]>
Commit | Line | Data |
---|---|---|
1ccea77e | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
81d01bfa LH |
2 | /* |
3 | * AppliedMicro X-Gene SoC SATA Host Controller Driver | |
4 | * | |
5 | * Copyright (c) 2014, Applied Micro Circuits Corporation | |
6 | * Author: Loc Ho <lho@apm.com> | |
7 | * Tuan Phan <tphan@apm.com> | |
8 | * Suman Tripathi <stripathi@apm.com> | |
9 | * | |
81d01bfa | 10 | * NOTE: PM support is not currently available. |
81d01bfa | 11 | */ |
92b5bf98 | 12 | #include <linux/acpi.h> |
81d01bfa LH |
13 | #include <linux/module.h> |
14 | #include <linux/platform_device.h> | |
15 | #include <linux/ahci_platform.h> | |
16 | #include <linux/of_address.h> | |
c9802a4b | 17 | #include <linux/of_device.h> |
81d01bfa LH |
18 | #include <linux/of_irq.h> |
19 | #include <linux/phy/phy.h> | |
20 | #include "ahci.h" | |
21 | ||
018d5ef2 AM |
22 | #define DRV_NAME "xgene-ahci" |
23 | ||
81d01bfa LH |
24 | /* Max # of disk per a controller */ |
25 | #define MAX_AHCI_CHN_PERCTR 2 | |
26 | ||
27 | /* MUX CSR */ | |
28 | #define SATA_ENET_CONFIG_REG 0x00000000 | |
29 | #define CFG_SATA_ENET_SELECT_MASK 0x00000001 | |
30 | ||
31 | /* SATA core host controller CSR */ | |
32 | #define SLVRDERRATTRIBUTES 0x00000000 | |
33 | #define SLVWRERRATTRIBUTES 0x00000004 | |
34 | #define MSTRDERRATTRIBUTES 0x00000008 | |
35 | #define MSTWRERRATTRIBUTES 0x0000000c | |
36 | #define BUSCTLREG 0x00000014 | |
37 | #define IOFMSTRWAUX 0x00000018 | |
38 | #define INTSTATUSMASK 0x0000002c | |
39 | #define ERRINTSTATUS 0x00000030 | |
40 | #define ERRINTSTATUSMASK 0x00000034 | |
41 | ||
42 | /* SATA host AHCI CSR */ | |
43 | #define PORTCFG 0x000000a4 | |
44 | #define PORTADDR_SET(dst, src) \ | |
45 | (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) | |
46 | #define PORTPHY1CFG 0x000000a8 | |
47 | #define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ | |
48 | (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) | |
49 | #define PORTPHY2CFG 0x000000ac | |
50 | #define PORTPHY3CFG 0x000000b0 | |
51 | #define PORTPHY4CFG 0x000000b4 | |
52 | #define PORTPHY5CFG 0x000000b8 | |
53 | #define SCTL0 0x0000012C | |
54 | #define PORTPHY5CFG_RTCHG_SET(dst, src) \ | |
55 | (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) | |
56 | #define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ | |
57 | (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) | |
58 | #define PORTAXICFG 0x000000bc | |
59 | #define PORTAXICFG_OUTTRANS_SET(dst, src) \ | |
60 | (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) | |
aeae4dca ST |
61 | #define PORTRANSCFG 0x000000c8 |
62 | #define PORTRANSCFG_RXWM_SET(dst, src) \ | |
63 | (((dst) & ~0x0000007f) | (((u32)(src)) & 0x0000007f)) | |
81d01bfa LH |
64 | |
65 | /* SATA host controller AXI CSR */ | |
66 | #define INT_SLV_TMOMASK 0x00000010 | |
67 | ||
68 | /* SATA diagnostic CSR */ | |
69 | #define CFG_MEM_RAM_SHUTDOWN 0x00000070 | |
70 | #define BLOCK_MEM_RDY 0x00000074 | |
71 | ||
0babe614 ST |
72 | /* Max retry for link down */ |
73 | #define MAX_LINK_DOWN_RETRY 3 | |
74 | ||
c9802a4b ST |
75 | enum xgene_ahci_version { |
76 | XGENE_AHCI_V1 = 1, | |
77 | XGENE_AHCI_V2, | |
78 | }; | |
79 | ||
81d01bfa LH |
80 | struct xgene_ahci_context { |
81 | struct ahci_host_priv *hpriv; | |
82 | struct device *dev; | |
2a0bdff6 | 83 | u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ |
a3a84bc7 | 84 | u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */ |
81d01bfa LH |
85 | void __iomem *csr_core; /* Core CSR address of IP */ |
86 | void __iomem *csr_diag; /* Diag CSR address of IP */ | |
87 | void __iomem *csr_axi; /* AXI CSR address of IP */ | |
88 | void __iomem *csr_mux; /* MUX CSR address of IP */ | |
89 | }; | |
90 | ||
91 | static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) | |
92 | { | |
93 | dev_dbg(ctx->dev, "Release memory from shutdown\n"); | |
94 | writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); | |
95 | readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ | |
96 | msleep(1); /* reset may take up to 1ms */ | |
97 | if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) { | |
98 | dev_err(ctx->dev, "failed to release memory from shutdown\n"); | |
99 | return -ENODEV; | |
100 | } | |
101 | return 0; | |
102 | } | |
103 | ||
1540035d ST |
104 | /** |
105 | * xgene_ahci_poll_reg_val- Poll a register on a specific value. | |
106 | * @ap : ATA port of interest. | |
