]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
af36d7f0 JG |
2 | * libata-core.c - helper library for ATA |
3 | * | |
4 | * Maintained by: Jeff Garzik <jgarzik@pobox.com> | |
5 | * Please ALWAYS copy linux-ide@vger.kernel.org | |
6 | * on emails. | |
7 | * | |
8 | * Copyright 2003-2004 Red Hat, Inc. All rights reserved. | |
9 | * Copyright 2003-2004 Jeff Garzik | |
10 | * | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2, or (at your option) | |
15 | * any later version. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * You should have received a copy of the GNU General Public License | |
23 | * along with this program; see the file COPYING. If not, write to | |
24 | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
25 | * | |
26 | * | |
27 | * libata documentation is available via 'make {ps|pdf}docs', | |
28 | * as Documentation/DocBook/libata.* | |
29 | * | |
30 | * Hardware documentation available from http://www.t13.org/ and | |
31 | * http://www.sata-io.org/ | |
32 | * | |
92c52c52 AC |
33 | * Standards documents from: |
34 | * http://www.t13.org (ATA standards, PCI DMA IDE spec) | |
35 | * http://www.t10.org (SCSI MMC - for ATAPI MMC) | |
36 | * http://www.sata-io.org (SATA) | |
37 | * http://www.compactflash.org (CF) | |
38 | * http://www.qic.org (QIC157 - Tape and DSC) | |
39 | * http://www.ce-ata.org (CE-ATA: not supported) | |
40 | * | |
1da177e4 LT |
41 | */ |
42 | ||
1da177e4 LT |
43 | #include <linux/kernel.h> |
44 | #include <linux/module.h> | |
45 | #include <linux/pci.h> | |
46 | #include <linux/init.h> | |
47 | #include <linux/list.h> | |
48 | #include <linux/mm.h> | |
1da177e4 LT |
49 | #include <linux/spinlock.h> |
50 | #include <linux/blkdev.h> | |
51 | #include <linux/delay.h> | |
52 | #include <linux/timer.h> | |
53 | #include <linux/interrupt.h> | |
54 | #include <linux/completion.h> | |
55 | #include <linux/suspend.h> | |
56 | #include <linux/workqueue.h> | |
378f058c | 57 | #include <linux/scatterlist.h> |
2dcb407e | 58 | #include <linux/io.h> |
79318057 | 59 | #include <linux/async.h> |
e18086d6 | 60 | #include <linux/log2.h> |
1da177e4 | 61 | #include <scsi/scsi.h> |
193515d5 | 62 | #include <scsi/scsi_cmnd.h> |
1da177e4 LT |
63 | #include <scsi/scsi_host.h> |
64 | #include <linux/libata.h> | |
1da177e4 | 65 | #include <asm/byteorder.h> |
140b5e59 | 66 | #include <linux/cdrom.h> |
1da177e4 LT |
67 | |
68 | #include "libata.h" | |
69 | ||
fda0efc5 | 70 | |
d7bb4cc7 | 71 | /* debounce timing parameters in msecs { interval, duration, timeout } */ |
e9c83914 TH |
72 | const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; |
73 | const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; | |
74 | const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; | |
d7bb4cc7 | 75 | |
029cfd6b | 76 | const struct ata_port_operations ata_base_port_ops = { |
0aa1113d | 77 | .prereset = ata_std_prereset, |
203c75b8 | 78 | .postreset = ata_std_postreset, |
a1efdaba | 79 | .error_handler = ata_std_error_handler, |
029cfd6b TH |
80 | }; |
81 | ||
82 | const struct ata_port_operations sata_port_ops = { | |
83 | .inherits = &ata_base_port_ops, | |
84 | ||
85 | .qc_defer = ata_std_qc_defer, | |
57c9efdf | 86 | .hardreset = sata_std_hardreset, |
029cfd6b TH |
87 | }; |
88 | ||
3373efd8 TH |
89 | static unsigned int ata_dev_init_params(struct ata_device *dev, |
90 | u16 heads, u16 sectors); | |
91 | static unsigned int ata_dev_set_xfermode(struct ata_device *dev); | |
218f3d30 JG |
92 | static unsigned int ata_dev_set_feature(struct ata_device *dev, |
93 | u8 enable, u8 feature); | |
3373efd8 | 94 | static void ata_dev_xfermask(struct ata_device *dev); |
75683fe7 | 95 | static unsigned long ata_dev_blacklisted(const struct ata_device *dev); |
1da177e4 | 96 | |
f3187195 | 97 | unsigned int ata_print_id = 1; |
1da177e4 LT |
98 | static struct workqueue_struct *ata_wq; |
99 | ||
453b07ac TH |
100 | struct workqueue_struct *ata_aux_wq; |
101 | ||
33267325 TH |
102 | struct ata_force_param { |
103 | const char *name; | |
104 | unsigned int cbl; | |
105 | int spd_limit; | |
106 | unsigned long xfer_mask; | |
107 | unsigned int horkage_on; | |
108 | unsigned int horkage_off; | |
05944bdf | 109 | unsigned int lflags; |
33267325 TH |
110 | }; |
111 | ||
112 | struct ata_force_ent { | |
113 | int port; | |
114 | int device; | |
115 | struct ata_force_param param; | |
116 | }; | |
117 | ||
118 | static struct ata_force_ent *ata_force_tbl; | |
119 | static int ata_force_tbl_size; | |
120 | ||
121 | static char ata_force_param_buf[PAGE_SIZE] __initdata; | |
7afb4222 TH |
122 | /* param_buf is thrown away after initialization, disallow read */ |
123 | module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0); | |
33267325 TH |
124 | MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)"); |
125 | ||
2486fa56 | 126 | static int atapi_enabled = 1; |
1623c81e | 127 | module_param(atapi_enabled, int, 0444); |
ad5d8eac | 128 | MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])"); |
1623c81e | 129 | |
c5c61bda | 130 | static int atapi_dmadir = 0; |
95de719a | 131 | module_param(atapi_dmadir, int, 0444); |
ad5d8eac | 132 | MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)"); |
95de719a | 133 | |
baf4fdfa ML |
134 | int atapi_passthru16 = 1; |
135 | module_param(atapi_passthru16, int, 0444); | |
ad5d8eac | 136 | MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])"); |
baf4fdfa | 137 | |
c3c013a2 JG |
138 | int libata_fua = 0; |
139 | module_param_named(fua, libata_fua, int, 0444); | |
ad5d8eac | 140 | MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)"); |
c3c013a2 | 141 | |
2dcb407e | 142 | static int ata_ignore_hpa; |
1e999736 AC |
143 | module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); |
144 | MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); | |
145 | ||
b3a70601 AC |
146 | static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA; |
147 | module_param_named(dma, libata_dma_mask, int, 0444); | |
148 | MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); | |
149 | ||
87fbc5a0 | 150 | static int ata_probe_timeout; |
a8601e5f AM |
151 | module_param(ata_probe_timeout, int, 0444); |
152 | MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); | |
153 | ||
6ebe9d86 | 154 | int libata_noacpi = 0; |
d7d0dad6 | 155 | module_param_named(noacpi, libata_noacpi, int, 0444); |
ad5d8eac | 156 | MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)"); |
11ef697b | 157 | |
ae8d4ee7 AC |
158 | int libata_allow_tpm = 0; |
159 | module_param_named(allow_tpm, libata_allow_tpm, int, 0444); | |
ad5d8eac | 160 | MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)"); |
ae8d4ee7 | 161 | |
1da177e4 LT |
162 | MODULE_AUTHOR("Jeff Garzik"); |
163 | MODULE_DESCRIPTION("Library module for ATA devices"); | |
164 | MODULE_LICENSE("GPL"); | |
165 | MODULE_VERSION(DRV_VERSION); | |
166 | ||
0baab86b | 167 | |
9913ff8a TH |
168 | static bool ata_sstatus_online(u32 sstatus) |
169 | { | |
170 | return (sstatus & 0xf) == 0x3; | |
171 | } | |
172 | ||
1eca4365 TH |
173 | /** |
174 | * ata_link_next - link iteration helper | |
175 | * @link: the previous link, NULL to start | |
176 | * @ap: ATA port containing links to iterate | |
177 | * @mode: iteration mode, one of ATA_LITER_* | |
178 | * | |
179 | * LOCKING: | |
180 | * Host lock or EH context. | |
aadffb68 | 181 | * |
1eca4365 TH |
182 | * RETURNS: |
183 | * Pointer to the next link. | |
aadffb68 | 184 | */ |
1eca4365 TH |
185 | struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap, |
186 | enum ata_link_iter_mode mode) | |
aadffb68 | 187 | { |
1eca4365 TH |
188 | BUG_ON(mode != ATA_LITER_EDGE && |
189 | mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST); | |
190 | ||
aadffb68 | 191 | /* NULL link indicates start of iteration */ |
1eca4365 TH |
192 | if (!link) |
193 | switch (mode) { | |
194 | case ATA_LITER_EDGE: | |
195 | case ATA_LITER_PMP_FIRST: | |
196 | if (sata_pmp_attached(ap)) | |
197 | return ap->pmp_link; | |
198 | /* fall through */ | |
199 | case ATA_LITER_HOST_FIRST: | |
200 | return &ap->link; | |
201 | } | |
aadffb68 | 202 | |
1eca4365 TH |
203 | /* we just iterated over the host link, what's next? */ |
204 | if (link == &ap->link) | |
205 | switch (mode) { | |
206 | case ATA_LITER_HOST_FIRST: | |
207 | if (sata_pmp_attached(ap)) | |
208 | return ap->pmp_link; | |
209 | /* fall through */ | |
210 | case ATA_LITER_PMP_FIRST: | |
211 | if (unlikely(ap->slave_link)) | |
b1c72916 | 212 | return ap->slave_link; |
1eca4365 TH |
213 | /* fall through */ |
214 | case ATA_LITER_EDGE: | |
aadffb68 | 215 | return NULL; |
b1c72916 | 216 | } |
aadffb68 | 217 | |
b1c72916 TH |
218 | /* slave_link excludes PMP */ |
219 | if (unlikely(link == ap->slave_link)) | |
220 | return NULL; | |
221 | ||
1eca4365 | 222 | /* we were over a PMP link */ |
aadffb68 TH |
223 | if (++link < ap->pmp_link + ap->nr_pmp_links) |
224 | return link; | |
1eca4365 TH |
225 | |
226 | if (mode == ATA_LITER_PMP_FIRST) | |
227 | return &ap->link; | |
228 | ||
aadffb68 TH |
229 | return NULL; |
230 | } | |
231 | ||
1eca4365 TH |
232 | /** |
233 | * ata_dev_next - device iteration helper | |
234 | * @dev: the previous device, NULL to start | |
235 | * @link: ATA link containing devices to iterate | |
236 | * @mode: iteration mode, one of ATA_DITER_* | |
237 | * | |
238 | * LOCKING: | |
239 | * Host lock or EH context. | |
240 | * | |
241 | * RETURNS: | |
242 | * Pointer to the next device. | |
243 | */ | |
244 | struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link, | |
245 | enum ata_dev_iter_mode mode) | |
246 | { | |
247 | BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE && | |
248 | mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE); | |
249 | ||
250 | /* NULL dev indicates start of iteration */ | |
251 | if (!dev) | |
252 | switch (mode) { | |
253 | case ATA_DITER_ENABLED: | |
254 | case ATA_DITER_ALL: | |
255 | dev = link->device; | |
256 | goto check; | |
257 | case ATA_DITER_ENABLED_REVERSE: | |
258 | case ATA_DITER_ALL_REVERSE: | |
259 | dev = link->device + ata_link_max_devices(link) - 1; | |
260 | goto check; | |
261 | } | |
262 | ||
263 | next: | |
264 | /* move to the next one */ | |
265 | switch (mode) { | |
266 | case ATA_DITER_ENABLED: | |
267 | case ATA_DITER_ALL: | |
268 | if (++dev < link->device + ata_link_max_devices(link)) | |
269 | goto check; | |
270 | return NULL; | |
271 | case ATA_DITER_ENABLED_REVERSE: | |
272 | case ATA_DITER_ALL_REVERSE: | |
273 | if (--dev >= link->device) | |
274 | goto check; | |
275 | return NULL; | |
276 | } | |
277 | ||
278 | check: | |
279 | if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) && | |
280 | !ata_dev_enabled(dev)) | |
281 | goto next; | |
282 | return dev; | |
283 | } | |
284 | ||
b1c72916 TH |
285 | /** |
286 | * ata_dev_phys_link - find physical link for a device | |
287 | * @dev: ATA device to look up physical link for | |
288 | * | |
289 | * Look up physical link which @dev is attached to. Note that | |
290 | * this is different from @dev->link only when @dev is on slave | |
291 | * link. For all other cases, it's the same as @dev->link. | |
292 | * | |
293 | * LOCKING: | |
294 | * Don't care. | |
295 | * | |
296 | * RETURNS: | |
297 | * Pointer to the found physical link. | |
298 | */ | |
299 | struct ata_link *ata_dev_phys_link(struct ata_device *dev) | |
300 | { | |
301 | struct ata_port *ap = dev->link->ap; | |
302 | ||
303 | if (!ap->slave_link) | |
304 | return dev->link; | |
305 | if (!dev->devno) | |
306 | return &ap->link; | |
307 | return ap->slave_link; | |
308 | } | |
309 | ||
33267325 TH |
310 | /** |
311 | * ata_force_cbl - force cable type according to libata.force | |
4cdfa1b3 | 312 | * @ap: ATA port of interest |
33267325 TH |
313 | * |
314 | * Force cable type according to libata.force and whine about it. | |
315 | * The last entry which has matching port number is used, so it | |
316 | * can be specified as part of device force parameters. For | |
317 | * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the | |
318 | * same effect. | |
319 | * | |
320 | * LOCKING: | |
321 | * EH context. | |
322 | */ | |
323 | void ata_force_cbl(struct ata_port *ap) | |
324 | { | |
325 | int i; | |
326 | ||
327 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
328 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
329 | ||
330 | if (fe->port != -1 && fe->port != ap->print_id) | |
331 | continue; | |
332 | ||
333 | if (fe->param.cbl == ATA_CBL_NONE) | |
334 | continue; | |
335 | ||
336 | ap->cbl = fe->param.cbl; | |
337 | ata_port_printk(ap, KERN_NOTICE, | |
338 | "FORCE: cable set to %s\n", fe->param.name); | |
339 | return; | |
340 | } | |
341 | } | |
342 | ||
343 | /** | |
05944bdf | 344 | * ata_force_link_limits - force link limits according to libata.force |
33267325 TH |
345 | * @link: ATA link of interest |
346 | * | |
05944bdf TH |
347 | * Force link flags and SATA spd limit according to libata.force |
348 | * and whine about it. When only the port part is specified | |
349 | * (e.g. 1:), the limit applies to all links connected to both | |
350 | * the host link and all fan-out ports connected via PMP. If the | |
351 | * device part is specified as 0 (e.g. 1.00:), it specifies the | |
352 | * first fan-out link not the host link. Device number 15 always | |
b1c72916 TH |
353 | * points to the host link whether PMP is attached or not. If the |
354 | * controller has slave link, device number 16 points to it. | |
33267325 TH |
355 | * |
356 | * LOCKING: | |
357 | * EH context. | |
358 | */ | |
05944bdf | 359 | static void ata_force_link_limits(struct ata_link *link) |
33267325 | 360 | { |
05944bdf | 361 | bool did_spd = false; |
b1c72916 TH |
362 | int linkno = link->pmp; |
363 | int i; | |
33267325 TH |
364 | |
365 | if (ata_is_host_link(link)) | |
b1c72916 | 366 | linkno += 15; |
33267325 TH |
367 | |
368 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
369 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
370 | ||
371 | if (fe->port != -1 && fe->port != link->ap->print_id) | |
372 | continue; | |
373 | ||
374 | if (fe->device != -1 && fe->device != linkno) | |
375 | continue; | |
376 | ||
05944bdf TH |
377 | /* only honor the first spd limit */ |
378 | if (!did_spd && fe->param.spd_limit) { | |
379 | link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1; | |
380 | ata_link_printk(link, KERN_NOTICE, | |
381 | "FORCE: PHY spd limit set to %s\n", | |
382 | fe->param.name); | |
383 | did_spd = true; | |
384 | } | |
33267325 | 385 | |
05944bdf TH |
386 | /* let lflags stack */ |
387 | if (fe->param.lflags) { | |
388 | link->flags |= fe->param.lflags; | |
389 | ata_link_printk(link, KERN_NOTICE, | |
390 | "FORCE: link flag 0x%x forced -> 0x%x\n", | |
391 | fe->param.lflags, link->flags); | |
392 | } | |
33267325 TH |
393 | } |
394 | } | |
395 | ||
396 | /** | |
397 | * ata_force_xfermask - force xfermask according to libata.force | |
398 | * @dev: ATA device of interest | |
399 | * | |
400 | * Force xfer_mask according to libata.force and whine about it. | |
401 | * For consistency with link selection, device number 15 selects | |
402 | * the first device connected to the host link. | |
403 | * | |
404 | * LOCKING: | |
405 | * EH context. | |
406 | */ | |
407 | static void ata_force_xfermask(struct ata_device *dev) | |
408 | { | |
409 | int devno = dev->link->pmp + dev->devno; | |
410 | int alt_devno = devno; | |
411 | int i; | |
412 | ||
b1c72916 TH |
413 | /* allow n.15/16 for devices attached to host port */ |
414 | if (ata_is_host_link(dev->link)) | |
415 | alt_devno += 15; | |
33267325 TH |
416 | |
417 | for (i = ata_force_tbl_size - 1; i >= 0; i--) { | |
418 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
419 | unsigned long pio_mask, mwdma_mask, udma_mask; | |
420 | ||
421 | if (fe->port != -1 && fe->port != dev->link->ap->print_id) | |
422 | continue; | |
423 | ||
424 | if (fe->device != -1 && fe->device != devno && | |
425 | fe->device != alt_devno) | |
426 | continue; | |
427 | ||
428 | if (!fe->param.xfer_mask) | |
429 | continue; | |
430 | ||
431 | ata_unpack_xfermask(fe->param.xfer_mask, | |
432 | &pio_mask, &mwdma_mask, &udma_mask); | |
433 | if (udma_mask) | |
434 | dev->udma_mask = udma_mask; | |
435 | else if (mwdma_mask) { | |
436 | dev->udma_mask = 0; | |
437 | dev->mwdma_mask = mwdma_mask; | |
438 | } else { | |
439 | dev->udma_mask = 0; | |
440 | dev->mwdma_mask = 0; | |
441 | dev->pio_mask = pio_mask; | |
442 | } | |
443 | ||
444 | ata_dev_printk(dev, KERN_NOTICE, | |
445 | "FORCE: xfer_mask set to %s\n", fe->param.name); | |
446 | return; | |
447 | } | |
448 | } | |
449 | ||
450 | /** | |
451 | * ata_force_horkage - force horkage according to libata.force | |
452 | * @dev: ATA device of interest | |
453 | * | |
454 | * Force horkage according to libata.force and whine about it. | |
455 | * For consistency with link selection, device number 15 selects | |
456 | * the first device connected to the host link. | |
457 | * | |
458 | * LOCKING: | |
459 | * EH context. | |
460 | */ | |
461 | static void ata_force_horkage(struct ata_device *dev) | |
462 | { | |
463 | int devno = dev->link->pmp + dev->devno; | |
464 | int alt_devno = devno; | |
465 | int i; | |
466 | ||
b1c72916 TH |
467 | /* allow n.15/16 for devices attached to host port */ |
468 | if (ata_is_host_link(dev->link)) | |
469 | alt_devno += 15; | |
33267325 TH |
470 | |
471 | for (i = 0; i < ata_force_tbl_size; i++) { | |
472 | const struct ata_force_ent *fe = &ata_force_tbl[i]; | |
473 | ||
474 | if (fe->port != -1 && fe->port != dev->link->ap->print_id) | |
475 | continue; | |
476 | ||
477 | if (fe->device != -1 && fe->device != devno && | |
478 | fe->device != alt_devno) | |
479 | continue; | |
480 | ||
481 | if (!(~dev->horkage & fe->param.horkage_on) && | |
482 | !(dev->horkage & fe->param.horkage_off)) | |
483 | continue; | |
484 | ||
485 | dev->horkage |= fe->param.horkage_on; | |
486 | dev->horkage &= ~fe->param.horkage_off; | |
487 | ||
488 | ata_dev_printk(dev, KERN_NOTICE, | |
489 | "FORCE: horkage modified (%s)\n", fe->param.name); | |
490 | } | |
491 | } | |
492 | ||
436d34b3 TH |
493 | /** |
494 | * atapi_cmd_type - Determine ATAPI command type from SCSI opcode | |
495 | * @opcode: SCSI opcode | |
496 | * | |
497 | * Determine ATAPI command type from @opcode. | |
498 | * | |
499 | * LOCKING: | |
500 | * None. | |
501 | * | |
502 | * RETURNS: | |
503 | * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC} | |
504 | */ | |
505 | int atapi_cmd_type(u8 opcode) | |
506 | { | |
507 | switch (opcode) { | |
508 | case GPCMD_READ_10: | |
509 | case GPCMD_READ_12: | |
510 | return ATAPI_READ; | |
511 | ||
512 | case GPCMD_WRITE_10: | |
513 | case GPCMD_WRITE_12: | |
514 | case GPCMD_WRITE_AND_VERIFY_10: | |
515 | return ATAPI_WRITE; | |
516 | ||
517 | case GPCMD_READ_CD: | |
518 | case GPCMD_READ_CD_MSF: | |
519 | return ATAPI_READ_CD; | |
520 | ||
e52dcc48 TH |
521 | case ATA_16: |
522 | case ATA_12: | |
523 | if (atapi_passthru16) | |
524 | return ATAPI_PASS_THRU; | |
525 | /* fall thru */ | |
436d34b3 TH |
526 | default: |
527 | return ATAPI_MISC; | |
528 | } | |
529 | } | |
530 | ||
1da177e4 LT |
531 | /** |
532 | * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure | |
533 | * @tf: Taskfile to convert | |
1da177e4 | 534 | * @pmp: Port multiplier port |
9977126c TH |
535 | * @is_cmd: This FIS is for command |
536 | * @fis: Buffer into which data will output | |
1da177e4 LT |
537 | * |
538 | * Converts a standard ATA taskfile to a Serial ATA | |
539 | * FIS structure (Register - Host to Device). | |
540 | * | |
541 | * LOCKING: | |
542 | * Inherited from caller. | |
543 | */ | |
9977126c | 544 | void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis) |
1da177e4 | 545 | { |
9977126c TH |
546 | fis[0] = 0x27; /* Register - Host to Device FIS */ |
547 | fis[1] = pmp & 0xf; /* Port multiplier number*/ | |
548 | if (is_cmd) | |
549 | fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */ | |
550 | ||
1da177e4 LT |
551 | fis[2] = tf->command; |
552 | fis[3] = tf->feature; | |
553 | ||
554 | fis[4] = tf->lbal; | |
555 | fis[5] = tf->lbam; | |
556 | fis[6] = tf->lbah; | |
557 | fis[7] = tf->device; | |
558 | ||
559 | fis[8] = tf->hob_lbal; | |
560 | fis[9] = tf->hob_lbam; | |
561 | fis[10] = tf->hob_lbah; | |
562 | fis[11] = tf->hob_feature; | |
563 | ||
564 | fis[12] = tf->nsect; | |
565 | fis[13] = tf->hob_nsect; | |
566 | fis[14] = 0; | |
567 | fis[15] = tf->ctl; | |
568 | ||
569 | fis[16] = 0; | |
570 | fis[17] = 0; | |
571 | fis[18] = 0; | |
572 | fis[19] = 0; | |
573 | } | |
574 | ||
575 | /** | |
576 | * ata_tf_from_fis - Convert SATA FIS to ATA taskfile | |
577 | * @fis: Buffer from which data will be input | |
578 | * @tf: Taskfile to output | |
579 | * | |
e12a1be6 | 580 | * Converts a serial ATA FIS structure to a standard ATA taskfile. |
1da177e4 LT |
581 | * |
582 | * LOCKING: | |
583 | * Inherited from caller. | |
584 | */ | |
585 | ||
057ace5e | 586 | void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) |
1da177e4 LT |
587 | { |
588 | tf->command = fis[2]; /* status */ | |
589 | tf->feature = fis[3]; /* error */ | |
590 | ||
591 | tf->lbal = fis[4]; | |
592 | tf->lbam = fis[5]; | |
593 | tf->lbah = fis[6]; | |
594 | tf->device = fis[7]; | |
595 | ||
596 | tf->hob_lbal = fis[8]; | |
597 | tf->hob_lbam = fis[9]; | |
598 | tf->hob_lbah = fis[10]; | |
599 | ||
600 | tf->nsect = fis[12]; | |
601 | tf->hob_nsect = fis[13]; | |
602 | } | |
603 | ||
8cbd6df1 AL |
604 | static const u8 ata_rw_cmds[] = { |
605 | /* pio multi */ | |
606 | ATA_CMD_READ_MULTI, | |
607 | ATA_CMD_WRITE_MULTI, | |
608 | ATA_CMD_READ_MULTI_EXT, | |
609 | ATA_CMD_WRITE_MULTI_EXT, | |
9a3dccc4 TH |
610 | 0, |
611 | 0, | |
612 | 0, | |
613 | ATA_CMD_WRITE_MULTI_FUA_EXT, | |
8cbd6df1 AL |
614 | /* pio */ |
615 | ATA_CMD_PIO_READ, | |
616 | ATA_CMD_PIO_WRITE, | |
617 | ATA_CMD_PIO_READ_EXT, | |
618 | ATA_CMD_PIO_WRITE_EXT, | |
9a3dccc4 TH |
619 | 0, |
620 | 0, | |
621 | 0, | |
622 | 0, | |
8cbd6df1 AL |
623 | /* dma */ |
624 | ATA_CMD_READ, | |
625 | ATA_CMD_WRITE, | |
626 | ATA_CMD_READ_EXT, | |
9a3dccc4 TH |
627 | ATA_CMD_WRITE_EXT, |
628 | 0, | |
629 | 0, | |
630 | 0, | |
631 | ATA_CMD_WRITE_FUA_EXT | |
8cbd6df1 | 632 | }; |
1da177e4 LT |
633 | |
634 | /** | |
8cbd6df1 | 635 | * ata_rwcmd_protocol - set taskfile r/w commands and protocol |
bd056d7e TH |
636 | * @tf: command to examine and configure |
637 | * @dev: device tf belongs to | |
1da177e4 | 638 | * |
2e9edbf8 | 639 | * Examine the device configuration and tf->flags to calculate |
8cbd6df1 | 640 | * the proper read/write commands and protocol to use. |
1da177e4 LT |
641 | * |
642 | * LOCKING: | |
643 | * caller. | |
644 | */ | |
bd056d7e | 645 | static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev) |
1da177e4 | 646 | { |
9a3dccc4 | 647 | u8 cmd; |
1da177e4 | 648 | |
9a3dccc4 | 649 | int index, fua, lba48, write; |
2e9edbf8 | 650 | |
9a3dccc4 | 651 | fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; |
8cbd6df1 AL |
652 | lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; |
653 | write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; | |
1da177e4 | 654 | |
8cbd6df1 AL |
655 | if (dev->flags & ATA_DFLAG_PIO) { |
656 | tf->protocol = ATA_PROT_PIO; | |
9a3dccc4 | 657 | index = dev->multi_count ? 0 : 8; |
9af5c9c9 | 658 | } else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) { |
8d238e01 AC |
659 | /* Unable to use DMA due to host limitation */ |
660 | tf->protocol = ATA_PROT_PIO; | |
0565c26d | 661 | index = dev->multi_count ? 0 : 8; |
8cbd6df1 AL |
662 | } else { |
663 | tf->protocol = ATA_PROT_DMA; | |
9a3dccc4 | 664 | index = 16; |
8cbd6df1 | 665 | } |
1da177e4 | 666 | |
9a3dccc4 TH |
667 | cmd = ata_rw_cmds[index + fua + lba48 + write]; |
668 | if (cmd) { | |
669 | tf->command = cmd; | |
670 | return 0; | |
671 | } | |
672 | return -1; | |
1da177e4 LT |
673 | } |
674 | ||
35b649fe TH |
675 | /** |
676 | * ata_tf_read_block - Read block address from ATA taskfile | |
677 | * @tf: ATA taskfile of interest | |
678 | * @dev: ATA device @tf belongs to | |
679 | * | |
680 | * LOCKING: | |
681 | * None. | |
682 | * | |
683 | * Read block address from @tf. This function can handle all | |
684 | * three address formats - LBA, LBA48 and CHS. tf->protocol and | |
685 | * flags select the address format to use. | |
686 | * | |
687 | * RETURNS: | |
688 | * Block address read from @tf. | |
689 | */ | |
690 | u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) | |
691 | { | |
692 | u64 block = 0; | |
693 | ||
694 | if (tf->flags & ATA_TFLAG_LBA) { | |
695 | if (tf->flags & ATA_TFLAG_LBA48) { | |
696 | block |= (u64)tf->hob_lbah << 40; | |
697 | block |= (u64)tf->hob_lbam << 32; | |
44901a96 | 698 | block |= (u64)tf->hob_lbal << 24; |
35b649fe TH |
699 | } else |
700 | block |= (tf->device & 0xf) << 24; | |
701 | ||
702 | block |= tf->lbah << 16; | |
703 | block |= tf->lbam << 8; | |
704 | block |= tf->lbal; | |
705 | } else { | |
706 | u32 cyl, head, sect; | |
707 | ||
708 | cyl = tf->lbam | (tf->lbah << 8); | |
709 | head = tf->device & 0xf; | |
710 | sect = tf->lbal; | |
711 | ||
712 | block = (cyl * dev->heads + head) * dev->sectors + sect; | |
713 | } | |
714 | ||
715 | return block; | |
716 | } | |
717 | ||
bd056d7e TH |
718 | /** |
719 | * ata_build_rw_tf - Build ATA taskfile for given read/write request | |
720 | * @tf: Target ATA taskfile | |
721 | * @dev: ATA device @tf belongs to | |
722 | * @block: Block address | |
723 | * @n_block: Number of blocks | |
724 | * @tf_flags: RW/FUA etc... | |
725 | * @tag: tag | |
726 | * | |
727 | * LOCKING: | |
728 | * None. | |
729 | * | |
730 | * Build ATA taskfile @tf for read/write request described by | |
731 | * @block, @n_block, @tf_flags and @tag on @dev. | |
732 | * | |
733 | * RETURNS: | |
734 | * | |
735 | * 0 on success, -ERANGE if the request is too large for @dev, | |
736 | * -EINVAL if the request is invalid. | |
737 | */ | |
738 | int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, | |
739 | u64 block, u32 n_block, unsigned int tf_flags, | |
740 | unsigned int tag) | |
741 | { | |
742 | tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
743 | tf->flags |= tf_flags; | |
744 | ||
6d1245bf | 745 | if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) { |
bd056d7e TH |
746 | /* yay, NCQ */ |
747 | if (!lba_48_ok(block, n_block)) | |
748 | return -ERANGE; | |
749 | ||
750 | tf->protocol = ATA_PROT_NCQ; | |
751 | tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; | |
752 | ||
753 | if (tf->flags & ATA_TFLAG_WRITE) | |
754 | tf->command = ATA_CMD_FPDMA_WRITE; | |
755 | else | |
756 | tf->command = ATA_CMD_FPDMA_READ; | |
757 | ||
758 | tf->nsect = tag << 3; | |
759 | tf->hob_feature = (n_block >> 8) & 0xff; | |
760 | tf->feature = n_block & 0xff; | |
761 | ||
762 | tf->hob_lbah = (block >> 40) & 0xff; | |
763 | tf->hob_lbam = (block >> 32) & 0xff; | |
764 | tf->hob_lbal = (block >> 24) & 0xff; | |
765 | tf->lbah = (block >> 16) & 0xff; | |
766 | tf->lbam = (block >> 8) & 0xff; | |
767 | tf->lbal = block & 0xff; | |
768 | ||
769 | tf->device = 1 << 6; | |
770 | if (tf->flags & ATA_TFLAG_FUA) | |
771 | tf->device |= 1 << 7; | |
772 | } else if (dev->flags & ATA_DFLAG_LBA) { | |
773 | tf->flags |= ATA_TFLAG_LBA; | |
774 | ||
775 | if (lba_28_ok(block, n_block)) { | |
776 | /* use LBA28 */ | |
777 | tf->device |= (block >> 24) & 0xf; | |
778 | } else if (lba_48_ok(block, n_block)) { | |
779 | if (!(dev->flags & ATA_DFLAG_LBA48)) | |
780 | return -ERANGE; | |
781 | ||
782 | /* use LBA48 */ | |
783 | tf->flags |= ATA_TFLAG_LBA48; | |
784 | ||
785 | tf->hob_nsect = (n_block >> 8) & 0xff; | |
786 | ||
787 | tf->hob_lbah = (block >> 40) & 0xff; | |
788 | tf->hob_lbam = (block >> 32) & 0xff; | |
789 | tf->hob_lbal = (block >> 24) & 0xff; | |
790 | } else | |
791 | /* request too large even for LBA48 */ | |
792 | return -ERANGE; | |
793 | ||
794 | if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) | |
795 | return -EINVAL; | |
796 | ||
797 | tf->nsect = n_block & 0xff; | |
798 | ||
799 | tf->lbah = (block >> 16) & 0xff; | |
800 | tf->lbam = (block >> 8) & 0xff; | |
801 | tf->lbal = block & 0xff; | |
802 | ||
803 | tf->device |= ATA_LBA; | |
804 | } else { | |
805 | /* CHS */ | |
806 | u32 sect, head, cyl, track; | |
807 | ||
808 | /* The request -may- be too large for CHS addressing. */ | |
809 | if (!lba_28_ok(block, n_block)) | |
810 | return -ERANGE; | |
811 | ||
812 | if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) | |
813 | return -EINVAL; | |
814 | ||
815 | /* Convert LBA to CHS */ | |
816 | track = (u32)block / dev->sectors; | |
817 | cyl = track / dev->heads; | |
818 | head = track % dev->heads; | |
819 | sect = (u32)block % dev->sectors + 1; | |
820 | ||
821 | DPRINTK("block %u track %u cyl %u head %u sect %u\n", | |
822 | (u32)block, track, cyl, head, sect); | |
823 | ||
824 | /* Check whether the converted CHS can fit. | |
825 | Cylinder: 0-65535 | |
826 | Head: 0-15 | |
827 | Sector: 1-255*/ | |
828 | if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) | |
829 | return -ERANGE; | |
830 | ||
831 | tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ | |
832 | tf->lbal = sect; | |
833 | tf->lbam = cyl; | |
834 | tf->lbah = cyl >> 8; | |
835 | tf->device |= head; | |
836 | } | |
837 | ||
838 | return 0; | |
839 | } | |
840 | ||
cb95d562 TH |
841 | /** |
842 | * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask | |
843 | * @pio_mask: pio_mask | |
844 | * @mwdma_mask: mwdma_mask | |
845 | * @udma_mask: udma_mask | |
846 | * | |
847 | * Pack @pio_mask, @mwdma_mask and @udma_mask into a single | |
848 | * unsigned int xfer_mask. | |
849 | * | |
850 | * LOCKING: | |
851 | * None. | |
852 | * | |
853 | * RETURNS: | |
854 | * Packed xfer_mask. | |
855 | */ | |
7dc951ae TH |
856 | unsigned long ata_pack_xfermask(unsigned long pio_mask, |
857 | unsigned long mwdma_mask, | |
858 | unsigned long udma_mask) | |
cb95d562 TH |
859 | { |
860 | return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | | |
861 | ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | | |
862 | ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); | |
863 | } | |
864 | ||
c0489e4e TH |
865 | /** |
866 | * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks | |
867 | * @xfer_mask: xfer_mask to unpack | |
868 | * @pio_mask: resulting pio_mask | |
869 | * @mwdma_mask: resulting mwdma_mask | |
870 | * @udma_mask: resulting udma_mask | |
871 | * | |
872 | * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. | |
873 | * Any NULL distination masks will be ignored. | |
874 | */ | |
7dc951ae TH |
875 | void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, |
876 | unsigned long *mwdma_mask, unsigned long *udma_mask) | |
c0489e4e TH |
877 | { |
878 | if (pio_mask) | |
879 | *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; | |
880 | if (mwdma_mask) | |
881 | *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; | |
882 | if (udma_mask) | |
883 | *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; | |
884 | } | |
885 | ||
cb95d562 | 886 | static const struct ata_xfer_ent { |
be9a50c8 | 887 | int shift, bits; |
cb95d562 TH |
888 | u8 base; |
889 | } ata_xfer_tbl[] = { | |
70cd071e TH |
890 | { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 }, |
891 | { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 }, | |
892 | { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 }, | |
cb95d562 TH |
893 | { -1, }, |
894 | }; | |
895 | ||
896 | /** | |
897 | * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask | |
898 | * @xfer_mask: xfer_mask of interest | |
899 | * | |
900 | * Return matching XFER_* value for @xfer_mask. Only the highest | |
901 | * bit of @xfer_mask is considered. | |
902 | * | |
903 | * LOCKING: | |
904 | * None. | |
905 | * | |
906 | * RETURNS: | |
70cd071e | 907 | * Matching XFER_* value, 0xff if no match found. |
cb95d562 | 908 | */ |
7dc951ae | 909 | u8 ata_xfer_mask2mode(unsigned long xfer_mask) |
cb95d562 TH |
910 | { |
911 | int highbit = fls(xfer_mask) - 1; | |
912 | const struct ata_xfer_ent *ent; | |
913 | ||
914 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
915 | if (highbit >= ent->shift && highbit < ent->shift + ent->bits) | |
916 | return ent->base + highbit - ent->shift; | |
70cd071e | 917 | return 0xff; |
cb95d562 TH |
918 | } |
919 | ||
920 | /** | |
921 | * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* | |
922 | * @xfer_mode: XFER_* of interest | |
923 | * | |
924 | * Return matching xfer_mask for @xfer_mode. | |
925 | * | |
926 | * LOCKING: | |
927 | * None. | |
928 | * | |
929 | * RETURNS: | |
930 | * Matching xfer_mask, 0 if no match found. | |
931 | */ | |
7dc951ae | 932 | unsigned long ata_xfer_mode2mask(u8 xfer_mode) |
cb95d562 TH |
933 | { |
934 | const struct ata_xfer_ent *ent; | |
935 | ||
936 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
937 | if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) | |
70cd071e TH |
