[mirror_qemu.git] / docs / pcie.txt

PCI EXPRESS GUIDELINES
======================

1. Introduction
================
The doc proposes best practices on how to use PCI Express/PCI device
in PCI Express based machines and explains the reasoning behind them.

The following presentations accompany this document:
 (1) Q35 overview.
     https://wiki.qemu.org/images/4/4e/Q35.pdf
 (2) A comparison between PCI and PCI Express technologies.
     https://wiki.qemu.org/images/f/f6/PCIvsPCIe.pdf

Note: The usage examples are not intended to replace the full
documentation, please use QEMU help to retrieve all options.

2. Device placement strategy
============================
QEMU does not have a clear socket-device matching mechanism
and allows any PCI/PCI Express device to be plugged into any
PCI/PCI Express slot.
Plugging a PCI device into a PCI Express slot might not always work and
is weird anyway since it cannot be done for "bare metal".
Plugging a PCI Express device into a PCI slot will hide the Extended
Configuration Space thus is also not recommended.

The recommendation is to separate the PCI Express and PCI hierarchies.
PCI Express devices should be plugged only into PCI Express Root Ports and
PCI Express Downstream ports.

2.1 Root Bus (pcie.0)
=====================
Place only the following kinds of devices directly on the Root Complex:
    (1) PCI Devices (e.g. network card, graphics card, IDE controller),
        not controllers. Place only legacy PCI devices on
        the Root Complex. These will be considered Integrated Endpoints.
        Note: Integrated Endpoints are not hot-pluggable.

        Although the PCI Express spec does not forbid PCI Express devices as
        Integrated Endpoints, existing hardware mostly integrates legacy PCI
        devices with the Root Complex. Guest OSes are suspected to behave
        strangely when PCI Express devices are integrated
        with the Root Complex.

    (2) PCI Express Root Ports (ioh3420), for starting exclusively PCI Express
        hierarchies.

    (3) PCI Express to PCI Bridge (pcie-pci-bridge), for starting legacy PCI
        hierarchies.

    (4) Extra Root Complexes (pxb-pcie), if multiple PCI Express Root Buses
        are needed.

   pcie.0 bus
   ----------------------------------------------------------------------------
        |                |                    |                  |
   -----------   ------------------   -------------------   --------------
   | PCI Dev |   | PCIe Root Port |   | PCIe-PCI Bridge |   |  pxb-pcie  |
   -----------   ------------------   -------------------   --------------

2.1.1 To plug a device into pcie.0 as a Root Complex Integrated Endpoint use:
          -device <dev>[,bus=pcie.0]
2.1.2 To expose a new PCI Express Root Bus use:
          -device pxb-pcie,id=pcie.1,bus_nr=x[,numa_node=y][,addr=z]
      PCI Express Root Ports and PCI Express to PCI bridges can be
      connected to the pcie.1 bus:
          -device ioh3420,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z]                                     \
          -device pcie-pci-bridge,id=pcie_pci_bridge1,bus=pcie.1


2.2 PCI Express only hierarchy
==============================
Always use PCI Express Root Ports to start PCI Express hierarchies.

A PCI Express Root bus supports up to 32 devices. Since each
PCI Express Root Port is a function and a multi-function
device may support up to 8 functions, the maximum possible
number of PCI Express Root Ports per PCI Express Root Bus is 256.

Prefer grouping PCI Express Root Ports into multi-function devices
to keep a simple flat hierarchy that is enough for most scenarios.
Only use PCI Express Switches (x3130-upstream, xio3130-downstream)
if there is no more room for PCI Express Root Ports.
Please see section 4. for further justifications.