107 | * @reg : Register of interest. | |
108 | * @val : Value to be attained. | |
109 | * @interval : waiting interval for polling. | |
110 | * @timeout : timeout for achieving the value. | |
111 | */ | |
112 | static int xgene_ahci_poll_reg_val(struct ata_port *ap, | |
113 | void __iomem *reg, unsigned | |
114 | int val, unsigned long interval, | |
115 | unsigned long timeout) | |
116 | { | |
117 | unsigned long deadline; | |
118 | unsigned int tmp; | |
119 | ||
120 | tmp = ioread32(reg); | |
121 | deadline = ata_deadline(jiffies, timeout); | |
122 | ||
123 | while (tmp != val && time_before(jiffies, deadline)) { | |
124 | ata_msleep(ap, interval); | |
125 | tmp = ioread32(reg); | |
126 | } | |
127 | ||
128 | return tmp; | |
129 | } | |
130 | ||
2a0bdff6 ST |
131 | /** |
132 | * xgene_ahci_restart_engine - Restart the dma engine. | |
133 | * @ap : ATA port of interest | |
134 | * | |
1540035d ST |
135 | * Waits for completion of multiple commands and restarts |
136 | * the DMA engine inside the controller. | |
2a0bdff6 ST |
137 | */ |
138 | static int xgene_ahci_restart_engine(struct ata_port *ap) | |
139 | { | |
140 | struct ahci_host_priv *hpriv = ap->host->private_data; | |
1540035d ST |
141 | struct ahci_port_priv *pp = ap->private_data; |
142 | void __iomem *port_mmio = ahci_port_base(ap); | |
143 | u32 fbs; | |
144 | ||
145 | /* | |
146 | * In case of PMP multiple IDENTIFY DEVICE commands can be | |
147 | * issued inside PxCI. So need to poll PxCI for the | |
148 | * completion of outstanding IDENTIFY DEVICE commands before | |
149 | * we restart the DMA engine. | |
150 | */ | |
151 | if (xgene_ahci_poll_reg_val(ap, port_mmio + | |
152 | PORT_CMD_ISSUE, 0x0, 1, 100)) | |
153 | return -EBUSY; | |
2a0bdff6 | 154 | |
fa89f53b | 155 | hpriv->stop_engine(ap); |
2a0bdff6 | 156 | ahci_start_fis_rx(ap); |
1540035d ST |
157 | |
158 | /* | |
159 | * Enable the PxFBS.FBS_EN bit as it | |
160 | * gets cleared due to stopping the engine. | |
161 | */ | |
162 | if (pp->fbs_supported) { | |
163 | fbs = readl(port_mmio + PORT_FBS); | |
164 | writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); | |
165 | fbs = readl(port_mmio + PORT_FBS); | |
166 | } | |
167 | ||
2a0bdff6 ST |
168 | hpriv->start_engine(ap); |
169 | ||
170 | return 0; | |
171 | } | |
172 | ||
173 | /** | |
174 | * xgene_ahci_qc_issue - Issue commands to the device | |
175 | * @qc: Command to issue | |
176 | * | |
a3a84bc7 ST |
177 | * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot |
178 | * clear the BSY bit after receiving the PIO setup FIS. This results in the dma | |
179 | * state machine goes into the CMFatalErrorUpdate state and locks up. By | |
180 | * restarting the dma engine, it removes the controller out of lock up state. | |
181 | * | |
182 | * Due to H/W errata, the controller is unable to save the PMP | |
183 | * field fetched from command header before sending the H2D FIS. | |
184 | * When the device returns the PMP port field in the D2H FIS, there is | |
185 | * a mismatch and results in command completion failure. The | |
186 | * workaround is to write the pmp value to PxFBS.DEV field before issuing | |
187 | * any command to PMP. | |
2a0bdff6 ST |
188 | */ |
189 | static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) | |
190 | { | |
191 | struct ata_port *ap = qc->ap; | |
192 | struct ahci_host_priv *hpriv = ap->host->private_data; | |
193 | struct xgene_ahci_context *ctx = hpriv->plat_data; | |
194 | int rc = 0; | |
a3a84bc7 ST |
195 | u32 port_fbs; |
196 | void *port_mmio = ahci_port_base(ap); | |
197 | ||
198 | /* | |
199 | * Write the pmp value to PxFBS.DEV | |
200 | * for case of Port Mulitplier. | |
201 | */ | |
202 | if (ctx->class[ap->port_no] == ATA_DEV_PMP) { | |
203 | port_fbs = readl(port_mmio + PORT_FBS); | |
204 | port_fbs &= ~PORT_FBS_DEV_MASK; | |
205 | port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; | |
206 | writel(port_fbs, port_mmio + PORT_FBS); | |
207 | } | |
2a0bdff6 | 208 | |
1102407b | 209 | if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) || |
09c32aaa ST |
210 | (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) || |
211 | (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))) | |
2a0bdff6 ST |
212 | xgene_ahci_restart_engine(ap); |
213 | ||
214 | rc = ahci_qc_issue(qc); | |
215 | ||
216 | /* Save the last command issued */ | |
217 | ctx->last_cmd[ap->port_no] = qc->tf.command; | |
