]>
Commit | Line | Data |
---|---|---|
945cad7f JP |
1 | openvswitch (1.8.90-1) unstable; urgency=low |
2 | [ Open vSwitch team ] | |
3 | * New upstream version | |
4 | - Nothing yet! Try NEWS... | |
5 | ||
6 | -- Open vSwitch team <dev@openvswitch.org> Mon, 07 May 2012 14:14:52 +0900 | |
7 | ||
f3608bf1 | 8 | openvswitch (1.8.0-1) unstable; urgency=low |
c8d5d22c JP |
9 | [ Open vSwitch team ] |
10 | * New upstream version | |
f3608bf1 JP |
11 | - New FAQ. Please send updates and additions! |
12 | - Authors of controllers, please read the new section titled "Action | |
13 | Reproduction" in DESIGN, which describes an Open vSwitch change in | |
14 | behavior in corner cases that may affect some controllers. | |
15 | - ovs-l3ping: | |
16 | - A new test utility that can create L3 tunnel between two Open | |
17 | vSwitches and detect connectivity issues. | |
18 | - ovs-ofctl: | |
19 | - New --sort and --rsort options for "dump-flows" command. | |
20 | - "mod-port" command can now control all OpenFlow config flags. | |
21 | - OpenFlow: | |
22 | - Allow general bitwise masking for IPv4 and IPv6 addresses in | |
23 | IPv4, IPv6, and ARP packets. (Previously, only CIDR masks | |
24 | were allowed.) | |
25 | - Allow support for arbitrary Ethernet masks. (Previously, only | |
26 | the multicast bit in the destination address could be individually | |
27 | masked.) | |
28 | - New field OXM_OF_METADATA, to align with OpenFlow 1.1. | |
29 | - The OFPST_QUEUE request now reports an error if a specified port or | |
30 | queue does not exist, or for requests for a specific queue on all | |
31 | ports, if the specified queue does not exist on any port. (Previous | |
32 | versions generally reported an empty set of results.) | |
33 | - New "flow monitor" feature to allow controllers to be notified of | |
34 | flow table changes as they happen. | |
35 | - Additional protocols are not mirrored and dropped when forward-bpdu is | |
36 | false. For a full list, see the ovs-vswitchd.conf.db man page. | |
37 | - Open vSwitch now sends RARP packets in situations where it previously | |
38 | sent a custom protocol, making it consistent with behavior of QEMU and | |
39 | VMware. | |
40 | - All Open vSwitch programs and log files now show timestamps in UTC, | |
41 | instead the local timezone, by default. | |
c8d5d22c | 42 | |
f3608bf1 | 43 | -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900 |
c8d5d22c | 44 | |
d8b11fb9 | 45 | openvswitch (1.7.0-1) unstable; urgency=low |
d0a8c2e0 JP |
46 | [ Open vSwitch team ] |
47 | * New upstream version | |
d8b11fb9 JP |
48 | - kernel modules are renamed. openvswitch_mod.ko is now |
49 | openvswitch.ko and brcompat_mod.ko is now brcompat.ko. | |
50 | - Increased the number of NXM registers to 8. | |
51 | - Added ability to configure dscp setting for manager and controller | |
52 | connections. By default, these connections have a DSCP value of | |
53 | Internetwork Control (0xc0). | |
54 | - Added the granular link health statistics, 'cfm_health', to an | |
55 | interface. | |
56 | - OpenFlow: | |
57 | - Added support to mask nd_target for ICMPv6 neighbor discovery flows. | |
58 | - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC) | |
59 | multipart messages. | |
60 | - ovs-ofctl: | |
61 | - Added the "dump-ports-desc" command to retrieve port | |
62 | information using the new port description multipart messages. | |
63 | - ovs-test: | |
64 | - Added support for spawning ovs-test server from the client. | |
65 | - Now ovs-test is able to automatically create test bridges and ports. | |
66 | - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows. | |
67 | - The "coverage/log" command previously available through ovs-appctl | |
68 | has been replaced by "coverage/show". The new command replies with | |
69 | coverage counter values, instead of logging them. | |
d0a8c2e0 | 70 | |
d8b11fb9 | 71 | -- Open vSwitch team <dev@openvswitch.org> Mon, 07 May 2012 14:11:52 +0900 |
dd1ba5b3 | 72 | |
9d564cb2 JP |
