]>
Commit | Line | Data |
---|---|---|
b3ca654d TL |
1 | proxmox-installer (8.1.9) bookworm; urgency=medium |
2 | ||
3 | * run command: avoid using the true value 1 as a special value for parser | |
4 | closure to avoid false-positive detection of CMD_FINISHED flag | |
5 | ||
6 | -- Proxmox Support Team <support@proxmox.com> Mon, 26 Feb 2024 15:11:45 +0100 | |
7 | ||
719d617f TL |
8 | proxmox-installer (8.1.8) bookworm; urgency=medium |
9 | ||
10 | * ZFS : remove deprecated "fletcher2" algorithm and the dangerous "off" | |
11 | checksum options | |
12 | ||
13 | * GTK based UI: replace the use of nested boxes for layouting with grids | |
14 | when possible to ensure correct margins and alignment of widgets. | |
15 | ||
16 | * fix #4872: run env: set timeout for country detection | |
17 | ||
18 | * common: fqdn: do not allow overlong FQDNs, limit to 63 characters per part | |
19 | and 253 charactrers total, as per Debian spec | |
20 | ||
21 | * common: fqdn: implement case-insensitive comparison as per RFC 952 | |
22 | ||
23 | * fix #5230: properly escape FQDN regex to avoid that problematic values can | |
24 | make it into the host configuration files by mistake | |
25 | ||
26 | * switch over to JSON-based protocol for installer to UI communication | |
27 | ||
28 | ||
29 | -- Proxmox Support Team <support@proxmox.com> Sat, 24 Feb 2024 16:30:08 +0100 | |
30 | ||
52c995e2 TL |
31 | proxmox-installer (8.1.7) bookworm; urgency=medium |
32 | ||
33 | * source interfaces.d snippets by default | |
34 | ||
35 | -- Proxmox Support Team <support@proxmox.com> Thu, 23 Nov 2023 11:11:20 +0100 | |
36 | ||
819ded5e TL |
37 | proxmox-installer (8.1.6) bookworm; urgency=medium |
38 | ||
39 | * grub: install all efi binaries in fallback/default dir | |
40 | ||
41 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2023 13:30:06 +0100 | |
42 | ||
fd45abf8 TL |
43 | proxmox-installer (8.1.5) bookworm; urgency=medium |
44 | ||
45 | * various fixes for the TUI installer: | |
46 | - do not center EULA text | |
47 | - preserve auto-reboot checkbox state when switching views | |
48 | - common: enforce even number of disks for ZFS RAID-10 | |
49 | ||
50 | * serial installer: add serial config for grub to target system | |
51 | ||
52 | * zfs: create dataset var-lib-vz for /var/lib/vz to avoid to many | |
53 | intermediate datasets | |
54 | ||
55 | * ZFS: detect and handle secure boot | |
56 | ||
57 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2023 14:22:23 +0100 | |
58 | ||
949f192e TL |
59 | proxmox-installer (8.1.4) bookworm; urgency=medium |
60 | ||
61 | * tui: fix changing between non-LVM and LVM filesystem in bootdisk chooser | |
62 | ||
63 | * ui: stdio: replace newlines with whitespaces in prompt messages | |
64 | ||
65 | * tui: install progress: use ok/cancel as button text for installer prompt | |
66 | ||
67 | * tui: bootdisk zfs config: add a maximum value to the `copies` option | |
68 | ||
69 | * tui: fix interface sort order | |
70 | ||
71 | -- Proxmox Support Team <support@proxmox.com> Fri, 17 Nov 2023 19:35:19 +0100 | |
72 | ||
1f7d8d09 TL |
73 | proxmox-installer (8.1.3) bookworm; urgency=medium |
74 | ||
75 | * run env: do not store empty hostname when trying to detect from DHCP | |
76 | ||
77 | * gtk installer: show the unit of inputs for the disk related options | |
78 | ||
79 | -- Proxmox Support Team <support@proxmox.com> Fri, 17 Nov 2023 07:39:23 +0100 | |
80 | ||
a8379706 TL |
81 | proxmox-installer (8.1.2) bookworm; urgency=medium |
82 | ||
83 | * x display server: disable screen saver via blank time | |
84 | ||
85 | * zfs: create /var/lib/vz only for PVE | |
86 | ||
87 | -- Proxmox Support Team <support@proxmox.com> Thu, 16 Nov 2023 19:21:09 +0100 | |
88 | ||
f7acac05 TL |
89 | proxmox-installer (8.1.1) bookworm; urgency=medium |
90 | ||
91 | * pass optional console parameter from installer to target | |
92 | ||
93 | * serial install: fix console parameter parsing | |
94 | ||
95 | * fix #4747: pass kernel cmdline parameters to target system | |
96 | ||
97 | * fix #1410: zfs: create /var/lib/vz as separate dataset | |
98 | ||
99 | * zfs: set acltype=posix for root-dataset to ensure that daemons like | |
100 | journald can provide fine-grained access to non-root users. | |
101 | ||
102 | -- Proxmox Support Team <support@proxmox.com> Thu, 16 Nov 2023 08:33:32 +0100 | |
103 | ||
36a14a61 TL |
104 | proxmox-installer (8.1.0) bookworm; urgency=medium |
105 | ||
106 | * various improvements for the TUI installer: | |
107 | - fix #4856: bootdisk: use correct defaults in advanced dialog. | |
108 | - fix incorrect scrolling of form view contents. | |
109 | - don't abort install if minimum memory requirement is not met, allow | |
110 | the user to override this just like in the GTK based installer. | |
111 | - add "Deselect All" button to ZFS and Btrfs multiple disk selection. | |
112 | - improve FQDN validation. | |
113 | - improve bootdisk dialog error handling. | |
114 | - add RAID setup checks for ZFS/Btrfs. | |
115 | - password: include minimum password length in error message. | |
116 | - network: select matching NIC for IP configuration. | |
117 | - setup: fix disk size for 4Kn block devices. | |
118 | - setup: handle missing disk block size gracefully. | |
119 | - update count down of auto-reboot timeout every second like the GTK based | |
120 | installer does. | |
121 | - fix various typos. | |
122 | ||
123 | * disk partitioning: fix checking the answer for the to-small-disk prompt. | |
124 | ||
125 | * raid setup: btrfs: do not allow legacy BIOS boot on 4Kn disks, like it's | |