938 | return ((2 << (ent->shift + xfer_mode - ent->base)) - 1) |
939 | & ~((1 << ent->shift) - 1); | |
cb95d562 TH |
940 | return 0; |
941 | } | |
942 | ||
943 | /** | |
944 | * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* | |
945 | * @xfer_mode: XFER_* of interest | |
946 | * | |
947 | * Return matching xfer_shift for @xfer_mode. | |
948 | * | |
949 | * LOCKING: | |
950 | * None. | |
951 | * | |
952 | * RETURNS: | |
953 | * Matching xfer_shift, -1 if no match found. | |
954 | */ | |
7dc951ae | 955 | int ata_xfer_mode2shift(unsigned long xfer_mode) |
cb95d562 TH |
956 | { |
957 | const struct ata_xfer_ent *ent; | |
958 | ||
959 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
960 | if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) | |
961 | return ent->shift; | |
962 | return -1; | |
963 | } | |
964 | ||
1da177e4 | 965 | /** |
1da7b0d0 TH |
966 | * ata_mode_string - convert xfer_mask to string |
967 | * @xfer_mask: mask of bits supported; only highest bit counts. | |
1da177e4 LT |
968 | * |
969 | * Determine string which represents the highest speed | |
1da7b0d0 | 970 | * (highest bit in @modemask). |
1da177e4 LT |
971 | * |
972 | * LOCKING: | |
973 | * None. | |
974 | * | |
975 | * RETURNS: | |
976 | * Constant C string representing highest speed listed in | |
1da7b0d0 | 977 | * @mode_mask, or the constant C string "<n/a>". |
1da177e4 | 978 | */ |
7dc951ae | 979 | const char *ata_mode_string(unsigned long xfer_mask) |
1da177e4 | 980 | { |
75f554bc TH |
981 | static const char * const xfer_mode_str[] = { |
982 | "PIO0", | |
983 | "PIO1", | |
984 | "PIO2", | |
985 | "PIO3", | |
986 | "PIO4", | |
b352e57d AC |
987 | "PIO5", |
988 | "PIO6", | |
75f554bc TH |
989 | "MWDMA0", |
990 | "MWDMA1", | |
991 | "MWDMA2", | |
b352e57d AC |
992 | "MWDMA3", |
993 | "MWDMA4", | |
75f554bc TH |
994 | "UDMA/16", |
995 | "UDMA/25", | |
996 | "UDMA/33", | |
997 | "UDMA/44", | |
998 | "UDMA/66", | |
999 | "UDMA/100", | |
1000 | "UDMA/133", | |
1001 | "UDMA7", | |
1002 | }; | |
1da7b0d0 | 1003 | int highbit; |
1da177e4 | 1004 | |
1da7b0d0 TH |
1005 | highbit = fls(xfer_mask) - 1; |
1006 | if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) | |
1007 | return xfer_mode_str[highbit]; | |
1da177e4 | 1008 | return "<n/a>"; |
1da177e4 LT |
1009 | } |
1010 | ||
4c360c81 TH |
1011 | static const char *sata_spd_string(unsigned int spd) |
1012 | { | |
1013 | static const char * const spd_str[] = { | |
1014 | "1.5 Gbps", | |
1015 | "3.0 Gbps", | |
8522ee25 | 1016 | "6.0 Gbps", |
4c360c81 TH |
1017 | }; |
1018 | ||
1019 | if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) | |
1020 | return "<unknown>"; | |
1021 | return spd_str[spd - 1]; | |
1022 | } | |
1023 | ||
ca77329f KCA |
1024 | static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) |
1025 | { | |
1026 | struct ata_link *link = dev->link; | |
1027 | struct ata_port *ap = link->ap; | |
1028 | u32 scontrol; | |
1029 | unsigned int err_mask; | |
1030 | int rc; | |
1031 | ||
1032 | /* | |
1033 | * disallow DIPM for drivers which haven't set | |
1034 | * ATA_FLAG_IPM. This is because when DIPM is enabled, | |
1035 | * phy ready will be set in the interrupt status on | |
1036 | * state changes, which will cause some drivers to | |
1037 | * think there are errors - additionally drivers will | |
1038 | * need to disable hot plug. | |
1039 | */ | |
1040 | if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) { | |
1041 | ap->pm_policy = NOT_AVAILABLE; | |
1042 | return -EINVAL; | |
1043 | } | |
1044 | ||
1045 | /* | |
1046 | * For DIPM, we will only enable it for the | |
1047 | * min_power setting. | |
1048 | * | |
1049 | * Why? Because Disks are too stupid to know that | |
1050 | * If the host rejects a request to go to SLUMBER | |
1051 | * they should retry at PARTIAL, and instead it | |
1052 | * just would give up. So, for medium_power to | |
1053 | * work at all, we need to only allow HIPM. | |
1054 | */ | |
1055 | rc = sata_scr_read(link, SCR_CONTROL, &scontrol); | |
1056 | if (rc) | |
1057 | return rc; | |
1058 | ||
1059 | switch (policy) { | |
1060 | case MIN_POWER: | |
1061 | /* no restrictions on IPM transitions */ | |
1062 | scontrol &= ~(0x3 << 8); | |
1063 | rc = sata_scr_write(link, SCR_CONTROL, scontrol); | |
1064 | if (rc) | |
1065 | return rc; | |
1066 | ||
1067 | /* enable DIPM */ | |
1068 | if (dev->flags & ATA_DFLAG_DIPM) | |
1069 | err_mask = ata_dev_set_feature(dev, | |
1070 | SETFEATURES_SATA_ENABLE, SATA_DIPM); | |
1071 | break; | |
1072 | case MEDIUM_POWER: | |
1073 | /* allow IPM to PARTIAL */ | |
1074 | scontrol &= ~(0x1 << 8); | |
1075 | scontrol |= (0x2 << 8); | |
1076 | rc = sata_scr_write(link, SCR_CONTROL, scontrol); | |
1077 | if (rc) | |
1078 | return rc; | |
1079 | ||
f5456b63 KCA |
1080 | /* |
1081 | * we don't have to disable DIPM since IPM flags | |
1082 | * disallow transitions to SLUMBER, which effectively | |
1083 | * disable DIPM if it does not support PARTIAL | |
1084 | */ | |
ca77329f KCA |
1085 | break; |
1086 | case NOT_AVAILABLE: | |
1087 | case MAX_PERFORMANCE: | |
1088 | /* disable all IPM transitions */ | |
1089 | scontrol |= (0x3 << 8); | |
1090 | rc = sata_scr_write(link, SCR_CONTROL, scontrol); | |
1091 | if (rc) | |
1092 | return rc; | |
1093 | ||
f5456b63 KCA |
1094 | /* |
1095 | * we don't have to disable DIPM since IPM flags | |
1096 | * disallow all transitions which effectively | |
1097 | * disable DIPM anyway. | |
1098 | */ | |
ca77329f KCA |
1099 | break; |
1100 | } | |
1101 | ||
1102 | /* FIXME: handle SET FEATURES failure */ | |
1103 | (void) err_mask; | |
1104 | ||
1105 | return 0; | |
1106 | } | |
1107 | ||
1108 | /** | |
1109 | * ata_dev_enable_pm - enable SATA interface power management | |
48166fd9 SH |
1110 | * @dev: device to enable power management |
1111 | * @policy: the link power management policy | |
ca77329f KCA |
1112 | * |
1113 | * Enable SATA Interface power management. This will enable | |
1114 | * Device Interface Power Management (DIPM) for min_power | |
1115 | * policy, and then call driver specific callbacks for | |
1116 | * enabling Host Initiated Power management. | |
1117 | * | |
1118 | * Locking: Caller. | |
1119 | * Returns: -EINVAL if IPM is not supported, 0 otherwise. | |
1120 | */ | |
1121 | void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy) | |
1122 | { | |
1123 | int rc = 0; | |
1124 | struct ata_port *ap = dev->link->ap; | |
1125 | ||
1126 | /* set HIPM first, then DIPM */ | |
1127 | if (ap->ops->enable_pm) | |
1128 | rc = ap->ops->enable_pm(ap, policy); | |
1129 | if (rc) | |
1130 | goto enable_pm_out; | |
1131 | rc = ata_dev_set_dipm(dev, policy); | |
1132 | ||
1133 | enable_pm_out: | |
1134 | if (rc) | |
1135 | ap->pm_policy = MAX_PERFORMANCE; | |
1136 | else | |
1137 | ap->pm_policy = policy; | |
1138 | return /* rc */; /* hopefully we can use 'rc' eventually */ | |
1139 | } | |
1140 | ||
1992a5ed | 1141 | #ifdef CONFIG_PM |
ca77329f KCA |
1142 | /** |
1143 | * ata_dev_disable_pm - disable SATA interface power management | |
48166fd9 | 1144 | * @dev: device to disable power management |
ca77329f KCA |
1145 | * |
1146 | * Disable SATA Interface power management. This will disable | |
1147 | * Device Interface Power Management (DIPM) without changing | |
1148 | * policy, call driver specific callbacks for disabling Host | |
1149 | * Initiated Power management. | |
1150 | * | |
1151 | * Locking: Caller. | |
1152 | * Returns: void | |
1153 | */ | |
1154 | static void ata_dev_disable_pm(struct ata_device *dev) | |
1155 | { | |
1156 | struct ata_port *ap = dev->link->ap; | |
1157 | ||
1158 | ata_dev_set_dipm(dev, MAX_PERFORMANCE); | |
1159 | if (ap->ops->disable_pm) | |
1160 | ap->ops->disable_pm(ap); | |
1161 | } | |
1992a5ed | 1162 | #endif /* CONFIG_PM */ |
ca77329f KCA |
1163 | |
1164 | void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) | |
1165 | { | |
1166 | ap->pm_policy = policy; | |
3ec25ebd | 1167 | ap->link.eh_info.action |= ATA_EH_LPM; |
ca77329f KCA |
1168 | ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY; |
1169 | ata_port_schedule_eh(ap); | |
1170 | } | |
1171 | ||
1992a5ed | 1172 | #ifdef CONFIG_PM |
ca77329f KCA |
1173 | static void ata_lpm_enable(struct ata_host *host) |
1174 | { | |
1175 | struct ata_link *link; | |
1176 | struct ata_port *ap; | |
1177 | struct ata_device *dev; | |
1178 | int i; | |
1179 | ||
1180 | for (i = 0; i < host->n_ports; i++) { | |
1181 | ap = host->ports[i]; | |
1eca4365 TH |
1182 | ata_for_each_link(link, ap, EDGE) { |
1183 | ata_for_each_dev(dev, link, ALL) | |
ca77329f KCA |
1184 | ata_dev_disable_pm(dev); |
1185 | } | |
1186 | } | |
1187 | } | |
1188 | ||
1189 | static void ata_lpm_disable(struct ata_host *host) | |
1190 | { | |
1191 | int i; | |
1192 | ||
1193 | for (i = 0; i < host->n_ports; i++) { | |
1194 | struct ata_port *ap = host->ports[i]; | |
1195 | ata_lpm_schedule(ap, ap->pm_policy); | |
1196 | } | |
1197 | } | |
1992a5ed | 1198 | #endif /* CONFIG_PM */ |
ca77329f | 1199 | |
1da177e4 LT |
1200 | /** |
1201 | * ata_dev_classify - determine device type based on ATA-spec signature | |
1202 | * @tf: ATA taskfile register set for device to be identified | |
1203 | * | |
1204 | * Determine from taskfile register contents whether a device is | |
1205 | * ATA or ATAPI, as per "Signature and persistence" section | |
1206 | * of ATA/PI spec (volume 1, sect 5.14). | |
1207 | * | |
1208 | * LOCKING: | |
1209 | * None. | |
1210 | * | |
1211 | * RETURNS: | |
633273a3 TH |
1212 | * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP or |
1213 | * %ATA_DEV_UNKNOWN the event of failure. | |
1da177e4 | 1214 | */ |
057ace5e | 1215 | unsigned int ata_dev_classify(const struct ata_taskfile *tf) |
1da177e4 LT |
1216 | { |
1217 | /* Apple's open source Darwin code hints that some devices only | |
1218 | * put a proper signature into the LBA mid/high registers, | |
1219 | * So, we only check those. It's sufficient for uniqueness. | |
633273a3 TH |
1220 | * |
1221 | * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate | |
1222 | * signatures for ATA and ATAPI devices attached on SerialATA, | |
1223 | * 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA | |
1224 | * spec has never mentioned about using different signatures | |
1225 | * for ATA/ATAPI devices. Then, Serial ATA II: Port | |
1226 | * Multiplier specification began to use 0x69/0x96 to identify | |
1227 | * port multpliers and 0x3c/0xc3 to identify SEMB device. | |
1228 | * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and | |
1229 | * 0x69/0x96 shortly and described them as reserved for | |
1230 | * SerialATA. | |
1231 | * | |
1232 | * We follow the current spec and consider that 0x69/0x96 | |
1233 | * identifies a port multiplier and 0x3c/0xc3 a SEMB device. | |
79b42bab TH |
1234 | * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports |
1235 | * SEMB signature. This is worked around in | |
1236 | * ata_dev_read_id(). | |
1da177e4 | 1237 | */ |
633273a3 | 1238 | if ((tf->lbam == 0) && (tf->lbah == 0)) { |
1da177e4 LT |
1239 | DPRINTK("found ATA device by sig\n"); |
1240 | return ATA_DEV_ATA; | |
1241 | } | |
1242 | ||
633273a3 | 1243 | if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) { |
1da177e4 LT |
1244 | DPRINTK("found ATAPI device by sig\n"); |
1245 | return ATA_DEV_ATAPI; | |
1246 | } | |
1247 | ||
633273a3 TH |
1248 | if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) { |
1249 | DPRINTK("found PMP device by sig\n"); | |
1250 | return ATA_DEV_PMP; | |
1251 | } | |
1252 | ||
1253 | if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { | |
79b42bab TH |
1254 | DPRINTK("found SEMB device by sig (could be ATA device)\n"); |
1255 | return ATA_DEV_SEMB; | |
633273a3 TH |
1256 | } |
1257 | ||
1da177e4 LT |
1258 | DPRINTK("unknown device\n"); |
1259 | return ATA_DEV_UNKNOWN; | |
1260 | } | |
1261 | ||
1da177e4 | 1262 | /** |
6a62a04d | 1263 | * ata_id_string - Convert IDENTIFY DEVICE page into string |
1da177e4 LT |
1264 | * @id: IDENTIFY DEVICE results we will examine |
1265 | * @s: string into which data is output | |
1266 | * @ofs: offset into identify device page | |
1267 | * @len: length of string to return. must be an even number. | |
1268 | * | |
1269 | * The strings in the IDENTIFY DEVICE page are broken up into | |
1270 | * 16-bit chunks. Run through the string, and output each | |
1271 | * 8-bit chunk linearly, regardless of platform. | |
1272 | * | |
1273 | * LOCKING: | |
1274 | * caller. | |
1275 | */ | |
1276 | ||
6a62a04d TH |
1277 | void ata_id_string(const u16 *id, unsigned char *s, |
1278 | unsigned int ofs, unsigned int len) | |
1da177e4 LT |
1279 | { |
1280 | unsigned int c; | |
1281 | ||
963e4975 AC |
1282 | BUG_ON(len & 1); |
1283 | ||
1da177e4 LT |
1284 | while (len > 0) { |
1285 | c = id[ofs] >> 8; | |
1286 | *s = c; | |
1287 | s++; | |
1288 | ||
1289 | c = id[ofs] & 0xff; | |
1290 | *s = c; | |
1291 | s++; | |
1292 | ||
1293 | ofs++; | |
1294 | len -= 2; | |
1295 | } | |
1296 | } | |
1297 | ||
0e949ff3 | 1298 | /** |
6a62a04d | 1299 | * ata_id_c_string - Convert IDENTIFY DEVICE page into C string |
0e949ff3 TH |
1300 | * @id: IDENTIFY DEVICE results we will examine |
1301 | * @s: string into which data is output | |
1302 | * @ofs: offset into identify device page | |
1303 | * @len: length of string to return. must be an odd number. | |
1304 | * | |
6a62a04d | 1305 | * This function is identical to ata_id_string except that it |
0e949ff3 TH |
1306 | * trims trailing spaces and terminates the resulting string with |
1307 | * null. @len must be actual maximum length (even number) + 1. | |
1308 | * | |
1309 | * LOCKING: | |
1310 | * caller. | |
1311 | */ | |
6a62a04d TH |
1312 | void ata_id_c_string(const u16 *id, unsigned char *s, |
1313 | unsigned int ofs, unsigned int len) | |
0e949ff3 TH |
1314 | { |
1315 | unsigned char *p; | |
1316 | ||
6a62a04d | 1317 | ata_id_string(id, s, ofs, len - 1); |
0e949ff3 TH |
1318 | |
1319 | p = s + strnlen(s, len - 1); | |
1320 | while (p > s && p[-1] == ' ') | |
1321 | p--; | |
1322 | *p = '\0'; | |
1323 | } | |
0baab86b | 1324 | |
db6f8759 TH |
1325 | static u64 ata_id_n_sectors(const u16 *id) |
1326 | { | |
1327 | if (ata_id_has_lba(id)) { | |
1328 | if (ata_id_has_lba48(id)) | |
968e594a | 1329 | return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); |
db6f8759 | 1330 | else |
968e594a | 1331 | return ata_id_u32(id, ATA_ID_LBA_CAPACITY); |
db6f8759 TH |
1332 | } else { |
1333 | if (ata_id_current_chs_valid(id)) | |
968e594a RH |
1334 | return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] * |
1335 | id[ATA_ID_CUR_SECTORS]; | |
db6f8759 | 1336 | else |
968e594a RH |
1337 | return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * |
1338 | id[ATA_ID_SECTORS]; | |
db6f8759 TH |
1339 | } |
1340 | } | |
1341 | ||
a5987e0a | 1342 | u64 ata_tf_to_lba48(const struct ata_taskfile *tf) |
1e999736 AC |
1343 | { |
1344 | u64 sectors = 0; | |
1345 | ||
1346 | sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; | |
1347 | sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; | |
ba14a9c2 | 1348 | sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24; |
1e999736 AC |
1349 | sectors |= (tf->lbah & 0xff) << 16; |
1350 | sectors |= (tf->lbam & 0xff) << 8; | |
1351 | sectors |= (tf->lbal & 0xff); | |
1352 | ||
a5987e0a | 1353 | return sectors; |
1e999736 AC |
1354 | } |
1355 | ||
a5987e0a | 1356 | u64 ata_tf_to_lba(const struct ata_taskfile *tf) |
1e999736 AC |
1357 | { |
1358 | u64 sectors = 0; | |
1359 | ||
1360 | sectors |= (tf->device & 0x0f) << 24; | |
1361 | sectors |= (tf->lbah & 0xff) << 16; | |
1362 | sectors |= (tf->lbam & 0xff) << 8; | |
1363 | sectors |= (tf->lbal & 0xff); | |
1364 | ||
a5987e0a | 1365 | return sectors; |
1e999736 AC |
1366 | } |
1367 | ||
1368 | /** | |
c728a914 TH |
1369 | * ata_read_native_max_address - Read native max address |
1370 | * @dev: target device | |
1371 | * @max_sectors: out parameter for the result native max address | |
1e999736 | 1372 | * |
c728a914 TH |
1373 | * Perform an LBA48 or LBA28 native size query upon the device in |
1374 | * question. | |
1e999736 | 1375 | * |
c728a914 TH |
1376 | * RETURNS: |
1377 | * 0 on success, -EACCES if command is aborted by the drive. | |
1378 | * -EIO on other errors. | |
1e999736 | 1379 | */ |
c728a914 | 1380 | static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) |
1e999736 | 1381 | { |
c728a914 | 1382 | unsigned int err_mask; |
1e999736 | 1383 | struct ata_taskfile tf; |
c728a914 | 1384 | int lba48 = ata_id_has_lba48(dev->id); |
1e999736 AC |
1385 | |
1386 | ata_tf_init(dev, &tf); | |
1387 | ||
c728a914 | 1388 | /* always clear all address registers */ |
1e999736 | 1389 | tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; |
1e999736 | 1390 | |
c728a914 TH |
1391 | if (lba48) { |
1392 | tf.command = ATA_CMD_READ_NATIVE_MAX_EXT; | |
1393 | tf.flags |= ATA_TFLAG_LBA48; | |
1394 | } else | |
1395 | tf.command = ATA_CMD_READ_NATIVE_MAX; | |
1e999736 | 1396 | |
1e999736 | 1397 | tf.protocol |= ATA_PROT_NODATA; |
c728a914 TH |
1398 | tf.device |= ATA_LBA; |
1399 | ||
2b789108 | 1400 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
c728a914 TH |
1401 | if (err_mask) { |
1402 | ata_dev_printk(dev, KERN_WARNING, "failed to read native " | |
1403 | "max address (err_mask=0x%x)\n", err_mask); | |
1404 | if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) | |
1405 | return -EACCES; | |
1406 | return -EIO; | |
1407 | } | |
1e999736 | 1408 | |
c728a914 | 1409 | if (lba48) |
a5987e0a | 1410 | *max_sectors = ata_tf_to_lba48(&tf) + 1; |
c728a914 | 1411 | else |
a5987e0a | 1412 | *max_sectors = ata_tf_to_lba(&tf) + 1; |
2dcb407e | 1413 | if (dev->horkage & ATA_HORKAGE_HPA_SIZE) |
93328e11 | 1414 | (*max_sectors)--; |
c728a914 | 1415 | return 0; |
1e999736 AC |
1416 | } |
1417 | ||
1418 | /** | |
c728a914 TH |
1419 | * ata_set_max_sectors - Set max sectors |
1420 | * @dev: target device | |
6b38d1d1 | 1421 | * @new_sectors: new max sectors value to set for the device |
1e999736 | 1422 | * |
c728a914 TH |
1423 | * Set max sectors of @dev to @new_sectors. |
1424 | * | |
1425 | * RETURNS: | |
1426 | * 0 on success, -EACCES if command is aborted or denied (due to | |
1427 | * previous non-volatile SET_MAX) by the drive. -EIO on other | |
1428 | * errors. | |
1e999736 | 1429 | */ |
05027adc | 1430 | static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors) |
1e999736 | 1431 | { |
c728a914 | 1432 | unsigned int err_mask; |
1e999736 | 1433 | struct ata_taskfile tf; |
c728a914 | 1434 | int lba48 = ata_id_has_lba48(dev->id); |
1e999736 AC |
1435 | |
1436 | new_sectors--; | |
1437 | ||
1438 | ata_tf_init(dev, &tf); | |
1439 | ||
1e999736 | 1440 | tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; |
c728a914 TH |
1441 | |
1442 | if (lba48) { | |
1443 | tf.command = ATA_CMD_SET_MAX_EXT; | |
1444 | tf.flags |= ATA_TFLAG_LBA48; | |
1445 | ||
1446 | tf.hob_lbal = (new_sectors >> 24) & 0xff; | |
1447 | tf.hob_lbam = (new_sectors >> 32) & 0xff; | |
1448 | tf.hob_lbah = (new_sectors >> 40) & 0xff; | |
1e582ba4 | 1449 | } else { |
c728a914 TH |
1450 | tf.command = ATA_CMD_SET_MAX; |
1451 | ||
1e582ba4 TH |
1452 | tf.device |= (new_sectors >> 24) & 0xf; |
1453 | } | |
1454 | ||
1e999736 | 1455 | tf.protocol |= ATA_PROT_NODATA; |
c728a914 | 1456 | tf.device |= ATA_LBA; |
1e999736 AC |
1457 | |
1458 | tf.lbal = (new_sectors >> 0) & 0xff; | |
1459 | tf.lbam = (new_sectors >> 8) & 0xff; | |
1460 | tf.lbah = (new_sectors >> 16) & 0xff; | |
1e999736 | 1461 | |
2b789108 | 1462 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
c728a914 TH |
1463 | if (err_mask) { |
1464 | ata_dev_printk(dev, KERN_WARNING, "failed to set " | |
1465 | "max address (err_mask=0x%x)\n", err_mask); | |
1466 | if (err_mask == AC_ERR_DEV && | |
1467 | (tf.feature & (ATA_ABORTED | ATA_IDNF))) | |
1468 | return -EACCES; | |
1469 | return -EIO; | |
1470 | } | |
1471 | ||
c728a914 | 1472 | return 0; |
1e999736 AC |
1473 | } |
1474 | ||
1475 | /** | |
1476 | * ata_hpa_resize - Resize a device with an HPA set | |
1477 | * @dev: Device to resize | |
1478 | * | |
1479 | * Read the size of an LBA28 or LBA48 disk with HPA features and resize | |
1480 | * it if required to the full size of the media. The caller must check | |
1481 | * the drive has the HPA feature set enabled. | |
05027adc TH |
1482 | * |
1483 | * RETURNS: | |
1484 | * 0 on success, -errno on failure. | |
1e999736 | 1485 | */ |
05027adc | 1486 | static int ata_hpa_resize(struct ata_device *dev) |
1e999736 | 1487 | { |
05027adc TH |
1488 | struct ata_eh_context *ehc = &dev->link->eh_context; |
1489 | int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; | |
1490 | u64 sectors = ata_id_n_sectors(dev->id); | |
1491 | u64 native_sectors; | |
c728a914 | 1492 | int rc; |
a617c09f | 1493 | |
05027adc TH |
1494 | /* do we need to do it? */ |
1495 | if (dev->class != ATA_DEV_ATA || | |
1496 | !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) || | |
1497 | (dev->horkage & ATA_HORKAGE_BROKEN_HPA)) | |
c728a914 | 1498 | return 0; |
1e999736 | 1499 | |
05027adc TH |
1500 | /* read native max address */ |
1501 | rc = ata_read_native_max_address(dev, &native_sectors); | |
1502 | if (rc) { | |
dda7aba1 TH |
1503 | /* If device aborted the command or HPA isn't going to |
1504 | * be unlocked, skip HPA resizing. | |
05027adc | 1505 | */ |
dda7aba1 | 1506 | if (rc == -EACCES || !ata_ignore_hpa) { |
05027adc | 1507 | ata_dev_printk(dev, KERN_WARNING, "HPA support seems " |
dda7aba1 | 1508 | "broken, skipping HPA handling\n"); |
05027adc TH |
1509 | dev->horkage |= ATA_HORKAGE_BROKEN_HPA; |
1510 | ||
1511 | /* we can continue if device aborted the command */ | |
1512 | if (rc == -EACCES) | |
1513 | rc = 0; | |
1e999736 | 1514 | } |
37301a55 | 1515 | |
05027adc TH |
1516 | return rc; |
1517 | } | |
5920dadf | 1518 | dev->n_native_sectors = native_sectors; |
05027adc TH |
1519 | |
1520 | /* nothing to do? */ | |
1521 | if (native_sectors <= sectors || !ata_ignore_hpa) { | |
1522 | if (!print_info || native_sectors == sectors) | |
1523 | return 0; | |
1524 | ||
1525 | if (native_sectors > sectors) | |
1526 | ata_dev_printk(dev, KERN_INFO, | |
1527 | "HPA detected: current %llu, native %llu\n", | |
1528 | (unsigned long long)sectors, | |
1529 | (unsigned long long)native_sectors); | |
1530 | else if (native_sectors < sectors) | |
1531 | ata_dev_printk(dev, KERN_WARNING, | |
1532 | "native sectors (%llu) is smaller than " | |
1533 | "sectors (%llu)\n", | |
1534 | (unsigned long long)native_sectors, | |
1535 | (unsigned long long)sectors); | |
1536 | return 0; | |
1537 | } | |
1538 | ||
1539 | /* let's unlock HPA */ | |
1540 | rc = ata_set_max_sectors(dev, native_sectors); | |
1541 | if (rc == -EACCES) { | |
1542 | /* if device aborted the command, skip HPA resizing */ | |
1543 | ata_dev_printk(dev, KERN_WARNING, "device aborted resize " | |
1544 | "(%llu -> %llu), skipping HPA handling\n", | |
1545 | (unsigned long long)sectors, | |
1546 | (unsigned long long)native_sectors); | |
1547 | dev->horkage |= ATA_HORKAGE_BROKEN_HPA; | |
1548 | return 0; | |
1549 | } else if (rc) | |
1550 | return rc; | |
1551 | ||
1552 | /* re-read IDENTIFY data */ | |
1553 | rc = ata_dev_reread_id(dev, 0); | |
1554 | if (rc) { | |
1555 | ata_dev_printk(dev, KERN_ERR, "failed to re-read IDENTIFY " | |
1556 | "data after HPA resizing\n"); | |
1557 | return rc; | |
1558 | } | |
1559 | ||
1560 | if (print_info) { | |
1561 | u64 new_sectors = ata_id_n_sectors(dev->id); | |
1562 | ata_dev_printk(dev, KERN_INFO, | |
1563 | "HPA unlocked: %llu -> %llu, native %llu\n", | |
1564 | (unsigned long long)sectors, | |
1565 | (unsigned long long)new_sectors, | |
1566 | (unsigned long long)native_sectors); | |
1567 | } | |
1568 | ||
1569 | return 0; | |
1e999736 AC |
1570 | } |
1571 | ||
1da177e4 LT |
1572 | /** |
1573 | * ata_dump_id - IDENTIFY DEVICE info debugging output | |
0bd3300a | 1574 | * @id: IDENTIFY DEVICE page to dump |
1da177e4 | 1575 | * |
0bd3300a TH |
1576 | * Dump selected 16-bit words from the given IDENTIFY DEVICE |
1577 | * page. | |
1da177e4 LT |
1578 | * |
1579 | * LOCKING: | |
1580 | * caller. | |
1581 | */ | |
1582 | ||
0bd3300a | 1583 | static inline void ata_dump_id(const u16 *id) |
1da177e4 LT |
1584 | { |
1585 | DPRINTK("49==0x%04x " | |
1586 | "53==0x%04x " | |
1587 | "63==0x%04x " | |
1588 | "64==0x%04x " | |
1589 | "75==0x%04x \n", | |
0bd3300a TH |
1590 | id[49], |
1591 | id[53], | |
1592 | id[63], | |
1593 | id[64], | |
1594 | id[75]); | |
1da177e4 LT |
1595 | DPRINTK("80==0x%04x " |
1596 | "81==0x%04x " | |
1597 | "82==0x%04x " | |
1598 | "83==0x%04x " | |
1599 | "84==0x%04x \n", | |
0bd3300a TH |
1600 | id[80], |
1601 | id[81], | |
1602 | id[82], | |
1603 | id[83], | |
1604 | id[84]); | |
1da177e4 LT |
1605 | DPRINTK("88==0x%04x " |
1606 | "93==0x%04x\n", | |
0bd3300a TH |
1607 | id[88], |
1608 | id[93]); | |
1da177e4 LT |
1609 | } |
1610 | ||
cb95d562 TH |
1611 | /** |
1612 | * ata_id_xfermask - Compute xfermask from the given IDENTIFY data | |
1613 | * @id: IDENTIFY data to compute xfer mask from | |
1614 | * | |
1615 | * Compute the xfermask for this device. This is not as trivial | |
1616 | * as it seems if we must consider early devices correctly. | |
1617 | * | |
1618 | * FIXME: pre IDE drive timing (do we care ?). | |
1619 | * | |
1620 | * LOCKING: | |
1621 | * None. | |
1622 | * | |
1623 | * RETURNS: | |
1624 | * Computed xfermask | |
1625 | */ | |
7dc951ae | 1626 | unsigned long ata_id_xfermask(const u16 *id) |
cb95d562 | 1627 | { |
7dc951ae | 1628 | unsigned long pio_mask, mwdma_mask, udma_mask; |
cb95d562 TH |
1629 | |
1630 | /* Usual case. Word 53 indicates word 64 is valid */ | |
1631 | if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { | |
1632 | pio_mask = id[ATA_ID_PIO_MODES] & 0x03; | |
1633 | pio_mask <<= 3; | |
1634 | pio_mask |= 0x7; | |
1635 | } else { | |
1636 | /* If word 64 isn't valid then Word 51 high byte holds | |
1637 | * the PIO timing number for the maximum. Turn it into | |
1638 | * a mask. | |
1639 | */ | |
7a0f1c8a | 1640 | u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF; |
46767aeb | 1641 | if (mode < 5) /* Valid PIO range */ |
2dcb407e | 1642 | pio_mask = (2 << mode) - 1; |
46767aeb AC |
1643 | else |
1644 | pio_mask = 1; | |
cb95d562 TH |
1645 | |
1646 | /* But wait.. there's more. Design your standards by | |
1647 | * committee and you too can get a free iordy field to | |
1648 | * process. However its the speeds not the modes that | |
1649 | * are supported... Note drivers using the timing API | |
1650 | * will get this right anyway | |
1651 | */ | |
1652 | } | |
1653 | ||
1654 | mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; | |
fb21f0d0 | 1655 | |
b352e57d AC |
1656 | if (ata_id_is_cfa(id)) { |
1657 | /* | |
1658 | * Process compact flash extended modes | |
1659 | */ | |
62afe5d7 SS |
1660 | int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7; |
1661 | int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7; | |
b352e57d AC |
1662 | |
1663 | if (pio) | |
1664 | pio_mask |= (1 << 5); | |
1665 | if (pio > 1) | |
1666 | pio_mask |= (1 << 6); | |
1667 | if (dma) | |
1668 | mwdma_mask |= (1 << 3); | |
1669 | if (dma > 1) | |
1670 | mwdma_mask |= (1 << 4); | |
1671 | } | |
1672 | ||
fb21f0d0 TH |
1673 | udma_mask = 0; |
1674 | if (id[ATA_ID_FIELD_VALID] & (1 << 2)) | |
1675 | udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; | |
cb95d562 TH |
1676 | |
1677 | return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); | |
1678 | } | |
1679 | ||
86e45b6b | 1680 | /** |
442eacc3 | 1681 | * ata_pio_queue_task - Queue port_task |
86e45b6b | 1682 | * @ap: The ata_port to queue port_task for |
65f27f38 | 1683 | * @data: data for @fn to use |
341c2c95 | 1684 | * @delay: delay time in msecs for workqueue function |
86e45b6b TH |
1685 | * |
1686 | * Schedule @fn(@data) for execution after @delay jiffies using | |
1687 | * port_task. There is one port_task per port and it's the | |
1688 | * user(low level driver)'s responsibility to make sure that only | |
1689 | * one task is active at any given time. | |
1690 | * | |
1691 | * libata core layer takes care of synchronization between | |
442eacc3 | 1692 | * port_task and EH. ata_pio_queue_task() may be ignored for EH |
86e45b6b TH |
1693 | * synchronization. |
1694 | * | |
1695 | * LOCKING: | |
1696 | * Inherited from caller. | |
1697 | */ | |
624d5c51 | 1698 | void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay) |
86e45b6b | 1699 | { |
65f27f38 | 1700 | ap->port_task_data = data; |
86e45b6b | 1701 | |
45a66c1c | 1702 | /* may fail if ata_port_flush_task() in progress */ |
341c2c95 | 1703 | queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay)); |
86e45b6b TH |
1704 | } |
1705 | ||
1706 | /** | |
1707 | * ata_port_flush_task - Flush port_task | |
1708 | * @ap: The ata_port to flush port_task for | |
1709 | * | |
1710 | * After this function completes, port_task is guranteed not to | |
1711 | * be running or scheduled. | |
1712 | * | |
1713 | * LOCKING: | |
1714 | * Kernel thread context (may sleep) | |
1715 | */ | |
1716 | void ata_port_flush_task(struct ata_port *ap) | |
1717 | { | |
86e45b6b TH |
1718 | DPRINTK("ENTER\n"); |
1719 | ||
45a66c1c | 1720 | cancel_rearming_delayed_work(&ap->port_task); |
86e45b6b | 1721 | |
0dd4b21f | 1722 | if (ata_msg_ctl(ap)) |
7f5e4e8d | 1723 | ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__); |
86e45b6b TH |
1724 | } |
1725 | ||
7102d230 | 1726 | static void ata_qc_complete_internal(struct ata_queued_cmd *qc) |
a2a7a662 | 1727 | { |
77853bf2 | 1728 | struct completion *waiting = qc->private_data; |
a2a7a662 | 1729 | |
a2a7a662 | 1730 | complete(waiting); |
a2a7a662 TH |
1731 | } |
1732 | ||
1733 | /** | |
2432697b | 1734 | * ata_exec_internal_sg - execute libata internal command |
a2a7a662 TH |
1735 | * @dev: Device to which the command is sent |
1736 | * @tf: Taskfile registers for the command and the result | |
d69cf37d | 1737 | * @cdb: CDB for packet command |
a2a7a662 | 1738 | * @dma_dir: Data tranfer direction of the command |
5c1ad8b3 | 1739 | * @sgl: sg list for the data buffer of the command |
2432697b | 1740 | * @n_elem: Number of sg entries |
2b789108 | 1741 | * @timeout: Timeout in msecs (0 for default) |
a2a7a662 TH |
1742 | * |
1743 | * Executes libata internal command with timeout. @tf contains | |
1744 | * command on entry and result on return. Timeout and error | |
1745 | * conditions are reported via return value. No recovery action | |
1746 | * is taken after a command times out. It's caller's duty to | |
1747 | * clean up after timeout. | |
1748 | * | |
1749 | * LOCKING: | |
1750 | * None. Should be called with kernel context, might sleep. | |
551e8889 TH |
1751 | * |
1752 | * RETURNS: | |
1753 | * Zero on success, AC_ERR_* mask on failure | |
a2a7a662 | 1754 | */ |
2432697b TH |
1755 | unsigned ata_exec_internal_sg(struct ata_device *dev, |
1756 | struct ata_taskfile *tf, const u8 *cdb, | |
87260216 | 1757 | int dma_dir, struct scatterlist *sgl, |
2b789108 | 1758 | unsigned int n_elem, unsigned long timeout) |
a2a7a662 | 1759 | { |
9af5c9c9 TH |
1760 | struct ata_link *link = dev->link; |
1761 | struct ata_port *ap = link->ap; | |
a2a7a662 | 1762 | u8 command = tf->command; |
87fbc5a0 | 1763 | int auto_timeout = 0; |
a2a7a662 | 1764 | struct ata_queued_cmd *qc; |
2ab7db1f | 1765 | unsigned int tag, preempted_tag; |
dedaf2b0 | 1766 | u32 preempted_sactive, preempted_qc_active; |
da917d69 | 1767 | int preempted_nr_active_links; |
60be6b9a | 1768 | DECLARE_COMPLETION_ONSTACK(wait); |
a2a7a662 | 1769 | unsigned long flags; |
77853bf2 | 1770 | unsigned int err_mask; |
d95a717f | 1771 | int rc; |
a2a7a662 | 1772 | |
ba6a1308 | 1773 | spin_lock_irqsave(ap->lock, flags); |
a2a7a662 | 1774 | |
e3180499 | 1775 | /* no internal command while frozen */ |
b51e9e5d | 1776 | if (ap->pflags & ATA_PFLAG_FROZEN) { |
ba6a1308 | 1777 | spin_unlock_irqrestore(ap->lock, flags); |
e3180499 TH |
1778 | return AC_ERR_SYSTEM; |
1779 | } | |
1780 | ||
2ab7db1f | 1781 | /* initialize internal qc */ |
a2a7a662 | 1782 | |
2ab7db1f TH |
1783 | /* XXX: Tag 0 is used for drivers with legacy EH as some |
1784 | * drivers choke if any other tag is given. This breaks | |
1785 | * ata_tag_internal() test for those drivers. Don't use new | |
1786 | * EH stuff without converting to it. | |
1787 | */ | |
1788 | if (ap->ops->error_handler) | |
1789 | tag = ATA_TAG_INTERNAL; | |
1790 | else | |
1791 | tag = 0; | |
1792 | ||
8a8bc223 TH |
1793 | if (test_and_set_bit(tag, &ap->qc_allocated)) |
1794 | BUG(); | |
f69499f4 | 1795 | qc = __ata_qc_from_tag(ap, tag); |
2ab7db1f TH |
1796 | |
1797 | qc->tag = tag; | |
1798 | qc->scsicmd = NULL; | |
1799 | qc->ap = ap; | |
1800 | qc->dev = dev; | |
1801 | ata_qc_reinit(qc); | |
1802 | ||
9af5c9c9 TH |
1803 | preempted_tag = link->active_tag; |
1804 | preempted_sactive = link->sactive; | |
dedaf2b0 | 1805 | preempted_qc_active = ap->qc_active; |
da917d69 | 1806 | preempted_nr_active_links = ap->nr_active_links; |