218 | ||
219 | return rc; | |
220 | } | |
221 | ||
0bed13be ST |
222 | static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx) |
223 | { | |
224 | void __iomem *diagcsr = ctx->csr_diag; | |
225 | ||
226 | return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 && | |
227 | readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF); | |
228 | } | |
229 | ||
81d01bfa LH |
230 | /** |
231 | * xgene_ahci_read_id - Read ID data from the specified device | |
232 | * @dev: device | |
233 | * @tf: proposed taskfile | |
234 | * @id: data buffer | |
235 | * | |
236 | * This custom read ID function is required due to the fact that the HW | |
2a0bdff6 | 237 | * does not support DEVSLP. |
81d01bfa LH |
238 | */ |
239 | static unsigned int xgene_ahci_read_id(struct ata_device *dev, | |
240 | struct ata_taskfile *tf, u16 *id) | |
241 | { | |
242 | u32 err_mask; | |
81d01bfa LH |
243 | |
244 | err_mask = ata_do_dev_read_id(dev, tf, id); | |
245 | if (err_mask) | |
246 | return err_mask; | |
247 | ||
248 | /* | |
249 | * Mask reserved area. Word78 spec of Link Power Management | |
250 | * bit15-8: reserved | |
251 | * bit7: NCQ autosence | |
252 | * bit6: Software settings preservation supported | |
253 | * bit5: reserved | |
254 | * bit4: In-order sata delivery supported | |
255 | * bit3: DIPM requests supported | |
256 | * bit2: DMA Setup FIS Auto-Activate optimization supported | |
257 | * bit1: DMA Setup FIX non-Zero buffer offsets supported | |
258 | * bit0: Reserved | |
259 | * | |
260 | * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP | |
261 | */ | |
5c0b8e0d | 262 | id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8)); |
81d01bfa | 263 | |
81d01bfa LH |
264 | return 0; |
265 | } | |
266 | ||
267 | static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) | |
268 | { | |
269 | void __iomem *mmio = ctx->hpriv->mmio; | |
270 | u32 val; | |
271 | ||
272 | dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", | |
273 | mmio, channel); | |
274 | val = readl(mmio + PORTCFG); | |
275 | val = PORTADDR_SET(val, channel == 0 ? 2 : 3); | |
276 | writel(val, mmio + PORTCFG); | |
277 | readl(mmio + PORTCFG); /* Force a barrier */ | |
278 | /* Disable fix rate */ | |
279 | writel(0x0001fffe, mmio + PORTPHY1CFG); | |
280 | readl(mmio + PORTPHY1CFG); /* Force a barrier */ | |
0185b1b7 | 281 | writel(0x28183219, mmio + PORTPHY2CFG); |
81d01bfa | 282 | readl(mmio + PORTPHY2CFG); /* Force a barrier */ |
0185b1b7 | 283 | writel(0x13081008, mmio + PORTPHY3CFG); |
81d01bfa | 284 | readl(mmio + PORTPHY3CFG); /* Force a barrier */ |
0185b1b7 | 285 | writel(0x00480815, mmio + PORTPHY4CFG); |
81d01bfa LH |
286 | readl(mmio + PORTPHY4CFG); /* Force a barrier */ |
287 | /* Set window negotiation */ | |
288 | val = readl(mmio + PORTPHY5CFG); | |
289 | val = PORTPHY5CFG_RTCHG_SET(val, 0x300); | |
290 | writel(val, mmio + PORTPHY5CFG); | |
291 | readl(mmio + PORTPHY5CFG); /* Force a barrier */ | |
292 | val = readl(mmio + PORTAXICFG); | |
293 | val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ | |
294 | val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ | |
295 | writel(val, mmio + PORTAXICFG); | |
296 | readl(mmio + PORTAXICFG); /* Force a barrier */ | |
aeae4dca ST |
297 | /* Set the watermark threshold of the receive FIFO */ |
298 | val = readl(mmio + PORTRANSCFG); | |
299 | val = PORTRANSCFG_RXWM_SET(val, 0x30); | |
300 | writel(val, mmio + PORTRANSCFG); | |
81d01bfa LH |
301 | } |
302 | ||
303 | /** | |
304 | * xgene_ahci_do_hardreset - Issue the actual COMRESET | |
305 | * @link: link to reset | |
306 | * @deadline: deadline jiffies for the operation | |
307 | * @online: Return value to indicate if device online | |
308 | * | |
309 | * Due to the limitation of the hardware PHY, a difference set of setting is | |
310 | * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps), | |
311 | * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will | |
312 | * report disparity error and etc. In addition, during COMRESET, there can | |
313 | * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and | |
0babe614 ST |
314 | * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long |
315 | * reboot cycle regression, sometimes the PHY reports link down even if the | |
316 | * device is present because of speed negotiation failure. so need to retry | |
317 | * the COMRESET to get the link up. The following algorithm is followed to | |
