]>
Commit | Line | Data |
---|---|---|
61305a96 BH |
1 | /* |
2 | * Support PCI/PCIe on PowerNV platforms | |
3 | * | |
4 | * Currently supports only P5IOC2 | |
5 | * | |
6 | * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License | |
10 | * as published by the Free Software Foundation; either version | |
11 | * 2 of the License, or (at your option) any later version. | |
12 | */ | |
13 | ||
14 | #include <linux/kernel.h> | |
15 | #include <linux/pci.h> | |
16 | #include <linux/delay.h> | |
17 | #include <linux/string.h> | |
18 | #include <linux/init.h> | |
19 | #include <linux/bootmem.h> | |
20 | #include <linux/irq.h> | |
21 | #include <linux/io.h> | |
c1a2562a | 22 | #include <linux/msi.h> |
61305a96 BH |
23 | |
24 | #include <asm/sections.h> | |
25 | #include <asm/io.h> | |
26 | #include <asm/prom.h> | |
27 | #include <asm/pci-bridge.h> | |
28 | #include <asm/machdep.h> | |
29 | #include <asm/ppc-pci.h> | |
30 | #include <asm/opal.h> | |
31 | #include <asm/iommu.h> | |
32 | #include <asm/tce.h> | |
f5339277 | 33 | #include <asm/firmware.h> |
61305a96 BH |
34 | |
35 | #include "powernv.h" | |
36 | #include "pci.h" | |
37 | ||
82ba129b BH |
38 | /* Delay in usec */ |
39 | #define PCI_RESET_DELAY_US 3000000 | |
61305a96 BH |
40 | |
41 | #define cfg_dbg(fmt...) do { } while(0) | |
42 | //#define cfg_dbg(fmt...) printk(fmt) | |
43 | ||
c1a2562a BH |
44 | #ifdef CONFIG_PCI_MSI |
45 | static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) | |
46 | { | |
47 | struct pci_controller *hose = pci_bus_to_host(pdev->bus); | |
48 | struct pnv_phb *phb = hose->private_data; | |
49 | ||
50 | return (phb && phb->msi_map) ? 0 : -ENODEV; | |
51 | } | |
52 | ||
53 | static unsigned int pnv_get_one_msi(struct pnv_phb *phb) | |
54 | { | |
f1c853b5 ME |
55 | unsigned long flags; |
56 | unsigned int id, rc; | |
57 | ||
58 | spin_lock_irqsave(&phb->lock, flags); | |
c1a2562a | 59 | |
c1a2562a BH |
60 | id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next); |
61 | if (id >= phb->msi_count && phb->msi_next) | |
62 | id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0); | |
63 | if (id >= phb->msi_count) { | |
f1c853b5 ME |
64 | rc = 0; |
65 | goto out; | |
c1a2562a BH |
66 | } |
67 | __set_bit(id, phb->msi_map); | |
f1c853b5 ME |
68 | rc = id + phb->msi_base; |
69 | out: | |
70 | spin_unlock_irqrestore(&phb->lock, flags); | |
71 | return rc; | |
c1a2562a BH |
72 | } |
73 | ||
74 | static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq) | |
75 | { | |
f1c853b5 | 76 | unsigned long flags; |
c1a2562a BH |
77 | unsigned int id; |
78 | ||
79 | if (WARN_ON(hwirq < phb->msi_base || | |
80 | hwirq >= (phb->msi_base + phb->msi_count))) | |
81 | return; | |
82 | id = hwirq - phb->msi_base; | |
f1c853b5 ME |
83 | |
84 | spin_lock_irqsave(&phb->lock, flags); | |
c1a2562a | 85 | __clear_bit(id, phb->msi_map); |
f1c853b5 | 86 | spin_unlock_irqrestore(&phb->lock, flags); |
c1a2562a BH |
87 | } |
88 | ||
89 | static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) | |
90 | { | |
91 | struct pci_controller *hose = pci_bus_to_host(pdev->bus); | |
92 | struct pnv_phb *phb = hose->private_data; | |
93 | struct msi_desc *entry; | |
94 | struct msi_msg msg; | |
95 | unsigned int hwirq, virq; | |
96 | int rc; | |
97 | ||
98 | if (WARN_ON(!phb)) | |
99 | return -ENODEV; | |
100 | ||
101 | list_for_each_entry(entry, &pdev->msi_list, list) { | |
102 | if (!entry->msi_attrib.is_64 && !phb->msi32_support) { | |
103 | pr_warn("%s: Supports only 64-bit MSIs\n", | |
104 | pci_name(pdev)); | |
105 | return -ENXIO; | |
106 | } | |
107 | hwirq = pnv_get_one_msi(phb); | |
108 | if (!hwirq) { | |
109 | pr_warn("%s: Failed to find a free MSI\n", | |
110 | pci_name(pdev)); | |