9af5c9c9 TH |
1807 | link->active_tag = ATA_TAG_POISON; |
1808 | link->sactive = 0; | |
dedaf2b0 | 1809 | ap->qc_active = 0; |
da917d69 | 1810 | ap->nr_active_links = 0; |
2ab7db1f TH |
1811 | |
1812 | /* prepare & issue qc */ | |
a2a7a662 | 1813 | qc->tf = *tf; |
d69cf37d TH |
1814 | if (cdb) |
1815 | memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); | |
e61e0672 | 1816 | qc->flags |= ATA_QCFLAG_RESULT_TF; |
a2a7a662 TH |
1817 | qc->dma_dir = dma_dir; |
1818 | if (dma_dir != DMA_NONE) { | |
2432697b | 1819 | unsigned int i, buflen = 0; |
87260216 | 1820 | struct scatterlist *sg; |
2432697b | 1821 | |
87260216 JA |
1822 | for_each_sg(sgl, sg, n_elem, i) |
1823 | buflen += sg->length; | |
2432697b | 1824 | |
87260216 | 1825 | ata_sg_init(qc, sgl, n_elem); |
49c80429 | 1826 | qc->nbytes = buflen; |
a2a7a662 TH |
1827 | } |
1828 | ||
77853bf2 | 1829 | qc->private_data = &wait; |
a2a7a662 TH |
1830 | qc->complete_fn = ata_qc_complete_internal; |
1831 | ||
8e0e694a | 1832 | ata_qc_issue(qc); |
a2a7a662 | 1833 | |
ba6a1308 | 1834 | spin_unlock_irqrestore(ap->lock, flags); |
a2a7a662 | 1835 | |
87fbc5a0 TH |
1836 | if (!timeout) { |
1837 | if (ata_probe_timeout) | |
1838 | timeout = ata_probe_timeout * 1000; | |
1839 | else { | |
1840 | timeout = ata_internal_cmd_timeout(dev, command); | |
1841 | auto_timeout = 1; | |
1842 | } | |
1843 | } | |
2b789108 TH |
1844 | |
1845 | rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); | |
d95a717f TH |
1846 | |
1847 | ata_port_flush_task(ap); | |
41ade50c | 1848 | |
d95a717f | 1849 | if (!rc) { |
ba6a1308 | 1850 | spin_lock_irqsave(ap->lock, flags); |
a2a7a662 TH |
1851 | |
1852 | /* We're racing with irq here. If we lose, the | |
1853 | * following test prevents us from completing the qc | |
d95a717f TH |
1854 | * twice. If we win, the port is frozen and will be |
1855 | * cleaned up by ->post_internal_cmd(). | |
a2a7a662 | 1856 | */ |
77853bf2 | 1857 | if (qc->flags & ATA_QCFLAG_ACTIVE) { |
d95a717f TH |
1858 | qc->err_mask |= AC_ERR_TIMEOUT; |
1859 | ||
1860 | if (ap->ops->error_handler) | |
1861 | ata_port_freeze(ap); | |
1862 | else | |
1863 | ata_qc_complete(qc); | |
f15a1daf | 1864 | |
0dd4b21f BP |
1865 | if (ata_msg_warn(ap)) |
1866 | ata_dev_printk(dev, KERN_WARNING, | |
88574551 | 1867 | "qc timeout (cmd 0x%x)\n", command); |
a2a7a662 TH |
1868 | } |
1869 | ||
ba6a1308 | 1870 | spin_unlock_irqrestore(ap->lock, flags); |
a2a7a662 TH |
1871 | } |
1872 | ||
d95a717f TH |
1873 | /* do post_internal_cmd */ |
1874 | if (ap->ops->post_internal_cmd) | |
1875 | ap->ops->post_internal_cmd(qc); | |
1876 | ||
a51d644a TH |
1877 | /* perform minimal error analysis */ |
1878 | if (qc->flags & ATA_QCFLAG_FAILED) { | |
1879 | if (qc->result_tf.command & (ATA_ERR | ATA_DF)) | |
1880 | qc->err_mask |= AC_ERR_DEV; | |
1881 | ||
1882 | if (!qc->err_mask) | |
1883 | qc->err_mask |= AC_ERR_OTHER; | |
1884 | ||
1885 | if (qc->err_mask & ~AC_ERR_OTHER) | |
1886 | qc->err_mask &= ~AC_ERR_OTHER; | |
d95a717f TH |
1887 | } |
1888 | ||
15869303 | 1889 | /* finish up */ |
ba6a1308 | 1890 | spin_lock_irqsave(ap->lock, flags); |
15869303 | 1891 | |
e61e0672 | 1892 | *tf = qc->result_tf; |
77853bf2 TH |
1893 | err_mask = qc->err_mask; |
1894 | ||
1895 | ata_qc_free(qc); | |
9af5c9c9 TH |
1896 | link->active_tag = preempted_tag; |
1897 | link->sactive = preempted_sactive; | |
dedaf2b0 | 1898 | ap->qc_active = preempted_qc_active; |
da917d69 | 1899 | ap->nr_active_links = preempted_nr_active_links; |
77853bf2 | 1900 | |
1f7dd3e9 TH |
1901 | /* XXX - Some LLDDs (sata_mv) disable port on command failure. |
1902 | * Until those drivers are fixed, we detect the condition | |
1903 | * here, fail the command with AC_ERR_SYSTEM and reenable the | |
1904 | * port. | |
1905 | * | |
1906 | * Note that this doesn't change any behavior as internal | |
1907 | * command failure results in disabling the device in the | |
1908 | * higher layer for LLDDs without new reset/EH callbacks. | |
1909 | * | |
1910 | * Kill the following code as soon as those drivers are fixed. | |
1911 | */ | |
198e0fed | 1912 | if (ap->flags & ATA_FLAG_DISABLED) { |
1f7dd3e9 TH |
1913 | err_mask |= AC_ERR_SYSTEM; |
1914 | ata_port_probe(ap); | |
1915 | } | |
1916 | ||
ba6a1308 | 1917 | spin_unlock_irqrestore(ap->lock, flags); |
15869303 | 1918 | |
87fbc5a0 TH |
1919 | if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout) |
1920 | ata_internal_cmd_timed_out(dev, command); | |
1921 | ||
77853bf2 | 1922 | return err_mask; |
a2a7a662 TH |
1923 | } |
1924 | ||
2432697b | 1925 | /** |
33480a0e | 1926 | * ata_exec_internal - execute libata internal command |
2432697b TH |
1927 | * @dev: Device to which the command is sent |
1928 | * @tf: Taskfile registers for the command and the result | |
1929 | * @cdb: CDB for packet command | |
1930 | * @dma_dir: Data tranfer direction of the command | |
1931 | * @buf: Data buffer of the command | |
1932 | * @buflen: Length of data buffer | |
2b789108 | 1933 | * @timeout: Timeout in msecs (0 for default) |
2432697b TH |
1934 | * |
1935 | * Wrapper around ata_exec_internal_sg() which takes simple | |
1936 | * buffer instead of sg list. | |
1937 | * | |
1938 | * LOCKING: | |
1939 | * None. Should be called with kernel context, might sleep. | |
1940 | * | |
1941 | * RETURNS: | |
1942 | * Zero on success, AC_ERR_* mask on failure | |
1943 | */ | |
1944 | unsigned ata_exec_internal(struct ata_device *dev, | |
1945 | struct ata_taskfile *tf, const u8 *cdb, | |
2b789108 TH |
1946 | int dma_dir, void *buf, unsigned int buflen, |
1947 | unsigned long timeout) | |
2432697b | 1948 | { |
33480a0e TH |
1949 | struct scatterlist *psg = NULL, sg; |
1950 | unsigned int n_elem = 0; | |
2432697b | 1951 | |
33480a0e TH |
1952 | if (dma_dir != DMA_NONE) { |
1953 | WARN_ON(!buf); | |
1954 | sg_init_one(&sg, buf, buflen); | |
1955 | psg = &sg; | |
1956 | n_elem++; | |
1957 | } | |
2432697b | 1958 | |
2b789108 TH |
1959 | return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem, |
1960 | timeout); | |
2432697b TH |
1961 | } |
1962 | ||
977e6b9f TH |
1963 | /** |
1964 | * ata_do_simple_cmd - execute simple internal command | |
1965 | * @dev: Device to which the command is sent | |
1966 | * @cmd: Opcode to execute | |
1967 | * | |
1968 | * Execute a 'simple' command, that only consists of the opcode | |
1969 | * 'cmd' itself, without filling any other registers | |
1970 | * | |
1971 | * LOCKING: | |
1972 | * Kernel thread context (may sleep). | |
1973 | * | |
1974 | * RETURNS: | |
1975 | * Zero on success, AC_ERR_* mask on failure | |
e58eb583 | 1976 | */ |
77b08fb5 | 1977 | unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) |
e58eb583 TH |
1978 | { |
1979 | struct ata_taskfile tf; | |
e58eb583 TH |
1980 | |
1981 | ata_tf_init(dev, &tf); | |
1982 | ||
1983 | tf.command = cmd; | |
1984 | tf.flags |= ATA_TFLAG_DEVICE; | |
1985 | tf.protocol = ATA_PROT_NODATA; | |
1986 | ||
2b789108 | 1987 | return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
e58eb583 TH |
1988 | } |
1989 | ||
1bc4ccff AC |
1990 | /** |
1991 | * ata_pio_need_iordy - check if iordy needed | |
1992 | * @adev: ATA device | |
1993 | * | |
1994 | * Check if the current speed of the device requires IORDY. Used | |
1995 | * by various controllers for chip configuration. | |
1996 | */ | |
1bc4ccff AC |
1997 | unsigned int ata_pio_need_iordy(const struct ata_device *adev) |
1998 | { | |
0d9e6659 TH |
1999 | /* Don't set IORDY if we're preparing for reset. IORDY may |
2000 | * lead to controller lock up on certain controllers if the | |
2001 | * port is not occupied. See bko#11703 for details. | |
2002 | */ | |
2003 | if (adev->link->ap->pflags & ATA_PFLAG_RESETTING) | |
2004 | return 0; | |
2005 | /* Controller doesn't support IORDY. Probably a pointless | |
2006 | * check as the caller should know this. | |
2007 | */ | |
9af5c9c9 | 2008 | if (adev->link->ap->flags & ATA_FLAG_NO_IORDY) |
1bc4ccff | 2009 | return 0; |
5c18c4d2 DD |
2010 | /* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */ |
2011 | if (ata_id_is_cfa(adev->id) | |
2012 | && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6)) | |
2013 | return 0; | |
432729f0 AC |
2014 | /* PIO3 and higher it is mandatory */ |
2015 | if (adev->pio_mode > XFER_PIO_2) | |
2016 | return 1; | |
2017 | /* We turn it on when possible */ | |
2018 | if (ata_id_has_iordy(adev->id)) | |
1bc4ccff | 2019 | return 1; |
432729f0 AC |
2020 | return 0; |
2021 | } | |
2e9edbf8 | 2022 | |
432729f0 AC |
2023 | /** |
2024 | * ata_pio_mask_no_iordy - Return the non IORDY mask | |
2025 | * @adev: ATA device | |
2026 | * | |
2027 | * Compute the highest mode possible if we are not using iordy. Return | |
2028 | * -1 if no iordy mode is available. | |
2029 | */ | |
432729f0 AC |
2030 | static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) |
2031 | { | |
1bc4ccff | 2032 | /* If we have no drive specific rule, then PIO 2 is non IORDY */ |
1bc4ccff | 2033 | if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ |
432729f0 | 2034 | u16 pio = adev->id[ATA_ID_EIDE_PIO]; |
1bc4ccff AC |
2035 | /* Is the speed faster than the drive allows non IORDY ? */ |
2036 | if (pio) { | |
2037 | /* This is cycle times not frequency - watch the logic! */ | |
2038 | if (pio > 240) /* PIO2 is 240nS per cycle */ | |
432729f0 AC |
2039 | return 3 << ATA_SHIFT_PIO; |
2040 | return 7 << ATA_SHIFT_PIO; | |
1bc4ccff AC |
2041 | } |
2042 | } | |
432729f0 | 2043 | return 3 << ATA_SHIFT_PIO; |
1bc4ccff AC |
2044 | } |
2045 | ||
963e4975 AC |
2046 | /** |
2047 | * ata_do_dev_read_id - default ID read method | |
2048 | * @dev: device | |
2049 | * @tf: proposed taskfile | |
2050 | * @id: data buffer | |
2051 | * | |
2052 | * Issue the identify taskfile and hand back the buffer containing | |
2053 | * identify data. For some RAID controllers and for pre ATA devices | |
2054 | * this function is wrapped or replaced by the driver | |
2055 | */ | |
2056 | unsigned int ata_do_dev_read_id(struct ata_device *dev, | |
2057 | struct ata_taskfile *tf, u16 *id) | |
2058 | { | |
2059 | return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE, | |
2060 | id, sizeof(id[0]) * ATA_ID_WORDS, 0); | |
2061 | } | |
2062 | ||
1da177e4 | 2063 | /** |
49016aca | 2064 | * ata_dev_read_id - Read ID data from the specified device |
49016aca TH |
2065 | * @dev: target device |
2066 | * @p_class: pointer to class of the target device (may be changed) | |
bff04647 | 2067 | * @flags: ATA_READID_* flags |
fe635c7e | 2068 | * @id: buffer to read IDENTIFY data into |
1da177e4 | 2069 | * |
49016aca TH |
2070 | * Read ID data from the specified device. ATA_CMD_ID_ATA is |
2071 | * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI | |
aec5c3c1 TH |
2072 | * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS |
2073 | * for pre-ATA4 drives. | |
1da177e4 | 2074 | * |
50a99018 | 2075 | * FIXME: ATA_CMD_ID_ATA is optional for early drives and right |
2dcb407e | 2076 | * now we abort if we hit that case. |
50a99018 | 2077 | * |
1da177e4 | 2078 | * LOCKING: |
49016aca TH |
2079 | * Kernel thread context (may sleep) |
2080 | * | |
2081 | * RETURNS: | |
2082 | * 0 on success, -errno otherwise. | |
1da177e4 | 2083 | */ |
a9beec95 | 2084 | int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, |
bff04647 | 2085 | unsigned int flags, u16 *id) |
1da177e4 | 2086 | { |
9af5c9c9 | 2087 | struct ata_port *ap = dev->link->ap; |
49016aca | 2088 | unsigned int class = *p_class; |
a0123703 | 2089 | struct ata_taskfile tf; |
49016aca TH |
2090 | unsigned int err_mask = 0; |
2091 | const char *reason; | |
79b42bab | 2092 | bool is_semb = class == ATA_DEV_SEMB; |
54936f8b | 2093 | int may_fallback = 1, tried_spinup = 0; |
49016aca | 2094 | int rc; |
1da177e4 | 2095 | |
0dd4b21f | 2096 | if (ata_msg_ctl(ap)) |
7f5e4e8d | 2097 | ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); |
1da177e4 | 2098 | |
963e4975 | 2099 | retry: |
3373efd8 | 2100 | ata_tf_init(dev, &tf); |
a0123703 | 2101 | |
49016aca | 2102 | switch (class) { |
79b42bab TH |
2103 | case ATA_DEV_SEMB: |
2104 | class = ATA_DEV_ATA; /* some hard drives report SEMB sig */ | |
49016aca | 2105 | case ATA_DEV_ATA: |
a0123703 | 2106 | tf.command = ATA_CMD_ID_ATA; |
49016aca TH |
2107 | break; |
2108 | case ATA_DEV_ATAPI: | |
a0123703 | 2109 | tf.command = ATA_CMD_ID_ATAPI; |
49016aca TH |
2110 | break; |
2111 | default: | |
2112 | rc = -ENODEV; | |
2113 | reason = "unsupported class"; | |
2114 | goto err_out; | |
1da177e4 LT |
2115 | } |
2116 | ||
a0123703 | 2117 | tf.protocol = ATA_PROT_PIO; |
81afe893 TH |
2118 | |
2119 | /* Some devices choke if TF registers contain garbage. Make | |
2120 | * sure those are properly initialized. | |
2121 | */ | |
2122 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
2123 | ||
2124 | /* Device presence detection is unreliable on some | |
2125 | * controllers. Always poll IDENTIFY if available. | |
2126 | */ | |
2127 | tf.flags |= ATA_TFLAG_POLLING; | |
1da177e4 | 2128 | |
963e4975 AC |
2129 | if (ap->ops->read_id) |
2130 | err_mask = ap->ops->read_id(dev, &tf, id); | |
2131 | else | |
2132 | err_mask = ata_do_dev_read_id(dev, &tf, id); | |
2133 | ||
a0123703 | 2134 | if (err_mask) { |
800b3996 | 2135 | if (err_mask & AC_ERR_NODEV_HINT) { |
1ffc151f TH |
2136 | ata_dev_printk(dev, KERN_DEBUG, |
2137 | "NODEV after polling detection\n"); | |
55a8e2c8 TH |
2138 | return -ENOENT; |
2139 | } | |
2140 | ||
79b42bab TH |
2141 | if (is_semb) { |
2142 | ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on " | |
2143 | "device w/ SEMB sig, disabled\n"); | |
2144 | /* SEMB is not supported yet */ | |
2145 | *p_class = ATA_DEV_SEMB_UNSUP; | |
2146 | return 0; | |
2147 | } | |
2148 | ||
1ffc151f TH |
2149 | if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { |
2150 | /* Device or controller might have reported | |
2151 | * the wrong device class. Give a shot at the | |
2152 | * other IDENTIFY if the current one is | |
2153 | * aborted by the device. | |
2154 | */ | |
2155 | if (may_fallback) { | |
2156 | may_fallback = 0; | |
2157 | ||
2158 | if (class == ATA_DEV_ATA) | |
2159 | class = ATA_DEV_ATAPI; | |
2160 | else | |
2161 | class = ATA_DEV_ATA; | |
2162 | goto retry; | |
2163 | } | |
2164 | ||
2165 | /* Control reaches here iff the device aborted | |
2166 | * both flavors of IDENTIFYs which happens | |
2167 | * sometimes with phantom devices. | |
2168 | */ | |
2169 | ata_dev_printk(dev, KERN_DEBUG, | |
2170 | "both IDENTIFYs aborted, assuming NODEV\n"); | |
2171 | return -ENOENT; | |
54936f8b TH |
2172 | } |
2173 | ||
49016aca TH |
2174 | rc = -EIO; |
2175 | reason = "I/O error"; | |
1da177e4 LT |
2176 | goto err_out; |
2177 | } | |
2178 | ||
54936f8b TH |
2179 | /* Falling back doesn't make sense if ID data was read |
2180 | * successfully at least once. | |
2181 | */ | |
2182 | may_fallback = 0; | |
2183 | ||
49016aca | 2184 | swap_buf_le16(id, ATA_ID_WORDS); |
1da177e4 | 2185 | |
49016aca | 2186 | /* sanity check */ |
a4f5749b | 2187 | rc = -EINVAL; |
6070068b | 2188 | reason = "device reports invalid type"; |
a4f5749b TH |
2189 | |
2190 | if (class == ATA_DEV_ATA) { | |
2191 | if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) | |
2192 | goto err_out; | |
2193 | } else { | |
2194 | if (ata_id_is_ata(id)) | |
2195 | goto err_out; | |
49016aca TH |
2196 | } |
2197 | ||
169439c2 ML |
2198 | if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) { |
2199 | tried_spinup = 1; | |
2200 | /* | |
2201 | * Drive powered-up in standby mode, and requires a specific | |
2202 | * SET_FEATURES spin-up subcommand before it will accept | |
2203 | * anything other than the original IDENTIFY command. | |
2204 | */ | |
218f3d30 | 2205 | err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0); |
fb0582f9 | 2206 | if (err_mask && id[2] != 0x738c) { |
169439c2 ML |
2207 | rc = -EIO; |
2208 | reason = "SPINUP failed"; | |
2209 | goto err_out; | |
2210 | } | |
2211 | /* | |
2212 | * If the drive initially returned incomplete IDENTIFY info, | |
2213 | * we now must reissue the IDENTIFY command. | |
2214 | */ | |
2215 | if (id[2] == 0x37c8) | |
2216 | goto retry; | |
2217 | } | |
2218 | ||
bff04647 | 2219 | if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) { |
49016aca TH |
2220 | /* |
2221 | * The exact sequence expected by certain pre-ATA4 drives is: | |
2222 | * SRST RESET | |
50a99018 AC |
2223 | * IDENTIFY (optional in early ATA) |
2224 | * INITIALIZE DEVICE PARAMETERS (later IDE and ATA) | |
49016aca TH |
2225 | * anything else.. |
2226 | * Some drives were very specific about that exact sequence. | |
50a99018 AC |
2227 | * |
2228 | * Note that ATA4 says lba is mandatory so the second check | |
2229 | * shoud never trigger. | |
49016aca TH |
2230 | */ |
2231 | if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { | |
3373efd8 | 2232 | err_mask = ata_dev_init_params(dev, id[3], id[6]); |
49016aca TH |
2233 | if (err_mask) { |
2234 | rc = -EIO; | |
2235 | reason = "INIT_DEV_PARAMS failed"; | |
2236 | goto err_out; | |
2237 | } | |
2238 | ||
2239 | /* current CHS translation info (id[53-58]) might be | |
2240 | * changed. reread the identify device info. | |
2241 | */ | |
bff04647 | 2242 | flags &= ~ATA_READID_POSTRESET; |
49016aca TH |
2243 | goto retry; |
2244 | } | |
2245 | } | |
2246 | ||
2247 | *p_class = class; | |
fe635c7e | 2248 | |
49016aca TH |
2249 | return 0; |
2250 | ||
2251 | err_out: | |
88574551 | 2252 | if (ata_msg_warn(ap)) |
0dd4b21f | 2253 | ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " |
88574551 | 2254 | "(%s, err_mask=0x%x)\n", reason, err_mask); |
49016aca TH |
2255 | return rc; |
2256 | } | |
2257 | ||
9062712f TH |
2258 | static int ata_do_link_spd_horkage(struct ata_device *dev) |
2259 | { | |
2260 | struct ata_link *plink = ata_dev_phys_link(dev); | |
2261 | u32 target, target_limit; | |
2262 | ||
2263 | if (!sata_scr_valid(plink)) | |
2264 | return 0; | |
2265 | ||
2266 | if (dev->horkage & ATA_HORKAGE_1_5_GBPS) | |
2267 | target = 1; | |
2268 | else | |
2269 | return 0; | |
2270 | ||
2271 | target_limit = (1 << target) - 1; | |
2272 | ||
2273 | /* if already on stricter limit, no need to push further */ | |
2274 | if (plink->sata_spd_limit <= target_limit) | |
2275 | return 0; | |
2276 | ||
2277 | plink->sata_spd_limit = target_limit; | |
2278 | ||
2279 | /* Request another EH round by returning -EAGAIN if link is | |
2280 | * going faster than the target speed. Forward progress is | |
2281 | * guaranteed by setting sata_spd_limit to target_limit above. | |
2282 | */ | |
2283 | if (plink->sata_spd > target) { | |
2284 | ata_dev_printk(dev, KERN_INFO, | |
2285 | "applying link speed limit horkage to %s\n", | |
2286 | sata_spd_string(target)); | |
2287 | return -EAGAIN; | |
2288 | } | |
2289 | return 0; | |
2290 | } | |
2291 | ||
3373efd8 | 2292 | static inline u8 ata_dev_knobble(struct ata_device *dev) |
4b2f3ede | 2293 | { |
9af5c9c9 | 2294 | struct ata_port *ap = dev->link->ap; |
9ce8e307 JA |
2295 | |
2296 | if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK) | |
2297 | return 0; | |
2298 | ||
9af5c9c9 | 2299 | return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); |
4b2f3ede TH |
2300 | } |
2301 | ||
a6e6ce8e TH |
2302 | static void ata_dev_config_ncq(struct ata_device *dev, |
2303 | char *desc, size_t desc_sz) | |
2304 | { | |
9af5c9c9 | 2305 | struct ata_port *ap = dev->link->ap; |
a6e6ce8e TH |
2306 | int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); |
2307 | ||
2308 | if (!ata_id_has_ncq(dev->id)) { | |
2309 | desc[0] = '\0'; | |
2310 | return; | |
2311 | } | |
75683fe7 | 2312 | if (dev->horkage & ATA_HORKAGE_NONCQ) { |
6919a0a6 AC |
2313 | snprintf(desc, desc_sz, "NCQ (not used)"); |
2314 | return; | |
2315 | } | |
a6e6ce8e | 2316 | if (ap->flags & ATA_FLAG_NCQ) { |
cca3974e | 2317 | hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); |
a6e6ce8e TH |
2318 | dev->flags |= ATA_DFLAG_NCQ; |
2319 | } | |
2320 | ||
2321 | if (hdepth >= ddepth) | |
2322 | snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); | |
2323 | else | |
2324 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); | |
2325 | } | |
2326 | ||
49016aca | 2327 | /** |
ffeae418 | 2328 | * ata_dev_configure - Configure the specified ATA/ATAPI device |
ffeae418 TH |
2329 | * @dev: Target device to configure |
2330 | * | |
2331 | * Configure @dev according to @dev->id. Generic and low-level | |
2332 | * driver specific fixups are also applied. | |
49016aca TH |
2333 | * |
2334 | * LOCKING: | |
ffeae418 TH |
2335 | * Kernel thread context (may sleep) |
2336 | * | |
2337 | * RETURNS: | |
2338 | * 0 on success, -errno otherwise | |
49016aca | 2339 | */ |
efdaedc4 | 2340 | int ata_dev_configure(struct ata_device *dev) |
49016aca | 2341 | { |
9af5c9c9 TH |
2342 | struct ata_port *ap = dev->link->ap; |
2343 | struct ata_eh_context *ehc = &dev->link->eh_context; | |
6746544c | 2344 | int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; |
1148c3a7 | 2345 | const u16 *id = dev->id; |
7dc951ae | 2346 | unsigned long xfer_mask; |
b352e57d | 2347 | char revbuf[7]; /* XYZ-99\0 */ |
3f64f565 EM |
2348 | char fwrevbuf[ATA_ID_FW_REV_LEN+1]; |
2349 | char modelbuf[ATA_ID_PROD_LEN+1]; | |
e6d902a3 | 2350 | int rc; |
49016aca | 2351 | |
0dd4b21f | 2352 | if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { |
44877b4e | 2353 | ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n", |
7f5e4e8d | 2354 | __func__); |
ffeae418 | 2355 | return 0; |
49016aca TH |
2356 | } |
2357 | ||
0dd4b21f | 2358 | if (ata_msg_probe(ap)) |
7f5e4e8d | 2359 | ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); |
1da177e4 | 2360 | |
75683fe7 TH |
2361 | /* set horkage */ |
2362 | dev->horkage |= ata_dev_blacklisted(dev); | |
33267325 | 2363 | ata_force_horkage(dev); |
75683fe7 | 2364 | |
50af2fa1 TH |
2365 | if (dev->horkage & ATA_HORKAGE_DISABLE) { |
2366 | ata_dev_printk(dev, KERN_INFO, | |
2367 | "unsupported device, disabling\n"); | |
2368 | ata_dev_disable(dev); | |
2369 | return 0; | |
2370 | } | |
2371 | ||
2486fa56 TH |
2372 | if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) && |
2373 | dev->class == ATA_DEV_ATAPI) { | |
2374 | ata_dev_printk(dev, KERN_WARNING, | |
2375 | "WARNING: ATAPI is %s, device ignored.\n", | |
2376 | atapi_enabled ? "not supported with this driver" | |
2377 | : "disabled"); | |
2378 | ata_dev_disable(dev); | |
2379 | return 0; | |
2380 | } | |
2381 | ||
9062712f TH |
2382 | rc = ata_do_link_spd_horkage(dev); |
2383 | if (rc) | |
2384 | return rc; | |
2385 | ||
6746544c TH |
2386 | /* let ACPI work its magic */ |
2387 | rc = ata_acpi_on_devcfg(dev); | |
2388 | if (rc) | |
2389 | return rc; | |
08573a86 | 2390 | |
05027adc TH |
2391 | /* massage HPA, do it early as it might change IDENTIFY data */ |
2392 | rc = ata_hpa_resize(dev); | |
2393 | if (rc) | |
2394 | return rc; | |
2395 | ||
c39f5ebe | 2396 | /* print device capabilities */ |
0dd4b21f | 2397 | if (ata_msg_probe(ap)) |
88574551 TH |
2398 | ata_dev_printk(dev, KERN_DEBUG, |
2399 | "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " | |
2400 | "85:%04x 86:%04x 87:%04x 88:%04x\n", | |
7f5e4e8d | 2401 | __func__, |
f15a1daf TH |
2402 | id[49], id[82], id[83], id[84], |
2403 | id[85], id[86], id[87], id[88]); | |
c39f5ebe | 2404 | |
208a9933 | 2405 | /* initialize to-be-configured parameters */ |
ea1dd4e1 | 2406 | dev->flags &= ~ATA_DFLAG_CFG_MASK; |
208a9933 TH |
2407 | dev->max_sectors = 0; |
2408 | dev->cdb_len = 0; | |
2409 | dev->n_sectors = 0; | |
2410 | dev->cylinders = 0; | |
2411 | dev->heads = 0; | |
2412 | dev->sectors = 0; | |
e18086d6 | 2413 | dev->multi_count = 0; |
208a9933 | 2414 | |
1da177e4 LT |
2415 | /* |
2416 | * common ATA, ATAPI feature tests | |
2417 | */ | |
2418 | ||
ff8854b2 | 2419 | /* find max transfer mode; for printk only */ |
1148c3a7 | 2420 | xfer_mask = ata_id_xfermask(id); |
1da177e4 | 2421 | |
0dd4b21f BP |
2422 | if (ata_msg_probe(ap)) |
2423 | ata_dump_id(id); | |
1da177e4 | 2424 | |
ef143d57 AL |
2425 | /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ |
2426 | ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, | |
2427 | sizeof(fwrevbuf)); | |
2428 | ||
2429 | ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD, | |
2430 | sizeof(modelbuf)); | |
2431 | ||
1da177e4 LT |
2432 | /* ATA-specific feature tests */ |
2433 | if (dev->class == ATA_DEV_ATA) { | |
b352e57d | 2434 | if (ata_id_is_cfa(id)) { |
62afe5d7 SS |
2435 | /* CPRM may make this media unusable */ |
2436 | if (id[ATA_ID_CFA_KEY_MGMT] & 1) | |
44877b4e TH |
2437 | ata_dev_printk(dev, KERN_WARNING, |
2438 | "supports DRM functions and may " | |
2439 | "not be fully accessable.\n"); | |
b352e57d | 2440 | snprintf(revbuf, 7, "CFA"); |
ae8d4ee7 | 2441 | } else { |
2dcb407e | 2442 | snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); |
ae8d4ee7 AC |
2443 | /* Warn the user if the device has TPM extensions */ |
2444 | if (ata_id_has_tpm(id)) | |
2445 | ata_dev_printk(dev, KERN_WARNING, | |
2446 | "supports DRM functions and may " | |
2447 | "not be fully accessable.\n"); | |
2448 | } | |
b352e57d | 2449 | |
1148c3a7 | 2450 | dev->n_sectors = ata_id_n_sectors(id); |
2940740b | 2451 | |
e18086d6 ML |
2452 | /* get current R/W Multiple count setting */ |
2453 | if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) { | |
2454 | unsigned int max = dev->id[47] & 0xff; | |
2455 | unsigned int cnt = dev->id[59] & 0xff; | |
2456 | /* only recognize/allow powers of two here */ | |
2457 | if (is_power_of_2(max) && is_power_of_2(cnt)) | |
2458 | if (cnt <= max) | |
2459 | dev->multi_count = cnt; | |
2460 | } | |
3f64f565 | 2461 | |
1148c3a7 | 2462 | if (ata_id_has_lba(id)) { |
4c2d721a | 2463 | const char *lba_desc; |
a6e6ce8e | 2464 | char ncq_desc[20]; |
8bf62ece | 2465 | |
4c2d721a TH |
2466 | lba_desc = "LBA"; |
2467 | dev->flags |= ATA_DFLAG_LBA; | |
1148c3a7 | 2468 | if (ata_id_has_lba48(id)) { |
8bf62ece | 2469 | dev->flags |= ATA_DFLAG_LBA48; |
4c2d721a | 2470 | lba_desc = "LBA48"; |
6fc49adb TH |
2471 | |
2472 | if (dev->n_sectors >= (1UL << 28) && | |
2473 | ata_id_has_flush_ext(id)) | |
2474 | dev->flags |= ATA_DFLAG_FLUSH_EXT; | |
4c2d721a | 2475 | } |
8bf62ece | 2476 | |
a6e6ce8e TH |
2477 | /* config NCQ */ |
2478 | ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); | |
2479 | ||
8bf62ece | 2480 | /* print device info to dmesg */ |
3f64f565 EM |
2481 | if (ata_msg_drv(ap) && print_info) { |
2482 | ata_dev_printk(dev, KERN_INFO, | |
2483 | "%s: %s, %s, max %s\n", | |
2484 | revbuf, modelbuf, fwrevbuf, | |
2485 | ata_mode_string(xfer_mask)); | |
2486 | ata_dev_printk(dev, KERN_INFO, | |
2487 | "%Lu sectors, multi %u: %s %s\n", | |
f15a1daf | 2488 | (unsigned long long)dev->n_sectors, |
3f64f565 EM |
2489 | dev->multi_count, lba_desc, ncq_desc); |
2490 | } | |
ffeae418 | 2491 | } else { |
8bf62ece AL |
2492 | /* CHS */ |
2493 | ||
2494 | /* Default translation */ | |
1148c3a7 TH |
2495 | dev->cylinders = id[1]; |
2496 | dev->heads = id[3]; | |
2497 | dev->sectors = id[6]; | |
8bf62ece | 2498 | |
1148c3a7 | 2499 | if (ata_id_current_chs_valid(id)) { |
8bf62ece | 2500 | /* Current CHS translation is valid. */ |
1148c3a7 TH |
2501 | dev->cylinders = id[54]; |
2502 | dev->heads = id[55]; | |
2503 | dev->sectors = id[56]; | |
8bf62ece AL |
2504 | } |
2505 | ||
2506 | /* print device info to dmesg */ | |
3f64f565 | 2507 | if (ata_msg_drv(ap) && print_info) { |
88574551 | 2508 | ata_dev_printk(dev, KERN_INFO, |
3f64f565 EM |
2509 | "%s: %s, %s, max %s\n", |
2510 | revbuf, modelbuf, fwrevbuf, | |
2511 | ata_mode_string(xfer_mask)); | |
a84471fe | 2512 | ata_dev_printk(dev, KERN_INFO, |
3f64f565 EM |
2513 | "%Lu sectors, multi %u, CHS %u/%u/%u\n", |
2514 | (unsigned long long)dev->n_sectors, | |
2515 | dev->multi_count, dev->cylinders, | |
2516 | dev->heads, dev->sectors); | |
2517 | } | |
07f6f7d0 AL |
2518 | } |
2519 | ||
6e7846e9 | 2520 | dev->cdb_len = 16; |
1da177e4 LT |
2521 | } |
2522 | ||
2523 | /* ATAPI-specific feature tests */ | |
2c13b7ce | 2524 | else if (dev->class == ATA_DEV_ATAPI) { |
854c73a2 TH |
2525 | const char *cdb_intr_string = ""; |
2526 | const char *atapi_an_string = ""; | |
91163006 | 2527 | const char *dma_dir_string = ""; |
7d77b247 | 2528 | u32 sntf; |
08a556db | 2529 | |
1148c3a7 | 2530 | rc = atapi_cdb_len(id); |
1da177e4 | 2531 | if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { |
0dd4b21f | 2532 | if (ata_msg_warn(ap)) |
88574551 TH |
2533 | ata_dev_printk(dev, KERN_WARNING, |
2534 | "unsupported CDB len\n"); | |
ffeae418 | 2535 | rc = -EINVAL; |
1da177e4 LT |
2536 | goto err_out_nosup; |
2537 | } | |
6e7846e9 | 2538 | dev->cdb_len = (unsigned int) rc; |
1da177e4 | 2539 | |
7d77b247 TH |
2540 | /* Enable ATAPI AN if both the host and device have |
2541 | * the support. If PMP is attached, SNTF is required | |
2542 | * to enable ATAPI AN to discern between PHY status | |
2543 | * changed notifications and ATAPI ANs. | |
9f45cbd3 | 2544 | */ |
7d77b247 | 2545 | if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && |
071f44b1 | 2546 | (!sata_pmp_attached(ap) || |
7d77b247 | 2547 | sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { |
854c73a2 TH |
2548 | unsigned int err_mask; |
2549 | ||
9f45cbd3 | 2550 | /* issue SET feature command to turn this on */ |
218f3d30 JG |
2551 | err_mask = ata_dev_set_feature(dev, |
2552 | SETFEATURES_SATA_ENABLE, SATA_AN); | |
854c73a2 | 2553 | if (err_mask) |
9f45cbd3 | 2554 | ata_dev_printk(dev, KERN_ERR, |
854c73a2 TH |
2555 | "failed to enable ATAPI AN " |
2556 | "(err_mask=0x%x)\n", err_mask); | |
2557 | else { | |
9f45cbd3 | 2558 | dev->flags |= ATA_DFLAG_AN; |
854c73a2 TH |
2559 | atapi_an_string = ", ATAPI AN"; |
2560 | } | |
9f45cbd3 KCA |
2561 | } |
2562 | ||
08a556db | 2563 | if (ata_id_cdb_intr(dev->id)) { |
312f7da2 | 2564 | dev->flags |= ATA_DFLAG_CDB_INTR; |
08a556db AL |
2565 | cdb_intr_string = ", CDB intr"; |
2566 | } | |
312f7da2 | 2567 | |
91163006 TH |
2568 | if (atapi_dmadir || atapi_id_dmadir(dev->id)) { |
2569 | dev->flags |= ATA_DFLAG_DMADIR; | |
2570 | dma_dir_string = ", DMADIR"; | |
2571 | } | |
2572 | ||
1da177e4 | 2573 | /* print device info to dmesg */ |
5afc8142 | 2574 | if (ata_msg_drv(ap) && print_info) |
ef143d57 | 2575 | ata_dev_printk(dev, KERN_INFO, |
91163006 | 2576 | "ATAPI: %s, %s, max %s%s%s%s\n", |
ef143d57 | 2577 | modelbuf, fwrevbuf, |
12436c30 | 2578 | ata_mode_string(xfer_mask), |
91163006 TH |
2579 | cdb_intr_string, atapi_an_string, |
2580 | dma_dir_string); | |
1da177e4 LT |
2581 | } |
2582 | ||
914ed354 TH |
2583 | /* determine max_sectors */ |
2584 | dev->max_sectors = ATA_MAX_SECTORS; | |
2585 | if (dev->flags & ATA_DFLAG_LBA48) | |
2586 | dev->max_sectors = ATA_MAX_SECTORS_LBA48; | |
2587 | ||
ca77329f KCA |
2588 | if (!(dev->horkage & ATA_HORKAGE_IPM)) { |
2589 | if (ata_id_has_hipm(dev->id)) | |
2590 | dev->flags |= ATA_DFLAG_HIPM; | |
2591 | if (ata_id_has_dipm(dev->id)) | |
2592 | dev->flags |= ATA_DFLAG_DIPM; | |
2593 | } | |
2594 | ||
c5038fc0 AC |
2595 | /* Limit PATA drive on SATA cable bridge transfers to udma5, |
2596 | 200 sectors */ | |
3373efd8 | 2597 | if (ata_dev_knobble(dev)) { |
5afc8142 | 2598 | if (ata_msg_drv(ap) && print_info) |
f15a1daf TH |
2599 | ata_dev_printk(dev, KERN_INFO, |
2600 | "applying bridge limits\n"); | |
5a529139 | 2601 | dev->udma_mask &= ATA_UDMA5; |
4b2f3ede TH |
2602 | dev->max_sectors = ATA_MAX_SECTORS; |
2603 | } | |
2604 | ||
f8d8e579 | 2605 | if ((dev->class == ATA_DEV_ATAPI) && |
f442cd86 | 2606 | (atapi_command_packet_set(id) == TYPE_TAPE)) { |
f8d8e579 | 2607 | dev->max_sectors = ATA_MAX_SECTORS_TAPE; |
f442cd86 AL |
2608 | dev->horkage |= ATA_HORKAGE_STUCK_ERR; |
2609 | } | |
f8d8e579 | 2610 | |
75683fe7 | 2611 | if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) |
03ec52de TH |
2612 | dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, |
2613 | dev->max_sectors); | |
18d6e9d5 | 2614 | |
ca77329f KCA |
2615 | if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) { |
2616 | dev->horkage |= ATA_HORKAGE_IPM; | |
2617 | ||
2618 | /* reset link pm_policy for this port to no pm */ | |
2619 | ap->pm_policy = MAX_PERFORMANCE; | |
2620 | } | |
2621 | ||
4b2f3ede | 2622 | if (ap->ops->dev_config) |
cd0d3bbc | 2623 | ap->ops->dev_config(dev); |
4b2f3ede | 2624 | |
c5038fc0 AC |
2625 | if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { |
2626 | /* Let the user know. We don't want to disallow opens for | |
2627 | rescue purposes, or in case the vendor is just a blithering | |
2628 | idiot. Do this after the dev_config call as some controllers | |
2629 | with buggy firmware may want to avoid reporting false device | |
2630 | bugs */ | |
2631 | ||
2632 | if (print_info) { | |
2633 | ata_dev_printk(dev, KERN_WARNING, | |
2634 | "Drive reports diagnostics failure. This may indicate a drive\n"); | |
2635 | ata_dev_printk(dev, KERN_WARNING, | |
2636 | "fault or invalid emulation. Contact drive vendor for information.\n"); | |
2637 | } | |
2638 | } | |
2639 | ||
ac70a964 TH |
2640 | if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) { |