Plug only PCI Express devices into PCI Express Ports.


   pcie.0 bus
   ----------------------------------------------------------------------------------
        |                 |                                    |
   -------------    -------------                        -------------
   | Root Port |    | Root Port |                        | Root Port |
   ------------     -------------                        -------------
         |                            -------------------------|------------------------
    ------------                      |                 -----------------              |
    | PCIe Dev |                      |    PCI Express  | Upstream Port |              |
    ------------                      |      Switch     -----------------              |
                                      |                  |            |                |
                                      |    -------------------    -------------------  |
                                      |    | Downstream Port |    | Downstream Port |  |
                                      |    -------------------    -------------------  |
                                      -------------|-----------------------|------------
                                             ------------
                                             | PCIe Dev |
                                             ------------

2.2.1 Plugging a PCI Express device into a PCI Express Root Port:
          -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z]  \
          -device <dev>,bus=root_port1
2.2.2 Using multi-function PCI Express Root Ports:
      -device ioh3420,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0] \
      -device ioh3420,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \
      -device ioh3420,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \
2.2.3 Plugging a PCI Express device into a Switch:
      -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z]  \
      -device x3130-upstream,id=upstream_port1,bus=root_port1[,addr=x]          \
      -device xio3130-downstream,id=downstream_port1,bus=upstream_port1,chassis=x1,slot=y1[,addr=z1]] \
      -device <dev>,bus=downstream_port1

Notes:
  - (slot, chassis) pair is mandatory and must be unique for each
    PCI Express Root Port. slot defaults to 0 when not specified.
  - 'addr' parameter can be 0 for all the examples above.


2.3 PCI only hierarchy
======================
Legacy PCI devices can be plugged into pcie.0 as Integrated Endpoints,
but, as mentioned in section 5, doing so means the legacy PCI
device in question will be incapable of hot-unplugging.
Besides that use PCI Express to PCI Bridges (pcie-pci-bridge) in
combination with PCI-PCI Bridges (pci-bridge) to start PCI hierarchies.

Prefer flat hierarchies. For most scenarios a single PCI Express to PCI Bridge
(having 32 slots) and several PCI-PCI Bridges attached to it
(each supporting also 32 slots) will support hundreds of legacy devices.
The recommendation is to populate one PCI-PCI Bridge under the
PCI Express to PCI Bridge until is full and then plug a new PCI-PCI Bridge...

   pcie.0 bus
   ----------------------------------------------
        |                            |
   -----------               -------------------
   | PCI Dev |               | PCIe-PCI Bridge |
   -----------               -------------------
                               |            |
                  ------------------    ------------------
                  | PCI-PCI Bridge |    | PCI-PCI Bridge |
                  ------------------    ------------------
                                         |           |
                                  -----------     -----------
                                  | PCI Dev |     | PCI Dev |
                                  -----------     -----------

2.3.1 To plug a PCI device into pcie.0 as an Integrated Endpoint use:
      -device <dev>[,bus=pcie.0]
2.3.2 Plugging a PCI device into a PCI-PCI Bridge:
      -device pcie-pci-bridge,id=pcie_pci_bridge1[,bus=pcie.0] \
      -device pci-bridge,id=pci_bridge1,bus=pcie_pci_bridge1[,chassis_nr=x][,addr=y] \
      -device <dev>,bus=pci_bridge1[,addr=x]
      Note that 'addr' cannot be 0 unless shpc=off parameter is passed to
      the PCI Bridge/PCI Express to PCI Bridge.

3. IO space issues
===================
The PCI Express Root Ports and PCI Express Downstream ports are seen by
Firmware/Guest OS as PCI-PCI Bridges. As required by the PCI spec, each
such Port should be reserved a 4K IO range for, even though only one
(multifunction) device can be plugged into each Port. This results in
poor IO space utilization.

The firmware used by QEMU (SeaBIOS/OVMF) may try further optimizations
by not allocating IO space for each PCI Express Root / PCI Express
Downstream port if:
    (1) the port is empty, or
    (2) the device behind the port has no IO BARs.

The IO space is very limited, to 65536 byte-wide IO ports, and may even be
fragmented by fixed IO ports owned by platform devices resulting in at most
10 PCI Express Root Ports or PCI Express Downstream Ports per system
if devices with IO BARs are used in the PCI Express hierarchy. Using the
proposed device placing strategy solves this issue by using only
PCI Express devices within PCI Express hierarchy.

The PCI Express spec requires that PCI Express devices work properly
without using IO ports. The PCI hierarchy has no such limitations.


4. Bus numbers issues
======================
Each PCI domain can have up to only 256 buses and the QEMU PCI Express
machines do not support multiple PCI domains even if extra Root
Complexes (pxb-pcie) are used.

