[mirror_ubuntu-artful-kernel.git] / drivers / acpi / acpica / evhandler.c

/******************************************************************************
 *
 * Module Name: evhandler - Support for Address Space handlers
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2013, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#include "acinterp.h"

#define _COMPONENT          ACPI_EVENTS
ACPI_MODULE_NAME("evhandler")

/* Local prototypes */
static acpi_status
acpi_ev_install_handler(acpi_handle obj_handle,
			u32 level, void *context, void **return_value);

/* These are the address spaces that will get default handlers */

u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
	ACPI_ADR_SPACE_SYSTEM_MEMORY,
	ACPI_ADR_SPACE_SYSTEM_IO,
	ACPI_ADR_SPACE_PCI_CONFIG,
	ACPI_ADR_SPACE_DATA_TABLE
};

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_install_region_handlers
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Installs the core subsystem default address space handlers.
 *
 ******************************************************************************/

acpi_status acpi_ev_install_region_handlers(void)
{
	acpi_status status;
	u32 i;

	ACPI_FUNCTION_TRACE(ev_install_region_handlers);

	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/*
	 * All address spaces (PCI Config, EC, SMBus) are scope dependent and
	 * registration must occur for a specific device.
	 *
	 * In the case of the system memory and IO address spaces there is
	 * currently no device associated with the address space. For these we
	 * use the root.
	 *
	 * We install the default PCI config space handler at the root so that
	 * this space is immediately available even though the we have not
	 * enumerated all the PCI Root Buses yet. This is to conform to the ACPI
	 * specification which states that the PCI config space must be always
	 * available -- even though we are nowhere near ready to find the PCI root
	 * buses at this point.
	 *
	 * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
	 * has already been installed (via acpi_install_address_space_handler).
	 * Similar for AE_SAME_HANDLER.
	 */
	for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
		status = acpi_ev_install_space_handler(acpi_gbl_root_node,
						       acpi_gbl_default_address_spaces
						       [i],
						       ACPI_DEFAULT_HANDLER,
						       NULL, NULL);
		switch (status) {
		case AE_OK:
		case AE_SAME_HANDLER:
		case AE_ALREADY_EXISTS:

			/* These exceptions are all OK */

			status = AE_OK;
			break;

		default:

			goto unlock_and_exit;
		}
	}

      unlock_and_exit:
	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
	return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_has_default_handler
 *
 * PARAMETERS:  node                - Namespace node for the device
 *              space_id            - The address space ID
 *
 * RETURN:      TRUE if default handler is installed, FALSE otherwise
 *
 * DESCRIPTION: Check if the default handler is installed for the requested
 *              space ID.
 *
 ******************************************************************************/

u8
acpi_ev_has_default_handler(struct acpi_namespace_node *node,
			    acpi_adr_space_type space_id)
{
	union acpi_operand_object *obj_desc;
	union acpi_operand_object *handler_obj;

	/* Must have an existing internal object */

	obj_desc = acpi_ns_get_attached_object(node);
	if (obj_desc) {
		handler_obj = obj_desc->device.handler;

		/* Walk the linked list of handlers for this object */

		while (handler_obj) {
			if (handler_obj->address_space.space_id == space_id) {
				if (handler_obj->address_space.handler_flags &
				    ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
					return (TRUE);
				}
			}

			handler_obj = handler_obj->address_space.next;
		}
	}

	return (FALSE);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_install_handler
 *
 * PARAMETERS:  walk_namespace callback
 *
 * DESCRIPTION: This routine installs an address handler into objects that are
 *              of type Region or Device.
 *
 *              If the Object is a Device, and the device has a handler of
 *              the same type then the search is terminated in that branch.
 *
 *              This is because the existing handler is closer in proximity
 *              to any more regions than the one we are trying to install.
 *
 ******************************************************************************/

static acpi_status
acpi_ev_install_handler(acpi_handle obj_handle,
			u32 level, void *context, void **return_value)
{
	union acpi_operand_object *handler_obj;
	union acpi_operand_object *next_handler_obj;
	union acpi_operand_object *obj_desc;
	struct acpi_namespace_node *node;
	acpi_status status;