2641 | ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires " | |
2642 | "firmware update to be fully functional.\n"); | |
2643 | ata_dev_printk(dev, KERN_WARNING, " contact the vendor " | |
2644 | "or visit http://ata.wiki.kernel.org.\n"); | |
2645 | } | |
2646 | ||
ffeae418 | 2647 | return 0; |
1da177e4 LT |
2648 | |
2649 | err_out_nosup: | |
0dd4b21f | 2650 | if (ata_msg_probe(ap)) |
88574551 | 2651 | ata_dev_printk(dev, KERN_DEBUG, |
7f5e4e8d | 2652 | "%s: EXIT, err\n", __func__); |
ffeae418 | 2653 | return rc; |
1da177e4 LT |
2654 | } |
2655 | ||
be0d18df | 2656 | /** |
2e41e8e6 | 2657 | * ata_cable_40wire - return 40 wire cable type |
be0d18df AC |
2658 | * @ap: port |
2659 | * | |
2e41e8e6 | 2660 | * Helper method for drivers which want to hardwire 40 wire cable |
be0d18df AC |
2661 | * detection. |
2662 | */ | |
2663 | ||
2664 | int ata_cable_40wire(struct ata_port *ap) | |
2665 | { | |
2666 | return ATA_CBL_PATA40; | |
2667 | } | |
2668 | ||
2669 | /** | |
2e41e8e6 | 2670 | * ata_cable_80wire - return 80 wire cable type |
be0d18df AC |
2671 | * @ap: port |
2672 | * | |
2e41e8e6 | 2673 | * Helper method for drivers which want to hardwire 80 wire cable |
be0d18df AC |
2674 | * detection. |
2675 | */ | |
2676 | ||
2677 | int ata_cable_80wire(struct ata_port *ap) | |
2678 | { | |
2679 | return ATA_CBL_PATA80; | |
2680 | } | |
2681 | ||
2682 | /** | |
2683 | * ata_cable_unknown - return unknown PATA cable. | |
2684 | * @ap: port | |
2685 | * | |
2686 | * Helper method for drivers which have no PATA cable detection. | |
2687 | */ | |
2688 | ||
2689 | int ata_cable_unknown(struct ata_port *ap) | |
2690 | { | |
2691 | return ATA_CBL_PATA_UNK; | |
2692 | } | |
2693 | ||
c88f90c3 TH |
2694 | /** |
2695 | * ata_cable_ignore - return ignored PATA cable. | |
2696 | * @ap: port | |
2697 | * | |
2698 | * Helper method for drivers which don't use cable type to limit | |
2699 | * transfer mode. | |
2700 | */ | |
2701 | int ata_cable_ignore(struct ata_port *ap) | |
2702 | { | |
2703 | return ATA_CBL_PATA_IGN; | |
2704 | } | |
2705 | ||
be0d18df AC |
2706 | /** |
2707 | * ata_cable_sata - return SATA cable type | |
2708 | * @ap: port | |
2709 | * | |
2710 | * Helper method for drivers which have SATA cables | |
2711 | */ | |
2712 | ||
2713 | int ata_cable_sata(struct ata_port *ap) | |
2714 | { | |
2715 | return ATA_CBL_SATA; | |
2716 | } | |
2717 | ||
1da177e4 LT |
2718 | /** |
2719 | * ata_bus_probe - Reset and probe ATA bus | |
2720 | * @ap: Bus to probe | |
2721 | * | |
0cba632b JG |
2722 | * Master ATA bus probing function. Initiates a hardware-dependent |
2723 | * bus reset, then attempts to identify any devices found on | |
2724 | * the bus. | |
2725 | * | |
1da177e4 | 2726 | * LOCKING: |
0cba632b | 2727 | * PCI/etc. bus probe sem. |
1da177e4 LT |
2728 | * |
2729 | * RETURNS: | |
96072e69 | 2730 | * Zero on success, negative errno otherwise. |
1da177e4 LT |
2731 | */ |
2732 | ||
80289167 | 2733 | int ata_bus_probe(struct ata_port *ap) |
1da177e4 | 2734 | { |
28ca5c57 | 2735 | unsigned int classes[ATA_MAX_DEVICES]; |
14d2bac1 | 2736 | int tries[ATA_MAX_DEVICES]; |
f58229f8 | 2737 | int rc; |
e82cbdb9 | 2738 | struct ata_device *dev; |
1da177e4 | 2739 | |
28ca5c57 | 2740 | ata_port_probe(ap); |
c19ba8af | 2741 | |
1eca4365 | 2742 | ata_for_each_dev(dev, &ap->link, ALL) |
f58229f8 | 2743 | tries[dev->devno] = ATA_PROBE_MAX_TRIES; |
14d2bac1 TH |
2744 | |
2745 | retry: | |
1eca4365 | 2746 | ata_for_each_dev(dev, &ap->link, ALL) { |
cdeab114 TH |
2747 | /* If we issue an SRST then an ATA drive (not ATAPI) |
2748 | * may change configuration and be in PIO0 timing. If | |
2749 | * we do a hard reset (or are coming from power on) | |
2750 | * this is true for ATA or ATAPI. Until we've set a | |
2751 | * suitable controller mode we should not touch the | |
2752 | * bus as we may be talking too fast. | |
2753 | */ | |
2754 | dev->pio_mode = XFER_PIO_0; | |
2755 | ||
2756 | /* If the controller has a pio mode setup function | |
2757 | * then use it to set the chipset to rights. Don't | |
2758 | * touch the DMA setup as that will be dealt with when | |
2759 | * configuring devices. | |
2760 | */ | |
2761 | if (ap->ops->set_piomode) | |
2762 | ap->ops->set_piomode(ap, dev); | |
2763 | } | |
2764 | ||
2044470c | 2765 | /* reset and determine device classes */ |
52783c5d | 2766 | ap->ops->phy_reset(ap); |
2061a47a | 2767 | |
1eca4365 | 2768 | ata_for_each_dev(dev, &ap->link, ALL) { |
52783c5d TH |
2769 | if (!(ap->flags & ATA_FLAG_DISABLED) && |
2770 | dev->class != ATA_DEV_UNKNOWN) | |
2771 | classes[dev->devno] = dev->class; | |
2772 | else | |
2773 | classes[dev->devno] = ATA_DEV_NONE; | |
2044470c | 2774 | |
52783c5d | 2775 | dev->class = ATA_DEV_UNKNOWN; |
28ca5c57 | 2776 | } |
1da177e4 | 2777 | |
52783c5d | 2778 | ata_port_probe(ap); |
2044470c | 2779 | |
f31f0cc2 JG |
2780 | /* read IDENTIFY page and configure devices. We have to do the identify |
2781 | specific sequence bass-ackwards so that PDIAG- is released by | |
2782 | the slave device */ | |
2783 | ||
1eca4365 | 2784 | ata_for_each_dev(dev, &ap->link, ALL_REVERSE) { |
f58229f8 TH |
2785 | if (tries[dev->devno]) |
2786 | dev->class = classes[dev->devno]; | |
ffeae418 | 2787 | |
14d2bac1 | 2788 | if (!ata_dev_enabled(dev)) |
ffeae418 | 2789 | continue; |
ffeae418 | 2790 | |
bff04647 TH |
2791 | rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET, |
2792 | dev->id); | |
14d2bac1 TH |
2793 | if (rc) |
2794 | goto fail; | |
f31f0cc2 JG |
2795 | } |
2796 | ||
be0d18df AC |
2797 | /* Now ask for the cable type as PDIAG- should have been released */ |
2798 | if (ap->ops->cable_detect) | |
2799 | ap->cbl = ap->ops->cable_detect(ap); | |
2800 | ||
1eca4365 TH |
2801 | /* We may have SATA bridge glue hiding here irrespective of |
2802 | * the reported cable types and sensed types. When SATA | |
2803 | * drives indicate we have a bridge, we don't know which end | |
2804 | * of the link the bridge is which is a problem. | |
2805 | */ | |
2806 | ata_for_each_dev(dev, &ap->link, ENABLED) | |
614fe29b AC |
2807 | if (ata_id_is_sata(dev->id)) |
2808 | ap->cbl = ATA_CBL_SATA; | |
614fe29b | 2809 | |
f31f0cc2 JG |
2810 | /* After the identify sequence we can now set up the devices. We do |
2811 | this in the normal order so that the user doesn't get confused */ | |
2812 | ||
1eca4365 | 2813 | ata_for_each_dev(dev, &ap->link, ENABLED) { |
9af5c9c9 | 2814 | ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO; |
efdaedc4 | 2815 | rc = ata_dev_configure(dev); |
9af5c9c9 | 2816 | ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO; |
14d2bac1 TH |
2817 | if (rc) |
2818 | goto fail; | |
1da177e4 LT |
2819 | } |
2820 | ||
e82cbdb9 | 2821 | /* configure transfer mode */ |
0260731f | 2822 | rc = ata_set_mode(&ap->link, &dev); |
4ae72a1e | 2823 | if (rc) |
51713d35 | 2824 | goto fail; |
1da177e4 | 2825 | |
1eca4365 TH |
2826 | ata_for_each_dev(dev, &ap->link, ENABLED) |
2827 | return 0; | |
1da177e4 | 2828 | |
e82cbdb9 TH |
2829 | /* no device present, disable port */ |
2830 | ata_port_disable(ap); | |
96072e69 | 2831 | return -ENODEV; |
14d2bac1 TH |
2832 | |
2833 | fail: | |
4ae72a1e TH |
2834 | tries[dev->devno]--; |
2835 | ||
14d2bac1 TH |
2836 | switch (rc) { |
2837 | case -EINVAL: | |
4ae72a1e | 2838 | /* eeek, something went very wrong, give up */ |
14d2bac1 TH |
2839 | tries[dev->devno] = 0; |
2840 | break; | |
4ae72a1e TH |
2841 | |
2842 | case -ENODEV: | |
2843 | /* give it just one more chance */ | |
2844 | tries[dev->devno] = min(tries[dev->devno], 1); | |
14d2bac1 | 2845 | case -EIO: |
4ae72a1e TH |
2846 | if (tries[dev->devno] == 1) { |
2847 | /* This is the last chance, better to slow | |
2848 | * down than lose it. | |
2849 | */ | |
a07d499b | 2850 | sata_down_spd_limit(&ap->link, 0); |
4ae72a1e TH |
2851 | ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); |
2852 | } | |
14d2bac1 TH |
2853 | } |
2854 | ||
4ae72a1e | 2855 | if (!tries[dev->devno]) |
3373efd8 | 2856 | ata_dev_disable(dev); |
ec573755 | 2857 | |
14d2bac1 | 2858 | goto retry; |
1da177e4 LT |
2859 | } |
2860 | ||
2861 | /** | |
0cba632b JG |
2862 | * ata_port_probe - Mark port as enabled |
2863 | * @ap: Port for which we indicate enablement | |
1da177e4 | 2864 | * |
0cba632b JG |
2865 | * Modify @ap data structure such that the system |
2866 | * thinks that the entire port is enabled. | |
2867 | * | |
cca3974e | 2868 | * LOCKING: host lock, or some other form of |
0cba632b | 2869 | * serialization. |
1da177e4 LT |
2870 | */ |
2871 | ||
2872 | void ata_port_probe(struct ata_port *ap) | |
2873 | { | |
198e0fed | 2874 | ap->flags &= ~ATA_FLAG_DISABLED; |
1da177e4 LT |
2875 | } |
2876 | ||
3be680b7 TH |
2877 | /** |
2878 | * sata_print_link_status - Print SATA link status | |
936fd732 | 2879 | * @link: SATA link to printk link status about |
3be680b7 TH |
2880 | * |
2881 | * This function prints link speed and status of a SATA link. | |
2882 | * | |
2883 | * LOCKING: | |
2884 | * None. | |
2885 | */ | |
6bdb4fc9 | 2886 | static void sata_print_link_status(struct ata_link *link) |
3be680b7 | 2887 | { |
6d5f9732 | 2888 | u32 sstatus, scontrol, tmp; |
3be680b7 | 2889 | |
936fd732 | 2890 | if (sata_scr_read(link, SCR_STATUS, &sstatus)) |
3be680b7 | 2891 | return; |
936fd732 | 2892 | sata_scr_read(link, SCR_CONTROL, &scontrol); |
3be680b7 | 2893 | |
b1c72916 | 2894 | if (ata_phys_link_online(link)) { |
3be680b7 | 2895 | tmp = (sstatus >> 4) & 0xf; |
936fd732 | 2896 | ata_link_printk(link, KERN_INFO, |
f15a1daf TH |
2897 | "SATA link up %s (SStatus %X SControl %X)\n", |
2898 | sata_spd_string(tmp), sstatus, scontrol); | |
3be680b7 | 2899 | } else { |
936fd732 | 2900 | ata_link_printk(link, KERN_INFO, |
f15a1daf TH |
2901 | "SATA link down (SStatus %X SControl %X)\n", |
2902 | sstatus, scontrol); | |
3be680b7 TH |
2903 | } |
2904 | } | |
2905 | ||
ebdfca6e AC |
2906 | /** |
2907 | * ata_dev_pair - return other device on cable | |
ebdfca6e AC |
2908 | * @adev: device |
2909 | * | |
2910 | * Obtain the other device on the same cable, or if none is | |
2911 | * present NULL is returned | |
2912 | */ | |
2e9edbf8 | 2913 | |
3373efd8 | 2914 | struct ata_device *ata_dev_pair(struct ata_device *adev) |
ebdfca6e | 2915 | { |
9af5c9c9 TH |
2916 | struct ata_link *link = adev->link; |
2917 | struct ata_device *pair = &link->device[1 - adev->devno]; | |
e1211e3f | 2918 | if (!ata_dev_enabled(pair)) |
ebdfca6e AC |
2919 | return NULL; |
2920 | return pair; | |
2921 | } | |
2922 | ||
1da177e4 | 2923 | /** |
780a87f7 JG |
2924 | * ata_port_disable - Disable port. |
2925 | * @ap: Port to be disabled. | |
1da177e4 | 2926 | * |
780a87f7 JG |
2927 | * Modify @ap data structure such that the system |
2928 | * thinks that the entire port is disabled, and should | |
2929 | * never attempt to probe or communicate with devices | |
2930 | * on this port. | |
2931 | * | |
cca3974e | 2932 | * LOCKING: host lock, or some other form of |
780a87f7 | 2933 | * serialization. |
1da177e4 LT |
2934 | */ |
2935 | ||
2936 | void ata_port_disable(struct ata_port *ap) | |
2937 | { | |
9af5c9c9 TH |
2938 | ap->link.device[0].class = ATA_DEV_NONE; |
2939 | ap->link.device[1].class = ATA_DEV_NONE; | |
198e0fed | 2940 | ap->flags |= ATA_FLAG_DISABLED; |
1da177e4 LT |
2941 | } |
2942 | ||
1c3fae4d | 2943 | /** |
3c567b7d | 2944 | * sata_down_spd_limit - adjust SATA spd limit downward |
936fd732 | 2945 | * @link: Link to adjust SATA spd limit for |
a07d499b | 2946 | * @spd_limit: Additional limit |
1c3fae4d | 2947 | * |
936fd732 | 2948 | * Adjust SATA spd limit of @link downward. Note that this |
1c3fae4d | 2949 | * function only adjusts the limit. The change must be applied |
3c567b7d | 2950 | * using sata_set_spd(). |
1c3fae4d | 2951 | * |
a07d499b TH |
2952 | * If @spd_limit is non-zero, the speed is limited to equal to or |
2953 | * lower than @spd_limit if such speed is supported. If | |
2954 | * @spd_limit is slower than any supported speed, only the lowest | |
2955 | * supported speed is allowed. | |
2956 | * | |
1c3fae4d TH |
2957 | * LOCKING: |
2958 | * Inherited from caller. | |
2959 | * | |
2960 | * RETURNS: | |
2961 | * 0 on success, negative errno on failure | |
2962 | */ | |
a07d499b | 2963 | int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) |
1c3fae4d | 2964 | { |
81952c54 | 2965 | u32 sstatus, spd, mask; |
a07d499b | 2966 | int rc, bit; |
1c3fae4d | 2967 | |
936fd732 | 2968 | if (!sata_scr_valid(link)) |
008a7896 TH |
2969 | return -EOPNOTSUPP; |
2970 | ||
2971 | /* If SCR can be read, use it to determine the current SPD. | |
936fd732 | 2972 | * If not, use cached value in link->sata_spd. |
008a7896 | 2973 | */ |
936fd732 | 2974 | rc = sata_scr_read(link, SCR_STATUS, &sstatus); |
9913ff8a | 2975 | if (rc == 0 && ata_sstatus_online(sstatus)) |
008a7896 TH |
2976 | spd = (sstatus >> 4) & 0xf; |
2977 | else | |
936fd732 | 2978 | spd = link->sata_spd; |
1c3fae4d | 2979 | |
936fd732 | 2980 | mask = link->sata_spd_limit; |
1c3fae4d TH |
2981 | if (mask <= 1) |
2982 | return -EINVAL; | |
008a7896 TH |
2983 | |
2984 | /* unconditionally mask off the highest bit */ | |
a07d499b TH |
2985 | bit = fls(mask) - 1; |
2986 | mask &= ~(1 << bit); | |
1c3fae4d | 2987 | |
008a7896 TH |
2988 | /* Mask off all speeds higher than or equal to the current |
2989 | * one. Force 1.5Gbps if current SPD is not available. | |
2990 | */ | |
2991 | if (spd > 1) | |
2992 | mask &= (1 << (spd - 1)) - 1; | |
2993 | else | |
2994 | mask &= 1; | |
2995 | ||
2996 | /* were we already at the bottom? */ | |
1c3fae4d TH |
2997 | if (!mask) |
2998 | return -EINVAL; | |
2999 | ||
a07d499b TH |
3000 | if (spd_limit) { |
3001 | if (mask & ((1 << spd_limit) - 1)) | |
3002 | mask &= (1 << spd_limit) - 1; | |
3003 | else { | |
3004 | bit = ffs(mask) - 1; | |
3005 | mask = 1 << bit; | |
3006 | } | |
3007 | } | |
3008 | ||
936fd732 | 3009 | link->sata_spd_limit = mask; |
1c3fae4d | 3010 | |
936fd732 | 3011 | ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", |
f15a1daf | 3012 | sata_spd_string(fls(mask))); |
1c3fae4d TH |
3013 | |
3014 | return 0; | |
3015 | } | |
3016 | ||
936fd732 | 3017 | static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) |
1c3fae4d | 3018 | { |
5270222f TH |
3019 | struct ata_link *host_link = &link->ap->link; |
3020 | u32 limit, target, spd; | |
1c3fae4d | 3021 | |
5270222f TH |
3022 | limit = link->sata_spd_limit; |
3023 | ||
3024 | /* Don't configure downstream link faster than upstream link. | |
3025 | * It doesn't speed up anything and some PMPs choke on such | |
3026 | * configuration. | |
3027 | */ | |
3028 | if (!ata_is_host_link(link) && host_link->sata_spd) | |
3029 | limit &= (1 << host_link->sata_spd) - 1; | |
3030 | ||
3031 | if (limit == UINT_MAX) | |
3032 | target = 0; | |
1c3fae4d | 3033 | else |
5270222f | 3034 | target = fls(limit); |
1c3fae4d TH |
3035 | |
3036 | spd = (*scontrol >> 4) & 0xf; | |
5270222f | 3037 | *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4); |
1c3fae4d | 3038 | |
5270222f | 3039 | return spd != target; |
1c3fae4d TH |
3040 | } |
3041 | ||
3042 | /** | |
3c567b7d | 3043 | * sata_set_spd_needed - is SATA spd configuration needed |
936fd732 | 3044 | * @link: Link in question |
1c3fae4d TH |
3045 | * |
3046 | * Test whether the spd limit in SControl matches | |
936fd732 | 3047 | * @link->sata_spd_limit. This function is used to determine |
1c3fae4d TH |
3048 | * whether hardreset is necessary to apply SATA spd |
3049 | * configuration. | |
3050 | * | |
3051 | * LOCKING: | |
3052 | * Inherited from caller. | |
3053 | * | |
3054 | * RETURNS: | |
3055 | * 1 if SATA spd configuration is needed, 0 otherwise. | |
3056 | */ | |
1dc55e87 | 3057 | static int sata_set_spd_needed(struct ata_link *link) |
1c3fae4d TH |
3058 | { |
3059 | u32 scontrol; | |
3060 | ||
936fd732 | 3061 | if (sata_scr_read(link, SCR_CONTROL, &scontrol)) |
db64bcf3 | 3062 | return 1; |
1c3fae4d | 3063 | |
936fd732 | 3064 | return __sata_set_spd_needed(link, &scontrol); |
1c3fae4d TH |
3065 | } |
3066 | ||
3067 | /** | |
3c567b7d | 3068 | * sata_set_spd - set SATA spd according to spd limit |
936fd732 | 3069 | * @link: Link to set SATA spd for |
1c3fae4d | 3070 | * |
936fd732 | 3071 | * Set SATA spd of @link according to sata_spd_limit. |
1c3fae4d TH |
3072 | * |
3073 | * LOCKING: | |
3074 | * Inherited from caller. | |
3075 | * | |
3076 | * RETURNS: | |
3077 | * 0 if spd doesn't need to be changed, 1 if spd has been | |
81952c54 | 3078 | * changed. Negative errno if SCR registers are inaccessible. |
1c3fae4d | 3079 | */ |
936fd732 | 3080 | int sata_set_spd(struct ata_link *link) |
1c3fae4d TH |
3081 | { |
3082 | u32 scontrol; | |
81952c54 | 3083 | int rc; |
1c3fae4d | 3084 | |
936fd732 | 3085 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
81952c54 | 3086 | return rc; |
1c3fae4d | 3087 | |
936fd732 | 3088 | if (!__sata_set_spd_needed(link, &scontrol)) |
1c3fae4d TH |
3089 | return 0; |
3090 | ||
936fd732 | 3091 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
81952c54 TH |
3092 | return rc; |
3093 | ||
1c3fae4d TH |
3094 | return 1; |
3095 | } | |
3096 | ||
452503f9 AC |
3097 | /* |
3098 | * This mode timing computation functionality is ported over from | |
3099 | * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik | |
3100 | */ | |
3101 | /* | |
b352e57d | 3102 | * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). |
452503f9 | 3103 | * These were taken from ATA/ATAPI-6 standard, rev 0a, except |
b352e57d AC |
3104 | * for UDMA6, which is currently supported only by Maxtor drives. |
3105 | * | |
3106 | * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0. | |
452503f9 AC |
3107 | */ |
3108 | ||
3109 | static const struct ata_timing ata_timing[] = { | |
3ada9c12 DD |
3110 | /* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */ |
3111 | { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 }, | |
3112 | { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 }, | |
3113 | { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 }, | |
3114 | { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 }, | |
3115 | { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 }, | |
3116 | { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 }, | |
3117 | { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 }, | |
3118 | ||
3119 | { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 }, | |
3120 | { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 }, | |
3121 | { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 }, | |
3122 | ||
3123 | { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 }, | |
3124 | { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 }, | |
3125 | { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 }, | |
3126 | { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 }, | |
3127 | { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 }, | |
3128 | ||
3129 | /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */ | |
3130 | { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 }, | |
3131 | { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 }, | |
3132 | { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 }, | |
3133 | { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 }, | |
3134 | { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 }, | |
3135 | { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 }, | |
3136 | { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 }, | |
452503f9 AC |
3137 | |
3138 | { 0xFF } | |
3139 | }; | |
3140 | ||
2dcb407e JG |
3141 | #define ENOUGH(v, unit) (((v)-1)/(unit)+1) |
3142 | #define EZ(v, unit) ((v)?ENOUGH(v, unit):0) | |
452503f9 AC |
3143 | |
3144 | static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) | |
3145 | { | |
3ada9c12 DD |
3146 | q->setup = EZ(t->setup * 1000, T); |
3147 | q->act8b = EZ(t->act8b * 1000, T); | |
3148 | q->rec8b = EZ(t->rec8b * 1000, T); | |
3149 | q->cyc8b = EZ(t->cyc8b * 1000, T); | |
3150 | q->active = EZ(t->active * 1000, T); | |
3151 | q->recover = EZ(t->recover * 1000, T); | |
3152 | q->dmack_hold = EZ(t->dmack_hold * 1000, T); | |
3153 | q->cycle = EZ(t->cycle * 1000, T); | |
3154 | q->udma = EZ(t->udma * 1000, UT); | |
452503f9 AC |
3155 | } |
3156 | ||
3157 | void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, | |
3158 | struct ata_timing *m, unsigned int what) | |
3159 | { | |
3160 | if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); | |
3161 | if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); | |
3162 | if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); | |
3163 | if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); | |
3164 | if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); | |
3165 | if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); | |
3ada9c12 | 3166 | if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold); |
452503f9 AC |
3167 | if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); |
3168 | if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); | |
3169 | } | |
3170 | ||
6357357c | 3171 | const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) |
452503f9 | 3172 | { |
70cd071e TH |
3173 | const struct ata_timing *t = ata_timing; |
3174 | ||
3175 | while (xfer_mode > t->mode) | |
3176 | t++; | |
452503f9 | 3177 | |
70cd071e TH |
3178 | if (xfer_mode == t->mode) |
3179 | return t; | |
3180 | return NULL; | |
452503f9 AC |
3181 | } |
3182 | ||
3183 | int ata_timing_compute(struct ata_device *adev, unsigned short speed, | |
3184 | struct ata_timing *t, int T, int UT) | |
3185 | { | |
3186 | const struct ata_timing *s; | |
3187 | struct ata_timing p; | |
3188 | ||
3189 | /* | |
2e9edbf8 | 3190 | * Find the mode. |
75b1f2f8 | 3191 | */ |
452503f9 AC |
3192 | |
3193 | if (!(s = ata_timing_find_mode(speed))) | |
3194 | return -EINVAL; | |
3195 | ||
75b1f2f8 AL |
3196 | memcpy(t, s, sizeof(*s)); |
3197 | ||
452503f9 AC |
3198 | /* |
3199 | * If the drive is an EIDE drive, it can tell us it needs extended | |
3200 | * PIO/MW_DMA cycle timing. | |
3201 | */ | |
3202 | ||
3203 | if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ | |
3204 | memset(&p, 0, sizeof(p)); | |
2dcb407e | 3205 | if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { |
452503f9 AC |
3206 | if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; |
3207 | else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; | |
2dcb407e | 3208 | } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { |
452503f9 AC |
3209 | p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; |
3210 | } | |
3211 | ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); | |
3212 | } | |
3213 | ||
3214 | /* | |
3215 | * Convert the timing to bus clock counts. | |
3216 | */ | |
3217 | ||
75b1f2f8 | 3218 | ata_timing_quantize(t, t, T, UT); |
452503f9 AC |
3219 | |
3220 | /* | |
c893a3ae RD |
3221 | * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, |
3222 | * S.M.A.R.T * and some other commands. We have to ensure that the | |
3223 | * DMA cycle timing is slower/equal than the fastest PIO timing. | |
452503f9 AC |
3224 | */ |
3225 | ||
fd3367af | 3226 | if (speed > XFER_PIO_6) { |
452503f9 AC |
3227 | ata_timing_compute(adev, adev->pio_mode, &p, T, UT); |
3228 | ata_timing_merge(&p, t, t, ATA_TIMING_ALL); | |
3229 | } | |
3230 | ||
3231 | /* | |
c893a3ae | 3232 | * Lengthen active & recovery time so that cycle time is correct. |
452503f9 AC |
3233 | */ |
3234 | ||
3235 | if (t->act8b + t->rec8b < t->cyc8b) { | |
3236 | t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; | |
3237 | t->rec8b = t->cyc8b - t->act8b; | |
3238 | } | |
3239 | ||
3240 | if (t->active + t->recover < t->cycle) { | |
3241 | t->active += (t->cycle - (t->active + t->recover)) / 2; | |
3242 | t->recover = t->cycle - t->active; | |
3243 | } | |
a617c09f | 3244 | |
4f701d1e AC |
3245 | /* In a few cases quantisation may produce enough errors to |
3246 | leave t->cycle too low for the sum of active and recovery | |
3247 | if so we must correct this */ | |
3248 | if (t->active + t->recover > t->cycle) | |
3249 | t->cycle = t->active + t->recover; | |
452503f9 AC |
3250 | |
3251 | return 0; | |
3252 | } | |
3253 | ||
a0f79b92 TH |
3254 | /** |
3255 | * ata_timing_cycle2mode - find xfer mode for the specified cycle duration | |
3256 | * @xfer_shift: ATA_SHIFT_* value for transfer type to examine. | |
3257 | * @cycle: cycle duration in ns | |
3258 | * | |
3259 | * Return matching xfer mode for @cycle. The returned mode is of | |
3260 | * the transfer type specified by @xfer_shift. If @cycle is too | |
3261 | * slow for @xfer_shift, 0xff is returned. If @cycle is faster | |
3262 | * than the fastest known mode, the fasted mode is returned. | |
3263 | * | |
3264 | * LOCKING: | |
3265 | * None. | |
3266 | * | |
3267 | * RETURNS: | |
3268 | * Matching xfer_mode, 0xff if no match found. | |
3269 | */ | |
3270 | u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle) | |
3271 | { | |
3272 | u8 base_mode = 0xff, last_mode = 0xff; | |
3273 | const struct ata_xfer_ent *ent; | |
3274 | const struct ata_timing *t; | |
3275 | ||
3276 | for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) | |
3277 | if (ent->shift == xfer_shift) | |
3278 | base_mode = ent->base; | |
3279 | ||
3280 | for (t = ata_timing_find_mode(base_mode); | |
3281 | t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) { | |
3282 | unsigned short this_cycle; | |
3283 | ||
3284 | switch (xfer_shift) { | |
3285 | case ATA_SHIFT_PIO: | |
3286 | case ATA_SHIFT_MWDMA: | |
3287 | this_cycle = t->cycle; | |
3288 | break; | |
3289 | case ATA_SHIFT_UDMA: | |
3290 | this_cycle = t->udma; | |
3291 | break; | |
3292 | default: | |
3293 | return 0xff; | |
3294 | } | |
3295 | ||
3296 | if (cycle > this_cycle) | |
3297 | break; | |
3298 | ||
3299 | last_mode = t->mode; | |
3300 | } | |
3301 | ||
3302 | return last_mode; | |
3303 | } | |
3304 | ||
cf176e1a TH |
3305 | /** |
3306 | * ata_down_xfermask_limit - adjust dev xfer masks downward | |
cf176e1a | 3307 | * @dev: Device to adjust xfer masks |
458337db | 3308 | * @sel: ATA_DNXFER_* selector |
cf176e1a TH |
3309 | * |
3310 | * Adjust xfer masks of @dev downward. Note that this function | |
3311 | * does not apply the change. Invoking ata_set_mode() afterwards | |
3312 | * will apply the limit. | |
3313 | * | |
3314 | * LOCKING: | |
3315 | * Inherited from caller. | |
3316 | * | |
3317 | * RETURNS: | |
3318 | * 0 on success, negative errno on failure | |
3319 | */ | |
458337db | 3320 | int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) |
cf176e1a | 3321 | { |
458337db | 3322 | char buf[32]; |
7dc951ae TH |
3323 | unsigned long orig_mask, xfer_mask; |
3324 | unsigned long pio_mask, mwdma_mask, udma_mask; | |
458337db | 3325 | int quiet, highbit; |
cf176e1a | 3326 | |
458337db TH |
3327 | quiet = !!(sel & ATA_DNXFER_QUIET); |
3328 | sel &= ~ATA_DNXFER_QUIET; | |
cf176e1a | 3329 | |
458337db TH |
3330 | xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask, |
3331 | dev->mwdma_mask, | |
3332 | dev->udma_mask); | |
3333 | ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask); | |
cf176e1a | 3334 | |
458337db TH |
3335 | switch (sel) { |
3336 | case ATA_DNXFER_PIO: | |
3337 | highbit = fls(pio_mask) - 1; | |
3338 | pio_mask &= ~(1 << highbit); | |
3339 | break; | |
3340 | ||
3341 | case ATA_DNXFER_DMA: | |
3342 | if (udma_mask) { | |
3343 | highbit = fls(udma_mask) - 1; | |
3344 | udma_mask &= ~(1 << highbit); | |
3345 | if (!udma_mask) | |
3346 | return -ENOENT; | |
3347 | } else if (mwdma_mask) { | |
3348 | highbit = fls(mwdma_mask) - 1; | |
3349 | mwdma_mask &= ~(1 << highbit); | |
3350 | if (!mwdma_mask) | |
3351 | return -ENOENT; | |
3352 | } | |
3353 | break; | |
3354 | ||
3355 | case ATA_DNXFER_40C: | |
3356 | udma_mask &= ATA_UDMA_MASK_40C; | |
3357 | break; | |
3358 | ||
3359 | case ATA_DNXFER_FORCE_PIO0: | |
3360 | pio_mask &= 1; | |
3361 | case ATA_DNXFER_FORCE_PIO: | |
3362 | mwdma_mask = 0; | |
3363 | udma_mask = 0; | |
3364 | break; | |
3365 | ||
458337db TH |
3366 | default: |
3367 | BUG(); | |
3368 | } | |
3369 | ||
3370 | xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); | |
3371 | ||
3372 | if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask) | |
3373 | return -ENOENT; | |
3374 | ||
3375 | if (!quiet) { | |
3376 | if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) | |
3377 | snprintf(buf, sizeof(buf), "%s:%s", | |
3378 | ata_mode_string(xfer_mask), | |
3379 | ata_mode_string(xfer_mask & ATA_MASK_PIO)); | |
3380 | else | |
3381 | snprintf(buf, sizeof(buf), "%s", | |
3382 | ata_mode_string(xfer_mask)); | |
3383 | ||
3384 | ata_dev_printk(dev, KERN_WARNING, | |
3385 | "limiting speed to %s\n", buf); | |
3386 | } | |
cf176e1a TH |
3387 | |
3388 | ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, | |
3389 | &dev->udma_mask); | |
3390 | ||
cf176e1a | 3391 | return 0; |
cf176e1a TH |
3392 | } |
3393 | ||
3373efd8 | 3394 | static int ata_dev_set_mode(struct ata_device *dev) |
1da177e4 | 3395 | { |
d0cb43b3 | 3396 | struct ata_port *ap = dev->link->ap; |
9af5c9c9 | 3397 | struct ata_eh_context *ehc = &dev->link->eh_context; |
d0cb43b3 | 3398 | const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER; |
4055dee7 TH |
3399 | const char *dev_err_whine = ""; |
3400 | int ign_dev_err = 0; | |
d0cb43b3 | 3401 | unsigned int err_mask = 0; |
83206a29 | 3402 | int rc; |
1da177e4 | 3403 | |
e8384607 | 3404 | dev->flags &= ~ATA_DFLAG_PIO; |
1da177e4 LT |
3405 | if (dev->xfer_shift == ATA_SHIFT_PIO) |
3406 | dev->flags |= ATA_DFLAG_PIO; | |
3407 | ||
d0cb43b3 TH |
3408 | if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id)) |
3409 | dev_err_whine = " (SET_XFERMODE skipped)"; | |
3410 | else { | |
3411 | if (nosetxfer) | |
3412 | ata_dev_printk(dev, KERN_WARNING, | |
3413 | "NOSETXFER but PATA detected - can't " | |
3414 | "skip SETXFER, might malfunction\n"); | |
3415 | err_mask = ata_dev_set_xfermode(dev); | |
3416 | } | |
2dcb407e | 3417 | |
4055dee7 TH |
3418 | if (err_mask & ~AC_ERR_DEV) |
3419 | goto fail; | |
3420 | ||
3421 | /* revalidate */ | |
3422 | ehc->i.flags |= ATA_EHI_POST_SETMODE; | |
3423 | rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0); | |
3424 | ehc->i.flags &= ~ATA_EHI_POST_SETMODE; | |
3425 | if (rc) | |
3426 | return rc; | |
3427 | ||
b93fda12 AC |
3428 | if (dev->xfer_shift == ATA_SHIFT_PIO) { |
3429 | /* Old CFA may refuse this command, which is just fine */ | |
3430 | if (ata_id_is_cfa(dev->id)) | |
3431 | ign_dev_err = 1; | |
3432 | /* Catch several broken garbage emulations plus some pre | |
3433 | ATA devices */ | |
3434 | if (ata_id_major_version(dev->id) == 0 && | |
3435 | dev->pio_mode <= XFER_PIO_2) | |
3436 | ign_dev_err = 1; | |
3437 | /* Some very old devices and some bad newer ones fail | |
3438 | any kind of SET_XFERMODE request but support PIO0-2 | |
3439 | timings and no IORDY */ | |
3440 | if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2) | |
3441 | ign_dev_err = 1; | |
3442 | } | |
3acaf94b AC |
3443 | /* Early MWDMA devices do DMA but don't allow DMA mode setting. |
3444 | Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ | |
c5038fc0 | 3445 | if (dev->xfer_shift == ATA_SHIFT_MWDMA && |
3acaf94b AC |
3446 | dev->dma_mode == XFER_MW_DMA_0 && |
3447 | (dev->id[63] >> 8) & 1) | |
4055dee7 | 3448 | ign_dev_err = 1; |
3acaf94b | 3449 | |
4055dee7 TH |
3450 | /* if the device is actually configured correctly, ignore dev err */ |
3451 | if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id))) | |
3452 | ign_dev_err = 1; | |
1da177e4 | 3453 | |
4055dee7 TH |
3454 | if (err_mask & AC_ERR_DEV) { |
3455 | if (!ign_dev_err) | |
3456 | goto fail; | |
3457 | else | |
3458 | dev_err_whine = " (device error ignored)"; | |
3459 | } | |
48a8a14f | 3460 | |
23e71c3d TH |
3461 | DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", |
3462 | dev->xfer_shift, (int)dev->xfer_mode); | |
1da177e4 | 3463 | |
4055dee7 TH |
3464 | ata_dev_printk(dev, KERN_INFO, "configured for %s%s\n", |
3465 | ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)), | |
3466 | dev_err_whine); | |
3467 | ||
83206a29 | 3468 | return 0; |
4055dee7 TH |
3469 | |
3470 | fail: | |
3471 | ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " | |
3472 | "(err_mask=0x%x)\n", err_mask); | |
3473 | return -EIO; | |
1da177e4 LT |
3474 | } |
3475 | ||
1da177e4 | 3476 | /** |
04351821 | 3477 | * ata_do_set_mode - Program timings and issue SET FEATURES - XFER |
0260731f | 3478 | * @link: link on which timings will be programmed |
1967b7ff | 3479 | * @r_failed_dev: out parameter for failed device |
1da177e4 | 3480 | * |
04351821 AC |
3481 | * Standard implementation of the function used to tune and set |
3482 | * ATA device disk transfer mode (PIO3, UDMA6, etc.). If | |
3483 | * ata_dev_set_mode() fails, pointer to the failing device is | |
e82cbdb9 | 3484 | * returned in @r_failed_dev. |
780a87f7 | 3485 | * |
1da177e4 | 3486 | * LOCKING: |
0cba632b | 3487 | * PCI/etc. bus probe sem. |
e82cbdb9 TH |
3488 | * |
3489 | * RETURNS: | |