Each element of the PCI Express hierarchy (Root Complexes,
PCI Express Root Ports, PCI Express Downstream/Upstream ports)
uses one bus number. Since only one (multifunction) device
can be attached to a PCI Express Root Port or PCI Express Downstream
Port it is advised to plan in advance for the expected number of
devices to prevent bus number starvation.

Avoiding PCI Express Switches (and thereby striving for a 'flatter' PCI
Express hierarchy) enables the hierarchy to not spend bus numbers on
Upstream Ports.

The bus_nr properties of the pxb-pcie devices partition the 0..255 bus
number space. All bus numbers assigned to the buses recursively behind a
given pxb-pcie device's root bus must fit between the bus_nr property of
that pxb-pcie device, and the lowest of the higher bus_nr properties
that the command line sets for other pxb-pcie devices.


5. Hot-plug
============
The PCI Express root buses (pcie.0 and the buses exposed by pxb-pcie devices)
do not support hot-plug, so any devices plugged into Root Complexes
cannot be hot-plugged/hot-unplugged:
    (1) PCI Express Integrated Endpoints
    (2) PCI Express Root Ports
    (3) PCI Express to PCI Bridges
    (4) pxb-pcie

Be aware that PCI Express Downstream Ports can't be hot-plugged into
an existing PCI Express Upstream Port.

PCI devices can be hot-plugged into PCI Express to PCI and PCI-PCI Bridges.
The PCI hot-plug into PCI-PCI bridge is ACPI based, whereas hot-plug into
PCI Express to PCI bridges is SHPC-based. They both can work side by side with
the PCI Express native hot-plug.

PCI Express devices can be natively hot-plugged/hot-unplugged into/from
PCI Express Root Ports (and PCI Express Downstream Ports).

5.1 Planning for hot-plug:
    (1) PCI hierarchy
        Leave enough PCI-PCI Bridge slots empty or add one
        or more empty PCI-PCI Bridges to the PCI Express to PCI Bridge.

        For each such PCI-PCI Bridge the Guest Firmware is expected to reserve
        4K IO space and 2M MMIO range to be used for all devices behind it.
        Appropriate PCI capability is designed, see pcie_pci_bridge.txt.

        Because of the hard IO limit of around 10 PCI Bridges (~ 40K space)
        per system don't use more than 9 PCI-PCI Bridges, leaving 4K for the
        Integrated Endpoints. (The PCI Express Hierarchy needs no IO space).

    (2) PCI Express hierarchy:
        Leave enough PCI Express Root Ports empty. Use multifunction
        PCI Express Root Ports (up to 8 ports per pcie.0 slot)
        on the Root Complex(es), for keeping the
        hierarchy as flat as possible, thereby saving PCI bus numbers.
        Don't use PCI Express Switches if you don't have
        to, each one of those uses an extra PCI bus (for its Upstream Port)
        that could be put to better use with another Root Port or Downstream
        Port, which may come handy for hot-plugging another device.


5.3 Hot-plug example:
Using HMP: (add -monitor stdio to QEMU command line)
  device_add <dev>,id=<id>,bus=<PCI Express Root Port Id/PCI Express Downstream Port Id/PCI-PCI Bridge Id/>


6. Device assignment
====================
Host devices are mostly PCI Express and should be plugged only into
PCI Express Root Ports or PCI Express Downstream Ports.
PCI-PCI Bridge slots can be used for legacy PCI host devices.

6.1 How to detect if a device is PCI Express:
  > lspci -s 03:00.0 -v (as root)

    03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)
    Subsystem: Intel Corporation Dual Band Wireless-AC 7260
    Flags: bus master, fast devsel, latency 0, IRQ 50
    Memory at f0400000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: [c8] Power Management version 3
    Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [40] Express Endpoint, MSI 00
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Device Serial Number 7c-7a-91-ff-ff-90-db-20
    Capabilities: [14c] Latency Tolerance Reporting
    Capabilities: [154] Vendor Specific Information: ID=cafe Rev=1 Len=014 

If you can see the "Express Endpoint" capability in the
output, then the device is indeed PCI Express.


7. Virtio devices
=================
Virtio devices plugged into the PCI hierarchy or as Integrated Endpoints
will remain PCI and have transitional behaviour as default.
Transitional virtio devices work in both IO and MMIO modes depending on
the guest support. The Guest firmware will assign both IO and MMIO resources
to transitional virtio devices.

