projects / mirror_ubuntu-artful-kernel.git / blame
| Commit | Line | Data |
|---|---|---|
| 868545ed PP |
1 | linux-snapdragon (4.4.0-1008.8) UNRELEASED; urgency=low |
| 2 | ||
| 3 | CHANGELOG: Do not edit directly. Autogenerated at release. | |
| 4 | CHANGELOG: Use the printchanges target to see the curent changes. | |
| 5 | CHANGELOG: Use the insertchanges target to create the final log. | |
| 6 | ||
| 7 | -- Paolo Pisati <paolo.pisati@canonical.com> Thu, 10 Mar 2016 11:16:08 +0100 | |
| 8 | ||
| 40e92b0b | 9 | linux-snapdragon (4.4.0-1007.7) xenial; urgency=low |
| 2e39b469 | 10 | |
| 40e92b0b PP |
11 | [ Paolo Pisati ] |
| 12 | ||
| 13 | * Rebased on Ubuntu-4.4.0-10.25 | |
| 14 | ||
| 15 | * need arm64 acpi parking protocol support in xenial (LP: #1547047) | |
| 16 | - arm64: kernel: implement ACPI parking protocol | |
| 17 | ||
| 18 | * Miscellaneous Ubuntu changes | |
| 19 | - [Config] ARM64_ACPI_PARKING_PROTOCOL=y | |
| 2e39b469 PP |
20 | |
| 21 | -- Paolo Pisati <paolo.pisati@canonical.com> Mon, 07 Mar 2016 15:57:39 +0100 | |
| 22 | ||
| 20f0b1ec | 23 | linux-snapdragon (4.4.0-1006.6) xenial; urgency=low |
| da39c9cf | 24 | |
| 20f0b1ec PP |
25 | [ Paolo Pisati ] |
| 26 | ||
| 27 | * Updated qcomlt-4.4 BSP @ 86e3204d9 | |
| 28 | * Rebased on Ubuntu-4.4.0-6.21 | |
| 29 | ||
| 30 | * Miscellaneous Ubuntu changes | |
| 31 | - [Config] updateconfigs | |
| 32 | ||
| 33 | * Miscellaneous upstream changes | |
| 34 | - ASoC: qcom: use snd_dma_alloc/free* apis | |
| 35 | - ASoC: qcom: add wrdma register details to lpass_variant | |
| 36 | - ASoC: qcom: rename rdmactl_audif_start to dmactrl_audif_start | |
| 37 | - ASoC: qcom: pass direction to dma allocation | |
| 38 | - ASoC: qcom: ipq806x: add error in dma allocation. | |
| 39 | - ASoC: qcom: ipq806x: add wrdma related register offsets | |
| 40 | - ASoC: qcom: add mic related i2s control register defines | |
| 41 | - ASoC: qcom: add wrdma dma channel start | |
| 42 | - ASoC: qcom: rename rdma_ch_bit_map to dma_ch_bit_map | |
| 43 | - ASoC: qcom: apq8016: add wrdma support | |
| 44 | - ASoC: qcom: add wrdma register definations | |
| 45 | - ASoC: qcom: add generic bit masks for RDMA and WRDMA | |
| 46 | - ASoC: qcom: apq8016: set the correct max register for regmap | |
| 47 | - ASoC: qcom: add mic support | |
| 48 | - ASoC: qcom: apq8016-sbc: add mic support | |
| 49 | - ASoC: add audio routing support | |
| 50 | - arm64: dts: qcom: add audio capture support | |
| 51 | - drm/i2c: adv7511: Add HPD support | |
| 52 | - arm64: dts: qcom: apq8016-sbc: Enable ADV7533 interrupts | |
| 53 | - dts: arm64: qcom: remove dmic pins in default pinctrl | |
| 54 | - ASoC: codec: msm8x16: check return value of msm8x16_wcd_codec_parse_dt | |
| 55 | - ASoC: codec: msm8x16: enable regulators before accessing registers | |
| 56 | - drm/msm: Boost the GPU clock on msm8916 for better performance | |
| 57 | - firmware: qcom: scm: Convert to platform driver | |
| 58 | - firmware: scm: make scm_init call from probe | |
| 59 | - arm64: dts: qcom : add scm device node | |
| 60 | - firmware: scm: make scm clks optional | |
| 61 | - arm: dts: qcom : add scm device node | |
| 62 | - iommu: qcom: check scm avaiablity before initialization. | |
| 63 | - ARM: dts: ifc6410: remove pinctrl defaults from gpio node. | |
| da39c9cf PP |
64 | |
| 65 | -- Paolo Pisati <paolo.pisati@canonical.com> Fri, 26 Feb 2016 14:39:48 +0100 | |
| 66 | ||
| 583f75b6 | 67 | linux-snapdragon (4.4.0-1005.5) xenial; urgency=low |
| e91c3819 | 68 | |
| 583f75b6 PP |
69 | [ Paolo Pisati ] |
| 70 | ||
| 71 | * SAUCE: dtb: add a custom apq8016 for snappy with sdhc_2's vmmc-supply | |
| 72 | disabled | |
| e91c3819 PP |
73 | |
| 74 | -- Paolo Pisati <paolo.pisati@canonical.com> Fri, 19 Feb 2016 13:34:25 +0100 | |
| 75 | ||
| 91be654c | 76 | linux-snapdragon (4.4.0-1004.4) xenial; urgency=low |
| 2e526272 | 77 | |
| 91be654c PP |
78 | [ Paolo Pisati ] |
| 79 | ||
| 80 | * [Config] MMC_BLOCK_MINORS=32 | |
| 2e526272 PP |
81 | |
| 82 | -- Paolo Pisati <paolo.pisati@canonical.com> Tue, 09 Feb 2016 10:27:30 +0100 | |
| 83 | ||
| d1477dbb | 84 | linux-snapdragon (4.4.0-1003.3) xenial; urgency=low |
| f0cea59c | 85 | |
| d1477dbb PP |
86 | [ Upstream Kernel Changes ] |
| 87 | ||
| 88 | * arm64: dts: qcom: fix typo in usb id pins | |
| 89 | * usb: phy: msm: Fix state machine worker logic for OTG mode. | |
| f0cea59c PP |
90 | |
| 91 | -- Paolo Pisati <paolo.pisati@canonical.com> Fri, 05 Feb 2016 14:38:07 +0100 | |
| 92 | ||
| 74135a23 | 93 | linux-snapdragon (4.4.0-1002.2) xenial; urgency=low |
| be186804 | 94 | |
| 74135a23 PP |
95 | [ Paolo Pisati ] |