318 | * proper configure the hardware PHY during COMRESET: | |
81d01bfa LH |
319 | * |
320 | * Alg Part 1: | |
321 | * 1. Start the PHY at Gen3 speed (default setting) | |
322 | * 2. Issue the COMRESET | |
323 | * 3. If no link, go to Alg Part 3 | |
324 | * 4. If link up, determine if the negotiated speed matches the PHY | |
325 | * configured speed | |
326 | * 5. If they matched, go to Alg Part 2 | |
327 | * 6. If they do not matched and first time, configure the PHY for the linked | |
328 | * up disk speed and repeat step 2 | |
329 | * 7. Go to Alg Part 2 | |
330 | * | |
331 | * Alg Part 2: | |
332 | * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error | |
333 | * reported in the register PORT_SCR_ERR, then reset the PHY receiver line | |
0babe614 | 334 | * 2. Go to Alg Part 4 |
81d01bfa LH |
335 | * |
336 | * Alg Part 3: | |
0babe614 ST |
337 | * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY |
338 | * communication establishment failed and maximum link down attempts are | |
339 | * less than Max attempts 3 then goto Alg Part 1. | |
340 | * 2. Go to Alg Part 4. | |
341 | * | |
342 | * Alg Part 4: | |
81d01bfa LH |
343 | * 1. Clear any pending from register PORT_SCR_ERR. |
344 | * | |
345 | * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition | |
346 | * and until the underlying PHY supports an method to reset the receiver | |
347 | * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors, | |
348 | * an warning message will be printed. | |
349 | */ | |
350 | static int xgene_ahci_do_hardreset(struct ata_link *link, | |
351 | unsigned long deadline, bool *online) | |
352 | { | |
353 | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); | |
354 | struct ata_port *ap = link->ap; | |
355 | struct ahci_host_priv *hpriv = ap->host->private_data; | |
356 | struct xgene_ahci_context *ctx = hpriv->plat_data; | |
357 | struct ahci_port_priv *pp = ap->private_data; | |
358 | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | |
359 | void __iomem *port_mmio = ahci_port_base(ap); | |
360 | struct ata_taskfile tf; | |
0babe614 | 361 | int link_down_retry = 0; |
81d01bfa | 362 | int rc; |
0babe614 | 363 | u32 val, sstatus; |
81d01bfa | 364 | |
0babe614 ST |
365 | do { |
366 | /* clear D2H reception area to properly wait for D2H FIS */ | |
367 | ata_tf_init(link->device, &tf); | |
368 | tf.command = ATA_BUSY; | |
369 | ata_tf_to_fis(&tf, 0, 0, d2h_fis); | |
370 | rc = sata_link_hardreset(link, timing, deadline, online, | |
81d01bfa | 371 | ahci_check_ready); |
0babe614 ST |
372 | if (*online) { |
373 | val = readl(port_mmio + PORT_SCR_ERR); | |
374 | if (val & (SERR_DISPARITY | SERR_10B_8B_ERR)) | |
375 | dev_warn(ctx->dev, "link has error\n"); | |
376 | break; | |
377 | } | |
81d01bfa | 378 | |
0babe614 ST |
379 | sata_scr_read(link, SCR_STATUS, &sstatus); |
380 | } while (link_down_retry++ < MAX_LINK_DOWN_RETRY && | |
381 | (sstatus & 0xff) == 0x1); | |
81d01bfa LH |
382 | |
383 | /* clear all errors if any pending */ | |
384 | val = readl(port_mmio + PORT_SCR_ERR); | |
385 | writel(val, port_mmio + PORT_SCR_ERR); | |
386 | ||
387 | return rc; | |
388 | } | |
389 | ||
390 | static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, | |
391 | unsigned long deadline) | |
392 | { | |
393 | struct ata_port *ap = link->ap; | |
394 | struct ahci_host_priv *hpriv = ap->host->private_data; | |
395 | void __iomem *port_mmio = ahci_port_base(ap); | |
396 | bool online; | |
397 | int rc; | |
398 | u32 portcmd_saved; | |
399 | u32 portclb_saved; | |
400 | u32 portclbhi_saved; | |
401 | u32 portrxfis_saved; | |
402 | u32 portrxfishi_saved; | |
403 | ||
404 | /* As hardreset resets these CSR, save it to restore later */ | |
405 | portcmd_saved = readl(port_mmio + PORT_CMD); | |
406 | portclb_saved = readl(port_mmio + PORT_LST_ADDR); | |
407 | portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); | |
408 | portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); | |
409 | portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); | |
410 | ||
fa89f53b | 411 | hpriv->stop_engine(ap); |
81d01bfa LH |
412 | |
413 | rc = xgene_ahci_do_hardreset(link, deadline, &online); | |
414 | ||
415 | /* As controller hardreset clears them, restore them */ | |
416 | writel(portcmd_saved, port_mmio + PORT_CMD); | |
417 | writel(portclb_saved, port_mmio + PORT_LST_ADDR); | |
