[pve-container.git] / debian / changelog

pve-container (3.3-4) pve; urgency=medium

  * fix #3176: allow development Devuan versions, improve version detection

  * fix restore of containers with 'devuan' as ostype

 -- Proxmox Support Team <support@proxmox.com>  Wed, 17 Feb 2021 08:59:25 +0100

pve-container (3.3-3) pve; urgency=medium

  * make formatting image with ext4 less noisy

  * api: destroy: add 'destroy-unreferenced-disks' parameter

  * use monitor commands to freeze on pure-v2 setups

  * restore: add more informational messages

  * fix #3275: remove old FW config when restoring

 -- Proxmox Support Team <support@proxmox.com>  Thu, 28 Jan 2021 17:12:35 +0100

pve-container (3.3-2) pve; urgency=medium

  * improve restoring PBS archive: avoid missing restore of firewall config

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Dec 2020 12:49:29 +0100

pve-container (3.3-1) pve; urgency=medium

  * d/rules: do not try to start or enable system-pve\x2dcontainer.slice on
    update

  * CGroups: re-use factored-out PVE::CGroup module as base

  * deactivate volumes after storage migrate

  * vzdump: allow relative exclude patterns for snapshot and stop mode, to make
    the behavior consistent across all backup modes

  * vzdump: pass along exclude patterns to proxmox-backup-client

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Nov 2020 13:51:03 +0100

pve-container (3.2-4) pve; urgency=medium

  * fix #3161: snapshot creation: only check volumes for fsfreeze

  * setup: Devuan: add support for stable Beowulf and testing Chimaera

 -- Proxmox Support Team <support@proxmox.com>  Mon, 23 Nov 2020 19:47:44 +0100

pve-container (3.2-3) pve; urgency=medium

  * improve numbering scheme detection for CentOS Stream releases

  * pct fstrim: add 'ignore-mountpoints' parameter

  * add support for Fedora 33

  * add support for Ubuntu 20.10 Groovy Gorilla

  * fix #2991, #2528: snapshot creation: fsfreeze mountpoints, if underlying FS
    requires it

 -- Proxmox Support Team <support@proxmox.com>  Mon, 16 Nov 2020 16:41:00 +0100

pve-container (3.2-2) pve; urgency=medium

  * fix #2938: increase limit of max cores from 128 to 8192

  * fix #3016: clone: do not copy snapshot config

  * skip additional virtual filesystems when sycing a containers namespace

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Sep 2020 10:54:10 +0200

pve-container (3.2-1) pve; urgency=medium

  * improve feedback for failed Container startup

  * allow one to enable debug level logging to the start task log

  * setup: add kali-rolling as supported release

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Sep 2020 21:21:15 +0200

pve-container (3.1-13) pve; urgency=medium

  * do the activation of storage volumes outside of the containers mount
    namespace to avoid issues when it's required to activate the underlying
    storage

  * fix passing the offline storage migration bandwidth limit

  * fix #2790: volume resize: fix API behavior in the case where the disk
    volume has already the exact size requested

  * allow one to configure up to 32 network interfaces

 -- Proxmox Support Team <support@proxmox.com>  Thu, 27 Aug 2020 12:48:18 +0200

pve-container (3.1-12) pve; urgency=medium

  * backup: reduce verbosity of logging when syncing filesystems in snapshot
    mode

 -- Proxmox Support Team <support@proxmox.com>  Fri, 24 Jul 2020 11:42:23 +0200

pve-container (3.1-11) pve; urgency=medium

  * fix #2820: don't hotplug over existing mpX

  * setup/debian: use CIDR for Debian Buster and newer

  * vzdump: set heuristic task size information for Proxmox Backup Server
    target storage

  * cgroup: get old swap value when hotplugging only memory

 -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Jul 2020 13:32:55 +0200

pve-container (3.1-10) pve; urgency=medium

  * improve snapshot mode backups with a Proxmox Backup Server as target

 -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Jul 2020 18:12:11 +0200

pve-container (3.1-9) pve; urgency=medium

  * fix #2778: use vm_start instead of systemctl to start/restart
    container

  * add helper to get reason for mounpoint backup exclusion

  * fix #1423: add timezone config option

 -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Jul 2020 13:55:45 +0200

pve-container (3.1-8) pve; urgency=medium

  * lxc: fall back to unmanaged when no OS detected and no /etc/os-
    release file found

  * adapt network create hook to new pve-network version, if installed

 -- Proxmox Support Team <support@proxmox.com>  Mon, 08 Jun 2020 17:39:27 +0200

pve-container (3.1-7) pve; urgency=medium

  * fix #2655: setup securetty during template fixup also for centos version
     7 and newer

 -- Proxmox Support Team <support@proxmox.com>  Thu, 28 May 2020 15:29:13 +0200

pve-container (3.1-6) pve; urgency=medium

  * avoid using LXC CLI tools for CT freeze/unfreeze and improve support for
    both cgroups v1 and v2 freezer

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 May 2020 16:21:19 +0200

pve-container (3.1-5) pve; urgency=medium

  * fix: #2124 add zstd

  * create_vm: avoid premature write_config caused by update_pct_config

  * api/destroy: repeat early checks after locking

  * vzdump: use new pbs option

 -- Proxmox Support Team <support@proxmox.com>  Tue, 5 May 2020 11:23:42 +0200

pve-container (3.1-3) pve; urgency=medium

  * add 'force' to destroy-vm to allow destroying running containers

  * whitelist lxc.cgroup2.* raw keys

  * consider lxc.cgroup2.cpuset.cpus as an explicit cpuset to not try to
    override it with a cgroupv1 entry

  * support cpuset cgroupv2 controller for writing lxc configs

  * improve cgroup controller version discovery

 -- Proxmox Support Team <support@proxmox.com>  Wed, 29 Apr 2020 11:22:13 +0200

pve-container (3.1-2) pve; urgency=medium

  * Use foreach_volume instead of foreach_mountpoint-variants

  * Use parse_volume instead of parse_ct-variants

  * Use new storage_migrate interface

 -- Proxmox Support Team <support@proxmox.com>  Thu, 9 Apr 2020 08:50:54 +0200

pve-container (3.1-1) pve; urgency=medium

  * rework cgroup handling for initial cgroupv2 support

  * add required configuration changes for lxc-4.0 with now-upstream container
    cgroup isolation

 -- Proxmox Support Team <support@proxmox.com>  Mon, 06 Apr 2020 14:14:50 +0200

pve-container (3.0-24) pve; urgency=medium

  * For clone+copy features, make sure a valid format for the target is supported

  * Rely on template_create to check whether creating a template is possible

  * fix #1904: convert to base image when moving a volume of a template

  * move_volume: if deleting old volume fails, add it as unused

  * VZDump: mark template disks as ro

  * Implement volume-related helpers and use new foreach_volume

 -- Proxmox Support Team <support@proxmox.com>  Mon, 30 Mar 2020 09:35:57 +0200

pve-container (3.0-23) pve; urgency=medium

  * lxc_config: mount /sys as mixed for unprivileged by default to avoid
    issues with recent systemd versions running inside the container

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Mar 2020 19:02:48 +0100

pve-container (3.0-22) pve; urgency=medium

  * Fix mounting ZFS snapshots whose dataset is not mounted below '/'