126 | already checked for LVM and ZFS. | |
127 | ||
128 | * fix #4869: Add marker to the network interfaces that are in an UP-state in | |
129 | the management interface selection. | |
130 | ||
131 | * re-use hostname from the runtime environment, if available. For now, this | |
132 | info comes from the DHCP lease only. | |
133 | ||
134 | * fix #4829: install: add new ZFS `arc_max` setup option and set the default | |
135 | for Proxmox VE installations via a new heuristic, targetting 10 % of | |
136 | memory, not 50 % and clamp this to minimum 64 MiB and maxmimum 16 GiB. | |
137 | This ensures that most memory is available for virtual guests, the primary | |
138 | use case of Proxmox VE. | |
139 | ||
140 | * install correct grub metapackage for the current boot-mode. | |
141 | ||
142 | -- Proxmox Support Team <support@proxmox.com> Sat, 11 Nov 2023 14:31:49 +0100 | |
143 | ||
8186bc7b TL |
144 | proxmox-installer (8.0.14) bookworm; urgency=medium |
145 | ||
146 | * pmg: disable clamav-clamonacc.service by default on installation | |
147 | ||
148 | -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jun 2023 18:39:41 +0200 | |
149 | ||
aac8082f | 150 | proxmox-installer (8.0.13) bookworm; urgency=medium |
87c98625 TL |
151 | |
152 | * tui: only show warning for missing hyper-visor CPU flags for PVE | |
153 | ||
154 | * tui: block & notify if same disk gets selected twice for Btrfs or ZFS | |
155 | ||
aac8082f TL |
156 | * tui: persist disk selection for ZFS and Btrfs |
157 | ||
158 | -- Proxmox Support Team <support@proxmox.com> Tue, 27 Jun 2023 16:19:33 +0200 | |
87c98625 | 159 | |
ce8fdebb TL |
160 | proxmox-installer (8.0.11) bookworm; urgency=medium |
161 | ||
162 | * tui: hide max-vz and max-root inputs if product isn't PVE to be consistent | |
163 | with the GTK based installer. | |
164 | ||
165 | -- Proxmox Support Team <support@proxmox.com> Mon, 26 Jun 2023 21:39:45 +0200 | |
166 | ||
eab366db TL |
167 | proxmox-installer (8.0.10) bookworm; urgency=medium |
168 | ||
169 | * tui: use product for default hostname | |
170 | ||
171 | * tui: boot disks: filter out Btrfs if setup-info disallows it, like for | |
172 | Proxmox Mail Gateway or Proxmox Backup Server currently. | |
173 | ||
174 | -- Proxmox Support Team <support@proxmox.com> Mon, 26 Jun 2023 19:09:07 +0200 | |
175 | ||
f8a5d041 TL |
176 | proxmox-installer (8.0.9) bookworm; urgency=medium |
177 | ||
178 | * tui: switch to `f64` for disk sizes for full range of values | |
179 | ||
180 | * tui: wrap multi-disk selection in scrollable view | |
181 | ||
182 | * tui: disable automatic text wrapping for form labels | |
183 | ||
184 | * tui: add some info to unknown UI messages | |
185 | ||
186 | * tui: do not auto reboot on failures | |
187 | ||
188 | * gtk: raid disk selector: separate UI state from config state to avoid | |
189 | messing with the order of selection | |
190 | ||
191 | * align metadata size and rootdisk size to 4 MiB | |
192 | ||
193 | * fix space calculation for small disks for pve product | |
194 | ||
195 | -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2023 16:48:18 +0200 | |
196 | ||
f6159385 TL |
197 | proxmox-installer (8.0.8) bookworm; urgency=medium |
198 | ||
199 | * Revert "critic: lazily read directories via <> glob" | |
200 | ||
201 | -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2023 10:48:12 +0200 | |
202 | ||
4d942895 TL |
203 | proxmox-installer (8.0.7) bookworm; urgency=medium |
204 | ||
205 | * fix checking the response of the prompt, which is now returning a boolean. | |
206 | This fixes an issue where the user was prompted for small root disk space | |
207 | or if renaming the PVE VG is ok, but the installer always aborted. | |
208 | ||
209 | -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2023 07:38:24 +0200 | |
210 | ||
cb879145 TL |
211 | proxmox-installer (8.0.6) bookworm; urgency=medium |
212 | ||
213 | * tui: remove underline-effect from advanced disk setup titles | |
214 | ||
215 | * tui: clamp max LVM disk size to size of selected disk | |
216 | ||
217 | * tui: fix ability to type commas | |
218 | ||
219 | * tui: do not fail completely on invalid domain names | |
220 | ||
221 | * tui: always use mail@example.invalid as default email address | |
222 | ||
223 | * run env: re-used cached version to speed up GUI installer start | |
224 | ||
225 | * log: record when and that the log got initialized and add some more | |
226 | logging, especially at start up | |
227 | ||
228 | * tui: improve ipv6 handling | |
229 | ||
230 | * tui: focus next button by default | |
231 | ||
232 | -- Proxmox Support Team <support@proxmox.com> Wed, 21 Jun 2023 18:42:27 +0200 | |
233 | ||
bd6a3424 TL |
234 | proxmox-installer (8.0.5) bookworm; urgency=medium |
235 | ||
236 | * various fixes for the TUI: | |
237 | - make HVM extension not being present a non-fatal warning | |
238 | - do not fail completely on invalid domain names | |
239 | - make disk swap-, max-root-, max-data- and min-lvm-free-size optional | |
240 | falling back to the proxinstall automatic smart defaults in that case. | |
241 | - make auto-deteced network routes optional | |
242 | - skip serializing empty fields for install config | |
243 | - set detected keyboard layout at installer launch | |
244 | - only focus summary table if it can be scrolled | |
245 | - refresh summary view if it is switched back to | |
246 | - make reboot-after-install checkbox default to enabled | |
247 | - redirect TUI stderr output to tty2 | |
248 | - use non-slanted logo | |
249 | - implement auto-reboot after installation | |
250 | ||