	ACPI_FUNCTION_NAME(ev_install_handler);

	handler_obj = (union acpi_operand_object *)context;

	/* Parameter validation */

	if (!handler_obj) {
		return (AE_OK);
	}

	/* Convert and validate the device handle */

	node = acpi_ns_validate_handle(obj_handle);
	if (!node) {
		return (AE_BAD_PARAMETER);
	}

	/*
	 * We only care about regions and objects that are allowed to have
	 * address space handlers
	 */
	if ((node->type != ACPI_TYPE_DEVICE) &&
	    (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
		return (AE_OK);
	}

	/* Check for an existing internal object */

	obj_desc = acpi_ns_get_attached_object(node);
	if (!obj_desc) {

		/* No object, just exit */

		return (AE_OK);
	}

	/* Devices are handled different than regions */

	if (obj_desc->common.type == ACPI_TYPE_DEVICE) {

		/* Check if this Device already has a handler for this address space */

		next_handler_obj = obj_desc->device.handler;
		while (next_handler_obj) {

			/* Found a handler, is it for the same address space? */

			if (next_handler_obj->address_space.space_id ==
			    handler_obj->address_space.space_id) {
				ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
						  "Found handler for region [%s] in device %p(%p) "
						  "handler %p\n",
						  acpi_ut_get_region_name
						  (handler_obj->address_space.
						   space_id), obj_desc,
						  next_handler_obj,
						  handler_obj));

				/*
				 * Since the object we found it on was a device, then it
				 * means that someone has already installed a handler for
				 * the branch of the namespace from this device on. Just
				 * bail out telling the walk routine to not traverse this
				 * branch. This preserves the scoping rule for handlers.
				 */
				return (AE_CTRL_DEPTH);
			}

			/* Walk the linked list of handlers attached to this device */

			next_handler_obj = next_handler_obj->address_space.next;
		}

		/*
		 * As long as the device didn't have a handler for this space we
		 * don't care about it. We just ignore it and proceed.
		 */
		return (AE_OK);
	}

	/* Object is a Region */

	if (obj_desc->region.space_id != handler_obj->address_space.space_id) {

		/* This region is for a different address space, just ignore it */

		return (AE_OK);
	}

	/*
	 * Now we have a region and it is for the handler's address space type.
	 *
	 * First disconnect region for any previous handler (if any)
	 */
	acpi_ev_detach_region(obj_desc, FALSE);

	/* Connect the region to the new handler */

	status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
	return (status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_install_space_handler
 *
 * PARAMETERS:  node            - Namespace node for the device
 *              space_id        - The address space ID
 *              handler         - Address of the handler
 *              setup           - Address of the setup function
 *              context         - Value passed to the handler on each access
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Install a handler for all op_regions of a given space_id.
 *              Assumes namespace is locked
 *
 ******************************************************************************/

acpi_status
acpi_ev_install_space_handler(struct acpi_namespace_node * node,
			      acpi_adr_space_type space_id,
			      acpi_adr_space_handler handler,
			      acpi_adr_space_setup setup, void *context)
{
	union acpi_operand_object *obj_desc;
	union acpi_operand_object *handler_obj;
	acpi_status status;
	acpi_object_type type;
	u8 flags = 0;

	ACPI_FUNCTION_TRACE(ev_install_space_handler);

	/*
	 * This registration is valid for only the types below and the root. This
	 * is where the default handlers get placed.
	 */
	if ((node->type != ACPI_TYPE_DEVICE) &&
	    (node->type != ACPI_TYPE_PROCESSOR) &&
	    (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
		status = AE_BAD_PARAMETER;
		goto unlock_and_exit;
	}

	if (handler == ACPI_DEFAULT_HANDLER) {
		flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;

		switch (space_id) {
		case ACPI_ADR_SPACE_SYSTEM_MEMORY:
			handler = acpi_ex_system_memory_space_handler;
			setup = acpi_ev_system_memory_region_setup;
			break;

