UBUNTU: [Config] FTBFS: disable DRM_PANEL_SIMPLE

[mirror_ubuntu-artful-kernel.git] / debian.snapdragon / changelog

linux-snapdragon (4.4.0-1001.1) xenial; urgency=low

  [ Paolo Pisati ]

  * Imported http://git.linaro.org/landing-teams/working/qualcomm/kernel.git - qcomlt-4.4 @ 17a6dbb
  * Rebased on Ubuntu-4.4.0-2.16

  [ Upstream Kernel Changes ]

  * mmc: mmci: Support any block sizes for ux500v2 and qcom variant
  * hid: add support for Lilliput touchscreen
  * ARM: qcom_defconfig: Add QCOM specific drivers
  * arm:multi_v7_defconfig: Add QCOM specific Kconfigs
  * WIP:pwrseq: Convert in to proper platform device
  * iommu:msm: fix compilation error.
  * Input: pm8941: Add RESIN_N input handling
  * media: v4l2-controls: add h264 5.2 level and constrained high profile
  * media: vidc: Qualcomm video encoder/decoder driver
  * PCI: designware: add memory barrier after enabling region
  * DT: PCI: qcom: Document PCIe devicetree bindings
  * PCI: qcom: Add Qualcomm PCIe controller driver
  * drm/edid: Add support to get edid early
  * drm/edid: export edid_vendor()
  * drm/panel: simple-panel: Add panel picker support.
  * drm/msm: mdp4 lvds: continue if the panel is not connected
  * drm/msm: mdp4 lvds: Check the panel node in detect_panel()
  * devicetree: Add hardware rng entry to qcom-apq8064.dtsi
  * ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
  * ARM: dts: qcom: apq8064: Declare all pm8921 regulators
  * ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
  * arm: dts: qcom: Add generic PMIC gpio/MPP compat strings
  * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
  * ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6
  * ARM: dts: apq8064: add pcie devicetree node
  * ARM: dts: ifc6410: enable pcie dt node for this board
  * ARM: dts: apq8064: Add MDP support
  * ARM: dts: ifc6410: enable MDP support
  * ARM: dts: qs600: enable MDP support
  * ARM: dts: ifc6410: add inforce LVDS panel support
  * ARM: dts: APQ8064: Add iommu
  * ARM: dts: apq8064: add pci support in CM QS600
  * ARM: dts: qcom: Add necessary DT data for Krait cpufreq
  * ARM: qcom: add description of KPSS WDT for APQ8064
  * ARM: dts: apq8064: Assign a power supply to each CPU
  * ARM: dts: apq8064: Add OPP data for frequencies above 1ghz
  * ARM: dts: apq8064: Add thermal cooling maps
  * ARM: dts: apq8064: Add voltage ranges of the SAW2 regulators
  * ARM: dts: apq8064: Add reference to the L2 clock
  * ARM: dts: apq8064: Add a DT node for the L2 data
  * ARM: dts: apq8064: Add ADM configuration node
  * arm: dts: Added eInfochips ERAGON600 board support
  * ARM: dts: ifc6410: HACK add bt reset gpios to pwrseq
  * ARM: dts: apq8064: Increase critical temperature to 110C
  * arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
  * arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations
  * arm64: dts: qcom: 8x16: UART1 and UART2 use DMA for RX and TX
  * arm64: dts: qcom: Make msm8916-mtp compatible string compliant
  * arm64: dts: qcom: Alias pm8916 on msm8916 devices
  * arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators
  * arm64: dts: fix the i2c aliasing to match to schematics.
  * arm64: dts: set the default i2c pin drive strength to 16mA
  * arm64: dts: qcom: Add MSM8916 SMEM nodes
  * arm64: dts: qcom: Add RPM/SMD support on MSM8916
  * arm64: dts: Add PM8916 support on MSM8916
  * arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons
  * arm64: dts: qcom: Add pm8994 gpios and MPPs
  * arm64: dts: apq8016-sbc: enable UART0 on LS connector
  * arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
  * devicetree: bindings: Document qcom,msm-id and qcom,board-id
  * arm64: dts: Add Qualcomm MSM8916 & MTP8916 ids
  * DT: arm64: msm8916-mtp: enable spi3
  * arm64: dts: qcom: Add APQ8016 SBC support
  * arm64: dts: qcom: Add USB related device nodes on APQ8016 SBC board
  * arm64: dts: qcom: Add sdhci support for APQ8016 SBC board
  * arm64: dts: Add nodes we need for SMP boot
  * ARM: dts: Enable SD card (disable vmcc)
  * arm64: msm8916 dtsi: Add mdss support
  * arm64: sb8016: Add ADV7533 bridge in sbc8016 dtsi
  * arm64: dts: Add apq8016-sbc hdmi audio support
  * arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins
  * arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions
  * arm64: dts: qcom: apq8016-sbc: add D+/D- route switch GPIO
  * arm64: dts: qcom: apq8016-sbc: Fix sdhci pinctrl default state name
  * arm64: dts: qcom: apq8016-sbc: Enable SD card slot
  * arm64: dts: qcom: Fix MPP's function used for LED control
  * arm64: dts: qcom: Enable USB manual pullup on msm8916
  * arm64: dts: qcom: msm8916: Add RPMCC DT node
  * arm64: dts: qcom: msm8916: Add A53 DT node
  * arm64: dts: Add cpufreq-dt support for msm8916
  * arm64: dts: Add clock-latency for msm8916
  * arm64: dts: Add CPR DT node for msm8916
  * arm64: dts: Add cpu-supply properties for cpufreq
  * arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes
  * arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes
  * arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes
  * arm64: dts: Add spmi-regulator nodes for pm8916
  * arm64: dts: msm8916: Add cpu cooling maps
  * WIP: dt: add support for gpu on msm8916/apq8016
  * DT: arm64: add iommu dtsi files
  * arm64: dt: Add WCNSS related nodes
  * dts: arm64: apq8016-sbc: enable LS 1.8v regulator by default
  * ARM64: dts: Fix the missing usb otg regulators.
  * arm64: dts: Fix memory region descriptions
  * arm64: dts: msm8916: add wcd codec support
  * arm64: dts: add support to analog audio playback
  * arm64: dts: qcom: 8x16: Add fixed rate on-board XO oscillator
  * arm64: dts: qcom: Add msm8916 CoreSight components
  * dts: qcom: Add CoreSight components for MSM8916
  * arm64: dts: Fix the hypervisor and tz memory region size
  * arm64: dts: remove the #if 0 around bluetooth
  * wcn36xx: Update DT to support wcn36xx wifi driver
  * WIP:dts: arm64: add q6v5 pil support
  * arm64: dt: Add msm bus nodes
  * arm64: dts: usb: Add bus scaling suppport
  * arm64: dts: Add rpm_log support
  * dts: arm64: msm8916: add vidc dt nodes
  * dts: arm64: qcom: apq8016-sbc: enable vidc and vidc-rproc
  * arm64: apq8016-sbc.dtsi: Add regulators needed by adv7533
  * arm64: msm8916-mdss.dtsi: Add bus scaling properties for mdp
  * arm64: dts: Align msm8916 cpu thermal trip point ranges
  * arm64: dts: qcom: apq8016-sbc: Add Volume Up key device node
  * arm64: dts: qcom: apq8016-sbc: Add Volume Down definitions
  * arm64: dts: qcom: apq8016-sbc: Limit MPP4 high state to 1.8V
  * arm64: dts: apq8016-sbc: add regulators support
  * arm64: dts: move smem node after the soc node
  * arm64: dts: add spmi prefix to regulators
  * WIP: update iommu header
  * soc: qcom: import socinfo.h
  * iommu: qcom: forward port iommu v1
  * iommu: qcom: v1: rework secure part and build
  * iommu: qcom: v1: fix wrong sg interator
  * iommu: msm: Invalidate properly from iommu_unmap
  * arm64: provide dma cache routines with same API as 32 bit
  * qcom: iommu: Make use of domain_alloc and domain_free
  * DOWNSTREAM: drm/msm: use downstream iommu
