[mirror_ubuntu-jammy-kernel.git] / arch / sh / boards / mach-microdev / io.c

// SPDX-License-Identifier: GPL-2.0
/*
 * linux/arch/sh/boards/superh/microdev/io.c
 *
 * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
 * Copyright (C) 2003, 2004 SuperH, Inc.
 * Copyright (C) 2004 Paul Mundt
 *
 * SuperH SH4-202 MicroDev board support.
 */

#include <linux/init.h>
#include <linux/pci.h>
#include <linux/wait.h>
#include <asm/io.h>
#include <mach/microdev.h>

	/*
	 *	we need to have a 'safe' address to re-direct all I/O requests
	 *	that we do not explicitly wish to handle. This safe address
	 *	must have the following properies:
	 *
	 *		* writes are ignored (no exception)
	 *		* reads are benign (no side-effects)
	 *		* accesses of width 1, 2 and 4-bytes are all valid.
	 *
	 *	The Processor Version Register (PVR) has these properties.
	 */
#define	PVR	0xff000030	/* Processor Version Register */


#define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */
#define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */
#define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */
#define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
#define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */
#define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */
#define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
#define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */
#define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */

#define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */
#define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */
#define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
#define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */
#define IO_SERIAL_EXTENT	0x10ul

#define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */
#define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
#define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */

/*
 * map I/O ports to memory-mapped addresses
 */
void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
{
	unsigned long result;

	if ((offset >= IO_LAN91C111_BASE) &&
	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
			/*
			 *	SMSC LAN91C111 Ethernet chip
			 */
		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
	} else if ((offset >= IO_SUPERIO_BASE) &&
		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
			/*
			 *	SMSC FDC37C93xAPM SuperIO chip
			 *
			 *	Configuration Registers
			 */
		result = IO_SUPERIO_PHYS + (offset << 1);
	} else if (((offset >= IO_IDE1_BASE) &&
		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
		    (offset == IO_IDE1_MISC)) {
			/*
			 *	SMSC FDC37C93xAPM SuperIO chip
			 *
			 *	IDE #1
			 */
	        result = IO_SUPERIO_PHYS + (offset << 1);
	} else if (((offset >= IO_IDE2_BASE) &&
		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
		    (offset == IO_IDE2_MISC)) {
			/*
			 *	SMSC FDC37C93xAPM SuperIO chip
			 *
			 *	IDE #2
			 */
	        result = IO_SUPERIO_PHYS + (offset << 1);
	} else if ((offset >= IO_SERIAL1_BASE) &&
		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
			/*
			 *	SMSC FDC37C93xAPM SuperIO chip
			 *
			 *	Serial #1
			 */
		result = IO_SUPERIO_PHYS + (offset << 1);
	} else if ((offset >= IO_SERIAL2_BASE) &&
		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
			/*
			 *	SMSC FDC37C93xAPM SuperIO chip
			 *
			 *	Serial #2
			 */
		result = IO_SUPERIO_PHYS + (offset << 1);
	} else if ((offset >= IO_ISP1161_BASE) &&
		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
			/*
			 *	Philips USB ISP1161x chip
			 */
		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
	} else {
			/*
			 *	safe default.
			 */
		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
		       __func__, offset);
		result = PVR;
	}

	return (void __iomem *)result;
}
Commit	Line	Data
aaf9128a	1	// SPDX-License-Identifier: GPL-2.0
1da177e4	2	/*
f30c2269	3	* linux/arch/sh/boards/superh/microdev/io.c
1da177e4 LT	4	*
	5	* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
	6	* Copyright (C) 2003, 2004 SuperH, Inc.
	7	* Copyright (C) 2004 Paul Mundt
	8	*
	9	* SuperH SH4-202 MicroDev board support.
1da177e4 LT	10	*/
1da177e4 LT	11
1da177e4 LT	12	#include <linux/init.h>
	13	#include <linux/pci.h>
	14	#include <linux/wait.h>
	15	#include <asm/io.h>
7639a454	16	#include <mach/microdev.h>
1da177e4 LT	17
	18	/*
	19	* we need to have a 'safe' address to re-direct all I/O requests
	20	* that we do not explicitly wish to handle. This safe address
	21	* must have the following properies:
	22	*
	23	* * writes are ignored (no exception)
	24	* * reads are benign (no side-effects)
	25	* * accesses of width 1, 2 and 4-bytes are all valid.
	26	*
	27	* The Processor Version Register (PVR) has these properties.
	28	*/
	29	#define PVR 0xff000030 /* Processor Version Register */
	30
	31
	32	#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */
	33	#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */
	34	#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */
	35	#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
	36	#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */
	37	#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */
	38	#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
	39	#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */
	40	#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
	41
	42	#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */
	43	#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */
	44	#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
	45	#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */
	46	#define IO_SERIAL_EXTENT 0x10ul
	47
	48	#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */
	49	#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
	50	#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
	51
74017294 PM	52	/*
	53	* map I/O ports to memory-mapped addresses
	54	*/
46bc8587	55	void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
74017294 PM	56	{
	57	unsigned long result;
	58
	59	if ((offset >= IO_LAN91C111_BASE) &&
	60	(offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
	61	/*
	62	* SMSC LAN91C111 Ethernet chip
	63	*/
	64	result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
	65	} else if ((offset >= IO_SUPERIO_BASE) &&
	66	(offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
	67	/*
	68	* SMSC FDC37C93xAPM SuperIO chip
	69	*
	70	* Configuration Registers
	71	*/
	72	result = IO_SUPERIO_PHYS + (offset << 1);
74017294 PM	73	} else if (((offset >= IO_IDE1_BASE) &&
	74	(offset < IO_IDE1_BASE + IO_IDE_EXTENT)) \|\|
	75	(offset == IO_IDE1_MISC)) {
	76	/*
	77	* SMSC FDC37C93xAPM SuperIO chip
	78	*
	79	* IDE #1
	80	*/
	81	result = IO_SUPERIO_PHYS + (offset << 1);
	82	} else if (((offset >= IO_IDE2_BASE) &&
	83	(offset < IO_IDE2_BASE + IO_IDE_EXTENT)) \|\|
	84	(offset == IO_IDE2_MISC)) {
	85	/*
	86	* SMSC FDC37C93xAPM SuperIO chip
	87	*
	88	* IDE #2
	89	*/
	90	result = IO_SUPERIO_PHYS + (offset << 1);
	91	} else if ((offset >= IO_SERIAL1_BASE) &&
	92	(offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
	93	/*
	94	* SMSC FDC37C93xAPM SuperIO chip
	95	*
	96	* Serial #1
	97	*/
	98	result = IO_SUPERIO_PHYS + (offset << 1);
	99	} else if ((offset >= IO_SERIAL2_BASE) &&
	100	(offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
	101	/*
	102	* SMSC FDC37C93xAPM SuperIO chip
	103	*
	104	* Serial #2
	105	*/
	106	result = IO_SUPERIO_PHYS + (offset << 1);
	107	} else if ((offset >= IO_ISP1161_BASE) &&
	108	(offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
	109	/*
	110	* Philips USB ISP1161x chip
	111	*/
	112	result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
	113	} else {
	114	/*
	115	* safe default.
	116	*/
	117	printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
866e6b9e	118	__func__, offset);
74017294 PM	119	result = PVR;
	120	}
	121
46bc8587	122	return (void __iomem *)result;
1da177e4	123	}