251 | * config: fix missing include of Log module and avoid warning if no country | |
252 | was detected | |
253 | ||
254 | * run env: make addresses optional, include all interfaces | |
255 | ||
256 | * fix #4643: show a confirmation dialog when clicking abort | |
257 | ||
258 | -- Proxmox Support Team <support@proxmox.com> Wed, 21 Jun 2023 13:22:38 +0200 | |
259 | ||
1de369c5 TL |
260 | proxmox-installer (8.0.4) bookworm; urgency=medium |
261 | ||
262 | * re-add Encode module for decoding EULA in GTK installer | |
263 | ||
264 | -- Proxmox Support Team <support@proxmox.com> Tue, 20 Jun 2023 22:02:57 +0200 | |
265 | ||
7e85b1e5 TL |
266 | proxmox-installer (8.0.3) bookworm; urgency=medium |
267 | ||
268 | * switch to native versioning | |
269 | ||
270 | * Add Terminal User Interface (TUI) based installer written in Rust, using | |
271 | the Cursive toolkit. | |
272 | ||
273 | * A variety of fixes and refactoring to prepare for more flexible ways of | |
274 | triggering an installation | |
275 | ||
276 | -- Proxmox Support Team <support@proxmox.com> Tue, 20 Jun 2023 21:37:09 +0200 | |
277 | ||
37724441 TL |
278 | proxmox-installer (8.0-2) bookworm; urgency=medium |
279 | ||
280 | * fix call to logical_blocksize | |
281 | ||
282 | -- Proxmox Support Team <support@proxmox.com> Fri, 09 Jun 2023 11:16:18 +0200 | |
283 | ||
c017c55e | 284 | proxmox-installer (8.0-1) bookworm; urgency=medium |
21757a99 TL |
285 | |
286 | * fix typo in error message | |
287 | ||
288 | * checktime: output expected and wrong times for better UX | |
289 | ||
290 | * refactor and split up installer code in modules, in preparation of more | |
291 | installer modi/UIs | |
292 | ||
293 | * call Gtk3::init manually, not on perl module load | |
294 | ||
295 | * call setupcon when starting-up final installer environment, applying the | |
296 | UTF-8 charset. | |
297 | ||
c017c55e | 298 | -- Proxmox Support Team <support@proxmox.com> Fri, 09 Jun 2023 09:39:09 +0200 |
21757a99 | 299 | |
396a1ae6 TL |
300 | proxmox-installer (7.4-2) bullseye; urgency=medium |
301 | ||
302 | * d/control: depend on renamed and split-out proxmox-kernel-helper | |
303 | ||
304 | -- Proxmox Support Team <support@proxmox.com> Mon, 20 Mar 2023 21:15:56 +0100 | |
305 | ||
5fd83fe2 TL |
306 | proxmox-installer (7.4-1) bullseye; urgency=medium |
307 | ||
308 | * zfs: fix wrong command reference in error message | |
309 | ||
310 | * parition boot disk: use 1 GiB for ESP if root disk has 100+ GB space | |
311 | ||
312 | * fix #4430: allow users to select the UTC timezone | |
313 | ||
314 | -- Proxmox Support Team <support@proxmox.com> Thu, 16 Mar 2023 12:40:57 +0100 | |
315 | ||
3766f6ab TL |
316 | proxmox-installer (7.3-1) bullseye; urgency=medium |
317 | ||
ce8e7a45 | 318 | * lvm create: improve rounding of target root LV size by aligning it down to |
3766f6ab TL |
319 | the 4MB boundary to ensure that LVM doesn't try to over allocates by one |
320 | extent. | |
321 | ||
ce8e7a45 TL |
322 | * align computed swap size down to 4 MB to avoid oddly specific sizes and |
323 | issues with LVM rounding PEs up on creation | |
324 | ||
325 | * lvm create: leave 4 MB space unallocated space for small disks (<= 32GB) | |
326 | too | |
327 | ||
328 | -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2022 07:24:09 +0100 | |
3766f6ab | 329 | |
7bf9ff28 TL |
330 | proxmox-installer (7.2-3) bullseye; urgency=medium |
331 | ||
332 | * create lvm: improve rounding/alignment | |
333 | ||
334 | -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 16:51:40 +0100 | |
335 | ||
f1bde6ef TL |
336 | proxmox-installer (7.2-1) bullseye; urgency=medium |
337 | ||
338 | * zfs compression - fix wrongly added zle option | |
339 | ||
340 | * fix #4236: split disk space check into soft and hard limits, warn | |
341 | below 8 GB but only hard fail on 2 GB - which can never work | |
342 | ||
343 | * fine tune swap selection for low memory/space setups | |
344 | ||
345 | * lvm create: rework auto-space distribution and improve for low size | |
346 | setups. Avoid a per-default extra free space block if the disk has | |
347 | less than 32 GB of total space. Use the full rest size for root if | |
348 | it's below 12 GB, not much of a point in setting up a data thin LVM | |
349 | for guests then. Then also show a display message if no thin LVM is | |
350 | created to inform the admin. | |
351 | ||
352 | -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 10:44:33 +0100 | |
353 | ||
3aa883ea TL |
354 | proxmox-installer (7.1-2) bullseye; urgency=medium |
355 | ||
356 | * disks: raid: avoid restting hdsize when reopening options | |
357 | ||
358 | * drop trying to enable timesyncd, wrong since chrony switch & unnecessary | |
359 | anyway | |
360 | ||
361 | * remove /mnt/hostrun after install to avoid lingering directory | |
362 | ||
363 | -- Proxmox Support Team <support@proxmox.com> Thu, 28 Apr 2022 08:08:47 +0200 | |
364 | ||
5e299512 TL |
365 | proxmox-installer (7.1-1) bullseye; urgency=medium |
366 | ||
367 | * init: | |
368 | + add missing newline for chorny log message | |
369 | + add hint that GUI should start and where to find potential errors | |
370 | + do not sync on actual reboot, was already done after installation | |
371 | finished | |
372 | ||
373 | * proxmox-boot-preparation: add newline to /etc/kernel/cmdline | |
374 | ||
375 | * display disk size with 2 decimal places | |
376 | ||
377 | * zfs create: default to relatime | |
378 | ||
379 | * fix #3905: allow lze/gzip/zstd compression for ZFS | |
380 | ||
381 | * zfs: allow RAID0 with different-sized disks | |
382 | ||