| 96 | ||
| 97 | * [Config] copy annotations from master | |
| 98 | * [Config] updateconfigs | |
| 99 | * [Config] better align config with qcomlt-4.4 | |
| 100 | * [Config] FTBFS: disable DRM_PANEL_SIMPLE | |
| be186804 PP |
101 | |
| 102 | -- Paolo Pisati <paolo.pisati@canonical.com> Thu, 04 Feb 2016 17:21:00 +0100 | |
| 103 | ||
| 4004fa98 | 104 | linux-snapdragon (4.4.0-1001.1) xenial; urgency=low |
| 11dd2ff3 | 105 | |
| 4004fa98 PP |
106 | [ Paolo Pisati ] |
| 107 | ||
| 108 | * Imported http://git.linaro.org/landing-teams/working/qualcomm/kernel.git - qcomlt-4.4 @ 17a6dbb | |
| 109 | * Rebased on Ubuntu-4.4.0-2.16 | |
| 110 | ||
| 111 | [ Upstream Kernel Changes ] | |
| 112 | ||
| 113 | * mmc: mmci: Support any block sizes for ux500v2 and qcom variant | |
| 114 | * hid: add support for Lilliput touchscreen | |
| 115 | * ARM: qcom_defconfig: Add QCOM specific drivers | |
| 116 | * arm:multi_v7_defconfig: Add QCOM specific Kconfigs | |
| 117 | * WIP:pwrseq: Convert in to proper platform device | |
| 118 | * iommu:msm: fix compilation error. | |
| 119 | * Input: pm8941: Add RESIN_N input handling | |
| 120 | * media: v4l2-controls: add h264 5.2 level and constrained high profile | |
| 121 | * media: vidc: Qualcomm video encoder/decoder driver | |
| 122 | * PCI: designware: add memory barrier after enabling region | |
| 123 | * DT: PCI: qcom: Document PCIe devicetree bindings | |
| 124 | * PCI: qcom: Add Qualcomm PCIe controller driver | |
| 125 | * drm/edid: Add support to get edid early | |
| 126 | * drm/edid: export edid_vendor() | |
| 127 | * drm/panel: simple-panel: Add panel picker support. | |
| 128 | * drm/msm: mdp4 lvds: continue if the panel is not connected | |
| 129 | * drm/msm: mdp4 lvds: Check the panel node in detect_panel() | |
| 130 | * devicetree: Add hardware rng entry to qcom-apq8064.dtsi | |
| 131 | * ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes | |
| 132 | * ARM: dts: qcom: apq8064: Declare all pm8921 regulators | |
| 133 | * ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node | |
| 134 | * arm: dts: qcom: Add generic PMIC gpio/MPP compat strings | |
| 135 | * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators | |
| 136 | * ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6 | |
| 137 | * ARM: dts: apq8064: add pcie devicetree node | |
| 138 | * ARM: dts: ifc6410: enable pcie dt node for this board | |
| 139 | * ARM: dts: apq8064: Add MDP support | |
| 140 | * ARM: dts: ifc6410: enable MDP support | |
| 141 | * ARM: dts: qs600: enable MDP support | |
| 142 | * ARM: dts: ifc6410: add inforce LVDS panel support | |
| 143 | * ARM: dts: APQ8064: Add iommu | |
| 144 | * ARM: dts: apq8064: add pci support in CM QS600 | |
| 145 | * ARM: dts: qcom: Add necessary DT data for Krait cpufreq | |
| 146 | * ARM: qcom: add description of KPSS WDT for APQ8064 | |
| 147 | * ARM: dts: apq8064: Assign a power supply to each CPU | |
| 148 | * ARM: dts: apq8064: Add OPP data for frequencies above 1ghz | |
| 149 | * ARM: dts: apq8064: Add thermal cooling maps | |
| 150 | * ARM: dts: apq8064: Add voltage ranges of the SAW2 regulators | |
| 151 | * ARM: dts: apq8064: Add reference to the L2 clock | |
| 152 | * ARM: dts: apq8064: Add a DT node for the L2 data | |
| 153 | * ARM: dts: apq8064: Add ADM configuration node | |
| 154 | * arm: dts: Added eInfochips ERAGON600 board support | |
| 155 | * ARM: dts: ifc6410: HACK add bt reset gpios to pwrseq | |
| 156 | * ARM: dts: apq8064: Increase critical temperature to 110C | |
| 157 | * arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes | |
| 158 | * arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations | |
| 159 | * arm64: dts: qcom: 8x16: UART1 and UART2 use DMA for RX and TX | |
| 160 | * arm64: dts: qcom: Make msm8916-mtp compatible string compliant | |
| 161 | * arm64: dts: qcom: Alias pm8916 on msm8916 devices | |
| 162 | * arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators | |
| 163 | * arm64: dts: fix the i2c aliasing to match to schematics. | |
| 164 | * arm64: dts: set the default i2c pin drive strength to 16mA | |
| 165 | * arm64: dts: qcom: Add MSM8916 SMEM nodes | |
| 166 | * arm64: dts: qcom: Add RPM/SMD support on MSM8916 | |
| 167 | * arm64: dts: Add PM8916 support on MSM8916 | |
| 168 | * arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons | |
| 169 | * arm64: dts: qcom: Add pm8994 gpios and MPPs | |
| 170 | * arm64: dts: apq8016-sbc: enable UART0 on LS connector | |
| 171 | * arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI | |
| 172 | * devicetree: bindings: Document qcom,msm-id and qcom,board-id | |