		case ACPI_ADR_SPACE_SYSTEM_IO:
			handler = acpi_ex_system_io_space_handler;
			setup = acpi_ev_io_space_region_setup;
			break;

		case ACPI_ADR_SPACE_PCI_CONFIG:
			handler = acpi_ex_pci_config_space_handler;
			setup = acpi_ev_pci_config_region_setup;
			break;

		case ACPI_ADR_SPACE_CMOS:
			handler = acpi_ex_cmos_space_handler;
			setup = acpi_ev_cmos_region_setup;
			break;

		case ACPI_ADR_SPACE_PCI_BAR_TARGET:
			handler = acpi_ex_pci_bar_space_handler;
			setup = acpi_ev_pci_bar_region_setup;
			break;

		case ACPI_ADR_SPACE_DATA_TABLE:
			handler = acpi_ex_data_table_space_handler;
			setup = NULL;
			break;

		default:
			status = AE_BAD_PARAMETER;
			goto unlock_and_exit;
		}
	}

	/* If the caller hasn't specified a setup routine, use the default */

	if (!setup) {
		setup = acpi_ev_default_region_setup;
	}

	/* Check for an existing internal object */

	obj_desc = acpi_ns_get_attached_object(node);
	if (obj_desc) {
		/*
		 * The attached device object already exists. Make sure the handler
		 * is not already installed.
		 */
		handler_obj = obj_desc->device.handler;

		/* Walk the handler list for this device */

		while (handler_obj) {

			/* Same space_id indicates a handler already installed */

			if (handler_obj->address_space.space_id == space_id) {
				if (handler_obj->address_space.handler ==
				    handler) {
					/*
					 * It is (relatively) OK to attempt to install the SAME
					 * handler twice. This can easily happen with the
					 * PCI_Config space.
					 */
					status = AE_SAME_HANDLER;
					goto unlock_and_exit;
				} else {
					/* A handler is already installed */

					status = AE_ALREADY_EXISTS;
				}
				goto unlock_and_exit;
			}

			/* Walk the linked list of handlers */

			handler_obj = handler_obj->address_space.next;
		}
	} else {
		ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
				  "Creating object on Device %p while installing handler\n",
				  node));

		/* obj_desc does not exist, create one */

		if (node->type == ACPI_TYPE_ANY) {
			type = ACPI_TYPE_DEVICE;
		} else {
			type = node->type;
		}

		obj_desc = acpi_ut_create_internal_object(type);
		if (!obj_desc) {
			status = AE_NO_MEMORY;
			goto unlock_and_exit;
		}

		/* Init new descriptor */

		obj_desc->common.type = (u8)type;

		/* Attach the new object to the Node */

		status = acpi_ns_attach_object(node, obj_desc, type);

		/* Remove local reference to the object */

		acpi_ut_remove_reference(obj_desc);

		if (ACPI_FAILURE(status)) {
			goto unlock_and_exit;
		}
	}

	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
			  "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
			  acpi_ut_get_region_name(space_id), space_id,
			  acpi_ut_get_node_name(node), node, obj_desc));

	/*
	 * Install the handler
	 *
	 * At this point there is no existing handler. Just allocate the object
	 * for the handler and link it into the list.
	 */
	handler_obj =
	    acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
	if (!handler_obj) {
		status = AE_NO_MEMORY;
		goto unlock_and_exit;
	}

	/* Init handler obj */

	handler_obj->address_space.space_id = (u8)space_id;
	handler_obj->address_space.handler_flags = flags;
	handler_obj->address_space.region_list = NULL;
	handler_obj->address_space.node = node;
	handler_obj->address_space.handler = handler;
	handler_obj->address_space.context = context;
	handler_obj->address_space.setup = setup;

	/* Install at head of Device.address_space list */

	handler_obj->address_space.next = obj_desc->device.handler;

	/*
	 * The Device object is the first reference on the handler_obj.
	 * Each region that uses the handler adds a reference.
	 */
	obj_desc->device.handler = handler_obj;