383 | * fix #3188: update hdsize spin-button on disk-selection change | |
384 | ||
385 | * fix #3587: make hdsize configurable for btrfs setups | |
386 | ||
387 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Apr 2022 14:17:52 +0200 | |
388 | ||
0761f0a7 TL |
389 | proxmox-installer (7.0-7) bullseye; urgency=medium |
390 | ||
391 | * Revert "bridged network: set bridge HW-address to port one", to subtle to | |
392 | do as static configuration | |
393 | ||
394 | * avoid copying packages into ram, bind-mount into target chroot and extract | |
395 | directly | |
396 | ||
397 | * unconfigured: avoid doing the reset "sysrq" if possible, prefer a normal | |
398 | reboot system call. | |
399 | ||
400 | -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jul 2021 12:16:27 +0200 | |
401 | ||
8fc0b963 | 402 | proxmox-installer (7.0-6) bullseye; urgency=medium |
87da13d0 TL |
403 | |
404 | * bridged network: set bridge HW-address (MAC) to the one of the physical | |
405 | port | |
406 | ||
407 | * unconfigured: ifupdown is not used anymore, cope with that | |
408 | ||
409 | * unconfigured: do not unmount /dev to early on shutdown | |
410 | ||
411 | * unconfigured: only log about swap if there's actually one we can deactivate | |
412 | ||
8fc0b963 | 413 | -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jul 2021 13:21:09 +0200 |
87da13d0 | 414 | |
21d7be6e TL |
415 | proxmox-installer (7.0-4) bullseye; urgency=medium |
416 | ||
417 | * clean disk: sort blockdevs by length to clean depth-first | |
418 | ||
419 | * lvcreate: pass --yes to ensure wipesignatures is answered with go- | |
420 | for-it | |
421 | ||
422 | * try to make LVM less noisy regarding leaked file-descriptors | |
423 | ||
424 | * network: sync bridge option names with pve-common | |
425 | ||
426 | -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jun 2021 11:04:45 +0200 | |
427 | ||
f6af796e TL |
428 | proxmox-installer (7.0-3) bullseye; urgency=medium |
429 | ||
430 | * pid1: shutdown: send a more friendly TERM signal first | |
431 | ||
432 | * Proxmox VE: enable BTRFS support on installation as technology preview | |
433 | ||
434 | -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jun 2021 23:03:22 +0200 | |
435 | ||
c930ad75 TL |
436 | proxmox-installer (7.0-2) bullseye; urgency=medium |
437 | ||
438 | * lvm: always tell lvm to wipe the signatures | |
439 | ||
440 | * clean disk: pass all partitions separately to wipe2fs, as else it won't | |
441 | bother cleaning up child ones | |
442 | ||
443 | * disk preparation: make progress report for cleaning up disks slightly more | |
444 | granular | |
445 | ||
446 | * unconfigured: handle being the new PID 1 | |
447 | ||
448 | * unconfigured: heuristically detect high-dpi and adapt debugshell font and | |
449 | GDK_SCALE for the wizard in that case | |
450 | ||
451 | -- Proxmox Support Team <support@proxmox.com> Tue, 15 Jun 2021 15:07:04 +0200 | |
452 | ||
7bd5f9b4 TL |
453 | proxmox-installer (7.0-1) bullseye; urgency=medium |
454 | ||
455 | * unify installer packages into single binary-package | |
456 | ||
457 | * use wipefs to really clean the disks used for the root filesystem, as with | |
458 | wiping only the partions through sgdik, things like LVS refuse to operate | |
459 | if they find traces of existing LVs. | |
460 | ||
461 | * override grub default config via installer instead of separate grub | |
462 | package | |
463 | ||
464 | * re-build for Debian 11 Bullseye based releases | |
465 | ||
466 | -- Proxmox Support Team <support@proxmox.com> Tue, 25 May 2021 19:54:34 +0200 | |
467 | ||
61f260bf TL |
468 | pve-installer (6.4-2) pmg pve; urgency=medium |
469 | ||
470 | * zfs: assume that all devices are boot devices as firmware is weird and | |
471 | sometimes allows booting only from certain devices, which we cannot know | |
472 | here, and potentially only the boot partition could be corrupted/broken/... | |
473 | in which case another dev in the raid 0 could allow successful booting | |
474 | ||
475 | * legacy BIOS: boot ZFS indirectly using proxmox-boot-tool and the vfat based | |
476 | ESP as the primary boot partition to avoid issues with the ZFS | |
477 | implementation of GRUB. | |
478 | ||
479 | -- Proxmox Support Team <support@proxmox.com> Mon, 26 Apr 2021 18:53:55 +0200 | |
480 | ||
6d352d07 TL |
481 | pve-installer (6.4-1) pmg pve; urgency=medium |
482 | ||
483 | * fix #2518: disk selector: add "deselect all" button if there are | |
484 | more than three disks | |
485 | ||
486 | * avoid triggering keyboard layout auto-selection heuristic if it was | |
487 | changed explicitly | |
488 | ||
489 | * partially fix #2804: set debug-console keymap on language selection | |
490 | ||
491 | * fix #3223: fix hardcoded port value in success page html | |
492 | ||
493 | * fix #3165: start chrony after DHCP client for an opportunistic time-sync | |
494 | ||
811e0e6d | 495 | -- Proxmox Support Team <support@proxmox.com> Fri, 26 Mar 2021 19:47:08 +0100 |
6d352d07 | 496 | |
e93199d2 TL |
497 | pve-installer (6.3-2) pmg pve; urgency=medium |
498 | ||
499 | * minor spelling/grammar fixes all over the place | |
500 | ||
501 | * do not configure VT keyboard layout during installation, may hang the | |
502 | installer | |
503 | ||
504 | -- Proxmox Support Team <support@proxmox.com> Tue, 10 Nov 2020 15:03:14 +0100 | |
505 | ||
7dc66ff7 TL |
506 | pve-installer (6.3-1) pmg pve; urgency=medium |
507 | ||
508 | * fix #2925: edit /etc/kernel/cmdline unconditionally | |
509 | ||
510 | * set console keymap on language selection | |
511 | ||
512 | * fix #3057: remove ext3 option from installer | |