  * fix #2580: api/delete: drop CT from HA resources if purge is set

  * setup: warn on unknown os-release ID

  * allow restoring non-volume backups again

 -- Proxmox Support Team <support@proxmox.com>  Mon, 16 Mar 2020 09:09:45 +0100

pve-container (3.0-21) pve; urgency=medium

  * fix #2611: use correct operation in get_bandwidth_limit for migration limit

  * setup/ubuntu: add upcoming 20.04 focal release

  * vzdump: add support for proxmox backup server

 -- Proxmox Support Team <support@proxmox.com>  Tue, 03 Mar 2020 12:00:48 +0100

pve-container (3.0-20) pve; urgency=medium

  * add mknod feature flag

  * set lxc.seccomp.notify.cookie to the vmid

  * llow reading snapshot config for VM.Audit

  * fix #2598: activate volumes before mounting in stop mode backup

  * apply pending: do cleanup pending between, not during, change/delete loop

 -- Proxmox Support Team <support@proxmox.com>  Thu, 20 Feb 2020 13:59:00 +0100

pve-container (3.0-19) pve; urgency=medium

  * fix fsck command for ceph RBD backed volumes, map and unmap them

  * fix #2560: adapt some sysctl values for high CT counts

  * fix #2568: hotplug: fix typo for 'cpu.shares'

  * setup: allow all Centos 8.x stable versions

 -- Proxmox Support Team <support@proxmox.com>  Mon, 27 Jan 2020 18:53:00 +0100

pve-container (3.0-18) pve; urgency=medium

  * undo the display change from 3.0-17 for now

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Jan 2020 09:29:23 +0100

pve-container (3.0-17) pve; urgency=medium

  * enable centos 8.1 containers

  * more consistent display of unnamed containers (add a space between 'CT'
    and the number)

 -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Jan 2020 08:44:38 +0100

pve-container (3.0-16) pve; urgency=medium

  * replace the deprecated DHCP=none with DHCP=no in .network units on systemd
    based containers

  * fix an issue where when debugging container startup running them directly
    via `lxc-start` instead of `pct start`, the prestart hook would mount
    containers relative to the current working directory instead of where
    they're supposed to be mounted

 -- Proxmox Support Team <support@proxmox.com>  Thu, 02 Jan 2020 09:37:08 +0100

pve-container (3.0-15) pve; urgency=medium

  * fix #2512: post-stop: unmount stage mps before cleanup

  * post-stop-hook: unmount before deactivating storages

 -- Proxmox Support Team <support@proxmox.com>  Mon, 16 Dec 2019 16:04:39 +0100

pve-container (3.0-14) pve; urgency=medium

  * fix bindmounting with staged mount points

 -- Proxmox Support Team <support@proxmox.com>  Tue, 26 Nov 2019 18:27:41 +0100

pve-container (3.0-13) pve; urgency=medium

  * move applying pending changes from pre-start to post-stop, as we can
    regenerate the LXC config safely there.

 -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Nov 2019 09:52:53 +0100

pve-container (3.0-12) pve; urgency=medium

  * implement CT mountpoint hotplugging, for host running 5.3 or newer Linux
    kernel

  * implement container reboot over API and CLI

  * add 'tags' config option for adding meta information to CT

 -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Nov 2019 19:27:34 +0100

pve-container (3.0-11) pve; urgency=medium

  * add PVE::LXC::Tools

  * change hooks to use new helper

  * config: whitelist lxc.hook.version

  * fix #2453: actually reflect random MAC address selection in config

  * fix #2456 setting bind-mount through API/CLI is broken

  * improve test reliability in absence of running pmxcfs

  * follow refactoring in pve-cluster

 -- Proxmox Support Team <support@proxmox.com>  Mon, 18 Nov 2019 12:08:15 +0100

pve-container (3.0-10) pve; urgency=medium

  * support Fedora 31 as Container distribution

  * minor adaptions of pending changed related code

  * setup: move host architecture translation from pve-common to container

 -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Oct 2019 07:32:43 +0100

pve-container (3.0-8) pve; urgency=medium

  * fix issue where TTYs aren't correctly set after restore

  * ensure that lxc.* entries are restored only once

  * add Ubuntu 19.10 Eoan as supported

  * fix #2412: ct destroy: only delete config after deleted from pools and
    Firewall

  * implement basic pending changes for running containers

  * fix #1291: add purge option for destroy vm api call, allows one to remove
    any reference of this CT from backup and replication jobs.

  * add check to resize disk if current size could not be determined

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Oct 2019 22:04:12 +0200

pve-container (3.0-7) pve; urgency=medium

  * mountpoints: create parent dirs with correct owner

  * setup: allow CentOS 5 and CentOS 8

  * do not leave fstrim lock if initial mount-all-volumes procedure
    fails

 -- Proxmox Support Team <support@proxmox.com>  Tue, 03 Sep 2019 07:21:18 +0200

pve-container (3.0-5) pve; urgency=medium

  * vzdump: always add (empty) firewall config and improve handling of
    restoring it from archive

 -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Jul 2019 12:34:32 +0200

pve-container (3.0-4) pve; urgency=medium

  * setup CT getty: ensure the getty.target is not masked and improve the logic
    which ensures that only the correct getty services are enabled

  * fix #1042: inotify: increase watches, instances & queue default
    limits

  * remove obsolete lxc@.service.d

  * config: whitelist lxc.seccomp.notify.proxy/cookie

  * add support for debian bullseye/sid

 -- Proxmox Support Team <support@proxmox.com>  Fri, 19 Jul 2019 16:03:22 +0200

pve-container (3.0-3) pve; urgency=medium

  * fix #1451: allow one to add mount options to CT mountpoints

  * fix #2270: allow custom lxc options to be restored as root

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Jul 2019 19:25:12 +0200

pve-container (3.0-2) pve; urgency=medium

  * Fix #576: Fix dangling files for Move Disk

  * restore_archive: check if compression_map format is undefined

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Jun 2019 18:37:35 +0200

pve-container (3.0-1) pve; urgency=medium

  * Bump version for Debian Buster / PVE 6.0

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 May 2019 12:41:01 +0200

pve-container (2.0-39) unstable; urgency=medium

  * fix #2027: do not disable IPV6_AUTOCONF on centos

  * fix #2200: vm_stop: add nokill-after-timeout parameter

 -- Proxmox Support Team <support@proxmox.com>  Wed, 15 May 2019 16:37:58 +0200

pve-container (2.0-38) unstable; urgency=medium

  * fix: #1075: Correctly restore CT templates form backup

  * raise supported fedora version to 30

 -- Proxmox Support Team <support@proxmox.com>  Tue, 07 May 2019 11:11:57 +0000

pve-container (2.0-37) unstable; urgency=medium

  * setup: fix alpine ipv6-slaac configuration

  * add lock information to CT status call

  * fix #1607: implement pct fstrim

  * fix #2147: re-add support for current opensuse tumbleweed

  * fix: #1218 Add flag 'unique' to pct restore in order to set new MAC
    addresses to NICs