3490 | * 0 on success, negative errno otherwise | |
1da177e4 | 3491 | */ |
04351821 | 3492 | |
0260731f | 3493 | int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) |
1da177e4 | 3494 | { |
0260731f | 3495 | struct ata_port *ap = link->ap; |
e8e0619f | 3496 | struct ata_device *dev; |
f58229f8 | 3497 | int rc = 0, used_dma = 0, found = 0; |
3adcebb2 | 3498 | |
a6d5a51c | 3499 | /* step 1: calculate xfer_mask */ |
1eca4365 | 3500 | ata_for_each_dev(dev, link, ENABLED) { |
7dc951ae | 3501 | unsigned long pio_mask, dma_mask; |
b3a70601 | 3502 | unsigned int mode_mask; |
a6d5a51c | 3503 | |
b3a70601 AC |
3504 | mode_mask = ATA_DMA_MASK_ATA; |
3505 | if (dev->class == ATA_DEV_ATAPI) | |
3506 | mode_mask = ATA_DMA_MASK_ATAPI; | |
3507 | else if (ata_id_is_cfa(dev->id)) | |
3508 | mode_mask = ATA_DMA_MASK_CFA; | |
3509 | ||
3373efd8 | 3510 | ata_dev_xfermask(dev); |
33267325 | 3511 | ata_force_xfermask(dev); |
1da177e4 | 3512 | |
acf356b1 TH |
3513 | pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); |
3514 | dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); | |
b3a70601 AC |
3515 | |
3516 | if (libata_dma_mask & mode_mask) | |
3517 | dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); | |
3518 | else | |
3519 | dma_mask = 0; | |
3520 | ||
acf356b1 TH |
3521 | dev->pio_mode = ata_xfer_mask2mode(pio_mask); |
3522 | dev->dma_mode = ata_xfer_mask2mode(dma_mask); | |
5444a6f4 | 3523 | |
4f65977d | 3524 | found = 1; |
b15b3eba | 3525 | if (ata_dma_enabled(dev)) |
5444a6f4 | 3526 | used_dma = 1; |
a6d5a51c | 3527 | } |
4f65977d | 3528 | if (!found) |
e82cbdb9 | 3529 | goto out; |
a6d5a51c TH |
3530 | |
3531 | /* step 2: always set host PIO timings */ | |
1eca4365 | 3532 | ata_for_each_dev(dev, link, ENABLED) { |
70cd071e | 3533 | if (dev->pio_mode == 0xff) { |
f15a1daf | 3534 | ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); |
e8e0619f | 3535 | rc = -EINVAL; |
e82cbdb9 | 3536 | goto out; |
e8e0619f TH |
3537 | } |
3538 | ||
3539 | dev->xfer_mode = dev->pio_mode; | |
3540 | dev->xfer_shift = ATA_SHIFT_PIO; | |
3541 | if (ap->ops->set_piomode) | |
3542 | ap->ops->set_piomode(ap, dev); | |
3543 | } | |
1da177e4 | 3544 | |
a6d5a51c | 3545 | /* step 3: set host DMA timings */ |
1eca4365 TH |
3546 | ata_for_each_dev(dev, link, ENABLED) { |
3547 | if (!ata_dma_enabled(dev)) | |
e8e0619f TH |
3548 | continue; |
3549 | ||
3550 | dev->xfer_mode = dev->dma_mode; | |
3551 | dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); | |
3552 | if (ap->ops->set_dmamode) | |
3553 | ap->ops->set_dmamode(ap, dev); | |
3554 | } | |
1da177e4 LT |
3555 | |
3556 | /* step 4: update devices' xfer mode */ | |
1eca4365 | 3557 | ata_for_each_dev(dev, link, ENABLED) { |
3373efd8 | 3558 | rc = ata_dev_set_mode(dev); |
5bbc53f4 | 3559 | if (rc) |
e82cbdb9 | 3560 | goto out; |
83206a29 | 3561 | } |
1da177e4 | 3562 | |
e8e0619f TH |
3563 | /* Record simplex status. If we selected DMA then the other |
3564 | * host channels are not permitted to do so. | |
5444a6f4 | 3565 | */ |
cca3974e | 3566 | if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) |
032af1ce | 3567 | ap->host->simplex_claimed = ap; |
5444a6f4 | 3568 | |
e82cbdb9 TH |
3569 | out: |
3570 | if (rc) | |
3571 | *r_failed_dev = dev; | |
3572 | return rc; | |
1da177e4 LT |
3573 | } |
3574 | ||
aa2731ad TH |
3575 | /** |
3576 | * ata_wait_ready - wait for link to become ready | |
3577 | * @link: link to be waited on | |
3578 | * @deadline: deadline jiffies for the operation | |
3579 | * @check_ready: callback to check link readiness | |
3580 | * | |
3581 | * Wait for @link to become ready. @check_ready should return | |
3582 | * positive number if @link is ready, 0 if it isn't, -ENODEV if | |
3583 | * link doesn't seem to be occupied, other errno for other error | |
3584 | * conditions. | |
3585 | * | |
3586 | * Transient -ENODEV conditions are allowed for | |
3587 | * ATA_TMOUT_FF_WAIT. | |
3588 | * | |
3589 | * LOCKING: | |
3590 | * EH context. | |
3591 | * | |
3592 | * RETURNS: | |
3593 | * 0 if @linke is ready before @deadline; otherwise, -errno. | |
3594 | */ | |
3595 | int ata_wait_ready(struct ata_link *link, unsigned long deadline, | |
3596 | int (*check_ready)(struct ata_link *link)) | |
3597 | { | |
3598 | unsigned long start = jiffies; | |
341c2c95 | 3599 | unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT); |
aa2731ad TH |
3600 | int warned = 0; |
3601 | ||
b1c72916 TH |
3602 | /* Slave readiness can't be tested separately from master. On |
3603 | * M/S emulation configuration, this function should be called | |
3604 | * only on the master and it will handle both master and slave. | |
3605 | */ | |
3606 | WARN_ON(link == link->ap->slave_link); | |
3607 | ||
aa2731ad TH |
3608 | if (time_after(nodev_deadline, deadline)) |
3609 | nodev_deadline = deadline; | |
3610 | ||
3611 | while (1) { | |
3612 | unsigned long now = jiffies; | |
3613 | int ready, tmp; | |
3614 | ||
3615 | ready = tmp = check_ready(link); | |
3616 | if (ready > 0) | |
3617 | return 0; | |
3618 | ||
3619 | /* -ENODEV could be transient. Ignore -ENODEV if link | |
3620 | * is online. Also, some SATA devices take a long | |
3621 | * time to clear 0xff after reset. For example, | |
3622 | * HHD424020F7SV00 iVDR needs >= 800ms while Quantum | |
3623 | * GoVault needs even more than that. Wait for | |
3624 | * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline. | |
3625 | * | |
3626 | * Note that some PATA controllers (pata_ali) explode | |
3627 | * if status register is read more than once when | |
3628 | * there's no device attached. | |
3629 | */ | |
3630 | if (ready == -ENODEV) { | |
3631 | if (ata_link_online(link)) | |
3632 | ready = 0; | |
3633 | else if ((link->ap->flags & ATA_FLAG_SATA) && | |
3634 | !ata_link_offline(link) && | |
3635 | time_before(now, nodev_deadline)) | |
3636 | ready = 0; | |
3637 | } | |
3638 | ||
3639 | if (ready) | |
3640 | return ready; | |
3641 | if (time_after(now, deadline)) | |
3642 | return -EBUSY; | |
3643 | ||
3644 | if (!warned && time_after(now, start + 5 * HZ) && | |
3645 | (deadline - now > 3 * HZ)) { | |
3646 | ata_link_printk(link, KERN_WARNING, | |
3647 | "link is slow to respond, please be patient " | |
3648 | "(ready=%d)\n", tmp); | |
3649 | warned = 1; | |
3650 | } | |
3651 | ||
3652 | msleep(50); | |
3653 | } | |
3654 | } | |
3655 | ||
3656 | /** | |
3657 | * ata_wait_after_reset - wait for link to become ready after reset | |
3658 | * @link: link to be waited on | |
3659 | * @deadline: deadline jiffies for the operation | |
3660 | * @check_ready: callback to check link readiness | |
3661 | * | |
3662 | * Wait for @link to become ready after reset. | |
3663 | * | |
3664 | * LOCKING: | |
3665 | * EH context. | |
3666 | * | |
3667 | * RETURNS: | |
3668 | * 0 if @linke is ready before @deadline; otherwise, -errno. | |
3669 | */ | |
2b4221bb | 3670 | int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, |
aa2731ad TH |
3671 | int (*check_ready)(struct ata_link *link)) |
3672 | { | |
341c2c95 | 3673 | msleep(ATA_WAIT_AFTER_RESET); |
aa2731ad TH |
3674 | |
3675 | return ata_wait_ready(link, deadline, check_ready); | |
3676 | } | |
3677 | ||
d7bb4cc7 | 3678 | /** |
936fd732 TH |
3679 | * sata_link_debounce - debounce SATA phy status |
3680 | * @link: ATA link to debounce SATA phy status for | |
d7bb4cc7 | 3681 | * @params: timing parameters { interval, duratinon, timeout } in msec |
d4b2bab4 | 3682 | * @deadline: deadline jiffies for the operation |
d7bb4cc7 | 3683 | * |
936fd732 | 3684 | * Make sure SStatus of @link reaches stable state, determined by |
d7bb4cc7 TH |
3685 | * holding the same value where DET is not 1 for @duration polled |
3686 | * every @interval, before @timeout. Timeout constraints the | |
d4b2bab4 TH |
3687 | * beginning of the stable state. Because DET gets stuck at 1 on |
3688 | * some controllers after hot unplugging, this functions waits | |
d7bb4cc7 TH |
3689 | * until timeout then returns 0 if DET is stable at 1. |
3690 | * | |
d4b2bab4 TH |
3691 | * @timeout is further limited by @deadline. The sooner of the |
3692 | * two is used. | |
3693 | * | |
d7bb4cc7 TH |
3694 | * LOCKING: |
3695 | * Kernel thread context (may sleep) | |
3696 | * | |
3697 | * RETURNS: | |
3698 | * 0 on success, -errno on failure. | |
3699 | */ | |
936fd732 TH |
3700 | int sata_link_debounce(struct ata_link *link, const unsigned long *params, |
3701 | unsigned long deadline) | |
7a7921e8 | 3702 | { |
341c2c95 TH |
3703 | unsigned long interval = params[0]; |
3704 | unsigned long duration = params[1]; | |
d4b2bab4 | 3705 | unsigned long last_jiffies, t; |
d7bb4cc7 TH |
3706 | u32 last, cur; |
3707 | int rc; | |
3708 | ||
341c2c95 | 3709 | t = ata_deadline(jiffies, params[2]); |
d4b2bab4 TH |
3710 | if (time_before(t, deadline)) |
3711 | deadline = t; | |
3712 | ||
936fd732 | 3713 | if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) |
d7bb4cc7 TH |
3714 | return rc; |
3715 | cur &= 0xf; | |
3716 | ||
3717 | last = cur; | |
3718 | last_jiffies = jiffies; | |
3719 | ||
3720 | while (1) { | |
341c2c95 | 3721 | msleep(interval); |
936fd732 | 3722 | if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) |
d7bb4cc7 TH |
3723 | return rc; |
3724 | cur &= 0xf; | |
3725 | ||
3726 | /* DET stable? */ | |
3727 | if (cur == last) { | |
d4b2bab4 | 3728 | if (cur == 1 && time_before(jiffies, deadline)) |
d7bb4cc7 | 3729 | continue; |
341c2c95 TH |
3730 | if (time_after(jiffies, |
3731 | ata_deadline(last_jiffies, duration))) | |
d7bb4cc7 TH |
3732 | return 0; |
3733 | continue; | |
3734 | } | |
3735 | ||
3736 | /* unstable, start over */ | |
3737 | last = cur; | |
3738 | last_jiffies = jiffies; | |
3739 | ||
f1545154 TH |
3740 | /* Check deadline. If debouncing failed, return |
3741 | * -EPIPE to tell upper layer to lower link speed. | |
3742 | */ | |
d4b2bab4 | 3743 | if (time_after(jiffies, deadline)) |
f1545154 | 3744 | return -EPIPE; |
d7bb4cc7 TH |
3745 | } |
3746 | } | |
3747 | ||
3748 | /** | |
936fd732 TH |
3749 | * sata_link_resume - resume SATA link |
3750 | * @link: ATA link to resume SATA | |
d7bb4cc7 | 3751 | * @params: timing parameters { interval, duratinon, timeout } in msec |
d4b2bab4 | 3752 | * @deadline: deadline jiffies for the operation |
d7bb4cc7 | 3753 | * |
936fd732 | 3754 | * Resume SATA phy @link and debounce it. |
d7bb4cc7 TH |
3755 | * |
3756 | * LOCKING: | |
3757 | * Kernel thread context (may sleep) | |
3758 | * | |
3759 | * RETURNS: | |
3760 | * 0 on success, -errno on failure. | |
3761 | */ | |
936fd732 TH |
3762 | int sata_link_resume(struct ata_link *link, const unsigned long *params, |
3763 | unsigned long deadline) | |
d7bb4cc7 | 3764 | { |
ac371987 | 3765 | u32 scontrol, serror; |
81952c54 TH |
3766 | int rc; |
3767 | ||
936fd732 | 3768 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
81952c54 | 3769 | return rc; |
7a7921e8 | 3770 | |
852ee16a | 3771 | scontrol = (scontrol & 0x0f0) | 0x300; |
81952c54 | 3772 | |
936fd732 | 3773 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
81952c54 | 3774 | return rc; |
7a7921e8 | 3775 | |
d7bb4cc7 TH |
3776 | /* Some PHYs react badly if SStatus is pounded immediately |
3777 | * after resuming. Delay 200ms before debouncing. | |
3778 | */ | |
3779 | msleep(200); | |
7a7921e8 | 3780 | |
ac371987 TH |
3781 | if ((rc = sata_link_debounce(link, params, deadline))) |
3782 | return rc; | |
3783 | ||
f046519f | 3784 | /* clear SError, some PHYs require this even for SRST to work */ |
ac371987 TH |
3785 | if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) |
3786 | rc = sata_scr_write(link, SCR_ERROR, serror); | |
ac371987 | 3787 | |
f046519f | 3788 | return rc != -EINVAL ? rc : 0; |
7a7921e8 TH |
3789 | } |
3790 | ||
f5914a46 | 3791 | /** |
0aa1113d | 3792 | * ata_std_prereset - prepare for reset |
cc0680a5 | 3793 | * @link: ATA link to be reset |
d4b2bab4 | 3794 | * @deadline: deadline jiffies for the operation |
f5914a46 | 3795 | * |
cc0680a5 | 3796 | * @link is about to be reset. Initialize it. Failure from |
b8cffc6a TH |
3797 | * prereset makes libata abort whole reset sequence and give up |
3798 | * that port, so prereset should be best-effort. It does its | |
3799 | * best to prepare for reset sequence but if things go wrong, it | |
3800 | * should just whine, not fail. | |
f5914a46 TH |
3801 | * |
3802 | * LOCKING: | |
3803 | * Kernel thread context (may sleep) | |
3804 | * | |
3805 | * RETURNS: | |
3806 | * 0 on success, -errno otherwise. | |
3807 | */ | |
0aa1113d | 3808 | int ata_std_prereset(struct ata_link *link, unsigned long deadline) |
f5914a46 | 3809 | { |
cc0680a5 | 3810 | struct ata_port *ap = link->ap; |
936fd732 | 3811 | struct ata_eh_context *ehc = &link->eh_context; |
e9c83914 | 3812 | const unsigned long *timing = sata_ehc_deb_timing(ehc); |
f5914a46 TH |
3813 | int rc; |
3814 | ||
f5914a46 TH |
3815 | /* if we're about to do hardreset, nothing more to do */ |
3816 | if (ehc->i.action & ATA_EH_HARDRESET) | |
3817 | return 0; | |
3818 | ||
936fd732 | 3819 | /* if SATA, resume link */ |
a16abc0b | 3820 | if (ap->flags & ATA_FLAG_SATA) { |
936fd732 | 3821 | rc = sata_link_resume(link, timing, deadline); |
b8cffc6a TH |
3822 | /* whine about phy resume failure but proceed */ |
3823 | if (rc && rc != -EOPNOTSUPP) | |
cc0680a5 | 3824 | ata_link_printk(link, KERN_WARNING, "failed to resume " |
f5914a46 | 3825 | "link for reset (errno=%d)\n", rc); |
f5914a46 TH |
3826 | } |
3827 | ||
45db2f6c | 3828 | /* no point in trying softreset on offline link */ |
b1c72916 | 3829 | if (ata_phys_link_offline(link)) |
45db2f6c TH |
3830 | ehc->i.action &= ~ATA_EH_SOFTRESET; |
3831 | ||
f5914a46 TH |
3832 | return 0; |
3833 | } | |
3834 | ||
c2bd5804 | 3835 | /** |
624d5c51 TH |
3836 | * sata_link_hardreset - reset link via SATA phy reset |
3837 | * @link: link to reset | |
3838 | * @timing: timing parameters { interval, duratinon, timeout } in msec | |
d4b2bab4 | 3839 | * @deadline: deadline jiffies for the operation |
9dadd45b TH |
3840 | * @online: optional out parameter indicating link onlineness |
3841 | * @check_ready: optional callback to check link readiness | |
c2bd5804 | 3842 | * |
624d5c51 | 3843 | * SATA phy-reset @link using DET bits of SControl register. |
9dadd45b TH |
3844 | * After hardreset, link readiness is waited upon using |
3845 | * ata_wait_ready() if @check_ready is specified. LLDs are | |
3846 | * allowed to not specify @check_ready and wait itself after this | |
3847 | * function returns. Device classification is LLD's | |
3848 | * responsibility. | |
3849 | * | |
3850 | * *@online is set to one iff reset succeeded and @link is online | |
3851 | * after reset. | |
c2bd5804 TH |
3852 | * |
3853 | * LOCKING: | |
3854 | * Kernel thread context (may sleep) | |
3855 | * | |
3856 | * RETURNS: | |
3857 | * 0 on success, -errno otherwise. | |
3858 | */ | |
624d5c51 | 3859 | int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, |
9dadd45b TH |
3860 | unsigned long deadline, |
3861 | bool *online, int (*check_ready)(struct ata_link *)) | |
c2bd5804 | 3862 | { |
624d5c51 | 3863 | u32 scontrol; |
81952c54 | 3864 | int rc; |
852ee16a | 3865 | |
c2bd5804 TH |
3866 | DPRINTK("ENTER\n"); |
3867 | ||
9dadd45b TH |
3868 | if (online) |
3869 | *online = false; | |
3870 | ||
936fd732 | 3871 | if (sata_set_spd_needed(link)) { |
1c3fae4d TH |
3872 | /* SATA spec says nothing about how to reconfigure |
3873 | * spd. To be on the safe side, turn off phy during | |
3874 | * reconfiguration. This works for at least ICH7 AHCI | |
3875 | * and Sil3124. | |
3876 | */ | |
936fd732 | 3877 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
b6103f6d | 3878 | goto out; |
81952c54 | 3879 | |
a34b6fc0 | 3880 | scontrol = (scontrol & 0x0f0) | 0x304; |
81952c54 | 3881 | |
936fd732 | 3882 | if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) |
b6103f6d | 3883 | goto out; |
1c3fae4d | 3884 | |
936fd732 | 3885 | sata_set_spd(link); |
1c3fae4d TH |
3886 | } |
3887 | ||
3888 | /* issue phy wake/reset */ | |
936fd732 | 3889 | if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) |
b6103f6d | 3890 | goto out; |
81952c54 | 3891 | |
852ee16a | 3892 | scontrol = (scontrol & 0x0f0) | 0x301; |
81952c54 | 3893 | |
936fd732 | 3894 | if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol))) |
b6103f6d | 3895 | goto out; |
c2bd5804 | 3896 | |
1c3fae4d | 3897 | /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 |
c2bd5804 TH |
3898 | * 10.4.2 says at least 1 ms. |
3899 | */ | |
3900 | msleep(1); | |
3901 | ||
936fd732 TH |
3902 | /* bring link back */ |
3903 | rc = sata_link_resume(link, timing, deadline); | |
9dadd45b TH |
3904 | if (rc) |
3905 | goto out; | |
3906 | /* if link is offline nothing more to do */ | |
b1c72916 | 3907 | if (ata_phys_link_offline(link)) |
9dadd45b TH |
3908 | goto out; |
3909 | ||
3910 | /* Link is online. From this point, -ENODEV too is an error. */ | |
3911 | if (online) | |
3912 | *online = true; | |
3913 | ||
071f44b1 | 3914 | if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) { |
9dadd45b TH |
3915 | /* If PMP is supported, we have to do follow-up SRST. |
3916 | * Some PMPs don't send D2H Reg FIS after hardreset if | |
3917 | * the first port is empty. Wait only for | |
3918 | * ATA_TMOUT_PMP_SRST_WAIT. | |
3919 | */ | |
3920 | if (check_ready) { | |
3921 | unsigned long pmp_deadline; | |
3922 | ||
341c2c95 TH |
3923 | pmp_deadline = ata_deadline(jiffies, |
3924 | ATA_TMOUT_PMP_SRST_WAIT); | |
9dadd45b TH |
3925 | if (time_after(pmp_deadline, deadline)) |
3926 | pmp_deadline = deadline; | |
3927 | ata_wait_ready(link, pmp_deadline, check_ready); | |
3928 | } | |
3929 | rc = -EAGAIN; | |
3930 | goto out; | |
3931 | } | |
3932 | ||
3933 | rc = 0; | |
3934 | if (check_ready) | |
3935 | rc = ata_wait_ready(link, deadline, check_ready); | |
b6103f6d | 3936 | out: |
0cbf0711 TH |
3937 | if (rc && rc != -EAGAIN) { |
3938 | /* online is set iff link is online && reset succeeded */ | |
3939 | if (online) | |
3940 | *online = false; | |
9dadd45b TH |
3941 | ata_link_printk(link, KERN_ERR, |
3942 | "COMRESET failed (errno=%d)\n", rc); | |
0cbf0711 | 3943 | } |
b6103f6d TH |
3944 | DPRINTK("EXIT, rc=%d\n", rc); |
3945 | return rc; | |
3946 | } | |
3947 | ||
57c9efdf TH |
3948 | /** |
3949 | * sata_std_hardreset - COMRESET w/o waiting or classification | |
3950 | * @link: link to reset | |
3951 | * @class: resulting class of attached device | |
3952 | * @deadline: deadline jiffies for the operation | |
3953 | * | |
3954 | * Standard SATA COMRESET w/o waiting or classification. | |
3955 | * | |
3956 | * LOCKING: | |
3957 | * Kernel thread context (may sleep) | |
3958 | * | |
3959 | * RETURNS: | |
3960 | * 0 if link offline, -EAGAIN if link online, -errno on errors. | |
3961 | */ | |
3962 | int sata_std_hardreset(struct ata_link *link, unsigned int *class, | |
3963 | unsigned long deadline) | |
3964 | { | |
3965 | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); | |
3966 | bool online; | |
3967 | int rc; | |
3968 | ||
3969 | /* do hardreset */ | |
3970 | rc = sata_link_hardreset(link, timing, deadline, &online, NULL); | |
57c9efdf TH |
3971 | return online ? -EAGAIN : rc; |
3972 | } | |
3973 | ||
c2bd5804 | 3974 | /** |
203c75b8 | 3975 | * ata_std_postreset - standard postreset callback |
cc0680a5 | 3976 | * @link: the target ata_link |
c2bd5804 TH |
3977 | * @classes: classes of attached devices |
3978 | * | |
3979 | * This function is invoked after a successful reset. Note that | |
3980 | * the device might have been reset more than once using | |
3981 | * different reset methods before postreset is invoked. | |
c2bd5804 | 3982 | * |
c2bd5804 TH |
3983 | * LOCKING: |
3984 | * Kernel thread context (may sleep) | |
3985 | */ | |
203c75b8 | 3986 | void ata_std_postreset(struct ata_link *link, unsigned int *classes) |
c2bd5804 | 3987 | { |
f046519f TH |
3988 | u32 serror; |
3989 | ||
c2bd5804 TH |
3990 | DPRINTK("ENTER\n"); |
3991 | ||
f046519f TH |
3992 | /* reset complete, clear SError */ |
3993 | if (!sata_scr_read(link, SCR_ERROR, &serror)) | |
3994 | sata_scr_write(link, SCR_ERROR, serror); | |
3995 | ||
c2bd5804 | 3996 | /* print link status */ |
936fd732 | 3997 | sata_print_link_status(link); |
c2bd5804 | 3998 | |
c2bd5804 TH |
3999 | DPRINTK("EXIT\n"); |
4000 | } | |
4001 | ||
623a3128 TH |
4002 | /** |
4003 | * ata_dev_same_device - Determine whether new ID matches configured device | |
623a3128 TH |
4004 | * @dev: device to compare against |
4005 | * @new_class: class of the new device | |
4006 | * @new_id: IDENTIFY page of the new device | |
4007 | * | |
4008 | * Compare @new_class and @new_id against @dev and determine | |
4009 | * whether @dev is the device indicated by @new_class and | |
4010 | * @new_id. | |
4011 | * | |
4012 | * LOCKING: | |
4013 | * None. | |
4014 | * | |
4015 | * RETURNS: | |
4016 | * 1 if @dev matches @new_class and @new_id, 0 otherwise. | |
4017 | */ | |
3373efd8 TH |
4018 | static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, |
4019 | const u16 *new_id) | |
623a3128 TH |
4020 | { |
4021 | const u16 *old_id = dev->id; | |
a0cf733b TH |
4022 | unsigned char model[2][ATA_ID_PROD_LEN + 1]; |
4023 | unsigned char serial[2][ATA_ID_SERNO_LEN + 1]; | |
623a3128 TH |
4024 | |
4025 | if (dev->class != new_class) { | |
f15a1daf TH |
4026 | ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", |
4027 | dev->class, new_class); | |
623a3128 TH |
4028 | return 0; |
4029 | } | |
4030 | ||
a0cf733b TH |
4031 | ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0])); |
4032 | ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1])); | |
4033 | ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0])); | |
4034 | ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1])); | |
623a3128 TH |
4035 | |
4036 | if (strcmp(model[0], model[1])) { | |
f15a1daf TH |
4037 | ata_dev_printk(dev, KERN_INFO, "model number mismatch " |
4038 | "'%s' != '%s'\n", model[0], model[1]); | |
623a3128 TH |
4039 | return 0; |
4040 | } | |
4041 | ||
4042 | if (strcmp(serial[0], serial[1])) { | |
f15a1daf TH |
4043 | ata_dev_printk(dev, KERN_INFO, "serial number mismatch " |
4044 | "'%s' != '%s'\n", serial[0], serial[1]); | |
623a3128 TH |
4045 | return 0; |
4046 | } | |
4047 | ||
623a3128 TH |
4048 | return 1; |
4049 | } | |
4050 | ||
4051 | /** | |
fe30911b | 4052 | * ata_dev_reread_id - Re-read IDENTIFY data |
3fae450c | 4053 | * @dev: target ATA device |
bff04647 | 4054 | * @readid_flags: read ID flags |
623a3128 TH |
4055 | * |
4056 | * Re-read IDENTIFY page and make sure @dev is still attached to | |
4057 | * the port. | |
4058 | * | |
4059 | * LOCKING: | |
4060 | * Kernel thread context (may sleep) | |
4061 | * | |
4062 | * RETURNS: | |
4063 | * 0 on success, negative errno otherwise | |
4064 | */ | |
fe30911b | 4065 | int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) |
623a3128 | 4066 | { |
5eb45c02 | 4067 | unsigned int class = dev->class; |
9af5c9c9 | 4068 | u16 *id = (void *)dev->link->ap->sector_buf; |
623a3128 TH |
4069 | int rc; |
4070 | ||
fe635c7e | 4071 | /* read ID data */ |
bff04647 | 4072 | rc = ata_dev_read_id(dev, &class, readid_flags, id); |
623a3128 | 4073 | if (rc) |
fe30911b | 4074 | return rc; |
623a3128 TH |
4075 | |
4076 | /* is the device still there? */ | |
fe30911b TH |
4077 | if (!ata_dev_same_device(dev, class, id)) |
4078 | return -ENODEV; | |
623a3128 | 4079 | |
fe635c7e | 4080 | memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); |
fe30911b TH |
4081 | return 0; |
4082 | } | |
4083 | ||
4084 | /** | |
4085 | * ata_dev_revalidate - Revalidate ATA device | |
4086 | * @dev: device to revalidate | |
422c9daa | 4087 | * @new_class: new class code |
fe30911b TH |
4088 | * @readid_flags: read ID flags |
4089 | * | |
4090 | * Re-read IDENTIFY page, make sure @dev is still attached to the | |
4091 | * port and reconfigure it according to the new IDENTIFY page. | |
4092 | * | |
4093 | * LOCKING: | |
4094 | * Kernel thread context (may sleep) | |
4095 | * | |
4096 | * RETURNS: | |
4097 | * 0 on success, negative errno otherwise | |
4098 | */ | |
422c9daa TH |
4099 | int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, |
4100 | unsigned int readid_flags) | |
fe30911b | 4101 | { |
6ddcd3b0 | 4102 | u64 n_sectors = dev->n_sectors; |
5920dadf | 4103 | u64 n_native_sectors = dev->n_native_sectors; |
fe30911b TH |
4104 | int rc; |
4105 | ||
4106 | if (!ata_dev_enabled(dev)) | |
4107 | return -ENODEV; | |
4108 | ||
422c9daa TH |
4109 | /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ |
4110 | if (ata_class_enabled(new_class) && | |
f0d0613d BP |
4111 | new_class != ATA_DEV_ATA && |
4112 | new_class != ATA_DEV_ATAPI && | |
4113 | new_class != ATA_DEV_SEMB) { | |
422c9daa TH |
4114 | ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n", |
4115 | dev->class, new_class); | |
4116 | rc = -ENODEV; | |
4117 | goto fail; | |
4118 | } | |
4119 | ||
fe30911b TH |
4120 | /* re-read ID */ |
4121 | rc = ata_dev_reread_id(dev, readid_flags); | |
4122 | if (rc) | |
4123 | goto fail; | |
623a3128 TH |
4124 | |
4125 | /* configure device according to the new ID */ | |
efdaedc4 | 4126 | rc = ata_dev_configure(dev); |
6ddcd3b0 TH |
4127 | if (rc) |
4128 | goto fail; | |
4129 | ||
4130 | /* verify n_sectors hasn't changed */ | |
b54eebd6 TH |
4131 | if (dev->class == ATA_DEV_ATA && n_sectors && |
4132 | dev->n_sectors != n_sectors) { | |
5920dadf | 4133 | ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch " |
6ddcd3b0 TH |
4134 | "%llu != %llu\n", |
4135 | (unsigned long long)n_sectors, | |
4136 | (unsigned long long)dev->n_sectors); | |
5920dadf TH |
4137 | /* |
4138 | * Something could have caused HPA to be unlocked | |
4139 | * involuntarily. If n_native_sectors hasn't changed | |
4140 | * and the new size matches it, keep the device. | |
4141 | */ | |
4142 | if (dev->n_native_sectors == n_native_sectors && | |
4143 | dev->n_sectors > n_sectors && | |
4144 | dev->n_sectors == n_native_sectors) { | |
4145 | ata_dev_printk(dev, KERN_WARNING, | |
4146 | "new n_sectors matches native, probably " | |
4147 | "late HPA unlock, continuing\n"); | |
4148 | /* keep using the old n_sectors */ | |
4149 | dev->n_sectors = n_sectors; | |
4150 | } else { | |
4151 | /* restore original n_[native]_sectors and fail */ | |
4152 | dev->n_native_sectors = n_native_sectors; | |
4153 | dev->n_sectors = n_sectors; | |
4154 | rc = -ENODEV; | |
4155 | goto fail; | |
4156 | } | |
6ddcd3b0 TH |
4157 | } |
4158 | ||
4159 | return 0; | |
623a3128 TH |
4160 | |
4161 | fail: | |
f15a1daf | 4162 | ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); |
623a3128 TH |
4163 | return rc; |
4164 | } | |
4165 | ||
6919a0a6 AC |
4166 | struct ata_blacklist_entry { |
4167 | const char *model_num; | |
4168 | const char *model_rev; | |
4169 | unsigned long horkage; | |
4170 | }; | |
4171 | ||
4172 | static const struct ata_blacklist_entry ata_device_blacklist [] = { | |
4173 | /* Devices with DMA related problems under Linux */ | |
4174 | { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA }, | |
4175 | { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA }, | |
4176 | { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA }, | |
4177 | { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA }, | |
4178 | { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA }, | |
4179 | { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA }, | |
4180 | { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA }, | |
4181 | { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA }, | |
4182 | { "CRD-8400B", NULL, ATA_HORKAGE_NODMA }, | |
4183 | { "CRD-8480B", NULL, ATA_HORKAGE_NODMA }, | |
4184 | { "CRD-8482B", NULL, ATA_HORKAGE_NODMA }, | |
4185 | { "CRD-84", NULL, ATA_HORKAGE_NODMA }, | |
4186 | { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA }, | |
4187 | { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, | |
4188 | { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA }, | |
4189 | { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA }, | |
4190 | { "HITACHI CDR-8335", NULL, ATA_HORKAGE_NODMA }, | |
4191 | { "HITACHI CDR-8435", NULL, ATA_HORKAGE_NODMA }, | |
4192 | { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA }, | |
4193 | { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA }, | |
4194 | { "CD-532E-A", NULL, ATA_HORKAGE_NODMA }, | |
4195 | { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA }, | |
4196 | { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA }, | |
4197 | { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA }, | |
4198 | { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA }, | |
4199 | { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, | |
6919a0a6 AC |
4200 | { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, |
4201 | { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, | |
2dcb407e | 4202 | { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, |
39f19886 | 4203 | { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, |
3af9a77a | 4204 | /* Odd clown on sil3726/4726 PMPs */ |
50af2fa1 | 4205 | { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, |
6919a0a6 | 4206 | |
18d6e9d5 | 4207 | /* Weird ATAPI devices */ |
40a1d531 | 4208 | { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, |
6a87e42e | 4209 | { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, |
18d6e9d5 | 4210 | |
6919a0a6 AC |
4211 | /* Devices we expect to fail diagnostics */ |
4212 | ||
4213 | /* Devices where NCQ should be avoided */ | |
4214 | /* NCQ is slow */ | |
2dcb407e | 4215 | { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, |
459ad688 | 4216 | { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, |
09125ea6 TH |
4217 | /* http://thread.gmane.org/gmane.linux.ide/14907 */ |
4218 | { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, | |
7acfaf30 | 4219 | /* NCQ is broken */ |
539cc7c7 | 4220 | { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ }, |
0e3dbc01 | 4221 | { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, |
da6f0ec2 | 4222 | { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, |
e41bd3e8 | 4223 | { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, |
5ccfca97 | 4224 | { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ }, |
539cc7c7 | 4225 | |
ac70a964 | 4226 | /* Seagate NCQ + FLUSH CACHE firmware bug */ |
d10d491f | 4227 | { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ | |
ac70a964 | 4228 | ATA_HORKAGE_FIRMWARE_WARN }, |
d10d491f | 4229 | { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ | |
ac70a964 | 4230 | ATA_HORKAGE_FIRMWARE_WARN }, |
d10d491f | 4231 | { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ | |
ac70a964 | 4232 | ATA_HORKAGE_FIRMWARE_WARN }, |
d10d491f | 4233 | { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ | |
ac70a964 | 4234 | ATA_HORKAGE_FIRMWARE_WARN }, |
d10d491f | 4235 | { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ | |
ac70a964 | 4236 | ATA_HORKAGE_FIRMWARE_WARN }, |
d10d491f TH |
4237 | |
4238 | { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ | | |
4239 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4240 | { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ | | |
4241 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4242 | { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ | | |
4243 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4244 | { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ | | |
4245 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4246 | { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ | | |
4247 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4248 | ||
4249 | { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ | | |
4250 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4251 | { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ | | |
4252 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4253 | { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ | | |
4254 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4255 | { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ | | |
4256 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4257 | { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ | | |
4258 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4259 | ||
4260 | { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ | | |
4261 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4262 | { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ | | |
4263 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4264 | { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ | | |
4265 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4266 | { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ | | |
4267 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4268 | { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ | | |
4269 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4270 | ||
4271 | { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ | | |
4272 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4273 | { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ | | |
4274 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4275 | { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ | | |
4276 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4277 | { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ | | |
4278 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4279 | { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ | | |
4280 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4281 | ||
4282 | { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ | | |
4283 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4284 | { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ | | |
4285 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4286 | { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ | | |
4287 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4288 | { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ | | |
4289 | ATA_HORKAGE_FIRMWARE_WARN }, | |
4290 | { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ | | |
ac70a964 TH |
4291 | ATA_HORKAGE_FIRMWARE_WARN }, |
4292 | ||
36e337d0 RH |
4293 | /* Blacklist entries taken from Silicon Image 3124/3132 |
4294 | Windows driver .inf file - also several Linux problem reports */ | |
4295 | { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, | |
4296 | { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, | |
4297 | { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, | |
6919a0a6 | 4298 | |
16c55b03 TH |
4299 | /* devices which puke on READ_NATIVE_MAX */ |
4300 | { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, }, | |
4301 | { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA }, | |
4302 | { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA }, | |
4303 | { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA }, | |
6919a0a6 | 4304 | |
93328e11 AC |
4305 | /* Devices which report 1 sector over size HPA */ |
4306 | { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, }, | |
4307 | { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, }, | |
b152fcd3 | 4308 | { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, }, |
93328e11 | 4309 | |
6bbfd53d AC |
4310 | /* Devices which get the IVB wrong */ |
4311 | { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, }, | |
a79067e5 AC |
4312 | /* Maybe we should just blacklist TSSTcorp... */ |
4313 | { "TSSTcorp CDDVDW SH-S202H", "SB00", ATA_HORKAGE_IVB, }, | |
4314 | { "TSSTcorp CDDVDW SH-S202H", "SB01", ATA_HORKAGE_IVB, }, | |
6bbfd53d | 4315 | { "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, }, |
e9f33406 PM |
4316 | { "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, }, |
4317 | { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, | |
4318 | { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, | |
6bbfd53d | 4319 | |
9ce8e307 JA |
4320 | /* Devices that do not need bridging limits applied */ |
4321 | { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, | |
4322 | ||
9062712f TH |
4323 | /* Devices which aren't very happy with higher link speeds */ |
4324 | { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, | |
4325 | ||
d0cb43b3 TH |
4326 | /* |
4327 | * Devices which choke on SETXFER. Applies only if both the | |
4328 | * device and controller are SATA. | |
4329 | */ | |
4330 | { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, | |
4331 | ||
6919a0a6 AC |
4332 | /* End Marker */ |
4333 | { } | |
1da177e4 | 4334 | }; |
2e9edbf8 | 4335 | |
741b7763 | 4336 | static int strn_pattern_cmp(const char *patt, const char *name, int wildchar) |
539cc7c7 JG |
4337 | { |
4338 | const char *p; | |
4339 | int len; | |
4340 | ||
4341 | /* | |
4342 | * check for trailing wildcard: *\0 | |
4343 | */ | |
4344 | p = strchr(patt, wildchar); | |
4345 | if (p && ((*(p + 1)) == 0)) | |
4346 | len = p - patt; | |
317b50b8 | 4347 | else { |
539cc7c7 | 4348 | len = strlen(name); |
317b50b8 AP |
4349 | if (!len) { |
4350 | if (!*patt) | |
4351 | return 0; | |
4352 | return -1; | |
4353 | } | |
4354 | } | |
539cc7c7 JG |
4355 | |
4356 | return strncmp(patt, name, len); | |
4357 | } | |
4358 | ||
75683fe7 | 4359 | static unsigned long ata_dev_blacklisted(const struct ata_device *dev) |
1da177e4 | 4360 | { |
8bfa79fc TH |
4361 | unsigned char model_num[ATA_ID_PROD_LEN + 1]; |
4362 | unsigned char model_rev[ATA_ID_FW_REV_LEN + 1]; | |
6919a0a6 | 4363 | const struct ata_blacklist_entry *ad = ata_device_blacklist; |
3a778275 | 4364 | |
8bfa79fc TH |
4365 | ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); |
4366 | ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev)); | |
1da177e4 | 4367 | |
6919a0a6 | 4368 | while (ad->model_num) { |
539cc7c7 | 4369 | if (!strn_pattern_cmp(ad->model_num, model_num, '*')) { |
6919a0a6 AC |
4370 | if (ad->model_rev == NULL) |
4371 | return ad->horkage; | |
539cc7c7 | 4372 | if (!strn_pattern_cmp(ad->model_rev, model_rev, '*')) |
6919a0a6 | 4373 | return ad->horkage; |
f4b15fef | 4374 | } |
6919a0a6 | 4375 | ad++; |
f4b15fef | 4376 | } |
1da177e4 LT |
4377 | return 0; |
4378 | } | |
4379 | ||
6919a0a6 AC |
4380 | static int ata_dma_blacklisted(const struct ata_device *dev) |
4381 | { | |
4382 | /* We don't support polling DMA. | |
4383 | * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) | |
4384 | * if the LLDD handles only interrupts in the HSM_ST_LAST state. | |
4385 | */ | |
9af5c9c9 | 4386 | if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) && |
6919a0a6 AC |
4387 | (dev->flags & ATA_DFLAG_CDB_INTR)) |
4388 | return 1; | |
75683fe7 | 4389 | return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0; |
6919a0a6 AC |
4390 | } |
4391 | ||
6bbfd53d AC |
4392 | /** |
4393 | * ata_is_40wire - check drive side detection | |
4394 | * @dev: device | |
4395 | * | |
4396 | * Perform drive side detection decoding, allowing for device vendors | |
4397 | * who can't follow the documentation. | |
4398 | */ | |
4399 | ||
4400 | static int ata_is_40wire(struct ata_device *dev) | |
4401 | { | |
4402 | if (dev->horkage & ATA_HORKAGE_IVB) | |
4403 | return ata_drive_40wire_relaxed(dev->id); | |
4404 | return ata_drive_40wire(dev->id); | |
4405 | } | |
4406 | ||
15a5551c AC |
4407 | /** |
4408 | * cable_is_40wire - 40/80/SATA decider | |
4409 | * @ap: port to consider | |
4410 | * | |
4411 | * This function encapsulates the policy for speed management | |
4412 | * in one place. At the moment we don't cache the result but | |
4413 | * there is a good case for setting ap->cbl to the result when | |
4414 | * we are called with unknown cables (and figuring out if it | |
4415 | * impacts hotplug at all). | |
4416 | * | |
4417 | * Return 1 if the cable appears to be 40 wire. | |
4418 | */ | |
4419 | ||
4420 | static int cable_is_40wire(struct ata_port *ap) | |
4421 | { | |
4422 | struct ata_link *link; | |
4423 | struct ata_device *dev; | |
4424 | ||
4a9c7b33 | 4425 | /* If the controller thinks we are 40 wire, we are. */ |
15a5551c AC |
4426 | if (ap->cbl == ATA_CBL_PATA40) |
4427 | return 1; | |
4a9c7b33 TH |
4428 | |
4429 | /* If the controller thinks we are 80 wire, we are. */ | |
15a5551c AC |
4430 | if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) |
4431 | return 0; | |
4a9c7b33 TH |
4432 | |
4433 | /* If the system is known to be 40 wire short cable (eg | |
4434 | * laptop), then we allow 80 wire modes even if the drive | |
4435 | * isn't sure. | |
4436 | */ | |
f792068e AC |
4437 | if (ap->cbl == ATA_CBL_PATA40_SHORT) |
4438 | return 0; | |
4a9c7b33 TH |
4439 | |
4440 | /* If the controller doesn't know, we scan. | |
4441 | * | |
4442 | * Note: We look for all 40 wire detects at this point. Any | |
4443 | * 80 wire detect is taken to be 80 wire cable because | |
4444 | * - in many setups only the one drive (slave if present) will | |
4445 | * give a valid detect | |
4446 | * - if you have a non detect capable drive you don't want it | |
4447 | * to colour the choice | |
4448 | */ | |
1eca4365 TH |
4449 | ata_for_each_link(link, ap, EDGE) { |
4450 | ata_for_each_dev(dev, link, ENABLED) { | |
4451 | if (!ata_is_40wire(dev)) | |
15a5551c AC |
4452 | return 0; |
4453 | } | |
4454 | } | |
4455 | return 1; | |
4456 | } | |
4457 | ||
a6d5a51c TH |
4458 | /** |
4459 | * ata_dev_xfermask - Compute supported xfermask of the given device | |
a6d5a51c TH |
4460 | * @dev: Device to compute xfermask for |
4461 | * | |
acf356b1 TH |
4462 | * Compute supported xfermask of @dev and store it in |
4463 | * dev->*_mask. This function is responsible for applying all | |
4464 | * known limits including host controller limits, device | |
4465 | * blacklist, etc... | |
a6d5a51c TH |
4466 | * |
4467 | * LOCKING: | |
4468 | * None. | |
a6d5a51c | 4469 | */ |
3373efd8 | 4470 | static void ata_dev_xfermask(struct ata_device *dev) |
1da177e4 | 4471 | { |
9af5c9c9 TH |
4472 | struct ata_link *link = dev->link; |
4473 | struct ata_port *ap = link->ap; | |
cca3974e | 4474 | struct ata_host *host = ap->host; |
a6d5a51c | 4475 | unsigned long xfer_mask; |
1da177e4 | 4476 | |
37deecb5 | 4477 | /* controller modes available */ |
565083e1 TH |
4478 | xfer_mask = ata_pack_xfermask(ap->pio_mask, |
4479 | ap->mwdma_mask, ap->udma_mask); | |
4480 | ||
8343f889 | 4481 | /* drive modes available */ |
37deecb5 TH |
4482 | xfer_mask &= ata_pack_xfermask(dev->pio_mask, |
4483 | dev->mwdma_mask, dev->udma_mask); | |
4484 | xfer_mask &= ata_id_xfermask(dev->id); | |
565083e1 | 4485 | |
b352e57d AC |
4486 | /* |
4487 | * CFA Advanced TrueIDE timings are not allowed on a shared | |
4488 | * cable | |
4489 | */ | |
4490 | if (ata_dev_pair(dev)) { | |
4491 | /* No PIO5 or PIO6 */ | |
4492 | xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5)); | |
4493 | /* No MWDMA3 or MWDMA 4 */ | |
4494 | xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3)); | |
4495 | } | |
4496 | ||
37deecb5 TH |
4497 | if (ata_dma_blacklisted(dev)) { |
4498 | xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); | |
f15a1daf TH |
4499 | ata_dev_printk(dev, KERN_WARNING, |
4500 | "device is on DMA blacklist, disabling DMA\n"); | |
37deecb5 | 4501 | } |
a6d5a51c | 4502 | |
14d66ab7 | 4503 | if ((host->flags & ATA_HOST_SIMPLEX) && |
2dcb407e | 4504 | host->simplex_claimed && host->simplex_claimed != ap) { |
37deecb5 TH |
4505 | xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); |
4506 | ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " | |
4507 | "other device, disabling DMA\n"); | |
5444a6f4 | 4508 | } |
565083e1 | 4509 | |
e424675f JG |
4510 | if (ap->flags & ATA_FLAG_NO_IORDY) |
4511 | xfer_mask &= ata_pio_mask_no_iordy(dev); | |
4512 | ||
5444a6f4 | 4513 | if (ap->ops->mode_filter) |
a76b62ca | 4514 | xfer_mask = ap->ops->mode_filter(dev, xfer_mask); |
5444a6f4 | 4515 | |
8343f889 RH |
4516 | /* Apply cable rule here. Don't apply it early because when |
4517 | * we handle hot plug the cable type can itself change. | |
4518 | * Check this last so that we know if the transfer rate was | |
4519 | * solely limited by the cable. | |
4520 | * Unknown or 80 wire cables reported host side are checked | |
4521 | * drive side as well. Cases where we know a 40wire cable | |
4522 | * is used safely for 80 are not checked here. | |
4523 | */ | |
4524 | if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) | |
4525 | /* UDMA/44 or higher would be available */ | |
15a5551c | 4526 | if (cable_is_40wire(ap)) { |
2dcb407e | 4527 | ata_dev_printk(dev, KERN_WARNING, |
8343f889 RH |
4528 | "limited to UDMA/33 due to 40-wire cable\n"); |
4529 | xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); | |
4530 | } | |
4531 | ||
565083e1 TH |
4532 | ata_unpack_xfermask(xfer_mask, &dev->pio_mask, |
4533 | &dev->mwdma_mask, &dev->udma_mask); | |
1da177e4 LT |
4534 | } |
4535 | ||
1da177e4 LT |
4536 | /** |
4537 | * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command | |
1da177e4 LT |
4538 | * @dev: Device to which command will be sent |
4539 | * | |
780a87f7 JG |
4540 | * Issue SET FEATURES - XFER MODE command to device @dev |
4541 | * on port @ap. | |
4542 | * | |
1da177e4 | 4543 | * LOCKING: |
0cba632b | 4544 | * PCI/etc. bus probe sem. |
83206a29 TH |
4545 | * |
4546 | * RETURNS: | |
4547 | * 0 on success, AC_ERR_* mask otherwise. | |
1da177e4 LT |
4548 | */ |
4549 | ||
3373efd8 | 4550 | static unsigned int ata_dev_set_xfermode(struct ata_device *dev) |
1da177e4 | 4551 | { |
a0123703 | 4552 | struct ata_taskfile tf; |
83206a29 | 4553 | unsigned int err_mask; |
1da177e4 LT |
4554 | |
4555 | /* set up set-features taskfile */ | |
4556 | DPRINTK("set features - xfer mode\n"); | |
4557 | ||
464cf177 TH |
4558 | /* Some controllers and ATAPI devices show flaky interrupt |
4559 | * behavior after setting xfer mode. Use polling instead. | |
4560 | */ | |
3373efd8 | 4561 | ata_tf_init(dev, &tf); |
a0123703 TH |
4562 | tf.command = ATA_CMD_SET_FEATURES; |
4563 | tf.feature = SETFEATURES_XFER; | |
464cf177 | 4564 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; |
a0123703 | 4565 | tf.protocol = ATA_PROT_NODATA; |
b9f8ab2d | 4566 | /* If we are using IORDY we must send the mode setting command */ |
11b7becc JG |
4567 | if (ata_pio_need_iordy(dev)) |
4568 | tf.nsect = dev->xfer_mode; | |
b9f8ab2d AC |
4569 | /* If the device has IORDY and the controller does not - turn it off */ |
4570 | else if (ata_id_has_iordy(dev->id)) | |
11b7becc | 4571 | tf.nsect = 0x01; |
b9f8ab2d AC |
4572 | else /* In the ancient relic department - skip all of this */ |
4573 | return 0; | |
1da177e4 | 4574 | |
2b789108 | 4575 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
9f45cbd3 KCA |
4576 | |
4577 | DPRINTK("EXIT, err_mask=%x\n", err_mask); | |
4578 | return err_mask; | |
4579 | } | |
9f45cbd3 | 4580 | /** |
218f3d30 | 4581 | * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES |
9f45cbd3 KCA |
4582 | * @dev: Device to which command will be sent |
4583 | * @enable: Whether to enable or disable the feature | |
218f3d30 | 4584 | * @feature: The sector count represents the feature to set |
9f45cbd3 KCA |
4585 | * |
4586 | * Issue SET FEATURES - SATA FEATURES command to device @dev | |
218f3d30 | 4587 | * on port @ap with sector count |
9f45cbd3 KCA |
4588 | * |
4589 | * LOCKING: | |
4590 | * PCI/etc. bus probe sem. | |
4591 | * | |
4592 | * RETURNS: | |
4593 | * 0 on success, AC_ERR_* mask otherwise. | |
4594 | */ | |
218f3d30 JG |
4595 | static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, |
4596 | u8 feature) | |
9f45cbd3 KCA |
4597 | { |
4598 | struct ata_taskfile tf; | |
4599 | unsigned int err_mask; | |
4600 | ||
4601 | /* set up set-features taskfile */ | |
4602 | DPRINTK("set features - SATA features\n"); | |
4603 | ||
4604 | ata_tf_init(dev, &tf); | |
4605 | tf.command = ATA_CMD_SET_FEATURES; | |
4606 | tf.feature = enable; | |
4607 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
4608 | tf.protocol = ATA_PROT_NODATA; | |
218f3d30 | 4609 | tf.nsect = feature; |
9f45cbd3 | 4610 | |
2b789108 | 4611 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
1da177e4 | 4612 | |
83206a29 TH |
4613 | DPRINTK("EXIT, err_mask=%x\n", err_mask); |
4614 | return err_mask; | |
1da177e4 LT |
4615 | } |
4616 | ||
8bf62ece AL |
4617 | /** |
4618 | * ata_dev_init_params - Issue INIT DEV PARAMS command | |
8bf62ece | 4619 | * @dev: Device to which command will be sent |
e2a7f77a RD |
4620 | * @heads: Number of heads (taskfile parameter) |
4621 | * @sectors: Number of sectors (taskfile parameter) | |
8bf62ece AL |
4622 | * |
4623 | * LOCKING: | |
6aff8f1f TH |
4624 | * Kernel thread context (may sleep) |
4625 | * | |
4626 | * RETURNS: | |
4627 | * 0 on success, AC_ERR_* mask otherwise. | |
8bf62ece | 4628 | */ |
3373efd8 TH |
4629 | static unsigned int ata_dev_init_params(struct ata_device *dev, |
4630 | u16 heads, u16 sectors) | |
8bf62ece | 4631 | { |
a0123703 | 4632 | struct ata_taskfile tf; |
6aff8f1f | 4633 | unsigned int err_mask; |
8bf62ece AL |
4634 | |
4635 | /* Number of sectors per track 1-255. Number of heads 1-16 */ | |
4636 | if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) | |
00b6f5e9 | 4637 | return AC_ERR_INVALID; |
8bf62ece AL |
4638 | |
4639 | /* set up init dev params taskfile */ | |
4640 | DPRINTK("init dev params \n"); | |
4641 | ||
3373efd8 | 4642 | ata_tf_init(dev, &tf); |
a0123703 TH |
4643 | tf.command = ATA_CMD_INIT_DEV_PARAMS; |
4644 | tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; | |
4645 | tf.protocol = ATA_PROT_NODATA; | |
4646 | tf.nsect = sectors; | |
4647 | tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ | |
8bf62ece | 4648 | |
2b789108 | 4649 | err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); |
18b2466c AC |
4650 | /* A clean abort indicates an original or just out of spec drive |
4651 | and we should continue as we issue the setup based on the | |
4652 | drive reported working geometry */ | |
4653 | if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) | |
4654 | err_mask = 0; | |
8bf62ece | 4655 | |
6aff8f1f TH |
4656 | DPRINTK("EXIT, err_mask=%x\n", err_mask); |
4657 | return err_mask; | |
8bf62ece AL |
4658 | } |
4659 | ||
1da177e4 | 4660 | /** |
0cba632b JG |
4661 | * ata_sg_clean - Unmap DMA memory associated with command |
4662 | * @qc: Command containing DMA memory to be released | |
4663 | * | |
4664 | * Unmap all mapped DMA memory associated with this command. | |
1da177e4 LT |
4665 | * |
4666 | * LOCKING: | |
cca3974e | 4667 | * spin_lock_irqsave(host lock) |
1da177e4 | 4668 | */ |
70e6ad0c | 4669 | void ata_sg_clean(struct ata_queued_cmd *qc) |
1da177e4 LT |
4670 | { |
4671 | struct ata_port *ap = qc->ap; | |
ff2aeb1e | 4672 | struct scatterlist *sg = qc->sg; |
1da177e4 LT |
4673 | int dir = qc->dma_dir; |
4674 | ||
efcb3cf7 | 4675 | WARN_ON_ONCE(sg == NULL); |
1da177e4 | 4676 | |
dde20207 | 4677 | VPRINTK("unmapping %u sg elements\n", qc->n_elem); |
1da177e4 | 4678 | |
dde20207 | 4679 | if (qc->n_elem) |
5825627c | 4680 | dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir); |
1da177e4 LT |
4681 | |
4682 | qc->flags &= ~ATA_QCFLAG_DMAMAP; | |
ff2aeb1e | 4683 | qc->sg = NULL; |
1da177e4 LT |
4684 | } |
4685 | ||
1da177e4 | 4686 | /** |
5895ef9a | 4687 | * atapi_check_dma - Check whether ATAPI DMA can be supported |
1da177e4 LT |
4688 | * @qc: Metadata associated with taskfile to check |
4689 | * | |
780a87f7 JG |
4690 | * Allow low-level driver to filter ATA PACKET commands, returning |
4691 | * a status indicating whether or not it is OK to use DMA for the | |
4692 | * supplied PACKET command. | |
4693 | * | |
1da177e4 | 4694 | * LOCKING: |
624d5c51 TH |
4695 | * spin_lock_irqsave(host lock) |
4696 | * | |
4697 | * RETURNS: 0 when ATAPI DMA can be used | |
4698 | * nonzero otherwise | |
4699 | */ | |
5895ef9a | 4700 | int atapi_check_dma(struct ata_queued_cmd *qc) |
624d5c51 TH |
4701 | { |
4702 | struct ata_port *ap = qc->ap; | |
71601958 | 4703 | |
624d5c51 TH |
4704 | /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a |
4705 | * few ATAPI devices choke on such DMA requests. | |
4706 | */ | |
6a87e42e TH |
4707 | if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) && |
4708 | unlikely(qc->nbytes & 15)) | |
624d5c51 | 4709 | return 1; |
e2cec771 | 4710 | |
624d5c51 TH |
4711 | if (ap->ops->check_atapi_dma) |
4712 | return ap->ops->check_atapi_dma(qc); | |
e2cec771 | 4713 | |
624d5c51 TH |
4714 | return 0; |
4715 | } | |
1da177e4 | 4716 | |
624d5c51 TH |
4717 | /** |
4718 | * ata_std_qc_defer - Check whether a qc needs to be deferred | |
4719 | * @qc: ATA command in question | |
4720 | * | |
4721 | * Non-NCQ commands cannot run with any other command, NCQ or | |
4722 | * not. As upper layer only knows the queue depth, we are | |
4723 | * responsible for maintaining exclusion. This function checks | |
4724 | * whether a new command @qc can be issued. | |
4725 | * | |
4726 | * LOCKING: | |
4727 | * spin_lock_irqsave(host lock) | |
4728 | * | |
4729 | * RETURNS: | |
4730 | * ATA_DEFER_* if deferring is needed, 0 otherwise. | |
4731 | */ | |
4732 | int ata_std_qc_defer(struct ata_queued_cmd *qc) | |
4733 | { | |
4734 | struct ata_link *link = qc->dev->link; | |
e2cec771 | 4735 | |
624d5c51 TH |
4736 | if (qc->tf.protocol == ATA_PROT_NCQ) { |
4737 | if (!ata_tag_valid(link->active_tag)) | |
4738 | return 0; | |
4739 | } else { | |
4740 | if (!ata_tag_valid(link->active_tag) && !link->sactive) | |
4741 | return 0; | |
4742 | } | |
e2cec771 | 4743 | |
624d5c51 TH |
4744 | return ATA_DEFER_LINK; |
4745 | } | |
6912ccd5 | 4746 | |
624d5c51 | 4747 | void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } |
1da177e4 | 4748 | |
624d5c51 TH |
4749 | /** |
4750 | * ata_sg_init - Associate command with scatter-gather table. | |
4751 | * @qc: Command to be associated | |
4752 | * @sg: Scatter-gather table. | |
4753 | * @n_elem: Number of elements in s/g table. | |
4754 | * | |
4755 | * Initialize the data-related elements of queued_cmd @qc | |
4756 | * to point to a scatter-gather table @sg, containing @n_elem | |
4757 | * elements. | |
4758 | * | |
4759 | * LOCKING: | |
4760 | * spin_lock_irqsave(host lock) | |
4761 | */ | |
4762 | void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, | |
4763 | unsigned int n_elem) | |
4764 | { | |
4765 | qc->sg = sg; | |
4766 | qc->n_elem = n_elem; | |
4767 | qc->cursg = qc->sg; | |
4768 | } | |
bb5cb290 | 4769 | |
624d5c51 TH |
4770 | /** |
4771 | * ata_sg_setup - DMA-map the scatter-gather table associated with a command. | |
4772 | * @qc: Command with scatter-gather table to be mapped. | |
4773 | * | |
4774 | * DMA-map the scatter-gather table associated with queued_cmd @qc. | |
4775 | * | |
4776 | * LOCKING: | |
4777 | * spin_lock_irqsave(host lock) | |
4778 | * | |
4779 | * RETURNS: | |
4780 | * Zero on success, negative on error. | |
4781 | * | |
4782 | */ | |
4783 | static int ata_sg_setup(struct ata_queued_cmd *qc) | |
4784 | { | |
4785 | struct ata_port *ap = qc->ap; | |
4786 | unsigned int n_elem; | |
1da177e4 | 4787 | |
624d5c51 | 4788 | VPRINTK("ENTER, ata%u\n", ap->print_id); |
e2cec771 | 4789 | |
624d5c51 TH |
4790 | n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir); |
4791 | if (n_elem < 1) | |
4792 | return -1; | |
bb5cb290 | 4793 | |
624d5c51 | 4794 | DPRINTK("%d sg elements mapped\n", n_elem); |
5825627c | 4795 | qc->orig_n_elem = qc->n_elem; |
624d5c51 TH |
4796 | qc->n_elem = n_elem; |
4797 | qc->flags |= ATA_QCFLAG_DMAMAP; | |
1da177e4 | 4798 | |
624d5c51 | 4799 | return 0; |
1da177e4 LT |
4800 | } |
4801 | ||
624d5c51 TH |
4802 | /** |
4803 | * swap_buf_le16 - swap halves of 16-bit words in place | |
4804 | * @buf: Buffer to swap | |
4805 | * @buf_words: Number of 16-bit words in buffer. | |
4806 | * | |
4807 | * Swap halves of 16-bit words if needed to convert from | |
4808 | * little-endian byte order to native cpu byte order, or | |
4809 | * vice-versa. | |
4810 | * | |
4811 | * LOCKING: | |
4812 | * Inherited from caller. | |
4813 | */ | |
4814 | void swap_buf_le16(u16 *buf, unsigned int buf_words) | |
8061f5f0 | 4815 | { |
624d5c51 TH |
4816 | #ifdef __BIG_ENDIAN |
4817 | unsigned int i; | |
8061f5f0 | 4818 | |
624d5c51 TH |
4819 | for (i = 0; i < buf_words; i++) |
4820 | buf[i] = le16_to_cpu(buf[i]); | |
4821 | #endif /* __BIG_ENDIAN */ | |
8061f5f0 TH |
4822 | } |
4823 | ||
8a8bc223 TH |
4824 | /** |
4825 | * ata_qc_new - Request an available ATA command, for queueing | |
5eb66fe0 | 4826 | * @ap: target port |
8a8bc223 TH |
4827 | * |
4828 | * LOCKING: | |
4829 | * None. | |
4830 | */ | |
4831 | ||
4832 | static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) | |
4833 | { | |
4834 | struct ata_queued_cmd *qc = NULL; | |
4835 | unsigned int i; | |
4836 | ||
4837 | /* no command while frozen */ | |
4838 | if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) | |
4839 | return NULL; | |
4840 | ||
4841 | /* the last tag is reserved for internal command. */ | |
4842 | for (i = 0; i < ATA_MAX_QUEUE - 1; i++) | |
4843 | if (!test_and_set_bit(i, &ap->qc_allocated)) { | |
4844 | qc = __ata_qc_from_tag(ap, i); | |
4845 | break; | |
4846 | } | |
4847 | ||
4848 | if (qc) | |
4849 | qc->tag = i; | |
4850 | ||
4851 | return qc; | |
4852 | } | |
4853 | ||
1da177e4 LT |
4854 | /** |
4855 | * ata_qc_new_init - Request an available ATA command, and initialize it | |
1da177e4 LT |
4856 | * @dev: Device from whom we request an available command structure |
4857 | * | |
4858 | * LOCKING: | |
0cba632b | 4859 | * None. |
1da177e4 LT |
4860 | */ |
4861 | ||
8a8bc223 | 4862 | struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) |
1da177e4 | 4863 | { |
9af5c9c9 | 4864 | struct ata_port *ap = dev->link->ap; |
1da177e4 LT |
4865 | struct ata_queued_cmd *qc; |
4866 | ||
8a8bc223 | 4867 | qc = ata_qc_new(ap); |
1da177e4 | 4868 | if (qc) { |
1da177e4 LT |
4869 | qc->scsicmd = NULL; |
4870 | qc->ap = ap; | |
4871 | qc->dev = dev; | |
1da177e4 | 4872 | |
2c13b7ce | 4873 | ata_qc_reinit(qc); |
1da177e4 LT |
4874 | } |
4875 | ||
4876 | return qc; | |
4877 | } | |
4878 | ||
8a8bc223 TH |
4879 | /** |
4880 | * ata_qc_free - free unused ata_queued_cmd | |
4881 | * @qc: Command to complete | |
4882 | * | |
4883 | * Designed to free unused ata_queued_cmd object | |
4884 | * in case something prevents using it. | |
4885 | * | |
4886 | * LOCKING: | |
4887 | * spin_lock_irqsave(host lock) | |
4888 | */ | |
4889 | void ata_qc_free(struct ata_queued_cmd *qc) | |
4890 | { | |
4891 | struct ata_port *ap = qc->ap; | |
4892 | unsigned int tag; | |
4893 | ||
efcb3cf7 | 4894 | WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ |
8a8bc223 TH |
4895 | |
4896 | qc->flags = 0; | |
4897 | tag = qc->tag; | |
4898 | if (likely(ata_tag_valid(tag))) { | |
4899 | qc->tag = ATA_TAG_POISON; | |
4900 | clear_bit(tag, &ap->qc_allocated); | |
4901 | } | |
4902 | } | |
4903 | ||
76014427 | 4904 | void __ata_qc_complete(struct ata_queued_cmd *qc) |
1da177e4 | 4905 | { |
dedaf2b0 | 4906 | struct ata_port *ap = qc->ap; |
9af5c9c9 | 4907 | struct ata_link *link = qc->dev->link; |
dedaf2b0 | 4908 | |
efcb3cf7 TH |
4909 | WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ |
4910 | WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); | |
1da177e4 LT |
4911 | |
4912 | if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) | |
4913 | ata_sg_clean(qc); | |
4914 | ||
7401abf2 | 4915 | /* command should be marked inactive atomically with qc completion */ |
da917d69 | 4916 | if (qc->tf.protocol == ATA_PROT_NCQ) { |
9af5c9c9 | 4917 | link->sactive &= ~(1 << qc->tag); |
da917d69 TH |
4918 | if (!link->sactive) |
4919 | ap->nr_active_links--; | |
4920 | } else { | |
9af5c9c9 | 4921 | link->active_tag = ATA_TAG_POISON; |
da917d69 TH |
4922 | ap->nr_active_links--; |
4923 | } | |
4924 | ||
4925 | /* clear exclusive status */ | |
4926 | if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL && | |
4927 | ap->excl_link == link)) | |
4928 | ap->excl_link = NULL; | |
7401abf2 | 4929 | |
3f3791d3 AL |
4930 | /* atapi: mark qc as inactive to prevent the interrupt handler |
4931 | * from completing the command twice later, before the error handler | |
4932 | * is called. (when rc != 0 and atapi request sense is needed) | |
4933 | */ | |
4934 | qc->flags &= ~ATA_QCFLAG_ACTIVE; | |
dedaf2b0 | 4935 | ap->qc_active &= ~(1 << qc->tag); |
3f3791d3 | 4936 | |
1da177e4 | 4937 | /* call completion callback */ |
77853bf2 | 4938 | qc->complete_fn(qc); |
1da177e4 LT |
4939 | } |
4940 | ||
39599a53 TH |
4941 | static void fill_result_tf(struct ata_queued_cmd *qc) |
4942 | { | |
4943 | struct ata_port *ap = qc->ap; | |
4944 | ||
39599a53 | 4945 | qc->result_tf.flags = qc->tf.flags; |
22183bf5 | 4946 | ap->ops->qc_fill_rtf(qc); |
39599a53 TH |
4947 | } |
4948 | ||
00115e0f TH |
4949 | static void ata_verify_xfer(struct ata_queued_cmd *qc) |
4950 | { | |
4951 | struct ata_device *dev = qc->dev; | |
4952 | ||
4953 | if (ata_tag_internal(qc->tag)) | |
4954 | return; | |
4955 | ||
4956 | if (ata_is_nodata(qc->tf.protocol)) | |
4957 | return; | |
4958 | ||
4959 | if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol)) | |
4960 | return; | |
4961 | ||
4962 | dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER; | |
4963 | } | |
4964 | ||
f686bcb8 TH |
4965 | /** |
4966 | * ata_qc_complete - Complete an active ATA command | |
4967 | * @qc: Command to complete | |
f686bcb8 TH |
4968 | * |
4969 | * Indicate to the mid and upper layers that an ATA | |
4970 | * command has completed, with either an ok or not-ok status. | |
4971 | * | |
4972 | * LOCKING: | |
cca3974e | 4973 | * spin_lock_irqsave(host lock) |
f686bcb8 TH |
4974 | */ |
4975 | void ata_qc_complete(struct ata_queued_cmd *qc) | |
4976 | { | |
4977 | struct ata_port *ap = qc->ap; | |
4978 | ||
4979 | /* XXX: New EH and old EH use different mechanisms to | |
4980 | * synchronize EH with regular execution path. | |
4981 | * | |
4982 | * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. | |
4983 | * Normal execution path is responsible for not accessing a | |
4984 | * failed qc. libata core enforces the rule by returning NULL | |
4985 | * from ata_qc_from_tag() for failed qcs. | |
4986 | * | |
4987 | * Old EH depends on ata_qc_complete() nullifying completion | |
4988 | * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does | |
4989 | * not synchronize with interrupt handler. Only PIO task is | |
4990 | * taken care of. | |
4991 | */ | |
4992 | if (ap->ops->error_handler) { | |
4dbfa39b TH |
4993 | struct ata_device *dev = qc->dev; |
4994 | struct ata_eh_info *ehi = &dev->link->eh_info; | |
4995 | ||
efcb3cf7 | 4996 | WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN); |
f686bcb8 TH |
4997 | |
4998 | if (unlikely(qc->err_mask)) | |
4999 | qc->flags |= ATA_QCFLAG_FAILED; | |
5000 | ||
5001 | if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { | |
5002 | if (!ata_tag_internal(qc->tag)) { | |
5003 | /* always fill result TF for failed qc */ | |
39599a53 | 5004 | fill_result_tf(qc); |
f686bcb8 TH |
5005 | ata_qc_schedule_eh(qc); |
5006 | return; | |
5007 | } | |
5008 | } | |
5009 | ||
5010 | /* read result TF if requested */ | |
5011 | if (qc->flags & ATA_QCFLAG_RESULT_TF) | |
39599a53 | 5012 | fill_result_tf(qc); |
f686bcb8 | 5013 | |
4dbfa39b TH |
5014 | /* Some commands need post-processing after successful |
5015 | * completion. | |
5016 | */ | |
5017 | switch (qc->tf.command) { | |
5018 | case ATA_CMD_SET_FEATURES: | |
5019 | if (qc->tf.feature != SETFEATURES_WC_ON && | |
5020 | qc->tf.feature != SETFEATURES_WC_OFF) | |
5021 | break; | |
5022 | /* fall through */ | |
5023 | case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */ | |
5024 | case ATA_CMD_SET_MULTI: /* multi_count changed */ | |
5025 | /* revalidate device */ | |
5026 | ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE; | |
5027 | ata_port_schedule_eh(ap); | |
5028 | break; | |
054a5fba TH |
5029 | |
5030 | case ATA_CMD_SLEEP: | |
5031 | dev->flags |= ATA_DFLAG_SLEEPING; | |
5032 | break; | |
4dbfa39b TH |
5033 | } |
5034 | ||
00115e0f TH |
5035 | if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) |
5036 | ata_verify_xfer(qc); | |
5037 | ||
f686bcb8 TH |
5038 | __ata_qc_complete(qc); |
5039 | } else { | |
5040 | if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) | |
5041 | return; | |
5042 | ||
5043 | /* read result TF if failed or requested */ | |
5044 | if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) | |
39599a53 | 5045 | fill_result_tf(qc); |
f686bcb8 TH |
5046 | |
5047 | __ata_qc_complete(qc); | |
5048 | } | |
5049 | } | |
5050 | ||
dedaf2b0 TH |
5051 | /** |
5052 | * ata_qc_complete_multiple - Complete multiple qcs successfully | |
5053 | * @ap: port in question | |
5054 | * @qc_active: new qc_active mask | |
dedaf2b0 TH |
5055 | * |
5056 | * Complete in-flight commands. This functions is meant to be | |
5057 | * called from low-level driver's interrupt routine to complete | |
5058 | * requests normally. ap->qc_active and @qc_active is compared | |
5059 | * and commands are completed accordingly. | |
5060 | * | |
5061 | * LOCKING: | |
cca3974e | 5062 | * spin_lock_irqsave(host lock) |
dedaf2b0 TH |
5063 | * |
5064 | * RETURNS: | |
5065 | * Number of completed commands on success, -errno otherwise. | |
5066 | */ | |
79f97dad | 5067 | int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) |
dedaf2b0 TH |
5068 | { |
5069 | int nr_done = 0; | |
5070 | u32 done_mask; | |
dedaf2b0 TH |
5071 | |
5072 | done_mask = ap->qc_active ^ qc_active; | |
5073 | ||
5074 | if (unlikely(done_mask & qc_active)) { | |
5075 | ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " | |
5076 | "(%08x->%08x)\n", ap->qc_active, qc_active); | |
5077 | return -EINVAL; | |
5078 | } | |
5079 | ||
43768180 | 5080 | while (done_mask) { |
dedaf2b0 | 5081 | struct ata_queued_cmd *qc; |
43768180 | 5082 | unsigned int tag = __ffs(done_mask); |
dedaf2b0 | 5083 | |
43768180 JA |
5084 | qc = ata_qc_from_tag(ap, tag); |
5085 | if (qc) { | |
dedaf2b0 TH |
5086 | ata_qc_complete(qc); |
5087 | nr_done++; | |
5088 | } | |
43768180 | 5089 | done_mask &= ~(1 << tag); |
dedaf2b0 TH |
5090 | } |
5091 | ||
5092 | return nr_done; | |