73 | openvswitch (1.6.1-1) unstable; urgency=low |
74 | [ Open vSwitch team ] | |
75 | * New upstream version | |
76 | - Allow OFPP_CONTROLLER as the in_port for packet-out messages. | |
77 | ||
78 | -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900 | |
79 | ||
dd1ba5b3 JP |
80 | openvswitch (1.6.0-1) unstable; urgency=low |
81 | [ Open vSwitch team ] | |
82 | * New upstream version | |
83 | - bonding | |
84 | - LACP bonds no longer fall back to balance-slb when negotiations fail. | |
85 | Instead they drop traffic. | |
86 | - The default bond_mode changed from SLB to active-backup, to protect | |
87 | unsuspecting users from the significant risks of SLB bonds (which are | |
88 | documented in vswitchd/INTERNALS). | |
89 | - Load balancing can be disabled by setting the bond-rebalance-interval | |
90 | to zero. | |
91 | - OpenFlow: | |
92 | - Added support for bitwise matching on TCP and UDP ports. | |
93 | See ovs-ofctl(8) for more information. | |
94 | - NXM flow dumps now include times elapsed toward idle and hard | |
95 | timeouts. | |
96 | - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows | |
97 | controllers more precise control over which OpenFlow messages they | |
98 | receive asynchronously. | |
99 | - New "fin_timeout" action. | |
100 | - Added "fin_timeout" support to "learn" action. | |
101 | - The default MAC learning timeout has been increased from 60 seconds | |
102 | to 300 seconds. The MAC learning timeout is now configurable. | |
103 | - When QoS settings for an interface do not configure a default queue | |
104 | (queue 0), Open vSwitch now uses a default configuration for that | |
105 | queue, instead of dropping all packets as in previous versions. | |
106 | - Logging to console and file will have UTC timestamp as a default for all | |
107 | the daemons. An example of the default format is 2012-01-27T16:35:17Z. | |
108 | ovs-appctl can be used to change the default format as before. | |
109 | - New support for limiting the number of flows in an OpenFlow flow | |
110 | table, with configurable policy for evicting flows upon | |
111 | overflow. See the Flow_Table table in ovs-vswitch.conf.db(5) | |
112 | for more information. | |
113 | - New "enable-async-messages" column in the Controller table. If set to | |
114 | false, OpenFlow connections to the controller will initially have all | |
115 | asynchronous messages disabled, overriding normal OpenFlow behavior. | |
116 | - ofproto-provider interface: | |
117 | - "struct rule" has a new member "used" that ofproto implementations | |
118 | should maintain by updating with ofproto_rule_update_used(). | |
119 | - ovsdb-client: | |
120 | - The new option --timestamp causes the "monitor" command to print | |
121 | a timestamp with every update. | |
122 | - CFM module CCM broadcasts can now be tagged with an 802.1p priority. | |
123 | ||
124 | -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900 | |
d0a8c2e0 JP |
125 | |
126 | openvswitch (1.5.0-1) unstable; urgency=low | |
127 | [ Open vSwitch team ] | |
128 | * New upstream version | |
129 | - OpenFlow: | |
130 | - Added support for querying, modifying, and deleting flows | |
131 | based on flow cookie when using NXM. | |
132 | - Added new NXM_PACKET_IN format. | |
133 | - ovs-ofctl: | |
134 | - Added daemonization support to the monitor and snoop commands. | |
135 | - ovs-vsctl: | |
136 | - The "find" command supports new set relational operators | |
137 | {=}, {!=}, {<}, {>}, {<=}, and {>=}. | |
138 | - ovsdb-tool now uses the typical database and schema installation | |
139 | directories as defaults. | |
140 | ||
a6492d91 | 141 | -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900 |
4807e7b6 | 142 | |
34c1f33b BP |
143 | openvswitch (1.4.0+git20120426-1) unstable; urgency=low |
144 | ||
145 | * New upstream release fixing the following bugs: | |
146 | o Broken log rotation. | |
147 | o Use-after-free error when ports disappear. | |
148 | o Minor memory leaks. | |
149 | o Testsuite failures on big-endian architectures. | |