Virtio devices plugged into PCI Express ports are PCI Express devices and
have "1.0" behavior by default without IO support.
In both cases disable-legacy and disable-modern properties can be used
to override the behaviour.

Note that setting disable-legacy=off will enable legacy mode (enabling
legacy behavior) for PCI Express virtio devices causing them to
require IO space, which, given the limited available IO space, may quickly
lead to resource exhaustion, and is therefore strongly discouraged.


8. Conclusion
==============
The proposal offers a usage model that is easy to understand and follow
and at the same time overcomes the PCI Express architecture limitations.
Commit	Line	Data
453ac883 MA	1	PCI EXPRESS GUIDELINES
	2	======================
	3
	4	1. Introduction
	5	================
	6	The doc proposes best practices on how to use PCI Express/PCI device
	7	in PCI Express based machines and explains the reasoning behind them.
	8
	9	The following presentations accompany this document:
	10	(1) Q35 overview.
70b7fba9	11	https://wiki.qemu.org/images/4/4e/Q35.pdf
453ac883	12	(2) A comparison between PCI and PCI Express technologies.
70b7fba9	13	https://wiki.qemu.org/images/f/f6/PCIvsPCIe.pdf
453ac883 MA	14
	15	Note: The usage examples are not intended to replace the full
	16	documentation, please use QEMU help to retrieve all options.
	17
	18	2. Device placement strategy
	19	============================
	20	QEMU does not have a clear socket-device matching mechanism
	21	and allows any PCI/PCI Express device to be plugged into any
	22	PCI/PCI Express slot.
	23	Plugging a PCI device into a PCI Express slot might not always work and
	24	is weird anyway since it cannot be done for "bare metal".
	25	Plugging a PCI Express device into a PCI slot will hide the Extended
	26	Configuration Space thus is also not recommended.
	27
	28	The recommendation is to separate the PCI Express and PCI hierarchies.
	29	PCI Express devices should be plugged only into PCI Express Root Ports and
	30	PCI Express Downstream ports.
	31
	32	2.1 Root Bus (pcie.0)
	33	=====================
	34	Place only the following kinds of devices directly on the Root Complex:
	35	(1) PCI Devices (e.g. network card, graphics card, IDE controller),
	36	not controllers. Place only legacy PCI devices on
	37	the Root Complex. These will be considered Integrated Endpoints.
	38	Note: Integrated Endpoints are not hot-pluggable.
	39
	40	Although the PCI Express spec does not forbid PCI Express devices as
	41	Integrated Endpoints, existing hardware mostly integrates legacy PCI
	42	devices with the Root Complex. Guest OSes are suspected to behave
	43	strangely when PCI Express devices are integrated
	44	with the Root Complex.
	45
	46	(2) PCI Express Root Ports (ioh3420), for starting exclusively PCI Express
	47	hierarchies.
	48
c1800a16	49	(3) PCI Express to PCI Bridge (pcie-pci-bridge), for starting legacy PCI
453ac883 MA	50	hierarchies.
	51
	52	(4) Extra Root Complexes (pxb-pcie), if multiple PCI Express Root Buses
	53	are needed.
	54
	55	pcie.0 bus
	56	----------------------------------------------------------------------------
	57	\| \| \| \|
c1800a16 AB	58	----------- ------------------ ------------------- --------------
	59	\| PCI Dev \| \| PCIe Root Port \| \| PCIe-PCI Bridge \| \| pxb-pcie \|
	60	----------- ------------------ ------------------- --------------
453ac883 MA	61
	62	2.1.1 To plug a device into pcie.0 as a Root Complex Integrated Endpoint use:
	63	-device <dev>[,bus=pcie.0]
	64	2.1.2 To expose a new PCI Express Root Bus use:
	65	-device pxb-pcie,id=pcie.1,bus_nr=x[,numa_node=y][,addr=z]
c1800a16 AB	66	PCI Express Root Ports and PCI Express to PCI bridges can be
c1800a16 AB	67	connected to the pcie.1 bus:
453ac883	68	-device ioh3420,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z] \
c1800a16	69	-device pcie-pci-bridge,id=pcie_pci_bridge1,bus=pcie.1
453ac883 MA	70