111 | return -ENOSPC; | |
112 | } | |
113 | virq = irq_create_mapping(NULL, hwirq); | |
114 | if (virq == NO_IRQ) { | |
115 | pr_warn("%s: Failed to map MSI to linux irq\n", | |
116 | pci_name(pdev)); | |
117 | pnv_put_msi(phb, hwirq); | |
118 | return -ENOMEM; | |
119 | } | |
120 | rc = phb->msi_setup(phb, pdev, hwirq, entry->msi_attrib.is_64, | |
121 | &msg); | |
122 | if (rc) { | |
123 | pr_warn("%s: Failed to setup MSI\n", pci_name(pdev)); | |
124 | irq_dispose_mapping(virq); | |
125 | pnv_put_msi(phb, hwirq); | |
126 | return rc; | |
127 | } | |
128 | irq_set_msi_desc(virq, entry); | |
129 | write_msi_msg(virq, &msg); | |
130 | } | |
131 | return 0; | |
132 | } | |
133 | ||
134 | static void pnv_teardown_msi_irqs(struct pci_dev *pdev) | |
135 | { | |
136 | struct pci_controller *hose = pci_bus_to_host(pdev->bus); | |
137 | struct pnv_phb *phb = hose->private_data; | |
138 | struct msi_desc *entry; | |
139 | ||
140 | if (WARN_ON(!phb)) | |
141 | return; | |
142 | ||
143 | list_for_each_entry(entry, &pdev->msi_list, list) { | |
144 | if (entry->irq == NO_IRQ) | |
145 | continue; | |
146 | irq_set_msi_desc(entry->irq, NULL); | |
147 | pnv_put_msi(phb, virq_to_hw(entry->irq)); | |
148 | irq_dispose_mapping(entry->irq); | |
149 | } | |
150 | } | |
151 | #endif /* CONFIG_PCI_MSI */ | |
61305a96 | 152 | |
cee72d5b BH |
153 | static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb) |
154 | { | |
155 | struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc; | |
156 | int i; | |
157 | ||
158 | pr_info("PHB %d diagnostic data:\n", phb->hose->global_number); | |
159 | ||
160 | pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl); | |
161 | ||
162 | pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg); | |
163 | pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus); | |
164 | pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus); | |
165 | ||
166 | pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus); | |
167 | pr_info(" slotStatus = 0x%08x\n", data->slotStatus); | |
168 | pr_info(" linkStatus = 0x%08x\n", data->linkStatus); | |
169 | pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus); | |
170 | pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus); | |
171 | ||
172 | pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus); | |
173 | pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus); | |
174 | pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus); | |
175 | pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1); | |
176 | pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2); | |
177 | pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3); | |
178 | pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4); | |
179 | pr_info(" sourceId = 0x%08x\n", data->sourceId); | |
180 | ||
181 | pr_info(" errorClass = 0x%016llx\n", data->errorClass); | |
182 | pr_info(" correlator = 0x%016llx\n", data->correlator); | |
183 | ||
184 | pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr); | |
185 | pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr); | |
186 | pr_info(" lemFir = 0x%016llx\n", data->lemFir); | |
187 | pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask); | |
188 | pr_info(" lemWOF = 0x%016llx\n", data->lemWOF); | |
189 | pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus); | |
190 | pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus); | |
191 | pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0); | |
192 | pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1); | |
193 | pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus); | |
194 | pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus); | |
195 | pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0); | |