| 173 | * arm64: dts: Add Qualcomm MSM8916 & MTP8916 ids | |
| 174 | * DT: arm64: msm8916-mtp: enable spi3 | |
| 175 | * arm64: dts: qcom: Add APQ8016 SBC support | |
| 176 | * arm64: dts: qcom: Add USB related device nodes on APQ8016 SBC board | |
| 177 | * arm64: dts: qcom: Add sdhci support for APQ8016 SBC board | |
| 178 | * arm64: dts: Add nodes we need for SMP boot | |
| 179 | * ARM: dts: Enable SD card (disable vmcc) | |
| 180 | * arm64: msm8916 dtsi: Add mdss support | |
| 181 | * arm64: sb8016: Add ADV7533 bridge in sbc8016 dtsi | |
| 182 | * arm64: dts: Add apq8016-sbc hdmi audio support | |
| 183 | * arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins | |
| 184 | * arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions | |
| 185 | * arm64: dts: qcom: apq8016-sbc: add D+/D- route switch GPIO | |
| 186 | * arm64: dts: qcom: apq8016-sbc: Fix sdhci pinctrl default state name | |
| 187 | * arm64: dts: qcom: apq8016-sbc: Enable SD card slot | |
| 188 | * arm64: dts: qcom: Fix MPP's function used for LED control | |
| 189 | * arm64: dts: qcom: Enable USB manual pullup on msm8916 | |
| 190 | * arm64: dts: qcom: msm8916: Add RPMCC DT node | |
| 191 | * arm64: dts: qcom: msm8916: Add A53 DT node | |
| 192 | * arm64: dts: Add cpufreq-dt support for msm8916 | |
| 193 | * arm64: dts: Add clock-latency for msm8916 | |
| 194 | * arm64: dts: Add CPR DT node for msm8916 | |
| 195 | * arm64: dts: Add cpu-supply properties for cpufreq | |
| 196 | * arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes | |
| 197 | * arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes | |
| 198 | * arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes | |
| 199 | * arm64: dts: Add spmi-regulator nodes for pm8916 | |
| 200 | * arm64: dts: msm8916: Add cpu cooling maps | |
| 201 | * WIP: dt: add support for gpu on msm8916/apq8016 | |
| 202 | * DT: arm64: add iommu dtsi files | |
| 203 | * arm64: dt: Add WCNSS related nodes | |
| 204 | * dts: arm64: apq8016-sbc: enable LS 1.8v regulator by default | |
| 205 | * ARM64: dts: Fix the missing usb otg regulators. | |
| 206 | * arm64: dts: Fix memory region descriptions | |
| 207 | * arm64: dts: msm8916: add wcd codec support | |
| 208 | * arm64: dts: add support to analog audio playback | |
| 209 | * arm64: dts: qcom: 8x16: Add fixed rate on-board XO oscillator | |
| 210 | * arm64: dts: qcom: Add msm8916 CoreSight components | |
| 211 | * dts: qcom: Add CoreSight components for MSM8916 | |
| 212 | * arm64: dts: Fix the hypervisor and tz memory region size | |
| 213 | * arm64: dts: remove the #if 0 around bluetooth | |
| 214 | * wcn36xx: Update DT to support wcn36xx wifi driver | |
| 215 | * WIP:dts: arm64: add q6v5 pil support | |
| 216 | * arm64: dt: Add msm bus nodes | |
| 217 | * arm64: dts: usb: Add bus scaling suppport | |
| 218 | * arm64: dts: Add rpm_log support | |
| 219 | * dts: arm64: msm8916: add vidc dt nodes | |
| 220 | * dts: arm64: qcom: apq8016-sbc: enable vidc and vidc-rproc | |
| 221 | * arm64: apq8016-sbc.dtsi: Add regulators needed by adv7533 | |
| 222 | * arm64: msm8916-mdss.dtsi: Add bus scaling properties for mdp | |
| 223 | * arm64: dts: Align msm8916 cpu thermal trip point ranges | |
| 224 | * arm64: dts: qcom: apq8016-sbc: Add Volume Up key device node | |
| 225 | * arm64: dts: qcom: apq8016-sbc: Add Volume Down definitions | |
| 226 | * arm64: dts: qcom: apq8016-sbc: Limit MPP4 high state to 1.8V | |
| 227 | * arm64: dts: apq8016-sbc: add regulators support | |
| 228 | * arm64: dts: move smem node after the soc node | |
| 229 | * arm64: dts: add spmi prefix to regulators | |
| 230 | * WIP: update iommu header | |
| 231 | * soc: qcom: import socinfo.h | |
| 232 | * iommu: qcom: forward port iommu v1 | |
| 233 | * iommu: qcom: v1: rework secure part and build | |
| 234 | * iommu: qcom: v1: fix wrong sg interator | |
| 235 | * iommu: msm: Invalidate properly from iommu_unmap | |
| 236 | * arm64: provide dma cache routines with same API as 32 bit | |
| 237 | * qcom: iommu: Make use of domain_alloc and domain_free | |
| 238 | * DOWNSTREAM: drm/msm: use downstream iommu | |
| 239 | * iommu/msm: Add DT adaptation | |
| 240 | * iommu/msm: Move the contents from msm_iommu_dev.c to msm_iommu.c | |
| 241 | * iommu/msm: Add support for generic master bindings | |
| 242 | * iommu/msm: Set cacheability attributes without tex remap | |
| 243 | * temp: Add dummy msm_iommu_get_ctx and fix broken build | |
| 244 | * arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() | |
| 245 | * of: dma: Move range size workaround to of_dma_get_range() | |