	/*
	 * Walk the namespace finding all of the regions this
	 * handler will manage.
	 *
	 * Start at the device and search the branch toward
	 * the leaf nodes until either the leaf is encountered or
	 * a device is detected that has an address handler of the
	 * same type.
	 *
	 * In either case, back up and search down the remainder
	 * of the branch
	 */
	status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
					ACPI_NS_WALK_UNLOCK,
					acpi_ev_install_handler, NULL,
					handler_obj, NULL);

      unlock_and_exit:
	return_ACPI_STATUS(status);
}
Commit	Line	Data
42f8fb75 BM	1	/******************************************************************************
	2	*
	3	* Module Name: evhandler - Support for Address Space handlers
	4	*
	5	*****************************************************************************/
	6
	7	/*
25f044e6	8	* Copyright (C) 2000 - 2013, Intel Corp.
42f8fb75 BM	9	* All rights reserved.
	10	*
	11	* Redistribution and use in source and binary forms, with or without
	12	* modification, are permitted provided that the following conditions
	13	* are met:
	14	* 1. Redistributions of source code must retain the above copyright
	15	* notice, this list of conditions, and the following disclaimer,
	16	* without modification.
	17	* 2. Redistributions in binary form must reproduce at minimum a disclaimer
	18	* substantially similar to the "NO WARRANTY" disclaimer below
	19	* ("Disclaimer") and any redistribution must be conditioned upon
	20	* including a substantially similar Disclaimer requirement for further
	21	* binary redistribution.
	22	* 3. Neither the names of the above-listed copyright holders nor the names
	23	* of any contributors may be used to endorse or promote products derived
	24	* from this software without specific prior written permission.
	25	*
	26	* Alternatively, this software may be distributed under the terms of the
	27	* GNU General Public License ("GPL") version 2 as published by the Free
	28	* Software Foundation.
	29	*
	30	* NO WARRANTY
	31	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	32	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	33	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
	34	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	35	* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	36	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	37	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	38	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	39	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
	40	* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	41	* POSSIBILITY OF SUCH DAMAGES.
	42	*/
	43
	44	#include <acpi/acpi.h>
	45	#include "accommon.h"
	46	#include "acevents.h"
	47	#include "acnamesp.h"
	48	#include "acinterp.h"
	49
	50	#define _COMPONENT ACPI_EVENTS
	51	ACPI_MODULE_NAME("evhandler")
	52
	53	/* Local prototypes */
	54	static acpi_status
	55	acpi_ev_install_handler(acpi_handle obj_handle,
	56	u32 level, void context, void *return_value);
	57
	58	/* These are the address spaces that will get default handlers */
	59
	60	u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
	61	ACPI_ADR_SPACE_SYSTEM_MEMORY,
	62	ACPI_ADR_SPACE_SYSTEM_IO,
	63	ACPI_ADR_SPACE_PCI_CONFIG,
	64	ACPI_ADR_SPACE_DATA_TABLE
	65	};
	66
	67	/*******************************************************************************
	68	*
	69	* FUNCTION: acpi_ev_install_region_handlers
	70	*
	71	* PARAMETERS: None
	72	*
73	* RETURN: Status
74	*
75	* DESCRIPTION: Installs the core subsystem default address space handlers.
76	*
77	******************************************************************************/
78
79	acpi_status acpi_ev_install_region_handlers(void)
80	{
81	acpi_status status;
82	u32 i;
83
84	ACPI_FUNCTION_TRACE(ev_install_region_handlers);
85
86	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
87	if (ACPI_FAILURE(status)) {
88	return_ACPI_STATUS(status);
89	}
90
91	/*
92	* All address spaces (PCI Config, EC, SMBus) are scope dependent and
93	* registration must occur for a specific device.
94	*
95	* In the case of the system memory and IO address spaces there is