	71
	72	2.2 PCI Express only hierarchy
	73	==============================
	74	Always use PCI Express Root Ports to start PCI Express hierarchies.
	75
	76	A PCI Express Root bus supports up to 32 devices. Since each
	77	PCI Express Root Port is a function and a multi-function
	78	device may support up to 8 functions, the maximum possible
	79	number of PCI Express Root Ports per PCI Express Root Bus is 256.
	80
	81	Prefer grouping PCI Express Root Ports into multi-function devices
	82	to keep a simple flat hierarchy that is enough for most scenarios.
	83	Only use PCI Express Switches (x3130-upstream, xio3130-downstream)
	84	if there is no more room for PCI Express Root Ports.
	85	Please see section 4. for further justifications.
	86
	87	Plug only PCI Express devices into PCI Express Ports.
	88
	89
	90	pcie.0 bus
	91	----------------------------------------------------------------------------------
	92	\| \| \|
	93	------------- ------------- -------------
	94	\| Root Port \| \| Root Port \| \| Root Port \|
	95	------------ ------------- -------------
	96	\| -------------------------\|------------------------
	97	------------ \| ----------------- \|
	98	\| PCIe Dev \| \| PCI Express \| Upstream Port \| \|
	99	------------ \| Switch ----------------- \|
	100	\| \| \| \|
	101	\| ------------------- ------------------- \|
	102	\| \| Downstream Port \| \| Downstream Port \| \|
	103	\| ------------------- ------------------- \|
	104	-------------\|-----------------------\|------------
	105	------------
	106	\| PCIe Dev \|
	107	------------
	108
	109	2.2.1 Plugging a PCI Express device into a PCI Express Root Port:
	110	-device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \
	111	-device <dev>,bus=root_port1
	112	2.2.2 Using multi-function PCI Express Root Ports:
2e41dfe1 C	113	-device ioh3420,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0] \
	114	-device ioh3420,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \
	115	-device ioh3420,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \
	116	2.2.3 Plugging a PCI Express device into a Switch:
453ac883 MA	117	-device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \
	118	-device x3130-upstream,id=upstream_port1,bus=root_port1[,addr=x] \
	119	-device xio3130-downstream,id=downstream_port1,bus=upstream_port1,chassis=x1,slot=y1[,addr=z1]] \
	120	-device <dev>,bus=downstream_port1
	121
	122	Notes:
2e41dfe1 C	123	- (slot, chassis) pair is mandatory and must be unique for each
2e41dfe1 C	124	PCI Express Root Port. slot defaults to 0 when not specified.
453ac883 MA	125	- 'addr' parameter can be 0 for all the examples above.
	126
	127
	128	2.3 PCI only hierarchy
	129	======================
	130	Legacy PCI devices can be plugged into pcie.0 as Integrated Endpoints,
	131	but, as mentioned in section 5, doing so means the legacy PCI
	132	device in question will be incapable of hot-unplugging.
c1800a16 AB	133	Besides that use PCI Express to PCI Bridges (pcie-pci-bridge) in
c1800a16 AB	134	combination with PCI-PCI Bridges (pci-bridge) to start PCI hierarchies.
453ac883	135
c1800a16	136	Prefer flat hierarchies. For most scenarios a single PCI Express to PCI Bridge
453ac883 MA	137	(having 32 slots) and several PCI-PCI Bridges attached to it
453ac883 MA	138	(each supporting also 32 slots) will support hundreds of legacy devices.
c1800a16 AB	139	The recommendation is to populate one PCI-PCI Bridge under the
c1800a16 AB	140	PCI Express to PCI Bridge until is full and then plug a new PCI-PCI Bridge...
453ac883 MA	141
	142	pcie.0 bus
	143	----------------------------------------------
	144	\| \|
c1800a16 AB	145	----------- -------------------
	146	\| PCI Dev \| \| PCIe-PCI Bridge \|
	147	----------- -------------------
453ac883 MA	148	\| \|
453ac883 MA	149	------------------ ------------------
c1800a16	150	\| PCI-PCI Bridge \| \| PCI-PCI Bridge \|
453ac883 MA	151	------------------ ------------------