513 | ||
514 | * pbs: actually write out email to user.cfg | |
515 | ||
516 | * network: replace dot notation netmask with CIDR notation as primary input | |
517 | ||
518 | * fix #3093: allow one to automatically reboot on installation success | |
519 | ||
520 | -- Proxmox Support Team <support@proxmox.com> Sun, 08 Nov 2020 19:35:45 +0100 | |
521 | ||
86ebed3b TL |
522 | pve-installer (6.2-3) pmg pve; urgency=medium |
523 | ||
524 | * fix #2804: add a root shell on tty3 | |
525 | ||
526 | * pbs: update installation html texts | |
527 | ||
528 | -- Proxmox Support Team <support@proxmox.com> Tue, 07 Jul 2020 15:37:04 +0200 | |
529 | ||
ba0efb12 TL |
530 | pve-installer (6.2-2) pmg pve; urgency=medium |
531 | ||
532 | * write out network configuration in CIDR notation | |
533 | ||
534 | * create default DS | |
535 | ||
536 | -- Proxmox Support Team <support@proxmox.com> Mon, 25 May 2020 21:10:33 +0200 | |
537 | ||
c9605974 TL |
538 | pve-installer (6.2-1) pmg pve; urgency=medium |
539 | ||
540 | * unconfigured: don't trap "bad" debug-shell exits | |
541 | ||
542 | -- Proxmox Support Team <support@proxmox.com> Sun, 10 May 2020 21:21:10 +0200 | |
543 | ||
528e9761 TL |
544 | pve-installer (6.1-4) pmg pve; urgency=medium |
545 | ||
546 | * unconfigured: allow pseudo terminals, mount devpts | |
547 | ||
548 | * start installer window always in full screen mode | |
549 | ||
550 | * improve spice integration | |
551 | ||
552 | -- Proxmox Support Team <support@proxmox.com> Fri, 24 Apr 2020 19:40:23 +0200 | |
553 | ||
b2713661 TL |
554 | pve-installer (6.1-3) pmg pve; urgency=medium |
555 | ||
556 | * fix behavior if ZFS disks have no /dev/by-id path | |
557 | ||
558 | * restrict admin email to same format as the JSONSchema | |
559 | ||
560 | -- Proxmox Support Team <support@proxmox.com> Fri, 06 Mar 2020 10:57:49 +0100 | |
561 | ||
b3afd5d1 TL |
562 | pve-installer (6.1-2) pmg pve; urgency=medium |
563 | ||
564 | * add all ZFS vdevs with stable by-id device path | |
565 | ||
566 | * fix #1211: allow installation on 4k-native (4kn) disks booting with UEFI | |
567 | ||
568 | -- Proxmox Support Team <support@proxmox.com> Wed, 27 Nov 2019 19:20:45 +0100 | |
569 | ||
860f938d TL |
570 | pve-installer (6.1-1) pmg pve; urgency=medium |
571 | ||
572 | * raise postifx main.cf compatibility_level to 2 | |
573 | ||
574 | * ensure /etc/aliases.db is generated | |
575 | ||
576 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Nov 2019 10:35:42 +0100 | |
577 | ||
0b4a801d TL |
578 | pve-installer (6.0-9) pmg pve; urgency=medium |
579 | ||
580 | * fix #2313: load country.dat file with utf8 encoding | |
581 | ||
582 | -- Proxmox Support Team <support@proxmox.com> Sat, 17 Aug 2019 10:31:38 +0200 | |
583 | ||
be1a181e TL |
584 | pve-installer (6.0-8) pmg pve; urgency=medium |
585 | ||
586 | * success screen: show real final IP addr with port | |
587 | ||
588 | * handle bootloader installation errors gracefully | |
589 | ||
590 | * efiboot: remove redundant call to zz-pve-efiboot | |
591 | ||
592 | -- Proxmox Support Team <support@proxmox.com> Thu, 25 Jul 2019 12:40:37 +0200 | |
593 | ||
9b9ce0e2 TL |
594 | pve-installer (6.0-5) pmg pve; urgency=medium |
595 | ||
596 | * hd_list: skip all devices with iso9660 as FS | |
597 | ||
598 | * mount efivarfs to ensure we can read bigger EFI NVRAM backed variables | |
599 | ||
600 | * fix #1603: create a new and unique machine-id | |
601 | ||
602 | * copy /etc/hostid from installer root to target | |
603 | ||
604 | * prompt user if a vgrename is OK for exisiting 'pve'/'pmg' VGs | |
605 | ||
606 | * use pve-efiboot-tool for systemd boot ESP preparation | |
607 | ||
608 | -- Proxmox Support Team <support@proxmox.com> Thu, 11 Jul 2019 19:22:31 +0200 | |
609 | ||
0fbecc5e TL |
610 | pve-installer (6.0-4) pmg pve; urgency=medium |
611 | ||
612 | * update systemd-boot config after initializing esps | |
613 | ||
614 | * clear zpool labels on selected disks' partitions | |
615 | ||
616 | * use by-id diskpath for zpool create | |
617 | ||
618 | * warn if host memory is less than 1 GB | |
619 | ||
620 | -- Proxmox Support Team <support@proxmox.com> Thu, 04 Jul 2019 18:10:06 +0200 | |
621 | ||
1cd1a8b9 TL |
622 | pve-installer (6.0-3) pmg pve; urgency=medium |
623 | ||
624 | * add support for ZFS on EFI | |
625 | ||
626 | -- Proxmox Support Team <support@proxmox.com> Fri, 28 Jun 2019 14:03:21 +0200 | |
627 | ||
5da2ffd1 TL |
628 | pve-installer (6.0-2) pmg pve; urgency=medium |
629 | ||
630 | * add note regarding issues with ZFS on HW raid controller | |
631 | ||
632 | -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 10:27:54 +0200 | |
633 | ||
c5c6fe94 TL |
634 | pve-installer (6.0-1) pmg pve; urgency=medium |
635 | ||
636 | * bump for Debian Buster | |
637 | ||
638 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2019 10:02:08 +0200 | |
639 | ||
89aa55e2 TL |
640 | pve-installer (5.0-26) unstable; urgency=medium |
641 | ||
642 | * ipconf view: only (re)set fields if nic really changed | |
643 | ||
644 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2019 14:39:35 +0100 | |
645 | ||
e5ef2909 TL |
646 | pve-installer (5.0-25) unstable; urgency=medium |
647 | ||
648 | * add support for Citrix Hypervisor blockdev | |
649 | ||
650 | * Fix #2009: Recreate hdsize_adj with new hdsize | |
651 | ||
652 | * implement previous button | |
653 | ||
654 | * implement summary/acknowledgement screen | |
655 | ||
656 | -- Proxmox Support Team <support@proxmox.com> Thu, 14 Mar 2019 16:36:13 +0100 | |
657 | ||
f20832ec TL |
658 | pve-installer (5.0-24) unstable; urgency=medium |