  * storage migrate: add bwlimit parameter

 -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Apr 2019 16:24:33 +0200

pve-container (2.0-36) unstable; urgency=medium

  * Fix #2109: map volumes explicitly if resizing a stopped container

  * config: hwaddr: enforce unicast MAC addresses

  * setup: add initial support for Ubuntu 19.04 Disco Dingo

 -- Proxmox Support Team <support@proxmox.com>  Tue, 19 Mar 2019 12:37:34 +0100

pve-container (2.0-35) unstable; urgency=medium

  * fix #2080: fix device encoding in the prestart hook

  * fix #2086: change process checking mechanism in vmstatus

  * fix #2104: config "features: mount" regex pattern

  * fix #1891: Add zsh command completion generation for pct

  * fix #2117: don't keep custom idmap in pct pipe restore

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 Mar 2019 08:11:24 +0100

pve-container (2.0-34) unstable; urgency=medium

  * fix #889: api create: reserver config with create lock early

  * fix #1924: add snapshot parameter

  * add pre- start/stop hookscript

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Feb 2019 13:12:10 +0100

pve-container (2.0-33) unstable; urgency=medium

  * whitelist namespaced lxc.sysctl.* entries

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Jan 2019 15:36:18 +0100

pve-container (2.0-32) unstable; urgency=medium

  * fix #2014: don't check if unpriv for blkio

  * fix #2028: keep custom uid mapping during restore

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Jan 2019 13:45:47 +0100

pve-container (2.0-31) unstable; urgency=medium

  * fix #1234: pct: implement rescan

  * allow using 'fuse' file systems in a container thorugh a new feature flag

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Nov 2018 12:54:20 +0100

pve-container (2.0-30) unstable; urgency=medium

  * fix #1808: readonly mount source disk

  * support Fedora 29

  * call map_volume before using volumes

 -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Nov 2018 17:33:43 +0100

pve-container (2.0-29) unstable; urgency=medium

  * add Ubuntu 18.10 (Cosmic Cuttlefish) support

  * close #1940: pct console: added ability to specify escape sequence

 -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Oct 2018 10:24:35 +0200

pve-container (2.0-28) unstable; urgency=medium

  * configure IPv6AcceptRA in systemd-networkd files

  * enable emulation of containers using qemu-user-static

  * add feature flags (for now: mount, nesting, keyctl) using apparmor
    profile generation