150 | ||
151 | -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700 | |
152 | ||
153 | openvswitch (1.4.0+git20120321-1) unstable; urgency=low | |
154 | ||
155 | * New upstream version including: | |
156 | o Features: | |
157 | - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0. | |
158 | - vswitchd: Make the MAC entry aging time configurable. | |
159 | - mac-learning: Increase MAC learning timeout to 300 seconds. | |
160 | o Bug fixes: | |
161 | - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes | |
162 | queues. | |
163 | - netlink-socket: Increase Netlink socket receive buffer size. | |
164 | - ofproto: Fix code that keeps track of MTU. | |
165 | - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes | |
166 | - bond: Incorrectly reported an error in appctl. | |
167 | - socket-util: Unlink Unix domain sockets that bind but fail to connect. | |
168 | - bridge: Remove unwanted ports at time of ofproto creation. | |
169 | - dpif-linux: Make dpif_linux_port_query_by_name() query only one | |
170 | datapath. | |
171 | - ofproto-dpif: Cleanup STP on ports when disabled on their bridge. | |
172 | - configure: Try to extract kernel source directory from build Makefile. | |
173 | - vswitchd: Always configure a default queue for QoS. | |
174 | - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL. | |
175 | - sflow_agent: Use snprintf() in place of sprintf(). | |
176 | o Packaging: | |
177 | - Move PKI directory to FHS-compliant location. Closes: #661090. | |
178 | Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting | |
179 | this bug. | |
180 | - Use a different way to avoid failing install without kernel module. | |
181 | - Avoid unit test failure when doing "unofficial" builds. | |
182 | - Bump standards-version to 3.9.3. | |
183 | - Remove some useless files from the dkms package. | |
184 | - Clean .pyc files in "clean" target. | |
185 | - Remove po-debconf build dependency. | |
186 | - Build-depend on python-all to pull in all Python versions. | |
187 | - Add missing ${python:Depends} to openvswitch-test package. | |
188 | - Improve long descriptions so as to better describe the packages. | |
189 | - Bump debhelper compat level to 8 and make build-depends consistent. | |
190 | - Fix exit status of openvswitch-switch init script "status" command. | |
191 | - Use provided kernel source dir instead of host kernel version. | |
192 | - Do not run "make" if "configure" fails during DKMS build. | |
193 | - Look in /lib/modules instead of /usr/src for DKMS kernel sources. | |
194 | - Fix dependencies for openvswitch-datapath-dkms package. | |
195 | - Don't install Python modules for obsolete Python versions. | |
196 | - Add dependency on ${misc:Depends} to openvswitch-test | |
197 | o Documentation improvements: | |
198 | - ovsdb-doc: Use minus sign in negative numbers in nroff output. | |
199 | - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a | |
200 | hyphen. | |
201 | - ovsdb-doc: Put NAME section into generated manpage. | |
202 | - Fix typo in manpage. | |
203 | - vswitchd: Document behavior of 802.1p priorities with VLAN splinters. | |
204 | - netdev: Fix typo in error message. | |
205 | - INSTALL.Linux: minor typo | |
206 | ||
207 | * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many | |
208 | of the packaging fixes listed above. | |
209 | ||
210 | * This version fixes most of the lintian errors described in bug | |
211 | #663051, but a few remain, so this upload does not close that bug. I | |
212 | believe that this upload should be suitable for downgrading that bug's | |
213 | severity. | |
214 | ||
215 | -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700 | |
216 | ||
217 | openvswitch (1.4.0-2+nmu1) unstable; urgency=low | |
218 | ||
219 | * Non maintainer upload. | |
220 | * Removes all patches in debian/patches, because they are patching stuff | |
221 | inconditionally in debian/*, and this should be applied by default. | |
222 | * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that | |