  * iommu/msm: Add DT adaptation
  * iommu/msm: Move the contents from msm_iommu_dev.c to msm_iommu.c
  * iommu/msm: Add support for generic master bindings
  * iommu/msm: Set cacheability attributes without tex remap
  * temp: Add dummy msm_iommu_get_ctx and fix broken build
  * arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
  * of: dma: Move range size workaround to of_dma_get_range()
  * of: dma: Make of_dma_deconfigure() public
  * of: dma: Split of_configure_dma() into mask and ops configuration
  * drivers: platform: Configure dma operations at probe time
  * iommu: of: Document the of_iommu_configure() function
  * iommu: of: Handle IOMMU lookup failure with deferred probing or error
  * drm/msm: temp: Add a check to be compatible against both iommuv0/v1
  * iommu/msm: Fix "scheduling while atomic" bug
  * pci: use new of_dma_configure* apis
  * dt/bindings: qcom_adm: Fix channel specifiers
  * dmaengine: Add ADM driver
  * dmaengine: adm: Fix ADM hardware descriptor creation when flow control
    is enabled
  * dmaengine: adm: Use 'soft' flush when stopping DMA
  * dmaengine: adm: Don't reset controller during probe
  * dmaengine: adm: Start next DMA even if there is no ongoing transaction
  * ARM: cpuidle: Add cpuidle support for QCOM cpus
  * arm64: defconfig: qcom: Enable restart driver
  * arm64: introduce CPU_OF_TABLES for cpu ops selection
  * arm64: smp: move the pen to a header file
  * arm64: qcom: add cpu operations
  * arm64: defconfig: add qcom specifics
  * common: DMA-mapping: Add strongly ordered memory attribute
  * arm: Add option to skip buffer zeroing
  * arm64: Add support for DMA_ATTR_STRONGLY_ORDERED
  * arm64: dma-mapping: add support for IOMMU mapper
  * arm64: mm: Fix a bug in iommu dma-mapping
  * arm64: dma-mapping: fix DMA_ATTR_STRONGLY_ORDERED in __get_dma_pgprot
  * arm64: dma-mapping: map sg lists into the SMMU as virtually contiguous
  * arm64: fixup for mm renames
  * drm/mipi_dsi: refactor device creation
  * drm/mipi_dsi: check for used channels
  * drm/mipi_dsi: Create dummy DSI devices
  * drm/mipi_dsi: Get DSI host by DT device node
  * drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled
  * drm/i2c: adv7511: Initial support for adv7533
  * drm/i2c: adv7511: Refactor encoder slave functions
  * drm/i2c: adv7511: Add drm_bridge/connector for ADV7533
  * drm/i2c: adv7511: Create mipi_dsi_device for ADV7533
  * drm/i2c: adv7511: setup CEC registers during power off-power-on
    sequence
  * drm/i2c: adv7511: Use internal timing generator
  * drm/i2c: adv7511: Change DSI lanes dynamically
  * drm/i2c: adv7511: Move the common data structures to header file
  * drm/i2c: adv7511: Add Audio support.
  * drm/i2c: adv7511: Enable the audio data and clock pads on adv7533
  * HACK: drm/i2c: adv7511: Remove hotplug event handling
  * drm/i2c: adv7511: move to use reg_sequence
  * drm/i2c: adv7511: fixup the dapm bias level access
  * drm/i2c: adv7511: Init regulators
  * clk: qcom: gdsc: Use PM clocks to control gdsc clocks
  * clk: qcom: gdsc: Enable an RCG before turing on the gdsc
  * clk: qcom: gdsc: Manage clocks with !CONFIG_PM
  * clk: qcom: common: Add API to register board clocks backwards
    compatibly
  * clk: qcom: Move cxo/pxo/xo into dt files
  * clk: qcom: msm8916: Move xo and sleep clocks into DT
  * ARM: Add Krait L2 register accessor functions
  * clk: Avoid sending high rates to downstream clocks during set_rate
  * clk: mux: Split out register accessors for reuse
  * clk: Add safe switch hook
  * clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  * clk: qcom: Add HFPLL driver
  * clk: qcom: Add MSM8960/APQ8064's HFPLLs
  * clk: qcom: Add IPQ806X's HFPLLs
  * clk: qcom: Add support for Krait clocks
  * clk: qcom: Add KPSS ACC/GCC driver
  * clk: qcom: Add Krait clock controller driver
  * cpufreq: Add module to register cpufreq on Krait CPUs
  * clk: qcom: Add support for SMD-RPM Clocks
  * clk: qcom: Add support for RPM Clocks
  * clk: qcom: Add support for msm8974 RPM-SMD clocks
  * clk: qcom: msm8974: Remove gfx3d clock from MMCC
  * clk: qcom: Add support for apq8084 RPM-SMD clocks
  * clk: qcom: Add support for regmap mux-div clocks
  * clk: qcom: Add A53 clock driver
  * soc: qcom: Add support for SAW2 regulators
  * clk:gcc-msm8916: add missing mss_q6_bimc_axi clock
  * thermal: qcom: tsens: Add a skeletal TSENS drivers
  * thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
  * thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
  * thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
  * amba: Defer device peripheral ID read
  * coresight-etm3x: Add Qualcomm PTM v1.1 peripheral ID
  * i2c: qup: Change qup_wait_writeready function to use for all timeouts
  * qup: i2c: factor out common code for reuse
  * i2c: qup: Add V2 tags support
  * i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  * i2c: qup: Add bam dma capabilities
  * i2c: qup: Remove verbose messages.
  * drm/msm/dsi: Parse lane swap information from DT
  * drm/msm/dsi: Add a delay when performing software reset
  * drm/msm/dsi: Remove incorrect warning on host attach
  * drm/msm/dsi: Don't call hpd helper unconditionally
  * HACK: drm/msm/mdp5: Make sure mdp5 clocks aren't disbaled when we need
    them
  * mdp4: Add iommu detach_dev in error path
  * drm/msm: remove pm_runtime_put() calls
  * drm/msm/dsi: Update the "vdd" voltage range
  * drm/msm/mdp5: Update bus scaling support
  * mmc: sdhci: let GPIO based card detection have higher precedence
  * mmc: sdhci-msm: Add SDHCI_QUIRK_NO_CARD_NO_RESET
  * soc: qcom: Introduce common SMEM state machine code
  * soc: qcom: smsm: Add driver for Qualcomm SMSM
  * soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  * soc: qcom: enable smsm/smp2p modular build
  * ARM: qcom: select ARM_CPU_SUSPEND for power management
  * soc: qcom: Introduce WCNSS_CTRL SMD client
  * soc: qcom: smd-rpm: Add existing platform support
  * ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend
    hook
  * drivers/soc/qcom/smd.c: use __ioread32_copy() instead of open-coding it
  * regulator: qcom-smd: Add PM8916 support
  * regulator: qcom-smd: Add support for PMA8084
  * arm64: add qcom_defconfig
  * soc: qcom: smem: Add debugfs
  * remoteproc: core: Make the loaded resource table optional
  * remoteproc: qcom-pil: Implementation of Qualcomm TZ backed PIL
  * remoteproc: Add additional crash reasons
  * remoteproc: qcom-tz-pil: Add interrupts and gpio hooks
  * remoteproc: qcom-tz: Inform SMD about crashing remotes
  * remoteproc: qcom-tz: Finish shutdown on timeout
  * remoteproc: qcom: tz-pil: Round up max address
  * remoteproc: Support loading firmware from lately mounted fs (HACK)
  * remoteproc: qcom: q6v5 pil: Initial hack to boot mss
  * remoteproc: qcom-tz: Update to match smem api changes
  * remoteproc: qcom-tz: Update smem prototypes
  * remoteproc: qcom-tz: Drop smd reset stuff for now
  * remoteproc: qcom: Extract PAS and fix compilation for 4.1
  * remoteproc: qcom_tz_pil: Fix compiler issues
  * remoteproc: qcom_q6v5_pil: Fix 64 bit
  * regulator: qcom: smd: Regulator driver for the Qualcomm RPM