 -- Proxmox Support Team <support@proxmox.com>  Wed, 03 Oct 2018 16:45:56 +0200

pve-container (2.0-27) unstable; urgency=medium

  * fix #1885: delete old route when changing gateway

  * fix #1874: autodev hook: setup devices cgroup

  * fix #1897: bump MAX_MOUNT_POINTS to 256

  * config: add missing lock types to schema

 -- Proxmox Support Team <support@proxmox.com>  Thu, 13 Sep 2018 11:19:19 +0200

pve-container (2.0-26) unstable; urgency=medium

  * fix #1851: check 'replicate' flag for non-volume mountpoints

  * document more API return properties

  * use SHA-512 for container passwords

  * add support for openSUSE Leap 15.0

  * add fqdn to /etc/hosts even with no ip

 -- Proxmox Support Team <support@proxmox.com>  Thu, 23 Aug 2018 13:56:46 +0200

pve-container (2.0-25) unstable; urgency=medium

  * deal with disabled cgroup subsystems

  * use systemd-networkd for newer Fedora containers

  * fix #1844: check /etc/.pve-ignore.hosts early

 -- Proxmox Support Team <support@proxmox.com>  Mon, 30 Jul 2018 09:19:42 +0200

pve-container (2.0-24) unstable; urgency=medium

  * correctly handle extra mounpoints when creating a template

  * fix #1786: check for shared storage on clone

  * fix #1792: Do not assign vars in conditional statement

  * fix #1778: check if storage support templates

  * api create: allow auto start of container after create finished

 -- Proxmox Support Team <support@proxmox.com>  Wed, 27 Jun 2018 09:10:35 +0200

pve-container (2.0-23) unstable; urgency=medium

  * rescan volume size when attaching unused volume

  * support Fedora 28

  * fix #1721: unmount containers before trying to mount them

  * rescan volume zie when copying volume

  * add cifs as allowed storage type

 -- Proxmox Support Team <support@proxmox.com>  Mon, 14 May 2018 11:09:39 +0200

pve-container (2.0-22) unstable; urgency=medium

  * add Ubuntu 18.04 to known versions

 -- Proxmox Support Team <support@proxmox.com>  Mon, 23 Apr 2018 11:04:59 +0200

pve-container (2.0-21) unstable; urgency=medium

  * create: fix passing of template file descriptor

  * restore: support i/o rate limiting

  * fix #1704: get container uptime with /proc/<pid>/stat

  * fix skiplock for pct start

  * clone: randomize network MAC HW address of clone

  * clone: implement target parameter

  * implement full clone

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Mar 2018 09:14:19 +0100

pve-container (2.0-20) unstable; urgency=medium

  * Fix #1547: on migration abort, the CT starts again

  * seperate serachdomain and nameserver config

 -- Proxmox Support Team <support@proxmox.com>  Mon, 12 Mar 2018 13:24:08 +0100

pve-container (2.0-19) unstable; urgency=medium

  * close #1668: add Devuan support

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Feb 2018 06:12:06 +0100

pve-container (2.0-18) unstable; urgency=medium

  * add termproxy api call

  * setup/fedora: we support fedora release 27

  * pct mount: tell user where they can find the mounted files

  * vzdump: fix visibility of warning about lack of xattr/acl support on nfs

  * use systemd-networkd for ubuntu >= 17.10

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Dec 2017 14:57:46 +0100

pve-container (2.0-17) unstable; urgency=medium

  * migrate: skip replication handling if not replicated

  * migrate: only restart if conf was moved

  * add vm_stop helper

  * switch to pve-container@ unit

  * fixes #1227: include ns/ dir in read_cgroup_value

  * VM.Snapshot.Rollback privilege added

 -- Proxmox Support Team <support@proxmox.com>  Tue, 17 Oct 2017 15:11:19 +0200

pve-container (2.0-16) unstable; urgency=medium

  * fix #1253: show ssh key fingerprints again

  * fix #1464: setup/suse: support SLES 12 container

  * close #1478: add check for unsupported config

  * config: update for lxc-2.1

  * API/clone: do not overwrite global signal handlers

  * setup/fedora: use os_release and support 26

  * fix os-release mapping for similar flavoured distros

  * setup: recognize 'sles' os_release ID

  * setup/suse: support tumbleweed container

  * setup/suse: check early if setting up the ct getty service is needed

  * setup/suse: use new os_release_var to simplify version detection

  * use /etc/os-release

  * setup: add a additional mapping for archlinux

 -- Proxmox Support Team <support@proxmox.com>  Tue, 12 Sep 2017 13:48:50 +0200

pve-container (2.0-15) unstable; urgency=medium

  * support debian 9.1

  * recognize debian buster/sid

  * recognize ubuntu 17.10

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Jul 2017 09:17:03 +0200

pve-container (2.0-14) unstable; urgency=medium

  * allow disks on shared storages on replicated VMs

  * refuse to add non-replicatable disks to replicating VMs

  * API HA tasks: we request states not execute them

  * use COMMON_TAR_FLAGS from pve-storage

  * create: open templates as real root

  * remove unused next_free_nbd_dev function

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Jun 2017 12:50:37 +0200

pve-container (2.0-13) unstable; urgency=medium

  * migrate: pass the with_snapshots parameter

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Jun 2017 12:56:02 +0200

pve-container (2.0-12) unstable; urgency=medium

  * PVE::LXC::Migrate - use replication job, transfer replication state

  * get_replicatable_volumes: add additional tests

  * src/PVE/API2/LXC.pm: aquire guest_migration_lock inside worker

  * Add a migration lock to avoid a replication on rollback-time

  * PVE::LXC::Config - implement $cleanup flag for get_replicatable_volumes

  * migrate: implement insecure storage migration

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Jun 2017 09:10:56 +0200

pve-container (2.0-11) unstable; urgency=medium

  * support width and height parameter for vncproxy

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Jun 2017 09:16:11 +0200

pve-container (2.0-10) unstable; urgency=medium

  * migrate: aquire guest_migration_lock during

  * use new PVE::ReplicationConfig

  * do not allow destroy if there are replication jobs

  * use Syscall module instead of raw syscall numbers

  * migrate: pass ssh_info to storage_migrate

  * tests: fix broken snapshot delete tests

 -- Proxmox Support Team <support@proxmox.com>  Wed, 31 May 2017 09:31:14 +0200

pve-container (2.0-9) unstable; urgency=medium

  * correctly handle passwords with utf8 wide characters

 -- Proxmox Support Team <support@proxmox.com>  Tue, 02 May 2017 11:50:10 +0200

pve-container (2.0-8) unstable; urgency=medium

  * add support for Ubuntu 17.04 (zesty)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 02 May 2017 07:00:13 +0200

pve-container (2.0-7) unstable; urgency=medium

  * whitelisted lxc.limit.* config entries usable with the next lxc release

  * added storage replication settings

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Apr 2017 13:59:28 +0200

pve-container (2.0-6) unstable; urgency=medium

  * support opensuse >= 42

 -- Proxmox Support Team <support@proxmox.com>  Thu, 06 Apr 2017 06:28:07 +0200

pve-container (2.0-4) unstable; urgency=medium

  * add console fix for debian containers using systemd

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Mar 2017 12:57:05 +0100

pve-container (2.0-3) unstable; urgency=medium

  * don't try to create the deprecated rsa1 ssh keys

 -- Proxmox Support Team <support@proxmox.com>  Tue, 14 Mar 2017 09:27:22 +0100

pve-container (2.0-2) unstable; urgency=medium

  * improved reboot container fix

 -- Proxmox Support Team <support@proxmox.com>  Fri, 10 Mar 2017 13:50:21 +0100

pve-container (2.0-1) unstable; urgency=medium

  * rebuild for PVE 5.0 / Debian Stretch

 -- Proxmox Support Team <support@proxmox.com>  Thu, 9 Mar 2017 15:27:11 +0100

pve-container (1.0-95) unstable; urgency=medium

  * correctly handle reboots within containers

  * improve locale handling in vnc console

  * fix architecture detection in restore_archive

 -- Proxmox Support Team <support@proxmox.com>  Thu, 9 Mar 2017 15:19:33 +0100

pve-container (1.0-94) unstable; urgency=medium

  * fix #1153: improve behavior when entering unicode in passwords prompts

  * use the lxc@.service unit to start containers to avoid issues with
    pvedaemon restarts.

 -- Proxmox Support Team <support@proxmox.com>  Thu, 02 Feb 2017 14:13:10 +0100

pve-container (1.0-93) unstable; urgency=medium

  * add dependency on libpve-guest-common-perl

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 Jan 2017 09:40:19 +0100

pve-container (1.0-92) unstable; urgency=medium

  * use new PVE::Storage::check_volume_access()

  * fix #1253: display SSH fingerprints on CT setup

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Jan 2017 09:17:56 +0100

pve-container (1.0-91) unstable; urgency=medium

  * add setup_environment hook to CLIHandler class

 -- Proxmox Support Team <support@proxmox.com>  Thu, 12 Jan 2017 13:21:24 +0100

pve-container (1.0-90) unstable; urgency=medium

  * skip unprivileged config parameter when restoring a container (revert
    previos patch)

 -- Proxmox Support Team <support@proxmox.com>  Tue, 27 Dec 2016 09:02:41 +0100

pve-container (1.0-89) unstable; urgency=medium

  * supress warning when we try to delete a non-existent option

  * fix #1226: show the right amount of memory usage

  * fix #1225: restore without config changes for VMUser

  * document bind/device mp permissions better

 -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Dec 2016 11:56:17 +0100

pve-container (1.0-88) unstable; urgency=medium

  * setup: allow fedora 22-25

  * setup: more general approach to tty paths

 -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Dec 2016 10:13:12 +0100

pve-container (1.0-87) unstable; urgency=medium

  * implement lxc restart migration

  * VZDump: implement stopwait

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Dec 2016 12:12:26 +0100

pve-container (1.0-86) unstable; urgency=medium

  * Do not skip unprivileged config parameter when restoring a container

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Dec 2016 07:39:07 +0100

pve-container (1.0-85) unstable; urgency=medium

  * start: don't fail if no lxc cpuset cgroup exists yet

 -- Proxmox Support Team <support@proxmox.com>  Fri, 25 Nov 2016 11:39:50 +0100

pve-container (1.0-84) unstable; urgency=medium

  * start: use a random cpuset at startup

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Nov 2016 15:51:20 +0100

pve-container (1.0-83) unstable; urgency=medium

  * vm_shutdown: request 'stopped' state for HA enabled CTs

  * switch to 'ha-manager set'

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Nov 2016 08:28:04 +0100

pve-container (1.0-82) unstable; urgency=medium

  * fix spelling: 'mountpoint' 'mount point'

  * fix #1147: allow marking non-volume mps as shared

  * Ubuntu 16.10: fix systemd console files

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Nov 2016 16:50:34 +0100

pve-container (1.0-81) unstable; urgency=medium

  * add support for Ubuntu 16.10

 -- Proxmox Support Team <support@proxmox.com>  Wed, 02 Nov 2016 08:43:29 +0100

pve-container (1.0-80) unstable; urgency=medium

  * pct: add new command 'pct cpusets' to print assigned cpu sets

 -- Proxmox Support Team <support@proxmox.com>  Sat, 29 Oct 2016 07:46:40 +0200

pve-container (1.0-79) unstable; urgency=medium

  * PVE::LXC::Config::has_lxc_entry() new helper

  * vmstatus: fix memory usage value including cache sizes

  * fix devices file check in autodev hook

  * add new option 'cores' to restrict visible cores

 -- Proxmox Support Team <support@proxmox.com>  Wed, 26 Oct 2016 11:46:49 +0200

pve-container (1.0-78) unstable; urgency=medium

  * alpine: fix getty line removal

  * tests: add missing loopback interfaces

 -- Proxmox Support Team <support@proxmox.com>  Fri, 07 Oct 2016 09:35:34 +0200

pve-container (1.0-77) unstable; urgency=medium

  * fix #1134: debian: don't start empty interface sections

 -- Proxmox Support Team <support@proxmox.com>  Tue, 04 Oct 2016 11:49:48 +0200

pve-container (1.0-76) unstable; urgency=medium

  * bug #1021: add loopback interface if not network config

  * fix config path in warning about undetectable architecture

 -- Proxmox Support Team <support@proxmox.com>  Tue, 04 Oct 2016 11:39:42 +0200

pve-container (1.0-75) unstable; urgency=medium

  * restore: fix simple with non-volume mps

  * restore: add permission check, only restore lxc.* if root

 -- Proxmox Support Team <support@proxmox.com>  Tue, 20 Sep 2016 14:14:06 +0200

pve-container (1.0-74) unstable; urgency=medium

  * correctly set unlimited cpulimit at runtime

  * use integer values for minimum and maximum (json schema cleanup)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Sep 2016 07:44:29 +0200

