
827 | ||
828 | /* Map another 8 MByte at the IMMR to get the processor | |
829 | * internal registers (among other things). | |
830 | */ | |
831 | #ifdef CONFIG_PIN_TLB | |
832 | addi r10, r10, 0x0100 | |
833 | mtspr SPRN_MD_CTR, r10 | |
834 | #endif | |
835 | mfspr r9, 638 /* Get current IMMR */ | |
836 | andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */ | |
837 | ||
838 | mr r8, r9 /* Create vaddr for TLB */ | |
839 | ori r8, r8, MD_EVALID /* Mark it valid */ | |
840 | mtspr SPRN_MD_EPN, r8 | |
841 | li r8, MD_PS8MEG /* Set 8M byte page */ | |
842 | ori r8, r8, MD_SVALID /* Make it valid */ | |
843 | mtspr SPRN_MD_TWC, r8 | |
844 | mr r8, r9 /* Create paddr for TLB */ | |
845 | ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */ | |
846 | mtspr SPRN_MD_RPN, r8 | |
847 | ||
848 | #ifdef CONFIG_PIN_TLB | |
849 | /* Map two more 8M kernel data pages. | |
850 | */ | |
851 | addi r10, r10, 0x0100 | |
852 | mtspr SPRN_MD_CTR, r10 | |
853 | ||
854 | lis r8, KERNELBASE@h /* Create vaddr for TLB */ | |
855 | addis r8, r8, 0x0080 /* Add 8M */ | |
856 | ori r8, r8, MI_EVALID /* Mark it valid */ | |
857 | mtspr SPRN_MD_EPN, r8 | |
858 | li r9, MI_PS8MEG /* Set 8M byte page */ | |
859 | ori r9, r9, MI_SVALID /* Make it valid */ | |
860 | mtspr SPRN_MD_TWC, r9 | |
861 | li r11, MI_BOOTINIT /* Create RPN for address 0 */ | |
862 | addis r11, r11, 0x0080 /* Add 8M */ | |
ccf0d68e | 863 | mtspr SPRN_MD_RPN, r11 |
14cf11af PM |
864 | |
865 | addis r8, r8, 0x0080 /* Add 8M */ | |
866 | mtspr SPRN_MD_EPN, r8 | |
867 | mtspr SPRN_MD_TWC, r9 | |
868 | addis r11, r11, 0x0080 /* Add 8M */ | |
ccf0d68e | 869 | mtspr SPRN_MD_RPN, r11 |
14cf11af PM |
870 | #endif |
871 | ||
872 | /* Since the cache is enabled according to the information we | |
873 | * just loaded into the TLB, invalidate and enable the caches here. | |
874 | * We should probably check/set other modes....later. | |
875 | */ | |
876 | lis r8, IDC_INVALL@h | |
877 | mtspr SPRN_IC_CST, r8 | |
878 | mtspr SPRN_DC_CST, r8 | |
879 | lis r8, IDC_ENABLE@h | |
880 | mtspr SPRN_IC_CST, r8 | |
881 | #ifdef CONFIG_8xx_COPYBACK | |
882 | mtspr SPRN_DC_CST, r8 | |
883 | #else | |
884 | /* For a debug option, I left this here to easily enable | |
885 | * the write through cache mode | |
886 | */ | |
887 | lis r8, DC_SFWT@h | |
888 | mtspr SPRN_DC_CST, r8 | |
889 | lis r8, IDC_ENABLE@h | |
890 | mtspr SPRN_DC_CST, r8 | |
891 | #endif | |
892 | blr | |
893 | ||
894 | ||
895 | /* | |
896 | * Set up to use a given MMU context. | |
897 | * r3 is context number, r4 is PGD pointer. | |
898 | * | |
899 | * We place the physical address of the new task page directory loaded | |
900 | * into the MMU base register, and set the ASID compare register with | |
901 | * the new "context." | |
902 | */ | |
903 | _GLOBAL(set_context) | |
904 | ||
905 | #ifdef CONFIG_BDI_SWITCH | |
906 | /* Context switch the PTE pointer for the Abatron BDI2000. | |
907 | * The PGDIR is passed as second argument. | |
908 | */ | |
909 | lis r5, KERNELBASE@h | |
910 | lwz r5, 0xf0(r5) | |
911 | stw r4, 0x4(r5) | |
912 | #endif | |
913 | ||
914 | #ifdef CONFIG_8xx_CPU6 | |
915 | lis r6, cpu6_errata_word@h | |
916 | ori r6, r6, cpu6_errata_word@l | |
917 | tophys (r4, r4) | |
918 | li r7, 0x3980 | |
919 | stw r7, 12(r6) | |
920 | lwz r7, 12(r6) | |
921 | mtspr SPRN_M_TWB, r4 /* Update MMU base address */ | |
922 | li r7, 0x3380 | |
923 | stw r7, 12(r6) | |
924 | lwz r7, 12(r6) | |
925 | mtspr SPRN_M_CASID, r3 /* Update context */ | |
926 | #else | |
927 | mtspr SPRN_M_CASID,r3 /* Update context */ | |
928 | tophys (r4, r4) | |
929 | mtspr SPRN_M_TWB, r4 /* and pgd */ | |
930 | #endif | |
931 | SYNC | |
932 | blr | |
933 | ||
934 | #ifdef CONFIG_8xx_CPU6 | |
935 | /* It's here because it is unique to the 8xx. | |
936 | * It is important we get called with interrupts disabled. I used to | |
937 | * do that, but it appears that all code that calls this already had | |
938 | * interrupt disabled. | |
939 | */ | |
940 | .globl set_dec_cpu6 | |
941 | set_dec_cpu6: | |
942 | lis r7, cpu6_errata_word@h | |
943 | ori r7, r7, cpu6_errata_word@l | |
944 | li r4, 0x2c00 | |
945 | stw r4, 8(r7) | |
946 | lwz r4, 8(r7) | |
947 | mtspr 22, r3 /* Update Decrementer */ | |
948 | SYNC | |
949 | blr | |
950 | #endif | |
951 | ||
952 | /* | |
953 | * We put a few things here that have to be page-aligned. | |
954 | * This stuff goes at the beginning of the data segment, | |
955 | * which is page-aligned. | |
956 | */ | |
957 | .data | |
958 | .globl sdata | |
959 | sdata: | |
960 | .globl empty_zero_page | |
961 | empty_zero_page: | |
962 | .space 4096 | |
963 | ||
964 | .globl swapper_pg_dir | |
965 | swapper_pg_dir: | |
966 | .space 4096 | |
967 | ||
14cf11af PM |
968 | /* Room for two PTE table poiners, usually the kernel and current user |
969 | * pointer to their respective root page table (pgdir). | |
970 | */ | |
971 | abatron_pteptrs: | |
972 | .space 8 | |
973 | ||
974 | #ifdef CONFIG_8xx_CPU6 | |
975 | .globl cpu6_errata_word | |
976 | cpu6_errata_word: | |
977 | .space 16 | |
978 | #endif | |
979 |