196 | pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1); | |
197 | pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus); | |
198 | pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus); | |
199 | pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0); | |
200 | pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1); | |
201 | pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus); | |
202 | pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus); | |
203 | pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0); | |
204 | pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1); | |
205 | ||
206 | for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { | |
207 | if ((data->pestA[i] >> 63) == 0 && | |
208 | (data->pestB[i] >> 63) == 0) | |
209 | continue; | |
210 | pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]); | |
211 | pr_info(" PESTB = 0x%016llx\n", data->pestB[i]); | |
212 | } | |
213 | } | |
214 | ||
215 | static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb) | |
216 | { | |
217 | switch(phb->model) { | |
218 | case PNV_PHB_MODEL_P7IOC: | |
219 | pnv_pci_dump_p7ioc_diag_data(phb); | |
220 | break; | |
221 | default: | |
222 | pr_warning("PCI %d: Can't decode this PHB diag data\n", | |
223 | phb->hose->global_number); | |
224 | } | |
225 | } | |
226 | ||
227 | static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no) | |
228 | { | |
229 | unsigned long flags, rc; | |
230 | int has_diag; | |
231 | ||
232 | spin_lock_irqsave(&phb->lock, flags); | |
233 | ||
234 | rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE); | |
235 | has_diag = (rc == OPAL_SUCCESS); | |
236 | ||
237 | rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, | |
238 | OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); | |
239 | if (rc) { | |
240 | pr_warning("PCI %d: Failed to clear EEH freeze state" | |
241 | " for PE#%d, err %ld\n", | |
242 | phb->hose->global_number, pe_no, rc); | |
243 | ||
244 | /* For now, let's only display the diag buffer when we fail to clear | |
245 | * the EEH status. We'll do more sensible things later when we have | |
246 | * proper EEH support. We need to make sure we don't pollute ourselves | |
247 | * with the normal errors generated when probing empty slots | |
248 | */ | |
249 | if (has_diag) | |
250 | pnv_pci_dump_phb_diag_data(phb); | |
251 | else | |
252 | pr_warning("PCI %d: No diag data available\n", | |
253 | phb->hose->global_number); | |
254 | } | |
255 | ||
256 | spin_unlock_irqrestore(&phb->lock, flags); | |
257 | } | |
258 | ||
61305a96 BH |
259 | static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus, |
260 | u32 bdfn) | |
261 | { | |
262 | s64 rc; | |
263 | u8 fstate; | |
264 | u16 pcierr; | |
265 | u32 pe_no; | |
266 | ||
267 | /* Get PE# if we support IODA */ | |
268 | pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0; | |
269 | ||
270 | /* Read freeze status */ | |
271 | rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr, | |
272 | NULL); | |
273 | if (rc) { | |
274 | pr_warning("PCI %d: Failed to read EEH status for PE#%d," | |
275 | " err %lld\n", phb->hose->global_number, pe_no, rc); | |
276 | return; | |
277 | } | |
278 | cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n", | |
279 | bdfn, pe_no, fstate); | |
cee72d5b BH |
280 | if (fstate != 0) |
281 | pnv_pci_handle_eeh_config(phb, pe_no); | |
61305a96 BH |
282 | } |
283 | ||
284 | static int pnv_pci_read_config(struct pci_bus *bus, | |
285 | unsigned int devfn, | |
286 | int where, int size, u32 *val) | |
287 | { | |
288 | struct pci_controller *hose = pci_bus_to_host(bus); | |
289 | struct pnv_phb *phb = hose->private_data; | |
290 | u32 bdfn = (((uint64_t)bus->number) << 8) | devfn; | |
291 | s64 rc; | |
