x86: x2apic, IR: Clean up X86_X2APIC and INTR_REMAP config checks

[mirror_ubuntu-artful-kernel.git] / arch / x86 / include / asm / apic.h

#ifndef _ASM_X86_APIC_H
#define _ASM_X86_APIC_H

#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/pm.h>

#include <asm/alternative.h>
#include <asm/cpufeature.h>
#include <asm/processor.h>
#include <asm/apicdef.h>
#include <asm/atomic.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/system.h>
#include <asm/msr.h>

#define ARCH_APICTIMER_STOPS_ON_C3	1

/*
 * Debugging macros
 */
#define APIC_QUIET   0
#define APIC_VERBOSE 1
#define APIC_DEBUG   2

/*
 * Define the default level of output to be very little
 * This can be turned up by using apic=verbose for more
 * information and apic=debug for _lots_ of information.
 * apic_verbosity is defined in apic.c
 */
#define apic_printk(v, s, a...) do {       \
		if ((v) <= apic_verbosity) \
			printk(s, ##a);    \
	} while (0)


#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
extern void generic_apic_probe(void);
#else
static inline void generic_apic_probe(void)
{
}
#endif

#ifdef CONFIG_X86_LOCAL_APIC

extern unsigned int apic_verbosity;
extern int local_apic_timer_c2_ok;

extern int disable_apic;

#ifdef CONFIG_SMP
extern void __inquire_remote_apic(int apicid);
#else /* CONFIG_SMP */
static inline void __inquire_remote_apic(int apicid)
{
}
#endif /* CONFIG_SMP */

static inline void default_inquire_remote_apic(int apicid)
{
	if (apic_verbosity >= APIC_DEBUG)
		__inquire_remote_apic(apicid);
}

/*
 * Basic functions accessing APICs.
 */
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define setup_boot_clock setup_boot_APIC_clock
#define setup_secondary_clock setup_secondary_APIC_clock
#endif

#ifdef CONFIG_X86_64
extern int is_vsmp_box(void);
#else
static inline int is_vsmp_box(void)
{
	return 0;
}
#endif
extern void xapic_wait_icr_idle(void);
extern u32 safe_xapic_wait_icr_idle(void);
extern void xapic_icr_write(u32, u32);
extern int setup_profiling_timer(unsigned int);

static inline void native_apic_mem_write(u32 reg, u32 v)
{
	volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);

	alternative_io("movl %0, %1", "xchgl %0, %1", X86_FEATURE_11AP,
		       ASM_OUTPUT2("=r" (v), "=m" (*addr)),
		       ASM_OUTPUT2("0" (v), "m" (*addr)));
}

static inline u32 native_apic_mem_read(u32 reg)
{
	return *((volatile u32 *)(APIC_BASE + reg));
}

extern void native_apic_wait_icr_idle(void);
extern u32 native_safe_apic_wait_icr_idle(void);
extern void native_apic_icr_write(u32 low, u32 id);
extern u64 native_apic_icr_read(void);

extern int x2apic_mode;

#ifdef CONFIG_X86_X2APIC
/*
 * Make previous memory operations globally visible before
 * sending the IPI through x2apic wrmsr. We need a serializing instruction or
 * mfence for this.
 */
static inline void x2apic_wrmsr_fence(void)
{
	asm volatile("mfence" : : : "memory");
}

static inline void native_apic_msr_write(u32 reg, u32 v)
{
	if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
	    reg == APIC_LVR)
		return;

	wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0);
}

static inline u32 native_apic_msr_read(u32 reg)
{
	u32 low, high;

	if (reg == APIC_DFR)
		return -1;

	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
	return low;
}

static inline void native_x2apic_wait_icr_idle(void)
{
	/* no need to wait for icr idle in x2apic */
	return;
}

static inline u32 native_safe_x2apic_wait_icr_idle(void)
{
	/* no need to wait for icr idle in x2apic */
	return 0;
}

static inline void native_x2apic_icr_write(u32 low, u32 id)
{
	wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
}

static inline u64 native_x2apic_icr_read(void)
{
	unsigned long val;

	rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
	return val;
}

extern int x2apic_phys;
extern void check_x2apic(void);
extern void enable_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
static inline int x2apic_enabled(void)
{
	int msr, msr2;

	if (!cpu_has_x2apic)
		return 0;

	rdmsr(MSR_IA32_APICBASE, msr, msr2);
	if (msr & X2APIC_ENABLE)
		return 1;
	return 0;
}

#define x2apic_supported()	(cpu_has_x2apic)
#else
static inline void check_x2apic(void)
{
}
static inline void enable_x2apic(void)
{
}
static inline int x2apic_enabled(void)
{
	return 0;
}