659 | ||
660 | * change last button to 'Install' | |
661 | ||
662 | * Reset adjustment for spinbutton_hdsize | |
663 | ||
664 | -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2018 16:09:14 +0100 | |
665 | ||
702e9890 TL |
666 | pve-installer (5.0-23) unstable; urgency=medium |
667 | ||
668 | * do not create a swap zvol | |
669 | ||
670 | * unify and adapt disk partitioning | |
671 | ||
672 | * fix #1527: Use 'iso-codes' package country naming | |
673 | ||
674 | * allow more than 26 SCSI disk devices. | |
675 | ||
676 | * fix various grammar and spelling errors | |
677 | ||
678 | -- Proxmox Support Team <support@proxmox.com> Fri, 23 Nov 2018 09:49:44 +0100 | |
679 | ||
af0245d1 FG |
680 | pve-installer (5.0-22) unstable; urgency=medium |
681 | ||
682 | * fix #1241: ensure at least 1G of thinpool metadata | |
683 | ||
684 | * handle swapsize=0 correctly | |
685 | ||
686 | * handle maxvz=0 correctly | |
687 | ||
688 | * handle minfree=0 correctly | |
689 | ||
690 | * handle local-only LVM setup | |
691 | ||
692 | -- Proxmox Support Team <support@proxmox.com> Fri, 11 May 2018 13:17:42 +0200 | |
693 | ||
b55d21e5 DM |
694 | pve-installer (5.0-21) unstable; urgency=medium |
695 | ||
696 | * ipconf.htm: remove pve product name | |
697 | ||
698 | -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 07:57:26 +0100 | |
699 | ||
ed956793 DM |
700 | pve-installer (5.0-20) unstable; urgency=medium |
701 | ||
702 | * proxinstall: only display option maxroot for product pve | |
703 | ||
704 | -- Proxmox Support Team <support@proxmox.com> Fri, 22 Dec 2017 07:43:41 +0100 | |
705 | ||
7d865b96 DM |
706 | pve-installer (5.0-19) unstable; urgency=medium |
707 | ||
708 | * allow all valid netmasks | |
709 | ||
710 | * html-pmg/extract1-license.htm: fix typo | |
711 | ||
712 | -- Proxmox Support Team <support@proxmox.com> Thu, 14 Dec 2017 11:19:10 +0100 | |
713 | ||
85cb5a90 DM |
714 | pve-installer (5.0-18) unstable; urgency=medium |
715 | ||
716 | * proxinstall - only creat ezfs data pool for product pve | |
717 | ||
718 | -- Proxmox Support Team <support@proxmox.com> Thu, 23 Nov 2017 09:53:18 +0100 | |
719 | ||
0c9c14e2 DM |
720 | pve-installer (5.0-17) unstable; urgency=medium |
721 | ||
722 | * include svg files for installer banner | |
723 | ||
724 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 13:12:25 +0100 | |
725 | ||
dd3eeeab DM |
726 | pve-installer (5.0-16) unstable; urgency=medium |
727 | ||
728 | * pmg: fix lvm volume sizes | |
729 | ||
730 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 10:26:38 +0100 | |
731 | ||
1ec71724 DM |
732 | pve-installer (5.0-15) unstable; urgency=medium |
733 | ||
734 | * dispaly info pages for 15 seconds | |
735 | ||
736 | * Revert "change clamav daily database name to daily.cld" | |
737 | ||
738 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 09:29:16 +0100 | |
739 | ||
96d83f35 DM |
740 | pve-installer (5.0-14) unstable; urgency=medium |
741 | ||
742 | * correctly set PermitRootLogin in sshd_config | |
743 | ||
744 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 14:15:16 +0100 | |
745 | ||
4c2b1ec1 DM |
746 | pve-installer (5.0-13) unstable; urgency=medium |
747 | ||
748 | * change clamav daily database name to daily.cld | |
749 | ||
750 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 12:31:13 +0100 | |
751 | ||
5993c2ad DM |
752 | pve-installer (5.0-12) unstable; urgency=medium |
753 | ||
754 | * pmg: write admin email to /etc/pmg/pmg.conf | |
755 | ||
756 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 10:26:59 +0100 | |
757 | ||
9ae645db DM |
758 | pve-installer (5.0-11) unstable; urgency=medium |
759 | ||
760 | * pmg: write user.conf to correct location | |
761 | ||
762 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 09:56:40 +0100 | |
763 | ||
5e49692c DM |
764 | pve-installer (5.0-10) unstable; urgency=medium |
765 | ||
766 | * bump version for testing | |
767 | ||
768 | * implement proxmox mail gateway installation | |
769 | ||
770 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 08:05:02 +0100 | |
771 | ||
a8213c0e DM |
772 | pve-installer (5.0-8) unstable; urgency=medium |
773 | ||
774 | * add support for multiple products (pve, pmg) | |
775 | ||
776 | -- Proxmox Support Team <support@proxmox.com> Mon, 20 Nov 2017 12:47:44 +0100 | |
777 | ||
971d9294 FG |
778 | pve-installer (5.0-7) unstable; urgency=medium |
779 | ||
780 | * kill dhclient before rebooting | |
781 | ||
782 | * ZFS: explicitly export rpool after installation | |
783 | ||
784 | * fix #1479: detect missing KVM support | |
785 | ||
786 | -- Proxmox Support Team <support@proxmox.com> Thu, 19 Oct 2017 10:56:30 +0200 | |
787 | ||
53351632 FG |
788 | pve-installer (5.0-6) unstable; urgency=medium |
789 | ||
790 | * fix console-setup | |
791 | ||
792 | -- Proxmox Support Team <support@proxmox.com> Thu, 10 Aug 2017 13:58:22 +0200 | |
793 | ||
b19f719f FG |
794 | pve-installer (5.0-5) unstable; urgency=medium |
795 | ||
796 | * allow installing without active network devices | |
797 | ||
798 | * fix bug in handling of invalid GeoIP results | |
799 | ||
800 | -- Proxmox Support Team <support@proxmox.com> Wed, 9 Aug 2017 09:41:36 +0200 | |
801 | ||
bba8f763 FG |
802 | pve-installer (5.0-4) unstable; urgency=medium |
803 | ||
804 | * rework password and email text | |
805 | ||
806 | -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jun 2017 09:49:38 +0200 | |
807 | ||
67d55cde FG |
808 | pve-installer (5.0-3) unstable; urgency=medium |
809 | ||
810 | * let raid dialogue grow if > 4 disks | |
811 | ||
812 | * add initial check for NICs | |