| 246 | * of: dma: Make of_dma_deconfigure() public | |
| 247 | * of: dma: Split of_configure_dma() into mask and ops configuration | |
| 248 | * drivers: platform: Configure dma operations at probe time | |
| 249 | * iommu: of: Document the of_iommu_configure() function | |
| 250 | * iommu: of: Handle IOMMU lookup failure with deferred probing or error | |
| 251 | * drm/msm: temp: Add a check to be compatible against both iommuv0/v1 | |
| 252 | * iommu/msm: Fix "scheduling while atomic" bug | |
| 253 | * pci: use new of_dma_configure* apis | |
| 254 | * dt/bindings: qcom_adm: Fix channel specifiers | |
| 255 | * dmaengine: Add ADM driver | |
| 256 | * dmaengine: adm: Fix ADM hardware descriptor creation when flow control | |
| 257 | is enabled | |
| 258 | * dmaengine: adm: Use 'soft' flush when stopping DMA | |
| 259 | * dmaengine: adm: Don't reset controller during probe | |
| 260 | * dmaengine: adm: Start next DMA even if there is no ongoing transaction | |
| 261 | * ARM: cpuidle: Add cpuidle support for QCOM cpus | |
| 262 | * arm64: defconfig: qcom: Enable restart driver | |
| 263 | * arm64: introduce CPU_OF_TABLES for cpu ops selection | |
| 264 | * arm64: smp: move the pen to a header file | |
| 265 | * arm64: qcom: add cpu operations | |
| 266 | * arm64: defconfig: add qcom specifics | |
| 267 | * common: DMA-mapping: Add strongly ordered memory attribute | |
| 268 | * arm: Add option to skip buffer zeroing | |
| 269 | * arm64: Add support for DMA_ATTR_STRONGLY_ORDERED | |
| 270 | * arm64: dma-mapping: add support for IOMMU mapper | |
| 271 | * arm64: mm: Fix a bug in iommu dma-mapping | |
| 272 | * arm64: dma-mapping: fix DMA_ATTR_STRONGLY_ORDERED in __get_dma_pgprot | |
| 273 | * arm64: dma-mapping: map sg lists into the SMMU as virtually contiguous | |
| 274 | * arm64: fixup for mm renames | |
| 275 | * drm/mipi_dsi: refactor device creation | |
| 276 | * drm/mipi_dsi: check for used channels | |
| 277 | * drm/mipi_dsi: Create dummy DSI devices | |
| 278 | * drm/mipi_dsi: Get DSI host by DT device node | |
| 279 | * drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled | |
| 280 | * drm/i2c: adv7511: Initial support for adv7533 | |
| 281 | * drm/i2c: adv7511: Refactor encoder slave functions | |
| 282 | * drm/i2c: adv7511: Add drm_bridge/connector for ADV7533 | |
| 283 | * drm/i2c: adv7511: Create mipi_dsi_device for ADV7533 | |
| 284 | * drm/i2c: adv7511: setup CEC registers during power off-power-on | |
| 285 | sequence | |
| 286 | * drm/i2c: adv7511: Use internal timing generator | |
| 287 | * drm/i2c: adv7511: Change DSI lanes dynamically | |
| 288 | * drm/i2c: adv7511: Move the common data structures to header file | |
| 289 | * drm/i2c: adv7511: Add Audio support. | |
| 290 | * drm/i2c: adv7511: Enable the audio data and clock pads on adv7533 | |
| 291 | * HACK: drm/i2c: adv7511: Remove hotplug event handling | |
| 292 | * drm/i2c: adv7511: move to use reg_sequence | |
| 293 | * drm/i2c: adv7511: fixup the dapm bias level access | |
| 294 | * drm/i2c: adv7511: Init regulators | |
| 295 | * clk: qcom: gdsc: Use PM clocks to control gdsc clocks | |
| 296 | * clk: qcom: gdsc: Enable an RCG before turing on the gdsc | |
| 297 | * clk: qcom: gdsc: Manage clocks with !CONFIG_PM | |
| 298 | * clk: qcom: common: Add API to register board clocks backwards | |
| 299 | compatibly | |
| 300 | * clk: qcom: Move cxo/pxo/xo into dt files | |
| 301 | * clk: qcom: msm8916: Move xo and sleep clocks into DT | |
| 302 | * ARM: Add Krait L2 register accessor functions | |
| 303 | * clk: Avoid sending high rates to downstream clocks during set_rate | |
| 304 | * clk: mux: Split out register accessors for reuse | |
| 305 | * clk: Add safe switch hook | |
| 306 | * clk: qcom: Add support for High-Frequency PLLs (HFPLLs) | |
| 307 | * clk: qcom: Add HFPLL driver | |
| 308 | * clk: qcom: Add MSM8960/APQ8064's HFPLLs | |
| 309 | * clk: qcom: Add IPQ806X's HFPLLs | |
| 310 | * clk: qcom: Add support for Krait clocks | |
| 311 | * clk: qcom: Add KPSS ACC/GCC driver | |
| 312 | * clk: qcom: Add Krait clock controller driver | |
| 313 | * cpufreq: Add module to register cpufreq on Krait CPUs | |
| 314 | * clk: qcom: Add support for SMD-RPM Clocks | |
| 315 | * clk: qcom: Add support for RPM Clocks | |
| 316 | * clk: qcom: Add support for msm8974 RPM-SMD clocks | |
| 317 | * clk: qcom: msm8974: Remove gfx3d clock from MMCC | |
| 318 | * clk: qcom: Add support for apq8084 RPM-SMD clocks | |
| 319 | * clk: qcom: Add support for regmap mux-div clocks | |
| 320 | * clk: qcom: Add A53 clock driver | |
| 321 | * soc: qcom: Add support for SAW2 regulators | |