#define	x2apic_preenabled 0
#define	x2apic_supported()	0
#endif

extern void enable_IR_x2apic(void);

extern int get_physical_broadcast(void);

extern void apic_disable(void);
extern int lapic_get_maxlvt(void);
extern void clear_local_APIC(void);
extern void connect_bsp_APIC(void);
extern void disconnect_bsp_APIC(int virt_wire_setup);
extern void disable_local_APIC(void);
extern void lapic_shutdown(void);
extern int verify_local_APIC(void);
extern void cache_APIC_registers(void);
extern void sync_Arb_IDs(void);
extern void init_bsp_APIC(void);
extern void setup_local_APIC(void);
extern void end_local_APIC_setup(void);
extern void init_apic_mappings(void);
extern void setup_boot_APIC_clock(void);
extern void setup_secondary_APIC_clock(void);
extern int APIC_init_uniprocessor(void);
extern void enable_NMI_through_LVT0(void);

/*
 * On 32bit this is mach-xxx local
 */
#ifdef CONFIG_X86_64
extern void early_init_lapic_mapping(void);
extern int apic_is_clustered_box(void);
#else
static inline int apic_is_clustered_box(void)
{
	return 0;
}
#endif

extern u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask);
extern u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask);


#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
#define local_apic_timer_c2_ok		1
static inline void init_apic_mappings(void) { }
static inline void disable_local_APIC(void) { }
static inline void apic_disable(void) { }
#endif /* !CONFIG_X86_LOCAL_APIC */

#ifdef CONFIG_X86_64
#define	SET_APIC_ID(x)		(apic->set_apic_id(x))
#else

#endif

/*
 * Copyright 2004 James Cleverdon, IBM.
 * Subject to the GNU Public License, v.2
 *
 * Generic APIC sub-arch data struct.
 *
 * Hacked for x86-64 by James Cleverdon from i386 architecture code by
 * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
 * James Cleverdon.
 */
struct apic {
	char *name;

	int (*probe)(void);
	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
	int (*apic_id_registered)(void);

	u32 irq_delivery_mode;
	u32 irq_dest_mode;

	const struct cpumask *(*target_cpus)(void);

	int disable_esr;

	int dest_logical;
	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
	unsigned long (*check_apicid_present)(int apicid);

	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
	void (*init_apic_ldr)(void);

	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);

	void (*setup_apic_routing)(void);
	int (*multi_timer_check)(int apic, int irq);
	int (*apicid_to_node)(int logical_apicid);
	int (*cpu_to_logical_apicid)(int cpu);
	int (*cpu_present_to_apicid)(int mps_cpu);
	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
	void (*setup_portio_remap)(void);
	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
	void (*enable_apic_mode)(void);
	int (*phys_pkg_id)(int cpuid_apic, int index_msb);

	/*
	 * When one of the next two hooks returns 1 the apic
	 * is switched to this. Essentially they are additional
	 * probe functions:
	 */
	int (*mps_oem_check)(struct mpc_table *mpc, char *oem, char *productid);

	unsigned int (*get_apic_id)(unsigned long x);
	unsigned long (*set_apic_id)(unsigned int id);
	unsigned long apic_id_mask;

	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
					       const struct cpumask *andmask);

	/* ipi */
	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
					 int vector);
	void (*send_IPI_allbutself)(int vector);
	void (*send_IPI_all)(int vector);
	void (*send_IPI_self)(int vector);

	/* wakeup_secondary_cpu */
	int (*wakeup_secondary_cpu)(int apicid, unsigned long start_eip);

	int trampoline_phys_low;
	int trampoline_phys_high;

	void (*wait_for_init_deassert)(atomic_t *deassert);
	void (*smp_callin_clear_local_apic)(void);
	void (*inquire_remote_apic)(int apicid);

	/* apic ops */
	u32 (*read)(u32 reg);
	void (*write)(u32 reg, u32 v);
	u64 (*icr_read)(void);
	void (*icr_write)(u32 low, u32 high);
	void (*wait_icr_idle)(void);
	u32 (*safe_wait_icr_idle)(void);
};

/*
 * Pointer to the local APIC driver in use on this system (there's
 * always just one such driver in use - the kernel decides via an
 * early probing process which one it picks - and then sticks to it):
 */
extern struct apic *apic;