pve-container (1.0-73) unstable; urgency=medium

  * fix #1078: accept arch parameter

 -- Proxmox Support Team <support@proxmox.com>  Fri, 12 Aug 2016 07:26:30 +0200

pve-container (1.0-72) unstable; urgency=medium

  * Fix #1070: vzdump: handle sparse files in suspend mode

  * don't let lxc handle container reboots directly

  * update_lxc_config: sort network devices for consistency

  * update_lxc_config: remove unused parameter

  * ArchLinux: don't use the lxc/ subdir for ttys

  * add status call to pct

  * allow deleting of container hostname

  * pass datacenter.cfg's mac_prefix to random_ether_addr

 -- Proxmox Support Team <support@proxmox.com>  Fri, 05 Aug 2016 13:14:32 +0200

pve-container (1.0-71) unstable; urgency=medium

  * fix a possible undefined value error

  * provide a better error message for rbd without krbd

  * improve migration output concerning local volumes

  * include custom lxc options when displaying config

  * fix #1046: add non-snapshotted disks as unused

  * added 'pct df'

 -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Jul 2016 12:35:03 +0200

pve-container (1.0-70) unstable; urgency=medium

  * fix #146: add name to backup log

 -- Proxmox Support Team <support@proxmox.com>  Tue, 28 Jun 2016 08:26:23 +0200

pve-container (1.0-69) unstable; urgency=medium

  * migration: add checks from QemuMigrate

 -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Jun 2016 06:38:22 +0200

pve-container (1.0-68) unstable; urgency=medium

  * docs: update mountpoint descriptions

 -- Proxmox Support Team <support@proxmox.com>  Tue, 07 Jun 2016 11:33:18 +0200

pve-container (1.0-67) unstable; urgency=medium

  * restore: use empty config to reserve container ID

  * split up create_rootfs and restore_and_configure

  * ignore ro flag when creating/restoring CT

  * bindmount: catch rw/ro race and add tests

  * add bindmount regression tests

 -- Proxmox Support Team <support@proxmox.com>  Fri, 03 Jun 2016 10:33:41 +0200

pve-container (1.0-66) unstable; urgency=medium

  * Setup: add gentoo support

  * Close #999: gentoo: hostname is in /etc/conf.d/hostname

  * Setup/Debian.pm: use BEGIN/END markers for gateway scripts

  * fix deletion of backup snapshots

  * exclude non-volume mps from backup

  * don't allow automatic restore to dev/bind rootfs

  * warn about unsupported backup configuration

  * add ignore_ro flag to mount_all

  * automatically restore mountpoints from backup

  * deal with a check_mount_path race condition

 -- Proxmox Support Team <support@proxmox.com>  Wed, 25 May 2016 10:18:25 +0200

pve-container (1.0-65) unstable; urgency=medium

  * allow VLAN 1 tag in containers

  * remove backup property from rootfs

  * new helper mountpoint_backup_enabled()

 -- Proxmox Support Team <support@proxmox.com>  Wed, 18 May 2016 11:30:16 +0200

pve-container (1.0-64) unstable; urgency=medium

  * setup: add ct_is_executable wrapper

  * setup: check if securetty exists

  * improve error message on container without rootfs

 -- Proxmox Support Team <support@proxmox.com>  Sat, 14 May 2016 09:06:11 +0200

pve-container (1.0-63) unstable; urgency=medium

  * cleanup gateway hooks in debian network setup

  * fix uninitialized value warning

  * Alpine: generate correct inittab

  * Alpine: fixup securetty

  * fix #971: don't activate shared storage in offline migration

 -- Proxmox Support Team <support@proxmox.com>  Tue, 03 May 2016 07:19:19 +0200

pve-container (1.0-62) unstable; urgency=medium

  * centos: fixup ipv6 out-of-subnet route

  * debian: always include the 'dev' portion in explicit routes

  * setup: deal with link-local gateways

 -- Proxmox Support Team <support@proxmox.com>  Tue, 26 Apr 2016 16:00:06 +0200

pve-container (1.0-61) unstable; urgency=medium

  * add support for ubuntu xenial

  * push/pull permissions: use octal by default

  * fix #942: restore ACL and other rootfs options from backup

  * Debian: correctly setup getty service on systemd based containers

  * honor acl setting with zfs

 -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Apr 2016 11:25:34 +0200

pve-container (1.0-60) unstable; urgency=medium

  * vm_status: return more verbose HA state

 -- Proxmox Support Team <support@proxmox.com>  Tue, 19 Apr 2016 09:04:43 +0200

pve-container (1.0-59) unstable; urgency=medium

  * setup: ability to ignore files

  * Fix #929: delete veths in the post-stop hook

 -- Proxmox Support Team <support@proxmox.com>  Wed, 13 Apr 2016 10:32:03 +0200

pve-container (1.0-58) unstable; urgency=medium

  * Build-Depend on pve-doc-generator

  * generate manpages with pve-doc-generator

  * debian: support containers upgraded to use systemd

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 Apr 2016 12:36:29 +0200

pve-container (1.0-57) unstable; urgency=medium

  * Add authorized ssh key setup to post_create_hook

  * Add missing '\n' to content in ct_modify_file

  * Add 'perms' option to ct_modify_file

 -- Proxmox Support Team <support@proxmox.com>  Tue, 05 Apr 2016 15:29:22 +0200

pve-container (1.0-56) unstable; urgency=medium

  * use consistent prefix for worker names

 -- Proxmox Support Team <support@proxmox.com>  Mon, 04 Apr 2016 16:39:28 +0200

pve-container (1.0-55) unstable; urgency=medium

  * add read_password sub for 'pct create'

  * use asciicode compatible markup

  * enable quotas for passed through /dev devices

  * Fix #925: activate volume before trying to resize

 -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Apr 2016 07:20:36 +0200

pve-container (1.0-54) unstable; urgency=medium

  * Fix #918: add /dev/mapper symlinks for dm-* devices

  * autodev: create missing paths

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Mar 2016 16:35:01 +0100

pve-container (1.0-53) unstable; urgency=medium

  * Add force parameter for migration with bind/dev mp

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Mar 2016 16:51:40 +0100

pve-container (1.0-52) unstable; urgency=medium

  * Prevent race conditions in snapshot mode backup

  * Use set_lock and remove_lock

  * require -experimental for pct clone and template

 -- Proxmox Support Team <support@proxmox.com>  Mon, 14 Mar 2016 09:00:04 +0100

pve-container (1.0-51) unstable; urgency=medium

  * fix #912: centos/redhat confusion

  * implement cpulimit hotplugging

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Mar 2016 17:52:33 +0100

pve-container (1.0-50) unstable; urgency=medium

  * follow the change in PVE::AbstractConfig

  * implement rate limiting

 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Mar 2016 11:37:09 +0100

pve-container (1.0-49) unstable; urgency=medium

  * change update_etc_hosts to use ct_modify_file

 -- Proxmox Support Team <support@proxmox.com>  Mon, 07 Mar 2016 09:49:39 +0100

pve-container (1.0-48) unstable; urgency=medium

  * Refactor config-related methods into AbstractConfig

 -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Mar 2016 10:21:45 +0100

pve-container (1.0-47) unstable; urgency=medium

  * Implement pct mount/unmount (for emergency maintenance)

