projects / mirror_ubuntu-zesty-kernel.git / blame
| Commit | Line | Data |
|---|---|---|
| 9e9f6010 CS |
1 | |
| 2 | #include "req-gen/_begin.h" | |
| 3 | ||
| 4 | /* | |
| 5 | * Based on the document "getPerfCountInfo v1.07" | |
| 6 | */ | |
| 7 | ||
| 8 | /* | |
| 9 | * #define REQUEST_NAME counter_request_name | |
| 10 | * #define REQUEST_NUM r_num | |
| 11 | * #define REQUEST_IDX_KIND starting_index_kind | |
| 12 | * #include I(REQUEST_BEGIN) | |
| 13 | * REQUEST( | |
| 14 | * __field(...) | |
| 15 | * __field(...) | |
| 16 | * __array(...) | |
| 17 | * __count(...) | |
| 18 | * ) | |
| 19 | * #include I(REQUEST_END) | |
| 20 | * | |
| 21 | * - starting_index_kind is one of the following, depending on the event: | |
| 22 | * | |
| 97bf2640 CS |
23 | * hw_chip_id: hardware chip id or -1 for current hw chip |
| 24 | * partition_id | |
| 25 | * sibling_part_id, | |
| 9e9f6010 CS |
26 | * phys_processor_idx: |
| 27 | * 0xffffffffffffffff: or -1, which means it is irrelavant for the event | |
| 28 | * | |
| 29 | * __count(offset, bytes, name): | |
| 30 | * a counter that should be exposed via perf | |
| 31 | * __field(offset, bytes, name) | |
| 32 | * a normal field | |
| 33 | * __array(offset, bytes, name) | |
| 34 | * an array of bytes | |
| 35 | * | |
| 36 | * | |
| 37 | * @bytes for __count, and __field _must_ be a numeral token | |
| 38 | * in decimal, not an expression and not in hex. | |
| 39 | * | |
| 40 | * | |
| 41 | * TODO: | |
| 42 | * - expose secondary index (if any counter ever uses it, only 0xA0 | |
| 43 | * appears to use it right now, and it doesn't have any counters) | |
| 44 | * - embed versioning info | |
| 45 | * - include counter descriptions | |
| 46 | */ | |
| 47 | #define REQUEST_NAME dispatch_timebase_by_processor | |
| 48 | #define REQUEST_NUM 0x10 | |
| 49 | #define REQUEST_IDX_KIND "phys_processor_idx=?" | |
| 50 | #include I(REQUEST_BEGIN) | |
| 51 | REQUEST(__count(0, 8, processor_time_in_timebase_cycles) | |
| 52 | __field(0x8, 4, hw_processor_id) | |
| 53 | __field(0xC, 2, owning_part_id) | |
| 54 | __field(0xE, 1, processor_state) | |
| 55 | __field(0xF, 1, version) | |
| 56 | __field(0x10, 4, hw_chip_id) | |
| 57 | __field(0x14, 4, phys_module_id) | |
| 58 | __field(0x18, 4, primary_affinity_domain_idx) | |
| 59 | __field(0x1C, 4, secondary_affinity_domain_idx) | |
| 60 | __field(0x20, 4, processor_version) | |
| 61 | __field(0x24, 2, logical_processor_idx) | |
| 62 | __field(0x26, 2, reserved) | |
| 63 | __field(0x28, 4, processor_id_register) | |
| 64 | __field(0x2C, 4, phys_processor_idx) | |
| 65 | ) | |
| 66 | #include I(REQUEST_END) | |
| 67 | ||
| 97bf2640 CS |
68 | #define REQUEST_NAME entitled_capped_uncapped_donated_idle_timebase_by_partition |
| 69 | #define REQUEST_NUM 0x20 | |
| 70 | #define REQUEST_IDX_KIND "sibling_part_id=?" | |
| 71 | #include I(REQUEST_BEGIN) | |