| 322 | * clk:gcc-msm8916: add missing mss_q6_bimc_axi clock | |
| 323 | * thermal: qcom: tsens: Add a skeletal TSENS drivers | |
| 324 | * thermal: qcom: tsens-8916: Add support for 8916 family of SoCs | |
| 325 | * thermal: qcom: tsens-8974: Add support for 8974 family of SoCs | |
| 326 | * thermal: qcom: tsens-8960: Add support for 8960 family of SoCs | |
| 327 | * amba: Defer device peripheral ID read | |
| 328 | * coresight-etm3x: Add Qualcomm PTM v1.1 peripheral ID | |
| 329 | * i2c: qup: Change qup_wait_writeready function to use for all timeouts | |
| 330 | * qup: i2c: factor out common code for reuse | |
| 331 | * i2c: qup: Add V2 tags support | |
| 332 | * i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit | |
| 333 | * i2c: qup: Add bam dma capabilities | |
| 334 | * i2c: qup: Remove verbose messages. | |
| 335 | * drm/msm/dsi: Parse lane swap information from DT | |
| 336 | * drm/msm/dsi: Add a delay when performing software reset | |
| 337 | * drm/msm/dsi: Remove incorrect warning on host attach | |
| 338 | * drm/msm/dsi: Don't call hpd helper unconditionally | |
| 339 | * HACK: drm/msm/mdp5: Make sure mdp5 clocks aren't disbaled when we need | |
| 340 | them | |
| 341 | * mdp4: Add iommu detach_dev in error path | |
| 342 | * drm/msm: remove pm_runtime_put() calls | |
| 343 | * drm/msm/dsi: Update the "vdd" voltage range | |
| 344 | * drm/msm/mdp5: Update bus scaling support | |
| 345 | * mmc: sdhci: let GPIO based card detection have higher precedence | |
| 346 | * mmc: sdhci-msm: Add SDHCI_QUIRK_NO_CARD_NO_RESET | |
| 347 | * soc: qcom: Introduce common SMEM state machine code | |
| 348 | * soc: qcom: smsm: Add driver for Qualcomm SMSM | |
| 349 | * soc: qcom: smp2p: Qualcomm Shared Memory Point to Point | |
| 350 | * soc: qcom: enable smsm/smp2p modular build | |
| 351 | * ARM: qcom: select ARM_CPU_SUSPEND for power management | |
| 352 | * soc: qcom: Introduce WCNSS_CTRL SMD client | |
| 353 | * soc: qcom: smd-rpm: Add existing platform support | |
| 354 | * ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend | |
| 355 | hook | |
| 356 | * drivers/soc/qcom/smd.c: use __ioread32_copy() instead of open-coding it | |
| 357 | * regulator: qcom-smd: Add PM8916 support | |
| 358 | * regulator: qcom-smd: Add support for PMA8084 | |
| 359 | * arm64: add qcom_defconfig | |
| 360 | * soc: qcom: smem: Add debugfs | |
| 361 | * remoteproc: core: Make the loaded resource table optional | |
| 362 | * remoteproc: qcom-pil: Implementation of Qualcomm TZ backed PIL | |
| 363 | * remoteproc: Add additional crash reasons | |
| 364 | * remoteproc: qcom-tz-pil: Add interrupts and gpio hooks | |
| 365 | * remoteproc: qcom-tz: Inform SMD about crashing remotes | |
| 366 | * remoteproc: qcom-tz: Finish shutdown on timeout | |
| 367 | * remoteproc: qcom: tz-pil: Round up max address | |
| 368 | * remoteproc: Support loading firmware from lately mounted fs (HACK) | |
| 369 | * remoteproc: qcom: q6v5 pil: Initial hack to boot mss | |
| 370 | * remoteproc: qcom-tz: Update to match smem api changes | |
| 371 | * remoteproc: qcom-tz: Update smem prototypes | |
| 372 | * remoteproc: qcom-tz: Drop smd reset stuff for now | |
| 373 | * remoteproc: qcom: Extract PAS and fix compilation for 4.1 | |
| 374 | * remoteproc: qcom_tz_pil: Fix compiler issues | |
| 375 | * remoteproc: qcom_q6v5_pil: Fix 64 bit | |
| 376 | * regulator: qcom: smd: Regulator driver for the Qualcomm RPM | |
| 377 | * gpio: qcom-smsm: Add driver for Qualcomm SMSM | |
| 378 | * gpio: smsm: Update smem prototypes | |
| 379 | * gpio: smsm: Fix compiler warnings | |
| 380 | * soc: qcom: smd: Use correct smem id | |
| 381 | * gpio: qcom-smp2p: Qualcomm Shared Memory Point to Point | |
| 382 | * dt-binding: gpio: Introduce qcom,smp2p binding documentation | |
| 383 | * gpio: qcom-smp2p: Fix compile issues | |
| 384 | * remoteproc: tz_pil: Fixes to support 8916 | |
| 385 | * HACK: soc: qcom: smd: Add debug to fix timing | |
| 386 | * regulator: smd: Add floor and corner operations | |
| 387 | * regulator: smd: Make set_{corner,floor} work with regulator struct | |
| 388 | * regulator: smd: Add correct ifdef flag for stubs | |
| 389 | * regulator: smd: remove left over debug statement | |
| 390 | * remoteproc: tz_pil: make irqs, smd edge & crash-reason optional | |
| 391 | properties | |
| 392 | * remoteproc: tz_pil: take relocation flag into account | |
| 393 | * remoteproc: tz_pil: skip waiting ready irq if it not provided | |
| 394 | * gpio:smp2p:qcom: kill set_irq_flags and use genirq | |
| 395 | * qcom-smd-rpm: Add MSM8916 support | |