418 | writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); | |
419 | writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); | |
420 | writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); | |
421 | ||
422 | hpriv->start_engine(ap); | |
423 | ||
424 | if (online) | |
425 | *class = ahci_dev_classify(ap); | |
426 | ||
427 | return rc; | |
428 | } | |
429 | ||
430 | static void xgene_ahci_host_stop(struct ata_host *host) | |
431 | { | |
432 | struct ahci_host_priv *hpriv = host->private_data; | |
433 | ||
434 | ahci_platform_disable_resources(hpriv); | |
435 | } | |
436 | ||
a3a84bc7 ST |
437 | /** |
438 | * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected | |
439 | * to Port Multiplier. | |
440 | * @link: link to reset | |
441 | * @class: Return value to indicate class of device | |
442 | * @deadline: deadline jiffies for the operation | |
443 | * | |
444 | * Due to H/W errata, the controller is unable to save the PMP | |
445 | * field fetched from command header before sending the H2D FIS. | |
446 | * When the device returns the PMP port field in the D2H FIS, there is | |
447 | * a mismatch and results in command completion failure. The workaround | |
448 | * is to write the pmp value to PxFBS.DEV field before issuing any command | |
449 | * to PMP. | |
450 | */ | |
451 | static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class, | |
452 | unsigned long deadline) | |
453 | { | |
454 | int pmp = sata_srst_pmp(link); | |
455 | struct ata_port *ap = link->ap; | |
456 | u32 rc; | |
457 | void *port_mmio = ahci_port_base(ap); | |
458 | u32 port_fbs; | |
459 | ||
460 | /* | |
461 | * Set PxFBS.DEV field with pmp | |
462 | * value. | |
463 | */ | |
464 | port_fbs = readl(port_mmio + PORT_FBS); | |
465 | port_fbs &= ~PORT_FBS_DEV_MASK; | |
466 | port_fbs |= pmp << PORT_FBS_DEV_OFFSET; | |
467 | writel(port_fbs, port_mmio + PORT_FBS); | |
468 | ||
469 | rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); | |
470 | ||
471 | return rc; | |
472 | } | |
473 | ||
474 | /** | |
475 | * xgene_ahci_softreset - Issue the softreset to the drive. | |
476 | * @link: link to reset | |
477 | * @class: Return value to indicate class of device | |
478 | * @deadline: deadline jiffies for the operation | |
479 | * | |
480 | * Due to H/W errata, the controller is unable to save the PMP | |
481 | * field fetched from command header before sending the H2D FIS. | |
482 | * When the device returns the PMP port field in the D2H FIS, there is | |
483 | * a mismatch and results in command completion failure. The workaround | |
484 | * is to write the pmp value to PxFBS.DEV field before issuing any command | |
485 | * to PMP. Here is the algorithm to detect PMP : | |
486 | * | |
487 | * 1. Save the PxFBS value | |
488 | * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends | |
489 | * 0xF for both PMP/NON-PMP initially | |
490 | * 3. Issue softreset | |
491 | * 4. If signature class is PMP goto 6 | |
492 | * 5. restore the original PxFBS and goto 3 | |
493 | * 6. return | |
494 | */ | |
495 | static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, | |
496 | unsigned long deadline) | |
497 | { | |
498 | int pmp = sata_srst_pmp(link); | |
499 | struct ata_port *ap = link->ap; | |
500 | struct ahci_host_priv *hpriv = ap->host->private_data; | |
501 | struct xgene_ahci_context *ctx = hpriv->plat_data; | |
502 | void *port_mmio = ahci_port_base(ap); | |
503 | u32 port_fbs; | |
504 | u32 port_fbs_save; | |
505 | u32 retry = 1; | |
506 | u32 rc; | |
507 | ||
508 | port_fbs_save = readl(port_mmio + PORT_FBS); | |
509 | ||
510 | /* | |
511 | * Set PxFBS.DEV field with pmp | |
512 | * value. | |
513 | */ | |
514 | port_fbs = readl(port_mmio + PORT_FBS); | |
515 | port_fbs &= ~PORT_FBS_DEV_MASK; | |
516 | port_fbs |= pmp << PORT_FBS_DEV_OFFSET; | |
517 | writel(port_fbs, port_mmio + PORT_FBS); | |
518 | ||
519 | softreset_retry: | |
520 | rc = ahci_do_softreset(link, class, pmp, | |
521 | deadline, ahci_check_ready); | |
522 | ||
523 | ctx->class[ap->port_no] = *class; | |
524 | if (*class != ATA_DEV_PMP) { | |
525 | /* | |
526 | * Retry for normal drives without | |
527 | * setting PxFBS.DEV field with pmp value. | |
528 | */ | |
529 | if (retry--) { | |
530 | writel(port_fbs_save, port_mmio + PORT_FBS); | |
531 | goto softreset_retry; | |
532 | } | |
533 | } | |
534 | ||
535 | return rc; | |
536 | } | |
537 | ||
32aea268 ST |
538 | /** |