/*
 * APIC functionality to boot other CPUs - only used on SMP:
 */
#ifdef CONFIG_SMP
extern atomic_t init_deasserted;
extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
#endif

static inline u32 apic_read(u32 reg)
{
	return apic->read(reg);
}

static inline void apic_write(u32 reg, u32 val)
{
	apic->write(reg, val);
}

static inline u64 apic_icr_read(void)
{
	return apic->icr_read();
}

static inline void apic_icr_write(u32 low, u32 high)
{
	apic->icr_write(low, high);
}

static inline void apic_wait_icr_idle(void)
{
	apic->wait_icr_idle();
}

static inline u32 safe_apic_wait_icr_idle(void)
{
	return apic->safe_wait_icr_idle();
}


static inline void ack_APIC_irq(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
	/*
	 * ack_APIC_irq() actually gets compiled as a single instruction
	 * ... yummie.
	 */

	/* Docs say use 0 for future compatibility */
	apic_write(APIC_EOI, 0);
#endif
}

static inline unsigned default_get_apic_id(unsigned long x)
{
	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));

	if (APIC_XAPIC(ver))
		return (x >> 24) & 0xFF;
	else
		return (x >> 24) & 0x0F;
}

/*
 * Warm reset vector default position:
 */
#define DEFAULT_TRAMPOLINE_PHYS_LOW		0x467
#define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469

#ifdef CONFIG_X86_64
extern struct apic apic_flat;
extern struct apic apic_physflat;
extern struct apic apic_x2apic_cluster;
extern struct apic apic_x2apic_phys;
extern int default_acpi_madt_oem_check(char *, char *);

extern void apic_send_IPI_self(int vector);

extern struct apic apic_x2apic_uv_x;
DECLARE_PER_CPU(int, x2apic_extra_bits);

extern int default_cpu_present_to_apicid(int mps_cpu);
extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
#endif

static inline void default_wait_for_init_deassert(atomic_t *deassert)
{
	while (!atomic_read(deassert))
		cpu_relax();
	return;
}

extern void generic_bigsmp_probe(void);


#ifdef CONFIG_X86_LOCAL_APIC

#include <asm/smp.h>

#define APIC_DFR_VALUE	(APIC_DFR_FLAT)

static inline const struct cpumask *default_target_cpus(void)
{
#ifdef CONFIG_SMP
	return cpu_online_mask;
#else
	return cpumask_of(0);
#endif
}

DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);


static inline unsigned int read_apic_id(void)
{
	unsigned int reg;

	reg = apic_read(APIC_ID);

	return apic->get_apic_id(reg);
}

extern void default_setup_apic_routing(void);

#ifdef CONFIG_X86_32
/*
 * Set up the logical destination ID.
 *
 * Intel recommends to set DFR, LDR and TPR before enabling
 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
 * document number 292116).  So here it goes...
 */
extern void default_init_apic_ldr(void);

static inline int default_apic_id_registered(void)
{
	return physid_isset(read_apic_id(), phys_cpu_present_map);
}

static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
{
	return cpuid_apic >> index_msb;
}

extern int default_apicid_to_node(int logical_apicid);

#endif

static inline unsigned int
default_cpu_mask_to_apicid(const struct cpumask *cpumask)
{
	return cpumask_bits(cpumask)[0] & APIC_ALL_CPUS;
}

static inline unsigned int
default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
			       const struct cpumask *andmask)
{
	unsigned long mask1 = cpumask_bits(cpumask)[0];
	unsigned long mask2 = cpumask_bits(andmask)[0];
	unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];

	return (unsigned int)(mask1 & mask2 & mask3);
}

static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
{
	return physid_isset(apicid, bitmap);
}

static inline unsigned long default_check_apicid_present(int bit)
{
	return physid_isset(bit, phys_cpu_present_map);
}

static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
{
	return phys_map;
}

/* Mapping from cpu number to logical apicid */
static inline int default_cpu_to_logical_apicid(int cpu)
{
	return 1 << cpu;
}

static inline int __default_cpu_present_to_apicid(int mps_cpu)
{
	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
	else
		return BAD_APICID;
}

static inline int
__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
{
	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
}

#ifdef CONFIG_X86_32
static inline int default_cpu_present_to_apicid(int mps_cpu)
{
	return __default_cpu_present_to_apicid(mps_cpu);
}

static inline int
default_check_phys_apicid_present(int boot_cpu_physical_apicid)
{
	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
}
#else
extern int default_cpu_present_to_apicid(int mps_cpu);
extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
#endif

static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
{
	return physid_mask_of_physid(phys_apicid);
}

#endif /* CONFIG_X86_LOCAL_APIC */

#ifdef CONFIG_X86_32
extern u8 cpu_2_logical_apicid[NR_CPUS];
#endif

#endif /* _ASM_X86_APIC_H */