223 | the kernel module builds as expected (Closes: #659685). | |
224 | ||
225 | -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000 | |
226 | ||
4807e7b6 SH |
227 | openvswitch (1.4.0-2) unstable; urgency=low |
228 | ||
229 | * Use explicit DKMS variable for kernel source directory | |
230 | - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch | |
231 | - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch | |
232 | - 0001-debian-Use-provided-kernel-source-dir.patch | |
233 | - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch | |
234 | - (closes: #659685) | |
235 | * Don't install Python modules for obsolete Python versions | |
236 | - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch | |
237 | ||
238 | -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900 | |
d0a8c2e0 | 239 | |
a206a8c6 JP |
240 | openvswitch (1.4.0-1) unstable; urgency=low |
241 | [ Open vSwitch team ] | |
242 | * New upstream version | |
50bf17cd | 243 | - Compatible with Open vSwitch kernel module included in Linux 3.3. |
a206a8c6 JP |
244 | - New "VLAN splinters" feature to work around buggy device drivers |
245 | in old Linux versions. (This feature is deprecated. When | |
246 | broken device drivers are no longer in widespread use, we will | |
247 | delete this feature.) See ovs-vswitchd.conf.db(5) for more | |
248 | information. | |
249 | - OpenFlow: | |
250 | - Added ability to match on IPv6 flow label through NXM. | |
251 | - Added ability to match on ECN bits in IPv4 and IPv6 through NXM. | |
252 | - Added ability to match on TTL in IPv4 and IPv6 through NXM. | |
253 | - Added ability to modify ECN bits in IPv4. | |
254 | - Added ability to modify TTL in IPv4. | |
255 | - ovs-vswitchd: | |
256 | - Don't require the "normal" action to use mirrors. Traffic will | |
257 | now be properly mirrored for any flows, regardless of their | |
258 | actions. | |
259 | - Track packet and byte statistics sent on mirrors. | |
260 | - ovs-appctl: | |
261 | - New "fdb/flush" command to flush bridge's MAC learning table. | |
262 | - ovs-test: | |
263 | - A new distributed testing tool that allows one to diagnose performance | |
264 | and connectivity issues. This tool currently is not included in RH or | |
265 | Xen packages. | |
266 | - RHEL packaging now supports integration with Red Hat network scripts. | |
699e4abf SH |
267 | - Debian: Depend on python (>= 2.7) | python-argparse instead of |
268 | python-argparse to avoid pulling in python2.6 | |
269 | (closes: #653645) | |
a206a8c6 | 270 | |
ef13dc11 | 271 | -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000 |
a206a8c6 | 272 | |
079a8625 JP |
273 | openvswitch (1.3.0-1) unstable; urgency=low |
274 | [ Open vSwitch team ] | |
275 | * New upstream version | |
276 | - OpenFlow: | |
277 | - Added an OpenFlow extension which allows the "output" action to accept | |
278 | NXM fields. | |
279 | - Added an OpenFlow extension for flexible learning. | |
280 | - Bumped number of NXM registers from four to five. | |
281 | - ovs-appctl: | |
282 | - New "version" command to determine version of running daemon. | |
283 | - If no argument is provided for "cfm/show", displays detailed | |
284 | information about all interfaces with CFM enabled. | |
285 | - If no argument is provided for "lacp/show", displays detailed | |
286 | information about all ports with LACP enabled. | |
287 | - ovs-vswitchd: | |
288 | - The software switch now supports 255 OpenFlow tables, instead | |
289 | of just one. By default, only table 0 is consulted, but the | |
290 | new NXAST_RESUBMIT_TABLE action can look up in additional | |
291 | tables. Tables 128 and above are reserved for use by the | |
292 | switch itself; please use only tables 0 through 127. | |
293 | - Add support for 802.1D spanning tree (STP). | |
294 | - Fragment handling extensions: | |
295 | - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4 | |
296 | fields are made available for matching in fragments with | |
297 | offset 0. | |