  * Implement pct push/pull

 -- Proxmox Support Team <support@proxmox.com>  Sat, 27 Feb 2016 14:38:14 +0100

pve-container (1.0-46) unstable; urgency=medium

  * setup: move setup_container_getty_service to Base

  * suse: move setup_securetty to template_fixup()

  * Add to unused volumes only if really unused

  * exclude 'parent' from config when restoring

 -- Proxmox Support Team <support@proxmox.com>  Thu, 18 Feb 2016 11:49:15 +0100

pve-container (1.0-45) unstable; urgency=medium

  * add Alpine Linux distribution

 -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Feb 2016 12:15:11 +0100

pve-container (1.0-44) unstable; urgency=medium

  * snapshot: replace global sync with a namespace sync

  * add support for read-only bind mounts

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Feb 2016 11:57:11 +0100

pve-container (1.0-43) unstable; urgency=medium

  * Improve error handling in snapshot_create

  * VZDump lock update, drop lock_aquire/lock_release

  * prevent snapshot name 'vzdump' from user

  * improve mountpoint parsing

  * added quota flag to mountpoints (disk quota support)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Feb 2016 06:58:26 +0100

pve-container (1.0-42) unstable; urgency=medium

  * fix growing of a running container's memory limit

  * opensuse 13.2 support

  * added $skiplock parameter for pct start/stop

  * Fix #791: warn when resize2fs fails

  * Fix #881: uninitialized value on valid lxc.cgroup keys

  * Remove mknod call from pre-start hook

  * Only add actual volumes to volid_list

 -- Proxmox Support Team <support@proxmox.com>  Mon, 08 Feb 2016 12:17:27 +0100

pve-container (1.0-41) unstable; urgency=medium

  * added 'acl' and 'ro' mountpoint options

  * fix PVE::HA use clauses

  * create firewall dir on CT restore

  * Closes #877: Skip mps with backup=0 for snapshot backups

 -- Proxmox Support Team <support@proxmox.com>  Wed, 27 Jan 2016 16:43:27 +0100

pve-container (1.0-40) unstable; urgency=medium

  * Add dependency to 'file' package

  * Implement linked clones

  * Rework snapshot config removal logic

  * Don't hold flock for whole backup operation

 -- Proxmox Support Team <support@proxmox.com>  Sat, 23 Jan 2016 08:56:34 +0100

pve-container (1.0-39) unstable; urgency=medium

  * add support for network trunks

 -- Proxmox Support Team <support@proxmox.com>  Mon, 18 Jan 2016 17:01:38 +0100

pve-container (1.0-38) unstable; urgency=medium

  * Set backup lock during stop and suspend backups

  * Check lock for pct start, stop, suspend, shutdown

  * fix mount_all, improve bind mount handling

  * Add mp to required in pct set mount-point

  * snapshot_create: unfreeze after snapshot creation

  * allow to create containers on lvmthin storage

 -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Jan 2016 17:13:31 +0100

pve-container (1.0-37) unstable; urgency=medium

  * check for quorum when starting a container

  * vm_stop: make sure the container is stopped using lxc-wait

 -- Proxmox Support Team <support@proxmox.com>  Sun, 10 Jan 2016 15:14:22 +0100

pve-container (1.0-36) unstable; urgency=medium

  * vzdump stop mode: wait until container is stopped

 -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Dec 2015 15:49:20 +0100

pve-container (1.0-35) unstable; urgency=medium

  * Setup: order fqdn before hostname in /etc/hosts

 -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Dec 2015 09:09:48 +0100

pve-container (1.0-34) unstable; urgency=medium

  * Revert "set memory.kmem.limit_in_bytes"

 -- Proxmox Support Team <support@proxmox.com>  Thu, 17 Dec 2015 12:28:11 +0100

pve-container (1.0-33) unstable; urgency=medium

  * fix bug #840: vzdump - fix compression command pipe

 -- Proxmox Support Team <support@proxmox.com>  Mon, 14 Dec 2015 08:48:16 +0100

pve-container (1.0-32) unstable; urgency=medium

  * Revert "Mounting of zfspool snapshots are not necessary."

 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Dec 2015 08:10:27 +0100

pve-container (1.0-31) unstable; urgency=medium

  * Revert "use the unmount-namespace stop hook"

 -- Proxmox Support Team <support@proxmox.com>  Fri, 04 Dec 2015 16:33:09 +0100

pve-container (1.0-30) unstable; urgency=medium

  * OpenSUSE 13.1 support added

  * create: don't skip arch detection on unpack errors

 -- Proxmox Support Team <support@proxmox.com>  Wed, 02 Dec 2015 11:03:47 +0100

pve-container (1.0-29) unstable; urgency=medium

  * add 'fedora' to ostype schema enum

 -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Dec 2015 11:24:26 +0100

pve-container (1.0-28) unstable; urgency=medium

  * renamed lxc.start.unshare to lxc.monitor.unshare

 -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Dec 2015 09:56:33 +0100

pve-container (1.0-27) unstable; urgency=medium

  * fix bug #827: Setup: don't replace fqdn with searchdomain in /etc/hosts

  * add support for Fedora 22
  
  * add/restore firewall config with vzdump

  * warn when trying to delete non-existent options

  * create_disks: don't drop extra parameters

  * vzdump: exclude lost+found with unprivilged containers

  * don't restore mountpoint settings

  * vzdump: use --anchored on tar

  * honor backup=yes/no for bind and device mountpoints

  * Redhat: handle /etc/sysconfig/network better

  * Redhat: fix ipv4 dhcp only setup

 -- Proxmox Support Team <support@proxmox.com>  Thu, 26 Nov 2015 09:59:30 +0100

pve-container (1.0-26) unstable; urgency=medium

  * Mounting of zfspool snapshots are not necessary

  * use the unmount-namespace stop hook

  * vzdump: warn about lack of xattr/acl support on nfs

  * Use new lxc.start.unshare setting

  * set memory.kmem.limit_in_bytes

 -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Nov 2015 12:43:02 +0100

pve-container (1.0-25) unstable; urgency=medium

  * support unpriviledged containers

  * improve OS type detection

  * remove --totals from COMMON_TAR_FLAGS

  * vzdump: userns support

 -- Proxmox Support Team <support@proxmox.com>  Sat, 14 Nov 2015 10:29:14 +0100

pve-container (1.0-24) unstable; urgency=medium

  * setup: fix ssh-key perms lost with the rewrite

  * create/restore: add --warning=no-xattr-write to tar

 -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Nov 2015 16:19:47 +0100

pve-container (1.0-23) unstable; urgency=medium

  * improve setup error message

  * create: safer rewrite_ssh_host_keys

 -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Nov 2015 11:44:20 +0100

pve-container (1.0-22) unstable; urgency=medium

  * preserve posix capabilities

 -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Nov 2015 10:56:32 +0100

pve-container (1.0-21) unstable; urgency=medium

  * allow debian stretch/sid containers

  * destroy: check if container is still running

  * LXC::Setup: Load required host files in new()

 -- Proxmox Support Team <support@proxmox.com>  Wed, 04 Nov 2015 11:23:00 +0100

pve-container (1.0-20) unstable; urgency=medium

  * fix bug #799: resize running CT with no loopdev.