292 | ||
293 | if (hose == NULL) | |
294 | return PCIBIOS_DEVICE_NOT_FOUND; | |
295 | ||
296 | switch (size) { | |
297 | case 1: { | |
298 | u8 v8; | |
299 | rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8); | |
300 | *val = (rc == OPAL_SUCCESS) ? v8 : 0xff; | |
301 | break; | |
302 | } | |
303 | case 2: { | |
304 | u16 v16; | |
305 | rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where, | |
306 | &v16); | |
307 | *val = (rc == OPAL_SUCCESS) ? v16 : 0xffff; | |
308 | break; | |
309 | } | |
310 | case 4: { | |
311 | u32 v32; | |
312 | rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32); | |
313 | *val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff; | |
314 | break; | |
315 | } | |
316 | default: | |
317 | return PCIBIOS_FUNC_NOT_SUPPORTED; | |
318 | } | |
319 | cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n", | |
320 | bus->number, devfn, where, size, *val); | |
321 | ||
322 | /* Check if the PHB got frozen due to an error (no response) */ | |
323 | pnv_pci_config_check_eeh(phb, bus, bdfn); | |
324 | ||
325 | return PCIBIOS_SUCCESSFUL; | |
326 | } | |
327 | ||
328 | static int pnv_pci_write_config(struct pci_bus *bus, | |
329 | unsigned int devfn, | |
330 | int where, int size, u32 val) | |
331 | { | |
332 | struct pci_controller *hose = pci_bus_to_host(bus); | |
333 | struct pnv_phb *phb = hose->private_data; | |
334 | u32 bdfn = (((uint64_t)bus->number) << 8) | devfn; | |
335 | ||
336 | if (hose == NULL) | |
337 | return PCIBIOS_DEVICE_NOT_FOUND; | |
338 | ||
339 | cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n", | |
340 | bus->number, devfn, where, size, val); | |
341 | switch (size) { | |
342 | case 1: | |
343 | opal_pci_config_write_byte(phb->opal_id, bdfn, where, val); | |
344 | break; | |
345 | case 2: | |
346 | opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val); | |
347 | break; | |
348 | case 4: | |
349 | opal_pci_config_write_word(phb->opal_id, bdfn, where, val); | |
350 | break; | |
351 | default: | |
352 | return PCIBIOS_FUNC_NOT_SUPPORTED; | |
353 | } | |
354 | /* Check if the PHB got frozen due to an error (no response) */ | |
355 | pnv_pci_config_check_eeh(phb, bus, bdfn); | |
356 | ||
357 | return PCIBIOS_SUCCESSFUL; | |
358 | } | |
359 | ||
360 | struct pci_ops pnv_pci_ops = { | |
361 | .read = pnv_pci_read_config, | |
362 | .write = pnv_pci_write_config, | |
363 | }; | |
364 | ||
1f1616e8 BH |
365 | |
366 | static void pnv_tce_invalidate(struct iommu_table *tbl, | |
367 | u64 *startp, u64 *endp) | |
368 | { | |
369 | u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index; | |
370 | unsigned long start, end, inc; | |
371 | ||
372 | start = __pa(startp); | |
373 | end = __pa(endp); | |
374 | ||
375 | ||
376 | /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */ | |
377 | if (tbl->it_busno) { | |
378 | start <<= 12; | |
379 | end <<= 12; | |
380 | inc = 128 << 12; | |
381 | start |= tbl->it_busno; | |
382 | end |= tbl->it_busno; | |
383 | } | |
384 | /* p7ioc-style invalidation, 2 TCEs per write */ | |
385 | else if (tbl->it_type & TCE_PCI_SWINV_PAIR) { | |
386 | start |= (1ull << 63); | |
387 | end |= (1ull << 63); | |
388 | inc = 16; | |
389 | } | |
390 | /* Default (older HW) */ | |
391 | else | |
392 | inc = 128; | |
393 | ||
394 | end |= inc - 1; /* round up end to be different than start */ | |
395 | ||
396 | mb(); /* Ensure above stores are visible */ | |
397 | while (start <= end) { | |
398 | __raw_writeq(start, invalidate); | |
399 | start += inc; | |
400 | } | |
401 | /* The iommu layer will do another mb() for us on build() and | |
402 | * we don't care on free() | |
403 | */ | |
404 | } | |
405 | ||
406 | ||
61305a96 BH |