| 396 | * soc: smd: Migrate the wifi driver from old smd driver to new smd | |
| 397 | driver. | |
| 398 | * soc: qcom: smd: Introduce callback setter | |
| 399 | * soc: qcom: smd: Split discovery and state change work | |
| 400 | * soc: qcom: smd: Refactor channel open and close handling | |
| 401 | * soc: qcom: smd: Support multiple channels per sdev | |
| 402 | * soc: qcom: smd: Support opening additional channels | |
| 403 | * WIP: remoteproc: q6: remove some commented out code | |
| 404 | * WIP:remoteproc:q6pil: add segment_is_loadable and | |
| 405 | segment_is_relocatable macros | |
| 406 | * WIP: remoteproc: q6: add support to memory-region | |
| 407 | * WIP: remoteproc: q6: add support to scm restart | |
| 408 | * WIP: remoteproc: HACK to get it working on DB410c | |
| 409 | * remoteproc: tz: Allow no scm clocks support | |
| 410 | * soc: qcom: Add msm_bus driver | |
| 411 | * soc: qcom: rpm_log: Add rpm log driver | |
| 412 | * soc: qcom: Stub IPCRTR client driver | |
| 413 | * Fix: Make it buildable on v4.3 | |
| 414 | * Move to new qcom_smem_get() api | |
| 415 | * PM / OPP: Support adjusting OPP voltages at runtime | |
| 416 | * OPP: Allow notifiers to call dev_pm_opp_get_{voltage, freq} RCU-free | |
| 417 | * cpufreq-dt: Handle OPP voltage adjust events | |
| 418 | * power: avs: Add support for CPR (Core Power Reduction) | |
| 419 | * power: avs: cpr: Use raw mem access for qfprom | |
| 420 | * power: avs: Register CPR with cpufreq-dt | |
| 421 | * power: avs: cpr: Fix Duplicate OPPs warning | |
| 422 | * pwer:avs: cpr: fix with new reg_sequence structures | |
| 423 | * cpufreq-dt: Add L2 frequency scaling support | |
| 424 | * firmware: qcom: scm: Add support for ARM64 SoCs | |
| 425 | * firmware: qcom: scm: Generalize shared error map | |
| 426 | * firmware: qcom: scm: Add boot APIs | |
| 427 | * firmware: qcom: scm: Peripheral Authentication Service | |
| 428 | * firmware: qcom: scm: Add 64 bit PAS APIs | |
| 429 | * firmware: qcom: scm: Fix NULL coherent device | |
| 430 | * firmware: qcom: scm: Split out 32-bit specific SCM code | |
| 431 | * firmware: qcom: scm: Support PIL SCMs | |
| 432 | * firmware: qcom: scm: Support IOMMU scm calls | |
| 433 | * firmware: qcom: scm: add video (vidc) scm calls | |
| 434 | * firmware: qcom: scm: Fixup arm64 asm | |
| 435 | * firmware: scm: add proc restart support | |
| 436 | * wcn36xx: add wcn3620 chip type definition | |
| 437 | * wcn36xx: get chip type from platform ops | |
| 438 | * wcn36xx: use 3680 dxe regs for 3620 | |
| 439 | * wcn36xx: introduce WCN36XX_HAL_AVOID_FREQ_RANGE_IND | |
| 440 | * wcn36xx: swallow two wcn3620 IND messages | |
| 441 | * wcn36xx: remove powersaving for wcn3620 | |
| 442 | * wcn36xx: handle new hal response format | |
| 443 | * wcn3620: use new response format for wcn3620 trigger_ba | |
| 444 | * wcn3620: use new response format for wcn3620 remove_bsskey | |
| 445 | * net wireless wcn36xx add wcnss platform code | |
| 446 | * net wireless wcn36xx adapt wcnss platform to select module by DT | |
| 447 | * wcn36xx: add later fw capabilities | |
| 448 | * Got workable wireless driver. | |
| 449 | * Set the dma mask for platform device which is not created from DT. | |
| 450 | * Update the initialization sequence to enable DB410c. | |
| 451 | * Migrate the wifi driver from old smd driver to new smd driver. | |
| 452 | * Bluetooth: Add HCI device identifier for Qualcomm SMD | |
| 453 | * Bluetooth: btqcomsmd: Qualcomm WCNSS HCI driver | |
| 454 | * wcn36xx: Update the smd client driver to use new smd channel | |
| 455 | * wcn36xx: eliminate the warning for unsupported SMD_EVENT | |
| 456 | * wcn36xx: avoid alloc mem with GFP_KERNEL in smd callback. | |
| 457 | * linaro: add defconfig fragment with basic linaro config | |
| 458 | * kernel: configs: move linaro distro.conf as proper %.config fragment | |
| 459 | * kernel: configs: update distro.config | |
| 460 | * kernel: configs: improve distro.config, mostly for systemd | |
| 461 | * kernel: configs: update distro config from release branch | |
| 462 | * kernel: configs: Enable input misc device drivers | |
| 463 | * media: vidc: debug: fix build warnings | |
| 464 | * media: vidc: venc/vdec: vb2 structure reorganisation | |
| 465 | * iommu: qcom: v1: move iommu-sec pgtable allocation | |
| 466 | * dts: arm: apq8064: add support to q6 pil via pil-tz | |
| 467 | * arm: dts: apq8064: add support to smd apr_audio svc channel | |
| 468 | * dts: arm: add support to digital audio via dsp | |
| 469 | * arm: dts: qcom: apq8064: Add RPMCC DT node | |
| 470 | * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators | |
| 471 | * ARM: dts: ERAGON: fix uart pinctrl | |
| 472 | * dts: qcom: Add CoreSight components for APQ8064 | |
| 473 | * arm: dts: apq8064: fix clock names according to new rpmcc | |
| 474 | * usb: phy: msm: fix error handling in probe. | |
| 475 | * usb: phy: msm: HACK: Make Vddc configuration optional | |
| 476 | * usb: phy: msm: Disable driver runtime PM | |
| 477 | * usb: phy: msm: Ensure that workers are initialized before use | |
| 478 | * usb: chipidea: msm: Use posted data writes on AHB | |
| 479 | * usb: host: ehci-msm: Use posted data writes on AHB | |
| 480 | * drivers: usb: Add bus scaling suppport | |
| 481 | * ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders | |
| 482 | * ALSA: pcm: add IEC958 channel status helper for hw_params | |
| 483 | * sound: codec: Add support to msm8x16_wcd codec. | |
| 484 | * sound: qcom: add dsp support to apq8064 | |
| 485 | * WIP: drm: msm: add proper hdmi codec driver. | |
| 486 | * ASoC: qcom: use correct device pointer in dma allocation | |
| 487 | * arm: dts: remove duplicate entires | |
| 488 | * cpufreq-dt: Add missing rcu_read_lock() for find_device_opp() | |
| 489 | * multi_v7_defconfig: add msm iommu kconfig | |
| 490 | * kernel: add DRM_LOAD_EDID_FIRMWARE in distro.config | |
| 491 | * kernel: configs: add I2C_CHARDEV in distro.config | |
| 492 | * kernel: configs: add CONFIG_INPUT_JOYDEV in distro.config | |
| 493 | * fixup! ARM: qcom_defconfig: Add QCOM specific drivers | |
| 494 | * wcn36xx: handle rx skb allocation failure to avoid system crash | |
| 495 | * wcn36xx: split DMA mask register writing. | |
| 496 | * wcn36xx: Clean up wcn36xx_smd_send_beacon | |
| 497 | * wcn36xx: Pad TIM PVM if needed | |
| 498 | * wcn36xx: Add helper macros to cast vif to private vif and vice versa | |
| 499 | * wcn36xx: Use consistent name for private vif | |
| 500 | * wcn36xx: Use define for invalid index and fix typo | |
| 501 | * wcn36xx: Fetch private sta data from sta entry instead of from vif | |
| 502 | * wcn36xx: Add helper macros to cast sta to priv | |
| 503 | * wcn36xx: Remove sta pointer in private vif struct | |
| 504 | * wcn36xx: Parse trigger_ba response properly | |
| 505 | * wcn36xx: Copy all members in config_sta v1 conversion | |
| 506 | * wcn36xx: Use allocated self sta index instead of hard coded | |
| 507 | * wcn36xx: Clear encrypt_type when deleting bss key | |
| 508 | * wcn36xx: Track association state | |
| 509 | * wcn36xx: Implement multicast filtering | |
| 510 | * wcn36xx: don't pad beacons for mesh | |
| 511 | * wcn36xx: Use correct command struct for EXIT_BMPS_REQ | |
| 512 | * wcn36xx: Disable power save for now | |
| 513 | * wcn36xx: remove references to IFF_PROMISC | |
| 11dd2ff3 PP |
514 | |
| 515 | -- Paolo Pisati <paolo.pisati@canonical.com> Thu, 04 Feb 2016 16:20:26 +0100 | |
| 516 | ||
| 3c0b18f1 PP |
517 | linux-snapdragon (4.2.0-2012.12) xenial; urgency=low |
| 518 | ||
| 519 | [ Tim Gardner ] | |
| 520 | ||
| 521 | * [Config] renamed to snapdragon | |
| 522 | * Rebased on Ubuntu-4.2.0-25.30 | |
| 523 | ||
| 524 | -- Tim Gardner <tim.gardner@canonical.com> Tue, 26 Jan 2016 15:04:16 -0700 | |
| 525 | ||
| 526 | linux-snapdragon (4.2.0-2011.11) xenial; urgency=low | |
| 527 | ||
| 528 | [ Upstream Kernel Changes ] | |
| 529 | ||
| 530 | * arm64: errata: Add -mpc-relative-literal-loads to erratum #843419 build | |
| 531 | flags | |
| 532 | - LP: #1533009 | |
| 533 | ||
| 534 | -- Paolo Pisati <paolo.pisati@canonical.com> Mon, 25 Jan 2016 11:51:37 +0100 | |
| 535 | ||
| 536 | linux-snapdragon (4.2.0-2010.10) xenial; urgency=low | |
| 537 | ||
| 538 | [ Paolo Pisati ] | |
| 539 | ||
| 540 | * [Config] DEBUG_MEMORY_INIT=y | |
| 541 | * [Config] DEBUG_MUTEXES=y && DEBUG_SPINLOCK=y | |
| 542 | ||
| 543 | -- Paolo Pisati <paolo.pisati@canonical.com> Thu, 21 Jan 2016 09:30:55 +0100 | |
| 544 | ||
| 545 | linux-dragon410c (4.2.0-2009.9) xenial; urgency=low | |
| 546 | ||
| 547 | [ Paolo Pisati ] | |
| 548 | ||
| 549 | * [Config] USB_HSIC_USB3503=y | |
| 550 | * [Config] USB_MSM_OTG=y | |
| 551 | * [Config] USB_GADGET=y | |
| 552 | * [Config] USB_CHIPIDEA=y | |
| 553 | ||
| 554 | -- Paolo Pisati <paolo.pisati@canonical.com> Tue, 19 Jan 2016 11:39:28 +0100 | |
| 555 | ||
| 556 | linux-dragon410c (4.2.0-2008.8) xenial; urgency=low | |
| 557 | ||
| 558 | [ Paolo Pisati ] | |
| 559 | ||
| 560 | * rebased on Ubuntu-4.2.0-24.29 | |
| 561 | * update Linaro BSP qcomlt-4.2 @ f1bd413 | |
| 562 | * [Config] disable QCOM_[CPUFREQ|CPUIDLE], use the DT generic | |
| 563 | * [Config] BUS_TOPOLOGY_ADHOC=y | |
| 564 | * [Config] disable MMC_CLKGATE | |