  * gpio: qcom-smsm: Add driver for Qualcomm SMSM
  * gpio: smsm: Update smem prototypes
  * gpio: smsm: Fix compiler warnings
  * soc: qcom: smd: Use correct smem id
  * gpio: qcom-smp2p: Qualcomm Shared Memory Point to Point
  * dt-binding: gpio: Introduce qcom,smp2p binding documentation
  * gpio: qcom-smp2p: Fix compile issues
  * remoteproc: tz_pil: Fixes to support 8916
  * HACK: soc: qcom: smd: Add debug to fix timing
  * regulator: smd: Add floor and corner operations
  * regulator: smd: Make set_{corner,floor} work with regulator struct
  * regulator: smd: Add correct ifdef flag for stubs
  * regulator: smd: remove left over debug statement
  * remoteproc: tz_pil: make irqs, smd edge & crash-reason optional
    properties
  * remoteproc: tz_pil: take relocation flag into account
  * remoteproc: tz_pil: skip waiting ready irq if it not provided
  * gpio:smp2p:qcom: kill set_irq_flags and use genirq
  * qcom-smd-rpm: Add MSM8916 support
  * soc: smd: Migrate the wifi driver from old smd driver to new smd
    driver.
  * soc: qcom: smd: Introduce callback setter
  * soc: qcom: smd: Split discovery and state change work
  * soc: qcom: smd: Refactor channel open and close handling
  * soc: qcom: smd: Support multiple channels per sdev
  * soc: qcom: smd: Support opening additional channels
  * WIP: remoteproc: q6: remove some commented out code
  * WIP:remoteproc:q6pil: add segment_is_loadable and
    segment_is_relocatable macros
  * WIP: remoteproc: q6: add support to memory-region
  * WIP: remoteproc: q6: add support to scm restart
  * WIP: remoteproc: HACK to get it working on	DB410c
  * remoteproc: tz: Allow no scm clocks support
  * soc: qcom: Add msm_bus driver
  * soc: qcom: rpm_log: Add rpm log driver
  * soc: qcom: Stub IPCRTR client driver
  * Fix: Make it buildable on v4.3
  * Move to new qcom_smem_get() api
  * PM / OPP: Support adjusting OPP voltages at runtime
  * OPP: Allow notifiers to call dev_pm_opp_get_{voltage, freq} RCU-free
  * cpufreq-dt: Handle OPP voltage adjust events
  * power: avs: Add support for CPR (Core Power Reduction)
  * power: avs: cpr: Use raw mem access for qfprom
  * power: avs: Register CPR with cpufreq-dt
  * power: avs: cpr: Fix Duplicate OPPs warning
  * pwer:avs: cpr: fix with new reg_sequence structures
  * cpufreq-dt: Add L2 frequency scaling support
  * firmware: qcom: scm: Add support for ARM64 SoCs
  * firmware: qcom: scm: Generalize shared error map
  * firmware: qcom: scm: Add boot APIs
  * firmware: qcom: scm: Peripheral Authentication Service
  * firmware: qcom: scm: Add 64 bit PAS APIs
  * firmware: qcom: scm: Fix NULL coherent device
  * firmware: qcom: scm: Split out 32-bit specific SCM code
  * firmware: qcom: scm: Support PIL SCMs
  * firmware: qcom: scm: Support IOMMU scm calls
  * firmware: qcom: scm: add video (vidc) scm calls
  * firmware: qcom: scm: Fixup arm64 asm
  * firmware: scm: add proc restart support
  * wcn36xx: add wcn3620 chip type definition
  * wcn36xx: get chip type from platform ops
  * wcn36xx: use 3680 dxe regs for 3620
  * wcn36xx: introduce WCN36XX_HAL_AVOID_FREQ_RANGE_IND
  * wcn36xx: swallow two wcn3620 IND messages
  * wcn36xx: remove powersaving for wcn3620
  * wcn36xx: handle new hal response format
  * wcn3620: use new response format for wcn3620 trigger_ba
  * wcn3620: use new response format for wcn3620 remove_bsskey
  * net wireless wcn36xx add wcnss platform code
  * net wireless wcn36xx adapt wcnss platform to select module by DT
  * wcn36xx: add later fw capabilities
  * Got workable wireless driver.