| 72 | REQUEST(__field(0, 8, partition_id) | |
| 73 | __count(0x8, 8, entitled_cycles) | |
| 74 | __count(0x10, 8, consumed_capped_cycles) | |
| 75 | __count(0x18, 8, consumed_uncapped_cycles) | |
| 76 | __count(0x20, 8, cycles_donated) | |
| 77 | __count(0x28, 8, purr_idle_cycles) | |
| 78 | ) | |
| 79 | #include I(REQUEST_END) | |
| 80 | ||
| 81 | /* | |
| 82 | * Not available for counter_info_version >= 0x8, use | |
| 83 | * run_instruction_cycles_by_partition(0x100) instead. | |
| 84 | */ | |
| 85 | #define REQUEST_NAME run_instructions_run_cycles_by_partition | |
| 86 | #define REQUEST_NUM 0x30 | |
| 87 | #define REQUEST_IDX_KIND "sibling_part_id=?" | |
| 88 | #include I(REQUEST_BEGIN) | |
| 89 | REQUEST(__field(0, 8, partition_id) | |
| 90 | __count(0x8, 8, instructions_completed) | |
| 91 | __count(0x10, 8, cycles) | |
| 92 | ) | |
| 93 | #include I(REQUEST_END) | |
| 94 | ||
| 9e9f6010 CS |
95 | #define REQUEST_NAME system_performance_capabilities |
| 96 | #define REQUEST_NUM 0x40 | |
| 97 | #define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff" | |
| 98 | #include I(REQUEST_BEGIN) | |
| 99 | REQUEST(__field(0, 1, perf_collect_privileged) | |
| 100 | __field(0x1, 1, capability_mask) | |
| 101 | __array(0x2, 0xE, reserved) | |
| 102 | ) | |
| 103 | #include I(REQUEST_END) | |
| 104 | ||
| 97bf2640 CS |
105 | #define REQUEST_NAME processor_bus_utilization_abc_links |
| 106 | #define REQUEST_NUM 0x50 | |
| 107 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
| 108 | #include I(REQUEST_BEGIN) | |
| 109 | REQUEST(__field(0, 4, hw_chip_id) | |
| 110 | __array(0x4, 0xC, reserved1) | |
| 111 | __count(0x10, 8, total_link_cycles) | |
| 112 | __count(0x18, 8, idle_cycles_for_a_link) | |
| 113 | __count(0x20, 8, idle_cycles_for_b_link) | |
| 114 | __count(0x28, 8, idle_cycles_for_c_link) | |
| 115 | __array(0x30, 0x20, reserved2) | |
| 116 | ) | |
| 117 | #include I(REQUEST_END) | |
| 118 | ||
| 119 | #define REQUEST_NAME processor_bus_utilization_wxyz_links | |
| 120 | #define REQUEST_NUM 0x60 | |
| 121 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
| 122 | #include I(REQUEST_BEGIN) | |
| 123 | REQUEST(__field(0, 4, hw_chip_id) | |
| 124 | __array(0x4, 0xC, reserved1) | |
| 125 | __count(0x10, 8, total_link_cycles) | |
| 126 | __count(0x18, 8, idle_cycles_for_w_link) | |
| 127 | __count(0x20, 8, idle_cycles_for_x_link) | |
| 128 | __count(0x28, 8, idle_cycles_for_y_link) | |
| 129 | __count(0x30, 8, idle_cycles_for_z_link) | |
| 130 | __array(0x38, 0x28, reserved2) | |
| 131 | ) | |
| 132 | #include I(REQUEST_END) | |
| 133 | ||
| 134 | #define REQUEST_NAME processor_bus_utilization_gx_links | |
| 135 | #define REQUEST_NUM 0x70 | |
| 136 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
| 137 | #include I(REQUEST_BEGIN) | |
| 138 | REQUEST(__field(0, 4, hw_chip_id) | |