	152	\| \|
	153	----------- -----------
	154	\| PCI Dev \| \| PCI Dev \|
	155	----------- -----------
	156
	157	2.3.1 To plug a PCI device into pcie.0 as an Integrated Endpoint use:
	158	-device <dev>[,bus=pcie.0]
	159	2.3.2 Plugging a PCI device into a PCI-PCI Bridge:
c1800a16 AB	160	-device pcie-pci-bridge,id=pcie_pci_bridge1[,bus=pcie.0] \
c1800a16 AB	161	-device pci-bridge,id=pci_bridge1,bus=pcie_pci_bridge1[,chassis_nr=x][,addr=y] \
453ac883 MA	162	-device <dev>,bus=pci_bridge1[,addr=x]
453ac883 MA	163	Note that 'addr' cannot be 0 unless shpc=off parameter is passed to
c1800a16	164	the PCI Bridge/PCI Express to PCI Bridge.
453ac883 MA	165
	166	3. IO space issues
	167	===================
	168	The PCI Express Root Ports and PCI Express Downstream ports are seen by
	169	Firmware/Guest OS as PCI-PCI Bridges. As required by the PCI spec, each
	170	such Port should be reserved a 4K IO range for, even though only one
	171	(multifunction) device can be plugged into each Port. This results in
	172	poor IO space utilization.
	173
	174	The firmware used by QEMU (SeaBIOS/OVMF) may try further optimizations
	175	by not allocating IO space for each PCI Express Root / PCI Express
	176	Downstream port if:
	177	(1) the port is empty, or
	178	(2) the device behind the port has no IO BARs.
	179
	180	The IO space is very limited, to 65536 byte-wide IO ports, and may even be
	181	fragmented by fixed IO ports owned by platform devices resulting in at most
	182	10 PCI Express Root Ports or PCI Express Downstream Ports per system
	183	if devices with IO BARs are used in the PCI Express hierarchy. Using the
	184	proposed device placing strategy solves this issue by using only
	185	PCI Express devices within PCI Express hierarchy.
	186
	187	The PCI Express spec requires that PCI Express devices work properly
	188	without using IO ports. The PCI hierarchy has no such limitations.
	189
	190
	191	4. Bus numbers issues
	192	======================
	193	Each PCI domain can have up to only 256 buses and the QEMU PCI Express
	194	machines do not support multiple PCI domains even if extra Root
	195	Complexes (pxb-pcie) are used.
	196
	197	Each element of the PCI Express hierarchy (Root Complexes,
	198	PCI Express Root Ports, PCI Express Downstream/Upstream ports)
	199	uses one bus number. Since only one (multifunction) device
	200	can be attached to a PCI Express Root Port or PCI Express Downstream
	201	Port it is advised to plan in advance for the expected number of
	202	devices to prevent bus number starvation.
	203
	204	Avoiding PCI Express Switches (and thereby striving for a 'flatter' PCI
	205	Express hierarchy) enables the hierarchy to not spend bus numbers on
	206	Upstream Ports.
	207
	208	The bus_nr properties of the pxb-pcie devices partition the 0..255 bus
	209	number space. All bus numbers assigned to the buses recursively behind a
	210	given pxb-pcie device's root bus must fit between the bus_nr property of
	211	that pxb-pcie device, and the lowest of the higher bus_nr properties
	212	that the command line sets for other pxb-pcie devices.
	213
	214
	215	5. Hot-plug
	216	============
	217	The PCI Express root buses (pcie.0 and the buses exposed by pxb-pcie devices)
	218	do not support hot-plug, so any devices plugged into Root Complexes
	219	cannot be hot-plugged/hot-unplugged:
	220	(1) PCI Express Integrated Endpoints
	221	(2) PCI Express Root Ports
c1800a16	222	(3) PCI Express to PCI Bridges
453ac883 MA	223	(4) pxb-pcie
	224
	225	Be aware that PCI Express Downstream Ports can't be hot-plugged into
	226	an existing PCI Express Upstream Port.
	227
c1800a16 AB	228	PCI devices can be hot-plugged into PCI Express to PCI and PCI-PCI Bridges.
	229	The PCI hot-plug into PCI-PCI bridge is ACPI based, whereas hot-plug into
	230	PCI Express to PCI bridges is SHPC-based. They both can work side by side with
	231	the PCI Express native hot-plug.