  * Set the dma mask for platform device which is not created from DT.
  * Update the initialization sequence to enable DB410c.
  * Migrate the wifi driver from old smd driver to new smd driver.
  * Bluetooth: Add HCI device identifier for Qualcomm SMD
  * Bluetooth: btqcomsmd: Qualcomm WCNSS HCI driver
  * wcn36xx: Update the smd client driver to use new smd channel
  * wcn36xx: eliminate the warning for unsupported SMD_EVENT
  * wcn36xx: avoid alloc mem with GFP_KERNEL in smd callback.
  * linaro: add defconfig fragment with basic linaro config
  * kernel: configs: move linaro distro.conf as proper %.config fragment
  * kernel: configs: update distro.config
  * kernel: configs: improve distro.config, mostly for systemd
  * kernel: configs: update distro config from release branch
  * kernel: configs: Enable input misc device drivers
  * media: vidc: debug: fix build warnings
  * media: vidc: venc/vdec: vb2 structure reorganisation
  * iommu: qcom: v1: move iommu-sec pgtable allocation
  * dts: arm: apq8064: add support to q6 pil via pil-tz
  * arm: dts: apq8064: add support to smd apr_audio svc channel
  * dts: arm: add support to digital audio via dsp
  * arm: dts: qcom: apq8064: Add RPMCC DT node
  * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
  * ARM: dts: ERAGON: fix uart pinctrl
  * dts: qcom: Add CoreSight components for APQ8064
  * arm: dts: apq8064: fix clock names according to new rpmcc
  * usb: phy: msm: fix error handling in probe.
  * usb: phy: msm: HACK: Make Vddc configuration optional
  * usb: phy: msm: Disable driver runtime PM
  * usb: phy: msm: Ensure that workers are initialized before use
  * usb: chipidea: msm: Use posted data writes on AHB
  * usb: host: ehci-msm: Use posted data writes on AHB
  * drivers: usb: Add bus scaling suppport
  * ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
  * ALSA: pcm: add IEC958 channel status helper for hw_params
  * sound: codec: Add support to msm8x16_wcd codec.
  * sound: qcom: add dsp support to apq8064
  * WIP: drm: msm: add proper hdmi codec driver.
  * ASoC: qcom: use correct device pointer in dma allocation
  * arm: dts: remove duplicate entires
  * cpufreq-dt: Add missing rcu_read_lock() for find_device_opp()
  * multi_v7_defconfig: add msm iommu kconfig
  * kernel: add DRM_LOAD_EDID_FIRMWARE in distro.config
  * kernel: configs: add I2C_CHARDEV in distro.config
  * kernel: configs: add CONFIG_INPUT_JOYDEV in distro.config
  * fixup! ARM: qcom_defconfig: Add QCOM specific drivers
  * wcn36xx: handle rx skb allocation failure to avoid system crash
  * wcn36xx: split DMA mask register writing.
  * wcn36xx: Clean up wcn36xx_smd_send_beacon
  * wcn36xx: Pad TIM PVM if needed
  * wcn36xx: Add helper macros to cast vif to private vif and vice versa
  * wcn36xx: Use consistent name for private vif
  * wcn36xx: Use define for invalid index and fix typo
  * wcn36xx: Fetch private sta data from sta entry instead of from vif
  * wcn36xx: Add helper macros to cast sta to priv
  * wcn36xx: Remove sta pointer in private vif struct
  * wcn36xx: Parse trigger_ba response properly
  * wcn36xx: Copy all members in config_sta v1 conversion
  * wcn36xx: Use allocated self sta index instead of hard coded
  * wcn36xx: Clear encrypt_type when deleting bss key
  * wcn36xx: Track association state
  * wcn36xx: Implement multicast filtering
  * wcn36xx: don't pad beacons for mesh
  * wcn36xx: Use correct command struct for EXIT_BMPS_REQ
  * wcn36xx: Disable power save for now
  * wcn36xx: remove references to IFF_PROMISC