407 | static int pnv_tce_build(struct iommu_table *tbl, long index, long npages, |
408 | unsigned long uaddr, enum dma_data_direction direction, | |
409 | struct dma_attrs *attrs) | |
410 | { | |
411 | u64 proto_tce; | |
1f1616e8 | 412 | u64 *tcep, *tces; |
61305a96 BH |
413 | u64 rpn; |
414 | ||
415 | proto_tce = TCE_PCI_READ; // Read allowed | |
416 | ||
417 | if (direction != DMA_TO_DEVICE) | |
418 | proto_tce |= TCE_PCI_WRITE; | |
419 | ||
1f1616e8 BH |
420 | tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset; |
421 | rpn = __pa(uaddr) >> TCE_SHIFT; | |
61305a96 | 422 | |
1f1616e8 BH |
423 | while (npages--) |
424 | *(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT); | |
425 | ||
426 | /* Some implementations won't cache invalid TCEs and thus may not | |
427 | * need that flush. We'll probably turn it_type into a bit mask | |
428 | * of flags if that becomes the case | |
429 | */ | |
430 | if (tbl->it_type & TCE_PCI_SWINV_CREATE) | |
431 | pnv_tce_invalidate(tbl, tces, tcep - 1); | |
61305a96 | 432 | |
61305a96 BH |
433 | return 0; |
434 | } | |
435 | ||
436 | static void pnv_tce_free(struct iommu_table *tbl, long index, long npages) | |
437 | { | |
1f1616e8 BH |
438 | u64 *tcep, *tces; |
439 | ||
440 | tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset; | |
61305a96 BH |
441 | |
442 | while (npages--) | |
443 | *(tcep++) = 0; | |
1f1616e8 BH |
444 | |
445 | if (tbl->it_type & TCE_PCI_SWINV_FREE) | |
446 | pnv_tce_invalidate(tbl, tces, tcep - 1); | |
61305a96 BH |
447 | } |
448 | ||
449 | void pnv_pci_setup_iommu_table(struct iommu_table *tbl, | |
450 | void *tce_mem, u64 tce_size, | |
451 | u64 dma_offset) | |
452 | { | |
453 | tbl->it_blocksize = 16; | |
454 | tbl->it_base = (unsigned long)tce_mem; | |
455 | tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT; | |
456 | tbl->it_index = 0; | |
457 | tbl->it_size = tce_size >> 3; | |
458 | tbl->it_busno = 0; | |
459 | tbl->it_type = TCE_PCI; | |
460 | } | |
461 | ||
462 | static struct iommu_table * __devinit | |
463 | pnv_pci_setup_bml_iommu(struct pci_controller *hose) | |
464 | { | |
465 | struct iommu_table *tbl; | |
1f1616e8 | 466 | const __be64 *basep, *swinvp; |
61305a96 BH |
467 | const __be32 *sizep; |
468 | ||
469 | basep = of_get_property(hose->dn, "linux,tce-base", NULL); | |
470 | sizep = of_get_property(hose->dn, "linux,tce-size", NULL); | |
471 | if (basep == NULL || sizep == NULL) { | |
1f1616e8 BH |
472 | pr_err("PCI: %s has missing tce entries !\n", |
473 | hose->dn->full_name); | |
61305a96 BH |
474 | return NULL; |
475 | } | |
476 | tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node); | |
477 | if (WARN_ON(!tbl)) | |
478 | return NULL; | |
479 | pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)), | |
480 | be32_to_cpup(sizep), 0); | |
481 | iommu_init_table(tbl, hose->node); | |
1f1616e8 BH |
482 | |
483 | /* Deal with SW invalidated TCEs when needed (BML way) */ | |
484 | swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info", | |
485 | NULL); | |
486 | if (swinvp) { | |
487 | tbl->it_busno = swinvp[1]; | |
488 | tbl->it_index = (unsigned long)ioremap(swinvp[0], 8); | |
489 | tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; | |
490 | } | |
61305a96 BH |
491 | return tbl; |
492 | } | |
493 | ||
494 | static void __devinit pnv_pci_dma_fallback_setup(struct pci_controller *hose, | |
495 | struct pci_dev *pdev) | |
496 | { | |
497 | struct device_node *np = pci_bus_to_OF_node(hose->bus); | |
498 | struct pci_dn *pdn; | |
499 | ||
500 | if (np == NULL) | |
501 | return; | |
502 | pdn = PCI_DN(np); | |
503 | if (!pdn->iommu_table) | |
504 | pdn->iommu_table = pnv_pci_setup_bml_iommu(hose); | |
505 | if (!pdn->iommu_table) | |
506 | return; | |