96	* currently no device associated with the address space. For these we
97	* use the root.
98	*
99	* We install the default PCI config space handler at the root so that
100	* this space is immediately available even though the we have not
101	* enumerated all the PCI Root Buses yet. This is to conform to the ACPI
102	* specification which states that the PCI config space must be always
103	* available -- even though we are nowhere near ready to find the PCI root
104	* buses at this point.
105	*
106	* NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
107	* has already been installed (via acpi_install_address_space_handler).
108	* Similar for AE_SAME_HANDLER.
109	*/
110	for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
111	status = acpi_ev_install_space_handler(acpi_gbl_root_node,
112	acpi_gbl_default_address_spaces
113	[i],
114	ACPI_DEFAULT_HANDLER,
115	NULL, NULL);
116	switch (status) {
117	case AE_OK:
118	case AE_SAME_HANDLER:
119	case AE_ALREADY_EXISTS:
120
121	/* These exceptions are all OK */
122
123	status = AE_OK;
124	break;
125
126	default:
127
128	goto unlock_and_exit;
129	}
130	}
131
132	unlock_and_exit:
133	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
134	return_ACPI_STATUS(status);
135	}
136
137	/*******************************************************************************
138	*
139	* FUNCTION: acpi_ev_has_default_handler
140	*
141	* PARAMETERS: node - Namespace node for the device
142	* space_id - The address space ID
143	*
144	* RETURN: TRUE if default handler is installed, FALSE otherwise
145	*
146	* DESCRIPTION: Check if the default handler is installed for the requested
147	* space ID.
148	*
149	******************************************************************************/
150
151	u8
152	acpi_ev_has_default_handler(struct acpi_namespace_node *node,
153	acpi_adr_space_type space_id)
154	{
155	union acpi_operand_object *obj_desc;
156	union acpi_operand_object *handler_obj;
157
158	/* Must have an existing internal object */
159
160	obj_desc = acpi_ns_get_attached_object(node);
161	if (obj_desc) {
162	handler_obj = obj_desc->device.handler;
163
164	/* Walk the linked list of handlers for this object */
165
166	while (handler_obj) {
167	if (handler_obj->address_space.space_id == space_id) {
168	if (handler_obj->address_space.handler_flags &
169	ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
170	return (TRUE);
171	}
172	}
173
174	handler_obj = handler_obj->address_space.next;
175	}
176	}
177
178	return (FALSE);
179	}
180
181	/*******************************************************************************
182	*
183	* FUNCTION: acpi_ev_install_handler
184	*
185	* PARAMETERS: walk_namespace callback
186	*
187	* DESCRIPTION: This routine installs an address handler into objects that are
188	* of type Region or Device.
189	*
190	* If the Object is a Device, and the device has a handler of
191	* the same type then the search is terminated in that branch.
192	*
193	* This is because the existing handler is closer in proximity
194	* to any more regions than the one we are trying to install.
195	*
196	******************************************************************************/
197
198	static acpi_status
199	acpi_ev_install_handler(acpi_handle obj_handle,
200	u32 level, void context, void *return_value)
201	{
202	union acpi_operand_object *handler_obj;
203	union acpi_operand_object *next_handler_obj;
204	union acpi_operand_object *obj_desc;
205	struct acpi_namespace_node *node;
206	acpi_status status;
207
208	ACPI_FUNCTION_NAME(ev_install_handler);
209
210	handler_obj = (union acpi_operand_object *)context;
211
212	/* Parameter validation */
213
214	if (!handler_obj) {
215	return (AE_OK);
216	}
217
218	/* Convert and validate the device handle */
219
220	node = acpi_ns_validate_handle(obj_handle);
221	if (!node) {
222	return (AE_BAD_PARAMETER);
223	}
224
225	/*
226	* We only care about regions and objects that are allowed to have
227	* address space handlers
228	*/
229	if ((node->type != ACPI_TYPE_DEVICE) &&
230	(node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
231	return (AE_OK);
232	}
233
234	/* Check for an existing internal object */
235