 -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 04 Feb 2016 16:20:26 +0100

linux-snapdragon (4.2.0-2012.12) xenial; urgency=low

  [ Tim Gardner ]

  * [Config] renamed to snapdragon
  * Rebased on Ubuntu-4.2.0-25.30

 -- Tim Gardner <tim.gardner@canonical.com>  Tue, 26 Jan 2016 15:04:16 -0700

linux-snapdragon (4.2.0-2011.11) xenial; urgency=low

  [ Upstream Kernel Changes ]

  * arm64: errata: Add -mpc-relative-literal-loads to erratum #843419 build
    flags
    - LP: #1533009

 -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 25 Jan 2016 11:51:37 +0100

linux-snapdragon (4.2.0-2010.10) xenial; urgency=low

  [ Paolo Pisati ]

  * [Config] DEBUG_MEMORY_INIT=y
  * [Config] DEBUG_MUTEXES=y && DEBUG_SPINLOCK=y

 -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 21 Jan 2016 09:30:55 +0100

linux-dragon410c (4.2.0-2009.9) xenial; urgency=low

  [ Paolo Pisati ]

  * [Config] USB_HSIC_USB3503=y
  * [Config] USB_MSM_OTG=y
  * [Config] USB_GADGET=y
  * [Config] USB_CHIPIDEA=y

 -- Paolo Pisati <paolo.pisati@canonical.com>  Tue, 19 Jan 2016 11:39:28 +0100

linux-dragon410c (4.2.0-2008.8) xenial; urgency=low

  [ Paolo Pisati ]

  * rebased on Ubuntu-4.2.0-24.29
  * update Linaro BSP qcomlt-4.2 @ f1bd413
  * [Config] disable QCOM_[CPUFREQ|CPUIDLE], use the DT generic
  * [Config] BUS_TOPOLOGY_ADHOC=y
  * [Config] disable MMC_CLKGATE
  * [Config] MSM_BUS_SCALING=y
  * [Config] disable NO_HZ
  * [Config] disable PM_DEVFREQ
  * [Config] disable PM_WAKELOCKS
  * [Config] USB_OHCI_HCD_PLATFORM=y
  * [Config] disable USB_UHCI_HCD
  * [Config] disable USB_XHCI_HCD

 -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 18 Jan 2016 11:43:16 +0100

linux-dragon410c (4.2.0-2007.7) xenial; urgency=low

  [ Paolo Pisati ]

  * [Config] disable all arm64 SOCs but QCOM
  * [Config] REGULATOR_FAN53555=y
  * [Config] MMC_CLKGATE=y
  * [Config] USB_EHCI_HCD_PLATFORM=y && USB_EHCI_MSM=y
  * [Config] annotations: enable EHCI platform on arm64
  * [Config] DMA_CMA=y
  * [Config] I2C_QUP=y
  * [Config] HW_RANDOM_MSM=y && HW_RANDOM_TPM=y
  * [Config] INPUT_PM8941_PWRKEY=y
  * [Config] LEDS_GPIO=y && LEDS_TRIGGER*=y
  * [Config] AUTOFS4_FS=y
  * [Config] SPMI=y, REGULATOR_QCOM_SPMI=y, PINCTRL_QCOM_SPMI_PMIC
  * [Config] MMC_QCOM_DML=y
  * [Config] MSM_RPMCC_8064=y
  * [Config] QCOM_QFPROM=y && QCOM_TSENS=y

