[mirror_ubuntu-bionic-kernel.git] / drivers / ata / pata_ns87410.c

/*
 * pata_ns87410.c 	- National Semiconductor 87410 PATA for new ATA layer
 *			  (C) 2006 Red Hat Inc
 *			  Alan Cox <alan@redhat.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2, or (at your option)
 *  any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>

#define DRV_NAME "pata_ns87410"
#define DRV_VERSION "0.4.2"

/**
 *	ns87410_pre_reset		-	probe begin
 *	@ap: ATA port
 *
 *	Set up cable type and use generic probe init
 */

static int ns87410_pre_reset(struct ata_port *ap)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	static const struct pci_bits ns87410_enable_bits[] = {
		{ 0x43, 1, 0x08, 0x08 },
		{ 0x47, 1, 0x08, 0x08 }
	};

	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) {
		ata_port_disable(ap);
		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
		return 0;
	}
	ap->cbl = ATA_CBL_PATA40;
	return ata_std_prereset(ap);
}

/**
 *	ns87410_error_handler		-	probe reset
 *	@ap: ATA port
 *
 *	Perform the ATA probe and bus reset sequence plus specific handling
 *	for this hardware. The MPIIX has the enable bits in a different place
 *	to PIIX4 and friends. As a pure PIO device it has no cable detect
 */

static void ns87410_error_handler(struct ata_port *ap)
{
	ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}

/**
 *	ns87410_set_piomode	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Program timing data. This is kept per channel not per device,
 *	and only affects the data port.
 */

static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int port = 0x40 + 4 * ap->port_no;
	u8 idetcr, idefr;
	struct ata_timing at;

	static const u8 activebits[15] = {
		0, 1, 2, 3, 4,
		5, 5, 6, 6, 6,
		6, 7, 7, 7, 7
	};

	static const u8 recoverbits[12] = {
		0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7
	};

	pci_read_config_byte(pdev, port + 3, &idefr);

	if (ata_pio_need_iordy(adev))
		idefr |= 0x04;	/* IORDY enable */
	else
		idefr &= ~0x04;

	if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) {
		dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", adev->pio_mode);
		return;
	}

	at.active = FIT(at.active, 2, 16) - 2;
	at.setup = FIT(at.setup, 1, 4) - 1;
	at.recover = FIT(at.recover, 1, 12) - 1;

	idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];

	pci_write_config_byte(pdev, port, idetcr);
	pci_write_config_byte(pdev, port + 3, idefr);
	/* We use ap->private_data as a pointer to the device currently
	   loaded for timing */
	ap->private_data = adev;
}

/**
 *	ns87410_qc_issue_prot	-	command issue
 *	@qc: command pending
 *
 *	Called when the libata layer is about to issue a command. We wrap
 *	this interface so that we can load the correct ATA timings if
 *	neccessary.
 */

static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;

	/* If modes have been configured and the channel data is not loaded
	   then load it. We have to check if pio_mode is set as the core code
	   does not set adev->pio_mode to XFER_PIO_0 while probing as would be
	   logical */

	if (adev->pio_mode && adev != ap->private_data)
		ns87410_set_piomode(ap, adev);

	return ata_qc_issue_prot(qc);
}

static struct scsi_host_template ns87410_sht = {
	.module			= THIS_MODULE,
	.name			= DRV_NAME,
	.ioctl			= ata_scsi_ioctl,
	.queuecommand		= ata_scsi_queuecmd,
	.can_queue		= ATA_DEF_QUEUE,
	.this_id		= ATA_SHT_THIS_ID,
	.sg_tablesize		= LIBATA_MAX_PRD,
	.max_sectors		= ATA_MAX_SECTORS,
	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
	.emulated		= ATA_SHT_EMULATED,
	.use_clustering		= ATA_SHT_USE_CLUSTERING,
	.proc_name		= DRV_NAME,
	.dma_boundary		= ATA_DMA_BOUNDARY,
	.slave_configure	= ata_scsi_slave_config,
	.bios_param		= ata_std_bios_param,
};

static struct ata_port_operations ns87410_port_ops = {
	.port_disable	= ata_port_disable,
	.set_piomode	= ns87410_set_piomode,

	.tf_load	= ata_tf_load,
	.tf_read	= ata_tf_read,
	.check_status 	= ata_check_status,
	.exec_command	= ata_exec_command,
	.dev_select 	= ata_std_dev_select,