5093 | } | |
5094 | ||
1da177e4 LT |
5095 | /** |
5096 | * ata_qc_issue - issue taskfile to device | |
5097 | * @qc: command to issue to device | |
5098 | * | |
5099 | * Prepare an ATA command to submission to device. | |
5100 | * This includes mapping the data into a DMA-able | |
5101 | * area, filling in the S/G table, and finally | |
5102 | * writing the taskfile to hardware, starting the command. | |
5103 | * | |
5104 | * LOCKING: | |
cca3974e | 5105 | * spin_lock_irqsave(host lock) |
1da177e4 | 5106 | */ |
8e0e694a | 5107 | void ata_qc_issue(struct ata_queued_cmd *qc) |
1da177e4 LT |
5108 | { |
5109 | struct ata_port *ap = qc->ap; | |
9af5c9c9 | 5110 | struct ata_link *link = qc->dev->link; |
405e66b3 | 5111 | u8 prot = qc->tf.protocol; |
1da177e4 | 5112 | |
dedaf2b0 TH |
5113 | /* Make sure only one non-NCQ command is outstanding. The |
5114 | * check is skipped for old EH because it reuses active qc to | |
5115 | * request ATAPI sense. | |
5116 | */ | |
efcb3cf7 | 5117 | WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag)); |
dedaf2b0 | 5118 | |
1973a023 | 5119 | if (ata_is_ncq(prot)) { |
efcb3cf7 | 5120 | WARN_ON_ONCE(link->sactive & (1 << qc->tag)); |
da917d69 TH |
5121 | |
5122 | if (!link->sactive) | |
5123 | ap->nr_active_links++; | |
9af5c9c9 | 5124 | link->sactive |= 1 << qc->tag; |
dedaf2b0 | 5125 | } else { |
efcb3cf7 | 5126 | WARN_ON_ONCE(link->sactive); |
da917d69 TH |
5127 | |
5128 | ap->nr_active_links++; | |
9af5c9c9 | 5129 | link->active_tag = qc->tag; |
dedaf2b0 TH |
5130 | } |
5131 | ||
e4a70e76 | 5132 | qc->flags |= ATA_QCFLAG_ACTIVE; |
dedaf2b0 | 5133 | ap->qc_active |= 1 << qc->tag; |
e4a70e76 | 5134 | |
f92a2636 TH |
5135 | /* We guarantee to LLDs that they will have at least one |
5136 | * non-zero sg if the command is a data command. | |
5137 | */ | |
ff2aeb1e | 5138 | BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes)); |
f92a2636 | 5139 | |
405e66b3 | 5140 | if (ata_is_dma(prot) || (ata_is_pio(prot) && |
f92a2636 | 5141 | (ap->flags & ATA_FLAG_PIO_DMA))) |
001102d7 TH |
5142 | if (ata_sg_setup(qc)) |
5143 | goto sg_err; | |
1da177e4 | 5144 | |
cf480626 | 5145 | /* if device is sleeping, schedule reset and abort the link */ |
054a5fba | 5146 | if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { |
cf480626 | 5147 | link->eh_info.action |= ATA_EH_RESET; |
054a5fba TH |
5148 | ata_ehi_push_desc(&link->eh_info, "waking up from sleep"); |
5149 | ata_link_abort(link); | |
5150 | return; | |
5151 | } | |
5152 | ||
1da177e4 LT |
5153 | ap->ops->qc_prep(qc); |
5154 | ||
8e0e694a TH |
5155 | qc->err_mask |= ap->ops->qc_issue(qc); |
5156 | if (unlikely(qc->err_mask)) | |
5157 | goto err; | |
5158 | return; | |
1da177e4 | 5159 | |
8e436af9 | 5160 | sg_err: |
8e0e694a TH |
5161 | qc->err_mask |= AC_ERR_SYSTEM; |
5162 | err: | |
5163 | ata_qc_complete(qc); | |
1da177e4 LT |
5164 | } |
5165 | ||
34bf2170 TH |
5166 | /** |
5167 | * sata_scr_valid - test whether SCRs are accessible | |
936fd732 | 5168 | * @link: ATA link to test SCR accessibility for |
34bf2170 | 5169 | * |
936fd732 | 5170 | * Test whether SCRs are accessible for @link. |
34bf2170 TH |
5171 | * |
5172 | * LOCKING: | |
5173 | * None. | |
5174 | * | |
5175 | * RETURNS: | |
5176 | * 1 if SCRs are accessible, 0 otherwise. | |
5177 | */ | |
936fd732 | 5178 | int sata_scr_valid(struct ata_link *link) |
34bf2170 | 5179 | { |
936fd732 TH |
5180 | struct ata_port *ap = link->ap; |
5181 | ||
a16abc0b | 5182 | return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; |
34bf2170 TH |
5183 | } |
5184 | ||
5185 | /** | |
5186 | * sata_scr_read - read SCR register of the specified port | |
936fd732 | 5187 | * @link: ATA link to read SCR for |
34bf2170 TH |
5188 | * @reg: SCR to read |
5189 | * @val: Place to store read value | |
5190 | * | |
936fd732 | 5191 | * Read SCR register @reg of @link into *@val. This function is |
633273a3 TH |
5192 | * guaranteed to succeed if @link is ap->link, the cable type of |
5193 | * the port is SATA and the port implements ->scr_read. | |
34bf2170 TH |
5194 | * |
5195 | * LOCKING: | |
633273a3 | 5196 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
5197 | * |
5198 | * RETURNS: | |
5199 | * 0 on success, negative errno on failure. | |
5200 | */ | |
936fd732 | 5201 | int sata_scr_read(struct ata_link *link, int reg, u32 *val) |
34bf2170 | 5202 | { |
633273a3 | 5203 | if (ata_is_host_link(link)) { |
633273a3 | 5204 | if (sata_scr_valid(link)) |
82ef04fb | 5205 | return link->ap->ops->scr_read(link, reg, val); |
633273a3 TH |
5206 | return -EOPNOTSUPP; |
5207 | } | |
5208 | ||
5209 | return sata_pmp_scr_read(link, reg, val); | |
34bf2170 TH |
5210 | } |
5211 | ||
5212 | /** | |
5213 | * sata_scr_write - write SCR register of the specified port | |
936fd732 | 5214 | * @link: ATA link to write SCR for |
34bf2170 TH |
5215 | * @reg: SCR to write |
5216 | * @val: value to write | |
5217 | * | |
936fd732 | 5218 | * Write @val to SCR register @reg of @link. This function is |
633273a3 TH |
5219 | * guaranteed to succeed if @link is ap->link, the cable type of |
5220 | * the port is SATA and the port implements ->scr_read. | |
34bf2170 TH |
5221 | * |
5222 | * LOCKING: | |
633273a3 | 5223 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
5224 | * |
5225 | * RETURNS: | |
5226 | * 0 on success, negative errno on failure. | |
5227 | */ | |
936fd732 | 5228 | int sata_scr_write(struct ata_link *link, int reg, u32 val) |
34bf2170 | 5229 | { |
633273a3 | 5230 | if (ata_is_host_link(link)) { |
633273a3 | 5231 | if (sata_scr_valid(link)) |
82ef04fb | 5232 | return link->ap->ops->scr_write(link, reg, val); |
633273a3 TH |
5233 | return -EOPNOTSUPP; |
5234 | } | |
936fd732 | 5235 | |
633273a3 | 5236 | return sata_pmp_scr_write(link, reg, val); |
34bf2170 TH |
5237 | } |
5238 | ||
5239 | /** | |
5240 | * sata_scr_write_flush - write SCR register of the specified port and flush | |
936fd732 | 5241 | * @link: ATA link to write SCR for |
34bf2170 TH |
5242 | * @reg: SCR to write |
5243 | * @val: value to write | |
5244 | * | |
5245 | * This function is identical to sata_scr_write() except that this | |
5246 | * function performs flush after writing to the register. | |
5247 | * | |
5248 | * LOCKING: | |
633273a3 | 5249 | * None if @link is ap->link. Kernel thread context otherwise. |
34bf2170 TH |
5250 | * |
5251 | * RETURNS: | |
5252 | * 0 on success, negative errno on failure. | |
5253 | */ | |
936fd732 | 5254 | int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) |
34bf2170 | 5255 | { |
633273a3 | 5256 | if (ata_is_host_link(link)) { |
633273a3 | 5257 | int rc; |
da3dbb17 | 5258 | |
633273a3 | 5259 | if (sata_scr_valid(link)) { |
82ef04fb | 5260 | rc = link->ap->ops->scr_write(link, reg, val); |
633273a3 | 5261 | if (rc == 0) |
82ef04fb | 5262 | rc = link->ap->ops->scr_read(link, reg, &val); |
633273a3 TH |
5263 | return rc; |
5264 | } | |
5265 | return -EOPNOTSUPP; | |
34bf2170 | 5266 | } |
633273a3 TH |
5267 | |
5268 | return sata_pmp_scr_write(link, reg, val); | |
34bf2170 TH |
5269 | } |
5270 | ||
5271 | /** | |
b1c72916 | 5272 | * ata_phys_link_online - test whether the given link is online |
936fd732 | 5273 | * @link: ATA link to test |
34bf2170 | 5274 | * |
936fd732 TH |
5275 | * Test whether @link is online. Note that this function returns |
5276 | * 0 if online status of @link cannot be obtained, so | |
5277 | * ata_link_online(link) != !ata_link_offline(link). | |
34bf2170 TH |
5278 | * |
5279 | * LOCKING: | |
5280 | * None. | |
5281 | * | |
5282 | * RETURNS: | |
b5b3fa38 | 5283 | * True if the port online status is available and online. |
34bf2170 | 5284 | */ |
b1c72916 | 5285 | bool ata_phys_link_online(struct ata_link *link) |
34bf2170 TH |
5286 | { |
5287 | u32 sstatus; | |
5288 | ||
936fd732 | 5289 | if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && |
9913ff8a | 5290 | ata_sstatus_online(sstatus)) |
b5b3fa38 TH |
5291 | return true; |
5292 | return false; | |
34bf2170 TH |
5293 | } |
5294 | ||
5295 | /** | |
b1c72916 | 5296 | * ata_phys_link_offline - test whether the given link is offline |
936fd732 | 5297 | * @link: ATA link to test |
34bf2170 | 5298 | * |
936fd732 TH |
5299 | * Test whether @link is offline. Note that this function |
5300 | * returns 0 if offline status of @link cannot be obtained, so | |
5301 | * ata_link_online(link) != !ata_link_offline(link). | |
34bf2170 TH |
5302 | * |
5303 | * LOCKING: | |
5304 | * None. | |
5305 | * | |
5306 | * RETURNS: | |
b5b3fa38 | 5307 | * True if the port offline status is available and offline. |
34bf2170 | 5308 | */ |
b1c72916 | 5309 | bool ata_phys_link_offline(struct ata_link *link) |
34bf2170 TH |
5310 | { |
5311 | u32 sstatus; | |
5312 | ||
936fd732 | 5313 | if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && |
9913ff8a | 5314 | !ata_sstatus_online(sstatus)) |
b5b3fa38 TH |
5315 | return true; |
5316 | return false; | |
34bf2170 | 5317 | } |
0baab86b | 5318 | |
b1c72916 TH |
5319 | /** |
5320 | * ata_link_online - test whether the given link is online | |
5321 | * @link: ATA link to test | |
5322 | * | |
5323 | * Test whether @link is online. This is identical to | |
5324 | * ata_phys_link_online() when there's no slave link. When | |
5325 | * there's a slave link, this function should only be called on | |
5326 | * the master link and will return true if any of M/S links is | |
5327 | * online. | |
5328 | * | |
5329 | * LOCKING: | |
5330 | * None. | |
5331 | * | |
5332 | * RETURNS: | |
5333 | * True if the port online status is available and online. | |
5334 | */ | |
5335 | bool ata_link_online(struct ata_link *link) | |
5336 | { | |
5337 | struct ata_link *slave = link->ap->slave_link; | |
5338 | ||
5339 | WARN_ON(link == slave); /* shouldn't be called on slave link */ | |
5340 | ||
5341 | return ata_phys_link_online(link) || | |
5342 | (slave && ata_phys_link_online(slave)); | |
5343 | } | |
5344 | ||
5345 | /** | |
5346 | * ata_link_offline - test whether the given link is offline | |
5347 | * @link: ATA link to test | |
5348 | * | |
5349 | * Test whether @link is offline. This is identical to | |
5350 | * ata_phys_link_offline() when there's no slave link. When | |
5351 | * there's a slave link, this function should only be called on | |
5352 | * the master link and will return true if both M/S links are | |
5353 | * offline. | |
5354 | * | |
5355 | * LOCKING: | |
5356 | * None. | |
5357 | * | |
5358 | * RETURNS: | |
5359 | * True if the port offline status is available and offline. | |
5360 | */ | |
5361 | bool ata_link_offline(struct ata_link *link) | |
5362 | { | |
5363 | struct ata_link *slave = link->ap->slave_link; | |
5364 | ||
5365 | WARN_ON(link == slave); /* shouldn't be called on slave link */ | |
5366 | ||
5367 | return ata_phys_link_offline(link) && | |
5368 | (!slave || ata_phys_link_offline(slave)); | |
5369 | } | |
5370 | ||
6ffa01d8 | 5371 | #ifdef CONFIG_PM |
cca3974e JG |
5372 | static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, |
5373 | unsigned int action, unsigned int ehi_flags, | |
5374 | int wait) | |
500530f6 TH |
5375 | { |
5376 | unsigned long flags; | |
5377 | int i, rc; | |
5378 | ||
cca3974e JG |
5379 | for (i = 0; i < host->n_ports; i++) { |
5380 | struct ata_port *ap = host->ports[i]; | |
e3667ebf | 5381 | struct ata_link *link; |
500530f6 TH |
5382 | |
5383 | /* Previous resume operation might still be in | |
5384 | * progress. Wait for PM_PENDING to clear. | |
5385 | */ | |
5386 | if (ap->pflags & ATA_PFLAG_PM_PENDING) { | |
5387 | ata_port_wait_eh(ap); | |
5388 | WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); | |
5389 | } | |
5390 | ||
5391 | /* request PM ops to EH */ | |
5392 | spin_lock_irqsave(ap->lock, flags); | |
5393 | ||
5394 | ap->pm_mesg = mesg; | |
5395 | if (wait) { | |
5396 | rc = 0; | |
5397 | ap->pm_result = &rc; | |
5398 | } | |
5399 | ||
5400 | ap->pflags |= ATA_PFLAG_PM_PENDING; | |
1eca4365 | 5401 | ata_for_each_link(link, ap, HOST_FIRST) { |
e3667ebf TH |
5402 | link->eh_info.action |= action; |
5403 | link->eh_info.flags |= ehi_flags; | |
5404 | } | |
500530f6 TH |
5405 | |
5406 | ata_port_schedule_eh(ap); | |
5407 | ||
5408 | spin_unlock_irqrestore(ap->lock, flags); | |
5409 | ||
5410 | /* wait and check result */ | |
5411 | if (wait) { | |
5412 | ata_port_wait_eh(ap); | |
5413 | WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); | |
5414 | if (rc) | |
5415 | return rc; | |
5416 | } | |
5417 | } | |
5418 | ||
5419 | return 0; | |
5420 | } | |
5421 | ||
5422 | /** | |
cca3974e JG |
5423 | * ata_host_suspend - suspend host |
5424 | * @host: host to suspend | |
500530f6 TH |
5425 | * @mesg: PM message |
5426 | * | |
cca3974e | 5427 | * Suspend @host. Actual operation is performed by EH. This |
500530f6 TH |
5428 | * function requests EH to perform PM operations and waits for EH |
5429 | * to finish. | |
5430 | * | |
5431 | * LOCKING: | |
5432 | * Kernel thread context (may sleep). | |
5433 | * | |
5434 | * RETURNS: | |
5435 | * 0 on success, -errno on failure. | |
5436 | */ | |
cca3974e | 5437 | int ata_host_suspend(struct ata_host *host, pm_message_t mesg) |
500530f6 | 5438 | { |
9666f400 | 5439 | int rc; |
500530f6 | 5440 | |
ca77329f KCA |
5441 | /* |
5442 | * disable link pm on all ports before requesting | |
5443 | * any pm activity | |
5444 | */ | |
5445 | ata_lpm_enable(host); | |
5446 | ||
cca3974e | 5447 | rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); |
72ad6ec4 JG |
5448 | if (rc == 0) |
5449 | host->dev->power.power_state = mesg; | |
500530f6 TH |
5450 | return rc; |
5451 | } | |
5452 | ||
5453 | /** | |
cca3974e JG |
5454 | * ata_host_resume - resume host |
5455 | * @host: host to resume | |
500530f6 | 5456 | * |
cca3974e | 5457 | * Resume @host. Actual operation is performed by EH. This |
500530f6 TH |
5458 | * function requests EH to perform PM operations and returns. |
5459 | * Note that all resume operations are performed parallely. | |
5460 | * | |
5461 | * LOCKING: | |
5462 | * Kernel thread context (may sleep). | |
5463 | */ | |
cca3974e | 5464 | void ata_host_resume(struct ata_host *host) |
500530f6 | 5465 | { |
cf480626 | 5466 | ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET, |
cca3974e | 5467 | ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); |
72ad6ec4 | 5468 | host->dev->power.power_state = PMSG_ON; |
ca77329f KCA |
5469 | |
5470 | /* reenable link pm */ | |
5471 | ata_lpm_disable(host); | |
500530f6 | 5472 | } |
6ffa01d8 | 5473 | #endif |
500530f6 | 5474 | |
c893a3ae RD |
5475 | /** |
5476 | * ata_port_start - Set port up for dma. | |
5477 | * @ap: Port to initialize | |
5478 | * | |
5479 | * Called just after data structures for each port are | |
5480 | * initialized. Allocates space for PRD table. | |
5481 | * | |
5482 | * May be used as the port_start() entry in ata_port_operations. | |
5483 | * | |
5484 | * LOCKING: | |
5485 | * Inherited from caller. | |
5486 | */ | |
f0d36efd | 5487 | int ata_port_start(struct ata_port *ap) |
1da177e4 | 5488 | { |
2f1f610b | 5489 | struct device *dev = ap->dev; |
1da177e4 | 5490 | |
f0d36efd TH |
5491 | ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, |
5492 | GFP_KERNEL); | |
1da177e4 LT |
5493 | if (!ap->prd) |
5494 | return -ENOMEM; | |
5495 | ||
1da177e4 LT |
5496 | return 0; |
5497 | } | |
5498 | ||
3ef3b43d TH |
5499 | /** |
5500 | * ata_dev_init - Initialize an ata_device structure | |
5501 | * @dev: Device structure to initialize | |
5502 | * | |
5503 | * Initialize @dev in preparation for probing. | |
5504 | * | |
5505 | * LOCKING: | |
5506 | * Inherited from caller. | |
5507 | */ | |
5508 | void ata_dev_init(struct ata_device *dev) | |
5509 | { | |
b1c72916 | 5510 | struct ata_link *link = ata_dev_phys_link(dev); |
9af5c9c9 | 5511 | struct ata_port *ap = link->ap; |
72fa4b74 TH |
5512 | unsigned long flags; |
5513 | ||
b1c72916 | 5514 | /* SATA spd limit is bound to the attached device, reset together */ |
9af5c9c9 TH |
5515 | link->sata_spd_limit = link->hw_sata_spd_limit; |
5516 | link->sata_spd = 0; | |
5a04bf4b | 5517 | |
72fa4b74 TH |
5518 | /* High bits of dev->flags are used to record warm plug |
5519 | * requests which occur asynchronously. Synchronize using | |
cca3974e | 5520 | * host lock. |
72fa4b74 | 5521 | */ |
ba6a1308 | 5522 | spin_lock_irqsave(ap->lock, flags); |
72fa4b74 | 5523 | dev->flags &= ~ATA_DFLAG_INIT_MASK; |
3dcc323f | 5524 | dev->horkage = 0; |
ba6a1308 | 5525 | spin_unlock_irqrestore(ap->lock, flags); |
3ef3b43d | 5526 | |
99cf610a TH |
5527 | memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0, |
5528 | ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN); | |
3ef3b43d TH |
5529 | dev->pio_mask = UINT_MAX; |
5530 | dev->mwdma_mask = UINT_MAX; | |
5531 | dev->udma_mask = UINT_MAX; | |
5532 | } | |
5533 | ||
4fb37a25 TH |
5534 | /** |
5535 | * ata_link_init - Initialize an ata_link structure | |
5536 | * @ap: ATA port link is attached to | |
5537 | * @link: Link structure to initialize | |
8989805d | 5538 | * @pmp: Port multiplier port number |
4fb37a25 TH |
5539 | * |
5540 | * Initialize @link. | |
5541 | * | |
5542 | * LOCKING: | |
5543 | * Kernel thread context (may sleep) | |
5544 | */ | |
fb7fd614 | 5545 | void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) |
4fb37a25 TH |
5546 | { |
5547 | int i; | |
5548 | ||
5549 | /* clear everything except for devices */ | |
5550 | memset(link, 0, offsetof(struct ata_link, device[0])); | |
5551 | ||
5552 | link->ap = ap; | |
8989805d | 5553 | link->pmp = pmp; |
4fb37a25 TH |
5554 | link->active_tag = ATA_TAG_POISON; |
5555 | link->hw_sata_spd_limit = UINT_MAX; | |
5556 | ||
5557 | /* can't use iterator, ap isn't initialized yet */ | |
5558 | for (i = 0; i < ATA_MAX_DEVICES; i++) { | |
5559 | struct ata_device *dev = &link->device[i]; | |
5560 | ||
5561 | dev->link = link; | |
5562 | dev->devno = dev - link->device; | |
5563 | ata_dev_init(dev); | |
5564 | } | |
5565 | } | |
5566 | ||
5567 | /** | |
5568 | * sata_link_init_spd - Initialize link->sata_spd_limit | |
5569 | * @link: Link to configure sata_spd_limit for | |
5570 | * | |
5571 | * Initialize @link->[hw_]sata_spd_limit to the currently | |
5572 | * configured value. | |
5573 | * | |
5574 | * LOCKING: | |
5575 | * Kernel thread context (may sleep). | |
5576 | * | |
5577 | * RETURNS: | |
5578 | * 0 on success, -errno on failure. | |
5579 | */ | |
fb7fd614 | 5580 | int sata_link_init_spd(struct ata_link *link) |
4fb37a25 | 5581 | { |
33267325 | 5582 | u8 spd; |
4fb37a25 TH |
5583 | int rc; |
5584 | ||
d127ea7b | 5585 | rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol); |
4fb37a25 TH |
5586 | if (rc) |
5587 | return rc; | |
5588 | ||
d127ea7b | 5589 | spd = (link->saved_scontrol >> 4) & 0xf; |
4fb37a25 TH |
5590 | if (spd) |
5591 | link->hw_sata_spd_limit &= (1 << spd) - 1; | |
5592 | ||
05944bdf | 5593 | ata_force_link_limits(link); |
33267325 | 5594 | |
4fb37a25 TH |
5595 | link->sata_spd_limit = link->hw_sata_spd_limit; |
5596 | ||
5597 | return 0; | |
5598 | } | |
5599 | ||
1da177e4 | 5600 | /** |
f3187195 TH |
5601 | * ata_port_alloc - allocate and initialize basic ATA port resources |
5602 | * @host: ATA host this allocated port belongs to | |
1da177e4 | 5603 | * |
f3187195 TH |
5604 | * Allocate and initialize basic ATA port resources. |
5605 | * | |
5606 | * RETURNS: | |
5607 | * Allocate ATA port on success, NULL on failure. | |
0cba632b | 5608 | * |
1da177e4 | 5609 | * LOCKING: |
f3187195 | 5610 | * Inherited from calling layer (may sleep). |
1da177e4 | 5611 | */ |
f3187195 | 5612 | struct ata_port *ata_port_alloc(struct ata_host *host) |
1da177e4 | 5613 | { |
f3187195 | 5614 | struct ata_port *ap; |
1da177e4 | 5615 | |
f3187195 TH |
5616 | DPRINTK("ENTER\n"); |
5617 | ||
5618 | ap = kzalloc(sizeof(*ap), GFP_KERNEL); | |
5619 | if (!ap) | |
5620 | return NULL; | |
5621 | ||
f4d6d004 | 5622 | ap->pflags |= ATA_PFLAG_INITIALIZING; |
cca3974e | 5623 | ap->lock = &host->lock; |
198e0fed | 5624 | ap->flags = ATA_FLAG_DISABLED; |
f3187195 | 5625 | ap->print_id = -1; |
1da177e4 | 5626 | ap->ctl = ATA_DEVCTL_OBS; |
cca3974e | 5627 | ap->host = host; |
f3187195 | 5628 | ap->dev = host->dev; |
1da177e4 | 5629 | ap->last_ctl = 0xFF; |
bd5d825c BP |
5630 | |
5631 | #if defined(ATA_VERBOSE_DEBUG) | |
5632 | /* turn on all debugging levels */ | |
5633 | ap->msg_enable = 0x00FF; | |
5634 | #elif defined(ATA_DEBUG) | |
5635 | ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; | |
88574551 | 5636 | #else |
0dd4b21f | 5637 | ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; |
bd5d825c | 5638 | #endif |
1da177e4 | 5639 | |
127102ae | 5640 | #ifdef CONFIG_ATA_SFF |
442eacc3 | 5641 | INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); |
f667fdbb TH |
5642 | #else |
5643 | INIT_DELAYED_WORK(&ap->port_task, NULL); | |
127102ae | 5644 | #endif |
65f27f38 DH |
5645 | INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); |
5646 | INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); | |
a72ec4ce | 5647 | INIT_LIST_HEAD(&ap->eh_done_q); |
c6cf9e99 | 5648 | init_waitqueue_head(&ap->eh_wait_q); |
45fabbb7 | 5649 | init_completion(&ap->park_req_pending); |
5ddf24c5 TH |
5650 | init_timer_deferrable(&ap->fastdrain_timer); |
5651 | ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn; | |
5652 | ap->fastdrain_timer.data = (unsigned long)ap; | |
1da177e4 | 5653 | |
838df628 | 5654 | ap->cbl = ATA_CBL_NONE; |
838df628 | 5655 | |
8989805d | 5656 | ata_link_init(ap, &ap->link, 0); |
1da177e4 LT |
5657 | |
5658 | #ifdef ATA_IRQ_TRAP | |
5659 | ap->stats.unhandled_irq = 1; | |
5660 | ap->stats.idle_irq = 1; | |
5661 | #endif | |
1da177e4 | 5662 | return ap; |
1da177e4 LT |
5663 | } |
5664 | ||
f0d36efd TH |
5665 | static void ata_host_release(struct device *gendev, void *res) |
5666 | { | |
5667 | struct ata_host *host = dev_get_drvdata(gendev); | |
5668 | int i; | |
5669 | ||
1aa506e4 TH |
5670 | for (i = 0; i < host->n_ports; i++) { |
5671 | struct ata_port *ap = host->ports[i]; | |
5672 | ||
4911487a TH |
5673 | if (!ap) |
5674 | continue; | |
5675 | ||
5676 | if (ap->scsi_host) | |
1aa506e4 TH |
5677 | scsi_host_put(ap->scsi_host); |
5678 | ||
633273a3 | 5679 | kfree(ap->pmp_link); |
b1c72916 | 5680 | kfree(ap->slave_link); |
4911487a | 5681 | kfree(ap); |
1aa506e4 TH |
5682 | host->ports[i] = NULL; |
5683 | } | |
5684 | ||
1aa56cca | 5685 | dev_set_drvdata(gendev, NULL); |
f0d36efd TH |
5686 | } |
5687 | ||
f3187195 TH |
5688 | /** |
5689 | * ata_host_alloc - allocate and init basic ATA host resources | |
5690 | * @dev: generic device this host is associated with | |
5691 | * @max_ports: maximum number of ATA ports associated with this host | |
5692 | * | |
5693 | * Allocate and initialize basic ATA host resources. LLD calls | |
5694 | * this function to allocate a host, initializes it fully and | |
5695 | * attaches it using ata_host_register(). | |
5696 | * | |
5697 | * @max_ports ports are allocated and host->n_ports is | |
5698 | * initialized to @max_ports. The caller is allowed to decrease | |
5699 | * host->n_ports before calling ata_host_register(). The unused | |
5700 | * ports will be automatically freed on registration. | |
5701 | * | |
5702 | * RETURNS: | |
5703 | * Allocate ATA host on success, NULL on failure. | |
5704 | * | |
5705 | * LOCKING: | |
5706 | * Inherited from calling layer (may sleep). | |
5707 | */ | |
5708 | struct ata_host *ata_host_alloc(struct device *dev, int max_ports) | |
5709 | { | |
5710 | struct ata_host *host; | |
5711 | size_t sz; | |
5712 | int i; | |
5713 | ||
5714 | DPRINTK("ENTER\n"); | |
5715 | ||
5716 | if (!devres_open_group(dev, NULL, GFP_KERNEL)) | |
5717 | return NULL; | |
5718 | ||
5719 | /* alloc a container for our list of ATA ports (buses) */ | |
5720 | sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *); | |
5721 | /* alloc a container for our list of ATA ports (buses) */ | |
5722 | host = devres_alloc(ata_host_release, sz, GFP_KERNEL); | |
5723 | if (!host) | |
5724 | goto err_out; | |
5725 | ||
5726 | devres_add(dev, host); | |
5727 | dev_set_drvdata(dev, host); | |
5728 | ||
5729 | spin_lock_init(&host->lock); | |
5730 | host->dev = dev; | |
5731 | host->n_ports = max_ports; | |
5732 | ||
5733 | /* allocate ports bound to this host */ | |
5734 | for (i = 0; i < max_ports; i++) { | |
5735 | struct ata_port *ap; | |
5736 | ||
5737 | ap = ata_port_alloc(host); | |
5738 | if (!ap) | |
5739 | goto err_out; | |
5740 | ||
5741 | ap->port_no = i; | |
5742 | host->ports[i] = ap; | |
5743 | } | |
5744 | ||
5745 | devres_remove_group(dev, NULL); | |
5746 | return host; | |
5747 | ||
5748 | err_out: | |
5749 | devres_release_group(dev, NULL); | |
5750 | return NULL; | |
5751 | } | |
5752 | ||
f5cda257 TH |
5753 | /** |
5754 | * ata_host_alloc_pinfo - alloc host and init with port_info array | |
5755 | * @dev: generic device this host is associated with | |
5756 | * @ppi: array of ATA port_info to initialize host with | |
5757 | * @n_ports: number of ATA ports attached to this host | |
5758 | * | |
5759 | * Allocate ATA host and initialize with info from @ppi. If NULL | |
5760 | * terminated, @ppi may contain fewer entries than @n_ports. The | |
5761 | * last entry will be used for the remaining ports. | |
5762 | * | |
5763 | * RETURNS: | |
5764 | * Allocate ATA host on success, NULL on failure. | |
5765 | * | |
5766 | * LOCKING: | |
5767 | * Inherited from calling layer (may sleep). | |
5768 | */ | |
5769 | struct ata_host *ata_host_alloc_pinfo(struct device *dev, | |
5770 | const struct ata_port_info * const * ppi, | |
5771 | int n_ports) | |
5772 | { | |
5773 | const struct ata_port_info *pi; | |
5774 | struct ata_host *host; | |
5775 | int i, j; | |
5776 | ||
5777 | host = ata_host_alloc(dev, n_ports); | |
5778 | if (!host) | |
5779 | return NULL; | |
5780 | ||
5781 | for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) { | |
5782 | struct ata_port *ap = host->ports[i]; | |
5783 | ||
5784 | if (ppi[j]) | |
5785 | pi = ppi[j++]; | |
5786 | ||
5787 | ap->pio_mask = pi->pio_mask; | |
5788 | ap->mwdma_mask = pi->mwdma_mask; | |
5789 | ap->udma_mask = pi->udma_mask; | |
5790 | ap->flags |= pi->flags; | |
0c88758b | 5791 | ap->link.flags |= pi->link_flags; |
f5cda257 TH |
5792 | ap->ops = pi->port_ops; |
5793 | ||
5794 | if (!host->ops && (pi->port_ops != &ata_dummy_port_ops)) | |
5795 | host->ops = pi->port_ops; | |
f5cda257 TH |
5796 | } |
5797 | ||
5798 | return host; | |
5799 | } | |
5800 | ||
b1c72916 TH |
5801 | /** |
5802 | * ata_slave_link_init - initialize slave link | |
5803 | * @ap: port to initialize slave link for | |
5804 | * | |
5805 | * Create and initialize slave link for @ap. This enables slave | |
5806 | * link handling on the port. | |
5807 | * | |
5808 | * In libata, a port contains links and a link contains devices. | |
5809 | * There is single host link but if a PMP is attached to it, | |
5810 | * there can be multiple fan-out links. On SATA, there's usually | |
5811 | * a single device connected to a link but PATA and SATA | |
5812 | * controllers emulating TF based interface can have two - master | |
5813 | * and slave. | |
5814 | * | |
5815 | * However, there are a few controllers which don't fit into this | |
5816 | * abstraction too well - SATA controllers which emulate TF | |
5817 | * interface with both master and slave devices but also have | |
5818 | * separate SCR register sets for each device. These controllers | |
5819 | * need separate links for physical link handling | |
5820 | * (e.g. onlineness, link speed) but should be treated like a | |
5821 | * traditional M/S controller for everything else (e.g. command | |
5822 | * issue, softreset). | |
5823 | * | |
5824 | * slave_link is libata's way of handling this class of | |
5825 | * controllers without impacting core layer too much. For | |
5826 | * anything other than physical link handling, the default host | |
5827 | * link is used for both master and slave. For physical link | |
5828 | * handling, separate @ap->slave_link is used. All dirty details | |
5829 | * are implemented inside libata core layer. From LLD's POV, the | |
5830 | * only difference is that prereset, hardreset and postreset are | |
5831 | * called once more for the slave link, so the reset sequence | |
5832 | * looks like the following. | |
5833 | * | |
5834 | * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> | |
5835 | * softreset(M) -> postreset(M) -> postreset(S) | |
5836 | * | |
5837 | * Note that softreset is called only for the master. Softreset | |
5838 | * resets both M/S by definition, so SRST on master should handle | |
5839 | * both (the standard method will work just fine). | |
5840 | * | |
5841 | * LOCKING: | |
5842 | * Should be called before host is registered. | |
5843 | * | |
5844 | * RETURNS: | |
5845 | * 0 on success, -errno on failure. | |
5846 | */ | |
5847 | int ata_slave_link_init(struct ata_port *ap) | |
5848 | { | |
5849 | struct ata_link *link; | |
5850 | ||
5851 | WARN_ON(ap->slave_link); | |
5852 | WARN_ON(ap->flags & ATA_FLAG_PMP); | |
5853 | ||
5854 | link = kzalloc(sizeof(*link), GFP_KERNEL); | |
5855 | if (!link) | |
5856 | return -ENOMEM; | |
5857 | ||
5858 | ata_link_init(ap, link, 1); | |
5859 | ap->slave_link = link; | |
5860 | return 0; | |
5861 | } | |
5862 | ||
32ebbc0c TH |
5863 | static void ata_host_stop(struct device *gendev, void *res) |
5864 | { | |
5865 | struct ata_host *host = dev_get_drvdata(gendev); | |
5866 | int i; | |
5867 | ||
5868 | WARN_ON(!(host->flags & ATA_HOST_STARTED)); | |
5869 | ||
5870 | for (i = 0; i < host->n_ports; i++) { | |
5871 | struct ata_port *ap = host->ports[i]; | |
5872 | ||
5873 | if (ap->ops->port_stop) | |
5874 | ap->ops->port_stop(ap); | |
5875 | } | |
5876 | ||
5877 | if (host->ops->host_stop) | |
5878 | host->ops->host_stop(host); | |
5879 | } | |
5880 | ||
029cfd6b TH |
5881 | /** |
5882 | * ata_finalize_port_ops - finalize ata_port_operations | |
5883 | * @ops: ata_port_operations to finalize | |
5884 | * | |
5885 | * An ata_port_operations can inherit from another ops and that | |
5886 | * ops can again inherit from another. This can go on as many | |
5887 | * times as necessary as long as there is no loop in the | |
5888 | * inheritance chain. | |
5889 | * | |
5890 | * Ops tables are finalized when the host is started. NULL or | |
5891 | * unspecified entries are inherited from the closet ancestor | |
5892 | * which has the method and the entry is populated with it. | |
5893 | * After finalization, the ops table directly points to all the | |
5894 | * methods and ->inherits is no longer necessary and cleared. | |
5895 | * | |
5896 | * Using ATA_OP_NULL, inheriting ops can force a method to NULL. | |
5897 | * | |
5898 | * LOCKING: | |
5899 | * None. | |
5900 | */ | |
5901 | static void ata_finalize_port_ops(struct ata_port_operations *ops) | |
5902 | { | |
2da67659 | 5903 | static DEFINE_SPINLOCK(lock); |
029cfd6b TH |
5904 | const struct ata_port_operations *cur; |
5905 | void **begin = (void **)ops; | |
5906 | void **end = (void **)&ops->inherits; | |
5907 | void **pp; | |
5908 | ||
5909 | if (!ops || !ops->inherits) | |
5910 | return; | |
5911 | ||
5912 | spin_lock(&lock); | |
5913 | ||
5914 | for (cur = ops->inherits; cur; cur = cur->inherits) { | |
5915 | void **inherit = (void **)cur; | |
5916 | ||
5917 | for (pp = begin; pp < end; pp++, inherit++) | |
5918 | if (!*pp) | |
5919 | *pp = *inherit; | |
5920 | } | |
5921 | ||
5922 | for (pp = begin; pp < end; pp++) | |
5923 | if (IS_ERR(*pp)) | |
5924 | *pp = NULL; | |
5925 | ||
5926 | ops->inherits = NULL; | |
5927 | ||
5928 | spin_unlock(&lock); | |
5929 | } | |
5930 | ||
ecef7253 TH |
5931 | /** |
5932 | * ata_host_start - start and freeze ports of an ATA host | |
5933 | * @host: ATA host to start ports for | |
5934 | * | |
5935 | * Start and then freeze ports of @host. Started status is | |
5936 | * recorded in host->flags, so this function can be called | |
5937 | * multiple times. Ports are guaranteed to get started only | |
f3187195 TH |
5938 | * once. If host->ops isn't initialized yet, its set to the |
5939 | * first non-dummy port ops. | |
ecef7253 TH |
5940 | * |
5941 | * LOCKING: | |
5942 | * Inherited from calling layer (may sleep). | |
5943 | * | |
5944 | * RETURNS: | |
5945 | * 0 if all ports are started successfully, -errno otherwise. | |
5946 | */ | |
5947 | int ata_host_start(struct ata_host *host) | |
5948 | { | |
32ebbc0c TH |
5949 | int have_stop = 0; |
5950 | void *start_dr = NULL; | |
ecef7253 TH |
5951 | int i, rc; |
5952 | ||
5953 | if (host->flags & ATA_HOST_STARTED) | |
5954 | return 0; | |
5955 | ||
029cfd6b TH |
5956 | ata_finalize_port_ops(host->ops); |
5957 | ||
ecef7253 TH |
5958 | for (i = 0; i < host->n_ports; i++) { |
5959 | struct ata_port *ap = host->ports[i]; | |
5960 | ||
029cfd6b TH |
5961 | ata_finalize_port_ops(ap->ops); |
5962 | ||
f3187195 TH |
5963 | if (!host->ops && !ata_port_is_dummy(ap)) |
5964 | host->ops = ap->ops; | |
5965 | ||
32ebbc0c TH |
5966 | if (ap->ops->port_stop) |
5967 | have_stop = 1; | |