813 | ||
814 | * ignore link-local addresses | |
815 | ||
816 | * clean disks prior to formatting | |
817 | ||
818 | * explicitly mount ESP as vfat | |
819 | ||
820 | * zero start of partitions after formatting disk | |
821 | ||
822 | * fix XFS mount options | |
823 | ||
824 | -- Proxmox Support Team <support@proxmox.com> Fri, 5 May 2017 12:11:22 +0200 | |
825 | ||
4f0241f1 FG |
826 | pve-installer (5.0-2) unstable; urgency=medium |
827 | ||
828 | * always select a NIC, even if DHCP fails | |
829 | ||
830 | -- Proxmox Support Team <support@proxmox.com> Tue, 14 Mar 2017 09:44:30 +0100 | |
831 | ||
64c46db3 FG |
832 | pve-installer (5.0-1) unstable; urgency=medium |
833 | ||
834 | * rebuild for PVE 5.0 | |
835 | ||
836 | * fix #1239: enhance swap on ZFS setup | |
837 | ||
838 | * use iproute2, support interface selection | |
839 | ||
840 | * get DHCP leases on all interfaces | |
841 | ||
842 | * only require grub-efi to succeed if booted using UEFI | |
843 | ||
844 | -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 13:03:43 +0100 | |
845 | ||
56635b97 DM |
846 | pve-installer (4.0-16) unstable; urgency=medium |
847 | ||
848 | * actually use more than 8 disks if selected | |
849 | ||
850 | -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2016 10:05:54 +0100 | |
851 | ||
f29589b4 DM |
852 | pve-installer (4.0-15) unstable; urgency=medium |
853 | ||
854 | * use explicit partition starts | |
855 | ||
856 | * bump EFI partition size to 256M | |
857 | ||
858 | * compute_swapsize: add return statement | |
859 | ||
860 | -- Proxmox Support Team <support@proxmox.com> Tue, 13 Dec 2016 09:12:20 +0100 | |
861 | ||
bb77a307 DM |
862 | pve-installer (4.0-14) unstable; urgency=medium |
863 | ||
864 | * bump version for new RELEASE=4.4 | |
865 | ||
866 | -- Proxmox Support Team <support@proxmox.com> Fri, 09 Dec 2016 12:03:00 +0100 | |
867 | ||
56445ecb DM |
868 | pve-installer (4.0-13) unstable; urgency=medium |
869 | ||
870 | * add default invalid mail address | |
871 | ||
872 | * refactor disk setup | |
873 | ||
874 | * add advanced ZFS options | |
875 | ||
876 | * fix #1190: allow ZFS mirrors with slightly different sizes | |
877 | ||
878 | -- Proxmox Support Team <support@proxmox.com> Mon, 05 Dec 2016 10:48:19 +0100 | |
879 | ||
77ebccb1 DM |
880 | pve-installer (4.0-12) unstable; urgency=medium |
881 | ||
882 | * fix update_progress while extracting files | |
883 | ||
884 | * assume root file system is writable (overlayfs) | |
885 | ||
886 | -- Proxmox Support Team <support@proxmox.com> Wed, 21 Sep 2016 13:12:33 +0200 | |
887 | ||
e11d96aa DM |
888 | pve-installer (4.0-11) unstable; urgency=medium |
889 | ||
890 | * use unsquashfs instead of tar | |
891 | ||
892 | -- Proxmox Support Team <support@proxmox.com> Wed, 31 Aug 2016 08:49:30 +0200 | |
893 | ||
26f89221 DM |
894 | pve-installer (4.0-10) unstable; urgency=medium |
895 | ||
896 | * Fix #1054: error on purely numeric hostnames | |
897 | ||
898 | * update layout, use new logo | |
899 | ||
900 | -- Proxmox Support Team <support@proxmox.com> Tue, 09 Aug 2016 09:46:31 +0200 | |
901 | ||
3885481c DM |
902 | pve-installer (4.0-8) unstable; urgency=medium |
903 | ||
904 | * restrict hdsize if requested | |
905 | ||
906 | -- Proxmox Support Team <support@proxmox.com> Sun, 06 Mar 2016 09:04:44 +0100 | |
907 | ||
5fd81672 DM |
908 | pve-installer (4.0-7) unstable; urgency=medium |
909 | ||
910 | * use lvmthin for data volume | |
911 | ||
912 | * create zfs subpool (rpool/data) as VM/CT storage | |
913 | ||
914 | * create better default storage configiguration | |
915 | ||
916 | -- Proxmox Support Team <support@proxmox.com> Tue, 01 Mar 2016 07:16:16 +0100 | |
917 | ||
0ee3ef41 DM |
918 | pve-installer (4.0-6) unstable; urgency=medium |
919 | ||
920 | * install EFI fallback boot file (OVMF does not boot without) | |
921 | ||
922 | -- Proxmox Support Team <support@proxmox.com> Thu, 10 Dec 2015 10:39:46 +0100 | |
923 | ||
6b5dc3d0 DM |
924 | pve-installer (4.0-5) unstable; urgency=medium |
925 | ||
036475a0 DM |
926 | * allow up to 8 zfs disks |
927 | ||
6b5dc3d0 DM |
928 | * enable systemd-timesyncd.service by default |
929 | ||
930 | -- Proxmox Support Team <support@proxmox.com> Fri, 20 Nov 2015 09:07:20 +0100 | |
931 | ||
1143023f DM |
932 | pve-installer (4.0-4) unstable; urgency=medium |
933 | ||
934 | * add ipv6 support | |
935 | ||
936 | -- Proxmox Support Team <support@proxmox.com> Tue, 06 Oct 2015 08:22:45 +0200 | |
937 | ||
ccac1881 DM |
938 | pve-installer (4.0-3) unstable; urgency=medium |
939 | ||
940 | * zpool create: use cachefile=none | |
941 | ||
942 | * do not mention LVM snapshots | |
943 | ||
944 | -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2015 12:17:57 +0200 | |
945 | ||
df482fe5 DM |
946 | pve-installer (4.0-2) unstable; urgency=medium |
947 | ||
948 | * add xfs support | |
949 | ||
950 | -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:57:06 +0200 | |
951 | ||
952 | pve-installer (4.0-1) unstable; urgency=medium | |
953 | ||
954 | * updates for debian jessie | |
955 | ||
956 | -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:56:54 +0200 | |
957 | ||
71eb60d6 DM |
958 | pve-installer (3.3-3) unstable; urgency=low |
959 | ||
960 | * support ZFS | |
961 | ||
962 | -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jan 2015 09:39:28 +0100 | |
963 | ||
84761f93 DM |
964 | pve-installer (3.3-2) unstable; urgency=low |
965 | ||
966 | * support UEFI systems | |
aed81ff0 DM |
967 | |
968 | * add new 'Options' Dialog | |
84761f93 DM |
969 | |
970 | * do not install xorg.conf (not needed, and makes problems with EFI boot) | |