539 | * xgene_ahci_handle_broken_edge_irq - Handle the broken irq. | |
540 | * @ata_host: Host that recieved the irq | |
541 | * @irq_masked: HOST_IRQ_STAT value | |
542 | * | |
543 | * For hardware with broken edge trigger latch | |
544 | * the HOST_IRQ_STAT register misses the edge interrupt | |
545 | * when clearing of HOST_IRQ_STAT register and hardware | |
546 | * reporting the PORT_IRQ_STAT register at the | |
547 | * same clock cycle. | |
548 | * As such, the algorithm below outlines the workaround. | |
549 | * | |
550 | * 1. Read HOST_IRQ_STAT register and save the state. | |
551 | * 2. Clear the HOST_IRQ_STAT register. | |
552 | * 3. Read back the HOST_IRQ_STAT register. | |
553 | * 4. If HOST_IRQ_STAT register equals to zero, then | |
554 | * traverse the rest of port's PORT_IRQ_STAT register | |
555 | * to check if an interrupt is triggered at that point else | |
556 | * go to step 6. | |
557 | * 5. If PORT_IRQ_STAT register of rest ports is not equal to zero | |
558 | * then update the state of HOST_IRQ_STAT saved in step 1. | |
559 | * 6. Handle port interrupts. | |
560 | * 7. Exit | |
561 | */ | |
562 | static int xgene_ahci_handle_broken_edge_irq(struct ata_host *host, | |
563 | u32 irq_masked) | |
564 | { | |
565 | struct ahci_host_priv *hpriv = host->private_data; | |
566 | void __iomem *port_mmio; | |
567 | int i; | |
568 | ||
569 | if (!readl(hpriv->mmio + HOST_IRQ_STAT)) { | |
570 | for (i = 0; i < host->n_ports; i++) { | |
571 | if (irq_masked & (1 << i)) | |
572 | continue; | |
573 | ||
574 | port_mmio = ahci_port_base(host->ports[i]); | |
575 | if (readl(port_mmio + PORT_IRQ_STAT)) | |
576 | irq_masked |= (1 << i); | |
577 | } | |
578 | } | |
579 | ||
580 | return ahci_handle_port_intr(host, irq_masked); | |
581 | } | |
582 | ||
d867b95f ST |
583 | static irqreturn_t xgene_ahci_irq_intr(int irq, void *dev_instance) |
584 | { | |
585 | struct ata_host *host = dev_instance; | |
586 | struct ahci_host_priv *hpriv; | |
587 | unsigned int rc = 0; | |
588 | void __iomem *mmio; | |
589 | u32 irq_stat, irq_masked; | |
590 | ||
591 | VPRINTK("ENTER\n"); | |
592 | ||
593 | hpriv = host->private_data; | |
594 | mmio = hpriv->mmio; | |
595 | ||
596 | /* sigh. 0xffffffff is a valid return from h/w */ | |
597 | irq_stat = readl(mmio + HOST_IRQ_STAT); | |
598 | if (!irq_stat) | |
599 | return IRQ_NONE; | |
600 | ||
601 | irq_masked = irq_stat & hpriv->port_map; | |
602 | ||
603 | spin_lock(&host->lock); | |
604 | ||
605 | /* | |
606 | * HOST_IRQ_STAT behaves as edge triggered latch meaning that | |
607 | * it should be cleared before all the port events are cleared. | |
608 | */ | |
609 | writel(irq_stat, mmio + HOST_IRQ_STAT); | |
610 | ||
32aea268 | 611 | rc = xgene_ahci_handle_broken_edge_irq(host, irq_masked); |
d867b95f ST |
612 | |
613 | spin_unlock(&host->lock); | |
614 | ||
615 | VPRINTK("EXIT\n"); | |
616 | ||
617 | return IRQ_RETVAL(rc); | |
618 | } | |
619 | ||
c9802a4b | 620 | static struct ata_port_operations xgene_ahci_v1_ops = { |
81d01bfa LH |
621 | .inherits = &ahci_ops, |
622 | .host_stop = xgene_ahci_host_stop, | |
623 | .hardreset = xgene_ahci_hardreset, | |
624 | .read_id = xgene_ahci_read_id, | |
2a0bdff6 | 625 | .qc_issue = xgene_ahci_qc_issue, |
a3a84bc7 ST |
626 | .softreset = xgene_ahci_softreset, |
627 | .pmp_softreset = xgene_ahci_pmp_softreset | |
81d01bfa LH |
628 | }; |
629 | ||
c9802a4b | 630 | static const struct ata_port_info xgene_ahci_v1_port_info = { |
1540035d | 631 | .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, |
81d01bfa LH |
632 | .pio_mask = ATA_PIO4, |
633 | .udma_mask = ATA_UDMA6, | |
c9802a4b ST |
634 | .port_ops = &xgene_ahci_v1_ops, |
635 | }; | |
636 | ||
637 | static struct ata_port_operations xgene_ahci_v2_ops = { | |
638 | .inherits = &ahci_ops, | |
639 | .host_stop = xgene_ahci_host_stop, | |
640 | .hardreset = xgene_ahci_hardreset, | |
641 | .read_id = xgene_ahci_read_id, | |
642 | }; | |
643 | ||
644 | static const struct ata_port_info xgene_ahci_v2_port_info = { | |
645 | .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, | |
646 | .pio_mask = ATA_PIO4, | |
647 | .udma_mask = ATA_UDMA6, | |
648 | .port_ops = &xgene_ahci_v2_ops, | |
81d01bfa LH |
649 | }; |
650 | ||
651 | static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) | |
652 | { | |
653 | struct xgene_ahci_context *ctx = hpriv->plat_data; | |
654 | int i; | |
655 | int rc; | |
656 | u32 val; | |