	.freeze		= ata_bmdma_freeze,
	.thaw		= ata_bmdma_thaw,
	.error_handler	= ns87410_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.qc_prep 	= ata_qc_prep,
	.qc_issue	= ns87410_qc_issue_prot,
	.eng_timeout	= ata_eng_timeout,
	.data_xfer	= ata_pio_data_xfer,

	.irq_handler	= ata_interrupt,
	.irq_clear	= ata_bmdma_irq_clear,

	.port_start	= ata_port_start,
	.port_stop	= ata_port_stop,
	.host_stop	= ata_host_stop
};

static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	static struct ata_port_info info = {
		.sht = &ns87410_sht,
		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
		.pio_mask = 0x0F,
		.port_ops = &ns87410_port_ops
	};
	static struct ata_port_info *port_info[2] = {&info, &info};
	return ata_pci_init_one(dev, port_info, 2);
}

static const struct pci_device_id ns87410[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410), },
	{ 0, },
};

static struct pci_driver ns87410_pci_driver = {
        .name 		= DRV_NAME,
	.id_table	= ns87410,
	.probe 		= ns87410_init_one,
	.remove		= ata_pci_remove_one
};

static int __init ns87410_init(void)
{
	return pci_register_driver(&ns87410_pci_driver);
}


static void __exit ns87410_exit(void)
{
	pci_unregister_driver(&ns87410_pci_driver);
}


MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for Nat Semi 87410");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, ns87410);
MODULE_VERSION(DRV_VERSION);