236	obj_desc = acpi_ns_get_attached_object(node);
237	if (!obj_desc) {
238
239	/* No object, just exit */
240
241	return (AE_OK);
242	}
243
244	/* Devices are handled different than regions */
245
246	if (obj_desc->common.type == ACPI_TYPE_DEVICE) {
247
248	/* Check if this Device already has a handler for this address space */
249
250	next_handler_obj = obj_desc->device.handler;
251	while (next_handler_obj) {
252
253	/* Found a handler, is it for the same address space? */
254
255	if (next_handler_obj->address_space.space_id ==
256	handler_obj->address_space.space_id) {
257	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
258	"Found handler for region [%s] in device %p(%p) "
259	"handler %p\n",
260	acpi_ut_get_region_name
261	(handler_obj->address_space.
262	space_id), obj_desc,
263	next_handler_obj,
264	handler_obj));
265
266	/*
267	* Since the object we found it on was a device, then it
268	* means that someone has already installed a handler for
269	* the branch of the namespace from this device on. Just
270	* bail out telling the walk routine to not traverse this
271	* branch. This preserves the scoping rule for handlers.
272	*/
273	return (AE_CTRL_DEPTH);
274	}
275
276	/* Walk the linked list of handlers attached to this device */
277
278	next_handler_obj = next_handler_obj->address_space.next;
279	}
280
281	/*
282	* As long as the device didn't have a handler for this space we
283	* don't care about it. We just ignore it and proceed.
284	*/
285	return (AE_OK);
286	}
287
288	/* Object is a Region */
289
290	if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
291
292	/* This region is for a different address space, just ignore it */
293
294	return (AE_OK);
295	}
296
297	/*
298	* Now we have a region and it is for the handler's address space type.
299	*
300	* First disconnect region for any previous handler (if any)
301	*/
302	acpi_ev_detach_region(obj_desc, FALSE);
303
304	/* Connect the region to the new handler */
305
306	status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
307	return (status);
308	}
309
310	/*******************************************************************************
311	*
312	* FUNCTION: acpi_ev_install_space_handler
313	*
314	* PARAMETERS: node - Namespace node for the device
315	* space_id - The address space ID
316	* handler - Address of the handler
317	* setup - Address of the setup function
318	* context - Value passed to the handler on each access
319	*
320	* RETURN: Status
321	*
322	* DESCRIPTION: Install a handler for all op_regions of a given space_id.
323	* Assumes namespace is locked
324	*
325	******************************************************************************/
326
327	acpi_status
328	acpi_ev_install_space_handler(struct acpi_namespace_node * node,
329	acpi_adr_space_type space_id,
330	acpi_adr_space_handler handler,
331	acpi_adr_space_setup setup, void *context)
332	{
333	union acpi_operand_object *obj_desc;
334	union acpi_operand_object *handler_obj;
335	acpi_status status;
336	acpi_object_type type;
337	u8 flags = 0;
338
339	ACPI_FUNCTION_TRACE(ev_install_space_handler);
340
341	/*
342	* This registration is valid for only the types below and the root. This
343	* is where the default handlers get placed.
344	*/
345	if ((node->type != ACPI_TYPE_DEVICE) &&
346	(node->type != ACPI_TYPE_PROCESSOR) &&
347	(node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
348	status = AE_BAD_PARAMETER;
349	goto unlock_and_exit;
350	}
351
352	if (handler == ACPI_DEFAULT_HANDLER) {
353	flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;
354
355	switch (space_id) {
356	case ACPI_ADR_SPACE_SYSTEM_MEMORY:
357	handler = acpi_ex_system_memory_space_handler;
358	setup = acpi_ev_system_memory_region_setup;
359	break;
360
361	case ACPI_ADR_SPACE_SYSTEM_IO:
362	handler = acpi_ex_system_io_space_handler;
363	setup = acpi_ev_io_space_region_setup;
364	break;
365
366	case ACPI_ADR_SPACE_PCI_CONFIG:
367	handler = acpi_ex_pci_config_space_handler;
368	setup = acpi_ev_pci_config_region_setup;
369	break;
370
371	case ACPI_ADR_SPACE_CMOS:
372	handler = acpi_ex_cmos_space_handler;
373	setup = acpi_ev_cmos_region_setup;
374	break;
375