507 | set_iommu_table_base(&pdev->dev, pdn->iommu_table); | |
508 | } | |
509 | ||
510 | static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev) | |
511 | { | |
512 | struct pci_controller *hose = pci_bus_to_host(pdev->bus); | |
513 | struct pnv_phb *phb = hose->private_data; | |
514 | ||
515 | /* If we have no phb structure, try to setup a fallback based on | |
516 | * the device-tree (RTAS PCI for example) | |
517 | */ | |
518 | if (phb && phb->dma_dev_setup) | |
519 | phb->dma_dev_setup(phb, pdev); | |
520 | else | |
521 | pnv_pci_dma_fallback_setup(hose, pdev); | |
522 | } | |
523 | ||
ca45cfe3 BH |
524 | /* Fixup wrong class code in p7ioc root complex */ |
525 | static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev) | |
526 | { | |
527 | dev->class = PCI_CLASS_BRIDGE_PCI << 8; | |
528 | } | |
529 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk); | |
530 | ||
82ba129b BH |
531 | static int pnv_pci_probe_mode(struct pci_bus *bus) |
532 | { | |
533 | struct pci_controller *hose = pci_bus_to_host(bus); | |
534 | const __be64 *tstamp; | |
535 | u64 now, target; | |
536 | ||
537 | ||
538 | /* We hijack this as a way to ensure we have waited long | |
539 | * enough since the reset was lifted on the PCI bus | |
540 | */ | |
541 | if (bus != hose->bus) | |
542 | return PCI_PROBE_NORMAL; | |
543 | tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL); | |
544 | if (!tstamp || !*tstamp) | |
545 | return PCI_PROBE_NORMAL; | |
546 | ||
547 | now = mftb() / tb_ticks_per_usec; | |
548 | target = (be64_to_cpup(tstamp) / tb_ticks_per_usec) | |
549 | + PCI_RESET_DELAY_US; | |
550 | ||
551 | pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n", | |
552 | hose->global_number, target, now); | |
553 | ||
554 | if (now < target) | |
555 | msleep((target - now + 999) / 1000); | |
556 | ||
557 | return PCI_PROBE_NORMAL; | |
558 | } | |
559 | ||
61305a96 BH |
560 | void __init pnv_pci_init(void) |
561 | { | |
562 | struct device_node *np; | |
563 | ||
673c9756 | 564 | pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN); |
61305a96 BH |
565 | |
566 | /* OPAL absent, try POPAL first then RTAS detection of PHBs */ | |
567 | if (!firmware_has_feature(FW_FEATURE_OPAL)) { | |
568 | #ifdef CONFIG_PPC_POWERNV_RTAS | |
569 | init_pci_config_tokens(); | |
570 | find_and_init_phbs(); | |
571 | #endif /* CONFIG_PPC_POWERNV_RTAS */ | |
184cd4a3 BH |
572 | } |
573 | /* OPAL is here, do our normal stuff */ | |
574 | else { | |
575 | int found_ioda = 0; | |
576 | ||
577 | /* Look for IODA IO-Hubs. We don't support mixing IODA | |
578 | * and p5ioc2 due to the need to change some global | |
579 | * probing flags | |
580 | */ | |
581 | for_each_compatible_node(np, NULL, "ibm,ioda-hub") { | |
582 | pnv_pci_init_ioda_hub(np); | |
583 | found_ioda = 1; | |
584 | } | |
61305a96 BH |
585 | |
586 | /* Look for p5ioc2 IO-Hubs */ | |
184cd4a3 BH |
587 | if (!found_ioda) |
588 | for_each_compatible_node(np, NULL, "ibm,p5ioc2") | |
589 | pnv_pci_init_p5ioc2_hub(np); | |
61305a96 BH |
590 | } |
591 | ||
592 | /* Setup the linkage between OF nodes and PHBs */ | |
593 | pci_devs_phb_init(); | |
594 | ||
595 | /* Configure IOMMU DMA hooks */ | |
596 | ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup; | |
597 | ppc_md.tce_build = pnv_tce_build; | |
598 | ppc_md.tce_free = pnv_tce_free; | |
82ba129b | 599 | ppc_md.pci_probe_mode = pnv_pci_probe_mode; |
61305a96 BH |
600 | set_pci_dma_ops(&dma_iommu_ops); |
601 | ||
c1a2562a BH |
602 | /* Configure MSIs */ |
603 | #ifdef CONFIG_PCI_MSI | |
604 | ppc_md.msi_check_device = pnv_msi_check_device; | |
605 | ppc_md.setup_msi_irqs = pnv_setup_msi_irqs; | |
606 | ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs; | |
607 | #endif | |
61305a96 | 608 | } |