298 | - New NXM_NX_IP_FRAG match field for matching IP fragments (usable | |
299 | via "ip_frag" in ovs-ofctl). | |
300 | - New ovs-ofctl "get-frags" and "set-frags" commands to get and set | |
301 | fragment handling policy. | |
302 | - CAPWAP tunneling now supports an extension to transport a 64-key. By | |
303 | default it remains compatible with the old version and other | |
304 | standards-based implementations. | |
305 | - Flow setups are now processed in a round-robin manner across ports | |
306 | to prevent any single client from monopolizing the CPU and conducting | |
307 | a denial of service attack. | |
308 | - Added support for native VLAN tagging. A new "vlan_mode" | |
309 | parameter can be set for "port". Possible values: "access", | |
310 | "trunk", "native-tagged" and "native-untagged". | |
311 | - test-openflowd has been removed. Please use ovs-vswitchd instead. | |
312 | ||
ddc29387 | 313 | -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000 |
079a8625 | 314 | |
5e9c5b61 JP |
315 | openvswitch (1.2.0-1) unstable; urgency=low |
316 | ||
317 | [ Open vSwitch team ] | |
318 | * New upstream version | |
319 | - New "ofproto" abstraction layer to ease porting to hardware | |
320 | switching ASICs. | |
321 | - Packaging for Red Hat Enterprise Linux 5.6 and 6.0. | |
322 | - Datapath support for Linux kernels up to 3.0. | |
323 | - OpenFlow: | |
324 | - New "bundle" and "bundle_load" action extensions. | |
325 | - Database: | |
326 | - Implement table unique constraints. | |
327 | - Support cooperative locking between callers. | |
328 | - ovs-dpctl: | |
329 | - New "-s" option for "show" command prints packet and byte | |
330 | counters for each port. | |
331 | - ovs-ofctl: | |
332 | - New "--readd" option for "replace-flows". | |
333 | - ovs-vsctl: | |
334 | - New "show" command to print an overview of configuration. | |
335 | - New "comment" command to add remark that explains intentions. | |
336 | - ovs-brcompatd has been rewritten to fix long-standing bugs. | |
337 | - ovs-openflowd has been renamed test-openflowd and moved into the | |
338 | tests directory. Its presence confused too many users. Please | |
339 | use ovs-vswitchd instead. | |
340 | - New ovs-benchmark utility to test flow setup performance. | |
341 | - A new log level "off" has been added. Configuring a log facility | |
342 | "off" prevents any messages from being logged to it. Previously, | |
343 | "emer" was effectively "off" because no messages were ever logged at | |
344 | level "emer". Now, errors that cause a process to exit are logged | |
345 | at "emer" level. | |
346 | - "configure" option --with-l26 has been renamed --with-linux, and | |
347 | --with-l26-source has been renamed --with-linux-source. The old | |
348 | names will be removed after the next release, so please update | |
349 | your scripts. | |
350 | - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and | |
351 | datapath/linux-2.6/compat-2.6 directories. | |
352 | - Feature removals: | |
353 | - Dropped support for "tun_id_from_cookie" OpenFlow extension. | |
354 | Please use the extensible match extensions instead. | |
355 | - Removed the Maintenance_Point and Monitor tables in an effort | |
356 | to simplify 802.1ag configuration. | |
357 | - Performance and scalability improvements | |
358 | - Bug fixes | |
359 | ||
360 | -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000 | |
361 | ||
184b5de4 SH |
362 | openvswitch (1.1.1-1) unstable; urgency=low |
363 | ||
364 | [ Open vSwitch team ] | |
365 | * Bug fixes. | |
366 | ||
367 | [ Simon Horman ] | |
368 | * docs: Suppress warning marcro DD not defined | |
369 | (upstream commit 58f870d0) | |
370 | * debian: Make openvswitch depend on Python | |
371 | (upstream commit aa41cb61) | |
372 | * debian: Don't begin openvswitch-pki description with article. | |
373 | (upstream commit bc6bb66) | |
374 | * Debian: Add ${misc:Depends} dependency to python-openvswitch | |
375 | * Debian: Update standards version from 3.9.1 to 3.9.2 | |