| 139 | __array(0x4, 0xC, reserved1) | |
| 140 | __count(0x10, 8, gx0_in_address_cycles) | |
| 141 | __count(0x18, 8, gx0_in_data_cycles) | |
| 142 | __count(0x20, 8, gx0_in_retries) | |
| 143 | __count(0x28, 8, gx0_in_bus_cycles) | |
| 144 | __count(0x30, 8, gx0_in_cycles_total) | |
| 145 | __count(0x38, 8, gx0_out_address_cycles) | |
| 146 | __count(0x40, 8, gx0_out_data_cycles) | |
| 147 | __count(0x48, 8, gx0_out_retries) | |
| 148 | __count(0x50, 8, gx0_out_bus_cycles) | |
| 149 | __count(0x58, 8, gx0_out_cycles_total) | |
| 150 | __count(0x60, 8, gx1_in_address_cycles) | |
| 151 | __count(0x68, 8, gx1_in_data_cycles) | |
| 152 | __count(0x70, 8, gx1_in_retries) | |
| 153 | __count(0x78, 8, gx1_in_bus_cycles) | |
| 154 | __count(0x80, 8, gx1_in_cycles_total) | |
| 155 | __count(0x88, 8, gx1_out_address_cycles) | |
| 156 | __count(0x90, 8, gx1_out_data_cycles) | |
| 157 | __count(0x98, 8, gx1_out_retries) | |
| 158 | __count(0xA0, 8, gx1_out_bus_cycles) | |
| 159 | __count(0xA8, 8, gx1_out_cycles_total) | |
| 160 | ) | |
| 161 | #include I(REQUEST_END) | |
| 162 | ||
| 163 | #define REQUEST_NAME processor_bus_utilization_mc_links | |
| 164 | #define REQUEST_NUM 0x80 | |
| 165 | #define REQUEST_IDX_KIND "hw_chip_id=?" | |
| 166 | #include I(REQUEST_BEGIN) | |
| 167 | REQUEST(__field(0, 4, hw_chip_id) | |
| 168 | __array(0x4, 0xC, reserved1) | |
| 169 | __count(0x10, 8, mc0_frames) | |
| 170 | __count(0x18, 8, mc0_reads) | |
| 171 | __count(0x20, 8, mc0_write) | |
| 172 | __count(0x28, 8, mc0_total_cycles) | |
| 173 | __count(0x30, 8, mc1_frames) | |
| 174 | __count(0x38, 8, mc1_reads) | |
| 175 | __count(0x40, 8, mc1_writes) | |
| 176 | __count(0x48, 8, mc1_total_cycles) | |
| 177 | ) | |
| 178 | #include I(REQUEST_END) | |
| 179 | ||
| 180 | /* Processor_config (0x90) skipped, no counters */ | |
| 181 | /* Current_processor_frequency (0x91) skipped, no counters */ | |
| 182 | ||
| 183 | #define REQUEST_NAME processor_core_utilization | |
| 184 | #define REQUEST_NUM 0x94 | |
| 185 | #define REQUEST_IDX_KIND "phys_processor_idx=?" | |
| 186 | #include I(REQUEST_BEGIN) | |
| 187 | REQUEST(__field(0, 4, phys_processor_idx) | |
| 188 | __field(0x4, 4, hw_processor_id) | |
| 189 | __count(0x8, 8, cycles_across_any_thread) | |
| 190 | __count(0x10, 8, timebase_at_collection) | |
| 191 | __count(0x18, 8, purr_cycles) | |
| 192 | __count(0x20, 8, sum_of_cycles_across_all_threads) | |
| 193 | __count(0x28, 8, instructions_completed) | |
| 194 | ) | |
| 195 | #include I(REQUEST_END) | |
| 196 | ||
| 197 | /* Processor_core_power_mode (0x95) skipped, no counters */ | |
| 198 | /* Affinity_domain_information_by_virtual_processor (0xA0) skipped, | |
| 199 | * no counters */ | |
| 200 | /* Affinity_domain_information_by_domain (0xB0) skipped, no counters */ | |