971 | ||
972 | -- Proxmox Support Team <support@proxmox.com> Wed, 01 Oct 2014 09:16:03 +0200 | |
973 | ||
cd0cff32 DM |
974 | pve-installer (3.3-1) unstable; urgency=low |
975 | ||
976 | * update path for 3.3 release | |
977 | ||
978 | -- Proxmox Support Team <support@proxmox.com> Mon, 08 Sep 2014 12:08:14 +0200 | |
979 | ||
980 | pve-installer (3.0-2) unstable; urgency=low | |
981 | ||
982 | * always use GUID partition tables | |
983 | ||
984 | -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jan 2014 16:00:25 +0100 | |
985 | ||
24396f40 DM |
986 | pve-installer (3.0-1) unstable; urgency=low |
987 | ||
988 | * updates for debian wheezy | |
989 | ||
990 | * use webkit instead of gthhtml2 | |
991 | ||
992 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2013 06:39:42 +0100 | |
993 | ||
87a09334 DM |
994 | pve-installer (2.3-6) unstable; urgency=low |
995 | ||
996 | * fix hdsize algorythm | |
997 | ||
998 | -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 10:32:00 +0100 | |
999 | ||
968fa90b DM |
1000 | pve-installer (2.0-5) unstable; urgency=low |
1001 | ||
1002 | * add 'hdsize' boot parameter to specify maximum size used. | |
1003 | ||
1004 | -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2012 06:18:55 +0100 | |
1005 | ||
89092156 DM |
1006 | pve-installer (2.0-4) unstable; urgency=low |
1007 | ||
1008 | * fix bug #226 && #227: new minfree and maxvz boot options | |
1009 | ||
1010 | -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jul 2012 05:51:47 +0200 | |
1011 | ||
5586cedd DM |
1012 | pve-installer (2.0-3) unstable; urgency=low |
1013 | ||
1014 | * increase free space on LVM up to 16GB | |
1015 | ||
1016 | -- Proxmox Support Team <support@proxmox.com> Thu, 16 Feb 2012 11:59:55 +0100 | |
1017 | ||
89a12446 DM |
1018 | pve-installer (2.0-2) unstable; urgency=low |
1019 | ||
1020 | * support new kernel parameter 'ext4' switch (use ext4 instead of ext3) | |
1021 | ||
1022 | * use 'ext3' by default | |
1023 | ||
1024 | -- Proxmox Support Team <support@proxmox.com> Thu, 04 Aug 2011 12:58:27 +0200 | |
1025 | ||
1026 | pve-installer (2.0-1) unstable; urgency=low | |
1027 | ||
1028 | * use ext4 fs | |
1029 | ||
1030 | * align LVM on 128k boundary | |
1031 | ||
1032 | * use 'parted' to create partitions | |
1033 | ||
1034 | * support > 2TB disks (use GPT partition tables) | |
1035 | ||
1036 | * mount with barrier=0 during install (speedup) | |
1037 | ||
1038 | * write keyboard settings to /etc/pve-installer.cfg | |
1039 | ||
1040 | * adjust for pve2 | |
1041 | ||
1042 | * avoid to run update-grub or update-initramfs during install | |
1043 | ||
1044 | * use --no-triggers for faster unpack | |
1045 | ||
1046 | * also mount sysfs to /target/sys | |
1047 | ||
1048 | * do not write /etc/default/grub - not really needed | |
1049 | ||
1050 | * we now use openbox instead of metacity | |
1051 | ||
1052 | * wait one second after partitioning (give kernel time to reread part | |
1053 | table) | |
1054 | ||
1055 | * use update-initramfs -c (instead of -u) | |
1056 | ||
1057 | * do not write /etc/apache2/ports.conf (not really needed) | |
1058 | ||
1059 | * enable apache port redirect (a2ensite pve-redirect.conf) | |
1060 | ||
1061 | -- Proxmox Support Team <support@proxmox.com> Mon, 15 Feb 2010 14:09:46 +0100 | |
1062 | ||
1063 | pve-installer (1.0-9) unstable; urgency=low | |
1064 | ||
1065 | * fix netmask bug | |
1066 | ||
1067 | * use 'udevadm info' to detect disks | |
1068 | ||
1069 | -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:13:11 +0100 | |
1070 | ||
1071 | pve-installer (1.0-8) unstable; urgency=low | |
1072 | ||
1073 | * use UUID= for /boot in fstab | |
1074 | ||
1075 | -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:11:58 +0100 | |
1076 | ||
1077 | pve-installer (1.0-7) unstable; urgency=low | |
1078 | ||
1079 | * unconfigured.sh: use -q flag for modprobe | |
1080 | ||
1081 | * proxinstall: use 'removable' flag on older kernels (instead | |
1082 | of 'capability') to detect cdroms. | |
1083 | ||
1084 | -- Proxmox Support Team <support@proxmox.com> Fri, 04 Dec 2009 18:03:59 +0100 | |
1085 | ||
1086 | pve-installer (1.0-6) unstable; urgency=low | |
1087 | ||
1088 | * pass --no-floppy to grub-install (some users reported delays) | |
1089 | ||
1090 | -- Proxmox Support Team <support@proxmox.com> Fri, 19 Jun 2009 10:48:37 +0200 | |
1091 | ||
1092 | pve-installer (1.0-5) unstable; urgency=low | |
1093 | ||
1094 | * fixes for debian lenny | |
1095 | ||
1096 | * support dynamically allocated virtio blk devices | |
1097 | ||
1098 | -- Proxmox Support Team <support@proxmox.com> Fri, 08 May 2009 16:53:42 +0200 | |
1099 | ||
1100 | pve-installer (1.0-4) unstable; urgency=low | |
1101 | ||
1102 | * proxinstall: better postfix configuration | |
1103 | ||
1104 | -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jan 2009 12:21:13 +0100 | |
1105 | ||
1106 | pve-installer (1.0-3) unstable; urgency=low | |
1107 | ||
1108 | * ause grub instead of lilo | |
1109 | ||
1110 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Aug 2008 14:39:57 +0200 | |
1111 | ||
1112 | pve-installer (1.0-2) stable; urgency=low | |
1113 | ||
1114 | * proxinstall (extract_data): added maxroot and swapsize boot parameters, | |
1115 | set bridge parameters (stp = on, fd = 0) | |
1116 | ||
1117 | -- Proxmox Support Team <support@proxmox.com> Tue, 8 Jul 2008 06:54:03 +0200 | |
1118 | ||
1119 | pve-installer (1.0-1) stable; urgency=low | |
1120 | ||
1121 | * initial release | |
1122 | ||
1123 | -- Proxmox Support Team <support@proxmox.com> Mon, 19 Nov 2007 15:48:05 +0100 | |
1124 |