376 | * Debian: ${source:Version} dependency on python openvswitch | |
377 | * Debian: ${source:Version} dependency for python openvswitch | |
378 | * Switch to dpkg-source 3.0 (quilt) format | |
379 | - For local non-debian/ patches (above) | |
380 | ||
381 | -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900 | |
382 | ||
d4da3acc JP |
383 | openvswitch (1.1.0-1) unstable; urgency=low |
384 | ||
184b5de4 | 385 | [ Open vSwitch team ] |
d4da3acc JP |
386 | * New upstream version |
387 | - Ability to define policies over IPv6 | |
388 | - LACP | |
389 | - 802.1ag CCM | |
390 | - Support for extensible match extensions to OpenFlow | |
391 | - QoS: | |
392 | - Support for HFSC qdisc. | |
393 | - Queue used by in-band control can now be configured. | |
394 | - Kernel: | |
395 | - Kernel<->userspace interface has been reworked and should be | |
396 | close to a stable ABI now. | |
397 | - "Port group" concept has been dropped. | |
398 | - GRE over IPSEC tunnels | |
399 | - Bonding: | |
400 | - New active backup bonding mode. | |
401 | - New L4 hashing support when LACP is enabled. | |
402 | - Source MAC hash now includes VLAN field also. | |
403 | - miimon support. | |
404 | - Greatly improved handling of large flow tables | |
405 | - ovs-dpctl: | |
406 | - "show" command now prints full vport configuration. | |
407 | - "dump-groups" command removed since kernel support for | |
408 | port groups was dropped. | |
409 | - ovs-vsctl: | |
410 | - New commands for working with the new Managers table. | |
411 | - "list" command enhanced with new formatting options and --columns | |
412 | option. | |
413 | - "get" command now accepts new --id option. | |
414 | - New "find" command. | |
415 | - ovs-ofctl: | |
416 | - New "queue-stats" command for printing queue stats. | |
417 | - New commands "replace-flows" and "diff-flows". | |
418 | - Commands to add and remove flows can now read from files. | |
419 | - New --flow-format option to enable or disable NXM. | |
420 | - New --more option to increase OpenFlow message verbosity. | |
421 | - Removed "tun-cookie" command, which is no longer useful. | |
422 | - ovs-controller enhancements for testing various features. | |
423 | - New ovs-vlan-test command for testing for Linux kernel driver VLAN | |
424 | bugs. New ovs-vlan-bug-workaround command for enabling and | |
425 | disabling a workaround for these driver bugs. | |
426 | - OpenFlow support: | |
427 | - "Resubmit" actions now update flow statistics. | |
428 | - New "register" extension for use in matching and actions, via NXM. | |
429 | - New "multipath" experimental action extension. | |
430 | - New support for matching multicast Ethernet frames, via NXM. | |
431 | - New extension for OpenFlow vendor error codes. | |
432 | - New extension to set the QoS output queue without actually | |
433 | sending to an output port. | |
434 | - Open vSwitch now reports a single flow table, instead of | |
435 | separate hash and wildcard tables. This better models the | |
436 | current implementation. | |
437 | - New experimental "note" action. | |
438 | - New "ofproto/trace" ovs-appctl command and associated utilities | |
439 | to ease debugging complex flow tables. | |
440 | - Database: | |
441 | - Schema documentation now includes an entity-relationship diagram. | |
442 | - The database is now garbage collected. In most tables, | |
443 | unreferenced rows will be deleted automatically. | |
444 | - Many tables now include statistics updated periodically by | |
445 | ovs-vswitchd or ovsdb-server. | |
446 | - Every table now has an "external-ids" column for use by OVS | |
447 | integrators. | |
448 | - There is no default controller anymore. Each bridge must have its | |
449 | controller individually specified. | |
450 | - The "fail-mode" is now a property of a Bridge instead of a Controller. | |
451 | - New versioning and checksum features. | |
452 | - New Managers table and manager_options column in Open_vSwitch table | |