376	case ACPI_ADR_SPACE_PCI_BAR_TARGET:
377	handler = acpi_ex_pci_bar_space_handler;
378	setup = acpi_ev_pci_bar_region_setup;
379	break;
380
381	case ACPI_ADR_SPACE_DATA_TABLE:
382	handler = acpi_ex_data_table_space_handler;
383	setup = NULL;
384	break;
385
386	default:
387	status = AE_BAD_PARAMETER;
388	goto unlock_and_exit;
389	}
390	}
391
392	/* If the caller hasn't specified a setup routine, use the default */
393
394	if (!setup) {
395	setup = acpi_ev_default_region_setup;
396	}
397
398	/* Check for an existing internal object */
399
400	obj_desc = acpi_ns_get_attached_object(node);
401	if (obj_desc) {
402	/*
403	* The attached device object already exists. Make sure the handler
404	* is not already installed.
405	*/
406	handler_obj = obj_desc->device.handler;
407
408	/* Walk the handler list for this device */
409
410	while (handler_obj) {
411
412	/* Same space_id indicates a handler already installed */
413
414	if (handler_obj->address_space.space_id == space_id) {
415	if (handler_obj->address_space.handler ==
416	handler) {
417	/*
418	* It is (relatively) OK to attempt to install the SAME
419	* handler twice. This can easily happen with the
420	* PCI_Config space.
421	*/
422	status = AE_SAME_HANDLER;
423	goto unlock_and_exit;
424	} else {
425	/* A handler is already installed */
426
427	status = AE_ALREADY_EXISTS;
428	}
429	goto unlock_and_exit;
430	}
431
432	/* Walk the linked list of handlers */
433
434	handler_obj = handler_obj->address_space.next;
435	}
436	} else {
437	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
438	"Creating object on Device %p while installing handler\n",
439	node));
440
441	/* obj_desc does not exist, create one */
442
443	if (node->type == ACPI_TYPE_ANY) {
444	type = ACPI_TYPE_DEVICE;
445	} else {
446	type = node->type;
447	}
448
449	obj_desc = acpi_ut_create_internal_object(type);
450	if (!obj_desc) {
451	status = AE_NO_MEMORY;
452	goto unlock_and_exit;
453	}
454
455	/* Init new descriptor */
456
457	obj_desc->common.type = (u8)type;
458
459	/* Attach the new object to the Node */
460
461	status = acpi_ns_attach_object(node, obj_desc, type);
462
463	/* Remove local reference to the object */
464
465	acpi_ut_remove_reference(obj_desc);
466
467	if (ACPI_FAILURE(status)) {
468	goto unlock_and_exit;
469	}
470	}
471
472	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
473	"Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
474	acpi_ut_get_region_name(space_id), space_id,
475	acpi_ut_get_node_name(node), node, obj_desc));
476
477	/*
478	* Install the handler
479	*
480	* At this point there is no existing handler. Just allocate the object
481	* for the handler and link it into the list.
482	*/
483	handler_obj =
484	acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
485	if (!handler_obj) {
486	status = AE_NO_MEMORY;
487	goto unlock_and_exit;
488	}
489
490	/* Init handler obj */
491
492	handler_obj->address_space.space_id = (u8)space_id;
493	handler_obj->address_space.handler_flags = flags;
494	handler_obj->address_space.region_list = NULL;
495	handler_obj->address_space.node = node;
496	handler_obj->address_space.handler = handler;
497	handler_obj->address_space.context = context;
498	handler_obj->address_space.setup = setup;
499
500	/* Install at head of Device.address_space list */
501
502	handler_obj->address_space.next = obj_desc->device.handler;
503
504	/*
505	* The Device object is the first reference on the handler_obj.
506	* Each region that uses the handler adds a reference.
507	*/
508	obj_desc->device.handler = handler_obj;
509
510	/*
511	* Walk the namespace finding all of the regions this
512	* handler will manage.
513	*
514	* Start at the device and search the branch toward
515	* the leaf nodes until either the leaf is encountered or
516	* a device is detected that has an address handler of the
517	* same type.
518	*
519	* In either case, back up and search down the remainder
520	* of the branch
521	*/
522	status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
523	ACPI_NS_WALK_UNLOCK,
524	acpi_ev_install_handler, NULL,
525	handler_obj, NULL);
526
527	unlock_and_exit:
528	return_ACPI_STATUS(status);
529	}