 -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 13 Jan 2016 21:56:58 +0100

linux-dragon410c (4.2.0-2006.6) xenial; urgency=low

  [ Paolo Pisati ]

  * [Config] NLS_ISO8859_1=y

 -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 04 Jan 2016 15:51:22 +0100

linux-dragon410c (4.2.0-2005.5) xenial; urgency=low

  [ Paolo Pisati ]

  * Revert "[Config] FTBFS: disable ARM64_CRYPTO"
  * [Config] REGULATOR_FIXED_VOLTAGE=y
  * [Config] QCOM_A53=y
  * [Config] MFD_QCOM_RPM=y
  * [Config] MMC_SDHCI=y && MMC_SDHCI_MSM=y
  * [Config] PINCTRL_MSM8916=y
  * [Config] QCOM_BAM_DMA && QCOM_GSBI=y
  * [Config] REGULATOR_QCOM_RPM=y
  * [Config] MMC_BLOCK_MINORS=32
  * [Config] CRYPTO_DRBG=y

 -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 04 Jan 2016 11:11:59 +0100

linux-dragon410c (4.2.0-2004.4) xenial; urgency=low

  [ Paolo Pisati ]

  * [Config] FTBFS: disable ARM64_CRYPTO

 -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 09 Dec 2015 14:12:54 +0100

linux-dragon410c (4.2.0-2003.3) xenial; urgency=low

  [ Paolo Pisati ]

  * [Config] COMMON_CLK_QCOM=y && HWSPINLOCK_QCOM=y
  * [Config] QCOM_SMD=y (fix FTBFS SERIAL_MSM_SMD)
  * [Config] MFD_QCOM_SMD_RPM=y && REGULATOR_QCOM_SMD_RPM=y
  * [Config] VIDEO_V4L2=y
  * [Config] MSM_VIDC_V4L2=y
  * [Config] QCOM_Q6V5_PIL=y && QCOM_TZ_PIL=y
  * [Config] DRM_MSM=y && DRM_I2C_ADV7511=y
  * [Config] SND_SOC_QCOM=y
  * [Config] MSM_GCC_8916=y
  * [Config] DRM_PANEL_SIMPLE=y

 -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 09 Dec 2015 11:33:29 +0100

linux-dragon410c (4.2.0-2002.2) xenial; urgency=low

  [ Paolo Pisati ]

  * [Config] snappy config fragments: generic, systemd, lxc, security and
    snappy
  * [Config] snappy/security: CC_STACKPROTECTOR_REGULAR=y
  * [Config] snappy/snappy: RFKILL_REGULATOR depends on REGULATOR=y
  * [Config] snappy/generic: CRASH_DUMP=y
  * [Config] snappy/generic: NVRAM=m
  * [Config] snappy/generic: INPUT_UINPUT=y
  * [Config] snappy/generic: SYSVIPC=y && SYSVIPC_SYSCTL=y
  * [Config] snappy/generic: LOCALVERSION= to avoid packaging failure
  * [Config] updateconfigs

  [ Upstream Kernel Changes ]

  * media: vidc: fix compile error

 -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 04 Dec 2015 15:24:16 +0100

linux-dragon410c (4.2.0-2001.1) xenial; urgency=low

  [ Paolo Pisati ]

  * import http://git.linaro.org/landing-teams/working/qualcomm/kernel.git @
    ubuntu-qcom-dragonboard410c-15.09
  * rebased on Ubuntu-4.2.0-19.23

 --  Paolo Pisati <paolo.pisati@canonical.com>  Thu, 03 Dec 2015 17:18:07 +0200