453 | for specifying managers. The old "managers" column in the | |
454 | Open_vSwitch table has been removed. | |
455 | - Many "name" columns are now immutable. | |
456 | - Feature removals: | |
457 | - Dropped support for XenServer pre-5.6.100. | |
458 | - Dropped support for Linux pre-2.6.18. | |
459 | - Dropped controller discovery support. | |
460 | - Dropped "ovs-ofctl status" and the OpenFlow extension that it used. | |
461 | Statistics reporting in the database is a rough equivalent. | |
462 | - Dropped the "corekeeper" package (now separate, at | |
463 | http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper). | |
464 | - Performance and scalability improvements | |
465 | - Bug fixes | |
466 | ||
184b5de4 SH |
467 | [ Simon Horman ] |
468 | * Add the following fixes from upstream branch-1.1 | |
469 | - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in | |
470 | dpif_linux_is_internal_device(). | |
471 | - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel | |
472 | module. | |
473 | - 002d4a3 vswitch: Improve schema documentation. | |
474 | - 58bd294 cfm: Fix broken fault logic. | |
475 | - c042664 bridge: Run once before configuring CFM. | |
476 | * Switch to dpkg-source 3.0 (quilt) format | |
477 | ||
478 | -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900 | |
d4da3acc | 479 | |
6e11a6a1 SH |
480 | openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low |
481 | ||
482 | * Git snapshot, including | |
483 | - tests: Fix Y2011 bug in testsuite | |
484 | (closes: #609506) | |
485 | ||
486 | -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900 | |
487 | ||
a0d8d697 | 488 | openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low |
d5905136 | 489 | |
a0d8d697 | 490 | * Git snaptshot |
d5905136 | 491 | |
a0d8d697 | 492 | -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900 |
d5905136 | 493 | |
a0d8d697 | 494 | openvswitch (1.1.0~pre2-5) unstable; urgency=low |
476d56f5 | 495 | |
a0d8d697 SH |
496 | * Open vSwitch only works on Linux so set |
497 | the Architecture of binary packages to linux-any accordingly | |
498 | ||
499 | -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900 | |
500 | ||
501 | openvswitch (1.1.0~pre2-4) unstable; urgency=low | |
502 | ||
503 | * Add procps to Build-Depends | |
504 | (closes: #602891) | |
505 | ||
506 | -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900 | |
507 | ||
508 | openvswitch (1.1.0~pre2-3) unstable; urgency=low | |
509 | ||
510 | * Remove the corekeeper package as it isn't strongly related | |
511 | to Open vSwitch. It has subsequently been broken off into | |
512 | a separate source repository and may be uploaded as its | |
513 | own debian source package. | |
514 | http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary | |
515 | (closes: #602946) | |
516 | * Avoid the use of long socket names. | |
517 | (closes: #602891, closes: #602911) | |
518 | ||
519 | -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900 | |
520 | ||
521 | openvswitch (1.1.0~pre2-2) unstable; urgency=low | |
522 | ||
523 | * Clarify licensing of files in xenserver/ | |
524 | ||
525 | -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900 | |
526 | ||
527 | openvswitch (1.1.0~pre2-1) unstable; urgency=low | |
528 | ||
529 | * New upstream version | |
530 | - Bug fixes | |
531 | ||
532 | -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900 | |
533 | ||
534 | openvswitch (1.1.0~pre1-1) unstable; urgency=low | |
535 | ||
536 | * New upstream version | |
537 | - OpenFlow 1.0 slicing (QoS) functionality | |
538 | - Python bindings for configuration database (no write support) | |
539 | - Performance and scalability improvements | |
540 | - Bug fixes | |
476d56f5 JP |
541 | |
542 | -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000 | |
543 | ||
a0d8d697 | 544 | openvswitch (1.0.1-1) unstable; urgency=low |
064af421 | 545 | |
8b75073b | 546 | * New upstream version. |
064af421 | 547 | |
8b75073b | 548 | -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000 |