| 565 | * [Config] MSM_BUS_SCALING=y | |
| 566 | * [Config] disable NO_HZ | |
| 567 | * [Config] disable PM_DEVFREQ | |
| 568 | * [Config] disable PM_WAKELOCKS | |
| 569 | * [Config] USB_OHCI_HCD_PLATFORM=y | |
| 570 | * [Config] disable USB_UHCI_HCD | |
| 571 | * [Config] disable USB_XHCI_HCD | |
| 572 | ||
| 573 | -- Paolo Pisati <paolo.pisati@canonical.com> Mon, 18 Jan 2016 11:43:16 +0100 | |
| 574 | ||
| 575 | linux-dragon410c (4.2.0-2007.7) xenial; urgency=low | |
| 576 | ||
| 577 | [ Paolo Pisati ] | |
| 578 | ||
| 579 | * [Config] disable all arm64 SOCs but QCOM | |
| 580 | * [Config] REGULATOR_FAN53555=y | |
| 581 | * [Config] MMC_CLKGATE=y | |
| 582 | * [Config] USB_EHCI_HCD_PLATFORM=y && USB_EHCI_MSM=y | |
| 583 | * [Config] annotations: enable EHCI platform on arm64 | |
| 584 | * [Config] DMA_CMA=y | |
| 585 | * [Config] I2C_QUP=y | |
| 586 | * [Config] HW_RANDOM_MSM=y && HW_RANDOM_TPM=y | |
| 587 | * [Config] INPUT_PM8941_PWRKEY=y | |
| 588 | * [Config] LEDS_GPIO=y && LEDS_TRIGGER*=y | |
| 589 | * [Config] AUTOFS4_FS=y | |
| 590 | * [Config] SPMI=y, REGULATOR_QCOM_SPMI=y, PINCTRL_QCOM_SPMI_PMIC | |
| 591 | * [Config] MMC_QCOM_DML=y | |
| 592 | * [Config] MSM_RPMCC_8064=y | |
| 593 | * [Config] QCOM_QFPROM=y && QCOM_TSENS=y | |
| 594 | ||
| 595 | -- Paolo Pisati <paolo.pisati@canonical.com> Wed, 13 Jan 2016 21:56:58 +0100 | |
| 596 | ||
| 597 | linux-dragon410c (4.2.0-2006.6) xenial; urgency=low | |
| 598 | ||
| 599 | [ Paolo Pisati ] | |
| 600 | ||
| 601 | * [Config] NLS_ISO8859_1=y | |
| 602 | ||
| 603 | -- Paolo Pisati <paolo.pisati@canonical.com> Mon, 04 Jan 2016 15:51:22 +0100 | |
| 604 | ||
| 605 | linux-dragon410c (4.2.0-2005.5) xenial; urgency=low | |
| 606 | ||
| 607 | [ Paolo Pisati ] | |
| 608 | ||
| 609 | * Revert "[Config] FTBFS: disable ARM64_CRYPTO" | |
| 610 | * [Config] REGULATOR_FIXED_VOLTAGE=y | |
| 611 | * [Config] QCOM_A53=y | |
| 612 | * [Config] MFD_QCOM_RPM=y | |
| 613 | * [Config] MMC_SDHCI=y && MMC_SDHCI_MSM=y | |
| 614 | * [Config] PINCTRL_MSM8916=y | |
| 615 | * [Config] QCOM_BAM_DMA && QCOM_GSBI=y | |
| 616 | * [Config] REGULATOR_QCOM_RPM=y | |
| 617 | * [Config] MMC_BLOCK_MINORS=32 | |
| 618 | * [Config] CRYPTO_DRBG=y | |
| 619 | ||
| 620 | -- Paolo Pisati <paolo.pisati@canonical.com> Mon, 04 Jan 2016 11:11:59 +0100 | |
| 621 | ||
| 622 | linux-dragon410c (4.2.0-2004.4) xenial; urgency=low | |
| 623 | ||
| 624 | [ Paolo Pisati ] | |
| 625 | ||
| 626 | * [Config] FTBFS: disable ARM64_CRYPTO | |
| 627 | ||
| 628 | -- Paolo Pisati <paolo.pisati@canonical.com> Wed, 09 Dec 2015 14:12:54 +0100 | |
| 629 | ||
| 630 | linux-dragon410c (4.2.0-2003.3) xenial; urgency=low | |
| 631 | ||
| 632 | [ Paolo Pisati ] | |
| 633 | ||
| 634 | * [Config] COMMON_CLK_QCOM=y && HWSPINLOCK_QCOM=y | |
| 635 | * [Config] QCOM_SMD=y (fix FTBFS SERIAL_MSM_SMD) | |
| 636 | * [Config] MFD_QCOM_SMD_RPM=y && REGULATOR_QCOM_SMD_RPM=y | |
| 637 | * [Config] VIDEO_V4L2=y | |
| 638 | * [Config] MSM_VIDC_V4L2=y | |
| 639 | * [Config] QCOM_Q6V5_PIL=y && QCOM_TZ_PIL=y | |
| 640 | * [Config] DRM_MSM=y && DRM_I2C_ADV7511=y | |
| 641 | * [Config] SND_SOC_QCOM=y | |
| 642 | * [Config] MSM_GCC_8916=y | |
| 643 | * [Config] DRM_PANEL_SIMPLE=y | |
| 644 | ||
| 645 | -- Paolo Pisati <paolo.pisati@canonical.com> Wed, 09 Dec 2015 11:33:29 +0100 | |
| 646 | ||
| 647 | linux-dragon410c (4.2.0-2002.2) xenial; urgency=low | |
| 648 | ||
| 649 | [ Paolo Pisati ] | |
| 650 | ||
| 651 | * [Config] snappy config fragments: generic, systemd, lxc, security and | |
| 652 | snappy | |
| 653 | * [Config] snappy/security: CC_STACKPROTECTOR_REGULAR=y | |
| 654 | * [Config] snappy/snappy: RFKILL_REGULATOR depends on REGULATOR=y | |
| 655 | * [Config] snappy/generic: CRASH_DUMP=y | |
| 656 | * [Config] snappy/generic: NVRAM=m | |
| 657 | * [Config] snappy/generic: INPUT_UINPUT=y | |
| 658 | * [Config] snappy/generic: SYSVIPC=y && SYSVIPC_SYSCTL=y | |
| 659 | * [Config] snappy/generic: LOCALVERSION= to avoid packaging failure | |
| 660 | * [Config] updateconfigs | |
| 661 | ||
| 662 | [ Upstream Kernel Changes ] | |
| 663 | ||
| 664 | * media: vidc: fix compile error | |
| 665 | ||
| 666 | -- Paolo Pisati <paolo.pisati@canonical.com> Fri, 04 Dec 2015 15:24:16 +0100 | |
| 667 | ||
| 668 | linux-dragon410c (4.2.0-2001.1) xenial; urgency=low | |
| 669 | ||
| 670 | [ Paolo Pisati ] | |
| 671 | ||
| 672 | * import http://git.linaro.org/landing-teams/working/qualcomm/kernel.git @ | |
| 673 | ubuntu-qcom-dragonboard410c-15.09 | |
| 674 | * rebased on Ubuntu-4.2.0-19.23 | |
| 675 | ||
| 676 | -- Paolo Pisati <paolo.pisati@canonical.com> Thu, 03 Dec 2015 17:18:07 +0200 |