module_init(ns87410_init);
module_exit(ns87410_exit);
Commit	Line	Data
669a5db4 JG	1	/*
	2	* pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer
	3	* (C) 2006 Red Hat Inc
	4	* Alan Cox <alan@redhat.com>
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2, or (at your option)
	9	* any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; see the file COPYING. If not, write to
	18	* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
	19	*/
	20
	21	#include <linux/kernel.h>
	22	#include <linux/module.h>
	23	#include <linux/pci.h>
	24	#include <linux/init.h>
	25	#include <linux/blkdev.h>
	26	#include <linux/delay.h>
	27	#include <scsi/scsi_host.h>
	28	#include <linux/libata.h>
	29
	30	#define DRV_NAME "pata_ns87410"
	31	#define DRV_VERSION "0.4.2"
	32
	33	/**
	34	* ns87410_pre_reset - probe begin
	35	* @ap: ATA port
	36	*
	37	* Set up cable type and use generic probe init
	38	*/
	39
	40	static int ns87410_pre_reset(struct ata_port *ap)
	41	{
	42	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	43	static const struct pci_bits ns87410_enable_bits[] = {
	44	{ 0x43, 1, 0x08, 0x08 },
	45	{ 0x47, 1, 0x08, 0x08 }
	46	};
	47
	48	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) {
	49	ata_port_disable(ap);
	50	printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
	51	return 0;
	52	}
	53	ap->cbl = ATA_CBL_PATA40;
	54	return ata_std_prereset(ap);
	55	}
	56
	57	/**
	58	* ns87410_error_handler - probe reset
	59	* @ap: ATA port
	60	*
	61	* Perform the ATA probe and bus reset sequence plus specific handling
	62	* for this hardware. The MPIIX has the enable bits in a different place
	63	* to PIIX4 and friends. As a pure PIO device it has no cable detect
	64	*/
65
66	static void ns87410_error_handler(struct ata_port *ap)
67	{
68	ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
69	}
70
71	/**
72	* ns87410_set_piomode - set initial PIO mode data
73	* @ap: ATA interface
74	* @adev: ATA device
75	*
76	* Program timing data. This is kept per channel not per device,
77	* and only affects the data port.
78	*/
79
80	static void ns87410_set_piomode(struct ata_port ap, struct ata_device adev)
81	{
82	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
83	int port = 0x40 + 4 * ap->port_no;
84	u8 idetcr, idefr;
85	struct ata_timing at;
86
87	static const u8 activebits[15] = {
88	0, 1, 2, 3, 4,
89	5, 5, 6, 6, 6,
90	6, 7, 7, 7, 7
91	};
92
93	static const u8 recoverbits[12] = {
94	0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7
95	};
96
97	pci_read_config_byte(pdev, port + 3, &idefr);
98
99	if (ata_pio_need_iordy(adev))
100	idefr \|= 0x04; /* IORDY enable */
101	else
102	idefr &= ~0x04;
103
104	if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) {
105	dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", adev->pio_mode);
106	return;
107	}
108
109	at.active = FIT(at.active, 2, 16) - 2;
110	at.setup = FIT(at.setup, 1, 4) - 1;
111	at.recover = FIT(at.recover, 1, 12) - 1;
112
113	idetcr = (at.setup << 6) \| (recoverbits[at.recover] << 3) \| activebits[at.active];
114
115	pci_write_config_byte(pdev, port, idetcr);
116	pci_write_config_byte(pdev, port + 3, idefr);
117	/* We use ap->private_data as a pointer to the device currently
118	loaded for timing */
119	ap->private_data = adev;
120	}
121
122	/**
123	* ns87410_qc_issue_prot - command issue
124	* @qc: command pending
125	*
126	* Called when the libata layer is about to issue a command. We wrap
127	* this interface so that we can load the correct ATA timings if
128	* neccessary.
129	*/
130
131	static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
132	{
133	struct ata_port *ap = qc->ap;
134	struct ata_device *adev = qc->dev;
135
136	/* If modes have been configured and the channel data is not loaded
137	then load it. We have to check if pio_mode is set as the core code
138	does not set adev->pio_mode to XFER_PIO_0 while probing as would be
139	logical */
140
141	if (adev->pio_mode && adev != ap->private_data)
142	ns87410_set_piomode(ap, adev);
143
144	return ata_qc_issue_prot(qc);
145	}
146
147	static struct scsi_host_template ns87410_sht = {
148	.module = THIS_MODULE,
149	.name = DRV_NAME,
150	.ioctl = ata_scsi_ioctl,
151	.queuecommand = ata_scsi_queuecmd,
152	.can_queue = ATA_DEF_QUEUE,
153	.this_id = ATA_SHT_THIS_ID,
154	.sg_tablesize = LIBATA_MAX_PRD,
155	.max_sectors = ATA_MAX_SECTORS,
156	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
157	.emulated = ATA_SHT_EMULATED,
158	.use_clustering = ATA_SHT_USE_CLUSTERING,
159	.proc_name = DRV_NAME,
160	.dma_boundary = ATA_DMA_BOUNDARY,
161	.slave_configure = ata_scsi_slave_config,
162	.bios_param = ata_std_bios_param,
163	};
164
165	static struct ata_port_operations ns87410_port_ops = {
166	.port_disable = ata_port_disable,
167	.set_piomode = ns87410_set_piomode,
168
169	.tf_load = ata_tf_load,
170	.tf_read = ata_tf_read,
171	.check_status = ata_check_status,
172	.exec_command = ata_exec_command,
173	.dev_select = ata_std_dev_select,
174
175	.freeze = ata_bmdma_freeze,
176	.thaw = ata_bmdma_thaw,
177	.error_handler = ns87410_error_handler,
178	.post_internal_cmd = ata_bmdma_post_internal_cmd,
179
180	.qc_prep = ata_qc_prep,
181	.qc_issue = ns87410_qc_issue_prot,
182	.eng_timeout = ata_eng_timeout,
183	.data_xfer = ata_pio_data_xfer,
184
185	.irq_handler = ata_interrupt,
186	.irq_clear = ata_bmdma_irq_clear,
187
188	.port_start = ata_port_start,
189	.port_stop = ata_port_stop,
190	.host_stop = ata_host_stop
191	};
192
193	static int ns87410_init_one(struct pci_dev dev, const struct pci_device_id id)
194	{
195	static struct ata_port_info info = {
196	.sht = &ns87410_sht,
197	.flags = ATA_FLAG_SLAVE_POSS \| ATA_FLAG_SRST,
198	.pio_mask = 0x0F,
199	.port_ops = &ns87410_port_ops
200	};
201	static struct ata_port_info *port_info[2] = {&info, &info};
202	return ata_pci_init_one(dev, port_info, 2);
203	}
204
205	static const struct pci_device_id ns87410[] = {
206	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410), },
207	{ 0, },
208	};
209
210	static struct pci_driver ns87410_pci_driver = {
211	.name = DRV_NAME,
212	.id_table = ns87410,
213	.probe = ns87410_init_one,
214	.remove = ata_pci_remove_one
215	};
216
217	static int __init ns87410_init(void)
218	{
219	return pci_register_driver(&ns87410_pci_driver);
220	}
221
222
223	static void __exit ns87410_exit(void)
224	{
225	pci_unregister_driver(&ns87410_pci_driver);
226	}
227
228
229	MODULE_AUTHOR("Alan Cox");
230	MODULE_DESCRIPTION("low-level driver for Nat Semi 87410");
231	MODULE_LICENSE("GPL");
232	MODULE_DEVICE_TABLE(pci, ns87410);
233	MODULE_VERSION(DRV_VERSION);
234
235	module_init(ns87410_init);
236	module_exit(ns87410_exit);