  * Setup: fix bad /dev bindmount

 -- Proxmox Support Team <support@proxmox.com>  Mon, 02 Nov 2015 11:16:25 +0100

pve-container (1.0-19) unstable; urgency=medium

  * support Ubuntu 15.10

 -- Proxmox Support Team <support@proxmox.com>  Sat, 31 Oct 2015 18:39:39 +0100

pve-container (1.0-18) unstable; urgency=medium

  * depend on xz-utils

 -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Oct 2015 06:48:20 +0100

pve-container (1.0-17) unstable; urgency=medium

  * fix bug #770: CPU usage stats for containers
  
  * added symlink testcase

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Oct 2015 13:09:29 +0100

pve-container (1.0-16) unstable; urgency=medium

  * fix bug #770: implement Network stats for containers

  * LXC::Setup: chroot into the container (thanks to RACK911Labs.com for
    the hint)

  * LXC::get_primary_ips: ipv6 can be 'auto'

 -- Proxmox Support Team <support@proxmox.com>  Thu, 29 Oct 2015 11:43:30 +0100

pve-container (1.0-15) unstable; urgency=medium

  * Start a worker in lxc resize

  * move resize to have it available in the pveshell and at the rest api

  * allow to mount iso images

 -- Proxmox Support Team <support@proxmox.com>  Wed, 28 Oct 2015 11:27:46 +0100

pve-container (1.0-14) unstable; urgency=medium

  * redhat: fix unused values

 -- Proxmox Support Team <support@proxmox.com>  Thu, 22 Oct 2015 12:10:56 +0200

pve-container (1.0-13) unstable; urgency=medium

  * restore: make sure only the first pct.conf is extracted

  * redhat: don't use aliases for dual stack networking

  * redhat: use the fully qualified hostname

 -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Oct 2015 08:31:24 +0200

pve-container (1.0-12) unstable; urgency=medium

  * allow /32 CIDRs and remove duplicated mask array

  * network setup: deal with gateways outside the subnet

  * redhat: use the fully qualified hostname

 -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Oct 2015 08:52:02 +0200

pve-container (1.0-11) unstable; urgency=medium

  * setup/debian: avoid writing multiple auto lines

  * setup/debian: avoid extra newlines

  * allow /32 CIDRs and remove duplicated mask array

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Oct 2015 09:49:28 +0200

pve-container (1.0-10) unstable; urgency=medium

  * improve regex to match redhat/centos OS version

 -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Oct 2015 08:27:06 +0200

pve-container (1.0-9) unstable; urgency=medium

  * use new PVE::JSONSchema::parse_siz

  * Add new pct fsck command to check the mountpoints of a container

  * update inittab instead of replacing it

 -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Oct 2015 10:25:56 +0200

pve-container (1.0-8) unstable; urgency=medium

  * make bridge parameter option - required for hotplug code

  * fix test if storage allows containers

  * fix bug #752: correct size of mount point after resize

  * fix bug #750: deactivate volumes to be sure there are no volumes
    are active on the source node

 -- Proxmox Support Team <support@proxmox.com>  Sat, 10 Oct 2015 17:24:31 +0200

pve-container (1.0-7) unstable; urgency=medium

  * Create /fastboot to skip run fsck

 -- Proxmox Support Team <support@proxmox.com>  Thu, 08 Oct 2015 11:47:47 +0200

pve-container (1.0-6) unstable; urgency=medium

  * cleanup: replace disk-size calculation in pct resize

 -- Proxmox Support Team <support@proxmox.com>  Tue, 06 Oct 2015 09:37:44 +0200

pve-container (1.0-5) unstable; urgency=medium

  * lxc hooks: use run_cli_handler(), remove stale docs

 -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Oct 2015 13:47:30 +0200

pve-container (1.0-4) unstable; urgency=medium

  * remove 'noload' option from zfspool mounts

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Oct 2015 16:28:04 +0200

pve-container (1.0-3) unstable; urgency=medium

  * fix hotplug error in update_pct_config

  * added lxc.hook.stop to valid_lxc_conf_keys

  * add mountpoint deletion support and unused volumes

  * set minimum mtu to 64

 -- Proxmox Support Team <support@proxmox.com>  Thu, 01 Oct 2015 11:42:34 +0200

pve-container (1.0-2) unstable; urgency=medium

  * set TERM=linux for containers

 -- Proxmox Support Team <support@proxmox.com>  Wed, 30 Sep 2015 09:27:01 +0200

pve-container (1.0-1) unstable; urgency=medium

  * vzdump: mount snapshots with the noload option

  * vzdump:lxc: sync and skip journal in snapshot mode

 -- Proxmox Support Team <support@proxmox.com>  Fri, 25 Sep 2015 17:55:13 +0200

pve-container (0.9-23) unstable; urgency=medium

  * Use format hashes in json schemas

  * When destroying a container, remove bind mounts and block devices
    from the list of volumes to delete.

  * improve CT protection mode

  * vzdump: tar: disable warnings about ignored files

 -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Sep 2015 10:11:31 +0200

pve-container (0.9-22) unstable; urgency=medium

  * allow to parse configuration values with spaces

  * specify data format for hostname, searchdomain and nameserver

  * add check for newlines before writing configuration

  * vzdump fixes

  * mountpoint_mount: disallow symlinks in bind mounts

  * lxc API: use new disk option names in permission check
  
 -- Proxmox Support Team <support@proxmox.com>  Mon, 21 Sep 2015 12:14:31 +0200

pve-container (0.9-21) unstable; urgency=medium

  * vzdump: support mountpoints

  * change tar/rsync_vm to use the new exclude pattern method

 -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Sep 2015 11:38:24 +0200

pve-container (0.9-20) unstable; urgency=medium

  * fix bug #712: fix stop mode backups when container is running

  * add support for LVM

 -- Proxmox Support Team <support@proxmox.com>  Mon, 14 Sep 2015 09:29:57 +0200

pve-container (0.9-19) unstable; urgency=medium

  * allow older debian versions (>= 4 (etch))

  * fix subvolume mounts (do not use loop device)

 -- Proxmox Support Team <support@proxmox.com>  Fri, 11 Sep 2015 09:19:03 +0200

pve-container (0.9-18) unstable; urgency=medium

  * fix bug #710: use correct size for OpenVZ restore

  * format_disk: call activate_volume()

 -- Proxmox Support Team <support@proxmox.com>  Thu, 10 Sep 2015 10:13:29 +0200

pve-container (0.9-17) unstable; urgency=medium

  * mount_all: make sure rootfs exists (fix openvz restore bug)