453ac883 MA	232
	233	PCI Express devices can be natively hot-plugged/hot-unplugged into/from
	234	PCI Express Root Ports (and PCI Express Downstream Ports).
	235
	236	5.1 Planning for hot-plug:
	237	(1) PCI hierarchy
	238	Leave enough PCI-PCI Bridge slots empty or add one
c1800a16	239	or more empty PCI-PCI Bridges to the PCI Express to PCI Bridge.
453ac883 MA	240
	241	For each such PCI-PCI Bridge the Guest Firmware is expected to reserve
	242	4K IO space and 2M MMIO range to be used for all devices behind it.
c1800a16	243	Appropriate PCI capability is designed, see pcie_pci_bridge.txt.
453ac883 MA	244
	245	Because of the hard IO limit of around 10 PCI Bridges (~ 40K space)
	246	per system don't use more than 9 PCI-PCI Bridges, leaving 4K for the
	247	Integrated Endpoints. (The PCI Express Hierarchy needs no IO space).
	248
	249	(2) PCI Express hierarchy:
	250	Leave enough PCI Express Root Ports empty. Use multifunction
	251	PCI Express Root Ports (up to 8 ports per pcie.0 slot)
	252	on the Root Complex(es), for keeping the
	253	hierarchy as flat as possible, thereby saving PCI bus numbers.
	254	Don't use PCI Express Switches if you don't have
	255	to, each one of those uses an extra PCI bus (for its Upstream Port)
	256	that could be put to better use with another Root Port or Downstream
	257	Port, which may come handy for hot-plugging another device.
	258
	259
	260	5.3 Hot-plug example:
	261	Using HMP: (add -monitor stdio to QEMU command line)
	262	device_add <dev>,id=<id>,bus=<PCI Express Root Port Id/PCI Express Downstream Port Id/PCI-PCI Bridge Id/>
	263
	264
	265	6. Device assignment
	266	====================
	267	Host devices are mostly PCI Express and should be plugged only into
	268	PCI Express Root Ports or PCI Express Downstream Ports.
	269	PCI-PCI Bridge slots can be used for legacy PCI host devices.
	270
	271	6.1 How to detect if a device is PCI Express:
	272	> lspci -s 03:00.0 -v (as root)
	273
	274	03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)
	275	Subsystem: Intel Corporation Dual Band Wireless-AC 7260
	276	Flags: bus master, fast devsel, latency 0, IRQ 50
	277	Memory at f0400000 (64-bit, non-prefetchable) [size=8K]
	278	Capabilities: [c8] Power Management version 3
	279	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	280	Capabilities: [40] Express Endpoint, MSI 00
	281	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
	282	Capabilities: [100] Advanced Error Reporting
	283	Capabilities: [140] Device Serial Number 7c-7a-91-ff-ff-90-db-20
	284	Capabilities: [14c] Latency Tolerance Reporting
	285	Capabilities: [154] Vendor Specific Information: ID=cafe Rev=1 Len=014
	286
	287	If you can see the "Express Endpoint" capability in the
	288	output, then the device is indeed PCI Express.
	289
	290
	291	7. Virtio devices
	292	=================
	293	Virtio devices plugged into the PCI hierarchy or as Integrated Endpoints
	294	will remain PCI and have transitional behaviour as default.
	295	Transitional virtio devices work in both IO and MMIO modes depending on
	296	the guest support. The Guest firmware will assign both IO and MMIO resources
	297	to transitional virtio devices.
	298
	299	Virtio devices plugged into PCI Express ports are PCI Express devices and
	300	have "1.0" behavior by default without IO support.
	301	In both cases disable-legacy and disable-modern properties can be used
	302	to override the behaviour.
	303
	304	Note that setting disable-legacy=off will enable legacy mode (enabling
	305	legacy behavior) for PCI Express virtio devices causing them to
	306	require IO space, which, given the limited available IO space, may quickly
	307	lead to resource exhaustion, and is therefore strongly discouraged.
308
309
310	8. Conclusion
311	==============
312	The proposal offers a usage model that is easy to understand and follow
313	and at the same time overcomes the PCI Express architecture limitations.