657 | ||
658 | /* Remove IP RAM out of shutdown */ | |
659 | rc = xgene_ahci_init_memram(ctx); | |
660 | if (rc) | |
661 | return rc; | |
662 | ||
663 | for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) | |
664 | xgene_ahci_set_phy_cfg(ctx, i); | |
665 | ||
666 | /* AXI disable Mask */ | |
667 | writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT); | |
668 | readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */ | |
669 | writel(0, ctx->csr_core + INTSTATUSMASK); | |
6a96918a | 670 | val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */ |
81d01bfa LH |
671 | dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n", |
672 | INTSTATUSMASK, val); | |
673 | ||
674 | writel(0x0, ctx->csr_core + ERRINTSTATUSMASK); | |
675 | readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */ | |
676 | writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK); | |
677 | readl(ctx->csr_axi + INT_SLV_TMOMASK); | |
678 | ||
679 | /* Enable AXI Interrupt */ | |
680 | writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES); | |
681 | writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES); | |
682 | writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES); | |
683 | writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES); | |
684 | ||
685 | /* Enable coherency */ | |
686 | val = readl(ctx->csr_core + BUSCTLREG); | |
687 | val &= ~0x00000002; /* Enable write coherency */ | |
688 | val &= ~0x00000001; /* Enable read coherency */ | |
689 | writel(val, ctx->csr_core + BUSCTLREG); | |
690 | ||
691 | val = readl(ctx->csr_core + IOFMSTRWAUX); | |
692 | val |= (1 << 3); /* Enable read coherency */ | |
693 | val |= (1 << 9); /* Enable write coherency */ | |
694 | writel(val, ctx->csr_core + IOFMSTRWAUX); | |
695 | val = readl(ctx->csr_core + IOFMSTRWAUX); | |
696 | dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n", | |
697 | IOFMSTRWAUX, val); | |
698 | ||
699 | return rc; | |
700 | } | |
701 | ||
702 | static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) | |
703 | { | |
704 | u32 val; | |
705 | ||
706 | /* Check for optional MUX resource */ | |
a77b6ee9 | 707 | if (!ctx->csr_mux) |
81d01bfa LH |
708 | return 0; |
709 | ||
710 | val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); | |
711 | val &= ~CFG_SATA_ENET_SELECT_MASK; | |
712 | writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG); | |
713 | val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); | |
714 | return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; | |
715 | } | |
716 | ||
018d5ef2 AM |
717 | static struct scsi_host_template ahci_platform_sht = { |
718 | AHCI_SHT(DRV_NAME), | |
719 | }; | |
720 | ||
c9802a4b ST |
721 | #ifdef CONFIG_ACPI |
722 | static const struct acpi_device_id xgene_ahci_acpi_match[] = { | |
723 | { "APMC0D0D", XGENE_AHCI_V1}, | |
724 | { "APMC0D32", XGENE_AHCI_V2}, | |
725 | {}, | |
726 | }; | |
727 | MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); | |
728 | #endif | |
729 | ||
730 | static const struct of_device_id xgene_ahci_of_match[] = { | |
731 | {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, | |
732 | {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, | |
733 | {}, | |
734 | }; | |
735 | MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); | |
736 | ||
81d01bfa LH |
737 | static int xgene_ahci_probe(struct platform_device *pdev) |
738 | { | |
739 | struct device *dev = &pdev->dev; | |
740 | struct ahci_host_priv *hpriv; | |
741 | struct xgene_ahci_context *ctx; | |
742 | struct resource *res; | |
c9802a4b ST |
743 | const struct of_device_id *of_devid; |
744 | enum xgene_ahci_version version = XGENE_AHCI_V1; | |
745 | const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, | |
746 | &xgene_ahci_v2_port_info }; | |
81d01bfa LH |
747 | int rc; |
748 | ||
16af2d65 | 749 | hpriv = ahci_platform_get_resources(pdev, 0); |
81d01bfa LH |
750 | if (IS_ERR(hpriv)) |
751 | return PTR_ERR(hpriv); | |
752 | ||
753 | ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); | |
754 | if (!ctx) | |
755 | return -ENOMEM; | |
756 | ||
757 | hpriv->plat_data = ctx; | |
758 | ctx->hpriv = hpriv; | |
759 | ctx->dev = dev; | |
760 | ||
761 | /* Retrieve the IP core resource */ | |
762 | res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
763 | ctx->csr_core = devm_ioremap_resource(dev, res); | |
764 | if (IS_ERR(ctx->csr_core)) | |
765 | return PTR_ERR(ctx->csr_core); | |