  * destroy: avoid warning about undefined 'protection' value

 -- Proxmox Support Team <support@proxmox.com>  Thu, 10 Sep 2015 07:04:24 +0200

pve-container (0.9-16) unstable; urgency=medium

  * fix bug #707: Don't die in vm_shutdown when we have no errors

  * add CT protection mode
  
 -- Proxmox Support Team <support@proxmox.com>  Wed, 09 Sep 2015 17:23:04 +0200

pve-container (0.9-15) unstable; urgency=medium

  * add bash completion support

  * support resizing of owned container disks

  * get rid of most of the loop-devices code

  * fix unlock handling after migration

  * add command to unlock a Container if it is locked

  * add support to add mountpoints with pct set

  * added pct exec command

  * add missing archlinux ostype confdesc enum entry

  * destroy owned mountpoints on pct destroy

  * use multiple mount protection (mmp)

  * many bug fixes
      
 -- Proxmox Support Team <support@proxmox.com>  Tue, 08 Sep 2015 07:28:41 +0200

pve-container (0.9-14) unstable; urgency=medium

  * vm_create : add support for mountpoints
  
  * run spiceterm and return spiceproxy config only if CT is running

  * vzdump: correctly implement snapshot backup

  * vzdump: use correct pid to access container root (fix suspend mode
  backup)

  * fix bug #691: fix vzdump stop mode backup on zfs

 -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Aug 2015 11:47:32 +0200

pve-container (0.9-13) unstable; urgency=medium

  * detect ostype when restoring OpenVZ containers

 -- Proxmox Support Team <support@proxmox.com>  Tue, 25 Aug 2015 12:55:20 +0200

pve-container (0.9-12) unstable; urgency=medium

  * code cleanups

  * implement pct listsnapshot cli command

 -- Proxmox Support Team <support@proxmox.com>  Mon, 24 Aug 2015 06:32:05 +0200

pve-container (0.9-11) unstable; urgency=medium

  * add mpX mountpoint configuration (experimental)
  
  * remove <vmid>.fw file after lxc vm destroy

  * cleanup directory structure

  * add file access methods to LXCSetup::Base

  * mountpoint: add support for host /dev/xxx block device passthrough

  * Added PVE::LXCSetup::Base::setup_securetty

  * archlinux template support

  * implement new cmode option

  * implement template creation

  * add rbd storage type support

  * do not use hardcoded disk image names

 -- Proxmox Support Team <support@proxmox.com>  Wed, 19 Aug 2015 15:51:13 +0200

pve-container (0.9-10) unstable; urgency=medium

  * add support for RHEL/CentOS
  
  * allow to set empty lxc.xxx values
  
  * added pve-update-lxc-config postinstall hook

 -- Proxmox Support Team <support@proxmox.com>  Tue, 11 Aug 2015 10:23:33 +0200

pve-container (0.9-9) unstable; urgency=medium

  * Fix: If a Ct are created and a pool are given add the Ct to pool

  * don't set proxy_arp and forwarding on lxc veths

  * activate/deactivates volumes on container start/stop

  * allow to use drbd storage for containers

  * add manual page for container configuration format ("man pct.conf")

 -- Proxmox Support Team <support@proxmox.com>  Fri, 07 Aug 2015 12:11:22 +0200

pve-container (0.9-8) unstable; urgency=medium

  * use our own configuration format for containers

 -- Proxmox Support Team <support@proxmox.com>  Thu, 06 Aug 2015 11:28:27 +0200

pve-container (0.9-7) unstable; urgency=medium

  * fixes for container restore

 -- Proxmox Support Team <support@proxmox.com>  Fri, 31 Jul 2015 12:20:13 +0200

pve-container (0.9-6) unstable; urgency=medium

  * fix memory and swap size calculations

  * ipv6 slaac/autoconf support

  * fix ipv4 replacement of running containers

  * allow to restore backups of openvz containers

 -- Proxmox Support Team <support@proxmox.com>  Fri, 31 Jul 2015 11:09:44 +0200

pve-container (0.9-5) unstable; urgency=medium

  * correctly detect container architecture

 -- Proxmox Support Team <support@proxmox.com>  Mon, 27 Jul 2015 09:38:45 +0200

pve-container (0.9-4) unstable; urgency=medium

  * allow configuring lxc.seccomp

  * network setup: allow dhcp, manual and unmanaged network

  * implement snapshot API

  * implement snapshots for zfs
  
 -- Proxmox Support Team <support@proxmox.com>  Fri, 24 Jul 2015 13:12:16 +0200

pve-container (0.9-3) unstable; urgency=medium

  * fix tty setup for debian6

 -- Proxmox Support Team <support@proxmox.com>  Fri, 03 Jul 2015 06:41:08 +0200

pve-container (0.9-2) unstable; urgency=medium

  * correctly set password change time

 -- Proxmox Support Team <support@proxmox.com>  Wed, 01 Jul 2015 11:03:37 +0200

pve-container (0.9-1) unstable; urgency=medium

  * correctly untaint crontab filenames

  * create new ssh host keys at startup

  * add net hotplug and hotplug ip configuration

  * add support for Ubuntu 15.04

 -- Proxmox Support Team <support@proxmox.com>  Mon, 29 Jun 2015 12:38:46 +0200

pve-container (0.8-1) unstable; urgency=medium

  * only use lxc-pve-mount-hook for containers on /etc/pve/

 -- Proxmox Support Team <support@proxmox.com>  Wed, 24 Jun 2015 06:41:37 +0200

pve-container (0.7-2) unstable; urgency=medium

  * use nowait trigger for pve-api-updates

 -- Proxmox Support Team <support@proxmox.com>  Mon, 01 Jun 2015 12:30:08 +0200

pve-container (0.7-1) unstable; urgency=medium

  * randomize crontab entries

  * install global lxc config

 -- Proxmox Support Team <support@proxmox.com>  Thu, 07 May 2015 09:09:15 +0200

pve-container (0.6-2) unstable; urgency=medium

  * depend on lxc-pve

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 May 2015 10:37:18 +0200

pve-container (0.6-1) unstable; urgency=medium

  * add support for centos6

 -- Proxmox Support Team <support@proxmox.com>  Wed, 06 May 2015 10:20:46 +0200

pve-container (0.5-1) unstable; urgency=medium

  * implement restore command

  * implement disk size parameter (loop mounts)

 -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Apr 2015 18:46:23 +0200

pve-container (0.4-1) unstable; urgency=medium

  * allow to setup root password

  * implement dns setup for containers

  * implement startup and onboot option

  * implement cpuunits

  * add firewall and vlan tag network options

 -- Proxmox Support Team <support@proxmox.com>  Thu, 23 Apr 2015 10:58:45 +0200

pve-container (0.3-1) unstable; urgency=medium

  * implement lxcnetaddbr to bring up network

  * implement swap and cpulimit

  * add regression tests

  * add mount hook to setup container config

  * add helper classes to setup container configuration

 -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Apr 2015 07:50:02 +0200

pve-container (0.2-1) unstable; urgency=medium

  * improved CLI

 -- Proxmox Support Team <support@proxmox.com>  Sat, 18 Apr 2015 10:38:52 +0200

pve-container (0.1-1) unstable; urgency=medium

  * first try

 -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Apr 2015 06:50:08 +0200