| 201 | /* Affinity_domain_information_by_partition (0xB1) skipped, no counters */ | |
| 202 | /* Physical_memory_info (0xC0) skipped, no counters */ | |
| 203 | /* Processor_bus_topology (0xD0) skipped, no counters */ | |
| 204 | ||
| 205 | #define REQUEST_NAME partition_hypervisor_queuing_times | |
| 206 | #define REQUEST_NUM 0xE0 | |
| 207 | #define REQUEST_IDX_KIND "partition_id=?" | |
| 208 | #include I(REQUEST_BEGIN) | |
| 209 | REQUEST(__field(0, 2, partition_id) | |
| 210 | __array(0x2, 6, reserved1) | |
| 211 | __count(0x8, 8, time_waiting_for_entitlement) | |
| 212 | __count(0x10, 8, times_waited_for_entitlement) | |
| 213 | __count(0x18, 8, time_waiting_for_phys_processor) | |
| 214 | __count(0x20, 8, times_waited_for_phys_processor) | |
| 215 | __count(0x28, 8, dispatches_on_home_core) | |
| 216 | __count(0x30, 8, dispatches_on_home_primary_affinity_domain) | |
| 217 | __count(0x38, 8, dispatches_on_home_secondary_affinity_domain) | |
| 218 | __count(0x40, 8, dispatches_off_home_secondary_affinity_domain) | |
| 219 | __count(0x48, 8, dispatches_on_dedicated_processor_donating_cycles) | |
| 220 | ) | |
| 221 | #include I(REQUEST_END) | |
| 222 | ||
| 223 | #define REQUEST_NAME system_hypervisor_times | |
| 224 | #define REQUEST_NUM 0xF0 | |
| 225 | #define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff" | |
| 226 | #include I(REQUEST_BEGIN) | |
| 227 | REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors) | |
| 228 | __count(0x8, 8, time_spent_processing_virtual_processor_timers) | |
| 229 | __count(0x10, 8, time_spent_managing_partitions_over_entitlement) | |
| 230 | __count(0x18, 8, time_spent_on_system_management) | |
| 231 | ) | |
| 232 | #include I(REQUEST_END) | |
| 233 | ||
| 234 | #define REQUEST_NAME system_tlbie_count_and_time | |
| 235 | #define REQUEST_NUM 0xF4 | |
| 236 | #define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff" | |
| 237 | #include I(REQUEST_BEGIN) | |
| 238 | REQUEST(__count(0, 8, tlbie_instructions_issued) | |
| 239 | /* | |
| 240 | * FIXME: The spec says the offset here is 0x10, which I suspect | |
| 241 | * is wrong. | |
| 242 | */ | |
| 243 | __count(0x8, 8, time_spent_issuing_tlbies) | |
| 244 | ) | |
| 245 | #include I(REQUEST_END) | |
| 246 | ||
| 247 | #define REQUEST_NAME partition_instruction_count_and_time | |
| 248 | #define REQUEST_NUM 0x100 | |
| 249 | #define REQUEST_IDX_KIND "partition_id=?" | |
| 250 | #include I(REQUEST_BEGIN) | |
| 251 | REQUEST(__field(0, 2, partition_id) | |
| 252 | __array(0x2, 0x6, reserved1) | |
| 253 | __count(0x8, 8, instructions_performed) | |
| 254 | __count(0x10, 8, time_collected) | |
| 255 | ) | |
| 256 | #include I(REQUEST_END) | |
| 257 | ||
| 258 | /* set_mmcrh (0x80001000) skipped, no counters */ | |
| 259 | /* retrieve_hpmcx (0x80002000) skipped, no counters */ | |
| 260 | ||
| 9e9f6010 | 261 | #include "req-gen/_end.h" |