5968 | } | |
5969 | ||
5970 | if (host->ops->host_stop) | |
5971 | have_stop = 1; | |
5972 | ||
5973 | if (have_stop) { | |
5974 | start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL); | |
5975 | if (!start_dr) | |
5976 | return -ENOMEM; | |
5977 | } | |
5978 | ||
5979 | for (i = 0; i < host->n_ports; i++) { | |
5980 | struct ata_port *ap = host->ports[i]; | |
5981 | ||
ecef7253 TH |
5982 | if (ap->ops->port_start) { |
5983 | rc = ap->ops->port_start(ap); | |
5984 | if (rc) { | |
0f9fe9b7 | 5985 | if (rc != -ENODEV) |
0f757743 AM |
5986 | dev_printk(KERN_ERR, host->dev, |
5987 | "failed to start port %d " | |
5988 | "(errno=%d)\n", i, rc); | |
ecef7253 TH |
5989 | goto err_out; |
5990 | } | |
5991 | } | |
ecef7253 TH |
5992 | ata_eh_freeze_port(ap); |
5993 | } | |
5994 | ||
32ebbc0c TH |
5995 | if (start_dr) |
5996 | devres_add(host->dev, start_dr); | |
ecef7253 TH |
5997 | host->flags |= ATA_HOST_STARTED; |
5998 | return 0; | |
5999 | ||
6000 | err_out: | |
6001 | while (--i >= 0) { | |
6002 | struct ata_port *ap = host->ports[i]; | |
6003 | ||
6004 | if (ap->ops->port_stop) | |
6005 | ap->ops->port_stop(ap); | |
6006 | } | |
32ebbc0c | 6007 | devres_free(start_dr); |
ecef7253 TH |
6008 | return rc; |
6009 | } | |
6010 | ||
b03732f0 | 6011 | /** |
cca3974e JG |
6012 | * ata_sas_host_init - Initialize a host struct |
6013 | * @host: host to initialize | |
6014 | * @dev: device host is attached to | |
6015 | * @flags: host flags | |
6016 | * @ops: port_ops | |
b03732f0 BK |
6017 | * |
6018 | * LOCKING: | |
6019 | * PCI/etc. bus probe sem. | |
6020 | * | |
6021 | */ | |
f3187195 | 6022 | /* KILLME - the only user left is ipr */ |
cca3974e | 6023 | void ata_host_init(struct ata_host *host, struct device *dev, |
029cfd6b | 6024 | unsigned long flags, struct ata_port_operations *ops) |
b03732f0 | 6025 | { |
cca3974e JG |
6026 | spin_lock_init(&host->lock); |
6027 | host->dev = dev; | |
6028 | host->flags = flags; | |
6029 | host->ops = ops; | |
b03732f0 BK |
6030 | } |
6031 | ||
79318057 AV |
6032 | |
6033 | static void async_port_probe(void *data, async_cookie_t cookie) | |
6034 | { | |
6035 | int rc; | |
6036 | struct ata_port *ap = data; | |
886ad09f AV |
6037 | |
6038 | /* | |
6039 | * If we're not allowed to scan this host in parallel, | |
6040 | * we need to wait until all previous scans have completed | |
6041 | * before going further. | |
fa853a48 AV |
6042 | * Jeff Garzik says this is only within a controller, so we |
6043 | * don't need to wait for port 0, only for later ports. | |
886ad09f | 6044 | */ |
fa853a48 | 6045 | if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0) |
886ad09f AV |
6046 | async_synchronize_cookie(cookie); |
6047 | ||
79318057 AV |
6048 | /* probe */ |
6049 | if (ap->ops->error_handler) { | |
6050 | struct ata_eh_info *ehi = &ap->link.eh_info; | |
6051 | unsigned long flags; | |
6052 | ||
6053 | ata_port_probe(ap); | |
6054 | ||
6055 | /* kick EH for boot probing */ | |
6056 | spin_lock_irqsave(ap->lock, flags); | |
6057 | ||
6058 | ehi->probe_mask |= ATA_ALL_DEVICES; | |
6059 | ehi->action |= ATA_EH_RESET | ATA_EH_LPM; | |
6060 | ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; | |
6061 | ||
6062 | ap->pflags &= ~ATA_PFLAG_INITIALIZING; | |
6063 | ap->pflags |= ATA_PFLAG_LOADING; | |
6064 | ata_port_schedule_eh(ap); | |
6065 | ||
6066 | spin_unlock_irqrestore(ap->lock, flags); | |
6067 | ||
6068 | /* wait for EH to finish */ | |
6069 | ata_port_wait_eh(ap); | |
6070 | } else { | |
6071 | DPRINTK("ata%u: bus probe begin\n", ap->print_id); | |
6072 | rc = ata_bus_probe(ap); | |
6073 | DPRINTK("ata%u: bus probe end\n", ap->print_id); | |
6074 | ||
6075 | if (rc) { | |
6076 | /* FIXME: do something useful here? | |
6077 | * Current libata behavior will | |
6078 | * tear down everything when | |
6079 | * the module is removed | |
6080 | * or the h/w is unplugged. | |
6081 | */ | |
6082 | } | |
6083 | } | |
f29d3b23 AV |
6084 | |
6085 | /* in order to keep device order, we need to synchronize at this point */ | |
6086 | async_synchronize_cookie(cookie); | |
6087 | ||
6088 | ata_scsi_scan_host(ap, 1); | |
6089 | ||
79318057 | 6090 | } |
f3187195 TH |
6091 | /** |
6092 | * ata_host_register - register initialized ATA host | |
6093 | * @host: ATA host to register | |
6094 | * @sht: template for SCSI host | |
6095 | * | |
6096 | * Register initialized ATA host. @host is allocated using | |
6097 | * ata_host_alloc() and fully initialized by LLD. This function | |
6098 | * starts ports, registers @host with ATA and SCSI layers and | |
6099 | * probe registered devices. | |
6100 | * | |
6101 | * LOCKING: | |
6102 | * Inherited from calling layer (may sleep). | |
6103 | * | |
6104 | * RETURNS: | |
6105 | * 0 on success, -errno otherwise. | |
6106 | */ | |
6107 | int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) | |
6108 | { | |
6109 | int i, rc; | |
6110 | ||
6111 | /* host must have been started */ | |
6112 | if (!(host->flags & ATA_HOST_STARTED)) { | |
6113 | dev_printk(KERN_ERR, host->dev, | |
6114 | "BUG: trying to register unstarted host\n"); | |
6115 | WARN_ON(1); | |
6116 | return -EINVAL; | |
6117 | } | |
6118 | ||
6119 | /* Blow away unused ports. This happens when LLD can't | |
6120 | * determine the exact number of ports to allocate at | |
6121 | * allocation time. | |
6122 | */ | |
6123 | for (i = host->n_ports; host->ports[i]; i++) | |
6124 | kfree(host->ports[i]); | |
6125 | ||
6126 | /* give ports names and add SCSI hosts */ | |
6127 | for (i = 0; i < host->n_ports; i++) | |
6128 | host->ports[i]->print_id = ata_print_id++; | |
6129 | ||
6130 | rc = ata_scsi_add_hosts(host, sht); | |
6131 | if (rc) | |
6132 | return rc; | |
6133 | ||
fafbae87 TH |
6134 | /* associate with ACPI nodes */ |
6135 | ata_acpi_associate(host); | |
6136 | ||
f3187195 TH |
6137 | /* set cable, sata_spd_limit and report */ |
6138 | for (i = 0; i < host->n_ports; i++) { | |
6139 | struct ata_port *ap = host->ports[i]; | |
f3187195 TH |
6140 | unsigned long xfer_mask; |
6141 | ||
6142 | /* set SATA cable type if still unset */ | |
6143 | if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA)) | |
6144 | ap->cbl = ATA_CBL_SATA; | |
6145 | ||
6146 | /* init sata_spd_limit to the current value */ | |
4fb37a25 | 6147 | sata_link_init_spd(&ap->link); |
b1c72916 TH |
6148 | if (ap->slave_link) |
6149 | sata_link_init_spd(ap->slave_link); | |
f3187195 | 6150 | |
cbcdd875 | 6151 | /* print per-port info to dmesg */ |
f3187195 TH |
6152 | xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, |
6153 | ap->udma_mask); | |
6154 | ||
abf6e8ed | 6155 | if (!ata_port_is_dummy(ap)) { |
cbcdd875 TH |
6156 | ata_port_printk(ap, KERN_INFO, |
6157 | "%cATA max %s %s\n", | |
a16abc0b | 6158 | (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', |
f3187195 | 6159 | ata_mode_string(xfer_mask), |
cbcdd875 | 6160 | ap->link.eh_info.desc); |
abf6e8ed TH |
6161 | ata_ehi_clear_desc(&ap->link.eh_info); |
6162 | } else | |
f3187195 TH |
6163 | ata_port_printk(ap, KERN_INFO, "DUMMY\n"); |
6164 | } | |
6165 | ||
f6005354 | 6166 | /* perform each probe asynchronously */ |
f3187195 TH |
6167 | for (i = 0; i < host->n_ports; i++) { |
6168 | struct ata_port *ap = host->ports[i]; | |
79318057 | 6169 | async_schedule(async_port_probe, ap); |
f3187195 | 6170 | } |
f3187195 TH |
6171 | |
6172 | return 0; | |
6173 | } | |
6174 | ||
f5cda257 TH |
6175 | /** |
6176 | * ata_host_activate - start host, request IRQ and register it | |
6177 | * @host: target ATA host | |
6178 | * @irq: IRQ to request | |
6179 | * @irq_handler: irq_handler used when requesting IRQ | |
6180 | * @irq_flags: irq_flags used when requesting IRQ | |
6181 | * @sht: scsi_host_template to use when registering the host | |
6182 | * | |
6183 | * After allocating an ATA host and initializing it, most libata | |
6184 | * LLDs perform three steps to activate the host - start host, | |
6185 | * request IRQ and register it. This helper takes necessasry | |
6186 | * arguments and performs the three steps in one go. | |
6187 | * | |
3d46b2e2 PM |
6188 | * An invalid IRQ skips the IRQ registration and expects the host to |
6189 | * have set polling mode on the port. In this case, @irq_handler | |
6190 | * should be NULL. | |
6191 | * | |
f5cda257 TH |
6192 | * LOCKING: |
6193 | * Inherited from calling layer (may sleep). | |
6194 | * | |
6195 | * RETURNS: | |
6196 | * 0 on success, -errno otherwise. | |
6197 | */ | |
6198 | int ata_host_activate(struct ata_host *host, int irq, | |
6199 | irq_handler_t irq_handler, unsigned long irq_flags, | |
6200 | struct scsi_host_template *sht) | |
6201 | { | |
cbcdd875 | 6202 | int i, rc; |
f5cda257 TH |
6203 | |
6204 | rc = ata_host_start(host); | |
6205 | if (rc) | |
6206 | return rc; | |
6207 | ||
3d46b2e2 PM |
6208 | /* Special case for polling mode */ |
6209 | if (!irq) { | |
6210 | WARN_ON(irq_handler); | |
6211 | return ata_host_register(host, sht); | |
6212 | } | |
6213 | ||
f5cda257 TH |
6214 | rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags, |
6215 | dev_driver_string(host->dev), host); | |
6216 | if (rc) | |
6217 | return rc; | |
6218 | ||
cbcdd875 TH |
6219 | for (i = 0; i < host->n_ports; i++) |
6220 | ata_port_desc(host->ports[i], "irq %d", irq); | |
4031826b | 6221 | |
f5cda257 TH |
6222 | rc = ata_host_register(host, sht); |
6223 | /* if failed, just free the IRQ and leave ports alone */ | |
6224 | if (rc) | |
6225 | devm_free_irq(host->dev, irq, host); | |
6226 | ||
6227 | return rc; | |
6228 | } | |
6229 | ||
720ba126 TH |
6230 | /** |
6231 | * ata_port_detach - Detach ATA port in prepration of device removal | |
6232 | * @ap: ATA port to be detached | |
6233 | * | |
6234 | * Detach all ATA devices and the associated SCSI devices of @ap; | |
6235 | * then, remove the associated SCSI host. @ap is guaranteed to | |
6236 | * be quiescent on return from this function. | |
6237 | * | |
6238 | * LOCKING: | |
6239 | * Kernel thread context (may sleep). | |
6240 | */ | |
741b7763 | 6241 | static void ata_port_detach(struct ata_port *ap) |
720ba126 TH |
6242 | { |
6243 | unsigned long flags; | |
720ba126 TH |
6244 | |
6245 | if (!ap->ops->error_handler) | |
c3cf30a9 | 6246 | goto skip_eh; |
720ba126 TH |
6247 | |
6248 | /* tell EH we're leaving & flush EH */ | |
ba6a1308 | 6249 | spin_lock_irqsave(ap->lock, flags); |
b51e9e5d | 6250 | ap->pflags |= ATA_PFLAG_UNLOADING; |
ece180d1 | 6251 | ata_port_schedule_eh(ap); |
ba6a1308 | 6252 | spin_unlock_irqrestore(ap->lock, flags); |
720ba126 | 6253 | |
ece180d1 | 6254 | /* wait till EH commits suicide */ |
720ba126 TH |
6255 | ata_port_wait_eh(ap); |
6256 | ||
ece180d1 TH |
6257 | /* it better be dead now */ |
6258 | WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED)); | |
720ba126 | 6259 | |
45a66c1c | 6260 | cancel_rearming_delayed_work(&ap->hotplug_task); |
720ba126 | 6261 | |
c3cf30a9 | 6262 | skip_eh: |
720ba126 | 6263 | /* remove the associated SCSI host */ |
cca3974e | 6264 | scsi_remove_host(ap->scsi_host); |
720ba126 TH |
6265 | } |
6266 | ||
0529c159 TH |
6267 | /** |
6268 | * ata_host_detach - Detach all ports of an ATA host | |
6269 | * @host: Host to detach | |
6270 | * | |
6271 | * Detach all ports of @host. | |
6272 | * | |
6273 | * LOCKING: | |
6274 | * Kernel thread context (may sleep). | |
6275 | */ | |
6276 | void ata_host_detach(struct ata_host *host) | |
6277 | { | |
6278 | int i; | |
6279 | ||
6280 | for (i = 0; i < host->n_ports; i++) | |
6281 | ata_port_detach(host->ports[i]); | |
562f0c2d TH |
6282 | |
6283 | /* the host is dead now, dissociate ACPI */ | |
6284 | ata_acpi_dissociate(host); | |
0529c159 TH |
6285 | } |
6286 | ||
374b1873 JG |
6287 | #ifdef CONFIG_PCI |
6288 | ||
1da177e4 LT |
6289 | /** |
6290 | * ata_pci_remove_one - PCI layer callback for device removal | |
6291 | * @pdev: PCI device that was removed | |
6292 | * | |
b878ca5d TH |
6293 | * PCI layer indicates to libata via this hook that hot-unplug or |
6294 | * module unload event has occurred. Detach all ports. Resource | |
6295 | * release is handled via devres. | |
1da177e4 LT |
6296 | * |
6297 | * LOCKING: | |
6298 | * Inherited from PCI layer (may sleep). | |
6299 | */ | |
f0d36efd | 6300 | void ata_pci_remove_one(struct pci_dev *pdev) |
1da177e4 | 6301 | { |
2855568b | 6302 | struct device *dev = &pdev->dev; |
cca3974e | 6303 | struct ata_host *host = dev_get_drvdata(dev); |
1da177e4 | 6304 | |
b878ca5d | 6305 | ata_host_detach(host); |
1da177e4 LT |
6306 | } |
6307 | ||
6308 | /* move to PCI subsystem */ | |
057ace5e | 6309 | int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) |
1da177e4 LT |
6310 | { |
6311 | unsigned long tmp = 0; | |
6312 | ||
6313 | switch (bits->width) { | |
6314 | case 1: { | |
6315 | u8 tmp8 = 0; | |
6316 | pci_read_config_byte(pdev, bits->reg, &tmp8); | |
6317 | tmp = tmp8; | |
6318 | break; | |
6319 | } | |
6320 | case 2: { | |
6321 | u16 tmp16 = 0; | |
6322 | pci_read_config_word(pdev, bits->reg, &tmp16); | |
6323 | tmp = tmp16; | |
6324 | break; | |
6325 | } | |
6326 | case 4: { | |
6327 | u32 tmp32 = 0; | |
6328 | pci_read_config_dword(pdev, bits->reg, &tmp32); | |
6329 | tmp = tmp32; | |
6330 | break; | |
6331 | } | |
6332 | ||
6333 | default: | |
6334 | return -EINVAL; | |
6335 | } | |
6336 | ||
6337 | tmp &= bits->mask; | |
6338 | ||
6339 | return (tmp == bits->val) ? 1 : 0; | |
6340 | } | |
9b847548 | 6341 | |
6ffa01d8 | 6342 | #ifdef CONFIG_PM |
3c5100c1 | 6343 | void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) |
9b847548 JA |
6344 | { |
6345 | pci_save_state(pdev); | |
4c90d971 | 6346 | pci_disable_device(pdev); |
500530f6 | 6347 | |
3a2d5b70 | 6348 | if (mesg.event & PM_EVENT_SLEEP) |
500530f6 | 6349 | pci_set_power_state(pdev, PCI_D3hot); |
9b847548 JA |
6350 | } |
6351 | ||
553c4aa6 | 6352 | int ata_pci_device_do_resume(struct pci_dev *pdev) |
9b847548 | 6353 | { |
553c4aa6 TH |
6354 | int rc; |
6355 | ||
9b847548 JA |
6356 | pci_set_power_state(pdev, PCI_D0); |
6357 | pci_restore_state(pdev); | |
553c4aa6 | 6358 | |
b878ca5d | 6359 | rc = pcim_enable_device(pdev); |
553c4aa6 TH |
6360 | if (rc) { |
6361 | dev_printk(KERN_ERR, &pdev->dev, | |
6362 | "failed to enable device after resume (%d)\n", rc); | |
6363 | return rc; | |
6364 | } | |
6365 | ||
9b847548 | 6366 | pci_set_master(pdev); |
553c4aa6 | 6367 | return 0; |
500530f6 TH |
6368 | } |
6369 | ||
3c5100c1 | 6370 | int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) |
500530f6 | 6371 | { |
cca3974e | 6372 | struct ata_host *host = dev_get_drvdata(&pdev->dev); |
500530f6 TH |
6373 | int rc = 0; |
6374 | ||
cca3974e | 6375 | rc = ata_host_suspend(host, mesg); |
500530f6 TH |
6376 | if (rc) |
6377 | return rc; | |
6378 | ||
3c5100c1 | 6379 | ata_pci_device_do_suspend(pdev, mesg); |
500530f6 TH |
6380 | |
6381 | return 0; | |
6382 | } | |
6383 | ||
6384 | int ata_pci_device_resume(struct pci_dev *pdev) | |
6385 | { | |
cca3974e | 6386 | struct ata_host *host = dev_get_drvdata(&pdev->dev); |
553c4aa6 | 6387 | int rc; |
500530f6 | 6388 | |
553c4aa6 TH |
6389 | rc = ata_pci_device_do_resume(pdev); |
6390 | if (rc == 0) | |
6391 | ata_host_resume(host); | |
6392 | return rc; | |
9b847548 | 6393 | } |
6ffa01d8 TH |
6394 | #endif /* CONFIG_PM */ |
6395 | ||
1da177e4 LT |
6396 | #endif /* CONFIG_PCI */ |
6397 | ||
33267325 TH |
6398 | static int __init ata_parse_force_one(char **cur, |
6399 | struct ata_force_ent *force_ent, | |
6400 | const char **reason) | |
6401 | { | |
6402 | /* FIXME: Currently, there's no way to tag init const data and | |
6403 | * using __initdata causes build failure on some versions of | |
6404 | * gcc. Once __initdataconst is implemented, add const to the | |
6405 | * following structure. | |
6406 | */ | |
6407 | static struct ata_force_param force_tbl[] __initdata = { | |
6408 | { "40c", .cbl = ATA_CBL_PATA40 }, | |
6409 | { "80c", .cbl = ATA_CBL_PATA80 }, | |
6410 | { "short40c", .cbl = ATA_CBL_PATA40_SHORT }, | |
6411 | { "unk", .cbl = ATA_CBL_PATA_UNK }, | |
6412 | { "ign", .cbl = ATA_CBL_PATA_IGN }, | |
6413 | { "sata", .cbl = ATA_CBL_SATA }, | |
6414 | { "1.5Gbps", .spd_limit = 1 }, | |
6415 | { "3.0Gbps", .spd_limit = 2 }, | |
6416 | { "noncq", .horkage_on = ATA_HORKAGE_NONCQ }, | |
6417 | { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, | |
6418 | { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, | |
6419 | { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, | |
6420 | { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) }, | |
6421 | { "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) }, | |
6422 | { "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) }, | |
6423 | { "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) }, | |
6424 | { "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) }, | |
6425 | { "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) }, | |
6426 | { "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) }, | |
6427 | { "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) }, | |
6428 | { "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) }, | |
6429 | { "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) }, | |
6430 | { "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
6431 | { "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
6432 | { "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) }, | |
6433 | { "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
6434 | { "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
6435 | { "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) }, | |
6436 | { "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
6437 | { "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
6438 | { "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) }, | |
6439 | { "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
6440 | { "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
6441 | { "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) }, | |
6442 | { "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
6443 | { "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
6444 | { "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) }, | |
6445 | { "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
6446 | { "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
6447 | { "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) }, | |
6448 | { "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
6449 | { "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
6450 | { "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) }, | |
6451 | { "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) }, | |
05944bdf TH |
6452 | { "nohrst", .lflags = ATA_LFLAG_NO_HRST }, |
6453 | { "nosrst", .lflags = ATA_LFLAG_NO_SRST }, | |
6454 | { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, | |
33267325 TH |
6455 | }; |
6456 | char *start = *cur, *p = *cur; | |
6457 | char *id, *val, *endp; | |
6458 | const struct ata_force_param *match_fp = NULL; | |
6459 | int nr_matches = 0, i; | |
6460 | ||
6461 | /* find where this param ends and update *cur */ | |
6462 | while (*p != '\0' && *p != ',') | |
6463 | p++; | |
6464 | ||
6465 | if (*p == '\0') | |
6466 | *cur = p; | |
6467 | else | |
6468 | *cur = p + 1; | |
6469 | ||
6470 | *p = '\0'; | |
6471 | ||
6472 | /* parse */ | |
6473 | p = strchr(start, ':'); | |
6474 | if (!p) { | |
6475 | val = strstrip(start); | |
6476 | goto parse_val; | |
6477 | } | |
6478 | *p = '\0'; | |
6479 | ||
6480 | id = strstrip(start); | |
6481 | val = strstrip(p + 1); | |
6482 | ||
6483 | /* parse id */ | |
6484 | p = strchr(id, '.'); | |
6485 | if (p) { | |
6486 | *p++ = '\0'; | |
6487 | force_ent->device = simple_strtoul(p, &endp, 10); | |
6488 | if (p == endp || *endp != '\0') { | |
6489 | *reason = "invalid device"; | |
6490 | return -EINVAL; | |
6491 | } | |
6492 | } | |
6493 | ||
6494 | force_ent->port = simple_strtoul(id, &endp, 10); | |
6495 | if (p == endp || *endp != '\0') { | |
6496 | *reason = "invalid port/link"; | |
6497 | return -EINVAL; | |
6498 | } | |
6499 | ||
6500 | parse_val: | |
6501 | /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */ | |
6502 | for (i = 0; i < ARRAY_SIZE(force_tbl); i++) { | |
6503 | const struct ata_force_param *fp = &force_tbl[i]; | |
6504 | ||
6505 | if (strncasecmp(val, fp->name, strlen(val))) | |
6506 | continue; | |
6507 | ||
6508 | nr_matches++; | |
6509 | match_fp = fp; | |
6510 | ||
6511 | if (strcasecmp(val, fp->name) == 0) { | |
6512 | nr_matches = 1; | |
6513 | break; | |
6514 | } | |
6515 | } | |
6516 | ||
6517 | if (!nr_matches) { | |
6518 | *reason = "unknown value"; | |
6519 | return -EINVAL; | |
6520 | } | |
6521 | if (nr_matches > 1) { | |
6522 | *reason = "ambigious value"; | |
6523 | return -EINVAL; | |
6524 | } | |
6525 | ||
6526 | force_ent->param = *match_fp; | |
6527 | ||
6528 | return 0; | |
6529 | } | |
6530 | ||
6531 | static void __init ata_parse_force_param(void) | |
6532 | { | |
6533 | int idx = 0, size = 1; | |
6534 | int last_port = -1, last_device = -1; | |
6535 | char *p, *cur, *next; | |
6536 | ||
6537 | /* calculate maximum number of params and allocate force_tbl */ | |
6538 | for (p = ata_force_param_buf; *p; p++) | |
6539 | if (*p == ',') | |
6540 | size++; | |
6541 | ||
6542 | ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL); | |
6543 | if (!ata_force_tbl) { | |
6544 | printk(KERN_WARNING "ata: failed to extend force table, " | |
6545 | "libata.force ignored\n"); | |
6546 | return; | |
6547 | } | |
6548 | ||
6549 | /* parse and populate the table */ | |
6550 | for (cur = ata_force_param_buf; *cur != '\0'; cur = next) { | |
6551 | const char *reason = ""; | |
6552 | struct ata_force_ent te = { .port = -1, .device = -1 }; | |
6553 | ||
6554 | next = cur; | |
6555 | if (ata_parse_force_one(&next, &te, &reason)) { | |
6556 | printk(KERN_WARNING "ata: failed to parse force " | |
6557 | "parameter \"%s\" (%s)\n", | |
6558 | cur, reason); | |
6559 | continue; | |
6560 | } | |
6561 | ||
6562 | if (te.port == -1) { | |
6563 | te.port = last_port; | |
6564 | te.device = last_device; | |
6565 | } | |
6566 | ||
6567 | ata_force_tbl[idx++] = te; | |
6568 | ||
6569 | last_port = te.port; | |
6570 | last_device = te.device; | |
6571 | } | |
6572 | ||
6573 | ata_force_tbl_size = idx; | |
6574 | } | |
1da177e4 | 6575 | |
1da177e4 LT |
6576 | static int __init ata_init(void) |
6577 | { | |
33267325 TH |
6578 | ata_parse_force_param(); |
6579 | ||
1da177e4 LT |
6580 | ata_wq = create_workqueue("ata"); |
6581 | if (!ata_wq) | |
49ea3b04 | 6582 | goto free_force_tbl; |
1da177e4 | 6583 | |
453b07ac | 6584 | ata_aux_wq = create_singlethread_workqueue("ata_aux"); |
49ea3b04 EO |
6585 | if (!ata_aux_wq) |
6586 | goto free_wq; | |
453b07ac | 6587 | |
1da177e4 LT |
6588 | printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); |
6589 | return 0; | |
49ea3b04 EO |
6590 | |
6591 | free_wq: | |
6592 | destroy_workqueue(ata_wq); | |
6593 | free_force_tbl: | |
6594 | kfree(ata_force_tbl); | |
6595 | return -ENOMEM; | |
1da177e4 LT |
6596 | } |
6597 | ||
6598 | static void __exit ata_exit(void) | |
6599 | { | |
33267325 | 6600 | kfree(ata_force_tbl); |
1da177e4 | 6601 | destroy_workqueue(ata_wq); |
453b07ac | 6602 | destroy_workqueue(ata_aux_wq); |
1da177e4 LT |
6603 | } |
6604 | ||
a4625085 | 6605 | subsys_initcall(ata_init); |
1da177e4 LT |
6606 | module_exit(ata_exit); |
6607 | ||
67846b30 | 6608 | static unsigned long ratelimit_time; |
34af946a | 6609 | static DEFINE_SPINLOCK(ata_ratelimit_lock); |
67846b30 JG |
6610 | |
6611 | int ata_ratelimit(void) | |
6612 | { | |
6613 | int rc; | |
6614 | unsigned long flags; | |
6615 | ||
6616 | spin_lock_irqsave(&ata_ratelimit_lock, flags); | |
6617 | ||
6618 | if (time_after(jiffies, ratelimit_time)) { | |
6619 | rc = 1; | |
6620 | ratelimit_time = jiffies + (HZ/5); | |
6621 | } else | |
6622 | rc = 0; | |
6623 | ||
6624 | spin_unlock_irqrestore(&ata_ratelimit_lock, flags); | |
6625 | ||
6626 | return rc; | |
6627 | } | |
6628 | ||
c22daff4 TH |
6629 | /** |
6630 | * ata_wait_register - wait until register value changes | |
6631 | * @reg: IO-mapped register | |
6632 | * @mask: Mask to apply to read register value | |
6633 | * @val: Wait condition | |
341c2c95 TH |
6634 | * @interval: polling interval in milliseconds |
6635 | * @timeout: timeout in milliseconds | |
c22daff4 TH |
6636 | * |
6637 | * Waiting for some bits of register to change is a common | |
6638 | * operation for ATA controllers. This function reads 32bit LE | |
6639 | * IO-mapped register @reg and tests for the following condition. | |
6640 | * | |
6641 | * (*@reg & mask) != val | |
6642 | * | |
6643 | * If the condition is met, it returns; otherwise, the process is | |
6644 | * repeated after @interval_msec until timeout. | |
6645 | * | |
6646 | * LOCKING: | |
6647 | * Kernel thread context (may sleep) | |
6648 | * | |
6649 | * RETURNS: | |
6650 | * The final register value. | |
6651 | */ | |
6652 | u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, | |
341c2c95 | 6653 | unsigned long interval, unsigned long timeout) |
c22daff4 | 6654 | { |
341c2c95 | 6655 | unsigned long deadline; |
c22daff4 TH |
6656 | u32 tmp; |
6657 | ||
6658 | tmp = ioread32(reg); | |
6659 | ||
6660 | /* Calculate timeout _after_ the first read to make sure | |
6661 | * preceding writes reach the controller before starting to | |
6662 | * eat away the timeout. | |
6663 | */ | |
341c2c95 | 6664 | deadline = ata_deadline(jiffies, timeout); |
c22daff4 | 6665 | |
341c2c95 TH |
6666 | while ((tmp & mask) == val && time_before(jiffies, deadline)) { |
6667 | msleep(interval); | |
c22daff4 TH |
6668 | tmp = ioread32(reg); |
6669 | } | |
6670 | ||
6671 | return tmp; | |
6672 | } | |
6673 | ||
dd5b06c4 TH |
6674 | /* |
6675 | * Dummy port_ops | |
6676 | */ | |
182d7bba | 6677 | static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) |
dd5b06c4 | 6678 | { |
182d7bba | 6679 | return AC_ERR_SYSTEM; |
dd5b06c4 TH |
6680 | } |
6681 | ||
182d7bba | 6682 | static void ata_dummy_error_handler(struct ata_port *ap) |
dd5b06c4 | 6683 | { |
182d7bba | 6684 | /* truly dummy */ |
dd5b06c4 TH |
6685 | } |
6686 | ||
029cfd6b | 6687 | struct ata_port_operations ata_dummy_port_ops = { |
dd5b06c4 TH |
6688 | .qc_prep = ata_noop_qc_prep, |
6689 | .qc_issue = ata_dummy_qc_issue, | |
182d7bba | 6690 | .error_handler = ata_dummy_error_handler, |
dd5b06c4 TH |
6691 | }; |
6692 | ||
21b0ad4f TH |
6693 | const struct ata_port_info ata_dummy_port_info = { |
6694 | .port_ops = &ata_dummy_port_ops, | |
6695 | }; | |
6696 | ||
1da177e4 LT |
6697 | /* |
6698 | * libata is essentially a library of internal helper functions for | |
6699 | * low-level ATA host controller drivers. As such, the API/ABI is | |
6700 | * likely to change as new drivers are added and updated. | |
6701 | * Do not depend on ABI/API stability. | |
6702 | */ | |
e9c83914 TH |
6703 | EXPORT_SYMBOL_GPL(sata_deb_timing_normal); |
6704 | EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); | |
6705 | EXPORT_SYMBOL_GPL(sata_deb_timing_long); | |
029cfd6b TH |
6706 | EXPORT_SYMBOL_GPL(ata_base_port_ops); |
6707 | EXPORT_SYMBOL_GPL(sata_port_ops); | |
dd5b06c4 | 6708 | EXPORT_SYMBOL_GPL(ata_dummy_port_ops); |
21b0ad4f | 6709 | EXPORT_SYMBOL_GPL(ata_dummy_port_info); |
1eca4365 TH |
6710 | EXPORT_SYMBOL_GPL(ata_link_next); |
6711 | EXPORT_SYMBOL_GPL(ata_dev_next); | |
1da177e4 | 6712 | EXPORT_SYMBOL_GPL(ata_std_bios_param); |
cca3974e | 6713 | EXPORT_SYMBOL_GPL(ata_host_init); |
f3187195 | 6714 | EXPORT_SYMBOL_GPL(ata_host_alloc); |
f5cda257 | 6715 | EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); |
b1c72916 | 6716 | EXPORT_SYMBOL_GPL(ata_slave_link_init); |
ecef7253 | 6717 | EXPORT_SYMBOL_GPL(ata_host_start); |
f3187195 | 6718 | EXPORT_SYMBOL_GPL(ata_host_register); |
f5cda257 | 6719 | EXPORT_SYMBOL_GPL(ata_host_activate); |
0529c159 | 6720 | EXPORT_SYMBOL_GPL(ata_host_detach); |
1da177e4 | 6721 | EXPORT_SYMBOL_GPL(ata_sg_init); |
f686bcb8 | 6722 | EXPORT_SYMBOL_GPL(ata_qc_complete); |
dedaf2b0 | 6723 | EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); |
436d34b3 | 6724 | EXPORT_SYMBOL_GPL(atapi_cmd_type); |
1da177e4 LT |
6725 | EXPORT_SYMBOL_GPL(ata_tf_to_fis); |
6726 | EXPORT_SYMBOL_GPL(ata_tf_from_fis); | |
6357357c TH |
6727 | EXPORT_SYMBOL_GPL(ata_pack_xfermask); |
6728 | EXPORT_SYMBOL_GPL(ata_unpack_xfermask); | |
6729 | EXPORT_SYMBOL_GPL(ata_xfer_mask2mode); | |
6730 | EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); | |
6731 | EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); | |
6732 | EXPORT_SYMBOL_GPL(ata_mode_string); | |
6733 | EXPORT_SYMBOL_GPL(ata_id_xfermask); | |
1da177e4 | 6734 | EXPORT_SYMBOL_GPL(ata_port_start); |
04351821 | 6735 | EXPORT_SYMBOL_GPL(ata_do_set_mode); |
31cc23b3 | 6736 | EXPORT_SYMBOL_GPL(ata_std_qc_defer); |
e46834cd | 6737 | EXPORT_SYMBOL_GPL(ata_noop_qc_prep); |
1da177e4 | 6738 | EXPORT_SYMBOL_GPL(ata_port_probe); |
10305f0f | 6739 | EXPORT_SYMBOL_GPL(ata_dev_disable); |
3c567b7d | 6740 | EXPORT_SYMBOL_GPL(sata_set_spd); |
aa2731ad | 6741 | EXPORT_SYMBOL_GPL(ata_wait_after_reset); |
936fd732 TH |
6742 | EXPORT_SYMBOL_GPL(sata_link_debounce); |
6743 | EXPORT_SYMBOL_GPL(sata_link_resume); | |
0aa1113d | 6744 | EXPORT_SYMBOL_GPL(ata_std_prereset); |
cc0680a5 | 6745 | EXPORT_SYMBOL_GPL(sata_link_hardreset); |
57c9efdf | 6746 | EXPORT_SYMBOL_GPL(sata_std_hardreset); |
203c75b8 | 6747 | EXPORT_SYMBOL_GPL(ata_std_postreset); |
2e9edbf8 JG |
6748 | EXPORT_SYMBOL_GPL(ata_dev_classify); |
6749 | EXPORT_SYMBOL_GPL(ata_dev_pair); | |
1da177e4 | 6750 | EXPORT_SYMBOL_GPL(ata_port_disable); |
67846b30 | 6751 | EXPORT_SYMBOL_GPL(ata_ratelimit); |
c22daff4 | 6752 | EXPORT_SYMBOL_GPL(ata_wait_register); |
1da177e4 | 6753 | EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); |
1da177e4 | 6754 | EXPORT_SYMBOL_GPL(ata_scsi_slave_config); |
83c47bcb | 6755 | EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); |
a6e6ce8e | 6756 | EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); |
34bf2170 TH |
6757 | EXPORT_SYMBOL_GPL(sata_scr_valid); |
6758 | EXPORT_SYMBOL_GPL(sata_scr_read); | |
6759 | EXPORT_SYMBOL_GPL(sata_scr_write); | |
6760 | EXPORT_SYMBOL_GPL(sata_scr_write_flush); | |
936fd732 TH |
6761 | EXPORT_SYMBOL_GPL(ata_link_online); |
6762 | EXPORT_SYMBOL_GPL(ata_link_offline); | |
6ffa01d8 | 6763 | #ifdef CONFIG_PM |
cca3974e JG |
6764 | EXPORT_SYMBOL_GPL(ata_host_suspend); |
6765 | EXPORT_SYMBOL_GPL(ata_host_resume); | |
6ffa01d8 | 6766 | #endif /* CONFIG_PM */ |
6a62a04d TH |
6767 | EXPORT_SYMBOL_GPL(ata_id_string); |
6768 | EXPORT_SYMBOL_GPL(ata_id_c_string); | |
963e4975 | 6769 | EXPORT_SYMBOL_GPL(ata_do_dev_read_id); |
1da177e4 LT |
6770 | EXPORT_SYMBOL_GPL(ata_scsi_simulate); |
6771 | ||
1a660164 | 6772 | EXPORT_SYMBOL_GPL(ata_pio_queue_task); |
1bc4ccff | 6773 | EXPORT_SYMBOL_GPL(ata_pio_need_iordy); |
6357357c | 6774 | EXPORT_SYMBOL_GPL(ata_timing_find_mode); |
452503f9 AC |
6775 | EXPORT_SYMBOL_GPL(ata_timing_compute); |
6776 | EXPORT_SYMBOL_GPL(ata_timing_merge); | |
a0f79b92 | 6777 | EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); |
452503f9 | 6778 | |
1da177e4 LT |
6779 | #ifdef CONFIG_PCI |
6780 | EXPORT_SYMBOL_GPL(pci_test_config_bits); | |
1da177e4 | 6781 | EXPORT_SYMBOL_GPL(ata_pci_remove_one); |
6ffa01d8 | 6782 | #ifdef CONFIG_PM |
500530f6 TH |
6783 | EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); |
6784 | EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); | |
9b847548 JA |
6785 | EXPORT_SYMBOL_GPL(ata_pci_device_suspend); |
6786 | EXPORT_SYMBOL_GPL(ata_pci_device_resume); | |
6ffa01d8 | 6787 | #endif /* CONFIG_PM */ |
1da177e4 | 6788 | #endif /* CONFIG_PCI */ |
9b847548 | 6789 | |
b64bbc39 TH |
6790 | EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); |
6791 | EXPORT_SYMBOL_GPL(ata_ehi_push_desc); | |
6792 | EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); | |
cbcdd875 TH |
6793 | EXPORT_SYMBOL_GPL(ata_port_desc); |
6794 | #ifdef CONFIG_PCI | |
6795 | EXPORT_SYMBOL_GPL(ata_port_pbar_desc); | |
6796 | #endif /* CONFIG_PCI */ | |
7b70fc03 | 6797 | EXPORT_SYMBOL_GPL(ata_port_schedule_eh); |
dbd82616 | 6798 | EXPORT_SYMBOL_GPL(ata_link_abort); |
7b70fc03 | 6799 | EXPORT_SYMBOL_GPL(ata_port_abort); |
e3180499 | 6800 | EXPORT_SYMBOL_GPL(ata_port_freeze); |
7d77b247 | 6801 | EXPORT_SYMBOL_GPL(sata_async_notification); |
e3180499 TH |
6802 | EXPORT_SYMBOL_GPL(ata_eh_freeze_port); |
6803 | EXPORT_SYMBOL_GPL(ata_eh_thaw_port); | |
ece1d636 TH |
6804 | EXPORT_SYMBOL_GPL(ata_eh_qc_complete); |
6805 | EXPORT_SYMBOL_GPL(ata_eh_qc_retry); | |
10acf3b0 | 6806 | EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error); |
022bdb07 | 6807 | EXPORT_SYMBOL_GPL(ata_do_eh); |
a1efdaba | 6808 | EXPORT_SYMBOL_GPL(ata_std_error_handler); |
be0d18df AC |
6809 | |
6810 | EXPORT_SYMBOL_GPL(ata_cable_40wire); | |
6811 | EXPORT_SYMBOL_GPL(ata_cable_80wire); | |
6812 | EXPORT_SYMBOL_GPL(ata_cable_unknown); | |
c88f90c3 | 6813 | EXPORT_SYMBOL_GPL(ata_cable_ignore); |
be0d18df | 6814 | EXPORT_SYMBOL_GPL(ata_cable_sata); |