766 | ||
767 | /* Retrieve the IP diagnostic resource */ | |
768 | res = platform_get_resource(pdev, IORESOURCE_MEM, 2); | |
769 | ctx->csr_diag = devm_ioremap_resource(dev, res); | |
770 | if (IS_ERR(ctx->csr_diag)) | |
771 | return PTR_ERR(ctx->csr_diag); | |
772 | ||
773 | /* Retrieve the IP AXI resource */ | |
774 | res = platform_get_resource(pdev, IORESOURCE_MEM, 3); | |
775 | ctx->csr_axi = devm_ioremap_resource(dev, res); | |
776 | if (IS_ERR(ctx->csr_axi)) | |
777 | return PTR_ERR(ctx->csr_axi); | |
778 | ||
779 | /* Retrieve the optional IP mux resource */ | |
780 | res = platform_get_resource(pdev, IORESOURCE_MEM, 4); | |
a77b6ee9 ST |
781 | if (res) { |
782 | void __iomem *csr = devm_ioremap_resource(dev, res); | |
783 | if (IS_ERR(csr)) | |
784 | return PTR_ERR(csr); | |
785 | ||
786 | ctx->csr_mux = csr; | |
787 | } | |
81d01bfa | 788 | |
c9802a4b ST |
789 | of_devid = of_match_device(xgene_ahci_of_match, dev); |
790 | if (of_devid) { | |
791 | if (of_devid->data) | |
792 | version = (enum xgene_ahci_version) of_devid->data; | |
793 | } | |
794 | #ifdef CONFIG_ACPI | |
795 | else { | |
796 | const struct acpi_device_id *acpi_id; | |
797 | struct acpi_device_info *info; | |
798 | acpi_status status; | |
799 | ||
800 | acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev); | |
801 | if (!acpi_id) { | |
802 | dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n"); | |
803 | version = XGENE_AHCI_V1; | |
2d32d101 | 804 | } else if (acpi_id->driver_data) { |
c9802a4b ST |
805 | version = (enum xgene_ahci_version) acpi_id->driver_data; |
806 | status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info); | |
807 | if (ACPI_FAILURE(status)) { | |
808 | dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", | |
809 | __func__); | |
810 | version = XGENE_AHCI_V1; | |
de251820 MK |
811 | } else { |
812 | if (info->valid & ACPI_VALID_CID) | |
813 | version = XGENE_AHCI_V2; | |
814 | kfree(info); | |
8134233e | 815 | } |
c9802a4b ST |
816 | } |
817 | } | |
818 | #endif | |
819 | ||
81d01bfa LH |
820 | dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, |
821 | hpriv->mmio); | |
822 | ||
823 | /* Select ATA */ | |
824 | if ((rc = xgene_ahci_mux_select(ctx))) { | |
825 | dev_err(dev, "SATA mux selection failed error %d\n", rc); | |
826 | return -ENODEV; | |
827 | } | |
828 | ||
0bed13be ST |
829 | if (xgene_ahci_is_memram_inited(ctx)) { |
830 | dev_info(dev, "skip clock and PHY initialization\n"); | |
831 | goto skip_clk_phy; | |
832 | } | |
833 | ||
81d01bfa LH |
834 | /* Due to errata, HW requires full toggle transition */ |
835 | rc = ahci_platform_enable_clks(hpriv); | |
836 | if (rc) | |
837 | goto disable_resources; | |
838 | ahci_platform_disable_clks(hpriv); | |
839 | ||
840 | rc = ahci_platform_enable_resources(hpriv); | |
841 | if (rc) | |
842 | goto disable_resources; | |
843 | ||
844 | /* Configure the host controller */ | |
845 | xgene_ahci_hw_init(hpriv); | |
0bed13be | 846 | skip_clk_phy: |
f9f36917 | 847 | |
c9802a4b ST |
848 | switch (version) { |
849 | case XGENE_AHCI_V1: | |
850 | hpriv->flags = AHCI_HFLAG_NO_NCQ; | |
851 | break; | |
852 | case XGENE_AHCI_V2: | |
d867b95f ST |
853 | hpriv->flags |= AHCI_HFLAG_YES_FBS; |
854 | hpriv->irq_handler = xgene_ahci_irq_intr; | |
c9802a4b ST |
855 | break; |
856 | default: | |
857 | break; | |
858 | } | |
859 | ||
860 | rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], | |
018d5ef2 | 861 | &ahci_platform_sht); |
81d01bfa LH |
862 | if (rc) |
863 | goto disable_resources; | |
864 | ||
865 | dev_dbg(dev, "X-Gene SATA host controller initialized\n"); | |
866 | return 0; | |
867 | ||
868 | disable_resources: | |
869 | ahci_platform_disable_resources(hpriv); | |
870 | return rc; | |
871 | } | |
872 | ||
81d01bfa LH |
873 | static struct platform_driver xgene_ahci_driver = { |
874 | .probe = xgene_ahci_probe, | |
875 | .remove = ata_platform_remove_one, | |
876 | .driver = { | |
018d5ef2 | 877 | .name = DRV_NAME, |
81d01bfa | 878 | .of_match_table = xgene_ahci_of_match, |
92b5bf98 | 879 | .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match), |
81d01bfa LH |
880 | }, |
881 | }; | |
882 | ||
883 | module_platform_driver(xgene_ahci_driver); | |
884 | ||
885 | MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); | |
886 | MODULE_AUTHOR("Loc Ho <lho@apm.com>"); | |
887 | MODULE_LICENSE("GPL"); | |
888 | MODULE_VERSION("0.4"); |